Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.
Change-Id: Ie0a3b2273383adbb3303faffd6ff96be7f4cae99
Fi/Di are not the index into the table, but the contents of the table
as resolved by Fi_index / Di_index. Let's clarify the terminology.
Change-Id: If364e08e7c9a3a9707e6d54b9267c6a7c088e415
This is a purely cosmetic change in terms of coding style, but it
fixes an [invalid] detection for unterminated value_string arrays
by our verify_value_string_arrays_are_terminated.py script:
Change-Id: I2f2370a673074f6bf5380106b6254b4aa1e8a792
ERROR: file contains unterminated value_string 'struct value_string iso7816_3_card_state_names[]': './deps/simtrace2/firmware/libcommon/source/card_emu.c'
ERROR: file contains unterminated value_string 'struct value_string tpdu_state_names[]': './deps/simtrace2/firmware/libcommon/source/card_emu.c'
There have been tons of format-string related bugs in our code which
we never discovered due to disabling -Wformat. Let's fix that.
Change-Id: I5ec466361bcc526fac1f4897673264ee5af3458b
When the host does not retrieved the USB messages, they keep getting
queue in the firmware, filling the RAM, and preventing further memory
to be allocated.
Change-Id: I0e447acdf757dcb5dc5c4d8b84a4235866914cad
linker warning:
obj/simtrace/dfu_sniffer.o: In function `usb_send_data':
/media/data/work/simtrace2/simtrace2/firmware/libcommon/source/sniffer.c:338: warning: undefined reference to `putchar'
Change-Id: I934f3fcb474d4046e921511a024c3a0b8533c782
The red and green LEDs are now used as follows:
- red on = power (firmware is running)
- red blink = error detected (e.g. during ISO-7816 parsing)
- green on = running (sniffer mode is running)
- green blink = activity (e.g. USB message sent)
Change-Id: Ib1b6ff87fb92d6ed3ecae4bc89386206aaab508e
when the host software does not retrieve the USB messages the memory
is filled and no new USB messages can be allocated, preventing the
following code to print the message
Change-Id: Ie8946894a84cb853b45555f7abb1ca6f32111425
the waiting time (WT) is used to detect timeouts (e.g. for
unresponsive card or just to signal an error/NAK). it is essential
to detect to timeout to end current data transfer (e.g. change state).
by default (after a reset) to timeout is 9600 ETU, but this can change
at two places:
- after the ATR using the value of TC2 (if present)
- after a PPS (only F is used, and not D)
because the timeout value can be larger than the 16-bit of the USART
TO register, an external variable needs to be used for the count down.
Change-Id: I9735660ffce161cec8d4e63fa60a66fc8ef57525
Handling the USB message queue is done in an ISR and take quite some time.
This can cause a USART/SIM sniffing buffer overrun, resulting in data loss.
By setting the USB IRQ lower than the USART IRQ, the USB ISR can be
interrupted (for short) and no data gets lost.
Change-Id: I870a0aa8e251bbb53249c54bfcaa45de5b5a9486
Use USART 0 connected to the SIM card side to sniff the communication.
The card side can also measure ETU times.
Do proper pin initialization.
This code can already capture the ATR communication between phone and card.
Change-Id: I0597ec723cb2225540c89c3821b91d8a45adfcd6
