With an eUICC in the reader the fast init raised SwMatchError twice and
fell back to the stock pysim init: pick_profile_no_reset() disables the
physical resets that CardProfile.match_with_card() normally performs, so
the successful SGP.22 probe leaves the ISD-R ADF selected. RuntimeState
then selects MF by FID (00 A4 00 04 02 3F00) from within the ADF, which
this card answers with 6A82.
- _restore_mf_after_probe() re-selects MF after the profile pick: the
cheap select keeps the reset-free path for normal cards, a physical
reset covers cards that refuse the MF select from an ADF.
- The EID read restores with rs.reset() (soft reset, escalating to a
physical reset) instead of rs.soft_reset(), which had the same trap.
- tests: FakeScc mf_select_error mode + two _restore_mf_after_probe
cases (no reset / exactly one physical reset).
A probe can leave a card in a context where CLA-00 file access returns
6d00, so the software MF select fails (stock pysim init survives only
because it resets physically after probing). Fast init now recovers the
same way, on demand:
- FastRuntimeState.reset() falls back to hard_reset() on
SwMatchError/ProtocolError (logged as FAST-RESET)
- init_card_fast() retries once after sl.reset_card() (FAST-INIT)
- __main__ falls back to stock pysim init once and skips
TERMINAL PROFILE/drain when no card was initialized (no more
6d00/6985 noise after a failed init)
- do_equip_fast() no longer pre-unregisters command sets; PysimApp.equip
does that after a successful init, so a failed equip keeps the
previous card/rs instead of leaving the app unequipped
Tests for the escalation, the retry and failed-equip state retention.
No card-model special cases.
pysim's init_card() resets the card once per profile candidate in
CardProfile.pick(), once in RuntimeState.__init__ and again in
PysimApp.equip(); on typical readers each reconnect costs ~1.3s and a
normal init/equip does 7-8 of them (measured: equip 9.85s, startup
~14.8s).
fastinit.py mirrors pySim.app.init_card() with the resets removed:
pick_profile_no_reset() runs all profile probes back-to-back on one
connection, FastRuntimeState.reset() is a software reset (select MF,
clear selected_adf/scp, ATR from the transport) and the equip/reset
commands are routed through do_equip_fast (one reconnect via
wait_for_card) and do_reset_fast (always a physical reset). Enabled
with --fast-init; stock behavior remains the default.
Tests for the reset-free pick, the soft reset and the explicit reset
paths. Docs updated; SW cache v88 -> v89.
catarrh