- the P3 row read "0x02 — 2 bytes" for both kinds of P3; the decode now marks
it (p3_kind): a command that carries data has Lc (the command-data length),
a case-2 command (APDU_SPEC 'le', e.g. READ BINARY/RECORD, GET RESPONSE,
SEARCH…) has Le (the expected response length). The detail row appends
"· Lc (command data length)" / "· Le (expected response length)"
(«Lc (длина данных команды)» / «Le (ожидаемая длина ответа)»)
- a SEARCH RECORD without an SFI searched the current EF (TS 102 221
§11.1.7.1) but showed no file at all; it now resolves like READ/UPDATE:
the SFI's declared file when SFI-addressed (an unresolved SFI stays marked
"SFI n"), otherwise the current selection — with the stale-selection note
when that EF is not a record file. Verified on session 193: the 5.371 s
search (P2=0x04, no SFI) now shows 4FA1, the 5.434 s one (SFI 2) shows 4F3A
- tests: p3_kind cases (Le/Lc/none) and the SEARCH target cases (current EF,
SFI-resolved, unknown SFI, transparent selection); a Node pin for the P3
row and the two new Russian strings; 540 Python + 77 Node tests
- PWA_VERSION/pyproject/version.py 2.7.9, SW cache simtrace-analyser-v89
- the PBR SFIs were learned only by the tracker; the message decode's
per-channel SFI map still did not know them, so the SEARCH RECORD addressed
by SFI 2 after the PBR read showed "SFI 2, unknown file" (the reported
case: session 193, 5.434 s — the PBR read at 4.451 declared ADN 4F3A/SFI 2)
- database._advance_state now parses an EF_PBR record it sees (a READ
RECORD's data or an UPDATE RECORD's body) and merges its FID+SFI pairs
into the channel's SFI map, so SFI-addressed SEARCH/READ resolve without
the file's own FCP
- the learned relations are cached per DF for the session: the live trace
leaves DF_PHONEBOOK for DF_TELECOM (SELECT 7F10/6F06) and comes back, and
the DF change used to rebuild the map from the static table only, dropping
the PBR's pairs — the re-entry now merges the session cache
- verified on session 193: the SEARCH at 5.434 s (SFI 2) now resolves to
4f3a (EF_ADN), as do the later ones (31.562/253.475/279.874 s)
- tests: the DB-level case — a PBR read, an excursion to DF_TELECOM and back,
then an SFI-addressed SEARCH asserting the declared file; 538 Python +
76 Node tests
- PWA_VERSION/pyproject/version.py 2.7.8, SW cache simtrace-analyser-v88
- EF_PBR (TS 31.102 §4.4.2.1) is the card's declaration of its phonebook:
the constructed tags A8/A9/AA announce the type-1/2/3 groups and each nested
primitive tag C0…CC names the file kind plus its FID — and, in a three-byte
object, its SFI (length 2 = FID only). pySim has no parser for it (its
EF_PBR class still carries a "# TODO: a80ac0034f3a…" stub), so the decoder
follows the spec: new simtrace_analyser/pbr.py
- the tracker decodes every EF_PBR record it observes (a READ RECORD's data
or an UPDATE RECORD's body) and uses it for the DF it belongs to: the
phonebook files get their symbolic names (4FA1 = EF_PBC, 4F3A = EF_ADN,
4F01 = EF_IAP, 4F4A = EF_EXT1, 4F3D = EF_CCP1, 4F61 = EF_EMAIL, …), an
earlier placeholder name is upgraded when the PBR arrives later, and the
declared SFIs feed the DF's SFI→FID map (so SFI-addressed reads resolve
without waiting for an FCP)
- verified on the live sessions 47/193:
DF_TELECOM/DF_PHONEBOOK/EF_PBC (4FA1) and the SFI map
{2→4F3A, 4→4FA1, 6→4F4A, 7→4F4F}
- also fixed: the "SFI = FID's five low bits" fallback (TS 102 221
§11.1.1.4.8) no longer applies to a DF/ADF's FCP, which has no SFI
- tests: tests/test_pbr.py (the two real records, SFI-less objects, padding,
truncation, merging, the shape check) and tracker cases (names, path,
SFI map, the later-PBR upgrade); 537 Python + 76 Node tests
- README/README_RUS document the PBR naming; PWA_VERSION/pyproject/
version.py 2.7.7, SW cache simtrace-analyser-v87
- the tracker kept only the immediate parent DF, so a phonebook file read as
"DF_PHONEBOOK/4FA1" — the trace's own selection path (00a4080406
7F105F3A4FA1) spells out the whole chain; the channel state now carries it
(selected_df_state() returns (df, path), e.g. ('5f3a', ['7f10', '5f3a'])),
the tracker stores it per file and _file_path() renders it:
"DF_TELECOM/DF_PHONEBOOK/4FA1"
- chain rules: a child DF selected by FID appends to the current chain, MF and
the ADF restart it, an AID is its own root, a path selection uses the DFs
in the path (an explicit '7fff' collapsing to the ADF), and an EF selects
keeps it. A leading MF is implicit in a longer path; MF-only files keep
"MF/…", ADF files "ADF/…" (the previous labels unchanged)
- the chain is learned from the FCP sighting too and extends a shorter path
recorded earlier, so entries created from a GET RESPONSE still get the full
path
- verified on the live traces (sessions 47/193): 5f3a/4fa1 ->
DF_TELECOM/DF_PHONEBOOK/4FA1, 5f3a/4f30 -> DF_TELECOM/DF_PHONEBOOK/EF_PBR
(4F30), while 3f00/2fe2 -> MF/EF_ICCID (2FE2) and 7fff/6f07 ->
ADF/EF_IMSI (6F07) stay as before
- tests: selected_df_state (path/FID/MF/ADF/AID/EF cases) and a tracker flow
with a path selection asserting the full path; 529 Python + 76 Node tests
- README/README_RUS show the chain; PWA_VERSION/pyproject/version.py 2.7.6,
SW cache simtrace-analyser-v86
- CLA decode (TS 102 221 §10.1.1/§10.3): standard channels 0-3 from b2-b1
and the extended channels 4-19 from b4-b1. The old further-format rule
read only b2-b1 (channel 8 read as 6, 19 as 7) and the ETSI '11x0 xxxx'
coding (0xC0-0xEF) was not handled at all; the class ranges now follow the
specs (0x80-0x8F UICC, 0xA0-0xAF SIM, 0xC0-0xEF ETSI extended, 0x20-0x3F
reserved, 0xFF invalid) and SM/chain are decoded per family — the SM
extraction and the chaining bit (b5, not b6) were off by one bit
- per-channel state: database._decode_rows/_replay_context use the shared
cla_channel() helper — before, CLA & 0x03 with no +4, so a channel-5
SELECT clobbered channel 1's selection and a channel-8 one channel 0's
(the local traces already open channels: 29 MANAGE CHANNEL opens, 1-2)
- COMPRION T=0 import: the synthesized GET RESPONSE keeps the channel —
a plain CLA for 0-3 (as real terminals do) and 01x0 for 4-19
- ATR historical bytes: the UICC's COMPACT-TLV objects (TS 102 221 §6.3.1)
with card service data, the card capabilities (ISO 7816-4 §8.1.1.2.7
Table 88: assignment methods and max logical channels — the workspace
cards announce 4 and "8 or more") and the status indicator ('00' trailing
bytes / the '8Y' TLV); a truncated ATR no longer raises
- MANAGE CHANNEL success replies decode the assigned channel byte
- capture/import: a 'tpdu' packet that is not APDU-shaped (shorter than the
header, CLA FF, ISO-reserved class) is skipped and counted, so a
character-level or mis-sampled stream no longer pollutes the decode
(the local DB's outlier sessions are exactly that)
- tests: CLA table vectors, per-channel state isolation on channels 8/12,
COMPRION GR channels, filetrack extended channels, ATR compact-TLV and
card-capability cases, the capture skip counter, the PWA rows; 527 Python
+ 47 Node tests
- README/README_RUS document the extended channels, card capabilities and
the skip counter; PWA_VERSION/pyproject/version.py 2.6.0, SW v72
- the file/DF/SFI dictionaries move to simtrace_analyser/ef_tables.py and are
extracted from the pinned specs: TS 102 221 (MF, Annex H.1), TS 31.102
(ADF USIM 4.2 and the child DFs 4.3/4.4/4.6, the H.1-H.12 SFI annexes, the
Annex L.6 Relay Node/certificate files; Annex A/E as the ADF/DF file
completeness cross-check), TS 31.103 and TS 51.011 - 20 DF tables (~370
entries) and 14 SFI tables, up from ~180 flat names and 3 SFI tables
- names are DF-scoped: a FID reused across DFs resolves to the file its DF
context names - 4F09 is EF_SUPI_NAI under DF_5GS but EF_PROSE_GC under
DF_ProSe, 6F07 is EF_IMSI in the USIM/SIM but EF_IST in the ISIM, 6F4E is
EF_EXT4 in DF_TELECOM but EF_EXT5 in the USIM ADF; the flat table keeps
only names that are identical everywhere and is the fallback when no DF is
known (the two names the old table had wrong there are fixed: 6F0A is
EF_AC_GBAUAPI, 6F53 EF_LOCIGPRS)
- the SELECT-path decoder resolves the 7FFF children against the USIM ADF
table, and the Files view names files DF-first - including files first seen
only via their FCP (a select-only file used to keep the bare FID, e.g.
ADF/6F3C is now ADF/EF_SMS (6F3C))
- tests/data/spec_files.json pins the extracted tables; tests/test_decode.py
asserts the DF/ADF tables cover them, the SFI tables match them exactly and
every flat name is a spec name for that FID; tests/extract_spec_tables.py
regenerates the fixture from the PDFs and --check re-verifies the tables
- README/README_RUS document the dictionary and its sources; PWA_VERSION and
pyproject/version.py 2.5.0, SW cache simtrace-analyser-v71
- new `simtrace_analyser/filetrack.py`: a single-pass tracker over a
session's decoded messages, keyed by (DF, FID) and trace-wide (resets only
wipe the per-channel selection): counters (`select`/`read`/`update`,
successful operations only), a sparse image of the observed bytes
(transparent files by offset, record files per record number) and the
change log
- changes: **device** = an UPDATE seen in the trace (applied to the image,
`no_change` flags a provable no-op); **card** = a READ whose bytes differ
from the image on bytes already known (logged at the surfacing read with
the changed ranges and the before/after hex; never-seen bytes just fill
the image, they are an observation, not a change)
- SFI-addressed accesses join the same entry as path/FID ones: the SFI ↔ FID
relations come from the normative tables and from every surfaced FCP `88`
DO (including the spec's "SFI = 5 LSBs of the FID" rule when the DO is
absent); an SFI used before its relation is learned stays provisional and
merges into the resolved entry
- the DF identity follows TS 102 221 §8.4/Table 8.2: `selected_df_fid()` now
resolves an EF path selection to its parent DF and returns `aid:<hex>` for
applications selected by an unknown AID (named from EF.DIR when the trace
surfaced it); `Database._decode_rows` gained an `on_message` hook and
`track_files()`
- `GET /api/sessions/<id>/files`: the operation timeline, the per-file
counters/coverage/change log, the SFI relations and the AID labels
- PWA: the side panel's Map/Stats tabs became a view selector (Map / Stats /
Files); the Files view is a timeline of Read / Update / Changed (card) rows
(colour-coded, the same file names as the Map view), a row click jumps to
the APDU (loading the pages it needs) and a card-change row's Δ opens the
changed ranges with the previous and the new bytes; EN/RU
- bounds: the image freezes past 64 KB of observed bytes per file, the change
log keeps the last 1000 events per file (counters keep counting)
- tests: tests/test_filetrack.py (counters, resets, channels, image/diff
semantics, record files, SFI resolution and the provisional merge, EF.DIR
labels, caps, the endpoint) and Node tests for the Files-view helpers and
wiring
- v2.3.0; MIN_SERVER_VERSION 2.3.0; SW cache simtrace-analyser-v63
- tag '18' (TS 101 220: "18 only"): one byte per item, §9.4 coding;
'00' and reserved values mean "no next action" (decoded to None)
- items[] now carry a per-item next_action; a list whose length differs
from the item count is preserved raw (spec requires X = item count)
- detail view renders "Item 0xNN: text → COMMAND"; the APDU-list summary
is unchanged — next actions are detail-only, as requested
- tests: 3 real SET UP MENU samples (local sessions 47/53/57) + a
length-mismatch tolerance case
- v2.1.2; SW cache simtrace-analyser-v57
- REFRESH '07'/'08': use the TS 31.111 §8.6 names ("Steering of Roaming" /
"... for I-WLAN", per TS 23.122 / TS 24.234) instead of "Reserved (...)"
- envelope tags 'E1'-'E3': TS 31.111 §9.1 leaves them reserved for future
usage — drop the placeholder label and decode them as unknown
- TR result '28' = Bearer Independent Protocol temporary error (TS 102 223
§8.12); '29' stays reserved
- PLI qualifier '0B' = MEID of the terminal added; '05' documented as
TS 31.111's Timing Advance (ETSI text says "Reserved for GSM")
- ISO 7816-4:2005 Table 6: add '62 86' (sensor) and '63 81' (file filled)
- drop the two fabricated '66xx' names (no such rows in the pinned specs)
- tests: add the new value tests plus a guard that no decoder table emits
a "Reserved ..." label
- v2.1.1; SW cache simtrace-analyser-v56
- terminal power supply (tag 80): voltage class per Table 6.1, maximum
current in mA, clock in 0.1 MHz steps ('FF' = not indicated)
- extended logical channels (tag 81) — zero length per §11.1.19.2.2, a
nonzero length is preserved as raw
- additional interfaces (tag 82 b1 = UICC-CLF)
- eUICC device capabilities: tag 83 per GSMA SGP.22 v2.6 §3.4.2 Table 7
(LUId/LPDd/LDSd/LUIe-SCWS); tag 84 preserved raw (no pinned SGP.32 spec)
- unknown/private TLVs preserved via raw_tlv
- concise APDU-list summary; decoded rows in the PWA detail view
- v2.1.0; SW cache simtrace-analyser-v55
- tests: 6 real samples from the local trace sessions (49/55/58/61/206/208)
- move the analysis server out of simtrace2_pysniff into simtrace_analyser;
simtrace2_pysniff stays as the simtrace2-sniff replacement capture utility
- new server CLI: simtrace-analyser-server; python -m simtrace_analyser
(simtrace2-pysniff-server and python -m simtrace2_pysniff.server dropped)
- simtrace2_pysniff lazy-imports hardware symbols, so the server no longer
pulls PyUSB at startup; the GSMTAP/PCAP codecs work without libusb
- version 2.0.0 everywhere (was 1.22.21); PWA SW cache simtrace-analyser-v54
- frontend: server name, clone URL and i18n strings updated; vendored-parser
reference otaman -> SIMple
- README/README_RUS reworked product-first (analyser first, utility second)
- DB dir ~/.simtrace-analyser, /api status payload and hosted PWA unchanged
- _build_summary: fold cmd.location_status (Normal/Limited/No service)
into the 'Location status' event entry, e.g. 'Location status: Normal
service' (the detail view already showed it)
- tests: summary assertions for the Normal/No-service vectors
- Backend-only, no version bump
- _build_summary: append 'DA <tp_da>' after the SMSC part for the
MO SHORT MESSAGE CONTROL envelope (the envelope decoder already
stores the second address TLV as cmd.tp_da; the detail view already
showed it)
- test: constructed D5 envelope with SMSC + destination address
- Backend-only, no version bump
- decode.py: _build_summary emits 'Data: N bytes — FCP of <file> (...)' for
STATUS responses with data (FCP already decoded into decoded.response);
_fcp_brief builds the 'FCP of MF (DF or ADF)' / 'FCP of EF_xxx (...)'
fragment
- index.html: cmd_description suppresses the raw-hex fallback for
body-less STATUS rows (nothing to describe beyond type + SW)
- tests: no-data STATUS summary None; DF/EF FCP summaries; pluralization
- Bump 1.22.19, SW cache v50->v51
- More precise than 'ATR STARTS' (the ATR starts after the de-assert
delay, not at the edge) while staying human-friendly; reads as a pair
with 'RESET ASSERTED'
- Update tests and both READMEs (backend-only, no version bump)
- capture.py: map GSMTAP PPS request/response (0x02/0x03) to 'pps',
matching the pcap-import mapping (was decoded as TPDU live)
- decode.py: parse the optional RST CLK extension (sigrok v1.9.0+,
payload flag bit 0); ATR gains clk_hz/data_rate/etu_us derived from
TA1 Fi/Di (data_rate = clk_hz × D / F)
- database.py: CLK state is consumed by the next ATR (no stale rate
for an ATR without preceding RST); a late-arriving RST measurement
is backfilled onto the ATR it belongs to; replay context carries
the CLK across pagination/live polling
- PWA: ATR detail shows CLK/Data rate/ETU; RST event detail shows CLK
- tests: PPS mapping, CLK parse with/without flag, rate math,
DB consume + backfill round-trips
- README/RUS updated
- Bump 1.22.18, SW cache v49->v50
T=15 in the ATR is a Protocol-and-Parameter-Selection capability,
not a data protocol like T=0/T=1. Previously 'Protocols: T=0, T=15'
was misleading.
- _decode_atr: exclude T=15 from protocols, set pps=True instead
- TCK presence: only-t0 rule now also requires no PPS (T=15 implies TCK)
- PWA ATR detail: 'Protocol: T=0' + 'PPS: supported' rows
- +1 test with the real UICC ATR (3B 9F 95 80 1F C7 ...)
- Bump 1.22.2, SW cache v33->v34
_decode_nai (decode.py) only treated an all-0xFF record as empty.
A record that is a lone identity tag, or a tag with a zero-length
value (e.g. 80 00 + FF erase filler — a standard unused EF_IMPU
record) slipped through to an ascii fallback and rendered as garbage
text (the "Text: �" artifact).
- Treat a lone tag (80 / 81) or tag+zero-length-value (80 00 / 81 00)
as empty.
- Only decode the TLV *value* bytes (UTF-8); never feed the TLV header
or trailing FF filler to the text decoder. Drop the fragile
raw.rstrip(...).decode('ascii','replace') fallback.
Tests: +4 (empty 80 00+FF record, all-FF, real SIP URI, lone tag).
Backend-only; stays on 1.22.0.
- decode.py: use the GSMTAP_FLAG_BAD_FCS constant instead of a literal
0x01 in gsmtap_flag_names() (import from ..gsmtap); no behavior change.
- tests: add a DB round-trip test (insert_message with BAD_FCS flag →
get_messages → decoded.errors) covering the end-to-end path, not just
the direct decode_sniff_msg call.
sigrok-iso7816-stream sets GSMTAP_FLAG_BAD_FCS (0x01) in the GSMTAP
header `res` byte on desynced TPDUs (mis-framed exchanges kept for
forensics). Propagate that flag through the whole pipeline so such
packets are explicitly surfaced instead of decoding as garbage:
- gsmtap.py: GSMTAP_FLAG_BAD_FCS const; GsmtapReceiver.read_packet()
now returns (sub_type, data, flags) from the res byte.
- server/capture.py: GsmtapListener forwards the flags to the DB.
- pcap.py: _parse_gsmtap_hdr/_scan_gsmtap/extract_gsmtap and
parse_pcap/parse_pcapng now yield a (ts, type, payload, flags)
tuple, so the flag survives a PCAP/PCAPNG round-trip.
- server/server.py: PCAP import stores the flags.
- server/decode.py: gsmtap_flag_names() maps bit 0x01 to
'bad FCS (desynced)'; merged into decoded errors for tpdu/atr/pps
and rst/vcc, so the frontend ⚠ badge + Errors row flag the entry.
User-visible: desynced TPDUs show a ⚠ "bad FCS (desynced)" marker
in the trace and detail views. Tests: +4 (decode BAD_FCS markers,
PCAP flag round-trip); existing tests updated for the new tuple
arities. Version 1.22.0, SW cache simtrace-analyser-v32.
Support the sigrok-iso7816-stream decoder (FX2 logic-analyzer passive
SIM sniffer, github.com/anttro/sigrok_iso7816_stream) which streams
GSMTAP-SIM on UDP 4729 and adds two custom sub-types for line events.
- gsmtap.py: GSMTAP_SIM_RST_EVENT (0x10) / GSMTAP_SIM_VCC_EVENT (0x11).
- capture.py: gsmtap_msg_type() maps 0x10→'rst', 0x11→'vcc' (shared by
the listener and tests); pcap.py _SUB_TYPE_NAMES gains the same
entries so PCAP re-imports of these captures preserve the events.
- decode.py: decode_line_event() decodes [direction, level, reserved]
into reset asserted/de-asserted or power applied/removed + level;
routed through decode_sniff_msg.
- database.py: reset-assert and power-removal invalidate the per-channel
file selection (card-level transition); de-assert / power-on are
markers only.
- frontend: RST/VCC labels (RESET ASSERTED / VCC OFF, …), a detail-view
branch (Event + Level + raw), and list styling (.apdu-type.rst/.vcc).
README notes the custom sub-type compatibility. Tests: +8 (line-event
vectors, sniff routing, subtype + PCAP round-trip mappings) — 359
total. Version 1.21.0, SW cache simtrace-analyser-v31.
Adds optional decryption of ciphered secured packets, entirely in the
browser — the key never leaves the frontend.
- decode.py: _decode_secured_packet exposes 'cipher_block' (the
contiguous on-wire ciphered octets CNTR..end, ready for CBC) and
raw kic/kid bytes for algorithm selection. Additive only.
- index.html: pure-JS DES/3DES core (FIPS 46-3 bit-array tables,
parity ignored) + CBC; AES-CBC via native SubtleCrypto; both with
zero IV per TS 102 225. decryptSecured() picks the algorithm from
the KIc nibble (02 AES-CBC, 05 3DES-2K, 09 3DES-3K, 01 DES) with
key-length validation.
- UI: ciphered packets show a key-hex input + Decrypt strip below the
detail table; keys are memoized per key-set for the session in an
in-memory OTA_KEYS map — never sent to the server, never persisted.
- Decrypted results cached by cipher_block (survive live-polling
re-renders); plaintext rows rendered as CNTR/PCNTR/RC/Secured data
(decrypted) alongside the ciphertext; wrong-key guard via the
decrypted padding counter (PCNTR > remaining → "invalid padding").
- 3DES implementation validated byte-identical against openssl
des-ede3-cbc (3-key, 2-key ×3 random vectors, single-key).
No CC verification (out of scope). Tests: +2 (cipher_block
contiguity, AES registry guard) — 350 total. Version 1.19.0,
SW cache simtrace-analyser-v27.
User-reported: the decoded CNTR (0x1830A44E41 ≈ 104 billion) cannot
be the real counter — the OTA platform shows ~200 for that card.
Root cause: per TS 102 225 Table 2 note 1, when SPI indicates
ciphering the whole block from CNTR through the secured data
(CNTR, PCNTR, RC/CC/DS, secured data) is ENCRYPTED. Only CPI, CPL,
CHI/CHL, SPI, KIc, KID and TAR travel in the clear. Our decoder
parsed the ciphertext bytes as if they were the real CNTR/PCNTR/RC
and presented them as such — misleading (the true values are only
recoverable after 3DES decryption with the card's keys).
Fix:
- _decode_secured_packet: emit 'ciphered': True when SPI1.b3 is set
(wire hex values kept for reference); docstring documents the
ciphered block.
- _decode_response_packet: accepts ciphered (command SPI2.b5, PoR
ciphering) and flags the response likewise; database context now
carries por_ciphered from the ENVELOPE so the GET RESPONSE PoR
inherits it. Standalone SMS-SUBMIT PoRs carry no SPI — state
unknowable, defaults to False (documented).
- Frontend: CNTR/PCNTR/RC-CC-DS labels get "(encrypted)" when the
respective packet is ciphered (command, response, and ENVELOPE
response renderings).
Tests: +4 TestSecuredCiphering (ciphered flagged, unciphered plain
CNTR e.g. 200, response flag, PoR-via-context). 348 total. Version
1.18.0, SW cache simtrace-analyser-v26.
stk_test1 msg 14036 regression: READ BINARY of EF_SPDI returned
"No decoded data available" — _decode_spdi (added v1.16.0) parsed
the A3 container value as bare 3-byte records (missing the inner
'80' value TLVs) and returned a list of strings, while
_build_summary/_file_summary expects the EF_PLMNwAcT shape
(list of {mcc, mnc} dicts). The resulting TypeError aborted the
whole message decode — this was the source of the 28 "Decode
error ... string indices" messages seen across all sessions.
_decode_spdi now unwraps inner '80' TLVs (bare-records fallback
kept) and always returns {'plmns': [{mcc, mnc}...]}. Replay of all
33 sessions: decode exceptions 28 → 0 (2 remaining undecoded tpdu
are 1-byte truncated capture records, not decodable by nature).
Tests: +3 (standard inner-80 form, bare-records fallback, exact
stk_test1 regression via decode_message). 344 total. Version
1.17.1, SW cache simtrace-analyser-v25.
mobileid_activate_setpin_resetpin_20201222 regression: UPDATE BINARY
(plain offset addressing) after an SMS-PP DOWNLOAD / proactive group
showed "Writes: —" in the map view, although selection tracking kept
EF_SMSS selected the whole time.
Root cause: the sel-based branch only emitted result['file'] when
_decode_file_data() produced content — files without a registered
content decoder (EF_SMSS 6F43) silently lost attribution. The first
write only displayed via the frontend's SELECT-note fallback, which
masked the bug until a proactive group split the RW run.
Fix: decouple attribution from content decoding in both the command
branch and the GET RESPONSE branch — when the selected file has no
content decoder (or the offset is non-zero, where content decode is
intentionally skipped), emit {fid, ef} so the map, list, and detail
views always name the file. Content decoders still take priority.
Session 63 now decodes all three UPDATE BINARY ops as ADF/EF_SMSS.
Tests: +4 TestFileAttribution, one expectation updated to the new
contract — 342 total. Version 1.16.1, SW cache v23.
Spec verification against UICC_SPECS.md / TS 102 223 V18.3.0 §8.6
showed the Command Qualifier for SET UP IDLE MODE TEXT is RFU
("this byte is RFU") — no icon self-explanatory bit exists in any
generation (GSM 11.14 predates the command; TS 31.111 does not
override it). The v1.11.0 _idle_text_qualifier decoded bit 1 as
"icon self-explanatory" from an unverified source.
Remove the decoder; the command now uses generic RFU handling
(hidden at '00', raw hex otherwise). Tests updated accordingly.
Version 1.15.1, SW cache v21.
Self-review of 174df8a/d0f8fb8 found two real bugs plus smaller items:
- _decode_timer_value read semi-octets high-nibble first; TS 23.040
coding (referenced by §8.38) puts the first digit in the LOW nibble
— "09:25:03" decoded as "90:25:03". Regression test added with an
asymmetric vector; the original symmetric vectors masked the bug.
- TIMER MANAGEMENT qualifier used bits b2-b3 instead of the spec's
bits 1-2 (q & 0x03): '01' deactivate was hidden, '02' printed
"deactivate timer", RFU '04' printed "get current timer value".
Decoder fixed and wrong expectations corrected.
- Stale text_note: a compliant 8D Text String arriving after the
non-standard '10' quirk TLV now clears the note.
- Proprietary type format unified to uppercase ("Proprietary (0xF2)").
- GET INKEY: Yes/No bit now suppresses the b1/b2 character-set parts,
matching §8.6 ("character sets ... are disabled").
- Frontend renders string timer_id values verbatim instead of NaN.
Tests: +4 regressions, expectations corrected — 320 total.
Phase 3 of the spec audit: TS 102 223 §8.6 qualifier coverage for every
command that defines a coding (verified against V18.3.0 text):
- Value tables: SET UP CALL ('00-'05), LAUNCH BROWSER, GET READER
STATUS, SET FRAMES, ENCAPSULATED SESSION CONTROL ('00-'04), LSI
COMMAND ('00/'01).
- Bitmask decoders (deviations from default shown; all-default hidden;
pure-RFU falls back to raw hex): SEND SHORT MESSAGE packing bit,
PLAY TONE vibrate, DISPLAY TEXT / DISPLAY MULTIMEDIA MESSAGE
priority + clear-delay, GET INKEY (alphabet/UCS2/Yes-No/immediate-
digit/help), GET INPUT (alphabet/UCS2/hidden/packed/help),
SELECT ITEM (presentation type/soft key/help), SET UP MENU,
TIMER MANAGEMENT (start/deactivate/get value), LANGUAGE NOTIFICATION,
OPEN CHANNEL (link establishment/reconnection/background/DNS with
bearer-dependent note), CLOSE CHANNEL (NAA reuse note), SEND DATA,
DECLARE SERVICE.
- RFU-byte commands (MORE TIME, POLL INTERVAL, SEND SS/USSD, ACTIVATE…)
keep raw-hex fallback.
Tests: +11 TestQualifiers cases — 317 total. Version 1.14.0, SW cache
simtrace-analyser-v17.
TS 102 223 §6.6.13 support for the SET UP IDLE MODE TEXT (0x28)
proactive command:
- Command qualifier: COMMAND_QUALIFIERS entries may now be callables
for bitmask-style qualifiers; _idle_text_qualifier decodes bit 1
as "icon self-explanatory", hides 0x00, falls back to raw hex on
RFU bits.
- Icon Identifier TLV (0x1E) parsed into icon_id (image record
number in EF_IMG, 0 = none); rendered as an "Icon" detail row in
the PWA.
- Zero-length Text String TLV now yields text='' ("remove idle mode
text") instead of being silently skipped.
Tests: +6 TestIdleModeText cases (8-bit/UCS-2 text, icon TLV,
qualifier variants, empty text) — 285 total. SW cache bumped to
simtrace-analyser-v14.
- Add a P2 spec for AUTHENTICATE (auth context bits + specific-reference-data
flag), so P2 is displayed instead of only leaking through cmd.context.
- Fix P1 name to 'No indication' (was the misleading 'Run GSM algorithm').
- Decompose AUTN into SQN(xor)AK / AMF / MAC and AUTS into SQN(xor)AK / MAC-S
per TS 33.102; surface 'specific reference data' key flag.
- SW column now shows green (success 90/92-9F), blue (pending 61/91/6C),
amber (warning 62/63), red (error 64-6F) per ISO 7816-4 / TS 102 221.
- _decode_nai: treat all-FF records as empty instead of emitting
replacement characters; strip FF padding before the ASCII fallback.
- Only update the selected-file state on a successful SELECT (SW1 in
61/62/63/90/91/92/9E/9F); a failed SELECT (e.g. 6A82) leaves the
current file unchanged.
- Track the file structure from the FCP (GET RESPONSE after SELECT).
- Skip file decoding for record ops (READ/UPDATE/SEARCH RECORD) when the
selected file is transparent/DF, marking the result 'stale' instead of
decoding garbage — this catches silently-dropped SELECTs.
- Track the currently selected file (SELECT by FID/path) across the
session and pass it to the decoder; reset on ATR/card change; seed via
a bounded backward scan on paged views.
- Decode READ BINARY/RECORD, UPDATE BINARY/RECORD and (via GET RESPONSE)
SEARCH RECORD bodies using a FILE_DECODERS registry: IMSI, ICCID,
LI/PL, ADN-format (MSISDN/SDN/FDN/...), SMS records (SMSC + TPDU),
UST/SST/IST service tables, PLMN lists (+access tech), EF_DIR,
CBMI/R, ARR, PNN, ECC, SPN, LOCI, ACC, Phase, ISIM IMPI/DOMAIN/IMPU.
- File formats verified against TS 51.011 / TS 102 221 / TS 31.102
(PLMNwAcT is 5-byte entries; EF_SMS = status + SMSC + TPDU; ISIM
identities are 0x80 TLV).
- Offset != 0 READ BINARY/UPDATE BINARY is skipped (fragment reads).
- SEARCH RECORD results (record numbers) decoded in GET RESPONSE.
- GET RESPONSE summary now shows FCP file type/structure/size.
- New 'File data' section in the detail view.
catarrh