the LEDs (2 of them) were connected to the same pins on all
boards, up to the octsim-tester.
to be able to have board specific LEDs the definitions have moved
from common to the each board.
at the same time I added a bit of documentation what the LEDs are
used for.
Change-Id: I3226a9187a8d0b657ccf5dcd8f3586b2578f96d2
UART baud rate is main clock (MCK) divided by CR*16.
The MCK values are chosen >= 48 MHz and <= 64 MHz to have a near
integer value CR for a baud rate of 921600 bps.
The end MCK frequency between simtrace and qmod differ slightly
but are close to 58 MHz.
Change-Id: Iaa4a97fc68494c93b9d128503515d88049de506c
This way we can easily check with 'diff' for differences in our code and
Atmel softpack. Also, this layout is more suitable for building various
different firmware images (e.g. factory-test, dfu-loader, main
application) for a variety of different boards (simtrace, owhw, qmod).
