The SIM/UICC Toolkit parameters grid is grid-cols-3 now: the 12 narrow
fields (priority, timers, text length, menus, first pos/id, last pos/id,
channels, MSL, TAR, access domain) fit in four clean rows, Max services
keeps its own row (it was a lone half-row in the 2-column layout) and the
file-access group is one col-span-3 row: File system access (full) ·
ADF.USIM access (full) · ADF AID (hex) + From card.
The ADF AID cell is its own rc-tk-adfaid-row; the whole group is wrapped
in rc-tk-access-row, which updateRcTkMode hides in SIM/CA mode (hiding
only the old checkbox rows would leave the AID field behind).
grid-cols-3/col-span-3 were already compiled (no Tailwind rebuild); the
html test pins the 3-column grid and the spanning access row with its
three cells, the JS guard pins the CA/EA visibility.
sw cache simple-v323; tests: 540 Python / 689 Node.
Review of v3.6.48 found six issues; the two that matter in use:
- ramProbeParse('') errored, so the basic 'is this CAP compatible with
this card at all?' run (no overrides) was refused by an alert. An empty
list is valid now: the test runs with the CAP's own versions.
- ramCompatVerdict said 'Import list rejected' for every failure. It now
distinguishes: a request error (no steps), a failed format probe (the
card not answering), an INSTALL [for load] refusal, and only then the
import list - each with its own headline.
Plus:
- the result line shows the applied probe (ramCompatProbeNote: 'probe:
7 imports -> 0.0 · +1 appended', unmatched AIDs included);
- #ram-compat-block validates 1..240 like the install's block size;
- the server reports probe_unmatched (override AIDs matching no entry,
previously silent when another override matched) and logs them;
- tests: the endpoint's probe-400 path (a mini CAP + a dummy scc),
_cap_import_aids, the verdict cases and the probe note.
sw cache simple-v322; tests: 540 Python / 687 Node.
The import probe no longer lives in 'Install Package (.cap file)': a
diagnostic that can leave a LOADED-only package does not belong in the
operation meant to produce a working applet. /api/ram-install no longer
takes probe_imports; the install form's probe fieldset is gone.
New RAM operation CAP compatibility test (POST /api/cap-compat): the
server runs the format check, INSTALL [for load] and the LOAD blocks only
up to the block that completes the Import component (_cap_import_end +
_cap_compat_blocks, computed from the load file and the C4 TLV framing),
then stops - no last-block flag, no INSTALL [for install], so nothing is
committed and nothing needs deleting. The verdict (imports_ok,
boundary_block/total_blocks) states it covers the LOAD/import gate only;
the link gate stays the real install's business. Verified on the real
RemMobileID CAP: the boundary is LOAD 1/64, 2/128, 3/240 for 240/120/64 B
blocks - exactly the blocks where the live cards rejected the load.
_probe_import_versions(load_file, overrides, additions) now supports
append-only synthetic imports: +AID=version appends a new entry, the
Import component's size field and the Directory's Import size are patched,
and existing entries keep their positions (constant-pool import indices
stay valid); an AID that is already imported becomes a version override.
This is the card-capability query ('does this card export package X at
>= Y?') without building a probe applet.
PWA: new op section (CAP file + analysis + the version list + block size),
ramCompatTest with inline results and ramCompatVerdict, ramProbeParse
understands +AID=version; help EN/RU documents the operation, the two-step
bisect and the gate scope.
sw cache simple-v321; tests: 538 Python / 686 Node.
The install modal's progress bar froze around 70% and jumped to 100% at
the end: not a math bug - the UI's other polls (/api/stk-status,
/api/poll-status, /api/proactive-log, /api/menu, ...) were card-locked in
do_GET even though they only read cached state, queued behind the install
and exhausted the browser's 6-connections-per-host budget, starving
/api/status. _CARD_FREE_GET lists every card-free GET (status, version,
stk-status, poll-status, proactive-log, menu, events, terminal-profile,
pli-*, commands, net-state, mcc-mnc, scp81/bip status|script|log);
/api/cardinfo and /api/esim/* stay locked (they touch the card).
tests/test_fetch_routes.py holds _CARD_LOCK and asserts the cached
endpoints still answer - verified to time out on the pre-fix list.
The install modal is wider (max-w-3xl) and successful step lines are
compact: '✅ Step 3: LOAD (1/240) - 6101 · 274 B / 3 SMS' (no verbose SW
name, B instead of bytes, the SMS count only when >1); failed steps keep
the full detail and the hint.
sw cache simple-v320; tests: 533 Python / 684 Node.
The max-w-7xl mx-auto page container closed before #tab-scp81, so SCP81
and Cards rendered directly under <body> and stretched to the whole window
while the other five tabs were capped at 1280 px. The closing </div> moved
after #tab-cards (before the modals); a structural test walks the markup
and asserts every tab-content has the container as an ancestor (verified to
fail on the old nesting with 'tab-scp81 must be inside the max-w-7xl page
container').
The SCP80/RAM form's Card preset and Operation selects now share one
flex gap-2 items-end row with Execute (guarded by a markup test).
sw cache simple-v319; tests: 531 Python / 683 Node.
- Explore runs inline: no blocking modal (that stays for the install
operations, which can leave a half-loaded package; Explore leaves the
card consistent). A test guards that ramExplore never calls the modal.
- Minimal success line: just OK - the details live in the explorer below;
error runs keep the detailed 'Partial - ...' line.
- Counts moved into the section headings (Applications / Applet Instances
(n), Executable Load Files (ELFs) / Packages (n)); the redundant '1 ISD'
count is gone (P1=80 returns the ISD as a single occurrence, GP
11.4.2.1).
- The RAM command format line gained a tooltip: compact = TS 102 226
5.2.1 command string, expanded = the AA/22 scripting template (5.2.1.0),
detected per operation with a read-only GET STATUS probe.
- The expanded-registry checkbox is relabelled 'Fetch expanded registry
details (load-file / SD associations)' with a tooltip (extra secured
packets, card support varies, the fallback is automatic) and is now a
sticky per-browser preference (simple_ram_expanded).
sw cache simple-v318; tests: 531 Python / 681 Node.
The CAP details' Platform row named only the Java Card level; it now also
shows the ETSI/3GPP release the UICC API imports come from, with its basis
in brackets, e.g. 'Java Card >= 2.2.2 - ETSI REL-7 (uicc.toolkit 1.4) -
CAP format 2.1'.
capmem.ETSI_TOOLKIT_RELEASE maps the uicc.toolkit export version to the
release, sourced from the workspace corpus: sim-tools/ETSI-REL.md for the
prepared trees (api21_rel7_export_files carries uicc.toolkit 1.4 = the
REL-7 jar, api21_export_files 1.11 = the REL-12 jar) and
sim-tools/etsi/102241/README.md's package-version table for the rest
(1.0 -> REL-6/7, 1.3 -> REL-8, 1.5 -> REL-9, 1.12-1.14 -> REL-15..18; the
1.11 spec range is 13.01-14.02 but the tree the builds use is REL-12).
Exposed as requires_etsi_release/requires_etsi_basis in /api/cap-info and
the CLI; SIM-only CAPs (no uicc.toolkit) get no label.
Verified: RemMobileID -> REL-7 (uicc.toolkit 1.4), AlfaDSA -> REL-12
(uicc.toolkit 1.11). sw cache simple-v317; tests: 531 Python / 677 Node.
The probe's checkbox described the mechanism ('Rewrite the CAP's import
versions before the load'); it now reads 'Enable import probe' (purpose
first) with the mechanism in a tooltip, and the field carries two short
hint lines: what the card checks while loading, and the workflow (Set all
0.0 first; if the LOAD passes the list was the cause, then restore one
line at a time to find the package/version the card lacks).
Static tooltips are translatable now via data-l10n-title (handled by
translatePage, checked against LANG_RU by html.test.js together with
data-l10n); the help's RAM-install section documents the two-step
workflow (EN/RU).
sw cache simple-v316; tests: 530 Python / 676 Node.
Cards that cannot satisfy the CAP's import list reject the LOAD as soon
as the Import component is complete (live 2026-09-29: 6438/6985 in the
block containing its last byte, on several cards incl. an eUICC profile
whose ISD is not the default AID and which does not answer GET DATA 0066 -
no direct platform-version readout exists).
_probe_import_versions (pure) rewrites the Import component's two version
bytes per entry in the assembled load file: same length, component sizes,
Directory and offsets untouched; unknown AIDs and bad versions are
rejected. /api/ram-install takes probe_imports ({'all': '0.0'} or
per-AID), echoes the applied changes in the response and logs them. The
PWA's RAM install form gains a collapsed Import probe fieldset (checkbox,
AID=version lines prefilled from the CAP analysis, 'Set all 0.0') and the
result line reports the applied changes. Diagnostic only - never used for
a real install.
Also verified _cap_parse's component order against the reference TCA load
trace (Header, Directory, Import, Applet, Class, Method, StaticField,
ConstantPool, RefLocation, Descriptor - Import before Applet, not
ascending tag order), so the order is correct and the import list remains
the prime suspect.
sw cache simple-v315; tests: 530 Python / 676 Node.
pysimFetch() sends POST whenever a body is passed, but /api/test/run,
/api/test/stop and /api/test/clear were registered in _do_GET (since the
phase-1 commit 3a4a098): every Start fell through to the catch-all
404 {'error': 'Not found'} and the feature had never been exercised over
HTTP (a browser GET would not carry the JSON body either).
The three branches moved into _do_POST; safe under the RLock-based
_CARD_LOCK because _test_run_start re-acquires it before spawning the
worker.
New tests/test_fetch_routes.py:
- a PWA<->server route/method matrix (every body-carrying pysimFetch needs
a POST route, body-less calls a GET/POST route; routes are extracted from
_do_GET/_do_POST incl. the 'self.path in (...)' and startswith forms) -
verified to fail on the pre-fix routing with exactly the three endpoints;
- an HTTP smoke test on the real handler: POST /api/test/run {} -> 400,
POST stop/clear -> 200, GET /api/test/run -> 404.
sw cache simple-v314; tests: 527 Python / 675 Node.
The TERMINAL PROFILE chain parsed the SET UP MENU title with 'tag == 0x05'
only, so the live Alfa card's title (CR-set 0x85, 'Alfa Mobile') was
dropped: /api/menu returned items without a title and the PWA showed
'No menu set by the card' - card-specific only because cards pick the tag
variant (this one sends plain 0x8F items and a CR-set title in the same
command).
- _parse_setup_menu_command (pure, tested with the live FETCH bytes)
replaces the inline parse; the PWA shows a title-less menu as 'STK: Menu'
instead of 'No menu set by the card' (stkMenuLabel, pure).
- _cmd_tlv is now the single lookup helper: exact tag, then tag ^ 0x80
(bit 8 is the CR flag, TS 101 220 7.1.1); the old '| 0x80'-only helper and
the duplicate _cmd_tlv_any are gone.
- Remaining single-style checks fixed: _parse_setup_menu_items (0x8F/0x0F),
_parse_select_item title (0x85/0x05), _find_sms_tpdu (0x8B/0x0B - the
plain variant lost the SEND SHORT MESSAGE PoR TPDU), the response
scripting parsers (R-APDU 0x23/0xA3, executed count 0x80/0x00) and the
FF21 resource tags (0x81-0x83/0x01-0x03).
- tests/test_tag_variants.py flips the CR flag on every top-level tag of
real command fixtures and asserts identical parse results for all
parsers (verified to fail when a single-style lookup is reintroduced).
sw cache simple-v313; tests: 524 Python / 675 Node.
__main__ built a plain HTTPServer (single-threaded): during a RAM install
POST every other request waited in the accept queue, including the 2 s
/api/status poll that feeds the operation modal - its bar and step
headline never moved and the whole result appeared only at the end (live
2026-09-29).
_build_http_server() now returns a ThreadingHTTPServer (daemon threads).
Card access is unchanged: it is serialized by _CARD_LOCK, not by the
server - every POST is blanket-wrapped in do_POST, every /api/ GET except
/api/status and /api/test/status is wrapped in do_GET, and the background
threads (STATUS poll, _bip_data_available, test runner) take the lock;
the audit found no card-access holes. do_GET also lets non-/api (static
PWA) paths bypass the lock, so page assets stay answerable during long
operations.
Regression test tests/test_http_concurrency.py: a fast request must
complete while a slow one is in flight (fails on HTTPServer with exactly
the reported symptom: 1.01 s vs 0.20 s); test_startup_cardless patches
the new factory.
sw cache simple-v312; tests: 519 Python / 674 Node.
The menu chain paused only for DISPLAY TEXT / SELECT ITEM / SET UP MENU,
so a GET INPUT was auto-answered with a bare success TR and no Text
string - the live RemMobileID PIN prompt got an empty answer.
Server: _parse_get_inkey/_parse_get_input read the prompt, qualifier
flags (digits-only, UCS2, Yes/No, immediate, hidden, packed, help),
Response length 91 and Default Text 9D; the fetch handler pauses with
them; _menu_send_response(..., text=) validates the answer (digits set,
min/max, one char for GET INKEY) and builds the Text string TLV 8D in the
requested coding (SMS unpacked 04 / UCS2 08 / packed 00 via _pack_gsm7),
Yes/No as 01/00, empty input as the null text string, help as result 13
and the variable-timeout Duration echoed (6.8.4). /api/menu-respond
takes text; /api/stk-status carries pending_data so a card-initiated
prompt opens the panel; _decode_cmd decodes both commands.
PWA: stkInputHtml/stkInputHint/stkInputValidate render the constrained
panel (password field for hidden entry, numeric keyboard, default text,
Yes/No buttons, help, immediate-digit auto-submit); OK submits through
stkMenuOk; the poll opens the panel for card-initiated prompts.
sw cache simple-v311; tests: 517 Python / 674 Node.
_send_envelope defined its SEND SHORT MESSAGE capture handler inside the
91xx branch, but the 'STATUS poll (PoR not captured)' path used it: a
packet whose ENVELOPE answered 9000 and whose late PoR arrived on the
STATUS poll raised UnboundLocalError, returned 500 and aborted the RAM
operation mid-packet with the card's command left pending (live
2026-09-29, 120-byte LOAD blocks). The handler is now defined for every
path, and the late-PoR poll runs only after a packet's last segment
(poll_status from _send_secured_packet) - a concatenated download makes
no spurious mid-packet STATUS exchanges.
The PWA annotates every LOAD step with the CAP components its block
covers (ramStepComponents: 'completes Import' / 'inside Method' /
'Header...Import') and ramInstallFailHint names the component the failing
block completed - the live import-verification rejection lands in the
block completing Import (6438/6985 at both 240 B and 64 B blocks).
sw cache simple-v310; tests: 509 Python / 672 Node.
capmem derives the minimum platform from the CAP's Import component
(javacard.framework -> Java Card level via the SDK-kit corpus, int flag)
and /api/cap-info exposes it; the CAP details show it as a Platform row
('Java Card >= 2.2.2 - CAP format 2.1 - int support').
A failed RAM install at a LOAD / INSTALL [for load] step now appends a
hint naming the import requirement and the smaller-block fallback
(ramInstallFailHint, pure): JC VM spec 4.5.2 makes every import a
'>= version' demand on the card's own packages checked while the load
file is verified - live 2026-09-29, a CAP requiring Java Card 2.2.2 was
rejected exactly at the block containing the end of Import (6438 at
240 B blocks, 6985 at 64 B), not at a step count.
sw cache simple-v309; tests: 507 Python / 670 Node.
The live log showed the "stuck" state: after the menu watchdog (60 s)
answered a pending command, the PWA kept the panel; the next click got
{'error': 'no pending command'}, 400 and that reply was fed to the dialog
handler as if it were a card answer. A page reload then cancelled in-flight
polls, flooding the log with BrokenPipeError tracebacks.
- stkMenuRespond detects the already-answered reply (stkNoPendingError) and
closes the panel (stkMenuPanelReset) instead of treating it as an answer;
the 5 s status poll drops the panel whenever the server reports
pending: false, even when the Phone tab is hidden.
- /api/terminal-profile (POST) and /api/rescue finish a pending command
with a cancel TR first, so re-sending the TP can never shadow an
unanswered FETCH.
- _send_json and _serve_static swallow BrokenPipe/ConnectionReset/
ConnectionAborted with one "CLIENT GONE" line (a reload cancels polls);
the handlers' state changes still stand.
Tests: stkNoPendingError + the already-answered respond path; version
3.6.35; sw simple-v308; stylesheet rebuilt.
A CAP install is a long chain of LOAD commands whose progress and results
were only visible at the bottom of a large form - and an interrupted
install can leave a half-loaded package.
- Server: _RAM_PROGRESS (+ _ram_progress_begin/step/end) records the live
step of the running RAM operation; /api/ram-install and
/api/ram-install-app wrap their chains in it (total = steps + 1 for the
format check) and /api/status carries it as ram_progress - lock-free, so
the 2 s poll works while the request holds _CARD_LOCK.
- PWA: #ram-op-modal (the STK panel pattern) blocks everything while a RAM
operation runs: title, spinner, status line, progress bar, per-step
result lines, Close disabled until it finishes; a beforeunload guard
protects the window during the run. install-cap, install-app /
make-selectable and Explore all use the shared helpers
(ramOpModalBegin/Status/Finish); the install results stay in the form
area as before once the modal is closed. The status poll feeds the modal
via ramOpProgress (headline from the pure ramOpProgressText).
- Tests: ramOpProgressText (JS) + the progress lifecycle (Python); the
card-state and capmem suites stub the DOM-bound hooks.
- Stylesheet rebuilt; version 3.6.34; sw simple-v307.
The suggested quota row mixed a decimal C6 with hex C7/C8, so C6=27246
could be misread as hex (about 6x off). It now renders as one consistent
line via the pure capQuotaText(sug): decimal bytes with the hex in
parentheses (C6=27246 B (0x6A6E) . C7=270 B (0x010E) . C8=5143 B (0x1417)),
with a tooltip naming the tags (C6 = non-volatile code space / load file,
C7 = volatile RAM, C8 = non-volatile data).
The static "Notes" disclosure (NVRAM definition + "estimate only") is
removed from the CAP details box - the help (EN/RU, the Install Package
row) carries it now; only the dynamic scan warnings (e.g. unknown opcode)
stay visible, since they mean the estimate is partial.
Tests: the new formatting pinned, the removed notes asserted absent;
stylesheet rebuilt; 664 frontend / 504 Python green; version 3.6.33;
sw simple-v306.
The RAM install form's toolkit parameters are the make-or-break field for
toolkit applets, and CA vs EA is easy to get wrong (the earlier live 6A80s).
- "SIM/UICC Toolkit parameters" is now an accented bordered fieldset (blue
border/legend, always visible in the cap / install / make-selectable
modes) with the checkbox in the legend and the fields inside.
- ramCapToolkitMode(imports) maps the CAP's linked libraries to the install
parameter family: sim.* (AID tree A0000000090003FFFFFFFF89...) -> SIM
Toolkit (Tag CA), uicc.* / uicc.usim.* (A0000000090005FFFFFFFF89...,
A0000000871005FFFFFFFF89...) -> UICC Toolkit (Tag EA) - family-based, so
access-only applets get the right field too. Applied when the block is
enabled and when the CAP is swapped while it is on, with a "detected from
the CAP" hint under the select; no CAP keeps the manual choice.
- Rebuilt style.css for the new accent classes; tests pin the fieldset and
the family mapping.
663 frontend / 504 Python green; version 3.6.32; sw simple-v305.
Even with the rebuilt style.css, three caching paths could still serve the
old file:
- the server sent Cache-Control: no-cache only for index.html/sw.js, so
browsers could heuristically cache style.css;
- the SW install precached with addAll(), which re-uses HTTP-cached copies,
so a new SW version could precache the stale file;
- the fetch handler is cache-first (fine once the cache is fresh).
Now every static shell file is served with Cache-Control: no-cache plus
Last-Modified and cheap 304 revalidation, and the SW install fetches each
precache URL with cache: 'reload' (CACHE simple-v304). A test pins the
install behaviour.
661 frontend / 504 Python green; version 3.6.31.
Note: the public demo simple.atroshin.ru is still v3.6.20 with the old
stylesheet - it needs a deploy of the current frontend/.
The compiled Tailwind stylesheet (frontend/style.css) had been stale since
2026-09-22: classes introduced later were missing from it, so the Install /
Make selectable chips had no background or text colour in light mode (dark
mode only looked green because an older dark:text-emerald-400 rule matched)
and the new w-28 action column did not apply.
- Rebuilt with `npm run build` (Tailwind + appended src/contrast.css);
verified the previously missing classes (bg-emerald-100, text-emerald-700,
hover:bg-emerald-200, bg-red-100, bg-blue-100, w-28, ...).
- Explorer rows are visible chips now: rounded bg-gray-50 dark:bg-slate-800/60
with a hover:bg-gray-100 highlight and the colored left accent kept (module
rows a subtler variant), so a right-column button is unambiguously tied to
its row; ISD/app/ELF/module rows all use the same treatment.
- AGENTS working conventions: an index.html change that introduces new
utility classes also requires `npm run build` in frontend/.
660 frontend / 504 Python green; version 3.6.30; sw simple-v303.
The explorer buttons sat inline after each AID/detail line, so their columns
moved with the text length. Now every entry (app / ELF) and every module
line is a row with a fixed-width action column (w-28):
- left cell: the text (module rows are siblings of their ELF entry, indented
pl-6, so their buttons share the same column as the entry buttons);
- right cell: the buttons, full width of the column, so Delete / Delete All /
Make selectable / Install line up vertically across rows.
All buttons go through ramActionBtn(label, action, tone): Danger (red) for
Delete / Delete All, Ok (emerald) for Make selectable and the **Install**
buttons, which were blue. Test pins the column width and the Install tone.
660 frontend / 504 Python green; version 3.6.29; sw simple-v302.
The RAM explorer's ramFmtPrivileges used a private table with wrong bits and
invented names ("Cum Deletion Ctr", "GSM Card Binding", "Global PIN",
"RFM"/"CFM") and no case for 0x80: a live ISD 9E printed four wrong names
and dropped Security Domain. Per GP Card Spec v2.3.1 11.1.2 Tables
11-7/8/9, 9E = Security Domain, Card Lock, Card Terminate, Card Reset, CVM
Management.
- ramFmtPrivileges now delegates to decodePrivileges (one spec table).
- decodePrivileges decodes byte 1's DAP pair per Table 11-7: b8+b7 = DAP
Verification, b8+b7+b1 = Mandated DAP Verification; the flag bits alone
are no privilege.
- The file had two decodePrivileges copies (the runtime used the later one,
the C-APDU parser test the earlier); the duplicate and its private table
are gone - the single implementation plus PRIVILEGE_NAMES live in the
parser section, which the test evaluates (converted to var like PARSE_INS).
- Tests: 9E/9A live values, the DAP pair, byte 2/3 spot checks; the
PRIVILEGE_NAMES spec pin moved to apdu_parse.
659 frontend / 504 Python green; version 3.6.28; sw simple-v301.
The explorer's FF21 block was titled "Memory (GET DATA FF21)" although the
tag is the Extended Card Resources Information (GP tag FF21, TS 102 226
8.2.1.7.2: installed applications, free non-volatile and free volatile
memory), and the detected RAM command format line sat between the Free NV
and Free Volatile lines.
- Heading is now "Card resources (GET DATA FF21)" with a tooltip naming the
tag and its three fields (EN/RU).
- The "RAM command format:" line moved after the resource lines.
- Help EN/RU spells out what FF21 returns; test asserts the format line
follows the resource lines.
657 frontend / 504 Python green; version 3.6.27; sw simple-v300.
GP 11.4.2.1 makes '10' the superset of '20' (Executable Load Files with
their modules), yet the Explore queried '20' plus a separate '10' modules
pass and merged the two. A live card answered 6A86 (incorrect P1-P2) to
'20' while '10' worked (2026-09-28) - all four P1 values "shall be
supported", so this is the guarded-fallback case, not a vendor branch.
- Explore now queries '10' (with module parsing) and falls back to '20'
(no module lists) only when it yields nothing; a successful fallback
drops the primary failure from the result, and the primary error surfaces
only when both fail.
- The separate P1=10 "modules" pass and ramMergeElfData are gone.
656 frontend / 504 Python green; version 3.6.26; sw simple-v299.
The E3 parsers existed since the vendor-trace work; what was missing was
issuing the query. Per GP 11.4.2.2 the compact listing format (P2.b2=0) is
deprecated and a card may reject it, while the expanded form (P2=02 + the
tag list 4F 9F70 C5 C4 CC CE EA) returns the richer registry data.
- ramExpandedQueryApdu(p1): the reference trace bytes
(80F2 <p1> 02 0C 4F005C084F9F70C5C4CCCEEA 00), pinned in a test.
- Explore: when the compact pass for a P1 yields nothing, the query is
retried in the expanded format and the result becomes the listing (the
compact error only surfaces if the retry also fails); the new "Query
expanded registry details (E3)" checkbox runs the expanded pass on top of
a working compact listing and merges the expanded-only fields
(privileges, ELF AID C4, SD AID CC, module lists) into the entries.
- The detected RAM command format (v3.6.24 ram_format) is now shown in the
Explore result + explorer view, the delete verdict and the plain-send
message.
- Tests parse the real trace payloads (NC ISD, ET application, NP ELF E3
templates); help EN/RU updated.
656 frontend / 504 Python green; version 3.6.25; sw simple-v298.
Comparing the new TCA vendor traces (Explore_EP/ET/NC/NP/SE) with our flow
showed why only one card works:
- The PoR capture was gated on SPI2 bit 0x20. The traced cards deliver the
PoR as a proactive SEND SHORT MESSAGE; with our ISD/memory queries
(SPI2=0x01) the fetched TPDU was thrown away - the Explore died with
"no data" and the RAM install steps silently degraded to an unverified
"no_por". The capture is now unconditional (inline ENVELOPE responses and
proactive submits both work), and the STATUS-poll fallback is enabled for
every card.
- `_ram_next_cntr` still wrapped at 32 bits (`% (2 ** 32)`): a 10-digit
counter like 10000AAAC8 came back as 00000AAAC9 after a RAM/Explore step -
the server-side half of the v3.6.23 counter report. It now advances the
full 40 bits.
- RAM command format (TS 102 226 5.2.1: compact C-APDU vs the expanded
`AA` > `22` form) is detected per operation and never stored:
/api/ram-install and /api/ram-install-app always probe, /api/send-ota
probes when the caller passes `ram_format`. The probe is a read-only
GET STATUS [ISD] as the first step (compact, then wrapped) and every
command of the operation uses the detected format. `_wrap_expanded_apdu`
is pinned to the reference bytes `AA0A220880F24000024F0000`; responses
carry `ram_format` and `final_cntr` (accepted probes consume counters, so
the views use the server's next counter). Applet-directed payloads stay
byte-exact; only RAM views (and RAM/GP chain packs) opt in.
504 Python / 653 frontend green; version 3.6.24; sw simple-v297.
spNextCntr coerced the 40-bit replay counter with `>>> 0`, so any counter
above FFFFFFFF lost its top byte after an accepted send: the live
10000AAAC8 came back as 00000AAAC9, and spCntrSyncPreset then stored the
broken value in the card preset - the RAM/Explore flows (ramIncrementCntr,
which is correct) inherited it.
- spNextCntr: 40-bit arithmetic (`% 0x10000000000`, wrap at FFFFFFFFFF
kept) instead of the 32-bit >>> 0 coercion plus slice(-10).
- spCntrAdjust (+/-): the same 40-bit wrap (an 11-digit value could be
produced at the maximum).
- tests: 10000AAAC8 -> 10000AAAC9, separator handling, FFFFFFFFF7 ->
FFFFFFFFF8, FFFFFFFFFFF -> 0000000000 wrap, out-of-range input clamps.
The server side (_increment_counter_hex, _ram_next_cntr, final_cntr) was
already exact. 653 frontend / 500 Python green; version 3.6.23;
sw simple-v296.
The event list tables carried labels like
"12 Reserved for 3GPP - Network rejection (TS 31.111 7.5.2)". The phrase is
an ETSI-to-3GPP document pointer, not a usage restriction, and it is not
what a user needs - the event name is.
- EVENT_NAMES (PWA + server mirror): the 3GPP-assigned codings carry their
plain TS 31.111 7.5 name ((I-)WLAN access status, Network rejection, CSG
cell selection, IMS registration, Incoming IMS data, Data connection
status change, CAG cell selection, Slices status change).
- 0x20-0x22: "Reserved (future usage)" (no attribution).
- 0x0B/0x14: the spec's full "(single access technology)" / "(multiple
access technologies)" wording instead of the cryptic "(single)/(multiple)".
- tests pin the exact names and that no name contains the cross-reference.
652 frontend / 500 Python green; version 3.6.22; sw simple-v295.
The plain "Send to Card" path refreshed the whole preset right before
sending (spRefreshFromPreset -> cardsApply -> cardsApplyFields) and
re-applied the preset's slot TAR - so a TAR typed for a push/link trigger,
an applet OTA message or the HTTP OTA admin params was silently replaced by
the preset's ISD TAR (the pack buttons for those sources deliberately leave
the TAR manual; the help even said so).
- spRefreshFromPreset(selId, keepTar): the plain send passes keepTar, so
the form's TAR survives; the counter, keys and SPI are still re-read.
- selecting a card preset, ramApplyCard and the chain packs still set the
TAR; the RAM operations keep the preset's ISD TAR by design.
- spParams()/getRamSpParams() normalise the TAR (strip/upper/pad to 6);
only the preview padded before, a short TAR went to the server raw.
- help EN/RU clarified, cards_counter/ram tests updated, sw simple-v294.
652 frontend / 499 Python green; version 3.6.21.
The v3.6.17 prefix built `C9` only when its field was filled, so filling the
C7/C8 quotas with an empty C9 produced `EF…`-only Install Parameters - and
GP Table 11-49 makes C9 mandatory, so the card rejected the data field with
6A80 (decrypted live packet: params started `EF08C7020000C8020000EA25…`).
- `ramParamsPrefix` always emits the C9 TLV (empty -> `C900`, like the
reference tools); the vendor form becomes `C900 EF08 C7020000 C8020000
EA…`.
- the raw "Install parameters (hex)" field is relabelled "Extra install
parameters (hex)" - it appends extra TLVs after the generated prefix.
- tests updated (empty prefix -> `C900`, quotas-only ->
`C900EF08C7020000C8020000`).
650 frontend / 499 Python green; version 3.6.20; sw simple-v293.
`_ram_send_gp_apdu` (the shared step sender of /api/ram-install and
/api/ram-install-app) now logs every step's plaintext APDU and packed
packet, like /api/send-ota's unconditional lines:
RAM C-APDU (INSTALL [for load]): 80E602000C07F0414C4641610100000000
RAM SECURED-PACKET (INSTALL [for load]): 00281516212525000000...
No flag - the step name keeps the sequence readable, and --apdu-trace stays
the card-level (ENVELOPE) trace. Tests: the logging pinned with stubbed
packet builders.
498 Python / 650 frontend green; version 3.6.19; sw simple-v292.
Iterating the final install step no longer needs a delete + re-load of the
.cap:
- `POST /api/ram-install-app` runs INSTALL [for install] (`mode: "install"`,
P1 0x0C/0x04 by make_selectable) or INSTALL [for make selectable]
(`mode: "make_selectable"`, GP 11.5.2.3.3 Table 11-44) for an already
loaded package. The APDU builders are shared with `_cap_apdu_sequence`
(`_cap_install_apdu`, `_cap_make_selectable_apdu` - one builder, no drift)
and the per-step send/PoR/counter logic is the extracted shared
`_ram_send_gp_apdu` (used by /api/ram-install too).
- PWA: the RAM op selector gains "INSTALL [for install] (loaded package)"
and "INSTALL [for make selectable]" with Load File / Module / Instance AID
inputs (instance defaults to the module AID); the result renders through
the shared `ramShowInstallResult` and `final_cntr` keeps the preset in
sync.
- Explore: an **Install** button on a package's module AIDs that have no
instance yet, and a **Make selectable** button on INSTALLED (0x03)
instances - both switch the op and pre-fill the AIDs.
- tests: the install APDU pinned to the live no-STK packet and to the
sequence tail, the make-selectable APDU, ramHasInstance, the Explore
buttons and the op wiring; docs/api.md updated.
650 frontend / 498 Python green; version 3.6.18; sw simple-v291.
The vendor's working install script (samples/uicc/applets/STK3) sends
`C9 22 <config> EF 08 C7 02 0000 C8 02 0000 EA 26 80 0A ... 81 18
<access>` - an applet config in C9 and memory quotas in EF. The RAM install
form now composes that prefix:
- "Applet-specific parameters (C9, hex)" -> `C9 <len> <value>`;
- "C7 / C8 memory quotas (bytes)" -> `EF <len> C7/C8 <2-byte int>` (4-byte
above 32767, GP 9.7);
- the prefix is prepended to the raw "Install parameters (hex)" field and
the server appends the STK part, giving `C9 EF EA`;
- `ramParamsPrefix`/`ramQuotaValue` are pure and tested (incl. the vendor's
`EF 08 C7 02 0000 C8 02 0000` form).
Also: `updateStkParamsHex` shows a hint naming the rejection reason (TAR not
a multiple of 3 bytes / menu ID > 7F / ADF AID not 5-16 bytes) instead of
silently emptying the field, and the UICC_SPECS.md install row notes that
`CA` sits inside `EF` and `CA`+`EA` together return 6A80.
647 frontend / 496 Python green; version 3.6.17; sw simple-v290.
- the ADF AID field gains a "From card" button: it reads the ADF.USIM FCI
via /api/select and extracts the DF name (tag 84) with the new
adfAidFromFci() - the AID is card-specific (the live card's is
A0000000871002FF49FF0589, 12 bytes; the base A0000000871002 is only a
prefix, and a shorter AID makes the card reject the access entry with
6A80).
- the priority field defaults to 255 (0xFF) and is labelled "(0 = RFU)":
TS 102 226 8.2.1.3.2.6 makes '00' RFU, which can break the toolkit
registration; the builder defaults an unset priority to 0xFF and the
chain rows follow.
- stkParamsBuild's formatted payload fields are uppercase now (the rest of
the tool's hex is; toString(16) emits lowercase).
- tests: adfAidFromFci pinned to the live FCI, the From-card wiring, the
updated form expectations.
643 frontend / 496 Python green; version 3.6.16; sw simple-v289.
The Explore delete showed "Failed: por_ok - remote SW 6700" while the delete
executed: ramDeleteApdu appended the trailing Le, and this card's SCP80
layer counts a trailing byte as a phantom second command whose SW 6700
masked the real result (count=2, last SW 6700) - the same quirk as
INSTALL [for load] before v3.6.8.
- ramDeleteApdu and the chain builder's DELETE row emit the case-3 APDU
(4F AID TLV, no Le); the SCP81 Delete-AID template follows (it reuses
ramDeleteApdu).
- tests updated (delete APDU expectations in ram/ram_counter_flow/scripts).
641 frontend / 496 Python green; version 3.6.15; sw simple-v288.
TS 102 226 8.2.1.3.2.2 defines the EA inner tags as 80 (toolkit params),
C3 (toolkit DAP), 81 (UICC Access Application specific parameters) and 82
(UICC *Administrative* Access) - the plain-text spec extract had shifted the
table columns, so the access list was emitted under 82. With the list under
82 the card rejected the ADF.USIM entry with 6A80 and the applet never got
its uicc.access.FileView rights (live 2026-09-28).
- stkParamsBuild emits the access list under 81 (the structure is unchanged:
the admin field is coded the same way per 8.2.1.3.2.2.4).
- tests updated (81 04 / 81 0F / 81 17 expectations).
641 frontend / 496 Python green; version 3.6.14; sw simple-v287.
"Failed: 9000" although the delete executed: the RAM helpers sent
`sp-spi2` - the base SPI2 select, whose default is "00 - No PoR" - so the
card answered the envelope 9000 with no PoR and the verdict treated the
missing PoR as a failure. `cardsApplyFields` also set `sp-spi2-hex` from
the preset and then `updateSp()` recomputed it from the selects (which the
preset never updated), clobbering the preset byte for anything reading it.
- `getRamSpParams()` reads the computed `sp-spi2-hex`; `cardsApplyFields`
syncs the SPI2 selects from the preset byte (base = low 5 bits, bit 0x20
= PoR via SMS-SUBMIT, dynamic option for unlisted bases) and the base
select gains the missing cipher + RC/CC/DS combinations (15/19/1D).
- a missing PoR is no longer a failure (the SPI may request none, and the
card sometimes refuses one): `OK` with the SW, or `OK (no PoR)`.
- a successful delete drops the object from the Explore result locally (no
re-explore): an applet row goes away; a cascade package delete also drops
the applets whose AID starts with the package AID. The consumed counter
is still saved.
- tests: ramRemoveFromExplorer (app/cascade/prefix), the no-PoR flow, the
SPI2 source guard, and the updated delete-flow stubs.
641 frontend / 496 Python green; version 3.6.13; sw simple-v286.
Live findings (2026-09-28): a browser-restored Receipt Generation privilege
bit (third byte, ISD-only per GP Table 6-2) was silently sent and produced
6985, and the '82' access entries were missing the mandatory "Length of
Access Domain DAP" byte, so the card rejected the ADF.USIM entry with 6A80.
- ramResetGrants() clears the privilege / toolkit-enable / file-access
checkboxes and refreshes the aggregates on load; ramInstallCap re-derives
the privileges from the checkboxes at send time - no stale or
browser-restored grant can be sent.
- the privileges aggregate emits 1 or 3 bytes, never the invalid 2-byte
form (GP Table 11-43), in both updateRcPriv and the chain's computePriv.
- '82' entries carry the DAP-length byte: '00 01 00 00' (shared FS) and
'<len> <ADF AID> 01 00 00' (ADF); the ADF AID is editable
(rc-tk-adfaid, default A0000000871002 = ADF.USIM, 5..16 bytes enforced).
- tests: ram_grants.test.js (aggregate forms, the send-time derivation, the
load-time reset) and the updated access-parameter shapes in
stk_params.test.js.
638 frontend / 496 Python green; version 3.6.12; sw simple-v285.
SIM toolkit applets installed while UICC-library applets failed at INSTALL
[for install] with 6F00 - including with the reference tool's exact install
parameters. The asymmetry: the SIM (CA) path grants file access via the
Access Domain field (default 00 = full access), while the UICC (EA) path
sent no '82' (UICC Access Application specific parameters) at all, and the
reference's '82 00' is empty. An applet importing uicc.access (the failing
CAP has 2 refs) can then fail inside its install().
- EA mode gains two checkboxes (RAM install form + the chain rows' toolkit
block): "File system access (full)" appends '82 03 00 01 00' (shared file
system + Access Domain Parameter 00 = full access, TS 102 226
8.2.1.3.2.2.2/8.2.1.3.2.5); "ADF.USIM access (full)" adds
'07 A0000000871002 01 00' to it. Both default off.
- tests: the access TLV shapes (with/without the ADF entry), the form -> hex
path with the checkbox, and the toolkit-field wiring count (16 fields).
635 frontend / 496 Python green; version 3.6.11; sw simple-v284.
The Apps query (P1=40) was sent with SPI2=0x01 while only the ELF queries
(P1=20/10) used SPI2=0x21. The Apps listing can exceed the ENVELOPE
response, and the card then answers the envelope PoR with
`actual_response_sms_submit` - the actual response would follow as an
SMS-SUBMIT, which is never sent unless the PoR is requested in submit mode.
The paginate only accepted `por_ok`, so the Explore reported the raw status
as an error ("Partial - Apps: actual_response_sms_submit") and the Apps list
never rendered (live 2026-09-28).
- `ramListingSpi2(p1)`: 40/20/10 -> '21', else '01'; the paginate uses it.
- the paginate accepts `actual_response_sms_submit` via `spPorAccepted` and,
when no data arrived, notes "response via SMS not captured" instead of
reporting the card status as a failure.
- the Explore delete verdict follows the same acceptance rule (an accepted
SMS-submit delete no longer shows "Failed" while its counter advanced) and
no longer prints a dangling " -> " without a SW.
- tests: ramListingSpi2 + the delete-accepted-via-sms-submit flow.
633 frontend / 496 Python green; version 3.6.10; sw simple-v283.
The RAM install form sent the `STK parameters (hex)` field, which was only
regenerated when the toolkit checkbox or the mode select changed - editing
the TAR (or any other toolkit field) afterwards was silently dropped. The
live install therefore carried the form defaults (TAR B00001, textLen 0,
menus 0, MSL 16, channels 0) instead of the entered AF4D01 / MSL 12 /
channels 1, and the card rejected the install parameters with 6A80
(TS 102 226 8.2.1.3.2.7: a TAR already assigned on the card).
- every `rc-tk-*` field regenerates the hex on input/change; the install
recomputes it at send time unless the user hand-edited the hex
(`dataset.manual`), so the edit order can no longer drop values;
- one pure `stkParamsBuild` serves the RAM form (`buildRcToolkitParams`) and
the RAM/GP chain rows (`buildTkParams`) - no drift between them (the chain
row also gains the menu-ID <= 7F check);
- applet TAR field: empty by default, no placeholder - B0 00 01 is the
allocated ADF RFM TAR (TS 101 220 Annex D), not an applet TAR; an empty
field is coded as TAR length 00 (the card may take a TAR from the AID only
when the AID carries one, PIX hex digits 15-20);
- the chain builder's INSTALL/LOAD rows drop the trailing Le (the v3.6.8
server form; a trailing Le made the card execute a phantom command);
- tests: stk_params.test.js (the decrypted live parameters, empty-TAR
coding, CA wrapper, long-form lengths, rejection cases, form wiring, and
the form -> hex path with the real builders) and ram_counter_flow.test.js
(the Explore delete persists the consumed counter through the real
ramSaveCntr); STK fixtures no longer use B00001.
631 frontend / 496 Python green; version 3.6.9; sw simple-v282.
INSTALL [for load]/LOAD/INSTALL [for install] carried a trailing Le and an
explicit ISD AID in the Security Domain field; the card executed the extra
byte as a second (phantom) command, so the compact response reported count=2
with SW 6700 - which the v3.6.2 remote-SW check correctly treated as a
failure, aborting at step 1.
Decrypted from the live trace (KIc/KID 25/25, 3DES): ours was
80E6020014 07F0414C46416101 08A000000003000000 00 00 00 00
the reference tool sends
80E602000C 07<aid> 00 00 00 00 (empty SD, no Le)
and its response is count=1 / 9000 while ours was count=2 / 6700.
- `_cap_apdu_sequence`: the SD AID is only sent when a custom one was
supplied (empty -> '00', the card defaults to the ISD; GP 11.5.2.3.1
Table 11-42) and all three RAM install APDUs are case 3 (no Le).
- tests: the expected INSTALL bytes updated, a no-Le assertion for every
APDU in the sequence, and a custom-SD-AID case.
615 frontend / 496 Python green; version 3.6.8; sw simple-v281.
Delete All worked but reset the preset counter: the handler never re-read
the preset (unlike ramExecute), saved N+1, then re-ran the Explore with the
OLD sp (counter N). Every page answered cntr_low, nothing was accepted, and
ramExplore's final ramSaveCntr wrote N back over the preset.
- ramDeleteFromExplorer re-reads the preset first (spRefreshFromPreset
'ram-card-sel'), advances and saves the counter only for a packet the card
accepted (spPorAccepted) - a rejected packet leaves it untouched - and
continues the follow-up Explore from the consumed counter instead of
replaying it.
- the delete result also checks the remote command's SW via a new
`ramRemoteSwOk` (9000 / 61xx / 62xx / 63xx / CAFE, mirroring the server's
`_ram_remote_sw_ok`): a por_ok packet whose DELETE was refused (e.g. 6A88)
no longer shows "OK" (the counter still advances, the card consumed it).
- ramExplore only saves the counter when it advanced, so a stale caller can
never lower a preset counter again.
- tests: flow tests for accepted / rejected / refused-remote-SW deletes
(refresh order, saved counter, the counter passed to the re-explore) and
the ramRemoteSwOk set.
615 frontend / 495 Python green; version 3.6.7; sw simple-v280.
ramDeleteFromExplorer() called an undefined `_ber_len()` helper, so clicking
Delete / Delete All raised a ReferenceError right after the confirm and no
APDU was ever sent. The inline builder also omitted the mandatory Le byte.
- new pure `ramDeleteApdu(aid, withCascade)` = GP Card Spec v2.3.1 Table
11-20/23 form: `80 E4 00 <p2> <Lc> 4F <len> <AID> 00` (P2 00 = object,
80 = object and related objects), used by the Explore handler.
- `scp81DeleteApdus()` (the "Delete AID" script template) now shares the
same builder: it used to send the raw AID without the mandatory '4F' TLV.
- tests: exact bytes for 7/16-byte AIDs and both P2 modes, the SCP81 script
expectations updated to the TLV form, and a wiring check that the undefined
helper call does not come back (`_ber_len(`).
611 frontend / 495 Python green; version 3.6.6; sw simple-v279.
Explore still missed the F0414C46416101 package on a card whose responses
wrap the R-APDU in the TS 102 226 5.2.2 Response Scripting template
(`AB <len> 80 <count> 23 <len> <R-APDU>`): `_decode_por` parsed that as a
compact response, so the frontend got `last_status_word` 81d0/7680 and data
starting `80 01 01 23 ...` instead of the listing.
- server: `_parse_response_scripting()` (AB definite / AF 80 ... 00 00
indefinite) extracts the executed-command count and the last R-APDU's SW
and data; `_decode_por` exposes it as `response_type: scripting` in the
same `decoded` shape as compact, so the RAM explore paging and the RAM
install `por_sw` see the real 9000/6310.
- frontend: the compact listing walk is deterministic on the AID length
(`len AID life ver`; P1=10 adds `module_count (len module_AID)*`).
`_parseRawAppEntry` no longer guesses `rawLen-1` for >8-byte AIDs (16-byte
A113 applet AIDs were truncated), and `_parseRawElfEntry` no longer scans
for `0x10` (a length/AID byte equal to 0x10 derailed the walk: a live page
parsed to 1 entry with no F0414C46416101).
- tests: exact trace fixtures - the ELF page lists F0414C46416101 (11
entries), the P1=10 page attaches its F0414C4641610101 module, the app page
keeps the 16-byte A113 AIDs; Python covers the scripting template
(definite/indefinite) against the live `AB 12` ISD and listing vectors.
610 frontend / 495 Python green; version 3.6.5; sw simple-v278.
Explore returned partial data (no ELF/module entries, the installed package
missing) and then failed with cntr_low. Two causes, both in the
actual-response SMS-SUBMIT path the card uses for big listings:
- `_find_sms_tpdu` read TLV lengths as a single byte; the FETCH carries
`8B 81 97 ...` (BER long form) for the big pages, so it returned a
corrupted, truncated TPDU.
- `_calc_ud_offset` treated the SMS-SUBMIT relative validity period (VPF=10)
as 7 bytes instead of 1, shifting the UD offset: `_parse_sms_concat` then
read a bogus UDH and reported no concatenation, so the segments never
assembled and the PoR/data was dropped ("RAM RESPONSE-PACKET: empty").
The step was marked failed, the counter did not advance, the same counter
was retried and the card answered `cntr_low`, which also blocked P1=10
(modules) where the installed package appears.
- the captured segments now always store the assembled UD (`submit_ud_hex`);
`_sms_submit_por()` rebuilds the DELIVER-style packet (`02 71 00` + UD) for
`_decode_por`. Verified against the live capture: por_ok, remote SW 6310,
438 hex chars of listing data (the exact bytes of the P1=20 page).
- `spPorAccepted` counts `actual_response_sms_submit` (0x0B) as accepted, so
the counter advances when the data follows via SMS-SUBMIT.
Explore queries follow GP Card Spec v2.3.1 11.4.2.2: compact listings
(P2.b2=0) with the chained GET RESPONSE (`ramGetStatusApdu`, paging P2=00 ->
P2=01), the malformed P2=02 attempt is gone, and the ISD-only query (P1=80)
never pages with next-occurrence (the card shall reject it).
Tests: Python SmsSubmitCaptureTest with the live FETCH bytes (TPDU length,
UD offset, concat reassembly, 027100+UD decode); ram.test.js checks the APDU
builder and the missing P2=02 attempt; cards_counter covers 0x0B.
608 frontend / 492 Python green; version 3.6.4; sw simple-v277.
The SCP80/RAM forms hold a copy of the preset (counter, keys, TAR, SPI).
Editing the preset on the Cards tab saved correctly, but the form kept the
old copy: the operation sent the stale counter (the card answers cntr_low)
and the post-send sync wrote the stale value back over the preset - the
saved counter silently reverted. Reproduced in a real DOM:
after select in SCP80: preset=0000000001 sp=0000000001
after Cards edit+save: preset=00000000AA sp=0000000001
after a sync: preset=0000000001 (edit lost)
- `cardsApply()` split into `cardsApplyFields()` (field copy, no packet) and
`cardsApply()` = fields + genSp; new `spRefreshFromPreset(selId)` re-reads
the selected preset from `sp-card-sel` / `ram-card-sel` and re-applies it.
- `pysimSendOta()` and `ramExecute()` call it before starting, so every
SCP80/RAM operation uses the preset as it is now.
- A rejected send no longer advances the counter: new `spPorAccepted(por)`
gates the advance+write-back in `pysimSendOta`, the Explore pagination and
its GET DATA step, and the server's RAM install (`_ram_next_cntr`: advance
only for `por_ok`/`no_por` steps). A failed install still returns
`final_cntr` (the accepted prefix) and the PWA persists it, so a retry
never replays a counter the card already consumed.
- tests: cards_counter.test.js (the stale-form regression, RAM selector,
fields-without-genSp, spPorAccepted) and `_ram_next_cntr` cases; the
cards_form/ram harnesses updated for the split.
- docs/api.md counter semantics; AGENTS preset-source-of-truth rule.
607 frontend / 488 Python green; version 3.6.3; sw simple-v276.
The RAM installer read `por['decoded']['response_status']`, but the compact
response decoder's `decoded` only carries {number_of_commands,
last_status_word, last_response_data} - so the suffix was always empty and
every step showed the useless `por_error_`, even when the PoR was por_ok.
The PoR verdict is the top-level `response_status`.
With that fixed, the decoded details also show that the remote command's own
status word was the real verdict all along: a captured live install returned
por_ok with `last_status_word` 6700/6F00 (the card rejected every RAM APDU)
while the installer reported success.
- new `_ram_step_result()`/`_por_remote_sw()`/`_ram_remote_sw_ok()`: a step
fails on a non-por_ok PoR, on a remote SW outside the success set (9000,
61xx more data, 62xx/63xx warnings, CAFE GP "more data"), or on an
undecodable PoR (a 9000 transport SW with no PoR at all is `no_por`, not a
failure). A decoded 61xx is explicitly success, per GP/ISO.
- step records gain por_sw/por_type/por_cntr/por_data/por_raw and
`por_error`; the response carries `failed_step` and a detailed error such
as `LOAD (1/9): remote SW 6700`; the log line now prints
`status=por_ok remote_sw=6700`.
- PWA: new pure `ramStepLine()` renders e.g.
`❌ Шаг 2: LOAD (1/9) — PoR ok · remote SW 6700 (Wrong length in Lc) · 274 B / 3 SMS`
(SW meaning via the existing lookupSw decoder) and the transport SW only
when it is not 9000.
- tests: tests/test_ota_helpers.py RamPorStepTest (success set incl. 61xx,
the captured 6700 failure, no-PoR/undecodable, expanded responses);
ram.test.js ramStepLine cases.
- docs/api.md RAM install step fields + failure semantics; AGENTS updated.
603 frontend / 487 Python green; version 3.6.2; sw simple-v275.
#phone-sub-esim was missing its closing </div> before #phone-sub-test, so
the browser parsed the test panel (and everything after) as a child of the
eSIM panel. Clicking Test script unhid the panel itself, but its hidden
ancestor kept it invisible - the pill has never shown a panel in a real
browser since it was added (v3.5.11). The eSIM LPA pill conversely showed
the whole test editor below its own fields.
The old whole-file div-count test stayed green because the inline script's
template strings happen to contain one extra </div>; the real markup was
409 opens vs 408 closes.
- add the missing </div>.
- html.test.js: count divs on the markup only (scripts excluded) and add a
structural walk (stray end tags, cross-nesting, unclosed elements, HTML
optional end tags honoured) over index.html, help.html and help-ru.html,
plus a Simulator-panel sibling-depth check. Run this for every HTML edit.
- the walk immediately found the same class of bug in both help pages: six
unclosed <section> chapters each; closed them.
- AGENTS: the HTML structure test is now part of the working conventions.
602 frontend / 482 Python green; version 3.6.1; sw simple-v274.
catarrh