A suite may carry `start_reset` (store schema v2, default false; the editor's
"Start with card reset" checkbox): before the run, the server physically
resets the card and runs the full re-initialization - `_card_reset_reinit`
(extracted from the eSIM profile-switch reinit) does reset_card() + equip +
_apply_equipped_card + the shell registration probe.
The reset runs in _test_suite_run_request before the preset/ADM checks:
- the run's preset must still match the post-reset ICCID (a mismatch refuses
the start with a re-select hint),
- a require_adm suite re-verifies the ADM for the new card session (the
latch is per session).
The suite report carries start_reset + reset {ok, iccid, ms}; the PWA shows
"started with a card reset" in the report header and a RESET badge in the
suite list. Mid-run resets stay fatal.
Documented caveat: the init drain consumes the card's initial proactive
commands, so a script cannot catch the first command after the reset (they
stay in the proactive log).
Docs: test-scripts.md, api.md, help EN/RU, repo AGENTS.
Tests: 843 frontend + 827 Python; sw cache simple-v413.
The review of the v3.22.7 fix asked when an expect can raise after its
FETCH: the realistic case is the scripted TERMINAL RESPONSE encoding -
_encode_text raises UnicodeEncodeError when respond.text has a non-GSM
character while dcs is 00 (the default) or 04, i.e. after the command was
fetched and with the card's proactive session left unanswered. The other
candidates are guarded (the TPDU/PoR/file-list parsers, the PLI dictionary)
or need the card to be gone (a transport failure between the FETCH and the
TR).
normalise_respond now runs the same coding the TR builder uses and refuses
the script at load with an actionable message ("use dcs 08 (UCS2) for
non-GSM characters"), so the failure happens at save/run start, before any
FETCH; UCS2, ASCII and the empty answer are unaffected.
Also from the review: the guide's run-log line now documents the v3.22.7
format (TEST-RUN step N failed (<level>): ...), and the "unguarded item
text decode" observation proved a non-issue - _decode_stk_text is internally
tolerant (odd UCS2 / unknown prefixes fall back without raising), so the
item parsers are left alone.
Tests: a non-GSM text with the default dcs and with 04 is refused (the
message names dcs 08), UCS2/ASCII/empty pass, and a whole script is refused
with the same message. 843 frontend + 822 Python; sw cache simple-v412.
The runner's step loop caught an exception and hard-coded status "error" +
stop, ignoring on_fail - so a file-read of an absent optional file
(re-verified live on 3.22.6: MF/A153/49AC, note "6a82: Wrong parameters -
File not found", on_fail "warning" still stopped the run) could not express
the "read an optional file" pattern (49AC is documented optional: its
absence means no menu password).
The handler now treats a raised error as a failed "Error" check at the
step's level (the message as actual/detail and the note): on_fail "warning"
warns and the run continues, the default still stops; the drain-if-pending
behaviour is unchanged. Every raised exception is treated the same - the
two "file absent" raise paths (pySim's SwMatchError for model files and
probe_file's RuntimeError with the decoded SW for custom FIDs) cannot be
told apart by type, and load-time validation (normalise_script) stays
strict.
Docs: the guide's on_fail paragraph and run-errors list (the 6A82 bullet),
api.md and help EN/RU. Tests: a raising file-read with on_fail "warning"
warns and the next step runs; without on_fail the run still stops.
843 frontend + 821 Python; sw cache simple-v411.
Findings from the review of the v3.22.5 router:
- the Card reader's pills (file manager / pySim command line / raw APDU)
join the router - the one view group the sweep missed: _pysimSub feeds the
state, pysimSwitchSubtab records, navCurrent/navApply know the tab;
- the nested parser switch (cApduSwitchSubtab('parse'|'response'), used by
the send-to-parser jump) sets _parserSub before recursing, so the
recursion's own parserSwitchSubtab renders the target and the two records
collapse into one history entry instead of two;
- navApply catches a failing replay and falls back to the default tab (the
console carries the failure) instead of letting the exception escape the
popstate handler with a stale _navState;
- the cards editor's recorded preset id comes from _cardsEditId (set by
cardsEdit, cleared by cardsNew/cardsCancelEdit/cardsRemove) instead of
cards[_cardsEditIdx], so a store refetch that shifts the array can no
longer record the wrong preset;
- nav.test.js: pysimSwitchSubtab added to the hook list, a navCurrent
state-building test (all tab branches), the apply-side assertions and the
single-entry parser check.
Tests: 843 frontend + 819 Python; sw cache simple-v410.
The browser Back button now walks the app's own view stack:
- a small state object {tab, sub, parser, view, listtab, preset, suite,
script, item} is recorded on every view switch (navRecord/navCurrent/
navStateKey) via history.pushState - session-only, the URL never changes
(pushState throwing on file:// degrades to no history);
- popstate replays through the same switch functions under a _navApplying
guard (they re-render and re-translate): the seven tabs, every pill set
(SCP80 / Remote APDU + parser / Simulator / SCP81), the Cards list/editor
(preset id), the test-suite views (suite/script ids) and the Profiler
views/list tabs (profile/snapshot ids); unresolvable ids fall back to the
area's default view;
- the in-app Cancel/Back buttons (cardsCancelEdit, testScriptBack,
testBackToSuites, profilerBackToList, profilerSaveProfile) call
navReplace() so their entry is replaced instead of stacked, and the
initial entry is seeded with replaceState so the first Back returns to
the initial view.
The reported untranslated suite Run button was the tip of a larger gap: the
sweep found 21 t() keys without a Russian entry (Run/Suite/Move/Copy/Warning/
Text, the respond-result names, the event-data errors, the CAP tooltip, ...)
- all added, and html.test.js now asserts every t('...') literal and every
data-l10n/data-l10n-title attribute has a LANG_RU entry.
Tests: nav.test.js (the recording/replace hooks, the state-key
canonicalisation, the router core), the i18n completeness test, the
extracted-function stubs in the cards/phone/profiler tests.
842 frontend + 819 Python; sw cache simple-v409.
The runner's unexpected-pending-command guard fired for any non-expect step,
so a proactive-drain after a step that answered 91XX failed with
"unexpected proactive command pending (SW 91XX) - add an expect step or a
status action" - contradicting the drain's own doc ("consume whatever the
card announces") and the v3.22.2 RAM recipe ("an expect or a proactive-drain").
The guard now exempts a proactive-drain step: its STATUS poll re-announces
the unfetched command, fetches and answers it, and the drain's final-SW and
pending handling is unchanged (a still-pending card is handed to the next
step, an idle card passes). No pending-length plumbing: STATUS-first keeps
the drain's attempts/log semantics and tolerates a card that dropped the
command. The guard note now names the drain instead of the misleading
"status action" (a status action in that position also trips the guard).
Docs: the drain section in test-scripts.md, api.md's action list and the
help EN/RU drain bullet. Tests: 839 frontend + 819 Python; sw cache
simple-v408.
Three test-management issues:
- an expectation whose command type did not match the pending command
hard-coded level 'error', so on_fail "warning" tolerated "no command
pending" but not "a different command is pending". The check now honours
the step's on_fail - the tolerant form for "the applet either asks X or
does Y" (the mismatched command is still fetched and answered).
- moving a script between suites could answer 500 and leave two owners:
_test_script_move detached only from the suite named by the script's
suite_id and appended to the target unconditionally, so a duplicate
listing or a stale suite_id (a hand edit, an interrupted move) collided
on the attach. It now detaches from every suite that lists the script,
takes the on_fail from the explicit owner (suite_id if that suite lists
it, else the first lister), updates the script first (a refused
validation changes nothing) and re-attaches with a prune; the same-suite
no-op only applies when the target really is the only lister.
- reconcile_scripts_to_suites() now prunes duplicate listings to the
explicit owner (it only adopted before), so those states self-heal at
startup and after a bundle import; the "Imported scripts" suite is only
created when there are orphans.
Docs: the bundle-import note (importing into the source store duplicates
the suite and its scripts - the round-trip is not idempotent) and the
expectation on_fail clarification.
Tests: 839 frontend + 818 Python; sw cache simple-v407.
Two reported gaps:
- a scripted PROVIDE LOCAL INFORMATION expectation answered with an empty
TR - the PLI dictionary (and the host clock for the date/time qualifier)
was silently inert during runs while the poll path used it all along, so
an applet waiting for its data stalled behind a passing expectation. A
POLL INTERVAL expectation likewise never echoed the Duration (6.8.4).
testscript.build_tr() gained `answer_tlvs` (inserted after the Result per
the 6.8.0 order, before text/item/raw) and the shared
_test_terminal_response() wires the expect step, the proactive-drain
action and the run cleanup to it; the script's `raw` overrides, and a
non-success result gets no data object.
- a GP INSTALL/LOAD/DELETE step always failed the default exact-9000 check
although the envelope SW 91XX is the successful answer (the re-announced
SET UP MENU; XX is the pending command's length, never pinnable).
Documented rather than loosening the default: a new "Driving a RAM install
from a script" subsection in docs/test-scripts.md (the 9??? mask + por
any, the per-step pending rule - a proactive-drain/expect after every
91XX step), a sentence at the sw-default bullet, and an scp80
default-pinning test.
Docs: api.md's respond clause, help EN/RU's TR Config note.
Tests: 839 frontend + 812 Python; sw cache simple-v406.
The three nits from the review of the rename/docs commits:
- the PWA comment above TEST_ACTION_KINDS still claimed the final SCP80
counter is written back - the server persists every consumed counter into
the preset and the snapshot carries the latest values (display only);
- test-scripts.md's `por` paragraph regained the RM raw fallback the rewrite
dropped: a remote-management reply that cannot be the compact structure
(its command count exceeds the command script that was sent, or the data
is too short for TS 102 226 5.1.2 Table 5.1) is raw too;
- the RU help label reads "Очистка очереди проактивных команд" (the mixed
Latin "proactive" is gone; the rest of the RU help says "проактивных
команд"). sw cache simple-v405.
Docs/comment only - tests unchanged and green: 839 frontend + 804 Python.
The kind string `proactive` read like an expectation of a proactive command
(`expect` is the step type for that) although the action consumes and answers
them. Renamed everywhere:
- ACTION_KINDS / TEST_ACTION_KINDS (drift-tested), the normaliser branch and
its error strings, the dispatch and the helper names (_test_run_drain,
_drain_require_match/_label);
- the report label is DRAIN and the PWA summary reads "DRAIN x5 require ...
TR ok";
- the editor/collect/summary/problem branches, docs/test-scripts.md
(Proactive drain), docs/api.md, help EN/RU ("Очистка очереди proactive");
- the tests (TestRunnerProactiveDrain, the normalisation/data-check tests).
No stored scripts used the old kind (unpublished series), so there is no
alias and no migration. sw cache simple-v404.
Tests: 839 frontend + 804 Python green.
Second review round on the unpushed v3.20.0-v3.22.0 batch:
- install parameters: a zero memory quota (nv_quota: 0 - the vendor
reference form's C7 02 0000 C8 02 0000) is composed instead of being
dropped as "unset" (only None/blank leaves the TLV out); a truncated EF
length in stk_params is refused instead of read as an empty EF.
- test suites: a suite whose member script is gone is repairable - the
update endpoint accepts pruning a dangling reference (a removal of a
live script stays refused; the PWA's row Delete prunes it), and
reconcile_scripts_to_suites() lists an orphan even when its suite_id
write is refused by the validator, so a stored script that no longer
validates stays visible in the editor and fails at run start with the
message instead of disappearing.
- engine/PWA: the proactive action refuses a check.data (its result data
is the drained-command list - the check was silently ignored); the
vestigial _testScriptDraft is gone; berLenStr emits the 2/3-byte BER
long form (a >255-byte C9 composes correctly).
- docs: api.md (the stop cleanup answers ok, never an automatic cancel;
the server persists the counters - the PWA does not write them back; the
suite bundle import always merges the scripts; the quota-0 note) and
test-scripts.md (the event action covers all modelled events; the
direct-create path needs a suite_id; the format history); help EN/RU
counter wording.
- tests: the zero quota / truncated EF, the prune path, the invalid-script
listing, the proactive data-check refusal, berLenStr and the >255-byte
C9. Tests: 839 frontend + 804 Python; sw cache simple-v403.
The suite/script ownership invariant could break silently: a suites import
with mode "replace" wiped the suites while their scripts stayed behind
(suite_id pointing at gone suites - invisible in the UI), a scripts import
with mode "replace" left every suite's member list dangling, and a script
whose suite_id disagreed with its listing suite stayed inconsistent.
- server: reconcile_scripts_to_suites() repairs the invariant - a script a
suite lists adopts that suite (the member list is authoritative), a script
no suite lists joins "Imported scripts"; migrate_scripts_to_suites()
delegates to it (the startup migration is the same pass) and the suites
import runs it after loading, so a "replace" adopts the wiped suites'
scripts instead of losing them.
- the scripts import refuses mode "replace" while any suite still lists
scripts (400 naming the dangling references; merge is the normal path).
- nits from the review: a legacy numeric `event` is no longer parsed as hex
in the step summary/error check (0x0A displayed as 0x10), and an integral
float memory quota (a JSON client's 200.0) is accepted.
- tests: the reconciliation (missing suite, listed-but-mismatched,
idempotent), the scripts-replace guard (refused/allowed), the
suites-replace adoption, the float quota, the numeric-event summary.
Tests: 838 frontend + 800 Python; sw cache simple-v402.
The test-script event action edited its fields as a JSON textarea and only
accepted the four events events.py builds; every other event needed the raw
envelope action with hand-copied hex. It now renders the same EVENT_FORMS
form the Phone tab's send dialog uses, for every modelled event (29; no
release gating - a script may target another card).
- PWA: the field renderer/collector is shared (eventFormFieldsHtml /
eventFormValues / eventFormPatternError / eventFormSrc / eventFieldGroupsUpdate);
the Phone tab keeps its ids, its release gating and its onchange updaters,
the step editor uses test-f-ev- ids, the generic group updater and a live
Event data (hex) preview with the one-ENVELOPE check. The event select
lists all EVENT_FORMS events (the numeric keys are decimal strings -
parseInt(k, 10)); the action stores the collected fields, the built data
and the event's source (fixed cfg.src or the cfg.srcField input - the
action never carried src before, so MT call / IMS registration / slices
could not be network-sourced). The JSON textarea is gone.
- engine: the `event` action keeps `fields` validation for the four
server-built events (a stray data hex is ignored) and accepts the
form-built `data` for every other event - hex-validated and checked
against events.EVENT_DATA_MAX (244, the one-ENVELOPE budget; server.py's
_EVENT_DATA_MAX now reads it from events.py). The runner builds the four
at run time (fresh host clock) and sends the stored data for the rest.
- tests: the engine's data path (accepted / missing / malformed / oversized,
the four still fields-built), the runner sending the data (fake scc), the
editor's collect/prefill/patterns/source (Node), the shared helpers.
Docs: test-scripts.md, api.md, help EN/RU. Tests: 838 frontend +
797 Python; sw cache simple-v401.
The report view re-renders the member blocks on every poll while a suite runs
(innerHTML replacement), so an expanded Run log collapsed within 500 ms. The
<details> now carries the stable member index (data-member) and
testRenderReport carries the open state across the re-render; the log content
keeps updating in place.
- frontend/tests/testsuites.test.js: the wiring pin (data-member emitted, the
open state read and restored).
- sw cache simple-v400 (index.html changed); style.css rebuilt.
Tests: 837 frontend + 795 Python.
The v3.22.0 review found that a suite's SCP80 counter state was rebuilt from
the preset snapshot for every member: a second SCP80 script sent the counter
the first had consumed (the store persists the advance, the in-memory preset
copy does not move) and the card answered cntr_low. Reproduced with a
two-member suite (both packets carried CNTR=0000000010).
- runner: `_test_run_script` takes a `shared` counter state (created once per
suite, passed to every member; a single script passes None) and copies the
no-keyset counter back into it, so a suite behaves like one script for
counter bookkeeping. Pinned by a two-member test asserting the second
packet's counter is the first's + 1 and the final counters.
- `_test_drain_pending`: the unknown-length FETCH uses 0xff - `'%02x' % 0x100`
emitted an odd-length APDU (a malformed fetch) when a 9100 SW (length 0)
reached the drain.
- PWA: the suite save adopts the stored suite (the server normalises the
setup-first/teardown-last order); the role rows' up/down buttons are
disabled (only members move); deleting a suite cancels its pending name
debounce (no late 404); `refreshDynamicI18n` redraws the test views, so a
language switch updates the suites list/report immediately.
- tests: the cross-member counter test (Python) and the save-adoption /
move-guard / i18n wiring tests (Node).
Tests: 835 frontend + 795 Python; sw cache simple-v398.
A suite is the root object: every script belongs to exactly one suite, the
suite holds the ordered member list by reference - the optional setup first,
the members, the optional teardown last - and runs them in one card session,
without resets and without resume.
- test_suites.py: the suite store (test_suites.json, --test-suites), validated
and atomic like the script store: roles normalised (setup first, teardown
last, at most one of each, a script appears once per suite), per-member
on_fail stop/continue and the suite-level require_adm.
- test_scripts.py schema v2: suite_id/require_adm; list_by_suite()/orphans();
the import reports the id_map a bundle import remaps with. v3.21.0 scripts
without a suite are attached once to an auto-created "Imported scripts"
suite (migrate_scripts_to_suites, called from __main__).
- API: /api/test/suites (+ update|delete|import - delete refused while
non-empty; the bundle import imports the scripts first, remaps the suite
references and skips unresolvable ones); the scripts endpoints gain
suite_id/require_adm plus move|copy (delete detaches from the suite first;
a suite update refuses a membership change).
- runner: /api/test/run {suite_id} resolves the members and the preset, runs
the ADM gate, then setup -> members (per-member on_fail) -> teardown. The
teardown always runs on a stop or a failure (skipped only when the card is
gone; it clears the stop flag for its duration); a card reset stops the
suite, skips the remaining members and is flagged. Members' live steps land
in the shared snapshot, their records (status/steps/note/log excerpt/
counters) in _TEST_RUN['suite']; the summary carries the counts, wall time,
preset, the SCP80 counters before/after per keyset and the session flags.
_test_log buffers the semantic lines (bounded) for the report's per-member
excerpts.
- ADM gate (_ensure_adm): a suite/script require_adm verifies the matched
preset's key once per card session (the /api/verify-adm badge sets the same
latch); a failure refuses the start, stamps the session (no automatic
retry) and needs a manual verify.
- PWA: the Test script pill becomes four views - the suite list (default),
the suite editor (the script list: role badges, on_fail, up/down, per-script
Run/Edit/Move/Copy/Delete, Add script with the templates), the script editor
(the step list; a single run shows its result under the steps and is not
preserved) and the suite report (per-member blocks with the step table,
notes and run log; summary; export JSON/Markdown). Suite bundles export/
import; the legacy script export imports into "Imported scripts". EN/RU.
- tests: the suite store/migration, the runner orchestration (order, on_fail,
setup failure, stop, card reset, teardown, per-member logs) and the ADM gate
(Python); the suite HTTP paths; the PWA report/Markdown/wiring (Node).
Tests: 833 frontend + 794 Python; sw cache simple-v397.
Five reported issues, plus the action that makes an explicit drain possible:
- on_fail is honoured by every step failure: an expectation with no pending
command (or a FETCH that returns nothing) fails as a Command/Fetch check at
the step's level instead of raising past it; the default still stops the
run, on_fail "warning" continues (the tolerant consume-if-pending form).
- the run cleanup answers ok (0x00) and keeps draining while the TR answers
91XX (bounded); a cancel is only sent when a script asks for it - it tells
the card the user aborted the session and pushes assertive applets onto an
error path.
- new `proactive` action: STATUS rounds consume every announced command
(respond/first TERMINAL RESPONSE results, attempts/interval_ms bound) until
the card answers 9000; an optional require asserts at least one drained
command (an empty drain fails it), the final SW is the step's SW check and
a still-pending command is handed to the next step. PWA editor + summary +
validation, EN/RU help, docs, action-kind drift test.
- the PoR response form follows the command's TAR: _tar_is_rm (preset role
entries + the TS 101 220 Annex D ISD/RFM allocations) decides; a non-RM
TAR's reply is always raw (TS 102 226 4) - no fabricated status word even
when the bytes happen to parse (01 00 0B 91 ... used to read as SW 000B).
- a secured data too short for the compact structure (a 2-byte applet reply)
is recovered by _por_header_parse (the decode minus the compact parse; a
malformed packet or a failed RC/CC/DS check still yields no por) and
reported raw, so short applet replies are assertable via por.data.
Docs: test-scripts.md, api.md, help EN/RU, repo AGENTS. sw cache simple-v396.
Tests: 825 frontend + 755 Python green.
Two reported SCP80/RAM issues, both confirmed against the specs:
- docs/api.md called `stk_params` a "Hex CA TLV", but TS 102 226 8.2.1.3.2.1
puts the CA *inside* the System Specific Parameters EF ('EF'), and the PWA
builds `EF <len> CA <len> ...` (the SIM access domain leads the CA value as
`01 <ad>` / `00`). A client following the doc sent a CA at the wrong level.
- the RAM composition appended the STK part after a caller-composed
C9+EF(quotas) prefix, producing TWO EF objects. The card read the first
(the quotas) and ignored the CA: the install was accepted (por_ok) but the
toolkit parameters were never registered, so no STK menu appeared (live
2026-10-05). Per GPD_SPE_013 v1.1 Table 6-5 (pySim's
gen_install_parameters) the quotas (C7/C8) and the CA share ONE EF; an
EA-form STK part is a sibling of EF (the reference TCA loader's
`C9 00 EF 00 EA ...`).
- server: `_compose_install_params()` (used by `_cap_install_apdu` ->
`_cap_apdu_sequence`, hence /api/ram-install, /api/ram-install-app,
/api/scp81/gen-install and the PWA's install script template) enforces the
rule: a caller-composed EF plus an EF-form `stk_params`, a bare CA, a
malformed EF and quotas next to a non-empty `install_params` are refused
(400 / `{"ok": false}` with the fix named); with an empty `install_params`
the quotas and an EF-form CA are composed into one EF
(`C900 EF{C7?,C8?,CA}`), an EA part stays a sibling.
- the documented `nv_quota`/`volatile_quota` fields are now real (they were
named in the docs but implemented nowhere): integers composing C8/C7.
- PWA: `composeRamInstallParams()` composes the same single EF itself (a
CA-form STK field takes the quotas into its EF, the merged EF travels in
`stk_params`), the RAM install bodies send it, the placeholder shows it
with a note when the quotas moved into the STK EF, and a refused request
(no steps) reports the error instead of "FAILED at step: undefined".
- docs/api.md: the corrected `stk_params` description with both accepted
shapes, the composition rule paragraph with the refusal cases, the fixed
example (`C90000` -> `C900`), and the /api/ram-install-app and
/api/scp81/gen-install cross-references.
- tests: composition unit tests (merge/refusals/EA-sibling) and the
ram-install-app 400 paths (Python); `ramQuotaTlvs`/`composeRamInstallParams`/
`ramInstallParamsCompose` pins incl. the CA merge (Node).
Tests: 824 frontend + 740 Python; sw cache simple-v395.
Two boundary flaws found reviewing v3.20.0:
- /api/send-ota decoded the PoR with the request's `cntr`, not the counter
the packet was actually built with. With the new seeding an omitted
counter is the normal case, so a warning ENVELOPE's verdict - notably the
live card's cntr_low PoR - could fail its RC/CC check and be lost (the
success and the failure path are both fixed). Tests pin the decode counter
on both paths; the failure path also echoes the effective `cntr`.
- the PWA's effective counter (preview / verify / the older-server fallback)
fell back to the preset's first keyset and then 1, while the server's empty
seed builds counter 0 (no preset / kvn 0 / an unknown keyset). A manual
form or a keyless packet then produced a spurious "Verify vs pySim"
MISMATCH and a preview that differed from the delivered packet.
spPresetCounterValue()/spCntrEffective() now mirror _preset_counter_seed()
exactly: the packet's matched keyset, else 0.
- the `OTA SEND: counter not tracked` line reflects the effective counter (a
seeded value is logged too); docs/api.md records that the seed uses the
packet's keyset whatever SPI1.b5b4 says.
Tests: 823 frontend + 737 Python; sw cache simple-v394.
The counter an operation consumed was re-entered by the PWA on every send
(the form field was filled from the preset and posted back), so a stale tab
could send a value the card rejects (cntr_low), and typing in the field
silently wrote the preset. Now the store is the single source of truth and
the form field is a per-send override (Option B).
- _preset_counter_seed: an explicit `cntr` in the request wins (a hand send,
the counter probe or a pre-built packet may deliberately pick one);
otherwise the preset store's value for the packet's keyset. Wired into
/api/send-ota (the APDU path; the pre-built `sp` path keeps the caller's
bookkeeping value - the packet carries its own counter), /api/ram-install,
/api/ram-install-app, /api/cap-compat, /api/tar-probe and /api/sp-verify
(the reference must use the counter the JS packet was built with).
- the send-ota response echoes the effective `cntr` (a caller that omitted
one learns what was used) and the OTA SEND log line prints it.
- persistence is unchanged and monotonic (presets.set_counter refuses
backwards writes), pinned by tests: an explicit lower counter is used for
the packet but never lowers the store, a higher accepted one is saved.
- PWA: the Secured packet counter field starts empty with the preset's next
value as its placeholder (auto: <cntr>); typing affects that send only and
is never written to the preset (spCntrSyncPreset is gone), spParams /
getRamSpParams omit an empty counter, the RAM/send flows sync only the
local preset copy (forward-only) instead of filling the field, the +/-
buttons start from the effective value, and the preview/verify packet is
built from the effective counter (genSp). Placeholder translated EN/RU.
- the runner and /api/counter-probe keep their existing seeding (the probe
already starts at the failed value and walks above it).
- docs: api.md's optional-`cntr` contract + seeding notes on every endpoint,
help EN/RU 3.1. Tests: 822 frontend + 734 Python; sw cache simple-v393.
The alfa-dsa control-commands run showed the error case: an applet-level
refusal (envelope 6200 for an unknown command) carries no PoR at all, so
a por expectation on such a step can never match. The authoring guide's
status-words section now states that a 62XX/63XX envelope does not
guarantee a response packet - other warning paths still deliver one (the
low-counter case arrives via SEND SHORT MESSAGE) - and that a step
expected to be refused should leave por at its "any" default or assert
"none"; help EN/RU notes the same. docs/test-scripts.md only, no code
change; sw cache simple-v392 (help files are precached).
The script author read por.sw as the envelope SW, so a por.sw expectation
on an applet's own TAR failed with (none).
- docs/test-scripts.md: a 'The three status words (envelope SW / PoR
status / R-APDU SW)' table in the authoring section - where each one
comes from, the script field and the report row - plus a cross-reference
from the por check paragraph; help EN/RU 8.9 points at it.
- a failed por.sw check on a response_type: 'raw' decode carries the check
detail 'the response is application data - an applet's own TAR has no
R-APDU SW; assert it with data' (the PWA renders check details).
- the runner's log prints APP DATA=<hex> (no R-APDU SW) for application
responses instead of the misleading R-APDU SW=(none) data=...; the
compact/scripting lines are unchanged.
- the step editor's custom-PoR block gets a one-line hint about the same.
Tests: 821 frontend + 730 Python; sw cache simple-v391.
pySim's CompactRemoteResp was applied to every response packet, so a
third-party applet's own TAR response parsed as count=128/SW=0110/data=''
(live 2026-10-04: the alfa-dsa applet's `80 01 10`) - a fabricated status
word and a lost response.
_decode_por now takes the plaintext command script's length (cmd_len): the
compact structure's command count cannot exceed it (TS 102 226 5.1.2
Table 5.1 - each command needs at least one byte), so a larger count is
classified `response_type: 'raw'`, the secured data becomes
`decoded.last_response_data` (a por.data check matches it) and no SW is
decoded; `secured_data` is exposed in every case.
Callers pass cmd_len where they know the plaintext: the test runner's scp80
step (None for a pre-built packet; carried in ctx['last_scp80'] for the
submit-PoR path), /api/send-ota (both paths), the RAM step sender and the
counter probe; a caller without it keeps the previous parse.
Docs: test-scripts.md and api.md describe the raw fallback.
Tests: 821 frontend + 729 Python; sw cache simple-v390.
Review of 7250dbd:
- the step editor's menu-select form gains a Match case select
(Case-insensitive (default) / Case-sensitive); the step summary flags a
case-sensitive step with (case), the saved params carry
case_sensitive: true only when chosen, and the docs say the editor
authors the flag.
- docs/api.md: fix the 'with an optionally' grammar.
- the Variant-2 menu test's comment claimed a contains match while it is an
exact one; a real contains leg is added ('ыбор' -> item 128).
- timeless rationale for the case-insensitive default; the format note now
dates the change.
sw cache simple-v389 (index.html/help changed).
Tests: 821 frontend + 726 Python.
No test scripts have been authored yet, so the format is still free to
change - the menu-select text match is now case-insensitive by default
(menu labels are UI text; case_sensitive: true still forces an exact-case
match, and a miss on it names the case-insensitive candidates).
Verification against the live card's own bytes (captured 2026-10-04):
- the Annex A Variant 2 Cyrillic menu (ids 128..130) resolves by text and
the case behaviour above is pinned ('кофе' -> item 130);
- the applet's SEND SHORT MESSAGE (alpha 'Отправка...', SMS-SUBMIT to
+79332505884) pins the new alpha and sms checks and the run-log line.
docs/help/api updated; sw cache simple-v388 (help pages changed).
Tests: 819 frontend + 726 Python.
The test scripts get the pieces an applet test needed:
- scp80 check.por accepts an object {status?, sw?, data?} asserting the
decoded PoR of this very exchange (inline or via SEND SHORT MESSAGE);
the evaluation is shared with the expect-step por check
(_por_check_results). The editor's PoR select gains 'custom' with the
three fields (an empty object refuses on save).
- a new alpha content check reads the command's Alpha identifier (05/85,
Annex A coded) - the text check stays bound to the 8D Text string, so a
command carrying both keeps them distinct.
- a new sms content check asserts a SEND SHORT MESSAGE's submit TPDU:
DA / PID / DCS / UDL / UD (the parsed fields are logged and reported;
an applet's own SMS, not the OTA PoR the por check decodes).
- scp80.params.format wraps the C-APDU in the TS 102 226 5.2.1 Command
Scripting template (expanded = AA..., expanded-ae = AE 80...00 00); the
log shows WRAPPED=, the report C-APDU=<effective> format=<fmt>.
- docs: Worksheet 1 addresses an RFM TAR (B00000/B00001/B00010 compact,
B00120/B00140/B00130 expanded) with the own-TAR and MSL/spi1 notes, and
file-write is documented as a direct APDU that does not fire
EVENT_REMOTE_FILE_UPDATE.
Tests: 819 frontend + 724 Python; sw cache simple-v387.
The review of v3.18.3 found the event steps logging twice: the shared sender
writes its generic `ENVELOPE(Event Download): type=... data=...` /
`ENVELOPE SW: ...` pair, and the runner's step-annotated line repeated the
same data. `_send_event_download` gained `log=True`; the runner's envelope
and event branches pass `log=False`, so an event step logs exactly one line -
the annotated one, which already carries the step number, the event name,
the effective source and the response SW. All other callers keep their
output unchanged (netsim, the interactive event form, the BIP/timer paths).
The review's test-pinning gaps are closed:
- the shared sender's per-segment answer line
(`OTA SEND: ENVELOPE i/N -> <SW>`) is asserted in the multi-segment test;
- the scp80 step's report `sent` C-APDU/SP is asserted in the run-log test;
- the single-ENVELOPE-line behaviour (and the source override) is asserted
in the event-action test.
Tests: 816 frontend + 718 Python; sw cache simple-v386.
Verifying a script from the log was impossible: the runner wrote no card
lines, SCP80's plaintext C-APDU / secured packet / PoR landed only in the
report, and a menu selection logged nothing (the interactive path showed just
"STATUS poll (menu-select 9000)" / "STATUS -> 9000").
Every step now writes a `TEST-RUN step N:` line family to stderr, request
before response:
- generic actions: the APDU/raw event data sent and the SW/RESP received
(`APDU TX=...`, `ENVELOPE(Event Download) ... data=...`, `READ/UPDATE ... -> SW=...`);
- SCP80: `C-APDU=` (or `SP=`), `SECURED=<hex> (N B) TAR=... SPI1=... SPI2=... CNTR=...`,
the response SW, and the PoR - `PoR[inline] status=... TAR=... CNTR=... raw=...`
plus `R-APDU SW=... data=...` (with the bad-format note);
- expectations: `FETCH=<apdu> -> SW=... <raw>`, `CMD 0x.. <NAME> qual=..`,
`TR=<apdu> -> SW=...`, and `PoR[sms-submit] ...` + `R-APDU` for the SEND
SHORT MESSAGE transport;
- status: `STATUS 1/N -> <sw>` per attempt;
- menu selection: `MENU-SELECT ENVELOPE=<apdu> item=<id> ('<text>') -> SW=...`
(both the runner action and /api/menu-select; the old STATUS lines stay as
context).
The shared secured-packet sender logs each segment's answer
(`OTA SEND: ENVELOPE i/N -> <SW>`), the scp80 step's report `sent` now carries
the C-APDU/SP hex, and `--apdu-trace` remains the raw transport view.
help EN/RU and docs/test-scripts.md gained the "reading the run log" note.
Tests: 816 frontend + 718 Python; sw cache simple-v385.
The audit of the help and READMEs against the current UI found four stale
pill enumerations and five undocumented behaviours:
- The Simulator tab has had five pills since the BIP pill landed; the help
(EN/RU) and both READMEs said "four" and omitted BIP. All four now name it
(the help links §8.10).
- Test-script help: the envelope action's source override (82/83), the event
action's fields being a JSON object in the step editor, edits being written
to the store as you change them (no Save button; an incomplete draft stays
local), and the templates wording adjusted.
- Subscribed-events help: the form's "event data (hex)" preview and how to
copy it into a raw envelope test step.
- SCP80 help: the counter probe's amber outcome (a security verdict after a
counter rejection saves the value and warns).
- Cards help: the key table's "Counter" row aligns with the editor's
"Counter (hex)" heading.
sw cache simple-v384 (help files are precached).
The four findings from the review of the 3.15-3.18 batch:
- The event step's `_eventFieldsError` flag is cleared at the start of each
collect: fixing malformed JSON used to leave the save refused until the
editor was closed and reopened. Regression test covers invalid -> fixed.
- The script store keeps an entry that no longer validates on load (a
tightened engine rule or a hand edit): it is served, fails at run start with
the validator's message and can be fixed in the editor, instead of being
dropped from memory and erased by the next save. Mutation paths still
refuse it. (The presets store already had this behaviour.)
- Writebacks are serialized per script (`_testWriteChains`): two quick saves
of an unsaved draft no longer create two server-side scripts - the window
could be minutes while a RAM operation holds the card lock. Regression
test asserts one create + one update.
- Deleting a script cancels its pending debounced save and marks it deleted,
so a queued writeback never resurrects it; a create already in flight is
undone with a delete. Regression test covers the pending-save case.
- The event vectors moved to a shared fixture
(frontend/tests/event_vectors.json) asserted by BOTH suites - a one-sided
builder change now fails the other suite instead of drifting silently.
Tests: 816 frontend + 716 Python; sw cache simple-v383.
The events without a semantic builder (MT call, IMS registration, slices, ...)
are network-sourced, but the raw `envelope` action had no `src` override - the
only way to express them was the semantic set. `envelope` now accepts
`src` (82 terminal / 83 network) exactly like the `event` action; the step
editor exposes it and the authoring guide gets the row.
Also: the guide marks `por` as SCP80-only (the normaliser refuses it
elsewhere) and the semantic-events section names the shared src override.
Tests: 813 frontend + 717 Python; sw cache simple-v382.
The other-applet batch: a test script can send the common event downloads
semantically instead of raw hex.
- events.py: server-side mirrors of the PWA's event forms for Location status
(0x03), Access technology change (0x0B), Network rejection (0x12 - the
LA/RA/TA object selected by the registration group, the extended EMM cause
and the extended information object) and Data connection status change
(0x1D - status/type/TI plus the optional cause, host-clock 8.39 date-time,
location information, access technology, APN and PDP/PDN/PDU type). Fields
are validated before the run (a bad value is a script error, not a step
failure); `src` overrides the device-identities source (default terminal,
matching the Phone forms).
- The engine gains the `event` action kind; the runner builds and sends it.
The PWA's action-kind list stays in sync (drift-guarded - the guard itself
caught its own regex bug on the first run).
- Byte parity: the vectors are generated from the PWA's own builders and
pinned in tests/test_events.py; the frontend suites assert the same values.
PLMN and SCTS helpers are mirrored too.
- The Phone tab's event form shows the built "Event data (hex)" (updated as
the fields change), so every event without a builder can be used through
the raw `envelope` action.
- The test-step editor offers the event select + a JSON fields textarea;
malformed JSON refuses the save with a clear message.
- docs/test-scripts.md (the semantic-event table, an event example, the
format stamp), docs/api.md and help EN/RU updated.
Tests: 812 frontend + 717 Python; sw cache simple-v381.
The applet-testing batch agreed after v3.15/3.16:
- menu-select by text: the step names the item by `text` (+ `mode`
exact/contains, `case_sensitive`) instead of the install-dependent id
(both or neither is refused); the runner resolves it against the card's
cached menu and raises a step error naming the available items when nothing
(or several items) matches. The cache is refreshed on every SET UP MENU
fetch - the proactive chain and the expect step - so an applet install (new
items/ids after its REFRESH) no longer leaves a stale menu behind. The
step editor offers the id or the text + mode and the client-side pre-check
bounds them.
- TERMINAL RESPONSE object order: both builders emitted the Item identifier
before the Result (and the scripted builder its Text string before it too);
TS 102 223 6.8.0 mandates Command details, Device identities, Result,
Duration, Text string, Item identifier. `testscript.build_tr` and
`_menu_send_response` now follow it; `respond.raw` is documented as
appended after the standard objects, and the exact-byte tests pin the order.
- Text codings: the scripted response codes the GSM default alphabet via the
GSM 03.38 codec ('00' packed, '04' 8-bit) instead of latin-1, keeps '08'
UCS2 and sends the spec's null text string for an empty answer; the packing
helper is shared with the interactive path (`testscript.pack_gsm7`). A
UCS2 GET INPUT answer is documented and tested.
- docs/test-scripts.md gained the handoff brief for the applet agent: the
value-collection table, fill-in worksheets for the two applet scenarios, a
menu-by-text example, the validation checklist and a format stamp; help
EN/RU and docs/api.md updated.
Tests: 809 frontend + 705 Python; sw cache simple-v380.
The scripts lived in the browser's localStorage although only the local
server can run them. The new test_scripts.py store
(~/.pysim-simple-server/test_scripts.json, --test-scripts PATH) sits next to
the card presets: stable uuids and timestamps, atomic writes, and every
mutation is validated with the runner's own engine (the submitted shape is
kept - the normaliser's output is not re-normalisable: it fills defaults
like an 'any' PoR check that the check normaliser then rejects), so a stored
script cannot fail at run start for a validation reason. Import accepts the
old localStorage export as-is (export/import remains the migration path; the
PWA import also takes an exported array).
- /api/test/scripts (GET card-free: path/count + scripts), POST create,
/update, /delete and /import serve the store; the endpoints answer 503
without a store and 500 on a write failure, like the preset endpoints.
- /api/test/run takes a stored script_id (resolved when no inline script is
sent); the PWA sends the edited copy inline plus the id for the report,
and the run snapshot carries script_id.
- The PWA's Test script pill loads from the store, writes through on edits
(debounced name, immediate step/new/copy/delete), reports load/save/delete
failures inline, and exports the portable {name, steps} shape.
Tests: 808 frontend + 701 Python; sw cache simple-v379.
Three gaps blocked SCP80 applet testing from the PWA:
- testRunPreset() still marshalled the pre-v3.8 flat preset fields
(kic/kid/keys/counter/tar/spi1/spi2, all empty on a stored preset), so
every SCP80 run failed with "SCP80 preset is incomplete: no keyset is
defined". The PWA sends the matched preset's id now and the server
resolves it from the store (_test_run_preset_from_body; the inline
`preset` body stays for API callers), so a run always uses the stored
keysets, TARs and counters. Regression tests on both sides.
- testscript._normalise_params dropped the scp80 step's `kvn` (the editor
exposed it and the runner and validation consumed it, so scripts
silently used the preset's first keyset). kvn is validated (1-15) and
passed through; the client-side problem check bounds it too.
- The PoR delivered as a SEND SHORT MESSAGE (PoR-in-submit, SPI2 bit 0x20)
is decoded for the expect step that fetches it: the new `por` content
check asserts the response status / R-APDU SW / response data, decoded
with the preceding scp80 step's context (concatenated SMS accumulate
across expectations). The inline transport stays on the action
(check.por / check.data).
- The new `files` content check asserts the File List of a REFRESH
(TS 102 223 8.18, tag 12/92) - e.g. qualifier 00 = NAA initialization
with full file change notification - as an order-insensitive set of FID
paths.
The step editor exposes both checks; help EN/RU, docs/api.md and the new
authoring reference docs/test-scripts.md document the format. Tests: 803
frontend + 680 Python; sw cache simple-v378.
The ladder only advances on cntr_low; any other verdict stops the search.
A stop on a non-por_ok verdict after at least one cntr_low keeps the value
anyway - the earlier rejection proves it is above the card's counter - but
the response reports success: false with counter_saved, the verdict and the
saved counter ("something is likely wrong with the security settings");
the PWA shows it amber. Without a prior cntr_low nothing is saved, and a
missing PoR stays an error. actual_response_sms_submit/ussd count as
accepted.
Docs: docs/api.md, repo AGENTS. sw cache simple-v377.
Tests: 672 Python + 798 frontend green.
_counter_probe_params validates SPI2, forces b1 (PoR required; a caller's
00 becomes 01) and defaults to the RAM listing transport 21; the no-PoR
error names the effective SPI2, and ramSyncCounter posts
ramListingSpi2('40') for the RAM view (the failed operation's transport).
Live 2026-10-02 (NP BAP): the probe had sent the plain SCP80 form's 00
(no PoR) - the card answered the ENVELOPE 9000 and sent nothing, so the
probe stopped after one packet with "card verdict: no PoR".
Docs: docs/api.md, repo AGENTS. sw cache simple-v376.
Tests: 670 Python + 798 frontend green.
An audit of every event form against the pinned specs (31.111 7.5.x/9.3,
102 223 8.87, TS 101 220's master tag table) found three missing objects,
three malformed/wrong ones, and settled the slice-data scope.
- 0x00 MT call: the IMS URI object is cut at 100 bytes and now carries the
URI truncated object (8.135, F3 00) when the cut happened.
- 0x1F Slices: the form gains the Partial NSSAI object (8.154, F9, rel 18);
a single envelope carrying it is marked as the Last Envelope (8.79,
F0 00) automatically (7.5.27.2).
- 0x06 Card reader status and 0x07 Language: the builders now emit their
object tags (A0 01 ..., AD ...) - they emitted bare values before.
- 0x18 Incoming IMS data: the IARI tag is F6 (76/F6), not F7 (which is the
IMPU list tag - the two-column 9.3 table had been misread).
- Single-envelope mandate: the event data is capped at 244 bytes (inner 252;
the D6 long-form length and the APDU Lc stay in one byte). The server
refuses more with a 400 and the PWA shows the size error before sending.
Chained (multi-envelope) delivery, the More Data object and envelope
sequences are not implemented - documented in the help and the repo AGENTS.
- Tests: event form vectors (URI truncation, the restored tags, partial /
Last Envelope, the size helper) and the server guard; the release
reference and its PWA/code mirrors gain the three objects and the
corrected IARI key.
- sw cache simple-v375.
The keyset table's column is headed "Counter (hex)" with the placeholder
0000000001, and cardsAdd refuses a save whose counter is not 1-10 hex
digits (empty included; whitespace stripped) - the same rule the store
enforces. The store keeps its import-compatible empty -> 1 default for
API/import callers.
Docs: repo AGENTS (v3.13.4 note). sw cache simple-v374.
Tests: 667 Python + 797 frontend green.
elfTagListRetry walks the untried tag-list forms for P1=10 and P1=20
(skipping combinations the main pass already refused via the expandedTried
map; only the tag-list forms are retried - the no-tag-list form never
carries CE - and the walk stops as soon as a version appears). The form
memory can skip the tag-list forms for P1=10 when the Apps listing served
only the no-tag-list form (live 2026-10-02: EP BAP - its P1=10 tag lists
were never queried while the P1=20 retry refused them).
elfPerAidVersions filters to packages that actually have an applet
candidate before the six-query cap: the budget counts queries, not list
positions (EP BAP's first six packages are Oracle/JC-API entries with no
app instances - they consumed the cap and the A113 packages were never
queried).
Docs: help EN/RU, repo AGENTS (v3.13.3 note). sw cache simple-v373.
Tests: 667 Python + 796 frontend green.
ramDeriveElfVersions matches an applet instance to its package through a
shared ramElfAppMatch: the app's C4 (Load File AID) when the card reports
the real one, then the package's module AIDs (the applet instance AIDs),
then the shared-prefix fallback (the same tiers ramElfAppletCandidate uses
for the per-AID queries). Live 2026-10-02 (test-eSIM): the card returns
C4 = the applet's own AID (c4 10 ...3908 for package ...3900), so the old
C4-only derivation filled nothing; the module lists map ...3900 -> ...3908
(9.3), ...0200 -> ...0208/...494D4508 (1.1) and F0414C46416001 ->
F0414C4641600101 (0.1).
The ELF version hint names the remaining case: a package without an
applet instance has no version to derive either (the Oracle
A00000006203010101 stays bare - the card refuses every ELF tag-list form,
so its CE is unreachable).
Docs: help EN/RU, repo AGENTS (v3.13.2 note). sw cache simple-v372.
Tests: 667 Python + 796 frontend green.
The explorer's next-occurrence page (P2=03) is retried in the other
command formats (ramPageFormats: the expanded codings first - the serving
one first when it is expanded - and the compact command string last,
because a compact page attempt can consume the page without delivering
it) and the format that serves a page is kept for the following ones.
Live 2026-10-02 (test-eSIM card): a compact page 2 answered 61B6 and the
chained GET RESPONSE 6A86, after which the AA and AE 80 retries both saw
the occurrence already gone; the AA-wrapped page returns 182 B with the
remaining app instances' CE/CC/EA, while AE 80 is refused. A page that
no format serves ends the listing.
Only an explicit 6310 promise counts for the "(first page only)" flag
(ramExpandedMore): a probe after a 61xx page that every format refuses is
the card's final answer, so that card's ELF listing is no longer flagged
(its expanded registry has three entries; the fourth package exists only
in the compact listing - the ELF tag-list forms and per-AID queries are
refused in every format).
In Auto the explorer also queries entries the bulk listing left without
expanded fields individually by AID (ramAppsMissingDetails, <= 6 packets,
the compact command string carries the GET RESPONSE for 61xx).
Docs: help EN/RU, repo AGENTS (v3.13.1 note). sw cache simple-v371.
Tests: 667 Python + 794 frontend green.
The consumption half of the release guard: the event-download forms hide the
parameters introduced after the effective release and say so.
- catEffectiveReleaseInfo(cards, iccid): the equipped card's preset (ICCID
match, the same rule the SCP80 views use) resolved through presetRelease(),
else the default Rel-12.
- eventFieldsForRelease(cfg, rel): a field whose introduction release (`rel`)
is above the effective one is hidden; a field without a known release is
never hidden. The EVENT_FORMS annotations verified against the pinned
specs/histories: the MT call IMS URI (Rel-12, CR 12.4.0 "URI support in MT
Call event"), the CSG cell selection PLMN ID (Rel-12, 12.1.0), the IMS
registration IMPU list + status code (Rel-11), the slices S-NSSAI-mapping
and rejected objects (Rel-18).
- The form notes what was hidden: "hidden parameters: N · introduced after
Rel-12 · preset: X" (or "default release"), with a tooltip naming the
source; the send path already skips absent fields, so no builder changes.
- help EN/RU; sw cache simple-v369.
The release selector lives in the preset rather than a global chip: presets
already travel with the card (ICCID auto-selection, export/import), and the
operations that will consume the release are preset-aware.
- presets.py: the optional `release` field (4-18; empty = unspecified) joins
PRESET_FIELDS; a value outside 4-18 is refused on save/import; the store
schema version is 5.
- catrelease.py: DEFAULT_RELEASE = 12 and preset_release() - the effective
release is the preset's own value, else Rel-12 (the safe level for cards
whose release is not known; an unset release never filters anything away).
The PWA mirrors both (CAT_RELEASE_DEFAULT + presetRelease()), drift-guarded.
- Cards tab: the editor's header row gains a compact CAT release select
(unspecified / pre-Rel-6 stored as 5 / Rel-6 ... Rel-18); the empty option
names the Rel-12 default and the tooltip explains the guard; the field is
collected, cleared and restored with the other form fields.
- Nothing filters yet: the Simulator's event parameters (stage 3) will use
the effective release.
- docs/api.md + help EN/RU updated; sw cache simple-v368.
The full "Keysets (number: ...)" context repeated the column's topic; the
header now reads just the byte pair and the counter. The header text node
also carried a literal \u2014 escape (it only rendered correctly once
translatePage() rewrote it) - now a real em dash.
sw cache simple-v367.
The keyset rows were a stack of flex divs with no column labels. They are
now a fixed-layout table like the TAR table: a thead with # (keyset number,
with its tooltip), KIc, KID, KIc key, KID key, Counter and the action
column, and <tr> rows of py-1 px-2 cells with w-full inputs (the columns
drive the widths: 40/56/56 px, the two key columns split the remainder,
112 px for the 10-digit counter). Ids and behaviour are unchanged (the
number span still toggles its red flag, the inputs keep their handlers).
Guards: html.test.js checks the keyset table headers and tbody;
cards_form.test.js checks the row markup. sw cache simple-v366.
Tests: 665 Python + 788 frontend green; the whole inline PWA script
syntax-checked.
The TAR table used the default auto layout with w-full, so the browser
distributed the surplus width across all columns and TAR/MSL/description
looked evenly spread. table-fixed with explicit column widths (TAR w-28,
MSL w-20, action w-12; the description column takes the remainder) and
w-full inputs keep the first two columns tight and left-packed. The ADM
placeholder is just "ADM" now. sw cache simple-v365.
Tests: 665 Python + 787 frontend green; the whole inline PWA script
syntax-checked.
- PIN/ADM: label left, input right (one line per code) - five rows instead
of the stacked label-above-input pairs.
- TAR rows: the TAR and MSL inputs are left-aligned like their headers and
the cells use the header padding (px-2), so values and headers line up
instead of the values floating centred.
- Add TAR and Add keyset: larger and green (bg-emerald-600) and both sit
below their lists, left-aligned (Add keyset moved down from the header
row; the "OTA keysets" label stays above the list). The TAR hint is a
plain paragraph under the button now.
- Guards: html.test.js pins the green/order of both buttons and the
label-left code rows; cards_form.test.js pins the TAR row alignment.
sw cache simple-v364.
Tests: 665 Python + 787 frontend green; the whole inline PWA script
syntax-checked.
The PIN/ADM and TAR fieldsets now share one responsive row (side by side
from lg, stacked below): PIN/ADM is a fixed 224px column (lg:w-56) that
stretches to the TAR box's height, TAR takes the rest (flex-1 min-w-0).
The codes are a vertical list (label above each input) and the hint is
shortened to "All codes are optional" - the specifics stay in the input
placeholders and the help. A structural guard pins the row and the short
hint; sw cache simple-v363.
Tests: 665 Python + 785 frontend green; the whole inline PWA script
syntax-checked.
- the ADM input capped the key at 8 chars, but the server's _verify_adm
takes 4-16 hex digits (padded to 8 CHV bytes) and the old input had no
limit; maxlength=16 now, with a static guard in html.test.js.
- cardsTarAdd/cardsTarRemove re-rendered the table from the save-path
reader, so an emptied role field was silently refilled with its default.
The renderer no longer invents defaults; a raw reader (cardsTarsFromTable)
feeds Add/Remove and the language-switch refresh, while the save path
(cardsTarsFromForm) keeps the default-filling for the mandatory roles.
- the editor's dynamic TAR/keyset rows now rebuild on a language switch
(refreshDynamicI18n) from what is typed - their placeholders and titles
carry t() strings. (The title/Save label were already refreshed there.)
- dropped the now-unused cardsRoleMsl helper and its test references.
- docs: the ADM is documented as 4-16 hex digits (help EN/RU, api.md,
AGENTS). sw cache simple-v362.
Tests: 665 Python + 784 frontend green; the whole inline PWA script
syntax-checked.
catarrh