catarrh/simtrace
1
0
Fork 0
mirror of https://gitea.osmocom.org/sim-card/simtrace.git synced 2026-03-16 21:28:36 +03:00
Code Issues Packages Projects Releases Wiki Activity

doc: Reformat the text to have a 80 char line limit

Browse Source
This commit is contained in:
Holger Hans Peter Freyther
2011-08-14 14:36:43 +02:00
parent b230ec61fc
commit 41cb9903c0
1 changed files with 28 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

39
docs/chapters/hardware_details.xml
View File

@@ -45,37 +45,54 @@
</imageobject>
<calloutlist>
<callout arearefs="usb" id="link_usb">
<para>USB: USB mini-B connector. The main connector. The host software communicates (sniffing,...) through USB with the board. It can also be used to flash the micro-controller (using DFU).</para>
<para>USB: USB mini-B connector. The main connector. The
host software communicates (sniffing,...) through USB with
the board. It can also be used to flash the micro-controller
(using DFU).</para>
</callout>
<callout arearefs="serial" id="link_serial">
<para>serial: 2.5 mm jack serial cable, as used by osmocomBB. port used to debug the device (printf goes there).</para>
<para>serial: 2.5 mm jack serial cable, as used by osmocomBB
port used to debug the device (printf goes there).</para>
</callout>
<callout arearefs="debug" id="link_debug">
<para>debug (P3): same as serial, but using the FTDI serial cable.</para>
<para>debug (P3): same as serial, but using the FTDI
serial cable.</para>
</callout>
<callout arearefs="jtag" id="link_jtag">
<para>jtag (P1): JTAG 20 pin connector to do hardware assisted debugging.</para>
<para>jtag (P1): JTAG 20 pin connector to do hardware
assisted debugging.</para>
</callout>
<callout arearefs="bt1" id="link_bt1">
<para>BT1: battery connector (4.5-6V DC). normally the USB provides power, but the battery port can be used for autonomous use of SIMtrace. The sniffing can be saved in the flash (U1).</para>
<para>BT1: battery connector (4.5-6V DC). normally the
USB provides power, but the battery port can be used
for autonomous use of SIMtrace. The sniffing can be saved
in the flash (U1).</para>
</callout>
<callout arearefs="ffc" id="link_ffc">
<para>FFC_SIM (P3): to connect the flat flexible cable with SIM end for the phone.</para>
<para>FFC_SIM (P3): to connect the flat flexible cable with
SIM end for the phone.</para>
</callout>
<callout arearefs="sim" id="link_sim">
<para>SIM (P4): put your SIM in there (instead of in the phone)</para>
<para>SIM (P4): put your SIM in there (instead of in the
phone)</para>
</callout>
<callout arearefs="reset" id="link_reset">
<para>reset (SW1): to reset the board (not erasing the firmware). If your are too lazy to unplug and re-plug the USB.</para>
<para>reset (SW1): to reset the board (not erasing the
firmware). If your are too lazy to unplug and re-plug
the USB.</para>
</callout>
<callout arearefs="bootloader" id="link_bootloader">
<para>bootloader (SW2): used to start the bootloader so to flash the device using DFU. press when plugging in the USB.</para>
<para>bootloader (SW2): used to start the bootloader so
to flash the device using DFU. press when plugging in
the USB.</para>
</callout>
<callout arearefs="test" id="link_test">
<para>test (JP1): short circuit using a jumper to flash using SAM-BA.</para>
<para>test (JP1): short circuit using a jumper to flash
using SAM-BA.</para>
</callout>
<callout arearefs="erase" id="link_erase">
<para>erase (JP2): short circuit using a jumper to erase completely erase the firmware.</para>
<para>erase (JP2): short circuit using a jumper to erase
completely erase the firmware.</para>
</callout>
</calloutlist>
</imageobjectco>