Use USART 0 connected to the SIM card side to sniff the communication.
The card side can also measure ETU times.
Do proper pin initialization.
This code can already capture the ATR communication between phone and card.
because the applications share the board capabilities defined in
libboard/*/include/board.h and USB configurations are enabled according
to the previously defined capabilities in libcommon/source.usb.c, all
applications actually offer the same functions.
thus creating the trace application is only mainly a cosmetic change, as the
sniffer function will also be present and enabled in the cardem application.
adc2uv is not used in boardver_adc.c.
a FIXME comment says it should be shared with mode_cardemu.c.
the exact same code is already available in mode_cardemu.c
the curent local copies of libosmocore headers + source is a temporary
hack anyway. We should instead rely on a system-wide install of
libosmocore cross-compiled for arm-none-eabi. But leave that as a
second (later) step beyond this patch.
Change-Id: Ia63fd842d45a2b404233b4326050e7eda0604cf0
This fixes the following compile error:
apps/dfu/main.c:73:3: error: 'for' loop initial declarations are only allowed in C99 or C11 mode
for (unsigned int i=0; i<len; i++) {
^
apps/dfu/main.c:73:3: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code
which was recently introduced in b73f0a00bc
Sometimes descriptor string 0xee is requested.
This is a mechanism used by Microsoft Windows to further identify the USB device.
Instead of stalling, as is the original code, leading to an USB reset, we send an empty packet.
I am not sure if sending an empty string would be better, but an empty packet seems sufficient.
During DFU download the destination start address is checked to not exceed the
RAM or flash end address, but it is also necessary to check if the end of the
data to be downloaded is also within the allowed range.
When downloading to RAM it is also necessary to check if the data to be
downloaded does not overwrite (i.e. corrupt) the stack.
fixes following warning:
libboard/common/source/board_cstartup_gnu.c:137:11: warning: assignment to 'void (*)(void)' from 'unsigned int' makes pointer from integer without a cast [-Wint-conversion]
appReset = pSrc[1];
the __attribute__ ((format (printf, 1, 0))) declaration remove the following
compilation warning:
warning: function 'osmo_panic' might be a candidate for 'gnu_printf' format
attribute [-Wsuggest-attribute=format]
osmo_panic_default(fmt, args);
The original board startup script is provided by Atmel.
It has been modified to handle application or DFU booting.
The copyright notice has been updated to reflect this change.
e.g. in CCID mode we need to treat class-specific control requests,
and we want to do this in a way how the CCID code doesn't need to
understand about DFU.
Each board can define its own conditions on which the controller should
boot into DFU mode rather than normal application mode. Let's move the
"UART loopback jumper" to QMOD specific part. For SIMtrace we have an
actual button and can use that in a future patch.
