mirror of
https://gitea.osmocom.org/sim-card/simtrace2.git
synced 2026-03-16 21:28:33 +03:00
split board.h into generic part and simtrace-specific part
This commit is contained in:
Harald Welte
@@ -91,6 +91,7 @@ NM = $(CROSS_COMPILE)nm
|
||||
INCLUDES_USB = -Iatmel_softpack_libraries/usb/include
|
||||
|
||||
INCLUDES = -Iinclude_board -Iinclude_sam3s -Iinclude -Isrc_simtrace
|
||||
INCLUDES += -Iinclude_board/simtrace
|
||||
INCLUDES += -Icmsis
|
||||
INCLUDES += $(INCLUDES_USB)
|
||||
|
||||
|
||||
112
firmware/include_board/board_common.h
Normal file
112
firmware/include_board/board_common.h
Normal file
@@ -0,0 +1,112 @@
|
||||
#ifndef _BOARD_
|
||||
#define _BOARD_
|
||||
|
||||
/** Headers */
|
||||
#include "chip.h"
|
||||
/* We need this for a nop instruction in USB_HAL.c */
|
||||
#define __CC_ARM
|
||||
|
||||
/** Board */
|
||||
#include "board_lowlevel.h"
|
||||
#include "uart_console.h"
|
||||
#include "iso7816_4.h"
|
||||
#include "led.h"
|
||||
#include "cciddriver.h"
|
||||
#include "usart.h"
|
||||
#include "USBD.h"
|
||||
|
||||
#include "USBD_Config.h"
|
||||
#include "USBDDriver.h"
|
||||
|
||||
/** Highlevel */
|
||||
#include "trace.h"
|
||||
#include "stdio.h"
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
#include "inttypes.h"
|
||||
|
||||
#include "simtrace.h"
|
||||
|
||||
#define MIN(a, b) ((a < b) ? a : b)
|
||||
|
||||
#ifdef __GNUC__
|
||||
#undef __GNUC__
|
||||
#endif
|
||||
|
||||
/** Family definition (already defined) */
|
||||
#define sam3s
|
||||
/** Core definition */
|
||||
#define cortexm3
|
||||
|
||||
#define BOARD_MAINOSC 18432000
|
||||
#define BOARD_MCK 48000000
|
||||
|
||||
#define LED_RED PIO_PA17
|
||||
#define LED_GREEN PIO_PA18
|
||||
|
||||
#define PIN_LED_RED {LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
#define PIN_LED_GREEN {LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
|
||||
|
||||
#define LED_NUM_RED 0
|
||||
#define LED_NUM_GREEN 1
|
||||
|
||||
/** USART0 pin RX */
|
||||
#define PIN_USART0_RXD {PIO_PA9A_URXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
/** USART0 pin TX */
|
||||
#define PIN_USART0_TXD {PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
|
||||
#define BOARD_PIN_USART_RXD PIN_USART0_RXD
|
||||
#define BOARD_PIN_USART_TXD PIN_USART0_TXD
|
||||
|
||||
#define BOARD_ID_USART ID_USART0
|
||||
#define BOARD_USART_BASE USART0
|
||||
|
||||
#define PINS_UART { PIO_PA9A_URXD0|PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
|
||||
/** UART0 */
|
||||
/** Console baudrate always using 115200. */
|
||||
#define CONSOLE_BAUDRATE 115200
|
||||
/** Usart Hw interface used by the console (UART0). */
|
||||
#define CONSOLE_USART UART0
|
||||
/** Usart Hw ID used by the console (UART0). */
|
||||
#define CONSOLE_ID ID_UART0
|
||||
/** Pins description corresponding to Rxd,Txd, (UART pins) */
|
||||
#define CONSOLE_PINS {PINS_UART}
|
||||
|
||||
/// Smartcard detection pin
|
||||
// FIXME: add connect pin as iso pin...should it be periph b or interrupt oder input?
|
||||
#define BOARD_ISO7816_BASE_USART USART0
|
||||
#define BOARD_ISO7816_ID_USART ID_USART0
|
||||
|
||||
#define USART_SIM USART0
|
||||
#define ID_USART_SIM ID_USART0
|
||||
#define USART_PHONE USART1
|
||||
#define ID_USART_PHONE ID_USART1
|
||||
|
||||
#define SIM_PWEN PIO_PA5
|
||||
#define VCC_FWD PIO_PA26
|
||||
|
||||
|
||||
//** USB **/
|
||||
// USB pull-up control pin definition (PA16).
|
||||
// Default: 1 (USB Pullup deactivated)
|
||||
#define PIN_USB_PULLUP {1 << 16, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
|
||||
// Board has UDP controller
|
||||
#define BOARD_USB_UDP
|
||||
// D+ has external pull-up
|
||||
#define BOARD_USB_PULLUP_EXTERNAL
|
||||
|
||||
#define BOARD_USB_NUMENDPOINTS 8
|
||||
|
||||
// FIXME: in all other cases return 0?
|
||||
#define BOARD_USB_ENDPOINTS_MAXPACKETSIZE(i) (((i == 4) || (i == 5))? 512 : 64)
|
||||
#define BOARD_USB_ENDPOINTS_BANKS(i) (((i == 0) || (i == 3)) ? 1 : 2)
|
||||
|
||||
/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
|
||||
//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
|
||||
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_BUSPOWERED_NORWAKEUP
|
||||
//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_RWAKEUP
|
||||
|
||||
#endif
|
||||
@@ -1,59 +1,10 @@
|
||||
#ifndef _BOARD_
|
||||
#define _BOARD_
|
||||
|
||||
/** Headers */
|
||||
#include "chip.h"
|
||||
/* We need this for a nop instruction in USB_HAL.c */
|
||||
#define __CC_ARM
|
||||
|
||||
/** Board */
|
||||
#include "board_lowlevel.h"
|
||||
#include "uart_console.h"
|
||||
#include "iso7816_4.h"
|
||||
#include "led.h"
|
||||
#include "cciddriver.h"
|
||||
#include "usart.h"
|
||||
#include "USBD.h"
|
||||
|
||||
#include "USBD_Config.h"
|
||||
#include "USBDDriver.h"
|
||||
|
||||
/** Highlevel */
|
||||
#include "trace.h"
|
||||
#include "stdio.h"
|
||||
#include "stdlib.h"
|
||||
#include "string.h"
|
||||
#include "inttypes.h"
|
||||
|
||||
#include "simtrace.h"
|
||||
|
||||
#define MIN(a, b) ((a < b) ? a : b)
|
||||
|
||||
#ifdef __GNUC__
|
||||
#undef __GNUC__
|
||||
#endif
|
||||
#pragma once
|
||||
#include "board_common.h"
|
||||
|
||||
/** Name of the board */
|
||||
#define BOARD_NAME "SAM3S-SIMTRACE"
|
||||
/** Board definition */
|
||||
#define simtrace
|
||||
/** Family definition (already defined) */
|
||||
#define sam3s
|
||||
/** Core definition */
|
||||
#define cortexm3
|
||||
|
||||
#define BOARD_MAINOSC 18432000
|
||||
#define BOARD_MCK 48000000
|
||||
|
||||
#define LED_RED PIO_PA17
|
||||
#define LED_GREEN PIO_PA18
|
||||
|
||||
#define PIN_LED_RED {LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
#define PIN_LED_GREEN {LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
|
||||
|
||||
#define LED_NUM_RED 0
|
||||
#define LED_NUM_GREEN 1
|
||||
|
||||
/** Phone (SIM card emulator)/CCID Reader/MITM configuration **/
|
||||
/* Normally the communication lines between phone and SIM card are disconnected */
|
||||
@@ -72,44 +23,6 @@
|
||||
|
||||
#define PINS_SIM_SNIFF_SIM PIN_PHONE_IO, PIN_PHONE_CLK
|
||||
|
||||
|
||||
|
||||
/** USART0 pin RX */
|
||||
#define PIN_USART0_RXD {PIO_PA9A_URXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
/** USART0 pin TX */
|
||||
#define PIN_USART0_TXD {PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
|
||||
#define BOARD_PIN_USART_RXD PIN_USART0_RXD
|
||||
#define BOARD_PIN_USART_TXD PIN_USART0_TXD
|
||||
|
||||
#define BOARD_ID_USART ID_USART0
|
||||
#define BOARD_USART_BASE USART0
|
||||
|
||||
#define PINS_UART { PIO_PA9A_URXD0|PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
|
||||
/** UART0 */
|
||||
/** Console baudrate always using 115200. */
|
||||
#define CONSOLE_BAUDRATE 115200
|
||||
/** Usart Hw interface used by the console (UART0). */
|
||||
#define CONSOLE_USART UART0
|
||||
/** Usart Hw ID used by the console (UART0). */
|
||||
#define CONSOLE_ID ID_UART0
|
||||
/** Pins description corresponding to Rxd,Txd, (UART pins) */
|
||||
#define CONSOLE_PINS {PINS_UART}
|
||||
|
||||
/// Smartcard detection pin
|
||||
// FIXME: add connect pin as iso pin...should it be periph b or interrupt oder input?
|
||||
#define BOARD_ISO7816_BASE_USART USART0
|
||||
#define BOARD_ISO7816_ID_USART ID_USART0
|
||||
|
||||
#define USART_SIM USART0
|
||||
#define ID_USART_SIM ID_USART0
|
||||
#define USART_PHONE USART1
|
||||
#define ID_USART_PHONE ID_USART1
|
||||
|
||||
#define SIM_PWEN PIO_PA5
|
||||
#define VCC_FWD PIO_PA26
|
||||
|
||||
#define SIM_PWEN_PIN {PIO_PA5, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
|
||||
#define PWR_PINS \
|
||||
@@ -118,7 +31,6 @@
|
||||
/* Enable second power converter: VCC_PHONE to VCC_SIM; high: on */ \
|
||||
{VCC_FWD, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
|
||||
|
||||
#define SW_SIM PIO_PA8
|
||||
#define SMARTCARD_CONNECT_PIN {SW_SIM, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_DEGLITCH | PIO_IT_EDGE }
|
||||
//#define SMARTCARD_CONNECT_PIN {SW_SIM, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_EDGE}
|
||||
@@ -160,31 +72,7 @@
|
||||
/// SPI chip select 0 pin definition (PA11).
|
||||
#define PIN_SPI_NPCS0 {1 << 11, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
||||
|
||||
//** USB **/
|
||||
// USB pull-up control pin definition (PA16).
|
||||
// Default: 1 (USB Pullup deactivated)
|
||||
#define PIN_USB_PULLUP {1 << 16, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
||||
|
||||
// Board has UDP controller
|
||||
#define BOARD_USB_UDP
|
||||
// D+ has external pull-up
|
||||
#define BOARD_USB_PULLUP_EXTERNAL
|
||||
|
||||
#define BOARD_USB_NUMENDPOINTS 8
|
||||
|
||||
// FIXME: in all other cases return 0?
|
||||
#define BOARD_USB_ENDPOINTS_MAXPACKETSIZE(i) (((i == 4) || (i == 5))? 512 : 64)
|
||||
#define BOARD_USB_ENDPOINTS_BANKS(i) (((i == 0) || (i == 3)) ? 1 : 2)
|
||||
|
||||
/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
|
||||
//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
|
||||
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_BUSPOWERED_NORWAKEUP
|
||||
//#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_RWAKEUP
|
||||
|
||||
#define SIMTRACE_VENDOR_ID 0x1d50
|
||||
#define SIMTRACE_PRODUCT_ID 0x60e3
|
||||
#define USB_VENDOR_ID OPENPCD_VENDOR_ID
|
||||
#define USB_VENDOR_ID SIMTRACE_VENDOR_ID
|
||||
#define USB_PRODUCT_ID SIMTRACE_PRODUCT_ID
|
||||
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user