Christina Quast
14f6399c03
tc_etu.c: Removed, because was never used
...
Since the host side does the parsing of the packets, (not the firmware,
as it was in the old simtrace version), we do not need to check for expired
max waiting time.
Instead, every byte received from the phone is filled into a ring buffer.
As soon as the USB endpoint to the host is not busy anymore, it is sent
to the host over the respective USB endpoint.
2015-05-08 16:45:28 +02:00
Christina Quast
5f83861b17
mitm.c: Removed unused commented out code
2015-05-08 16:45:28 +02:00
Christina Quast
560ade3239
main.c: Removed TC_Start/_Stop (was commented out)
...
Removed FIXME comment
Removed TC_Start, TC_Stop function call, which was commented out anyways.
2015-05-08 16:45:28 +02:00
Christina Quast
1b65ad0329
sniffer.c: Removed unused PR macro defnition
2015-05-08 16:45:28 +02:00
Christina Quast
0bf65dc0b6
usb.c: Removed FIXME comment
...
MITM does not support two interface settings.
The comment mixed up interface configurations and alternative
interface settings.
2015-05-08 16:45:28 +02:00
Christina Quast
bfd7354c86
usb.c: removed comment, named phone interface of MITM conf
...
String descriptor #0 always is the language descriptor.
The second USB interface is in the MITM configuration is
the interface to the phone.
2015-05-08 16:00:51 +02:00
Christina Quast
4a30a3700b
Remove PR define, replace with TRACE_DEBUG
...
The define PR was introduced to switch quickly between TRACE levels
for specific debug print messages.
Now, it all became debug output, since it is not needed in normal
operation.
2015-05-08 15:34:45 +02:00
Christina Quast
9dbf1c90ac
main.c: Set green LED when USB is configured
2015-05-06 08:46:32 +02:00
Christina Quast
cb646bc729
command to change fidi send by host
2015-05-03 14:21:26 +02:00
Christina Quast
be235275fa
Added not working PTS parsing to host communication
2015-05-02 17:56:32 +02:00
Christina Quast
7a7f98c9f2
ringbuf.c: rbuf peek function
2015-05-02 17:53:13 +02:00
Christina Quast
bf12a6f79e
iso7816_uart: starting point for pts parsing
2015-05-02 13:22:07 +02:00
Christina Quast
4bec8d8e26
host_communication.c: printf becomes TRACE_DEBUG
2015-04-21 23:03:59 +02:00
Christina Quast
e4cbfe6f47
Moved ISR_PhoneRST into iso code file and simtrace header
2015-04-20 13:07:28 +02:00
Christina Quast
3d5e3ab612
simtrace_iso7816.c: Remove unused _ISO7816_Init
2015-04-20 12:20:50 +02:00
Christina Quast
4b8149363a
iso7816_4.c: CLK div differs for Master and Slave
...
Attention: Each init function has to enable and disable receiver and
transmitter on its own!
2015-04-17 18:50:25 +02:00
Christina Quast
ad215aaf66
ccid.c: removed SMARTCARD_CONNECT_PIN check (always defined)
2015-04-16 15:00:07 +02:00
Christina Quast
2379ac8e32
main.c: Removed double declaration of var i
2015-04-16 11:09:37 +02:00
Christina Quast
ec9c09e9b9
Moved global Usart state into usart struct
2015-04-16 10:45:39 +02:00
Christina Quast
911bf26a55
sniffer.c: Enable/disable interrupts in init/exit function
2015-04-13 22:39:11 +02:00
Christina Quast
d52201f6db
phone.c: Enable/disable interrupts on init/exit
2015-04-13 22:38:05 +02:00
Christina Quast
dcce4c3244
phone.c: Callback routine for reenabling RST interrupt
2015-04-13 22:20:12 +02:00
Christina Quast
de68867402
main.c: Reset board if USB not configured
2015-04-12 15:20:57 +02:00
Christina Quast
b595e7cb53
Merge branch 'new_iso_init' (sniffer not working)
...
Conflicts:
firmware/src_simtrace/phone.c
firmware/src_simtrace/simtrace.h
2015-04-12 13:31:01 +02:00
Christina Quast
2b8a18bf3a
Sniffer with ringbuf, works SOMETIMES
...
* Sniffer uses phone endpoints for communication and the ringbuffer
routines the phone communication uses
* Most times the Usart1 interrupt is not triggered, and therefore
no values are recorded
2015-04-12 09:31:36 +02:00
Christina Quast
5c6a299c71
phone.c: Sniffer bus config make switch
2015-04-11 20:03:14 +02:00
Christina Quast
611bea8b4b
tc_etu: Corrected compiler warning
2015-04-11 18:15:51 +02:00
Christina Quast
4db82e092f
ringbuffer implementation
2015-04-11 18:15:27 +02:00
Christina Quast
2ee3ec73f4
tc_etu.c: Fixed PIN initialisation compiler waring
2015-04-11 12:27:46 +02:00
Christina Quast
542f9183bb
basic ringbuffer implementation
2015-04-11 09:31:15 +02:00
Christina Quast
87ddfa8c23
phone.c: Bug fix: USB err format string interchanged
2015-04-11 08:44:40 +02:00
Christina Quast
e24b9ace89
ISO7816_Init: Initialized with USART
...
* ISO7816_Init: Takes Usart_info and CLK_SLAVE/CLK_MASTER as param
* ISO7816_SendChar, ISO7816_GetChar: Usart_info is passed
* ISO7816_Set_Reset_Pin function for CCID part
* iso7816_4.c: BOARD_ISO7816_BASE_USART replaced by USART_SIM
* Redundant _ISO7816_Init, _ISO7816_SendChar, _ISO7816_GetChar
functions removed
* All simtrace modes use iso7816_4.c functions instead of redefined
_ISO7816_xxx functions
2015-04-10 17:44:49 +02:00
Christina Quast
3eab56e079
ISO7816_Init with more parameters, slave/master clock
2015-04-10 15:38:49 +02:00
Christina Quast
95d6616ba1
Split init into configure and init
...
* Implemented configure, init, exit functions:
When a configuration is changed, interrupts for reset pins
should be disabled
* Moved variables shared between code files to simtrace.h
2015-04-09 22:38:47 +02:00
Christina Quast
bf464ae566
Moved ccid related files to bord related folders
2015-04-09 19:47:45 +02:00
Christina Quast
6b02775638
phone.c: Check return values of USB_Write
2015-04-09 19:47:27 +02:00
Christina Quast
e2dddd5885
Renamed simtrace_src to src_simtrace
2015-04-09 17:40:48 +02:00
