In the function set_tpdu_state(), there is a missing transition to
WAIT_TX state. This is fine if you are coming from the WAIT_PB state,
which has already restarted the waiting timer via
card_emu_uart_update_wt(), but if you are coming from the WAIT_RX
state, then card_emu_uart_update_wt() is never called and the USART
timer is never restarted. (Because the transmitter is left enabled in
WAIT_RX, the response is still sent to the modem; it is just the
half-wait timeouts that are missing).
Change-Id: Ib4eb964c073192e8f067004625af818ba2caf003
- improves trace diagnostic output by moving cursor back over the
the rotor before a diagnostic message has a chance to be printed.
there is still a race condition, but it is much better.
Change-Id: Iad7767f2a5dbbd67b0f33b9bfc2c3864ce308990
As the bootloader goes beyond partition size in modern gcc, use clang
instead.
Depends: docker-playground Ib82a53fa7edc62d21e772efbb9b2c049d1b50c4d
Related: OS#5260
Change-Id: I2aa2e20e75e334560dbe1f6db9fd1491873ff91f
This fixes the firmware USB interface somehow getting stuck
after a USB disconnect/reconnect without power cycle.
Right now there are a number of things we only execute the first time we
reach USBD_STATE_CONFIGURED, but not at any subsequent such event.
It's also rather clear that this doesn't really show in simtrace2 as it
is bus-powered. And it doesn't show on OWHW as we don't have any USB
unplug situations of the USB between the on-board traces of USB host and
SAM3S. So this really only is relevant to QMOD.
A cheap and dirty work-around is to simply reset the entire uC every
time a USB unplug happens.
Change-Id: I6678bb2192c1419ed388b46c4ae7aa1ce18dc7ee
Related: OS#5578
osmo_apdu_segment_in() may return a negative number on receipt of
"unknown APDU case", and that would crash simtrace2-cardem-pcsc:
msgb(0x55d2cf7aa8a0): Not enough tailroom msgb_put
(allocated 920, head at 0, len 7, tailroom 1017 < want tailroom 65534)
backtrace() returned 19 addresses
Whenever osmo_apdu_segment_in() fails to recognize an APDU, the
communication is broken, because we don't know if we should continue
transmitting or receiving. Only a successful return value by would
allow us to know this. Do not crash, exit() gracefully.
Change-Id: I9e97b955a28ec886a429d744f9316e7e71be4481
Related: OS#5600
Previously, only simtrace2-sniff generated GSMTAP protocol traces.
Let's add the same functionality to simtrace2-cardem-pcsc.
Change-Id: Iba6adf41b480d127bf11ee361c66d80fe8296313
Closes: OS#5494
This change prevents contention on the ISO7816 bus by disabling the card emulation state machine when the SIM switch is in the local mode. Without this change, the card emulation firmware can clobber ISO7816 communications and cause contention with certain (but not all) SIM cards.
Changes:
- Add 'enabled' flag to cardemu instance that is set/cleared by usb_command_sim_select() (the only place where sim switch occurs).
- Flag is initialized as false (disabled) by default, to match local SIM mode default.
- When card emulation is disabled, force SIM VCC to be "OFF", SIM RESET as "not in RESET", and drop bytes bytes received on the ISO7816 interface (but do service buffers).
Change-Id: I4010f988712eac4a6af8568ccd60062f9de62449
The firmware doesn't recover from a OSMO_ASSERT() which direct reset the board.
After the reset the firmware will waits forever for the USBD state USBD_STATE_CONFIGURED.
By adding the explicit USBD_HAL_DISCONNECT the board always recovers.
Fixes: OS#5478
Related: SYS#5752
Change-Id: I600a26025166d20b6b27c191f24e4023efdaadf6
Particularly the VCC/RST/CLK changes can happen quite frequent, and
we were seeing quite a number of overflows of the usb_buf queue for EP06
(interrupt endpoint) in cardem.
I first tried increasing the maximum queue size to up to 10, but that
still didn't resolve those EP06 overflow error log messages.
Reducing the bInterval from 16 to 1 made them go away in all my
tests.
Change-Id: I5c272c31983de7201cfbd445c4484f6832d878ab
this provides an esy way to understand more without looking at the
detailed decode for each packet.
Change-Id: I0aa3d68172022907fbe8371aaca6538df0649dfe
Sometimes I get LIBUSB_TRANSFER_ERROR particularly when the USB bus
is very busy. We shouldn't terminate the program, but simply resubmit
it. That's what we have multiple transfers for...
Change-Id: I77d7bc636c21171fcff7e70e87c0109cbaee9b51
We initialize a local variable to -1, and if the user specifies
no address from the command line, we use this in the interface match
struct, which uses a uint8_t. This means 255 ends up in there, and
as a result no usb interface ever matches unless the user explicitly
specifies the -A command line argument.
With this patch any absent -A argument will result in ifm.addr == 0,
which means "don't match on address", and which is what we want here.
Change-Id: Iffb5fa406ddef00c7c15570ffca2c109b98d7a2d
In some readers (at least CardMan 3121), the simtrace2-cardem firmware
claims there are power-up sequences where RESET is released before VCC
becomes active. Let's detect such spec-incompliant power-up sequences
and use them to trigger a cold reset of the card.
Change-Id: I682ac3d0c2b98749a6ed44f9a73e4b39354a4284
Closes: OS#5421
* drop log statements that are already in libosmo-simtrace2
* don't printf directly, but go via LOGCI
* make LOGCI use libosmocore logging
* configure libosmocore logging in a 'convenient' way
Change-Id: I6fa0da966e6d8e723c187404c17e90cfb3f3dd9f
This avoids related ASSERTs or error messages in case any of the
libosmocore / libosmousb API functions internally tries to log
something.
Change-Id: I611c435516856c5c8928d7810fd9a9b831adc199
the ISO7816 UARTs have highest priority, while console has lowest.
remaining sources (USB, ADC, GPIO) are in between.
Change-Id: Ie6c97d61d8da3990b6e44144f36cb6d37d194307
This is what we do in all other functions, not sure why this one
wants to silently ignore any such programming errors.
Change-Id: I022eee86a5a3b5077abe59897161578ed960f1b1
The SIMtrace2 protocol alwasy contained a field for the VCC voltage,
the cardem firmware just never populated that field, even on those
boards that use the ADC to determine its voltage.
Change-Id: Idcecad553fb36380e916378e1420488acbbfa8e3
this is redundant. We care about *which* message type, and not about
wasting horizontal screen real-estate.
Change-Id: I98f90561b39401f1c2339f79a3cb40574bb03b2d
This can lead to some fields not properly zero-initialized, fooling
our matching code into the application having requested certain
fields to match ('0' is usually assumed to be unspecified).
Change-Id: I304d55b584e37d9dccb75b24057bb682f799beb2
Add new board.h definition BOARD_MAINOSC_BYPASS to configure the clock module to use an external oscillator rather than a crystal. The qmod board is one such board.
Change-Id: If62f55cd4c8b0cf758534f09d25a9bcb028814a7
Add a new command to request that the simtrace2 firmware manipulate the
card detect signal, causing the downstream cellular modem to believe
that the SIM card has been inserted or removed, respectfully.
Change-Id: I8c79eb29379a789d9d0d21495e30d66ddbdfb022
DFU flashing of apps sometimes aborts, and although rare this leads to
broken devices if no boot button or serial/jtag access exists, because
the bootloader will keep trying to start a half-flashed app that then
crashes at some point.
The easiest fix that works with existing bootloaders is to prepend a
small 512 byte stub that calculcates the crc and compares it with the
crc calculated at build time, and then either starts the actual app, or
sets the dfu flag and resets. This ensures we either have a working,
running app, or end up in the bootloader, ready to flash again.
For obvious reasons this only applies to dfu apps, and not to flash
targets like the actual bootloader itself.
Change-Id: Id6df0486c8b779889d21800dc2441b3aa9af8a5f
Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.
Change-Id: Ie0a3b2273383adbb3303faffd6ff96be7f4cae99
Apply various improvements from Martin Hauke, thanks!
* Put sover into a variable
* Sync BuildRequires with configure.ac
* Update libosmo-simtrace2 summary
* Use %make_build instead of make %{?_smp_mflags}
Change-Id: I35ce3865702f72365b38b0eaa8b28f332dabcd1f
Adjust the soname in the rpm recipe too, to fix:
error: File not found: /home/abuild/rpmbuild/BUILDROOT/simtrace2-0.8.0.202112100026-1.1.x86_64/usr/lib64/libosmo-simtrace2.so.0*
Change-Id: I748f44409ac736abbd5c18e31ae02d025dee2c77
