The 'Fetch expanded registry details' checkbox is now on by default: the
expanded pass carries the package versions, the SD/load-file associations
and the applet menu entries; an explicit stored opt-out is still honoured.
Live 2026-09-30: a card with a non-default ISD AID answered 6A88 to the
reference expanded query (P2=02 + the tag list), so the ELF rows had no
versions. Cards differ in what they accept, so the query is now tried in
three forms (RAM_EXPANDED_FORMS):
tags - the reference tag list (incl. the TS 102 226 EA SCP Registry Data)
noea - the same list without EA (a card that errors on it)
notags - no tag list at all (GPPro's 4F00-only data field); the card
builds the default E3
The first form that answers is remembered for the run and tried first for
the later listings; the ISD gets a single attempt - its 6A88/6A86 is normal
('no data to report', GPPro) and must not poison the detection for the
apps/ELF queries.
Every listing's outcome is reported in the explorer (ramExpandedReport):
'Expanded registry: tag list + EA (Apps, ELFs) - ISD: no expanded data
(6A88) - compact listing used', or 'Expanded registry refused by the card -
compact listing only (package versions unavailable)'; the ELF section hints
when no version came back. Tooltip/help (EN/RU) updated.
sw cache simple-v327; tests: 550 Python / 707 Node.
The compatibility test now runs in the same operation modal as the installs
(live progress from the server's ram_progress, Close disabled until done) and
its result gains a per-AID detail block instead of the comma list:
- the probe summary (probe: 2 imports -> 0.0 . +1 appended);
- the import list as tested (ramCompatImportRows): the CAP's imports with the
version the card was asked for and the CAP's own version when the probe
lowered it, appended synthetic entries and unmatched lines - each with the
resolved library name (jcAidName), so a raw AID list becomes readable rows;
- on a rejection, the failure analysis (ramCompatFailureHtml): which CAP
section the failing block covers (load-file byte range and component names,
'completes Import'), what the card checks at that point (JC VM spec 4.5.2)
or that the import list already passed, the remote status word with its
name, and what the probe state implies (every import at 0.0 -> a missing
package or another load-file check is the cause; otherwise lower the
versions and bisect).
ramCompatVerdict names the remote SW; the inline result keeps the verdict +
short probe note and the modal carries the escaped step lines + the detail
HTML (ramOpModalFinish gained an asHtml mode); the server reports
probe_unmatched as [{'aid', 'version'}] (_probe_unmatched), documented in
docs/api.md. The same failure block for the real install is the next step.
sw cache simple-v325; tests: 550 Python / 703 Node.
The compact (legacy) GET STATUS entry is <aid_len><AID><life cycle>
<privileges> + (P1=10) <module count> (<len><module AID>)*, cross-checked
against GlobalPlatformPro's populate_legacy (the 4th byte is privileges;
0x00 is required for load files). The parser read it as a 'version' one
byte late, so ELF rows showed the module count / the next entry's length as
Version: 00/10 - the compact listing has no version at all; it now comes
from the expanded CE tag (ramFmtVersion: 2 bytes -> major.minor, GP Table
11-37 Note 1) and merges (the bogus compact value no longer blocked it).
New data exposed:
- EA SCP Registry Data (TS 102 226 8.2.1.6) -> 80 Menu Parameters -> the
applet's STK menu entries: STK menu entry: 0x80 (position 1, Enabled)
- unknown registry objects are preserved (rawTlvs) and shown as
'Other registry data: 8F=752B . 90=012D ...' instead of being dropped
- 84 parses the GP coding (one Executable Module AID per TLV, repeated; the
concatenated 4F<len><aid> form stays as fallback) and the ELF expanded
queries add 84 to the tag list (with a tag list the card returns only the
listed tags - the fallback path would otherwise lose the module lists and
their Install buttons)
- life cycle names decode per object kind (GP Tables 11-3..11-6: ISD/card,
app, SD - detected via the Security Domain privilege - and ELF), with
multi-byte 9F70 (02 0700 on live cards) decoding the first byte and
surfacing non-zero extras; the R-APDU parser's LIFECYCLE_MAP labels were
aligned with the same tables
/api/ram-install measures the NV footprint: a silent GET DATA FF21 read
before and after the chain (also on failure) returns nv_before/nv_after/
nv_delta; the reads never fail the operation (no FF21 -> no fields) and the
PWA shows 'NV used: ~N B (free A -> B)' in the install result.
sw cache simple-v324; tests: 548 Python / 698 Node.
The import probe no longer lives in 'Install Package (.cap file)': a
diagnostic that can leave a LOADED-only package does not belong in the
operation meant to produce a working applet. /api/ram-install no longer
takes probe_imports; the install form's probe fieldset is gone.
New RAM operation CAP compatibility test (POST /api/cap-compat): the
server runs the format check, INSTALL [for load] and the LOAD blocks only
up to the block that completes the Import component (_cap_import_end +
_cap_compat_blocks, computed from the load file and the C4 TLV framing),
then stops - no last-block flag, no INSTALL [for install], so nothing is
committed and nothing needs deleting. The verdict (imports_ok,
boundary_block/total_blocks) states it covers the LOAD/import gate only;
the link gate stays the real install's business. Verified on the real
RemMobileID CAP: the boundary is LOAD 1/64, 2/128, 3/240 for 240/120/64 B
blocks - exactly the blocks where the live cards rejected the load.
_probe_import_versions(load_file, overrides, additions) now supports
append-only synthetic imports: +AID=version appends a new entry, the
Import component's size field and the Directory's Import size are patched,
and existing entries keep their positions (constant-pool import indices
stay valid); an AID that is already imported becomes a version override.
This is the card-capability query ('does this card export package X at
>= Y?') without building a probe applet.
PWA: new op section (CAP file + analysis + the version list + block size),
ramCompatTest with inline results and ramCompatVerdict, ramProbeParse
understands +AID=version; help EN/RU documents the operation, the two-step
bisect and the gate scope.
sw cache simple-v321; tests: 538 Python / 686 Node.
- Explore runs inline: no blocking modal (that stays for the install
operations, which can leave a half-loaded package; Explore leaves the
card consistent). A test guards that ramExplore never calls the modal.
- Minimal success line: just OK - the details live in the explorer below;
error runs keep the detailed 'Partial - ...' line.
- Counts moved into the section headings (Applications / Applet Instances
(n), Executable Load Files (ELFs) / Packages (n)); the redundant '1 ISD'
count is gone (P1=80 returns the ISD as a single occurrence, GP
11.4.2.1).
- The RAM command format line gained a tooltip: compact = TS 102 226
5.2.1 command string, expanded = the AA/22 scripting template (5.2.1.0),
detected per operation with a read-only GET STATUS probe.
- The expanded-registry checkbox is relabelled 'Fetch expanded registry
details (load-file / SD associations)' with a tooltip (extra secured
packets, card support varies, the fallback is automatic) and is now a
sticky per-browser preference (simple_ram_expanded).
sw cache simple-v318; tests: 531 Python / 681 Node.
The CAP details' Platform row named only the Java Card level; it now also
shows the ETSI/3GPP release the UICC API imports come from, with its basis
in brackets, e.g. 'Java Card >= 2.2.2 - ETSI REL-7 (uicc.toolkit 1.4) -
CAP format 2.1'.
capmem.ETSI_TOOLKIT_RELEASE maps the uicc.toolkit export version to the
release, sourced from the workspace corpus: sim-tools/ETSI-REL.md for the
prepared trees (api21_rel7_export_files carries uicc.toolkit 1.4 = the
REL-7 jar, api21_export_files 1.11 = the REL-12 jar) and
sim-tools/etsi/102241/README.md's package-version table for the rest
(1.0 -> REL-6/7, 1.3 -> REL-8, 1.5 -> REL-9, 1.12-1.14 -> REL-15..18; the
1.11 spec range is 13.01-14.02 but the tree the builds use is REL-12).
Exposed as requires_etsi_release/requires_etsi_basis in /api/cap-info and
the CLI; SIM-only CAPs (no uicc.toolkit) get no label.
Verified: RemMobileID -> REL-7 (uicc.toolkit 1.4), AlfaDSA -> REL-12
(uicc.toolkit 1.11). sw cache simple-v317; tests: 531 Python / 677 Node.
The probe's checkbox described the mechanism ('Rewrite the CAP's import
versions before the load'); it now reads 'Enable import probe' (purpose
first) with the mechanism in a tooltip, and the field carries two short
hint lines: what the card checks while loading, and the workflow (Set all
0.0 first; if the LOAD passes the list was the cause, then restore one
line at a time to find the package/version the card lacks).
Static tooltips are translatable now via data-l10n-title (handled by
translatePage, checked against LANG_RU by html.test.js together with
data-l10n); the help's RAM-install section documents the two-step
workflow (EN/RU).
sw cache simple-v316; tests: 530 Python / 676 Node.
Cards that cannot satisfy the CAP's import list reject the LOAD as soon
as the Import component is complete (live 2026-09-29: 6438/6985 in the
block containing its last byte, on several cards incl. an eUICC profile
whose ISD is not the default AID and which does not answer GET DATA 0066 -
no direct platform-version readout exists).
_probe_import_versions (pure) rewrites the Import component's two version
bytes per entry in the assembled load file: same length, component sizes,
Directory and offsets untouched; unknown AIDs and bad versions are
rejected. /api/ram-install takes probe_imports ({'all': '0.0'} or
per-AID), echoes the applied changes in the response and logs them. The
PWA's RAM install form gains a collapsed Import probe fieldset (checkbox,
AID=version lines prefilled from the CAP analysis, 'Set all 0.0') and the
result line reports the applied changes. Diagnostic only - never used for
a real install.
Also verified _cap_parse's component order against the reference TCA load
trace (Header, Directory, Import, Applet, Class, Method, StaticField,
ConstantPool, RefLocation, Descriptor - Import before Applet, not
ascending tag order), so the order is correct and the import list remains
the prime suspect.
sw cache simple-v315; tests: 530 Python / 676 Node.
The TERMINAL PROFILE chain parsed the SET UP MENU title with 'tag == 0x05'
only, so the live Alfa card's title (CR-set 0x85, 'Alfa Mobile') was
dropped: /api/menu returned items without a title and the PWA showed
'No menu set by the card' - card-specific only because cards pick the tag
variant (this one sends plain 0x8F items and a CR-set title in the same
command).
- _parse_setup_menu_command (pure, tested with the live FETCH bytes)
replaces the inline parse; the PWA shows a title-less menu as 'STK: Menu'
instead of 'No menu set by the card' (stkMenuLabel, pure).
- _cmd_tlv is now the single lookup helper: exact tag, then tag ^ 0x80
(bit 8 is the CR flag, TS 101 220 7.1.1); the old '| 0x80'-only helper and
the duplicate _cmd_tlv_any are gone.
- Remaining single-style checks fixed: _parse_setup_menu_items (0x8F/0x0F),
_parse_select_item title (0x85/0x05), _find_sms_tpdu (0x8B/0x0B - the
plain variant lost the SEND SHORT MESSAGE PoR TPDU), the response
scripting parsers (R-APDU 0x23/0xA3, executed count 0x80/0x00) and the
FF21 resource tags (0x81-0x83/0x01-0x03).
- tests/test_tag_variants.py flips the CR flag on every top-level tag of
real command fixtures and asserts identical parse results for all
parsers (verified to fail when a single-style lookup is reintroduced).
sw cache simple-v313; tests: 524 Python / 675 Node.
The menu chain paused only for DISPLAY TEXT / SELECT ITEM / SET UP MENU,
so a GET INPUT was auto-answered with a bare success TR and no Text
string - the live RemMobileID PIN prompt got an empty answer.
Server: _parse_get_inkey/_parse_get_input read the prompt, qualifier
flags (digits-only, UCS2, Yes/No, immediate, hidden, packed, help),
Response length 91 and Default Text 9D; the fetch handler pauses with
them; _menu_send_response(..., text=) validates the answer (digits set,
min/max, one char for GET INKEY) and builds the Text string TLV 8D in the
requested coding (SMS unpacked 04 / UCS2 08 / packed 00 via _pack_gsm7),
Yes/No as 01/00, empty input as the null text string, help as result 13
and the variable-timeout Duration echoed (6.8.4). /api/menu-respond
takes text; /api/stk-status carries pending_data so a card-initiated
prompt opens the panel; _decode_cmd decodes both commands.
PWA: stkInputHtml/stkInputHint/stkInputValidate render the constrained
panel (password field for hidden entry, numeric keyboard, default text,
Yes/No buttons, help, immediate-digit auto-submit); OK submits through
stkMenuOk; the poll opens the panel for card-initiated prompts.
sw cache simple-v311; tests: 517 Python / 674 Node.
_send_envelope defined its SEND SHORT MESSAGE capture handler inside the
91xx branch, but the 'STATUS poll (PoR not captured)' path used it: a
packet whose ENVELOPE answered 9000 and whose late PoR arrived on the
STATUS poll raised UnboundLocalError, returned 500 and aborted the RAM
operation mid-packet with the card's command left pending (live
2026-09-29, 120-byte LOAD blocks). The handler is now defined for every
path, and the late-PoR poll runs only after a packet's last segment
(poll_status from _send_secured_packet) - a concatenated download makes
no spurious mid-packet STATUS exchanges.
The PWA annotates every LOAD step with the CAP components its block
covers (ramStepComponents: 'completes Import' / 'inside Method' /
'Header...Import') and ramInstallFailHint names the component the failing
block completed - the live import-verification rejection lands in the
block completing Import (6438/6985 at both 240 B and 64 B blocks).
sw cache simple-v310; tests: 509 Python / 672 Node.
capmem derives the minimum platform from the CAP's Import component
(javacard.framework -> Java Card level via the SDK-kit corpus, int flag)
and /api/cap-info exposes it; the CAP details show it as a Platform row
('Java Card >= 2.2.2 - CAP format 2.1 - int support').
A failed RAM install at a LOAD / INSTALL [for load] step now appends a
hint naming the import requirement and the smaller-block fallback
(ramInstallFailHint, pure): JC VM spec 4.5.2 makes every import a
'>= version' demand on the card's own packages checked while the load
file is verified - live 2026-09-29, a CAP requiring Java Card 2.2.2 was
rejected exactly at the block containing the end of Import (6438 at
240 B blocks, 6985 at 64 B), not at a step count.
sw cache simple-v309; tests: 507 Python / 670 Node.
The suggested quota row mixed a decimal C6 with hex C7/C8, so C6=27246
could be misread as hex (about 6x off). It now renders as one consistent
line via the pure capQuotaText(sug): decimal bytes with the hex in
parentheses (C6=27246 B (0x6A6E) . C7=270 B (0x010E) . C8=5143 B (0x1417)),
with a tooltip naming the tags (C6 = non-volatile code space / load file,
C7 = volatile RAM, C8 = non-volatile data).
The static "Notes" disclosure (NVRAM definition + "estimate only") is
removed from the CAP details box - the help (EN/RU, the Install Package
row) carries it now; only the dynamic scan warnings (e.g. unknown opcode)
stay visible, since they mean the estimate is partial.
Tests: the new formatting pinned, the removed notes asserted absent;
stylesheet rebuilt; 664 frontend / 504 Python green; version 3.6.33;
sw simple-v306.
The explorer's FF21 block was titled "Memory (GET DATA FF21)" although the
tag is the Extended Card Resources Information (GP tag FF21, TS 102 226
8.2.1.7.2: installed applications, free non-volatile and free volatile
memory), and the detected RAM command format line sat between the Free NV
and Free Volatile lines.
- Heading is now "Card resources (GET DATA FF21)" with a tooltip naming the
tag and its three fields (EN/RU).
- The "RAM command format:" line moved after the resource lines.
- Help EN/RU spells out what FF21 returns; test asserts the format line
follows the resource lines.
657 frontend / 504 Python green; version 3.6.27; sw simple-v300.
The E3 parsers existed since the vendor-trace work; what was missing was
issuing the query. Per GP 11.4.2.2 the compact listing format (P2.b2=0) is
deprecated and a card may reject it, while the expanded form (P2=02 + the
tag list 4F 9F70 C5 C4 CC CE EA) returns the richer registry data.
- ramExpandedQueryApdu(p1): the reference trace bytes
(80F2 <p1> 02 0C 4F005C084F9F70C5C4CCCEEA 00), pinned in a test.
- Explore: when the compact pass for a P1 yields nothing, the query is
retried in the expanded format and the result becomes the listing (the
compact error only surfaces if the retry also fails); the new "Query
expanded registry details (E3)" checkbox runs the expanded pass on top of
a working compact listing and merges the expanded-only fields
(privileges, ELF AID C4, SD AID CC, module lists) into the entries.
- The detected RAM command format (v3.6.24 ram_format) is now shown in the
Explore result + explorer view, the delete verdict and the plain-send
message.
- Tests parse the real trace payloads (NC ISD, ET application, NP ELF E3
templates); help EN/RU updated.
656 frontend / 504 Python green; version 3.6.25; sw simple-v298.
The plain "Send to Card" path refreshed the whole preset right before
sending (spRefreshFromPreset -> cardsApply -> cardsApplyFields) and
re-applied the preset's slot TAR - so a TAR typed for a push/link trigger,
an applet OTA message or the HTTP OTA admin params was silently replaced by
the preset's ISD TAR (the pack buttons for those sources deliberately leave
the TAR manual; the help even said so).
- spRefreshFromPreset(selId, keepTar): the plain send passes keepTar, so
the form's TAR survives; the counter, keys and SPI are still re-read.
- selecting a card preset, ramApplyCard and the chain packs still set the
TAR; the RAM operations keep the preset's ISD TAR by design.
- spParams()/getRamSpParams() normalise the TAR (strip/upper/pad to 6);
only the preview padded before, a short TAR went to the server raw.
- help EN/RU clarified, cards_counter/ram tests updated, sw simple-v294.
652 frontend / 499 Python green; version 3.6.21.
#phone-sub-esim was missing its closing </div> before #phone-sub-test, so
the browser parsed the test panel (and everything after) as a child of the
eSIM panel. Clicking Test script unhid the panel itself, but its hidden
ancestor kept it invisible - the pill has never shown a panel in a real
browser since it was added (v3.5.11). The eSIM LPA pill conversely showed
the whole test editor below its own fields.
The old whole-file div-count test stayed green because the inline script's
template strings happen to contain one extra </div>; the real markup was
409 opens vs 408 closes.
- add the missing </div>.
- html.test.js: count divs on the markup only (scripts excluded) and add a
structural walk (stray end tags, cross-nesting, unclosed elements, HTML
optional end tags honoured) over index.html, help.html and help-ru.html,
plus a Simulator-panel sibling-depth check. Run this for every HTML edit.
- the walk immediately found the same class of bug in both help pages: six
unclosed <section> chapters each; closed them.
- AGENTS: the HTML structure test is now part of the working conventions.
602 frontend / 482 Python green; version 3.6.1; sw simple-v274.
BIP was only reachable through the SCP81 listener; cards that use TCP for
other purposes (an applet's OPEN CHANNEL, a push trigger without HTTP OTA)
now get a generic control surface, independent of SCP81.
Server:
- /api/bip/control starts a plain BIP session in three modes: sink
(default; a local TcpDumpServer that accepts the card's channels and only
logs conn/sink-rx/conn-close, never answering; port 0 = ephemeral, the
bound port is reported), passthru (dial the OPEN CHANNEL destination, TCP
client only) and redirect (fixed host:port).
- /api/bip/status returns {owner, bip, listener}; /api/bip/log and
/api/bip/log-clear share the BIP event log with /api/scp81/log.
- The session state is shared with the SCP81 listener and only one session
runs at a time: _bip_session_stop() stops whichever control started it
and the control responses report it as `replaced` (both directions,
SCP81 <-> BIP). State renamed _SCP81_MODE/_TARGET/_LISTENER/_LINK_EVENTS
-> _BIP_* plus _BIP_OWNER.
- TcpDumpServer logs conn-close and counts accepted connections; stop()
joins the accept thread so the port is really free on restart.
- The new control endpoints are blocked during test-script runs.
PWA:
- New Simulator pill BIP (after TR Config): mode select with notes,
Host/Port rules, Start/Stop with a "replaced" notice, status line (mode,
bound address, owner, channels), a Channels box and the shared BIP log
(reuses the SCP81 log renderer, now showing `peer`).
- The SCP81 status line marks a session owned by the BIP pill.
Help EN/RU 8.10, docs/api.md, AGENTS; CAT_TP/UDP recorded as not
implemented.
Tests: tests/test_bip.py (9) and frontend/tests/bip.test.js (6).
600 frontend / 482 Python green; version 3.6.0; sw simple-v273.
The imported-library AIDs are now shown in a dedicated column between the
library name and the minimum version (Library | AID | Version | Family |
Refs), monospace and break-all so the 32-char UICC/3GPP AIDs wrap cleanly
on narrow panels. When a library name cannot be resolved (vendor AID)
the name cell shows a dash instead of repeating the AID now carried by
the column.
Tests updated: the Requires slice asserts the AID header and every row's
AID, and the unresolved-name case expects the dash plus the AID column.
Help EN/RU reworded; the AID key is a no-op in RU.
592 frontend / 473 Python green; version 3.5.18; sw simple-v271.
The CAP analysis box was a flat list mixing memory, package and library
data, with run-on "table-like" lines of differing lengths. Rebuild it as
a labelled report (always visible except the bulky parts, which stay in
nested disclosures):
- Package: AID (plus the optional JC 2.2 package_name), version, header
flags (applet/exports/int), applet AIDs and the compiled-against hint
(javacard.framework -> Java Card SDK release + CAP format).
- Requires (n): one row per imported library with the minimum version
(">=", same major and minor >= the recorded export version per JC VM
4.5.2), the API family and the distinct constant-pool reference count.
The AID is not repeated when the name resolves (redundant); unresolved
AIDs are shown as the name.
- Memory: the NVRAM requirement stated once, with indented children (code
image + persistent data parts), RAM (volatile) and the suggested
C6/C7/C8 quotas - the old duplicated totals are gone.
- Components: collapsed table in load-file order with size and share,
ending in the load-file total row; Notes holds the GP caveat and the
estimate disclaimer.
- Numbers line up right-aligned in monospace columns; section labels use
uppercase letter-spacing inline, so no Tailwind rebuild is needed.
- i18n: 27 new EN/RU keys; help EN/RU and AGENTS updated.
Frontend tests reworked for the new markup (group labels, aligned values,
load-file order, total row, and the no-imports / unknown-AID /
older-response / missing-components cases).
592 frontend / 473 Python green; version 3.5.17; sw simple-v270.
The Import component (JC VM spec 6.6) is now exposed by /api/cap-info and
rendered in the CAP analysis box:
- imports: the libraries the CAP is linked against with the export-file
versions and the number of distinct constant-pool references (6.7),
displayed as "name >= version" (a card resolves an import only with the
same major and a minor >= the recorded one, 4.5.2). Standard names come
from the AID table; each gets a family label (Oracle JavaCard / ETSI SIM
2G / ETSI UICC / 3GPP USIM-ISIM / GlobalPlatform) and, for
javacard.framework, a Java Card SDK release hint derived from the local
Oracle SDK kit corpus (jc211..jc305u4 exports; unknown versions stay
unhinted). Vendor/applet AIDs stay bare.
- Header package flags (Table 6-4: int / exports / applet package) and the
optional JC 2.2 package_name (absent in all CAP 2.1 files).
- components: every archive entry in load-file order with its size and
share of the load file (including the Directory/Export entries capmem
does not parse); the sizes sum to load_file_bytes.
- The PWA box leads with "Requires: ..." when imports exist, keeps the
compiled-against line (Java Card hint + CAP format), the package/applet
identity, the import details (family, refs, AID) and the component
breakdown in Details; a memory-only response still renders.
Tests: Python +2 (imports/flags/name/components; header flags + package
name) with the synthetic CAP builder extended; frontend +2 renderer cases
(unknown AIDs, no-import responses) plus jcAidNorm/jcAidFamily tests; the
jcAidNorm extraction added to the ram/scp81 harnesses.
Help EN/RU, docs/api.md, AGENTS.
591 frontend / 473 Python green; version 3.5.16; sw simple-v269.
GlobalPlatform models this explicitly (GP Card Spec v2.3.1 Table 11-48,
load parameters): C6 = non-volatile code, C7 = volatile data, C8 =
non-volatile data, and 11.5.2.3.7 - when the card makes no code/data
distinction the required minimum is C6 + C8. The analysis now reports it:
- capmem.memory_json() accepts the load file size (all CAP components -
the package image the card stores) and returns code.load_file,
nvram.requirement = load_file + persistent data, and sets the suggested
C6 to the load file (the bytecode-only Method.cap figure stays in
code.method_component); _cap_info_body passes the size it already
computed.
- The CAP estimate box (both the RAM installer and the SCP81
Install-from-.cap form) leads with "NVRAM requirement ≈ code image +
data" plus the RAM estimate, keeps the bytecode/other-component split and
the full data breakdown in Details, and carries the GP citation with the
caveats (card memory management, allocation rounding and the registry
entry are not included; the static field image appears in both parts).
- An older server response without code.load_file still renders (the
bytecode size is used as the fallback).
Tests: Python +1 (load-file semantics) with extended cap-info assertions,
frontend +1 (renderer + fallback). Help EN/RU, docs/api.md, AGENTS.
587 frontend / 472 Python green; version 3.5.15; sw simple-v268.
- Top-level tab label "Phone simulator" -> "Simulator" (RU "Симулятор");
the DOM ids stay tab-phone / phone-sub-*.
- The eSIM pill inside the Simulator tab is now "eSIM LPA" (EN/RU),
matching the section's ES10/LPA scope; the panel id stays phone-sub-esim.
- Documentation updated: help EN/RU (section 8 Simulator, list of the four
pills including Test script, tab lists and cross-references),
README/README_RUS (tab lists, Simulator section, eSIM LPA), AGENTS
repo/root.
- Test titles updated; version 3.5.12; sw cache simple-v265.
579 frontend / 467 Python green.
- Phone simulator tab: a fourth pill **Test script** - script list
(localStorage `simple_tests`) with New/Clone/Delete/Export/Import, a
form-based step editor (modal) and a run panel.
- Actions: ENVELOPE (Event Download), Menu Selection, UPDATE/READ file by
path, raw APDU, SCP80 (C-APDU or a pre-built packet, per-step TAR/SPI1/
SPI2 overrides; the preset is matched by the equipped card's ICCID and
the final counter is written back) and STATUS with an optional poll.
Every action has SW/data checks (exact or ?-mask) and a PoR check for
SCP80, with an error (stops) / warning (continues) fail level.
- Expectations: FETCH the command announced by the previous step, verify
type/qualifier/text/item/raw and answer with the scripted TERMINAL
RESPONSE (result, item id, text, extra TLVs); templates for STK menu
browsing and an applet via SCP80.
- Run panel: progress banner (plus a marker on the pill), per-step
OK/Warning/Error badges with expected vs actual values, sent/received
hex, decoded commands and the SCP80 counter; 500 ms polling while a run
is active, and a running script disables other card controls
(data-needs gate; the server answers 409 to other card endpoints).
- Help EN/RU (8.9 Test script), AGENTS; version 3.5.11; sw simple-v264.
579 frontend / 467 Python green.
- Background STATUS polling is enabled by default, per the spec's idle
polling rule (TS 102 221 14.6.2): `_POLL_ENABLED = True`, __main__ runs
`_poll_enable()` regardless of card presence (--poll-interval 0 still
disables) and `_do_status_poll` keeps ticking while enabled even without
a session, so a cardless start resumes as soon as a card appears.
- A new card session clears a POLLING OFF from the previous card in
`_apply_equipped_card` before re-enabling polling.
- The Phone-tab toggle now shows the *effective* state: OFF in amber
("card disabled polling (POLLING OFF)") while the card suspended
proactive polling, back to ON on the next POLL INTERVAL. The 5 s
background poll now passes `card_disabled` through (it was dropped, so
an autonomously received POLLING OFF never reached the UI).
- Tests: poll_ui updated (button OFF while suspended, warning path),
test_poll +2 (cardless ticking, module default via a subprocess check).
- Help EN/RU, docs/api.md, AGENTS; version 3.5.10; sw cache simple-v263.
573 frontend / 441 Python green.
- EVENT_NAMES (server + PWA) corrected against TS 102 223 v18.3.0 8.25:
0x14 is "Access technology change (multiple)" (not Change of UICC
Access), 0x19 Profile container, 0x1A Void, 0x1B Secured profile
container, 0x1C Poll interval negotiation, 0x20-0x22 reserved. Values
the CAT spec leaves "Reserved for 3GPP" now carry the concrete TS 31.111
event name + clause (0x11 (I-)WLAN access status, 0x12 Network
rejection, 0x15 CSG cell selection, 0x17 IMS registration, 0x18 Incoming
IMS data, 0x1D Data connection status change, 0x1E CAG cell selection,
0x1F Slices status change).
- Poll Interval Negotiation (0x1C) in the Phone tab: the form proposes a
Duration (unit + interval) and the UICC's answer (TS 102 223 8.97
accepted / rejected / modified + optional Duration) is decoded and
shown; a "modified" duration becomes the background poll interval. The
form appears when the card subscribed to the event, like every other.
- Polling emulation is card-driven: a POLL INTERVAL adopts its Duration
(minutes/seconds/tenths -> 1..255 s, logged) for the background poll,
is echoed in the TERMINAL RESPONSE (6.8.4) and clears a POLLING OFF
suspension; POLLING OFF (6.4.14) suspends proactive polling until a new
POLL INTERVAL - the manual Send STATUS button and presence detection are
unaffected. /api/poll-status and /api/poll-toggle report card_disabled
(+ a warning when enabling while suspended); the PWA shows it in amber.
- Tests: tests/test_poll.py +7, test_proactive_names.py +3, frontend
event_forms +2 and poll_ui (4). Help EN/RU, docs/api.md, AGENTS.
573 frontend / 439 Python green; version 3.5.9; sw cache simple-v262.
Selecting a .cap in the RAM installer or the SCP81 "Install from .cap"
template now runs a read-only analysis (POST /api/cap-info) before any
APDU is built: the archive is validated structurally (a corrupt or
wrong-format file fails here) and the bundled capmem analyzer estimates
the code size and the persistent (NVRAM) / volatile (RAM) requirements,
with the tool's suggested C6/C7/C8 quotas shown as information. The
form's action button (Execute / Generate) stays disabled until the
analysis succeeds - pressing it is the user's confirmation to continue.
- pysim_simple_server/capmem.py: bundled analyzer (component parsers +
JCVM opcode table + method-bytecode allocation scan), adapted to take
the CAP archive as bytes and return report/memory dicts; output
verified byte-identical to the workspace tool on 21 real CAPs.
- _cap_info_body + POST /api/cap-info (read-only; the install endpoints
stay unchanged and self-sufficient).
- PWA: shared capAnalyzeFile/capMemHtml/capGateOk helpers, estimate box
under both CAP inputs (reusing the idle #ram-cap-info div, new
#scripts-cap-info), data-cap-gate gating in pysimApplyAvailability,
stale-response guard, Retry, EN/RU strings.
- Tests: tests/test_cap_memory.py (synthetic CAPs: new/newarray/
makeTransientByteArray/static fields/unknown-opcode warnings/corrupt
input), frontend capmem.test.js (renderer, gate, analyze flow).
- help EN/RU, docs/api.md, AGENTS; version 3.5.8; sw cache simple-v261.
567 frontend / 429 Python green.
The RAM Explore view, the SCP81 GET STATUS script results and the R-APDU
parser tree showed package AIDs as bare hex. A shared resolver now
annotates the known standard JavaCard / ETSI / 3GPP / GlobalPlatform
package AIDs with their library name (workspace export-file study
`docs/JAVACARD.md`, 2026-09-26, plus the GP default ISD AID from GP Card
Spec v2.3.1 H.1.3); a RID table gives a weak owner hint for otherwise
unknown AIDs, and vendor/applet AIDs stay bare.
- JC_AID_NAMES / JC_AID_RIDS + jcAidName / jcAidSuffix / jcAidHtml.
- Wired into ramRenderExploreHtml (ISD, applications, ELFs, module and SD
AIDs), scp81ResultLines GET STATUS listings and decodeTlvValue
(4F/84/C4/CC - the R-APDU parser tree).
- aid_names.test.js (families, normalisation, RID hints, malformed input,
table sanity) plus render assertions in ram.test.js and scp81.test.js.
- Help EN/RU note the annotation; table is hand-maintained from the note.
561 frontend / 421 Python green; version 3.5.7; sw cache simple-v260.
Code-review follow-ups for v3.5.2/v3.5.1, plus a test flake found while
re-running the suites:
- F1: a half-initialized equip is no longer reported as success. cmd2
swallows exceptions raised inside the equip command (and prints no
traceback by default), while PysimApp.equip() assigns card/rs before it
registers the command sets - so app.card alone once let the "CommandSet ...
is already installed" abort pass as done while /api/tree stayed broken.
The auto-equip attempt now captures the output with cmd2 debug on (a
swallowed error prints a traceback), requires the new profile's command-set
instances to be installed (_app_equip_complete), and the manual
/api/command equip branch applies the post-equip refresh only when that
check passes (and reports it in the output when it does not).
- F3: SCARD_E_SHARING_VIOLATION is recoverable (a rebuild cannot free another
process's claim) instead of transport-fatal.
- F4: SPI1 b2b1 = 11 (Digital Signature) is refused instead of building an
unsigned packet; help notes RC is CRC-32 only (KID CRC-16 not offered).
- F5: _clear_app_card_state removes the muted stdout again when the app object
had no stdout attribute.
- F7: the watchdog re-arm keeps its rate-limit window when the trigger is
busy/disabled instead of consuming it.
- F2: stale docstring in _auto_equip_attempt.
- tests: equip-state units, half-equip and captured-traceback failures,
unequip-on-failure, busy trigger, sharing violation, DS refusal.
- bonus: the MCC/MNC random-pick test could fail because a dict keyed by
(mcc, mnc) keeps one of two entries (the bundled list carries both a real
and an MVNO entry for 234/18 and 234/28); the picker was correct - the
assertion now checks the pair against the non-MVNO pairs.
549 frontend / 421 Python green; version 3.5.4; sw cache simple-v256.
SET UP MENU / SELECT ITEM items carry an optional Items Next Action Indicator
(TS 102 223 8.24, tag '18'): one byte per item, in list order, coded with the
Table 9.4 values marked "Used for Next Action Indicator". The decoder ignored
it, so neither the proactive log nor the STK menu showed what the card would
do when an item is selected.
- server: NAI_TYPES whitelist (the ToC-only values - e.g. '26', '27', '47' -
are reserved there and are ignored, as are '00' and unlisted values),
_nai_name(), _attach_nai() (a short NAI list leaves the tail without an
indicator, extra bytes are ignored); _parse_select_item() and
_parse_setup_menu_items() plus the TERMINAL PROFILE SET UP MENU walk attach
nai/nai_name to the items; _decode_cmd() renders '1. Menu -> SET UP MENU'.
- PWA: stkMenuNaiSuffix() adds a small gray '<name>' suffix to STK menu items
that carry an NAI; the proactive log picks the decode up via cmd_decoded.
- tests: SET UP MENU / SELECT ITEM vectors with NAIs, a reserved value that is
ignored, a short NAI list, and the stkMenuNaiSuffix unit test.
- docs: UICC_SPECS 6.5 gained the '18' Items next action indicator row
(8.24/9.4); help EN/RU mention the menu suffix; AGENTS files updated.
548 frontend / 413 Python green; version 3.5.3; sw cache simple-v255.
Three fixes found while filling the ETSI/3GPP registry gaps against the
SIMalliance Stepping Stones R7:
- SCP80 builder/verification parity (TS 31.115 Table 1 NOTE / 4.2 / 4.3):
the CPL is now transmitted whenever the packet is ciphered or carries
RC/CC/DS - it is part of their input - and whenever the packet needs SMS
concatenation; a single unprotected SM keeps pySim's CHL-first form.
Before, the JS dropped the CPL for every unciphered packet while the
server reference re-added it, so "Verify vs pySim" reported a false
MISMATCH for every unciphered RC/CC packet (SPI1 01/02/0A/12/1A...).
All ten offered SPI1 values now match the server reference byte-for-byte.
- RC (SPI1 b2b1 = 01) was offered but not built: the JS now computes CRC-32
(TS 102 225 5.1.3.2, pySim zlib.crc32 parity) over the same CPL frame as
the CC; the packet no longer silently omits the 4-byte RC field.
- Server: _build_secured_packet/_ota_reference add the CPL to a concatenated
unprotected packet too (Table 1 NOTE / 4.3).
- fcpLifeCycle: unlisted values with b8 clear are RFU, b8 set is proprietary
(Table 11.7b); previously all unmatched values were labelled proprietary.
- EF.ARR decoder now decodes the expanded format (AM_DO/SC_DO per ISO 7816-4
5.4.3.2 + TS 102 221 9.2.7): operation bit masks, INCREASE/RESIZE AM_DO
0x84, OR/AND/NOT templates, PIN key references with usage qualifiers.
- FCP 'C6' PS template DO decoded (PS_DO bitmap + key references + usage
qualifiers, TS 102 221 11.1.1.4.10/9.5.2) with a shared key-reference map.
Tests: sp.test.js (CPL/RC vectors + crc32 known answer), ef_decode.test.js
(expanded-format ARR vectors), profiler.test.js (LCSI RFU/proprietary, C6),
test_ota_helpers.py (RC reference, unprotected single-SM vs concatenated).
Help EN/RU and READMEs: CPL size 2 (SMS), RC/CC/DS 4-8, RC bullet, CPL rule.
547 frontend / 397 Python green; version 3.5.1; sw cache simple-v253.
- README/RUS: the Remote APDU tab has six sub-tabs, not seven; the GP
connection-parameter table listed the wrong TLV tags (02/80/01) - it now
matches the UI presets (82 Device Identities, 05 Alpha, 81 Command details,
35 Bearer, 03 = default bearer). The Push commands intro names the
mode-specific rows (SD params tag in Store, Command Scripting template in
Trigger) and the RU text uses the RU sub-pill labels; both READMEs gain the
PoR advice bullet (Stepping Stones R7 18.6.3: no PoR on success, on failure
SMS-SUBMIT + SPI2 0x20).
- help RU: the C-APDU parser section names the Parser pill sub-pills like the
EN one; the Push commands intro describes what the mode actually switches
and uses the RU sub-pill labels.
- sw cache -> simple-v252 (help pages are precached).
Docs only; no functional change, version stays 3.5.0.
The 01 (BIP channel opening) variant was raw hex while 03 (TCP) had a detailed
form. The asymmetry is real - 01 accepts any OPEN CHANNEL COMPREHENSION-TLVs
(TS 102 226 9.2.1) while 03's set is fixed by 9.2.3 - so 01 now offers a
Fields/Hex switch instead of a rigid form:
- Fields (default) composes the most-used OPEN CHANNEL parameters per
SIMalliance Stepping Stones R7 18.6.1: bearer description (default 35 01 03),
transport protocol (UDP 01 / TCP 02, UICC client, remote - the only values
TS 102 223 6.6.27.4 allows when the transport level is present) with the
destination port, destination address, NAA/APN, buffer size, alpha
(transparent checkbox -> 05 00 = no user confirmation) and an extra-TLVs
field for login/password and anything else. The local address is never
emitted (9.2.1 and the guide forbid it).
- Hex keeps the raw COMPREHENSION-TLVs field; pushOpenChannelTlvs() is a pure,
vector-tested composer feeding the same encoder as before.
Help 2.7 EN/RU and the READMEs explain the two modes; sw cache ->
simple-v251; version stays 3.5.0.
- The first two Push commands sub-pills carry the HTTP OTA prefix
("HTTP OTA Trigger (Push SMS)", "HTTP OTA Store (SD admin params)"), so the
form headings drop it and read "Administrative session trigger (Push SMS)"
/ "Administrative session store data (SD admin params)".
- BIP channel opening (01) gains the same-message CAT_TP follow-up: an "Also
request the CAT_TP link establishment (02) in the same message" checkbox
with the shared CAT_TP fields (destination port mandatory, optional max SDU
/ identification data / extra TLVs). The preview and Pack then carry the
pair 80EC0101...80EC0102... as one command script (concatenated SMS when
over 140 octets) and -> Expanded Script appends both 22 Command TLVs.
Rationale (SIMalliance Stepping Stones R7 18.6): 01 carries the channel
parameters, 02 only the CAT_TP port, and the guide recommends both in the
same SMS; standalone 02 stays for cards with provisioned defaults.
- Help 2.7 EN/RU, READMEs and AGENTS document the pairing, the fact that 03 is
self-contained (it carries the mandatory OPEN CHANNEL TCP set, so no
companion 01) and the Stepping Stones PoR advice (no PoR on success; on
failure use SMS-SUBMIT / SPI2 0x20).
- pushSectionApdus vectors cover the 01+02 pair and its mandatory port;
sw cache -> simple-v250.
The Push commands pill now has three sub-pills: Trigger (Push SMS), Store
(SD admin params) and Channel / link trigger, which builds all three TS 102 226
§9 establishment requests - 01 BIP channel opening (OPEN CHANNEL), 02 CAT_TP
link, 03 TCP connection - with one shared destination-port field and
per-request field visibility. The TCP parameters are the OPEN CHANNEL TCP
set (BIP, or a direct IP connection per TS 102 483 where supported), so 03
belongs with the other channel/link requests.
The identification packet (04) is not a trigger: it presupposes an already
open TCP channel and only makes sense as a follow-up in the same message, so
it is no longer a standalone request. The TCP request carries an "Also send
the identification packet (04) in the same message" checkbox (optional data,
ICCID when empty): the preview then shows both commands (a command string sent
in one secured packet) and → Expanded Script appends one 22 Command TLV per
command. pushSectionApdus() returns the APDU list; 04 stays available in the
RAM/GP chain's PUSH row for script sequences.
Help 2.7 EN/RU, READMEs and AGENTS describe the three sub-pills and the BIP vs
direct-IP nuance; sw cache -> simple-v249; version stays 3.5.0.
html.test.js also asserts that the document is complete (ends with </html>,
every <script> closed, the inline script parses and defines cApduSwitchSubtab):
a truncated index.html made the browser fail to parse the inline script, so
every onclick handler reported "function is not defined" while the Node tests
still passed.
Remote APDU now has six top-level pills (SIM RFM, USIM RFM, RAM/GP,
Expanded Script, Push commands, Parser); the C-APDU and R-APDU parsers are
nested panels behind the Parser pill, switched by parserSwitchSubtab().
- "Response parser" renamed to "R-APDU parser" (RU: «Разбор R-APDU»), the
umbrella is "Parser" / «Разбор»; the C-APDU panel keeps its id and label.
- cApduSwitchSubtab() routes nested names through the Parser pill first, so
pysimSendOta()'s post-send jump keeps working; the help deep-link anchor
follows the selected parser (c-apdu-parser / response-parser) and the Push
commands pill now links to the renamed #push-commands section.
- The small C-APDU panel moved next to the R-APDU panel so both live in the
#c-apdu-sub-parser container; html.test.js checks the nesting and sub-pills.
- Pill lists updated in help EN/RU (2.6 note, 2.8 heading), READMEs, AGENTS;
sw cache -> simple-v248.
The Push commands pill now switches between four sub-pills - Trigger (Push
SMS), Store (SD admin params), BIP / CAT_TP trigger, TCP trigger - and shows
only the selected form:
- Trigger/Store share one GP administration form (fields unchanged); the mode
only changes the payload wrapping and the form heading, which now carries
the HTTP OTA prefix: "HTTP OTA Administrative session trigger (Push SMS)"
/ "HTTP OTA Administrative session store data (SD admin params)".
- BIP/CAT_TP and TCP keep their own headings ("... (TS 102 226 §9)") and
their "not the administration session" note.
- hotaSetForm() owns the pill styling and form visibility and delegates to
hotaSetMode() (Trigger/Store) or pushUpdate() (SS9 forms); the view always
opens on Trigger, nothing is persisted.
sw cache -> simple-v247; help 2.7 EN/RU, READMEs and AGENTS updated.
The former HTTP OTA pill becomes "Push commands" (RU: Пуш/триггер) and groups
everything that makes the card dial out:
- Administrative session (GP Amd B §4.7): the existing Trigger/Store UI,
unchanged, as the first section (most used).
- BIP / CAT_TP trigger (§9): request 01 BIP channel opening (optional OPEN
CHANNEL COMPREHENSION-TLVs) or 02 CAT_TP link (destination port, optional
max SDU / identification data).
- TCP trigger (§9): request 03 TCP connection (bearer, transport level with
protocol type 02, destination address 21/57/F0, NAA/APN, extra TLVs) or
04 identification packet (optional data, ICCID when absent — sent over an
already open channel).
The guided sections reuse chainPushData (the RAM/GP chain PUSH encoder) and
preview the C-APDU; mandatory parameters (02 port, 03 port + address) are
enforced there while the chain row stays lenient. Actions: Pack into Secured
packet (no auto-TAR — a §9 PUSH goes to the target application) and
→ Expanded Script (22 Command TLV import; berAppendApdu extracted from
loadExpandedScript). Each §9 request has a note separating it from the
administration session. Chain-builder PUSH command and the expanded-script
C-APDU picker are unchanged.
Tests: pushSectionApdu vectors in ts102226.test.js; help 2.7 EN/RU
restructured, READMEs, AGENTS; sw cache -> simple-v246.
Swap the two pills in the Remote APDU view (SIM RFM, USIM RFM, RAM/GP,
Expanded Script, HTTP OTA, C-APDU Parser, Response parser) and keep the
subtab-toggling name list in the same order. Pill order updated in help
EN/RU, READMEs and AGENTS; sw cache -> simple-v245; version stays 3.4.0.
The file picker's implicit current DF now defaults to MF for SIM RFM and
USIM RFM alike (the real context follows the TAR the packet is sent to,
TS 102 226 7.2/7.3, so the default is neutral and the per-row "starts in"
selector covers ADF sessions - ADF.USIM files appear once it is switched).
Tests set the ADF session explicitly where they exercise ADF-relative fills
plus a new default assertion; help 2.1 EN/RU, READMEs and AGENTS updated.
sw cache -> simple-v244; version stays 3.4.0.
The SELECT rows (compact RFM chains and the Expanded Script C-APDU picker,
which shares the row editor) now have a file picker instead of typing FIDs,
paths or chains by hand.
Data:
- `pysim_simple_server/uicc_files.py` builds the standard file list cardless
from pySim's profiles and application classes (CardProfileUICC + CardProfileSIM
for the MF tree, every concrete CardApplication subclass for the ADFs) and
writes `frontend/uicc_files.json` (490 entries: canonical FID path, symbolic
name, fid, kind, root, ADF AID). `tests/test_uicc_files.py` regenerates it
and fails when pySim adds or renames files. The asset is precached by the
service worker, so the builders keep working offline.
Picker:
- Sources merged per canonical path: the loaded file-manager tree (card names
and probed presence; probed-absent files hidden), custom files, and the
shipped standard list (specs-default until "Probe all files" has run).
- Default list shows what the current method can express; "all files" reveals
the rest, and picking one auto-switches the method - preferring path (one
SELECT) over chain - with a note line explaining the switch. A "starts in"
selector sets the implicit current DF (UICC shared-FS RFM app starts in MF,
an ADF RFM app in its ADF, TS 102 226 7.2/7.3 - the TAR decides; default per
builder, overridable per row).
- Fill rules: by FID only for direct children of the current DF; path = FID
sequence from MF without the MF identifier (ISO 7816-4) or the relative tail
(USIM P1=09); chain stays relative and follows the TS 102 221 11.1.1.2 FID
search order (children, parent, siblings), so no hop to the common ancestor.
ADF roots are not pickable (selection is by AID; TS 102 226 7.1 forbids
P1=04 for RFM) - the By AID method stays manual.
Tests/docs: frontend/tests/uicc_files.test.js (asset shape, merge/priority/
exclusion, fill matrix, relative chains, session-context tracking, option
grouping); help 2.1/2.2 EN+RU, READMEs, AGENTS. sw cache -> simple-v242.
Phase 1 — the Expanded Script C-APDU rows are no longer hex-only:
- chain containers gained a kind (chainKind/chainIsEmbedded/chainCommands),
so the SIM RFM / USIM RFM / RAM-GP row editors and hex builders can be
embedded as one-row "virtual" chains (ber-<kind>-<uid>) with a listener
hook (chainListen/chainNotify) refreshing the owning row.
- the C-APDU row offers Hex / SIM RFM / USIM RFM / RAM-GP; the built APDU is
echoed next to the picker and wrapped in the 22 Command TLV. GET RESPONSE
is not offered in the embedded pickers (TS 102 226 5.2.1.1).
Phase 2 — "→ Expanded Script" in the SIM RFM / USIM RFM / RAM-GP views
imports the built chain as C-APDU rows (chainApduList drops GET RESPONSE
and splits multi-APDU FID-chain selects; the RAM "To expanded" preview
stays).
Phase 3 — the TS 102 226 table 7.1/8.1/9.1 gaps:
- RFM: SEARCH RECORD (TS 102 221 11.1.7 / SEEK per TS 151 011 9.2.7),
INCREASE (11.1.8 / TS 151 011 9.2.8), CREATE FILE / DELETE FILE /
RESIZE FILE (TS 102 222 6.3/6.4/6.10, with an FCP skeleton builder and
CLA 80 for RESIZE), SET DATA / RETRIEVE DATA (11.3, block + SFI coding);
- RAM: PUT KEY (GP Card Spec 11.8) and the TS 102 226 §9 PUSH command
(80 EC 01 P2) with BIP opening (optional OPEN CHANNEL TLVs), CAT_TP
(3C/39/36), TCP (35/3C/3E/47) and identification-packet variants.
Tests: new frontend/tests/ts102226.test.js (byte-exact spec vectors for
every new command, the FCP skeletons, chainApduList) plus C-APDU row tests
in ber.test.js; 530 frontend / 390 Python green. Help EN/RU, README/RUS
and AGENTS document the Command TLV taxonomy (Tables 5.5/5.9 limits), the
picker and the new commands.
Packets longer than one SMS now go out as concatenated SMS-PP downloads
per TS 31.115 4.3 and the UI shows how many SMS a packet needs.
Server:
- `_split_secured_packet` cuts the command packet at the exact SMS
user-data capacities (first SM 132 octets: concat IE 5 + CPI IE 2;
following ones 134; a single-SM packet may be 137 with the CPI IE) and
`_build_sms_tpdu` tags every segment with the fixed concatenation
reference 01; `_build_sms_tpdu` also enforces the 140-octet budget.
- `_send_secured_packet` (shared by /api/send-ota and /api/ram-install)
sends one ENVELOPE per segment in order, refuses more than
MAX_ENVELOPE_SEGMENTS (5, the card's concatenation buffer) and reports
`bytes`/`segments` in the response (RAM install per step as well).
- `_build_secured_packet`/`_encode_cmd_unlimited`: our own TS 102 225
5.1.1 encoder on pySim's keyset/header constructors, byte-identical to
pySim for packets <= 140 octets (tests) and not limited to one SMS
(pySim refuses the longer ones, which is why they never went out).
- RAM LOAD blocks are no longer clamped to one SMS: 1-240 bytes of
payload with the default 240 (the GP maximum); `load_block_size_auto`
replaces `load_block_size_clamped`.
PWA:
- `scp80SegmentInfo` / `spSizeInfoText` show "N bytes . M SMS
(concatenated)" under the packet field, turn red past 5 SMS and report
size/SMS in the send result and the RAM step log; LOAD block hints and
placeholders updated; EN/RU.
Tests/docs: Python +2 cases incl. segment order/capacities and byte
identity with pySim; Node drift guard against the server constants and
UI text tests; README/README_RUS, help EN/RU, docs/api.md, AGENTS.
A profile check comparing an empty PNN record against a populated one
showed a cryptic 'Empty: yes' row: the decoders return {empty: true} for
an all-FF record and efFlatten() rendered that marker as a pseudo-field
('empty' prettified to 'Empty', the boolean as 'yes').
- efFlatten() skips the marker (the decoded views already show their own
translated 'empty' note next to the record).
- efDiffData() fills the cells of a side that decodes to an all-FF record
with 'Empty (all FF)' (RU: 'Пусто (только FF)') instead of leaving them
blank; a field merely missing from a non-empty record stays blank.
- tests: efFlatten marker, one-sided and both-sided empty diffs, and the
PNN case from the report; help EN/RU note the new text.
- sw.js simple-v239.
'Explore' and 'Delete' were ambiguous next to the other SCP81 actions.
- template selector: Explore -> Explore ISD, Delete -> Delete AID (EN/RU);
- a new Explore script is named 'Explore ISD'; the Delete template keeps
its count-based name (e.g. 'Delete 2 AIDs');
- new scriptKindLabel() maps the stored kinds (unchanged:
explore/delete/install/empty, so existing localStorage scripts keep
working) to those labels and is now used for the scripts table kind
column, which used to print the raw lowercase kind untranslated;
- docs: help EN/RU, README/RUS, docs/api.md examples, AGENTS;
- sw.js simple-v238.
Streams every APDU the server sends or receives as GSMTAP-SIM UDP packets,
so a live capture can be followed in Wireshark or the SIMtrace Analyser
without a hardware sniffer. CLI-only: --gsmtap [HOST[:PORT]], default
target 127.0.0.1:4729; no UI or API.
- pysim_simple_server/gsmtap.py: 16-byte big-endian GSMTAP-SIM header
(type 0x04, sub_type 0x00 = APDU / 0x01 = ATR) + raw APDU bytes, a
fire-and-forget non-blocking sender that never raises into card I/O, an
ApduTracer (a response is sent as data + SW1SW2, the wire form) and a
fan-out tracer. The packet layout is byte-identical to
sigrok-iso7816-stream / simtrace2-sniff (verified against the sigrok
module) and is what the analyser's GSMTAP receiver expects.
- __main__.py: --gsmtap option, tracer installed on the shared transport
before the first APDU, combined with --apdu-trace via the fan-out and
re-attached across equips (pySim nulls the tracer on every equip); one
ATR packet per equip from _apply_equipped_card/_send_gsmtap_atr.
- start.sh/start.bat: forward their extra arguments to the server, so
./start.sh --gsmtap works.
- tests: packet layout, loopback UDP delivery, tracer mapping, target
parsing, fan-out; docs (READMEs, help EN/RU, AGENTS); version 3.1.0,
sw.js simple-v235.
The card title showed only the nickname or profile name ('0002'); with
the provider in front it reads 'Alfa 0002' and still prefers a user
nickname ('Alfa Work') when one is set.
- esimProfileTitle(): provider + (nickname || name), falling back to the
ICCID and finally '?'.
- tests for the helper; help EN/RU and sw.js simple-v234.
The short EUICCInfo2 fields (versions, card resources, category, PPRs, …)
were one per row in the wide right-hand box, wasting half of it.
- esimChipValueWide(): a row needs the full width when its value is a
list or a long token (>24 chars or ', '), so short scalars pair up.
- esimChipBox() gained a twoColumns mode: rows in a responsive
grid-cols-1 sm:grid-cols-2 grid with long values spanning both columns;
the other boxes keep their single-column rows.
- esimRenderChip() renders the EUICCInfo2 box with two columns.
- style.css rebuilt (sm:grid-cols-2, sm:col-span-2).
- tests: the wide/short rule, the two-column markup and the render call;
help EN/RU and AGENTS note the layout; sw.js simple-v233.
The chip view was one long flat list spread over the full height.
- esimRenderChip split into esimChipSectionRows (object or RAT rule list
-> rows) and esimChipBox (titled box, skipped when empty); the boxes
are laid out on a grid: EID, EUICCInfo1, Addresses and the rules
authorisation table in the left column, the larger EUICCInfo2 in the
wider right-hand box (single column on narrow screens). Rows use a
narrower label column (w-36).
- Values wrap with break-words + min-w-0 instead of break-all: text
breaks at spaces first and long hex/AID tokens only when they cannot
fit (same for the profile metadata rows).
- style.css rebuilt (grid-cols-1, lg:grid-cols-3, lg:col-span-1/2/3,
break-words).
- tests: the new helpers, the grid/box layout and the wrapping check;
help EN/RU note the grouping; sw.js simple-v232.
pySim already requests the Icon tag (0x94) together with the other
ProfileInfo tags; the mapping dropped it, so the PWA only had the icon
type.
- esim.profiles(): each profile now carries `icon` (the image bytes as
hex) and `icon_size` (byte count), null when the card sent no image.
- PWA: esimIconDataUrl() builds a data: URL (png/jpg -> image/png|jpeg)
and the profile card shows the image unscaled to the left of the
metadata rows; the Icon row keeps the type and adds the data size
(e.g. 'png · 1234 B').
- tests: profiles icon/icon_size mapping (+ the absent case) and the
frontend data URL / row / render checks; docs and sw simple-v231.
catarrh