The access-rules check was exact-only: every listed decoded line had to be
on the card and every card rule listed (missing + extra both fail), so
"READ/WRITE must be always, the RESIZE condition is irrelevant" could not
be expressed.
A rule may now carry accessRules.mode: 'contains' (the editor's Match
selector: Exact default / Contains; the collapsed header badges
"· per operation"): every listed rule is matched per operation - each AM
bit / command entry (RESIZE/INCREASE) must be covered by a card rule with
the same SC list, whatever AM grouping the card uses
(fcpArrRuleOps/fcpArrRuleOpCovered/fcpArrRuleSatisfied) - and the rules not
listed are not checked (no extra side). A form outside the supported
subset (a raw template form, a labelled pairs-form line) compares by exact
string; the proprietary (b8) form stays whole. The check carries mode and
the report notes "compared per operation; other card rules are ignored".
Validation accepts mode in {exact, contains}; the capture keeps writing no
mode (exact).
Docs: help EN/RU. Tests: the per-op matcher, the contains/exact verdicts
(the combined-AM grouping case, a condition mismatch, the RESIZE condition,
not-listed ignored), the editor selector/badge, the validation, the report
note. 886 frontend + 873 Python; sw cache simple-v428.
The runner's three FETCH/TR sites (the proactive-drain action, the
expectation, the cleanup drain) built every TERMINAL RESPONSE from the
script, so a card-announced OPEN CHANNEL during a run was answered
"performed successfully" without opening a channel - SEND DATA was
dropped and RECEIVE DATA returned nothing (silent data loss, broken
applet state).
_test_step_tr now routes 0x40-0x44 through _handle_bip_command: the
terminal answers for real, so the card's channels work inside a run.
The script keeps an escape hatch - a respond with `raw` TLVs or a
non-ok result wins (the applet error-path tests).
The BIP events flow during a run again for the channels the card
itself opened: _bip_data_available and _bip_flush_channel_events no
longer stop at the run guard (a channel only exists because the card
opened it) and the runner flushes the link events after each TR, so an
applet's own HTTP/BIP conversation completes inside a scripted run.
BIP control stays blocked (409).
Tests: the drain/expect/cleanup routing, the raw and non-ok-result
overrides, the run-time data-available and link events. 883 frontend
+ 873 Python; sw cache simple-v427.
A card that re-queues a command immediately after each accepted TR
(live 2026-10-11: the EP BAP card re-issued the same PROVIDE LOCAL
INFORMATION 1100 times) turned the background poll's FETCH/TR chain
into an unbounded loop that held _CARD_LOCK forever - every card
operation, a test run's start included, blocked behind it.
The chain now yields:
- _handle_proactive_chain aborts before the next FETCH while a test run
owns the card (_TEST_RUNNING) - the pending command stays for the
script - and takes max_rounds; the background poll passes
_POLL_CHAIN_MAX = 10, so a chatty card cannot hold the lock.
- _do_status_poll re-arms on its run skip (a heartbeat that never
fetches); _timer_expired and the BIP Data-available event wait during
a run; _bip_flush_channel_events stays quiet too.
- _sim_resume_poll() resumes polling at every run end - the two worker
bodies, their exception paths and the spawn failure.
Also the TR command-details qualifier echo (TS 102 223 6.8.1: the
object shall be identical to the command's): _build_tr,
testscript.build_tr and the interactive _menu_send_response echoed a
hardcoded 00 - harmless for the loop's qual-00 PLI, wrong for any
other qualifier. The menu pendings now carry cmd_qual (parsed in the
on_fetch handler).
Tests: the chain bound/abort (a fake card re-queueing a command), the
poll/timer guards, the resume wiring, the qualifier echo in both
builders. 883 frontend + 865 Python; sw cache simple-v425.
Audit of the UI additions against the documentation; fixed gaps:
- help §1.1: the browser Back/Forward view history (v3.22.5) was
undocumented.
- help §8.9: the TERMINAL RESPONSE result select's spec-table grouping
(v3.23.8) - the guide had it, the help did not.
- help §7: the snapshot comparison is byte-exact for the FCI and the
EF.ARR contents and does not run the semantic access-rules aspect
(that belongs to profiles) - now stated.
- help §3.2 + both READMEs: the two loaded-package RAM operations
(INSTALL [for install] (loaded package), INSTALL [for make
selectable]) were missing; the READMEs also lacked the CAP
compatibility test and still said "two operations" (now five).
- READMEs: the file manager's referenced EF.ARR rules (v3.24.0) and the
profile access-rules check/editor (v3.25.0) added.
- READMEs: the Cards table gained the PIN/PUK fields (v3.11.0) and the
CAT release (v3.12.0).
883 frontend + 858 Python; sw cache simple-v424.
The access-rules form is large for every file rule, so the block now
collapses to its header (a toggle carrying the rule count) and hides
entirely when None is selected - the header keeps the title and the
None/Check radios, so re-enabling is one click (Check also reopens the
block). The expanded state is transient editor UI state (a module map
keyed by the rule index), kept across the editor's re-renders; a rule
without accessRules starts hidden and Check creates the empty block to
build rules in.
Tests: collapsed by default (header + count, no rows), expanded rows,
None and no-accessRules hidden, the enabled-but-empty hint, and the
radio driving the visibility. 882 frontend + 858 Python; sw cache
simple-v424.
The access-rules block was read-only and its Check radio was disabled
without captured lines, so a hand-made rule could not define rules and
captured ones could not be adjusted. It now edits the decoded rule's
structure:
- fcpArrRuleParse/fcpArrRuleEncode parse a canonical decoded line into
the AM (bit mask, RESIZE FILE, INCREASE) + SC condition model and
re-encode it byte-identically (round-trip tested); the template forms
(OR/AND/NOT, SM CRTs, command descriptions) stay raw and removable.
- The editor renders each rule as operation checkboxes (or the command
form) and condition selects (always / never / a key reference with
its usage), with a preview line of the canonical string the check
compares; + rule adds READ always; + condition / x adjust the rows.
- The None/Check radio no longer disables; a new rule can be built by
hand and captured rules adjusted. The stored format is unchanged
(the canonical strings), so capture, the check, the set comparison
and validation are untouched.
Tests: parse/encode round-trips (incl. raw forms), the mutators, the
editor render, plus the existing check tests. 882 frontend + 858
Python; sw cache simple-v424.
The live card references 6F06 from MF-tree files (MF/7F20/6F07 ->
8B 03 6F06 14), but the resolver compared only the path's first
segment: the reference fell back to the ADF.USIM copy instead of the
file's own DF copy (ISO 7816-4 5.4.3.3 / TS 102 221 9.2.7 walk-up) -
masked on this card only because all four copies are byte-identical.
- The server reads the DF.TELECOM and DF.GSM copies too (MF/7F10/6F06,
MF/7F20/6F06 - TS 51.011), best effort.
- fcpArrRules resolves by the file's DF chain (own DF first, then
walking up to MF); a reference with no copy in the chain resolves
only when a single candidate exists, otherwise it stays silent.
- The implicit form prefers the file's DF copy (6F06), walking up to
the MF copy (2F06).
Tests: the DF copy wins over the ADF copy; two candidates outside the
chain stay unresolved; a single one resolves; the implicit walk-up;
the server reads the DF-tree paths. 879 frontend + 858 Python;
sw cache simple-v424.
A profile file rule may carry accessRules {expected, enabled?, ignoreFciRef?}:
the check resolves the file FCI's '8B' security-attribute reference against
the card's (or the snapshot's) EF.ARR copies and compares the decoded rules as
a set - record-number independent, so cards with a different EF.ARR layout
still verify. Missing/extra lines are listed in the report; a file whose FCI
lost the reference fails; a reference that cannot be resolved (no cached
EF.ARR / record out of range) is an unverifiable error.
Capture fills the lines when a profile is created from a card
(pysimArrEnsure) or a snapshot (profilerSnapshotArr), before the contents
ignore list - the rules are the meaningful per-file check, and EF.ARR's own
contents stay ignored by default as before. The editor shows the captured
lines read-only with a None/Check toggle; with exact FCI an optional "Ignore
the EF.ARR reference in the exact FCI" checkbox compares the FCI without the
'8B' value (every other DO stays byte-exact; fcpWithoutArrRef), so a different
record number no longer fails while the rules check owns its meaning.
The snapshot comparison is unchanged (byte-exact EF.ARR + FCI catch record
renumbering). New 'Access rules' aspect in the report/summary with a
matching/missing/extra line diff.
Tests: capture, the four check outcomes, the ignore-FCI path, the
aspect/report, validation. 877 frontend + 857 Python; sw cache simple-v424.
- pysimArrEnsure no longer caches a transient /api/arr fetch failure:
the next file click retries instead of silently showing no ARR rules
for the rest of the card session (a success is still cached per
session, and a session change refetches).
- The help (EN/RU) and both AGENTS state the cache scope: only the MF
(2F06) and ADF.USIM (6F06) ARR copies are read - a reference to
another DF's copy is left unresolved.
- Test: the transient failure retries, a success is cached, a session
change refetches. 869 frontend + 856 Python; sw cache simple-v423.
The file manager's decoded FCI shows the '8B' security attribute
reference (EF_ARR 2F06, record 23). The referenced record's access
rules are now rendered as indented muted lines under that row, decoded
with the existing EF.ARR record decoder (AM_DO/SC_DO conditions).
The server reads the card's ARR copies (MF/2F06 and ADF.USIM/6F06,
best effort) once per card session in _apply_equipped_card and keeps
them as server.arr; GET /api/arr serves the cache without the card
lock, a disconnect clears it, and a write to an ARR copy through
/api/write refreshes it. The PWA fetches it lazily per card session
(pysimArrEnsure, keyed by card_session) and resolves the reference with
the selected file's DF context: an ADF.USIM file uses the ADF's 6F06
copy, the implicit reference form too (ISO 7816-4 5.4.3.3 lookup
order). Unresolvable references stay silent.
The '8B' decode now covers all three ISO 7816-4 Table 25 forms:
implicit ARR byte / FID + record / FID + (SEID, ARR) pairs - the pairs
form was mis-decoded as a record before. A snapshot resolves the same
references offline from its own captured EF.ARR copy.
Tests: the three forms, the resolution (DF preference, out-of-range
silence), the snapshot path, the server read/cache/route/write-refresh.
868 frontend + 856 Python; sw cache simple-v423.
A RAM install that fails at a LOAD step is typically the library-version
gate: the card verifies the CAP's import list when the Import component
completes (JC VM 4.5.2). The failure hint now says so and points at the
CAP compatibility test (Set all 0.0, then restore the lines one at a time
to find the missing package and version), replacing the old "retry with a
smaller LOAD block" advice, which is a red herring for that gate.
The failure popup gains a one-click "Run the CAP compatibility test"
button: it closes the popup, switches the RAM operation selector to compat
and runs it with the same .cap (the file input still holds it and the probe
list is prefilled with its imports), so the diagnostic is one click away.
An INSTALL [for load] refusal now gets its own advice instead of the LOAD
hint: the card refused to open the load file - usually a duplicate load
file from an earlier run (delete the package first, Explore -> Delete), or
rejected load parameters.
Tests: the hint's wording and branches (LOAD vs INSTALL [for load]), the
button handler's op switch. 862 frontend + 842 Python; sw cache
simple-v422.
Pressing the Phone tab's Send (or Rescue) re-sends the profile and starts a
new CAT session. The log was cleared with the rest of the session state,
losing the only record of the card's proactive commands - a common
tweak-the-profile-and-resend loop wiped the history every time.
_resend_terminal_profile now calls _mark_proactive_session(
'terminal-profile') instead: the entries stay, _PROACTIVE_SESSION_START
restarts (so the new session's elapsed values begin at 0) and a boundary
marker entry is appended. The PWA renders the marker as a
'- TERMINAL PROFILE re-sent - new CAT session -' divider (EN/RU).
Equip / disconnect keep the full clear (a card change); the pending-command
cancel, menu timeout and event list reset are unchanged.
Tests: the marker keeps the entries and restarts the timer, the reset still
clears, the re-send path pinned by source (Python) and the renderer's marker
branch (Node). 857 frontend + 842 Python; sw cache simple-v420.
The step editor's result select (the expect's respond, the proactive-drain's
respond/first) offered five symbolic values with no hex. It now offers the
full TS 102 223 v18.3.0 8.12.0 list (00-3F), labelled '<hex> - <alias>' (or
'<hex> - <spec name>'), plus a manual hex entry, and an optional
additional-information byte for the general result (83 02 <result> <info>,
default 00; the 8.12.2 terminal-problem values are suggested through a
datalist).
The script aliases were corrected to the spec: refused 03->22,
not_understood 04->32, modified 06->07, no_response 22->12 - a stored script
using one of them now answers with the corrected value; no_response stays
accepted for compatibility but is no longer offered by the editor.
The server's TR decode tables (_RESULT_NAMES_BASIC/_GENERAL, a GSM 11.14
mix displayed in the proactive log) are replaced by the spec table plus the
8.12.2 additional-information names; the dcs field parses as hex (0A used to
be refused and 10 read as decimal 10); the drain summary's 22 label is fixed.
The result labels are not translated (spec text); the unused RU keys were
removed. Shared fixture frontend/tests/tr_results.json, drift-guarded by
both suites. 855 frontend + 838 Python; sw cache simple-v418.
An unconfigured PLI dictionary answered result-ok with no data object,
which confuses applications that expect data. The dictionary now has a
base layer of sensible defaults for the qualifiers the pinned ETSI specs
define (TS 102 223 8.x, tags per TS 101 220 V18.3.0 Table 7.23):
- location as the test network 001/01 + LAC 0000 (8.19),
- the classic test IMEI 490154203237518 as F-padded BCD (8.20) and its
IMEISV (8.74),
- language 'en' (8.45), Timing Advance (2E/AE), E-UTRAN (8.61; UTRAN +
E-UTRAN for the multiple-technology qualifier 0E),
- automatic search mode (8.75), a full battery (8.76).
An override set through /api/pli-dict wins, and clearing a field restores
its default (the PWA's Save re-renders the effective values; the GET returns
the override or the default for the full qualifier set). The date/time
qualifier stays empty so the host clock keeps answering it; the
3GPP/3GPP2-specific qualifiers (NMR, ESN, MEID, CSG/HNB, WLAN, slices,
CAG, ...) stay empty - the ETSI specs define no contents for them, and a
fabricated object would mislead the application more than no answer.
Verifying the values against the pinned tag table exposed pre-existing bugs
in the PWA's PLI inline codecs, fixed here:
- Timing Advance used C6 (a 3GPP2 tag) -> 2E/AE;
- IMEISV used 94 (the IMEI tag) -> 62/E2;
- Network Search Mode used AD (the Language tag) -> 65/E5, and its labels
were swapped ('00' Manual / '01' Automatic per 8.75);
- the battery field was a percentage where 8.76 is an enum ('00' very low
... '04' full, 'FE'/'FF');
- encImeiPli padded the odd 15th digit with 0 instead of F (TS 124 008).
Docs: help EN/RU, api.md, the guide. Tests: the defaults + the resolution
order (Python), the HTTP endpoint's defaults/override/clearing, the codec
tags/labels and a server-defaults drift guard (Node). 846 frontend +
829 Python; sw cache simple-v414.
A suite may carry `start_reset` (store schema v2, default false; the editor's
"Start with card reset" checkbox): before the run, the server physically
resets the card and runs the full re-initialization - `_card_reset_reinit`
(extracted from the eSIM profile-switch reinit) does reset_card() + equip +
_apply_equipped_card + the shell registration probe.
The reset runs in _test_suite_run_request before the preset/ADM checks:
- the run's preset must still match the post-reset ICCID (a mismatch refuses
the start with a re-select hint),
- a require_adm suite re-verifies the ADM for the new card session (the
latch is per session).
The suite report carries start_reset + reset {ok, iccid, ms}; the PWA shows
"started with a card reset" in the report header and a RESET badge in the
suite list. Mid-run resets stay fatal.
Documented caveat: the init drain consumes the card's initial proactive
commands, so a script cannot catch the first command after the reset (they
stay in the proactive log).
Docs: test-scripts.md, api.md, help EN/RU, repo AGENTS.
Tests: 843 frontend + 827 Python; sw cache simple-v413.
The runner's step loop caught an exception and hard-coded status "error" +
stop, ignoring on_fail - so a file-read of an absent optional file
(re-verified live on 3.22.6: MF/A153/49AC, note "6a82: Wrong parameters -
File not found", on_fail "warning" still stopped the run) could not express
the "read an optional file" pattern (49AC is documented optional: its
absence means no menu password).
The handler now treats a raised error as a failed "Error" check at the
step's level (the message as actual/detail and the note): on_fail "warning"
warns and the run continues, the default still stops; the drain-if-pending
behaviour is unchanged. Every raised exception is treated the same - the
two "file absent" raise paths (pySim's SwMatchError for model files and
probe_file's RuntimeError with the decoded SW for custom FIDs) cannot be
told apart by type, and load-time validation (normalise_script) stays
strict.
Docs: the guide's on_fail paragraph and run-errors list (the 6A82 bullet),
api.md and help EN/RU. Tests: a raising file-read with on_fail "warning"
warns and the next step runs; without on_fail the run still stops.
843 frontend + 821 Python; sw cache simple-v411.
The runner's unexpected-pending-command guard fired for any non-expect step,
so a proactive-drain after a step that answered 91XX failed with
"unexpected proactive command pending (SW 91XX) - add an expect step or a
status action" - contradicting the drain's own doc ("consume whatever the
card announces") and the v3.22.2 RAM recipe ("an expect or a proactive-drain").
The guard now exempts a proactive-drain step: its STATUS poll re-announces
the unfetched command, fetches and answers it, and the drain's final-SW and
pending handling is unchanged (a still-pending card is handed to the next
step, an idle card passes). No pending-length plumbing: STATUS-first keeps
the drain's attempts/log semantics and tolerates a card that dropped the
command. The guard note now names the drain instead of the misleading
"status action" (a status action in that position also trips the guard).
Docs: the drain section in test-scripts.md, api.md's action list and the
help EN/RU drain bullet. Tests: 839 frontend + 819 Python; sw cache
simple-v408.
Two reported gaps:
- a scripted PROVIDE LOCAL INFORMATION expectation answered with an empty
TR - the PLI dictionary (and the host clock for the date/time qualifier)
was silently inert during runs while the poll path used it all along, so
an applet waiting for its data stalled behind a passing expectation. A
POLL INTERVAL expectation likewise never echoed the Duration (6.8.4).
testscript.build_tr() gained `answer_tlvs` (inserted after the Result per
the 6.8.0 order, before text/item/raw) and the shared
_test_terminal_response() wires the expect step, the proactive-drain
action and the run cleanup to it; the script's `raw` overrides, and a
non-success result gets no data object.
- a GP INSTALL/LOAD/DELETE step always failed the default exact-9000 check
although the envelope SW 91XX is the successful answer (the re-announced
SET UP MENU; XX is the pending command's length, never pinnable).
Documented rather than loosening the default: a new "Driving a RAM install
from a script" subsection in docs/test-scripts.md (the 9??? mask + por
any, the per-step pending rule - a proactive-drain/expect after every
91XX step), a sentence at the sw-default bullet, and an scp80
default-pinning test.
Docs: api.md's respond clause, help EN/RU's TR Config note.
Tests: 839 frontend + 812 Python; sw cache simple-v406.
The three nits from the review of the rename/docs commits:
- the PWA comment above TEST_ACTION_KINDS still claimed the final SCP80
counter is written back - the server persists every consumed counter into
the preset and the snapshot carries the latest values (display only);
- test-scripts.md's `por` paragraph regained the RM raw fallback the rewrite
dropped: a remote-management reply that cannot be the compact structure
(its command count exceeds the command script that was sent, or the data
is too short for TS 102 226 5.1.2 Table 5.1) is raw too;
- the RU help label reads "Очистка очереди проактивных команд" (the mixed
Latin "proactive" is gone; the rest of the RU help says "проактивных
команд"). sw cache simple-v405.
Docs/comment only - tests unchanged and green: 839 frontend + 804 Python.
The kind string `proactive` read like an expectation of a proactive command
(`expect` is the step type for that) although the action consumes and answers
them. Renamed everywhere:
- ACTION_KINDS / TEST_ACTION_KINDS (drift-tested), the normaliser branch and
its error strings, the dispatch and the helper names (_test_run_drain,
_drain_require_match/_label);
- the report label is DRAIN and the PWA summary reads "DRAIN x5 require ...
TR ok";
- the editor/collect/summary/problem branches, docs/test-scripts.md
(Proactive drain), docs/api.md, help EN/RU ("Очистка очереди proactive");
- the tests (TestRunnerProactiveDrain, the normalisation/data-check tests).
No stored scripts used the old kind (unpublished series), so there is no
alias and no migration. sw cache simple-v404.
Tests: 839 frontend + 804 Python green.
Second review round on the unpushed v3.20.0-v3.22.0 batch:
- install parameters: a zero memory quota (nv_quota: 0 - the vendor
reference form's C7 02 0000 C8 02 0000) is composed instead of being
dropped as "unset" (only None/blank leaves the TLV out); a truncated EF
length in stk_params is refused instead of read as an empty EF.
- test suites: a suite whose member script is gone is repairable - the
update endpoint accepts pruning a dangling reference (a removal of a
live script stays refused; the PWA's row Delete prunes it), and
reconcile_scripts_to_suites() lists an orphan even when its suite_id
write is refused by the validator, so a stored script that no longer
validates stays visible in the editor and fails at run start with the
message instead of disappearing.
- engine/PWA: the proactive action refuses a check.data (its result data
is the drained-command list - the check was silently ignored); the
vestigial _testScriptDraft is gone; berLenStr emits the 2/3-byte BER
long form (a >255-byte C9 composes correctly).
- docs: api.md (the stop cleanup answers ok, never an automatic cancel;
the server persists the counters - the PWA does not write them back; the
suite bundle import always merges the scripts; the quota-0 note) and
test-scripts.md (the event action covers all modelled events; the
direct-create path needs a suite_id; the format history); help EN/RU
counter wording.
- tests: the zero quota / truncated EF, the prune path, the invalid-script
listing, the proactive data-check refusal, berLenStr and the >255-byte
C9. Tests: 839 frontend + 804 Python; sw cache simple-v403.
The test-script event action edited its fields as a JSON textarea and only
accepted the four events events.py builds; every other event needed the raw
envelope action with hand-copied hex. It now renders the same EVENT_FORMS
form the Phone tab's send dialog uses, for every modelled event (29; no
release gating - a script may target another card).
- PWA: the field renderer/collector is shared (eventFormFieldsHtml /
eventFormValues / eventFormPatternError / eventFormSrc / eventFieldGroupsUpdate);
the Phone tab keeps its ids, its release gating and its onchange updaters,
the step editor uses test-f-ev- ids, the generic group updater and a live
Event data (hex) preview with the one-ENVELOPE check. The event select
lists all EVENT_FORMS events (the numeric keys are decimal strings -
parseInt(k, 10)); the action stores the collected fields, the built data
and the event's source (fixed cfg.src or the cfg.srcField input - the
action never carried src before, so MT call / IMS registration / slices
could not be network-sourced). The JSON textarea is gone.
- engine: the `event` action keeps `fields` validation for the four
server-built events (a stray data hex is ignored) and accepts the
form-built `data` for every other event - hex-validated and checked
against events.EVENT_DATA_MAX (244, the one-ENVELOPE budget; server.py's
_EVENT_DATA_MAX now reads it from events.py). The runner builds the four
at run time (fresh host clock) and sends the stored data for the rest.
- tests: the engine's data path (accepted / missing / malformed / oversized,
the four still fields-built), the runner sending the data (fake scc), the
editor's collect/prefill/patterns/source (Node), the shared helpers.
Docs: test-scripts.md, api.md, help EN/RU. Tests: 838 frontend +
797 Python; sw cache simple-v401.
A suite is the root object: every script belongs to exactly one suite, the
suite holds the ordered member list by reference - the optional setup first,
the members, the optional teardown last - and runs them in one card session,
without resets and without resume.
- test_suites.py: the suite store (test_suites.json, --test-suites), validated
and atomic like the script store: roles normalised (setup first, teardown
last, at most one of each, a script appears once per suite), per-member
on_fail stop/continue and the suite-level require_adm.
- test_scripts.py schema v2: suite_id/require_adm; list_by_suite()/orphans();
the import reports the id_map a bundle import remaps with. v3.21.0 scripts
without a suite are attached once to an auto-created "Imported scripts"
suite (migrate_scripts_to_suites, called from __main__).
- API: /api/test/suites (+ update|delete|import - delete refused while
non-empty; the bundle import imports the scripts first, remaps the suite
references and skips unresolvable ones); the scripts endpoints gain
suite_id/require_adm plus move|copy (delete detaches from the suite first;
a suite update refuses a membership change).
- runner: /api/test/run {suite_id} resolves the members and the preset, runs
the ADM gate, then setup -> members (per-member on_fail) -> teardown. The
teardown always runs on a stop or a failure (skipped only when the card is
gone; it clears the stop flag for its duration); a card reset stops the
suite, skips the remaining members and is flagged. Members' live steps land
in the shared snapshot, their records (status/steps/note/log excerpt/
counters) in _TEST_RUN['suite']; the summary carries the counts, wall time,
preset, the SCP80 counters before/after per keyset and the session flags.
_test_log buffers the semantic lines (bounded) for the report's per-member
excerpts.
- ADM gate (_ensure_adm): a suite/script require_adm verifies the matched
preset's key once per card session (the /api/verify-adm badge sets the same
latch); a failure refuses the start, stamps the session (no automatic
retry) and needs a manual verify.
- PWA: the Test script pill becomes four views - the suite list (default),
the suite editor (the script list: role badges, on_fail, up/down, per-script
Run/Edit/Move/Copy/Delete, Add script with the templates), the script editor
(the step list; a single run shows its result under the steps and is not
preserved) and the suite report (per-member blocks with the step table,
notes and run log; summary; export JSON/Markdown). Suite bundles export/
import; the legacy script export imports into "Imported scripts". EN/RU.
- tests: the suite store/migration, the runner orchestration (order, on_fail,
setup failure, stop, card reset, teardown, per-member logs) and the ADM gate
(Python); the suite HTTP paths; the PWA report/Markdown/wiring (Node).
Tests: 833 frontend + 794 Python; sw cache simple-v397.
Five reported issues, plus the action that makes an explicit drain possible:
- on_fail is honoured by every step failure: an expectation with no pending
command (or a FETCH that returns nothing) fails as a Command/Fetch check at
the step's level instead of raising past it; the default still stops the
run, on_fail "warning" continues (the tolerant consume-if-pending form).
- the run cleanup answers ok (0x00) and keeps draining while the TR answers
91XX (bounded); a cancel is only sent when a script asks for it - it tells
the card the user aborted the session and pushes assertive applets onto an
error path.
- new `proactive` action: STATUS rounds consume every announced command
(respond/first TERMINAL RESPONSE results, attempts/interval_ms bound) until
the card answers 9000; an optional require asserts at least one drained
command (an empty drain fails it), the final SW is the step's SW check and
a still-pending command is handed to the next step. PWA editor + summary +
validation, EN/RU help, docs, action-kind drift test.
- the PoR response form follows the command's TAR: _tar_is_rm (preset role
entries + the TS 101 220 Annex D ISD/RFM allocations) decides; a non-RM
TAR's reply is always raw (TS 102 226 4) - no fabricated status word even
when the bytes happen to parse (01 00 0B 91 ... used to read as SW 000B).
- a secured data too short for the compact structure (a 2-byte applet reply)
is recovered by _por_header_parse (the decode minus the compact parse; a
malformed packet or a failed RC/CC/DS check still yields no por) and
reported raw, so short applet replies are assertable via por.data.
Docs: test-scripts.md, api.md, help EN/RU, repo AGENTS. sw cache simple-v396.
Tests: 825 frontend + 755 Python green.
The counter an operation consumed was re-entered by the PWA on every send
(the form field was filled from the preset and posted back), so a stale tab
could send a value the card rejects (cntr_low), and typing in the field
silently wrote the preset. Now the store is the single source of truth and
the form field is a per-send override (Option B).
- _preset_counter_seed: an explicit `cntr` in the request wins (a hand send,
the counter probe or a pre-built packet may deliberately pick one);
otherwise the preset store's value for the packet's keyset. Wired into
/api/send-ota (the APDU path; the pre-built `sp` path keeps the caller's
bookkeeping value - the packet carries its own counter), /api/ram-install,
/api/ram-install-app, /api/cap-compat, /api/tar-probe and /api/sp-verify
(the reference must use the counter the JS packet was built with).
- the send-ota response echoes the effective `cntr` (a caller that omitted
one learns what was used) and the OTA SEND log line prints it.
- persistence is unchanged and monotonic (presets.set_counter refuses
backwards writes), pinned by tests: an explicit lower counter is used for
the packet but never lowers the store, a higher accepted one is saved.
- PWA: the Secured packet counter field starts empty with the preset's next
value as its placeholder (auto: <cntr>); typing affects that send only and
is never written to the preset (spCntrSyncPreset is gone), spParams /
getRamSpParams omit an empty counter, the RAM/send flows sync only the
local preset copy (forward-only) instead of filling the field, the +/-
buttons start from the effective value, and the preview/verify packet is
built from the effective counter (genSp). Placeholder translated EN/RU.
- the runner and /api/counter-probe keep their existing seeding (the probe
already starts at the failed value and walks above it).
- docs: api.md's optional-`cntr` contract + seeding notes on every endpoint,
help EN/RU 3.1. Tests: 822 frontend + 734 Python; sw cache simple-v393.
The alfa-dsa control-commands run showed the error case: an applet-level
refusal (envelope 6200 for an unknown command) carries no PoR at all, so
a por expectation on such a step can never match. The authoring guide's
status-words section now states that a 62XX/63XX envelope does not
guarantee a response packet - other warning paths still deliver one (the
low-counter case arrives via SEND SHORT MESSAGE) - and that a step
expected to be refused should leave por at its "any" default or assert
"none"; help EN/RU notes the same. docs/test-scripts.md only, no code
change; sw cache simple-v392 (help files are precached).
The script author read por.sw as the envelope SW, so a por.sw expectation
on an applet's own TAR failed with (none).
- docs/test-scripts.md: a 'The three status words (envelope SW / PoR
status / R-APDU SW)' table in the authoring section - where each one
comes from, the script field and the report row - plus a cross-reference
from the por check paragraph; help EN/RU 8.9 points at it.
- a failed por.sw check on a response_type: 'raw' decode carries the check
detail 'the response is application data - an applet's own TAR has no
R-APDU SW; assert it with data' (the PWA renders check details).
- the runner's log prints APP DATA=<hex> (no R-APDU SW) for application
responses instead of the misleading R-APDU SW=(none) data=...; the
compact/scripting lines are unchanged.
- the step editor's custom-PoR block gets a one-line hint about the same.
Tests: 821 frontend + 730 Python; sw cache simple-v391.
Review of 7250dbd:
- the step editor's menu-select form gains a Match case select
(Case-insensitive (default) / Case-sensitive); the step summary flags a
case-sensitive step with (case), the saved params carry
case_sensitive: true only when chosen, and the docs say the editor
authors the flag.
- docs/api.md: fix the 'with an optionally' grammar.
- the Variant-2 menu test's comment claimed a contains match while it is an
exact one; a real contains leg is added ('ыбор' -> item 128).
- timeless rationale for the case-insensitive default; the format note now
dates the change.
sw cache simple-v389 (index.html/help changed).
Tests: 821 frontend + 726 Python.
No test scripts have been authored yet, so the format is still free to
change - the menu-select text match is now case-insensitive by default
(menu labels are UI text; case_sensitive: true still forces an exact-case
match, and a miss on it names the case-insensitive candidates).
Verification against the live card's own bytes (captured 2026-10-04):
- the Annex A Variant 2 Cyrillic menu (ids 128..130) resolves by text and
the case behaviour above is pinned ('кофе' -> item 130);
- the applet's SEND SHORT MESSAGE (alpha 'Отправка...', SMS-SUBMIT to
+79332505884) pins the new alpha and sms checks and the run-log line.
docs/help/api updated; sw cache simple-v388 (help pages changed).
Tests: 819 frontend + 726 Python.
The test scripts get the pieces an applet test needed:
- scp80 check.por accepts an object {status?, sw?, data?} asserting the
decoded PoR of this very exchange (inline or via SEND SHORT MESSAGE);
the evaluation is shared with the expect-step por check
(_por_check_results). The editor's PoR select gains 'custom' with the
three fields (an empty object refuses on save).
- a new alpha content check reads the command's Alpha identifier (05/85,
Annex A coded) - the text check stays bound to the 8D Text string, so a
command carrying both keeps them distinct.
- a new sms content check asserts a SEND SHORT MESSAGE's submit TPDU:
DA / PID / DCS / UDL / UD (the parsed fields are logged and reported;
an applet's own SMS, not the OTA PoR the por check decodes).
- scp80.params.format wraps the C-APDU in the TS 102 226 5.2.1 Command
Scripting template (expanded = AA..., expanded-ae = AE 80...00 00); the
log shows WRAPPED=, the report C-APDU=<effective> format=<fmt>.
- docs: Worksheet 1 addresses an RFM TAR (B00000/B00001/B00010 compact,
B00120/B00140/B00130 expanded) with the own-TAR and MSL/spi1 notes, and
file-write is documented as a direct APDU that does not fire
EVENT_REMOTE_FILE_UPDATE.
Tests: 819 frontend + 724 Python; sw cache simple-v387.
Verifying a script from the log was impossible: the runner wrote no card
lines, SCP80's plaintext C-APDU / secured packet / PoR landed only in the
report, and a menu selection logged nothing (the interactive path showed just
"STATUS poll (menu-select 9000)" / "STATUS -> 9000").
Every step now writes a `TEST-RUN step N:` line family to stderr, request
before response:
- generic actions: the APDU/raw event data sent and the SW/RESP received
(`APDU TX=...`, `ENVELOPE(Event Download) ... data=...`, `READ/UPDATE ... -> SW=...`);
- SCP80: `C-APDU=` (or `SP=`), `SECURED=<hex> (N B) TAR=... SPI1=... SPI2=... CNTR=...`,
the response SW, and the PoR - `PoR[inline] status=... TAR=... CNTR=... raw=...`
plus `R-APDU SW=... data=...` (with the bad-format note);
- expectations: `FETCH=<apdu> -> SW=... <raw>`, `CMD 0x.. <NAME> qual=..`,
`TR=<apdu> -> SW=...`, and `PoR[sms-submit] ...` + `R-APDU` for the SEND
SHORT MESSAGE transport;
- status: `STATUS 1/N -> <sw>` per attempt;
- menu selection: `MENU-SELECT ENVELOPE=<apdu> item=<id> ('<text>') -> SW=...`
(both the runner action and /api/menu-select; the old STATUS lines stay as
context).
The shared secured-packet sender logs each segment's answer
(`OTA SEND: ENVELOPE i/N -> <SW>`), the scp80 step's report `sent` now carries
the C-APDU/SP hex, and `--apdu-trace` remains the raw transport view.
help EN/RU and docs/test-scripts.md gained the "reading the run log" note.
Tests: 816 frontend + 718 Python; sw cache simple-v385.
The audit of the help and READMEs against the current UI found four stale
pill enumerations and five undocumented behaviours:
- The Simulator tab has had five pills since the BIP pill landed; the help
(EN/RU) and both READMEs said "four" and omitted BIP. All four now name it
(the help links §8.10).
- Test-script help: the envelope action's source override (82/83), the event
action's fields being a JSON object in the step editor, edits being written
to the store as you change them (no Save button; an incomplete draft stays
local), and the templates wording adjusted.
- Subscribed-events help: the form's "event data (hex)" preview and how to
copy it into a raw envelope test step.
- SCP80 help: the counter probe's amber outcome (a security verdict after a
counter rejection saves the value and warns).
- Cards help: the key table's "Counter" row aligns with the editor's
"Counter (hex)" heading.
sw cache simple-v384 (help files are precached).
The other-applet batch: a test script can send the common event downloads
semantically instead of raw hex.
- events.py: server-side mirrors of the PWA's event forms for Location status
(0x03), Access technology change (0x0B), Network rejection (0x12 - the
LA/RA/TA object selected by the registration group, the extended EMM cause
and the extended information object) and Data connection status change
(0x1D - status/type/TI plus the optional cause, host-clock 8.39 date-time,
location information, access technology, APN and PDP/PDN/PDU type). Fields
are validated before the run (a bad value is a script error, not a step
failure); `src` overrides the device-identities source (default terminal,
matching the Phone forms).
- The engine gains the `event` action kind; the runner builds and sends it.
The PWA's action-kind list stays in sync (drift-guarded - the guard itself
caught its own regex bug on the first run).
- Byte parity: the vectors are generated from the PWA's own builders and
pinned in tests/test_events.py; the frontend suites assert the same values.
PLMN and SCTS helpers are mirrored too.
- The Phone tab's event form shows the built "Event data (hex)" (updated as
the fields change), so every event without a builder can be used through
the raw `envelope` action.
- The test-step editor offers the event select + a JSON fields textarea;
malformed JSON refuses the save with a clear message.
- docs/test-scripts.md (the semantic-event table, an event example, the
format stamp), docs/api.md and help EN/RU updated.
Tests: 812 frontend + 717 Python; sw cache simple-v381.
The applet-testing batch agreed after v3.15/3.16:
- menu-select by text: the step names the item by `text` (+ `mode`
exact/contains, `case_sensitive`) instead of the install-dependent id
(both or neither is refused); the runner resolves it against the card's
cached menu and raises a step error naming the available items when nothing
(or several items) matches. The cache is refreshed on every SET UP MENU
fetch - the proactive chain and the expect step - so an applet install (new
items/ids after its REFRESH) no longer leaves a stale menu behind. The
step editor offers the id or the text + mode and the client-side pre-check
bounds them.
- TERMINAL RESPONSE object order: both builders emitted the Item identifier
before the Result (and the scripted builder its Text string before it too);
TS 102 223 6.8.0 mandates Command details, Device identities, Result,
Duration, Text string, Item identifier. `testscript.build_tr` and
`_menu_send_response` now follow it; `respond.raw` is documented as
appended after the standard objects, and the exact-byte tests pin the order.
- Text codings: the scripted response codes the GSM default alphabet via the
GSM 03.38 codec ('00' packed, '04' 8-bit) instead of latin-1, keeps '08'
UCS2 and sends the spec's null text string for an empty answer; the packing
helper is shared with the interactive path (`testscript.pack_gsm7`). A
UCS2 GET INPUT answer is documented and tested.
- docs/test-scripts.md gained the handoff brief for the applet agent: the
value-collection table, fill-in worksheets for the two applet scenarios, a
menu-by-text example, the validation checklist and a format stamp; help
EN/RU and docs/api.md updated.
Tests: 809 frontend + 705 Python; sw cache simple-v380.
The scripts lived in the browser's localStorage although only the local
server can run them. The new test_scripts.py store
(~/.pysim-simple-server/test_scripts.json, --test-scripts PATH) sits next to
the card presets: stable uuids and timestamps, atomic writes, and every
mutation is validated with the runner's own engine (the submitted shape is
kept - the normaliser's output is not re-normalisable: it fills defaults
like an 'any' PoR check that the check normaliser then rejects), so a stored
script cannot fail at run start for a validation reason. Import accepts the
old localStorage export as-is (export/import remains the migration path; the
PWA import also takes an exported array).
- /api/test/scripts (GET card-free: path/count + scripts), POST create,
/update, /delete and /import serve the store; the endpoints answer 503
without a store and 500 on a write failure, like the preset endpoints.
- /api/test/run takes a stored script_id (resolved when no inline script is
sent); the PWA sends the edited copy inline plus the id for the report,
and the run snapshot carries script_id.
- The PWA's Test script pill loads from the store, writes through on edits
(debounced name, immediate step/new/copy/delete), reports load/save/delete
failures inline, and exports the portable {name, steps} shape.
Tests: 808 frontend + 701 Python; sw cache simple-v379.
Three gaps blocked SCP80 applet testing from the PWA:
- testRunPreset() still marshalled the pre-v3.8 flat preset fields
(kic/kid/keys/counter/tar/spi1/spi2, all empty on a stored preset), so
every SCP80 run failed with "SCP80 preset is incomplete: no keyset is
defined". The PWA sends the matched preset's id now and the server
resolves it from the store (_test_run_preset_from_body; the inline
`preset` body stays for API callers), so a run always uses the stored
keysets, TARs and counters. Regression tests on both sides.
- testscript._normalise_params dropped the scp80 step's `kvn` (the editor
exposed it and the runner and validation consumed it, so scripts
silently used the preset's first keyset). kvn is validated (1-15) and
passed through; the client-side problem check bounds it too.
- The PoR delivered as a SEND SHORT MESSAGE (PoR-in-submit, SPI2 bit 0x20)
is decoded for the expect step that fetches it: the new `por` content
check asserts the response status / R-APDU SW / response data, decoded
with the preceding scp80 step's context (concatenated SMS accumulate
across expectations). The inline transport stays on the action
(check.por / check.data).
- The new `files` content check asserts the File List of a REFRESH
(TS 102 223 8.18, tag 12/92) - e.g. qualifier 00 = NAA initialization
with full file change notification - as an order-insensitive set of FID
paths.
The step editor exposes both checks; help EN/RU, docs/api.md and the new
authoring reference docs/test-scripts.md document the format. Tests: 803
frontend + 680 Python; sw cache simple-v378.
An audit of every event form against the pinned specs (31.111 7.5.x/9.3,
102 223 8.87, TS 101 220's master tag table) found three missing objects,
three malformed/wrong ones, and settled the slice-data scope.
- 0x00 MT call: the IMS URI object is cut at 100 bytes and now carries the
URI truncated object (8.135, F3 00) when the cut happened.
- 0x1F Slices: the form gains the Partial NSSAI object (8.154, F9, rel 18);
a single envelope carrying it is marked as the Last Envelope (8.79,
F0 00) automatically (7.5.27.2).
- 0x06 Card reader status and 0x07 Language: the builders now emit their
object tags (A0 01 ..., AD ...) - they emitted bare values before.
- 0x18 Incoming IMS data: the IARI tag is F6 (76/F6), not F7 (which is the
IMPU list tag - the two-column 9.3 table had been misread).
- Single-envelope mandate: the event data is capped at 244 bytes (inner 252;
the D6 long-form length and the APDU Lc stay in one byte). The server
refuses more with a 400 and the PWA shows the size error before sending.
Chained (multi-envelope) delivery, the More Data object and envelope
sequences are not implemented - documented in the help and the repo AGENTS.
- Tests: event form vectors (URI truncation, the restored tags, partial /
Last Envelope, the size helper) and the server guard; the release
reference and its PWA/code mirrors gain the three objects and the
corrected IARI key.
- sw cache simple-v375.
elfTagListRetry walks the untried tag-list forms for P1=10 and P1=20
(skipping combinations the main pass already refused via the expandedTried
map; only the tag-list forms are retried - the no-tag-list form never
carries CE - and the walk stops as soon as a version appears). The form
memory can skip the tag-list forms for P1=10 when the Apps listing served
only the no-tag-list form (live 2026-10-02: EP BAP - its P1=10 tag lists
were never queried while the P1=20 retry refused them).
elfPerAidVersions filters to packages that actually have an applet
candidate before the six-query cap: the budget counts queries, not list
positions (EP BAP's first six packages are Oracle/JC-API entries with no
app instances - they consumed the cap and the A113 packages were never
queried).
Docs: help EN/RU, repo AGENTS (v3.13.3 note). sw cache simple-v373.
Tests: 667 Python + 796 frontend green.
ramDeriveElfVersions matches an applet instance to its package through a
shared ramElfAppMatch: the app's C4 (Load File AID) when the card reports
the real one, then the package's module AIDs (the applet instance AIDs),
then the shared-prefix fallback (the same tiers ramElfAppletCandidate uses
for the per-AID queries). Live 2026-10-02 (test-eSIM): the card returns
C4 = the applet's own AID (c4 10 ...3908 for package ...3900), so the old
C4-only derivation filled nothing; the module lists map ...3900 -> ...3908
(9.3), ...0200 -> ...0208/...494D4508 (1.1) and F0414C46416001 ->
F0414C4641600101 (0.1).
The ELF version hint names the remaining case: a package without an
applet instance has no version to derive either (the Oracle
A00000006203010101 stays bare - the card refuses every ELF tag-list form,
so its CE is unreachable).
Docs: help EN/RU, repo AGENTS (v3.13.2 note). sw cache simple-v372.
Tests: 667 Python + 796 frontend green.
The explorer's next-occurrence page (P2=03) is retried in the other
command formats (ramPageFormats: the expanded codings first - the serving
one first when it is expanded - and the compact command string last,
because a compact page attempt can consume the page without delivering
it) and the format that serves a page is kept for the following ones.
Live 2026-10-02 (test-eSIM card): a compact page 2 answered 61B6 and the
chained GET RESPONSE 6A86, after which the AA and AE 80 retries both saw
the occurrence already gone; the AA-wrapped page returns 182 B with the
remaining app instances' CE/CC/EA, while AE 80 is refused. A page that
no format serves ends the listing.
Only an explicit 6310 promise counts for the "(first page only)" flag
(ramExpandedMore): a probe after a 61xx page that every format refuses is
the card's final answer, so that card's ELF listing is no longer flagged
(its expanded registry has three entries; the fourth package exists only
in the compact listing - the ELF tag-list forms and per-AID queries are
refused in every format).
In Auto the explorer also queries entries the bulk listing left without
expanded fields individually by AID (ramAppsMissingDetails, <= 6 packets,
the compact command string carries the GET RESPONSE for 61xx).
Docs: help EN/RU, repo AGENTS (v3.13.1 note). sw cache simple-v371.
Tests: 667 Python + 794 frontend green.
The consumption half of the release guard: the event-download forms hide the
parameters introduced after the effective release and say so.
- catEffectiveReleaseInfo(cards, iccid): the equipped card's preset (ICCID
match, the same rule the SCP80 views use) resolved through presetRelease(),
else the default Rel-12.
- eventFieldsForRelease(cfg, rel): a field whose introduction release (`rel`)
is above the effective one is hidden; a field without a known release is
never hidden. The EVENT_FORMS annotations verified against the pinned
specs/histories: the MT call IMS URI (Rel-12, CR 12.4.0 "URI support in MT
Call event"), the CSG cell selection PLMN ID (Rel-12, 12.1.0), the IMS
registration IMPU list + status code (Rel-11), the slices S-NSSAI-mapping
and rejected objects (Rel-18).
- The form notes what was hidden: "hidden parameters: N · introduced after
Rel-12 · preset: X" (or "default release"), with a tooltip naming the
source; the send path already skips absent fields, so no builder changes.
- help EN/RU; sw cache simple-v369.
The release selector lives in the preset rather than a global chip: presets
already travel with the card (ICCID auto-selection, export/import), and the
operations that will consume the release are preset-aware.
- presets.py: the optional `release` field (4-18; empty = unspecified) joins
PRESET_FIELDS; a value outside 4-18 is refused on save/import; the store
schema version is 5.
- catrelease.py: DEFAULT_RELEASE = 12 and preset_release() - the effective
release is the preset's own value, else Rel-12 (the safe level for cards
whose release is not known; an unset release never filters anything away).
The PWA mirrors both (CAT_RELEASE_DEFAULT + presetRelease()), drift-guarded.
- Cards tab: the editor's header row gains a compact CAT release select
(unspecified / pre-Rel-6 stored as 5 / Rel-6 ... Rel-18); the empty option
names the Rel-12 default and the tooltip explains the guard; the field is
collected, cleared and restored with the other form fields.
- Nothing filters yet: the Simulator's event parameters (stage 3) will use
the effective release.
- docs/api.md + help EN/RU updated; sw cache simple-v368.
- the ADM input capped the key at 8 chars, but the server's _verify_adm
takes 4-16 hex digits (padded to 8 CHV bytes) and the old input had no
limit; maxlength=16 now, with a static guard in html.test.js.
- cardsTarAdd/cardsTarRemove re-rendered the table from the save-path
reader, so an emptied role field was silently refilled with its default.
The renderer no longer invents defaults; a raw reader (cardsTarsFromTable)
feeds Add/Remove and the language-switch refresh, while the save path
(cardsTarsFromForm) keeps the default-filling for the mandatory roles.
- the editor's dynamic TAR/keyset rows now rebuild on a language switch
(refreshDynamicI18n) from what is typed - their placeholders and titles
carry t() strings. (The title/Save label were already refreshed there.)
- dropped the now-unused cardsRoleMsl helper and its test references.
- docs: the ADM is documented as 4-16 hex digits (help EN/RU, api.md,
AGENTS). sw cache simple-v362.
Tests: 665 Python + 784 frontend green; the whole inline PWA script
syntax-checked.
The Cards tab now shows the preset list by default; "Add preset" / "Edit"
open a separate editor view (Save stores and returns to the list, Cancel
discards; ramGoToPreset opens it too). The editor keeps the name/ICCID
header (with From card) and groups its fields into bordered blocks:
- PIN/ADM: the new optional card codes PIN1/PUK1/PIN2/PUK2 (plain text,
4-8 decimal digits) plus ADM, moved out of the top row; nothing consumes
the PIN/PUK codes yet.
- TAR: one uniform table (TAR, MSL, description); the first three rows are
the fixed role entries with the immutable English descriptions "ISD
compact format" / "UICC shared FS RFM compact format" / "ADF FS RFM
compact format"; further rows are deletable with an optional description.
- SCP80 (keyset editor) and SCP81 (PSK pair) as before.
Store: PRESET_FIELDS gains pin1/puk1/pin2/puk2 (optional; whitespace
stripped; 4-8 decimal digits validated on save and import), SCHEMA_VERSION
4, docs/help/AGENTS updated. TAR rows use unified ids (cards-tr-N-*), the
editor switches via cardsShowList/cardsShowEditor.
Tests: 665 Python + 783 frontend green; the whole inline PWA script
syntax-checked. sw cache simple-v361.
Presets drop the card-wide SPI1/SPI2 and the fixed tar/uiccTar/usimTar
fields: a preset now carries `tars` - the three mandatory role entries
(isd/uiccRfm/usimRfm, spec defaults pre-settled) plus free TARs with an
optional description, each with its MSL (Minimum SPI1, TS 102 226
8.2.1.3.2.4). v3.9.1 presets convert on load/import (the spi1 seeds all
three MSLs); duplicate TARs and empty TAR/MSL values are refused; the
store schema version is 3.
Operations derive a packet's SPI1 from its TAR's MSL (_spi1_for_tar): the
RAM ops, the test runner (per-step overrides still win), the counter probe
and each TAR-probe row; the plain send keeps an explicit SPI1 with a
`warning` when it is below the MSL, and a TAR outside the preset without an
explicit SPI1 is refused with a hint. The TAR probe resolves per checked
TAR before sending and reports the effective spi1 per row. The secured
packet form's SPI2 default is 00 (the RAM/probe operations pin their own).
PWA: the Cards form edits the TAR table (role rows with MSL inputs plus
Add/Remove free rows with a description), the list shows a TARs (MSL)
column, the SCP80 TAR field suggests the preset's entries (datalist) and a
preset apply seeds the SPI1 from the operation TAR's MSL with an amber
warning below it; the preset-wide SPI1/SPI2 fields and the header marker's
SPI requirement are gone (completeness = a keyset + the three role entries
with their MSLs). Help EN/RU, docs/api.md and AGENTS updated; sw cache
simple-v358.
Live: TAR probe 000000 at its MSL 16 (registered, por_ok, counter
advanced); a send without spi1 derived 16 (por_ok, counter advanced); a
send with spi1 0A returned the warning and the card refused it (6200, no
counter consumed); an unknown TAR without spi1 was refused with the hint.
The explorer's card-resources block now names the card's ETSI release, using
the same mapping as the CAP analysis (capmem.ETSI_TOOLKIT_RELEASE: uicc.toolkit
version -> REL-N, basis in brackets; the live card's 1.12 -> REL-15/16/17).
The table is mirrored in the PWA (drift-guarded by tests/test_cap_memory.py,
like JC_FRAMEWORK_SDK); the version comes from the expanded registry's CE tag
and degrades to the version hint when the listing has none; SIM-only cards (no
uicc.toolkit) get no label, the same rule as SIM-only CAPs.
- cardEtsiRelease(elfs) (pure) + UICC_TOOLKIT_AID / ETSI_TOOLKIT_RELEASE in the
PWA; rendered after the free-memory lines with a tooltip naming the basis.
- Tests: helper vectors (1.12/1.11/1.5, unknown version, versionless,
SIM-only), the rendering guard, and the table/AID drift guard.
- Help EN/RU; sw cache simple-v354.
The TCA loader's Explore traces settle the format question: it sends the same
P2=00 listing queries wrapped and unchained (`AA0A2208 80F24000024F0000`,
pages `...01024F0000`) - no GET RESPONSE anywhere - while the live card needs
the chain and answers 6700 to the wrapped unchained form; and the live ISD
refuses the compact P2=02 registry query (6700) while serving it wrapped
(`AA11220F 80F2400209 4F005C054F9F70C5CC00` -> 6310 + entries with CE
versions). Both the listing and the registry queries now follow the
operation's command format and fall back across formats.
- ramFormatIsExpanded(fmt) + ramFmtLadder(runFmt, working) (pure): the run's
format first, then expanded, expanded-ae and compact as the last resort; a
format that served data is tried first and never repeated.
- ramGetStatusApdu(p1, p2, fmt): the chain exists in compact only (TS 102 226
5.2.1.1) - an expanded run sends the bare query.
- paginate: the P2=00 listing follows the run's format and pins it per send,
so a GET RESPONSE can never ride inside an expanded packet.
- expandedPass: each registry form goes through the format ladder; the chained
61xx retry is compact-only (it was guarded for 'expanded' but not
'expanded-ae'); the serving format is remembered for the remaining listings
and named in the report ([AA]/[AE 80]); ramExpandedGroups carries it.
- Tests: the helper + ladder vectors, the unchained expanded listing builder
(both codings), the fallback/chain source guards, the report marker.
- Help EN/RU, the repo AGENTS.md; sw cache simple-v353.
Live findings that drove this: the "card counter 0000000000" the low-counter
notice showed is not the card's counter at all (the PoR's CNTR is a copy of
the command's counter, TS 102 225 5.2 table 3, and a rejection leaves it
zeroed); and an earlier "no card accepts the expanded format" observation was
a hand-made template whose declared length did not match its body - the card
validates the lengths and answers with a Bad format TLV.
- _cntr_low_fields(status) reports the verdict as a flag; card_cntr/
suggested_cntr and the UI's "(card counter ...)" text are gone - the value
is not observable. The notice offers a bounded Sync counter probe instead.
- POST /api/counter-probe: a doubling counter ladder (start+1, +2, +4, ...)
with a read-only command until the card accepts one, then accepted+1 is
persisted (monotonic, source counter-probe). Rejected attempts change
nothing on the card; the search stops at a ceiling (default FFFFFFFF, far
below the 40-bit maximum where the counter blocks) and after max_attempts
(default 40, clamped 1-64); a non-cntr_low failure stops it at once.
- _parse_response_scripting decodes the Bad format TLV (90, TS 101 220 table
7.20; error types per TS 102 226 table 5.12) and returns a dict; the PoR
carries bad_format/bad_format_name and _ram_step_result fails the step with
"bad format 02 (wrong length)" instead of falling through to the compact
decoder (which read the AB tag as 171 commands).
- _wrap_expanded_apdu(apdu, form) emits the definite (AA) or the indefinite
(AE 80 ... 00 00) scripting template; the RAM command formats are compact/
expanded/expanded-ae and _ram_detect_format probes compact, then both
expanded codings (the expanded probes use Le='00' and no chained GET
RESPONSE, TS 102 226 5.2.1.1). The RAM form gains a Format selector.
- Live-verified: the verdict carries no value; the probe walked
0x1000001/0x1000003 (low) then 0x1000007 (accepted, stored 0x1000008); the
ISD executes both expanded codings (R-APDU 08A0000000030000000F80, SW 9000)
and a length-mismatched template answers bad_format 02 - decoded now.
- Tests: the ladder, the probe walk + persistence, params validation, both
template forms, the Bad-format TLV (definite and plain tag styles), the
live ISD response through _decode_por, the step-result failure, and the PWA
guards; help EN/RU, docs/api.md, the repo AGENTS.md; sw cache simple-v352.
The six forms that still missed conditional/optional objects now carry them:
- Location status (0x03): Location Information (MCC/MNC + LAC + Cell ID) -
included only for Normal service, as TS 102 223 8.19 requires.
- Channel status (0x0A): Bearer Description (B5, type + parameters) and
Other address (BE, IPv4 dotted / IPv6 hex / the empty "dynamic address"
form); new eventIpBytes() helper.
- Call disconnected (0x02): IMS call disconnection cause (D5, SIP/Q.850 +
2-byte cause).
- Network rejection (0x12): Extended information (F2, CAG ID / NID / RedCap).
- CAG cell selection (0x1E): CAG Human-readable network name list (D7,
80-tagged names).
- Slices status change (0x1F): Allowed slices with S-NSSAI mapping (F7),
Allowed slices (F8), Rejected slices with mapping (D7) and Rejected slices
(B1) beside the served list.
Every implemented event form now carries all the objects of its spec table.
Tests: the new build vectors. Help EN/RU and both AGENTS files; sw
simple-v350.
Group 1 (TS 102 223): Data available (Channel status B8 + channel data length
B7), Display parameters changed (rows/columns + sizing/fonts/effects, C0),
Network search mode change (manual/automatic, E5), Browsing status (browser
error code, E4) and Frames information change (default frame + per-frame info,
E7).
Group 2 (TS 31.111): IMS registration (IMPU list as 80-tagged URIs + IMS status
code), Incoming IMS data (IARI), CAG cell selection (status + mechanism, access
technology, CAG information list) and Slices status change (allowed / rejected
/ served / partially, access technology, served S-NSSAIs) - all with source
network.
Still unimplemented by design: 0x0D Local connection, 0x16 Contactless state
request (3GPP: not required) and the eCAT containers 0x19/0x1B; 0x04/0x05/0x13/
0x1A are data-free, where the one-click send is spec-correct.
Tests: the new build vectors. Help EN/RU, both AGENTS files; sw simple-v349.
catarrh