WIP: firmware: sniffer: inbound USB handling

Change-Id: Ic953148600d82285281abcb573a07e2e9b8082a7

.clang-format

@@ -1,563 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# clang-format configuration file. Intended for clang-format >= 4.
-#
-# For more information, see:
-#
-#   Documentation/process/clang-format.rst
-#   https://clang.llvm.org/docs/ClangFormat.html
-#   https://clang.llvm.org/docs/ClangFormatStyleOptions.html
-#
----
-AccessModifierOffset: -4
-AlignAfterOpenBracket: Align
-AlignConsecutiveAssignments: false
-AlignConsecutiveDeclarations: false
-#AlignEscapedNewlines: Left # Unknown to clang-format-4.0
-AlignOperands: true
-AlignTrailingComments: false
-AllowAllParametersOfDeclarationOnNextLine: false
-AllowShortBlocksOnASingleLine: false
-AllowShortCaseLabelsOnASingleLine: false
-AllowShortFunctionsOnASingleLine: None
-AllowShortIfStatementsOnASingleLine: false
-AllowShortLoopsOnASingleLine: false
-AlwaysBreakAfterDefinitionReturnType: None
-AlwaysBreakAfterReturnType: None
-AlwaysBreakBeforeMultilineStrings: false
-AlwaysBreakTemplateDeclarations: false
-BinPackArguments: true
-BinPackParameters: true
-BraceWrapping:
-  AfterClass: false
-  AfterControlStatement: false
-  AfterEnum: false
-  AfterFunction: true
-  AfterNamespace: true
-  AfterObjCDeclaration: false
-  AfterStruct: false
-  AfterUnion: false
-  #AfterExternBlock: false # Unknown to clang-format-5.0
-  BeforeCatch: false
-  BeforeElse: false
-  IndentBraces: false
-  #SplitEmptyFunction: true # Unknown to clang-format-4.0
-  #SplitEmptyRecord: true # Unknown to clang-format-4.0
-  #SplitEmptyNamespace: true # Unknown to clang-format-4.0
-BreakBeforeBinaryOperators: None
-BreakBeforeBraces: Custom
-#BreakBeforeInheritanceComma: false # Unknown to clang-format-4.0
-BreakBeforeTernaryOperators: false
-BreakConstructorInitializersBeforeComma: false
-#BreakConstructorInitializers: BeforeComma # Unknown to clang-format-4.0
-BreakAfterJavaFieldAnnotations: false
-BreakStringLiterals: false
-ColumnLimit: 120
-CommentPragmas: '^ IWYU pragma:'
-#CompactNamespaces: false # Unknown to clang-format-4.0
-ConstructorInitializerAllOnOneLineOrOnePerLine: false
-ConstructorInitializerIndentWidth: 8
-ContinuationIndentWidth: 8
-Cpp11BracedListStyle: false
-DerivePointerAlignment: false
-DisableFormat: false
-ExperimentalAutoDetectBinPacking: false
-#FixNamespaceComments: false # Unknown to clang-format-4.0
-
-# Taken from:
-#   git grep -h '^#define [^[:space:]]*for_each[^[:space:]]*(' include/ \
-#   | sed "s,^#define \([^[:space:]]*for_each[^[:space:]]*\)(.*$,  - '\1'," \
-#   | sort | uniq
-ForEachMacros:
-  - 'apei_estatus_for_each_section'
-  - 'ata_for_each_dev'
-  - 'ata_for_each_link'
-  - '__ata_qc_for_each'
-  - 'ata_qc_for_each'
-  - 'ata_qc_for_each_raw'
-  - 'ata_qc_for_each_with_internal'
-  - 'ax25_for_each'
-  - 'ax25_uid_for_each'
-  - '__bio_for_each_bvec'
-  - 'bio_for_each_bvec'
-  - 'bio_for_each_bvec_all'
-  - 'bio_for_each_integrity_vec'
-  - '__bio_for_each_segment'
-  - 'bio_for_each_segment'
-  - 'bio_for_each_segment_all'
-  - 'bio_list_for_each'
-  - 'bip_for_each_vec'
-  - 'bitmap_for_each_clear_region'
-  - 'bitmap_for_each_set_region'
-  - 'blkg_for_each_descendant_post'
-  - 'blkg_for_each_descendant_pre'
-  - 'blk_queue_for_each_rl'
-  - 'bond_for_each_slave'
-  - 'bond_for_each_slave_rcu'
-  - 'bpf_for_each_spilled_reg'
-  - 'btree_for_each_safe128'
-  - 'btree_for_each_safe32'
-  - 'btree_for_each_safe64'
-  - 'btree_for_each_safel'
-  - 'card_for_each_dev'
-  - 'cgroup_taskset_for_each'
-  - 'cgroup_taskset_for_each_leader'
-  - 'cpufreq_for_each_entry'
-  - 'cpufreq_for_each_entry_idx'
-  - 'cpufreq_for_each_valid_entry'
-  - 'cpufreq_for_each_valid_entry_idx'
-  - 'css_for_each_child'
-  - 'css_for_each_descendant_post'
-  - 'css_for_each_descendant_pre'
-  - 'device_for_each_child_node'
-  - 'displayid_iter_for_each'
-  - 'dma_fence_chain_for_each'
-  - 'do_for_each_ftrace_op'
-  - 'drm_atomic_crtc_for_each_plane'
-  - 'drm_atomic_crtc_state_for_each_plane'
-  - 'drm_atomic_crtc_state_for_each_plane_state'
-  - 'drm_atomic_for_each_plane_damage'
-  - 'drm_client_for_each_connector_iter'
-  - 'drm_client_for_each_modeset'
-  - 'drm_connector_for_each_possible_encoder'
-  - 'drm_for_each_bridge_in_chain'
-  - 'drm_for_each_connector_iter'
-  - 'drm_for_each_crtc'
-  - 'drm_for_each_crtc_reverse'
-  - 'drm_for_each_encoder'
-  - 'drm_for_each_encoder_mask'
-  - 'drm_for_each_fb'
-  - 'drm_for_each_legacy_plane'
-  - 'drm_for_each_plane'
-  - 'drm_for_each_plane_mask'
-  - 'drm_for_each_privobj'
-  - 'drm_mm_for_each_hole'
-  - 'drm_mm_for_each_node'
-  - 'drm_mm_for_each_node_in_range'
-  - 'drm_mm_for_each_node_safe'
-  - 'flow_action_for_each'
-  - 'for_each_acpi_dev_match'
-  - 'for_each_active_dev_scope'
-  - 'for_each_active_drhd_unit'
-  - 'for_each_active_iommu'
-  - 'for_each_aggr_pgid'
-  - 'for_each_available_child_of_node'
-  - 'for_each_bio'
-  - 'for_each_board_func_rsrc'
-  - 'for_each_bvec'
-  - 'for_each_card_auxs'
-  - 'for_each_card_auxs_safe'
-  - 'for_each_card_components'
-  - 'for_each_card_dapms'
-  - 'for_each_card_pre_auxs'
-  - 'for_each_card_prelinks'
-  - 'for_each_card_rtds'
-  - 'for_each_card_rtds_safe'
-  - 'for_each_card_widgets'
-  - 'for_each_card_widgets_safe'
-  - 'for_each_cgroup_storage_type'
-  - 'for_each_child_of_node'
-  - 'for_each_clear_bit'
-  - 'for_each_clear_bit_from'
-  - 'for_each_cmsghdr'
-  - 'for_each_compatible_node'
-  - 'for_each_component_dais'
-  - 'for_each_component_dais_safe'
-  - 'for_each_comp_order'
-  - 'for_each_console'
-  - 'for_each_cpu'
-  - 'for_each_cpu_and'
-  - 'for_each_cpu_not'
-  - 'for_each_cpu_wrap'
-  - 'for_each_dapm_widgets'
-  - 'for_each_dev_addr'
-  - 'for_each_dev_scope'
-  - 'for_each_dma_cap_mask'
-  - 'for_each_dpcm_be'
-  - 'for_each_dpcm_be_rollback'
-  - 'for_each_dpcm_be_safe'
-  - 'for_each_dpcm_fe'
-  - 'for_each_drhd_unit'
-  - 'for_each_dss_dev'
-  - 'for_each_dtpm_table'
-  - 'for_each_efi_memory_desc'
-  - 'for_each_efi_memory_desc_in_map'
-  - 'for_each_element'
-  - 'for_each_element_extid'
-  - 'for_each_element_id'
-  - 'for_each_endpoint_of_node'
-  - 'for_each_evictable_lru'
-  - 'for_each_fib6_node_rt_rcu'
-  - 'for_each_fib6_walker_rt'
-  - 'for_each_free_mem_pfn_range_in_zone'
-  - 'for_each_free_mem_pfn_range_in_zone_from'
-  - 'for_each_free_mem_range'
-  - 'for_each_free_mem_range_reverse'
-  - 'for_each_func_rsrc'
-  - 'for_each_hstate'
-  - 'for_each_if'
-  - 'for_each_iommu'
-  - 'for_each_ip_tunnel_rcu'
-  - 'for_each_irq_nr'
-  - 'for_each_link_codecs'
-  - 'for_each_link_cpus'
-  - 'for_each_link_platforms'
-  - 'for_each_lru'
-  - 'for_each_matching_node'
-  - 'for_each_matching_node_and_match'
-  - 'for_each_member'
-  - 'for_each_memcg_cache_index'
-  - 'for_each_mem_pfn_range'
-  - '__for_each_mem_range'
-  - 'for_each_mem_range'
-  - '__for_each_mem_range_rev'
-  - 'for_each_mem_range_rev'
-  - 'for_each_mem_region'
-  - 'for_each_migratetype_order'
-  - 'for_each_msi_entry'
-  - 'for_each_msi_entry_safe'
-  - 'for_each_msi_vector'
-  - 'for_each_net'
-  - 'for_each_net_continue_reverse'
-  - 'for_each_netdev'
-  - 'for_each_netdev_continue'
-  - 'for_each_netdev_continue_rcu'
-  - 'for_each_netdev_continue_reverse'
-  - 'for_each_netdev_feature'
-  - 'for_each_netdev_in_bond_rcu'
-  - 'for_each_netdev_rcu'
-  - 'for_each_netdev_reverse'
-  - 'for_each_netdev_safe'
-  - 'for_each_net_rcu'
-  - 'for_each_new_connector_in_state'
-  - 'for_each_new_crtc_in_state'
-  - 'for_each_new_mst_mgr_in_state'
-  - 'for_each_new_plane_in_state'
-  - 'for_each_new_private_obj_in_state'
-  - 'for_each_node'
-  - 'for_each_node_by_name'
-  - 'for_each_node_by_type'
-  - 'for_each_node_mask'
-  - 'for_each_node_state'
-  - 'for_each_node_with_cpus'
-  - 'for_each_node_with_property'
-  - 'for_each_nonreserved_multicast_dest_pgid'
-  - 'for_each_of_allnodes'
-  - 'for_each_of_allnodes_from'
-  - 'for_each_of_cpu_node'
-  - 'for_each_of_pci_range'
-  - 'for_each_old_connector_in_state'
-  - 'for_each_old_crtc_in_state'
-  - 'for_each_old_mst_mgr_in_state'
-  - 'for_each_oldnew_connector_in_state'
-  - 'for_each_oldnew_crtc_in_state'
-  - 'for_each_oldnew_mst_mgr_in_state'
-  - 'for_each_oldnew_plane_in_state'
-  - 'for_each_oldnew_plane_in_state_reverse'
-  - 'for_each_oldnew_private_obj_in_state'
-  - 'for_each_old_plane_in_state'
-  - 'for_each_old_private_obj_in_state'
-  - 'for_each_online_cpu'
-  - 'for_each_online_node'
-  - 'for_each_online_pgdat'
-  - 'for_each_pci_bridge'
-  - 'for_each_pci_dev'
-  - 'for_each_pci_msi_entry'
-  - 'for_each_pcm_streams'
-  - 'for_each_physmem_range'
-  - 'for_each_populated_zone'
-  - 'for_each_possible_cpu'
-  - 'for_each_present_cpu'
-  - 'for_each_prime_number'
-  - 'for_each_prime_number_from'
-  - 'for_each_process'
-  - 'for_each_process_thread'
-  - 'for_each_prop_codec_conf'
-  - 'for_each_prop_dai_codec'
-  - 'for_each_prop_dai_cpu'
-  - 'for_each_prop_dlc_codecs'
-  - 'for_each_prop_dlc_cpus'
-  - 'for_each_prop_dlc_platforms'
-  - 'for_each_property_of_node'
-  - 'for_each_registered_fb'
-  - 'for_each_requested_gpio'
-  - 'for_each_requested_gpio_in_range'
-  - 'for_each_reserved_mem_range'
-  - 'for_each_reserved_mem_region'
-  - 'for_each_rtd_codec_dais'
-  - 'for_each_rtd_components'
-  - 'for_each_rtd_cpu_dais'
-  - 'for_each_rtd_dais'
-  - 'for_each_set_bit'
-  - 'for_each_set_bit_from'
-  - 'for_each_set_clump8'
-  - 'for_each_sg'
-  - 'for_each_sg_dma_page'
-  - 'for_each_sg_page'
-  - 'for_each_sgtable_dma_page'
-  - 'for_each_sgtable_dma_sg'
-  - 'for_each_sgtable_page'
-  - 'for_each_sgtable_sg'
-  - 'for_each_sibling_event'
-  - 'for_each_subelement'
-  - 'for_each_subelement_extid'
-  - 'for_each_subelement_id'
-  - '__for_each_thread'
-  - 'for_each_thread'
-  - 'for_each_unicast_dest_pgid'
-  - 'for_each_vsi'
-  - 'for_each_wakeup_source'
-  - 'for_each_zone'
-  - 'for_each_zone_zonelist'
-  - 'for_each_zone_zonelist_nodemask'
-  - 'fwnode_for_each_available_child_node'
-  - 'fwnode_for_each_child_node'
-  - 'fwnode_graph_for_each_endpoint'
-  - 'gadget_for_each_ep'
-  - 'genradix_for_each'
-  - 'genradix_for_each_from'
-  - 'hash_for_each'
-  - 'hash_for_each_possible'
-  - 'hash_for_each_possible_rcu'
-  - 'hash_for_each_possible_rcu_notrace'
-  - 'hash_for_each_possible_safe'
-  - 'hash_for_each_rcu'
-  - 'hash_for_each_safe'
-  - 'hctx_for_each_ctx'
-  - 'hlist_bl_for_each_entry'
-  - 'hlist_bl_for_each_entry_rcu'
-  - 'hlist_bl_for_each_entry_safe'
-  - 'hlist_for_each'
-  - 'hlist_for_each_entry'
-  - 'hlist_for_each_entry_continue'
-  - 'hlist_for_each_entry_continue_rcu'
-  - 'hlist_for_each_entry_continue_rcu_bh'
-  - 'hlist_for_each_entry_from'
-  - 'hlist_for_each_entry_from_rcu'
-  - 'hlist_for_each_entry_rcu'
-  - 'hlist_for_each_entry_rcu_bh'
-  - 'hlist_for_each_entry_rcu_notrace'
-  - 'hlist_for_each_entry_safe'
-  - 'hlist_for_each_entry_srcu'
-  - '__hlist_for_each_rcu'
-  - 'hlist_for_each_safe'
-  - 'hlist_nulls_for_each_entry'
-  - 'hlist_nulls_for_each_entry_from'
-  - 'hlist_nulls_for_each_entry_rcu'
-  - 'hlist_nulls_for_each_entry_safe'
-  - 'i3c_bus_for_each_i2cdev'
-  - 'i3c_bus_for_each_i3cdev'
-  - 'ide_host_for_each_port'
-  - 'ide_port_for_each_dev'
-  - 'ide_port_for_each_present_dev'
-  - 'idr_for_each_entry'
-  - 'idr_for_each_entry_continue'
-  - 'idr_for_each_entry_continue_ul'
-  - 'idr_for_each_entry_ul'
-  - 'in_dev_for_each_ifa_rcu'
-  - 'in_dev_for_each_ifa_rtnl'
-  - 'inet_bind_bucket_for_each'
-  - 'inet_lhash2_for_each_icsk_rcu'
-  - 'key_for_each'
-  - 'key_for_each_safe'
-  - 'klp_for_each_func'
-  - 'klp_for_each_func_safe'
-  - 'klp_for_each_func_static'
-  - 'klp_for_each_object'
-  - 'klp_for_each_object_safe'
-  - 'klp_for_each_object_static'
-  - 'kunit_suite_for_each_test_case'
-  - 'kvm_for_each_memslot'
-  - 'kvm_for_each_vcpu'
-  - 'list_for_each'
-  - 'list_for_each_codec'
-  - 'list_for_each_codec_safe'
-  - 'list_for_each_continue'
-  - 'list_for_each_entry'
-  - 'list_for_each_entry_continue'
-  - 'list_for_each_entry_continue_rcu'
-  - 'list_for_each_entry_continue_reverse'
-  - 'list_for_each_entry_from'
-  - 'list_for_each_entry_from_rcu'
-  - 'list_for_each_entry_from_reverse'
-  - 'list_for_each_entry_lockless'
-  - 'list_for_each_entry_rcu'
-  - 'list_for_each_entry_reverse'
-  - 'list_for_each_entry_safe'
-  - 'list_for_each_entry_safe_continue'
-  - 'list_for_each_entry_safe_from'
-  - 'list_for_each_entry_safe_reverse'
-  - 'list_for_each_entry_srcu'
-  - 'list_for_each_prev'
-  - 'list_for_each_prev_safe'
-  - 'list_for_each_safe'
-  - 'llist_for_each'
-  - 'llist_for_each_entry'
-  - 'llist_for_each_entry_safe'
-  - 'llist_for_each_safe'
-  - 'mci_for_each_dimm'
-  - 'media_device_for_each_entity'
-  - 'media_device_for_each_intf'
-  - 'media_device_for_each_link'
-  - 'media_device_for_each_pad'
-  - 'nanddev_io_for_each_page'
-  - 'netdev_for_each_lower_dev'
-  - 'netdev_for_each_lower_private'
-  - 'netdev_for_each_lower_private_rcu'
-  - 'netdev_for_each_mc_addr'
-  - 'netdev_for_each_uc_addr'
-  - 'netdev_for_each_upper_dev_rcu'
-  - 'netdev_hw_addr_list_for_each'
-  - 'nft_rule_for_each_expr'
-  - 'nla_for_each_attr'
-  - 'nla_for_each_nested'
-  - 'nlmsg_for_each_attr'
-  - 'nlmsg_for_each_msg'
-  - 'nr_neigh_for_each'
-  - 'nr_neigh_for_each_safe'
-  - 'nr_node_for_each'
-  - 'nr_node_for_each_safe'
-  - 'of_for_each_phandle'
-  - 'of_property_for_each_string'
-  - 'of_property_for_each_u32'
-  - 'pci_bus_for_each_resource'
-  - 'pcl_for_each_chunk'
-  - 'pcl_for_each_segment'
-  - 'pcm_for_each_format'
-  - 'ping_portaddr_for_each_entry'
-  - 'plist_for_each'
-  - 'plist_for_each_continue'
-  - 'plist_for_each_entry'
-  - 'plist_for_each_entry_continue'
-  - 'plist_for_each_entry_safe'
-  - 'plist_for_each_safe'
-  - 'pnp_for_each_card'
-  - 'pnp_for_each_dev'
-  - 'protocol_for_each_card'
-  - 'protocol_for_each_dev'
-  - 'queue_for_each_hw_ctx'
-  - 'radix_tree_for_each_slot'
-  - 'radix_tree_for_each_tagged'
-  - 'rb_for_each'
-  - 'rbtree_postorder_for_each_entry_safe'
-  - 'rdma_for_each_block'
-  - 'rdma_for_each_port'
-  - 'rdma_umem_for_each_dma_block'
-  - 'resource_list_for_each_entry'
-  - 'resource_list_for_each_entry_safe'
-  - 'rhl_for_each_entry_rcu'
-  - 'rhl_for_each_rcu'
-  - 'rht_for_each'
-  - 'rht_for_each_entry'
-  - 'rht_for_each_entry_from'
-  - 'rht_for_each_entry_rcu'
-  - 'rht_for_each_entry_rcu_from'
-  - 'rht_for_each_entry_safe'
-  - 'rht_for_each_from'
-  - 'rht_for_each_rcu'
-  - 'rht_for_each_rcu_from'
-  - '__rq_for_each_bio'
-  - 'rq_for_each_bvec'
-  - 'rq_for_each_segment'
-  - 'scsi_for_each_prot_sg'
-  - 'scsi_for_each_sg'
-  - 'sctp_for_each_hentry'
-  - 'sctp_skb_for_each'
-  - 'shdma_for_each_chan'
-  - '__shost_for_each_device'
-  - 'shost_for_each_device'
-  - 'sk_for_each'
-  - 'sk_for_each_bound'
-  - 'sk_for_each_entry_offset_rcu'
-  - 'sk_for_each_from'
-  - 'sk_for_each_rcu'
-  - 'sk_for_each_safe'
-  - 'sk_nulls_for_each'
-  - 'sk_nulls_for_each_from'
-  - 'sk_nulls_for_each_rcu'
-  - 'snd_array_for_each'
-  - 'snd_pcm_group_for_each_entry'
-  - 'snd_soc_dapm_widget_for_each_path'
-  - 'snd_soc_dapm_widget_for_each_path_safe'
-  - 'snd_soc_dapm_widget_for_each_sink_path'
-  - 'snd_soc_dapm_widget_for_each_source_path'
-  - 'tb_property_for_each'
-  - 'tcf_exts_for_each_action'
-  - 'udp_portaddr_for_each_entry'
-  - 'udp_portaddr_for_each_entry_rcu'
-  - 'usb_hub_for_each_child'
-  - 'v4l2_device_for_each_subdev'
-  - 'v4l2_m2m_for_each_dst_buf'
-  - 'v4l2_m2m_for_each_dst_buf_safe'
-  - 'v4l2_m2m_for_each_src_buf'
-  - 'v4l2_m2m_for_each_src_buf_safe'
-  - 'virtio_device_for_each_vq'
-  - 'while_for_each_ftrace_op'
-  - 'xa_for_each'
-  - 'xa_for_each_marked'
-  - 'xa_for_each_range'
-  - 'xa_for_each_start'
-  - 'xas_for_each'
-  - 'xas_for_each_conflict'
-  - 'xas_for_each_marked'
-  - 'xbc_array_for_each_value'
-  - 'xbc_for_each_key_value'
-  - 'xbc_node_for_each_array_value'
-  - 'xbc_node_for_each_child'
-  - 'xbc_node_for_each_key_value'
-  - 'zorro_for_each_dev'
-  - 'for_each_line'
-  - 'for_each_non_empty_line'
-
-#IncludeBlocks: Preserve # Unknown to clang-format-5.0
-IncludeCategories:
-  - Regex: '.*'
-    Priority: 1
-IncludeIsMainRegex: '(Test)?$'
-IndentCaseLabels: false
-#IndentPPDirectives: None # Unknown to clang-format-5.0
-IndentWidth: 8
-IndentWrappedFunctionNames: false
-JavaScriptQuotes: Leave
-JavaScriptWrapImports: true
-KeepEmptyLinesAtTheStartOfBlocks: false
-MacroBlockBegin: ''
-MacroBlockEnd: ''
-MaxEmptyLinesToKeep: 1
-NamespaceIndentation: None
-#ObjCBinPackProtocolList: Auto # Unknown to clang-format-5.0
-ObjCBlockIndentWidth: 8
-ObjCSpaceAfterProperty: true
-ObjCSpaceBeforeProtocolList: true
-
-# Taken from git's rules
-#PenaltyBreakAssignment: 10 # Unknown to clang-format-4.0
-PenaltyBreakBeforeFirstCallParameter: 30
-PenaltyBreakComment: 10
-PenaltyBreakFirstLessLess: 0
-PenaltyBreakString: 10
-PenaltyExcessCharacter: 100
-PenaltyReturnTypeOnItsOwnLine: 60
-
-PointerAlignment: Right
-ReflowComments: false
-SortIncludes: false
-#SortUsingDeclarations: false # Unknown to clang-format-4.0
-SpaceAfterCStyleCast: false
-SpaceAfterTemplateKeyword: true
-SpaceBeforeAssignmentOperators: true
-#SpaceBeforeCtorInitializerColon: true # Unknown to clang-format-5.0
-#SpaceBeforeInheritanceColon: true # Unknown to clang-format-5.0
-SpaceBeforeParens: ControlStatements
-#SpaceBeforeRangeBasedForLoopColon: true # Unknown to clang-format-5.0
-SpaceInEmptyParentheses: false
-SpacesBeforeTrailingComments: 1
-SpacesInAngles: false
-SpacesInContainerLiterals: false
-SpacesInCStyleCastParentheses: false
-SpacesInParentheses: false
-SpacesInSquareBrackets: false
-Standard: Cpp03
-TabWidth: 8
-UseTab: Always
-...

.gitignore

@@ -18,8 +18,7 @@ tags
 *.bin
 *.p
 host/simtrace2-list
-host/simtrace2-cardem-pcsc
-host/contrib/simtrace2.spec
+host/simtrace2-remsim
+host/simtrace2-remsim-usb2udp
 usb_strings_generated.h
 firmware/usbstring/usbstring
-firmware/apps/*/usb_strings.txt.patched

.gitreview

@@ -1,3 +0,0 @@
-[gerrit]
-host=gerrit.osmocom.org
-project=simtrace2

Makefile

@@ -8,23 +8,13 @@ fw-$(1)-$(2)-clean:
 endef
 
 $(eval $(call RULES,simtrace,dfu))
-$(eval $(call RULES,simtrace,blupdate))
 $(eval $(call RULES,simtrace,trace))
 $(eval $(call RULES,simtrace,cardem))
 $(eval $(call RULES,qmod,dfu))
-$(eval $(call RULES,qmod,blupdate))
 $(eval $(call RULES,qmod,cardem))
-$(eval $(call RULES,ngff_cardem,dfu))
-$(eval $(call RULES,ngff_cardem,blupdate))
-$(eval $(call RULES,ngff_cardem,trace))
-$(eval $(call RULES,ngff_cardem,cardem))
 
-fw-clean: fw-simtrace-dfu-clean fw-simtrace-blupdate-clean fw-simtrace-trace-clean fw-simtrace-cardem-clean \
-	fw-qmod-dfu-clean fw-qmod-blupdate-clean fw-qmod-cardem-clean \
-	fw-ngff_cardem-dfu-clean fw-ngff_cardem-blupdate-clean fw-ngff_cardem-trace-clean fw-ngff_cardem-cardem-clean
-fw: fw-simtrace-dfu fw-simtrace-blupdate fw-simtrace-trace fw-simtrace-cardem \
-	fw-qmod-dfu fw-qmod-blupdate fw-qmod-cardem \
-	fw-ngff_cardem-dfu fw-ngff_cardem-blupdate fw-ngff_cardem-trace fw-ngff_cardem-cardem
+fw-clean: fw-simtrace-dfu-clean fw-simtrace-trace-clean fw-simtrace-cardem-clean fw-qmod-dfu-clean fw-qmod-cardem-clean
+fw: fw-simtrace-dfu fw-simtrace-trace fw-simtrace-cardem fw-qmod-dfu fw-qmod-cardem
 
 utils:
 	(cd host && \

README.md

@@ -5,6 +5,9 @@ This is the repository for the next-generation SIMtrace devices,
 providing abilities to trace the communication between (U)SIM card and
 phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.
 
+This is under heavy development, and right now it is not surprising if
+things still break on a daily basis.
+
 NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware
 or its associated firmware.  SIMtrace v1.x is based on a different CPU /
 microcontroller architecture and uses a completely different software
@@ -13,6 +16,12 @@ stack and host software.
 Supported Hardware
 ------------------
 
+At this point, the primary development target is still the OWHW + sysmoQMOD
+device, but we expect to add support for a SAM3 based SIMtrace hardware
+board soon.
+
+The goal is to support the following devices:
+
 * Osmocom SIMtrace 1.x with SAM3 controller
 ** this is open hardware and schematics / PCB design is published
 * sysmocom sysmoQMOD (with 4 Modems,  4 SIM slots and 2 SAM3)
@@ -28,11 +37,3 @@ This repository contains several directory
 * firmware - the firmware to run on the actual devices
 * hardware - some information related to the hardware
 * host - Programs to use on the USB host to interface with the hardware
-
-
-The host software includes
-
-* libosmo-simtrace2 - a shared library to talk to devices running the simtrace2 firmware
-* simtrace2-list - list any USB-attached devices running simtrace2 firmware
-* simtrace2-sniff - interface the 'trace' firmware to obtain card protocol traces
-* simtrace2-cardem-pcsc - interface the 'cardem' fimrware to use a SIM in a PC/SC reader

TODO-RELEASE

@@ -1,10 +0,0 @@
-# When cleaning up this file: bump API version in corresponding Makefile.am and rename corresponding debian/lib*.install
-# according to https://osmocom.org/projects/cellular-infrastructure/wiki/Make_a_new_release
-# In short: https://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html#Updating-version-info
-# LIBVERSION=c:r:a
-# If the library source code has changed at all since the last update, then increment revision: c:r + 1:a.
-# If any interfaces have been added, removed, or changed since the last update: c + 1:0:0.
-# If any interfaces have been added since the last public release: c:r:a + 1.
-# If any interfaces have been removed or changed since the last public release: c:r:0.
-#library	what			description / commit summary line
-simtrace2	API/ABI change		osmo_st2_transport new member

contrib/flash.py

@@ -27,9 +27,7 @@ class Device(NamedTuple):
 DEVICE_SIMTRACE = Device(usb_vendor_id=0x1d50, usb_product_id=0x60e3, name="SIMtrace 2", url={"trace": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/simtrace-trace-dfu-latest.bin", "cardem": "https://osmocom.org/attachments/download/3868/simtrace-cardem-dfu.bin"})
 DEVICE_QMOD = Device(usb_vendor_id=0x1d50, usb_product_id=0x4004, name="sysmoQMOD (Quad Modem)", url={"cardem": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/qmod-cardem-dfu-latest.bin"})
 DEVICE_OWHW = Device(usb_vendor_id=0x1d50, usb_product_id=0x4001, name="OWHW", url={"cardem": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/owhw-cardem-dfu-latest.bin"})
-DEVICE_OCTSIMTEST = Device(usb_vendor_id=0x1d50, usb_product_id=0x616d, name="OCTSIMTEST", url={"cardem": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/octsimtest-cardem-dfu-latest.bin"})
-DEVICE_NGFF_CARDEM = Device(usb_vendor_id=0x1d50, usb_product_id=0x616e, name="ngff-cardem", url={"cardem": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/ngff_cardem-cardem-dfu-latest.bin"})
-DEVICES = [DEVICE_SIMTRACE, DEVICE_QMOD, DEVICE_OCTSIMTEST, DEVICE_NGFF_CARDEM]
+DEVICES = [DEVICE_SIMTRACE, DEVICE_QMOD]
 
 # which firmware does the SIMtrace USN interface subclass correspond
 FIRMWARE_SUBCLASS = {1: "trace", 2: "cardem"}

contrib/jenkins.sh

@@ -28,11 +28,9 @@ export PKG_CONFIG_PATH="$inst/lib/pkgconfig:$PKG_CONFIG_PATH"
 export LD_LIBRARY_PATH="$inst/lib"
 
 BUILDS=""
-BUILDS+="simtrace/dfu simtrace/blupdate simtrace/trace simtrace/cardem "
-BUILDS+="qmod/dfu qmod/blupdate qmod/cardem "
-BUILDS+="owhw/dfu owhw/blupdate owhw/cardem "
-BUILDS+="octsimtest/cardem "
-BUILDS+="ngff_cardem/dfu ngff_cardem/blupdate ngff_cardem/cardem ngff_cardem/trace "
+BUILDS+="simtrace/dfu simtrace/cardem simtrace/trace " # simtrace/triple_play
+BUILDS+="qmod/dfu qmod/cardem "
+BUILDS+="owhw/dfu owhw/cardem "
 
 cd $TOPDIR/firmware
 for build in $BUILDS; do
@@ -65,19 +63,20 @@ make dist
 #	make -C "$base/doc/manuals" publish
 #fi
 
+rm -rf $TOPDIR/firmware/bin/simtrace-cardem*
+
 if [ "x$publish" = "x--publish" ]; then
 	echo
 	echo "=============== UPLOAD BUILD  =============="
-	$TOPDIR/contrib/prepare_upload.sh
 
 	cat > "/build/known_hosts" <<EOF
-[ftp.osmocom.org]:48 ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDDgQ9HntlpWNmh953a2Gc8NysKE4orOatVT1wQkyzhARnfYUerRuwyNr1GqMyBKdSI9amYVBXJIOUFcpV81niA7zQRUs66bpIMkE9/rHxBd81SkorEPOIS84W4vm3SZtuNqa+fADcqe88Hcb0ZdTzjKILuwi19gzrQyME2knHY71EOETe9Yow5RD2hTIpB5ecNxI0LUKDq+Ii8HfBvndPBIr0BWYDugckQ3Bocf+yn/tn2/GZieFEyFpBGF/MnLbAAfUKIdeyFRX7ufaiWWz5yKAfEhtziqdAGZaXNaLG6gkpy3EixOAy6ZXuTAk3b3Y0FUmDjhOHllbPmTOcKMry9
-[ftp.osmocom.org]:48 ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBPdWn1kEousXuKsZ+qJEZTt/NSeASxCrUfNDW3LWtH+d8Ust7ZuKp/vuyG+5pe5pwpPOgFu7TjN+0lVjYJVXH54=
-[ftp.osmocom.org]:48 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIK8iivY70EiR5NiGChV39gRLjNpC8lvu1ZdHtdMw2zuX
+[rita.osmocom.org]:48 ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDDgQ9HntlpWNmh953a2Gc8NysKE4orOatVT1wQkyzhARnfYUerRuwyNr1GqMyBKdSI9amYVBXJIOUFcpV81niA7zQRUs66bpIMkE9/rHxBd81SkorEPOIS84W4vm3SZtuNqa+fADcqe88Hcb0ZdTzjKILuwi19gzrQyME2knHY71EOETe9Yow5RD2hTIpB5ecNxI0LUKDq+Ii8HfBvndPBIr0BWYDugckQ3Bocf+yn/tn2/GZieFEyFpBGF/MnLbAAfUKIdeyFRX7ufaiWWz5yKAfEhtziqdAGZaXNaLG6gkpy3EixOAy6ZXuTAk3b3Y0FUmDjhOHllbPmTOcKMry9
+[rita.osmocom.org]:48 ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBPdWn1kEousXuKsZ+qJEZTt/NSeASxCrUfNDW3LWtH+d8Ust7ZuKp/vuyG+5pe5pwpPOgFu7TjN+0lVjYJVXH54=
+[rita.osmocom.org]:48 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIK8iivY70EiR5NiGChV39gRLjNpC8lvu1ZdHtdMw2zuX
 EOF
 	SSH_COMMAND="ssh -o 'UserKnownHostsFile=/build/known_hosts' -p 48"
-	rsync --archive --verbose --compress --delete --rsh "$SSH_COMMAND" $TOPDIR/firmware/bin/*-latest.{bin,elf} binaries@ftp.osmocom.org:web-files/simtrace2/firmware/latest/
-	rsync --archive --verbose --compress --rsh "$SSH_COMMAND" --exclude $TOPDIR/firmware/bin/*-latest.{bin,elf} $TOPDIR/firmware/bin/*-*-*-*.{bin,elf} binaries@ftp.osmocom.org:web-files/simtrace2/firmware/all/
+	rsync --archive --verbose --compress --delete --rsh "$SSH_COMMAND" $TOPDIR/firmware/bin/*-latest.{bin,elf} binaries@rita.osmocom.org:web-files/simtrace2/firmware/latest/
+	rsync --archive --verbose --compress --rsh "$SSH_COMMAND" --exclude $TOPDIR/firmware/bin/*-latest.{bin,elf} $TOPDIR/firmware/bin/*-*-*-*.{bin,elf} binaries@rita.osmocom.org:web-files/simtrace2/firmware/all/
 fi
 
 echo

contrib/prepare_upload.sh

@@ -1,16 +0,0 @@
-#!/bin/sh -e
-# Create copies of binaries with -latest, -$GIT_VERSION (OS#4413, OS#3452)
-cd "$(dirname "$0")/.."
-
-GIT_VERSION="$(./git-version-gen .tarball-version)"
-
-echo "Copying binaries with "-latest" and "-$GIT_VERSION" appended..."
-
-cd firmware/bin
-for ext in bin elf; do
-	for file in *."$ext"; do
-		without_ext="${file%.*}"
-		cp -v "$file" "$without_ext-latest.$ext"
-		cp -v "$file" "$without_ext-$GIT_VERSION.$ext"
-	done
-done

contrib/simtrace.lua

@@ -1,92 +0,0 @@
-usb_simtrace_protocol = Proto("USB_simtrace",  "USB simtrace protocol")
-
-
-local control_commands = {
--- /* SIMTRACE_MSGC_GENERIC */
-[0x0000] = "SIMTRACE_CMD_DO_ERROR",
-[0x0001] = "SIMTRACE_CMD_BD_BOARD_INFO",
-
--- /* SIMTRACE_MSGC_CARDEM */
-[0x0101] = "SIMTRACE_MSGT_DT_CEMU_TX_DATA",
-[0x0102] = "SIMTRACE_MSGT_DT_CEMU_SET_ATR",
-[0x0103] = "SIMTRACE_MSGT_BD_CEMU_STATS",
-[0x0104] = "SIMTRACE_MSGT_BD_CEMU_STATUS",
-[0x0105] = "SIMTRACE_MSGT_DT_CEMU_CARDINSERT",
-[0x0106] = "SIMTRACE_MSGT_DO_CEMU_RX_DATA",
-[0x0107] = "SIMTRACE_MSGT_DO_CEMU_PTS",
-[0x0108] = "SIMTRACE_MSGT_BD_CEMU_CONFIG",
-
--- /* SIMTRACE_MSGC_MODEM */
-[0x0201] = "SIMTRACE_MSGT_DT_MODEM_RESET",
-[0x0202] = "SIMTRACE_MSGT_DT_MODEM_SIM_SELECT",
-[0x0203] = "SIMTRACE_MSGT_BD_MODEM_STATUS",
-
--- /* SIMTRACE_MSGC_SNIFF */
-[0x0300] = "SIMTRACE_MSGT_SNIFF_CHANGE",
-[0x0301] = "SIMTRACE_MSGT_SNIFF_FIDI",
-[0x0302] = "SIMTRACE_MSGT_SNIFF_ATR",
-[0x0304] = "SIMTRACE_MSGT_SNIFF_TPDU",
-[0x0303] = "SIMTRACE_MSGT_SNIFF_PPS"
-}
-
-local msgtype  = ProtoField.uint16("usb_simtrace.msgtype", "Message Type", base.HEX_DEC, control_commands)
-local seqnr  = ProtoField.uint8("usb_simtrace.seqnr", "Sequence Number", base.HEX_DEC)
-local slotnr  = ProtoField.uint8("usb_simtrace.slotnr", "Slot Number", base.HEX_DEC)
-local reserved  = ProtoField.uint16("usb_simtrace.reserved", "reserved", base.HEX_DEC)
-local payloadlen  = ProtoField.uint16("usb_simtrace.length", "length", base.HEX_DEC)
-local payload  = ProtoField.bytes("usb_simtrace.payload", "Data")
-
-local pb_and_rx  = ProtoField.uint32("usb_simtrace.pb_and_rx", "pb_and_rx", base.HEX_DEC, NULL, 0x8)
-local pb_and_tx  = ProtoField.uint32("usb_simtrace.pb_and_tx", "pb_and_tx", base.HEX_DEC, NULL, 0x4)
-local final  = ProtoField.uint32("usb_simtrace.final", "final", base.HEX_DEC, NULL, 0x2)
-local tpdu_hdr  = ProtoField.uint32("usb_simtrace.tpdu_hdr", "tpdu_hdr", base.HEX_DEC, NULL, 0x1)
-local rxtxdatalen  = ProtoField.uint16("usb_simtrace.rxtxdatalen", "rx/tx data length", base.HEX_DEC)
-local rxtxdata  = ProtoField.bytes("usb_simtrace.rxtxdata", "rx/tx (data)")
-usb_simtrace_protocol.fields = {
-  msgtype, seqnr, slotnr, reserved, payloadlen, payload, pb_and_rx, pb_and_tx, final, tpdu_hdr, rxtxdatalen, rxtxdata
-}
-function dissect_rxtx(payload_data,pinfo,tree)
-
-  local headerSubtree = tree:add(usb_simtrace_protocol, payload_data, "rx/tx data")
-  local len  = payload_data(8+4,2):le_uint();
-  local cmd32 =  payload_data(8+0,4):le_uint();
-
-  headerSubtree:add(pb_and_rx, cmd32)
-  headerSubtree:add(pb_and_tx, cmd32)
-  headerSubtree:add(final, cmd32)
-  headerSubtree:add(tpdu_hdr, cmd32)
-
-  headerSubtree:add(rxtxdatalen, len)
-  headerSubtree:add_le(rxtxdata, payload_data(8+6,len))
-end
-
-function usb_simtrace_protocol.dissector(buffer, pinfo, tree)
-  length = buffer:len()
-  if length == 0 then return end
-
-  pinfo.cols.protocol = usb_simtrace_protocol.name
-
-  local subtree = tree:add(usb_simtrace_protocol, buffer(), "USB simtrace Data")
-  local command = buffer(0,2):uint()
-
-  subtree:add(msgtype, command):set_generated()
-  subtree:add(seqnr, buffer(2,1))
-  subtree:add(slotnr, buffer(3,1))
-  subtree:add_le(payloadlen, buffer(6,2))
-  pinfo.cols.info = string.format("Cmd 0x%04X : %s", command, control_commands[command])
-  local payload_data = buffer(8,length-8)
-  if(command == 0x0101 or command == 0x0106) then
-    return dissect_rxtx(buffer(),pinfo,subtree)
-  else
-    subtree:add(payload, payload_data)
-  end
-
-end
-
-
-function usb_simtrace_protocol.init()
-local usb_product_dissectors = DissectorTable.get("usb.product")
-usb_product_dissectors:add(0x1d50616d, usb_simtrace_protocol)
-usb_product_dissectors:add(0x1d50616e, usb_simtrace_protocol)
-DissectorTable.get("usb.bulk"):add(0xffff, usb_simtrace_protocol)
-end

debian/changelog

@@ -1,217 +1,8 @@
-simtrace2 (0.8.2) unstable; urgency=medium
+simtrace2 (0.5.2) UNRELEASED; urgency=medium
 
-  * firmware/Makefile: don't use distribution's CFLAGS
-
- -- Oliver Smith <osmith@sysmocom.de>  Fri, 15 Sep 2023 11:17:37 +0200
-
-simtrace2 (0.8.1) unstable; urgency=medium
-
-  * host/contrib/simtrace2.spec.in: fix soname
-
- -- Oliver Smith <osmith@sysmocom.de>  Fri, 10 Dec 2021 10:04:28 +0100
-
-simtrace2 (0.8.0) unstable; urgency=medium
-
-  [ Harald Welte ]
   * adapt to host tools in autotools
-  * simtrace2_api: Remove dead code
-  * fix baudrate of 'make log'
-  * qmod DFU: Don't overwrite memory beyond end of usb_strings[]
-  * usb_strings.txt: s/SIMtrace Phone/SIMtrace Card Emulation/
-  * Patch actual board name into the USB iProduct string descriptor
-  * Build only 'reasonable' combinations of APP/MEMORY
-  * stdio: Add support for %p format string (pointer address)
-  * Fix format string related warnings (int vs. long)
-  * Add missing CR to achieve CRLF at end of log lines
-  * more comments in host_communication.c.
-  * usb_buf: count number of elements in queue
-  * usb_buf: Limit the maximum queue length to 3 elements
-  * qmod: Don't print EEPROM operations in help when not supported
-  * cosmetic: board_qmod: Annotate #endif with comments
-  * qmod: Document '!' and '@' commands on UART
-  * implement minimalistic talloc_report(); add 't' command on UART
-  * update copyright statement
-  * cardem: Fix memory leak on unsupported SIMTRACE_MSGT_DT_CEMU_CARDINSERT
-  * usb_buf: Actually limit queue to 3 elements, not 4
-  * USBD_HAL: Don't disable UDP peripheral clock on suspend
-  * usb_buf: Properly initialize buffered_endpoint->ep number
-  * pseudo_talloc: Increment number of buffers from 10 to 20
-  * card_emu: Factor out card_handle_reset() from card_emu_init()
-  * cardem: Move card_emu_io_statechg() calls out of interrupt context
-  * cardem: RST resets all state (including release of buffers)
-  * host_communication: Send zero-length-packet on wMaxPacketSize
-  * card_emu: Initialize PTSS state every time we start PTS
-  * card_emu: Avoid recursive calls to card_set_state()
-  * card_emu: Always print state names in string representation
-  * card_emu: Remove extraneous code
-  * card_emu: Remove extraneous initialization of ch->pts.state
-  * cardem: Make card_emu_report_status() optionally use IRQ endpoint
-  * cardem: Add SIMTRACE_MSGT_BD_CEMU_CONFIG
-  * cardem: Implement support for CEMU_FEAT_F_STATUS_IRQ
-  * simtrace2-sniff: Reformat value_string to pass our validation scripts
-  * firmware: Reformat value_string to pass our validation scripts
-  * jenkins.sh: Add verify_value_string_arrays_are_terminated.py
-  * [lib] apdu_dispatch: Use DLGLOBAL and don't printf() directly
-  * [lib] apdu_dispatch: Don't print APDU state to stdout
-  * OSMO_ASSERT() on double-free or invalid pointer
-  * Update .gitignore file for host
-  * migrate to libosmousb
-  * library: Add osmo_st2_compatible_dev_idsp[]
-  * firmware: move printing of welcome banner to common function print_banner()
-  * firmware: apps/cardem/main.c: Synchronize with apps/trace/main.c
-  * host: Add COPYING file for host software (GPLv2)
-  * host/lib/gsmtap.c: Add GPLv2 disclaimer
-  * increase ringbuffer size from 512 to 1024 bytes
-  * simtrace2_api: Add osmo_st2_cardem_request_config()
-  * Disable interrupts during EEFC_ReadUniqueID()
-  * cardem: Fix infinite loop + watchdog reset on long OUT message
-  * extend osmo_st2_cardem_inst with fields required by osmo-remsim
-  * cosmetic: Add missing CR to LF in dispatch_received_usb_msg()
-  * USBD.c: Don't reset EP0 on SetConfiguration(0)
-  * pio_it.c: Permit repeated calls to PIO_ConfigureIt()
-  * simtrace2_siff: getopt_long() returns int, not char
-  * Introduce support for asynchronous USB transmission
-  * firmware: fix builds with gcc stack smashing protection enabled
-  * dfu: Shrink code by 144 bytes (by not calling PIO_InitializeInterrupts)
-  * dfu: Save another 60 bytes by changing the way we print horizontal lines
-  * migrate from BSC_FD_* to OSMO_FD_*
-  * remove usb2udp
-  * rename simtrace2-remsim to simtrace2-cardem-pcsc
-  * Update README
-  * remove old pre-autoconf makefile
-  * simtrace2-cardem-pcsc: Make it work again
-  * Revert "add ISO 7816-3 library to remsim project"
-  * Revert "add library providing ISO 7816-3 utilities"
-  * card_emu: waiting_time is stored in etu, not clocks.
-  * card_emu: Rename fi to Fi and di to Di
-  * card_emu: Clarify and differentiate F/Fi/F_index/Fi_index
-  * iso7816_fidi: Add iso7816_3_ prefix to symbols; fix terminology
-  * card_emu: improve reset detection conditions
-  * card_emu: explicitly initialize PTS and TPDU states
-  * card_emu: Use USART timeout for waiting time
-  * card_emu: Fix USART timer, particularly in re-start situations
-  * card_emu: Fix computation of waiting time
-  * contrib/jenkins.sh: Switch from rita -> ftp.osmocom.org
-  * st2-cardem-pcsc: Fix goto-in-while mess
-  * st2-cardem-pcsc: Use ATR of real card by default
-  * simtrace board.h: Enable HAVE_CARDEM if we build the cardem firmware
-  * jenkins.sh: build 'cardem' firmware also for simtrace board
-  * Revert "cardem: disable upload for simtrace2"
-  * simtrace2-cardem-pcsc: Decode STATUS flags to strings
-  * simtrace2-cardem-pcsc: Reset the real card if reader resets cardem
-  * assert: Use printf_sync() to ensure printing of assert / panic
-  * Add usb product ID of sysmoOCTSIMTEST
-  * octsimtest: remove lots of unused #defines
-  * octsimtest: most code for support of this new board
-  * octsimtest: Switch direction of I/O level shifter depending on uart tx / rx
-  * cardem-pcsc: initialize libosmocore logging
-  * octsimtest: Adjust VCC voltage thresholds (resistive VCC divider)
-  * contrib/jenkins.sh: Build 'cardem' app for 'octsimtest' board
-  * firmware: octsimtest: Fix IO_DIR pin definition
-  * firmware: octsimtest: Make slot mux configurable via USB
-  * firmware: octsimtest: mcp23017 initializaiton
-  * firmware: cardem: re-factor CARDINSERT command processing
-  * firmware: octsimtest: Support SIMTRACE_MSGT_DT_CEMU_CARDINSERT
-  * firmware: octsimtest: use TRACE_* macros instead of direct printf
-  * firmware: octsimtest: Fix disabling the card_insert signal
-  * firmware: octsimtest: Add i/I command for setting card-insert via I2C GPIO
-  * firmware: octsimtest: ensure all card_insert GPIO are 0 after reset
-  * don't printf() directly from library code, go via libosmocore logging
-  * simtrace2-list: Use osmo_st2_compatible_dev_ids[]
-  * board_gpio.gnumeric: Add ngff-cardem pin-out
-  * 99-simtrace2.rules: Add OCTSIMTEST
-  * contrib/flash.py: Add OCTSIMTEST support
-  * Introduce simtrace2-tool
-  * introduce support for new ngff_cardem board
-  * simtrace2.spec: Add simtrace2-tool binary to package
-  * contrib/jenkins.sh: Build APP=cardem for BOARD=ngff_cardem
-  * jenkins.sh: Build 'trace' firmware for ngff_cardem
-  * Use osmo_libusb_{init,exit}() instead of libusb_{init,exit}()
-  * simtrace2-cardem-pcsc: Remove double libusb initialization
-  * simtrace2-tool: Initialize logging to avoid error on first log output
-  * cardem-pcsc: Fix return of uninitialized variable
-  * host: Upgrade libosmocore dependency to 1.4.0
 
-  [ Kévin Redon ]
-  * minor: fix spacing
-  * minor: updated copyright years
-  * dfu: minor: make debug output only verbose in info level
-  * minor: move USB debug output from info to debug level
-  * minor: improve debug output
-  * minor : fix typo in comment
-  * better detect VCC and nRST changes on simtrace2 board
-  * minor: ignore usbstring binary
-  * simtrace2-remsim: Use simplest ATR
-  * cardem: use simplest ATR as default ATR
-  * minor: fix typo
-  * DFU: increase USB reset duration to 50 ms
-  * DFU: restart bootloader when USB conf failed
-  * Makefile: add linker option showing memory usage
-  * improve shared bootloader/application memory
-  * minor: improve trace output
-  * DFU: add DFU application
-  * add script to flash latest firmware
-  * minor: use same LED pattern for cardem as other applications
-  * cardem: currently simtrace does not support cardem
-  * add library providing ISO 7816-3 utilities
-  * add ISO 7816-3 library to remsim project
-  * rename PIN_PHONE_{CLK,IO} to PIN_USIM1_{CLK,IO}
-  * minor add comments
-  * make sim switch board specific
-
-  [ Eric Wild ]
-  * remsim: allow selecting pcsc reader number
-  * cardem: disable upload for simtrace2
-  * firmware: do not allow undefined symbols
-  * firmware: allow verbose builds
-  * cardem: choose a more reasonable default ATR
-  * contrib: add a basic simtrace lua dissector for wireshark
-  * cardem: free the buf
-  * cardemu: support 1v8 for the tester
-  * firmware: data sections
-  * firmware: proper makefile deps
-  * firmware: make the ngff beakout blink
-  * simtrace2-cardem: use local sim on exit
-  * contrib: more cardem dissection
-  * firmware: trace for ngff
-  * cardem: fix spurious NULL bytes during transfers
-  * contrib/jenkins.sh: build ngff_Cardem dfu bootloader
-  * contrib: allow manually forcing bulk simtrace dissection
-  * contrib/jenkins.sh: lower trace to make bl fit
-  * Revert "firmware: data sections"
-  * add the ngff cardem to default build targets
-  * drop unused exidx sections when linking
-  * clang build support
-  * fix bootloader led config crash
-  * firmware: add bootloader update "app"
-  * firmware: remove usb pullup that dates back to simtrace1
-  * firmware: increase reset delay before usb reattach
-  * firmware: drop cref printing
-  * add our default clang-format file
-  * firmware: add missing usb strings to blupdate that prevented building it
-  * jenkins: build bootloader updater
-  * firmware: remove dfu-dfu default target
-
-  [ Oliver Smith ]
-  * contrib: import RPM spec
-  * contrib: integrate RPM spec
-  * d/source/format: new file
-  * firmware/Makefile: fix UNKNOWN in OBS packages
-  * host: use git-version-gen/tarball-v. from topdir
-  * gitignore: add firmware/apps/*/usb_strings.txt.patched
-  * firmware: create duplicate files for upload only
-  * contrib/prepare_upload.sh: fix cd problems
-  * firmware: qmod-dfu: disable stack protector
-  * firmware: disable stack protector by default
-  * gitreview: new file
-
-  [ Leonard Hübner ]
-  * remsim: adding cli argument to set the atr
-
-  [ Eric ]
-  * dfu: let the device reset itself
-
- -- Harald Welte <laforge@osmocom.org>  Thu, 09 Dec 2021 08:12:56 +0100
+ -- Harald Welte <lafore@gnumonks.org>  Thu, 28 Nov 2019 00:44:57 +0100
 
 simtrace2 (0.5.1) unstable; urgency=medium
 

debian/control

@@ -10,7 +10,7 @@ Build-Depends: debhelper (>= 9),
                pkg-config,
                git,
                dh-autoreconf,
-               libosmocore-dev (>= 1.4.0),
+               libosmocore-dev,
                libpcsclite-dev,
                libnewlib-arm-none-eabi,
                libusb-1.0-0-dev,
@@ -33,11 +33,11 @@ Package: simtrace2-utils
 Section: devel
 Architecture: any
 Multi-Arch: same
-Depends: ${shlibs:Depends}, ${misc:Depends}, libosmo-simtrace2-1
+Depends: ${shlibs:Depends}, ${misc:Depends}, libosmo-simtrace2-0
 Recommends: simtrace2-firmware
 Description: Host utilities to communicate with SIMtrace2 USB Devices.
 
-Package: libosmo-simtrace2-1
+Package: libosmo-simtrace2-0
 Section: libs
 Architecture: any
 Multi-Arch: same
@@ -52,7 +52,7 @@ Package: libosmo-simtrace2-dev
 Section: libdevel
 Architecture: any
 Multi-Arch: same
-Depends: libosmo-simtrace2-1, ${misc:Depends}
+Depends: libosmo-simtrace2-0, ${misc:Depends}
 Description: Development headers for Osmocom SIMtrace2 library
   This library contains core "driver" functionality to interface with the
   Osmocom SIMtrace2 (and compatible) USB device firmware.  It enables

debian/source/format

@@ -1 +0,0 @@
-3.0 (native)

firmware/Makefile

@@ -28,26 +28,11 @@
 
 #   Makefile for compiling the Getting Started with SAM3S Microcontrollers project
 
-GIT_VERSION=$(shell $(TOP)/git-version-gen $(TOP)/.tarball-version)
-
-CFLAGS = \
-	 -Werror=format-security \
-	 -Wformat \
-	 -g \
-	 $(NULL)
-
+GIT_VERSION=$(shell $(TOP)/git-version-gen $(TOP)/.tarvers)
 #-------------------------------------------------------------------------------
 #        User-modifiable options
 #-------------------------------------------------------------------------------
 
-# verbosity
-V ?= 0
-ifneq ("$(V)","0")
-SILENT :=
-else
-SILENT := @
-endif
-
 # Chip & board used for compilation
 # (can be overriden by adding CHIP=chip and BOARD=board to the command-line)
 CHIP  ?= sam3s4
@@ -56,8 +41,7 @@ APP ?= dfu
 
 # Defines which are the available memory targets for the SAM3S-EK board.
 ifeq ($(APP), dfu)
-MEMORIES ?= flash
-TRACE_LEVEL ?= 0
+MEMORIES ?= flash dfu
 else
 MEMORIES ?= dfu
 endif
@@ -80,20 +64,12 @@ AT91LIB_USB_DFU_PATH = $(AT91LIB)/usb/device/dfu
 # Tool suffix when cross-compiling
 CROSS_COMPILE = arm-none-eabi-
 
-USE_CLANG ?= 0
-ifneq ("$(USE_CLANG)","0")
-# --target=thumbv7m-none-eabi
-CC = clang
-LD = ld.lld
-SIZE = llvm-size
-LIBS = -nostdlib
-else
+LIBS = -Wl,--start-group -lgcc -Wl,--end-group -nostdlib
+
+# Compilation tools
 CC = $(CROSS_COMPILE)gcc
 LD = $(CROSS_COMPILE)ld
 SIZE = $(CROSS_COMPILE)size
-LIBS = -Wl,--start-group -lgcc -Wl,--end-group -nostdlib
-endif
-
 STRIP = $(CROSS_COMPILE)strip
 OBJCOPY = $(CROSS_COMPILE)objcopy
 GDB = $(CROSS_COMPILE)gdb
@@ -124,7 +100,7 @@ C_LIBUSB     = USBDescriptors.c USBRequests.c USBD.c USBDCallbacks.c USBDDriver.
 C_LIBUSB_RT  = dfu.c dfu_runtime.c
 C_LIBUSB_DFU = dfu.c dfu_desc.c dfu_driver.c
 C_LIBCOMMON  = string.c stdio.c fputs.c usb_buf.c ringbuffer.c pseudo_talloc.c host_communication.c \
-	       main_common.c stack_check.c
+	       main_common.c
 
 C_BOARD      = $(notdir $(wildcard libboard/common/source/*.c))
 C_BOARD     += $(notdir $(wildcard libboard/$(BOARD)/source/*.c))
@@ -154,11 +130,7 @@ ALLOW_PEER_ERASE?=0
 #CFLAGS+=-DUSB_NO_DEBUG=1
 
 # Optimization level, put in comment for debugging
-ifneq ("$(USE_CLANG)","0")
-OPTIMIZATION ?= -Oz
-else
 OPTIMIZATION ?= -Os
-endif
 
 # Flags
 INCLUDES_USB = -I$(AT91LIB)/usb/include -I$(AT91LIB)
@@ -172,11 +144,6 @@ INCLUDES += -Ilibosmocore/include
 INCLUDES += -Isrc_simtrace -Iinclude
 INCLUDES += -Iapps/$(APP)
 
-ifneq ("$(USE_CLANG)","0")
-CFLAGS += -Wno-unknown-warning-option -Wno-empty-body -fno-exceptions -fno-unwind-tables --config armv7em_soft_nofp_nosys
-else
-CFLAGS += -Wno-suggest-attribute=noreturn --param max-inline-insns-single=500
-endif
 CFLAGS += -Wall -Wchar-subscripts -Wcomment -Wimplicit-int -Wformat=2
 CFLAGS += -Werror-implicit-function-declaration -Wmain -Wparentheses
 CFLAGS += -Wsequence-point -Wreturn-type -Wswitch -Wtrigraphs #-Wunused
@@ -189,33 +156,22 @@ CFLAGS += -Wredundant-decls -Wnested-externs #-Winline -Wlong-long
 CFLAGS += -Wunreachable-code
 #CFLAGS += -Wcast-align
 #CFLAGS += -std=c11
-#CFLAGS += -Wmissing-noreturn
+CFLAGS += -Wmissing-noreturn
 #CFLAGS += -Wconversion
 CFLAGS += -Wno-unused-but-set-variable -Wno-unused-variable
-
+CFLAGS += -Wno-suggest-attribute=noreturn
 
 # -mlong-calls  -Wall
 #CFLAGS += -save-temps -fverbose-asm
 #CFLAGS += -Wa,-a,-ad
-CFLAGS += -D__ARM -fno-builtin
-CFLAGS += -mcpu=cortex-m3 -mthumb # -mfix-cortex-m3-ldrd
+CFLAGS += -D__ARM
+CFLAGS += --param max-inline-insns-single=500 -mcpu=cortex-m3 -mthumb # -mfix-cortex-m3-ldrd
 CFLAGS += -ffunction-sections -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -DTRACE_LEVEL=$(TRACE_LEVEL) -DALLOW_PEER_ERASE=$(ALLOW_PEER_ERASE)
 CFLAGS += -DGIT_VERSION=\"$(GIT_VERSION)\"
 CFLAGS += -DBOARD=\"$(BOARD)\" -DBOARD_$(BOARD)
 CFLAGS += -DAPPLICATION=\"$(APP)\" -DAPPLICATION_$(APP)
-
-# Disable stack protector by default (OS#5081)
-ifeq ($(STACK_PROTECTOR), 1)
-CFLAGS += -fstack-protector
-else
-CFLAGS += -fno-stack-protector
-endif
-
 ASFLAGS = -mcpu=cortex-m3 -mthumb -Wall -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -D__ASSEMBLY__
-LDFLAGS = -mcpu=cortex-m3 -mthumb -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=ResetException -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--no-undefined $(LIB)
-ifeq ("$(USE_CLANG)","0")
-LDFLAGS += -Wl,--warn-section-align -Wl,--print-memory-usage
-endif
+LDFLAGS = -mcpu=cortex-m3 -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=ResetException -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--warn-unresolved-symbols -Wl,--print-memory-usage $(LIB)
 #LD_OPTIONAL=-Wl,--print-gc-sections -Wl,--stats
 
 # Append BIN directories to output filename
@@ -225,7 +181,7 @@ OUTPUT := $(BIN)/$(OUTPUT)
 #		Rules
 #-------------------------------------------------------------------------------
 
-all: $(BIN) $(OBJ) $(MEMORIES)
+all: apps/$(APP)/usb_strings_generated.h $(BIN) $(OBJ) $(MEMORIES)
 
 combined: $(OUTPUT)-combined.bin
 
@@ -236,7 +192,7 @@ $(BIN)/$(BOARD)-dfu-flash-padded.bin: $(BIN)/$(BOARD)-dfu-flash.bin
 $(OUTPUT)-combined.bin: $(BIN)/$(BOARD)-dfu-flash-padded.bin $(OUTPUT)-dfu.bin
 	cat $^ > $@
 
-$(BIN) $(OBJ): apps/$(APP)/usb_strings_generated.h
+$(BIN) $(OBJ):
 	mkdir -p $@
 
 usbstring/usbstring: usbstring/usbstring.c
@@ -252,48 +208,30 @@ apps/$(APP)/usb_strings_generated.h: apps/$(APP)/usb_strings.txt.patched usbstri
 define RULES
 C_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(C_OBJECTS))
 ASM_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(ASM_OBJECTS))
-EXTRA_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(EXTRA_OBJECTS))
 
-build_$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1)) $$(EXTRA_OBJECTS_$(1))
-	$(SILENT)$(CC) $(CFLAGS) $(LDFLAGS) $(LD_OPTIONAL) -T"libboard/common/resources/$(CHIP)/$(1).ld" -Wl,-Map,$(OUTPUT)-$(1).map -o $(OUTPUT)-$(1).elf $$^ $(LIBS)
-	$(SILENT)$(NM) $(OUTPUT)-$(1).elf >$(OUTPUT)-$(1).elf.txt
-	$(SILENT)$(OBJCOPY) -O binary $(OUTPUT)-$(1).elf $(OUTPUT)-$(1).bin
-	$(SILENT)$(SIZE) $$^ $(OUTPUT)-$(1).elf
+$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1))
+	@$(CC) $(LDFLAGS) $(LD_OPTIONAL) -T"libboard/common/resources/$(CHIP)/$$@.ld" -Wl,-Map,$(OUTPUT)-$$@.map -o $(OUTPUT)-$$@.elf $$^ $(LIBS)
+	cp $(OUTPUT)-$$@.elf $(OUTPUT)-$$@-$(GIT_VERSION).elf
+	cp $(OUTPUT)-$$@.elf $(OUTPUT)-$$@-latest.elf
+	@$(NM) $(OUTPUT)-$$@.elf >$(OUTPUT)-$$@.elf.txt
+	@$(OBJCOPY) -O binary $(OUTPUT)-$$@.elf $(OUTPUT)-$$@.bin
+	cp $(OUTPUT)-$$@.bin $(OUTPUT)-$$@-$(GIT_VERSION).bin
+	cp $(OUTPUT)-$$@.bin $(OUTPUT)-$$@-latest.bin
+	@$(SIZE) $$^ $(OUTPUT)-$$@.elf
 
 $$(C_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.c Makefile $(OBJ) $(BIN)
 	@echo [COMPILING $$<]
-	$(SILENT)$(CC) $(CFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -c -o $$@ $$<
+	@$(CC) $(CFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -Wa,-ahlms=$(BIN)/$$*.lst -c -o $$@ $$<
 
 $$(ASM_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.S Makefile $(OBJ) $(BIN)
 	@echo [ASSEMBLING $$@]
-	$(SILENT)$(CC) $(ASFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -c -o $$@ $$<
+	@$(CC) $(ASFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -c -o $$@ $$<
 
 debug_$(1): $(1)
 	$(GDB) -x "$(BOARD_LIB)/resources/gcc/$(BOARD)_$(1).gdb" -ex "reset" -readnow -se $(OUTPUT)-$(1).elf
 endef
 
-ALL_MEMORIES = dfu flash ram
-$(foreach MEMORY, $(ALL_MEMORIES), $(eval $(call RULES,$(MEMORY))))
-
-# files with those names do exist..
-.PHONY: ram
-.PHONY: dfu
-.PHONY: flash
-ram: build_ram
-dfu: build_dfu
-ifeq ($(APP), blupdate)
-	$(info updating updater section with padded bootloader file..)
-	$(SILENT)dd if=/dev/zero bs=16384 count=1 of=$(BIN)/$(BOARD)-dfu-flash-padded.bin
-	$(SILENT)dd if=$(BIN)/$(BOARD)-dfu-flash.bin conv=notrunc of=$(BIN)/$(BOARD)-dfu-flash-padded.bin
-	$(SILENT)$(OBJCOPY) --update-section .blupdate=bin/$(BOARD)-dfu-flash-padded.bin bin/$(BOARD)-blupdate-dfu.elf
-	$(SILENT)$(OBJCOPY) -O binary bin/$(BOARD)-blupdate-dfu.elf bin/$(BOARD)-blupdate-dfu.bin
-endif
-flash: build_flash
-#alternate way of embedding: obj file
-#ifeq ($(APP), dfu)
-#	$(info bootloader bin file to obj..)
-#	$(SILENT)$(OBJCOPY) --rename-section .data=.fwupdate -I binary -O elf32-littlearm bin/$(BOARD)-dfu-flash.bin $(OBJ)/flash_fwupdate.o
-#endif
+$(foreach MEMORY, $(MEMORIES), $(eval $(call RULES,$(MEMORY))))
 
 program:
 	openocd -f openocd/openocd.cfg -c "init" -c "halt" -c "flash write_bank 0 ./bin/project-flash.bin 0" -c "reset" -c "shutdown"

firmware/apps/blupdate/Makefile

@@ -1,12 +0,0 @@
-
-C_FILES += $(C_LIBUSB_DFU)
-
-# Trace level used for compilation
-# (can be overridden by adding TRACE_LEVEL=#number to the command-line)
-# TRACE_LEVEL_DEBUG      5
-# TRACE_LEVEL_INFO       4
-# TRACE_LEVEL_WARNING    3
-# TRACE_LEVEL_ERROR      2
-# TRACE_LEVEL_FATAL      1
-# TRACE_LEVEL_NO_TRACE   0
-TRACE_LEVEL ?= 3

firmware/apps/blupdate/main.c

@@ -1,134 +0,0 @@
-/* SIMtrace 2 firmware USB DFU bootloader
- *
- * (C) 2015-2017 by Harald Welte <hwelte@hmw-consulting.de>
- * (C) 2018-2019 by sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-#include "board.h"
-#include "core_cm3.h"
-#include "flashd.h"
-#include "utils.h"
-#include "usb/device/dfu/dfu.h"
-#include "usb/common/dfu/usb_dfu.h"
-#include "manifest.h"
-#include "USBD_HAL.h"
-
-#include <osmocom/core/timer.h>
-
-/* actual section content must be replaced with the padded bootloader by running objcopy! */
-const uint32_t bl_update_data[BOARD_DFU_BOOT_SIZE / sizeof(uint32_t)] __attribute__((section(".fwupdate"))) = { 0xFF };
-
-unsigned int g_unique_id[4];
-/* remember if the watchdog has been configured in the main loop so we can kick it in the ISR */
-static bool watchdog_configured = false;
-
-extern uint32_t _end;
-extern uint32_t _srelocate;
-extern uint32_t _etext;
-
-void DFURT_SwitchToDFU(void)
-{
-}
-void USBDFU_Runtime_RequestHandler(const USBGenericRequest *request)
-{
-}
-int USBDFU_handle_dnload(uint8_t altif, unsigned int offset, uint8_t *data, unsigned int len)
-{
-	return 0;
-}
-int USBDFU_handle_upload(uint8_t altif, unsigned int offset, uint8_t *data, unsigned int req_len)
-{
-	return 0;
-}
-int USBDFU_OverrideEnterDFU(void)
-{
-	return 0;
-}
-
-__attribute__((section(".ramfunc"), noinline)) static uint32_t flash_wait_ready()
-{
-	Efc *efc = EFC;
-	uint32_t dwStatus;
-
-	do {
-		dwStatus = efc->EEFC_FSR;
-	} while ((dwStatus & EEFC_FSR_FRDY) != EEFC_FSR_FRDY);
-	return (dwStatus & (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE));
-}
-
-__attribute__((section(".ramfunc"), noinline)) static void flash_cmd(uint32_t dwCommand, uint32_t dwArgument)
-{
-	Efc *efc = EFC;
-	uint32_t dwStatus;
-	efc->EEFC_FCR = EEFC_FCR_FKEY(0x5A) | EEFC_FCR_FARG(dwArgument) | EEFC_FCR_FCMD(dwCommand);
-}
-
-__attribute__((section(".ramfunc"), noinline, noreturn)) static void erase_first_app_sector()
-{
-	/* page 64 */
-	uint32_t first_app_page = (BOARD_DFU_BOOT_SIZE / IFLASH_PAGE_SIZE);
-	uint32_t *first_app_address = (uint32_t *)(IFLASH_ADDR + first_app_page * IFLASH_PAGE_SIZE + 0);
-
-#if 1
-	/* overwrite first app sector so we don't keep booting this */
-	for (int i = 0; i < IFLASH_PAGE_SIZE / 4; i++)
-		first_app_address[i] = 0xffffffff;
-
-	flash_cmd(EFC_FCMD_EWP, first_app_page);
-#else
-	/* why does erasing the whole flash with a protected bootloader not work at all? */
-	flash_cmd(EFC_FCMD_EA, 0);
-#endif
-	flash_wait_ready();
-	for (;;)
-		NVIC_SystemReset();
-}
-
-#define MAX_USB_ITER BOARD_MCK / 72 // This should be around a second
-extern int main(void)
-{
-	uint8_t isUsbConnected = 0;
-	unsigned int i = 0;
-	uint32_t reset_cause = (RSTC->RSTC_SR & RSTC_SR_RSTTYP_Msk) >> RSTC_SR_RSTTYP_Pos;
-
-	/* Enable watchdog for 2000ms, with no window */
-	WDT_Enable(WDT, WDT_MR_WDRSTEN | WDT_MR_WDDBGHLT | WDT_MR_WDIDLEHLT | (WDT_GetPeriod(2000) << 16) |
-				WDT_GetPeriod(2000));
-	watchdog_configured = true;
-
-	EEFC_ReadUniqueID(g_unique_id);
-
-	printf("\n\r\n\r");
-	printf("bootloader updater %s for board %s\n\r"
-	       "(C) 2010-2017 by Harald Welte, 2018-2019 by Kevin Redon\n\r",
-	       manifest_revision, manifest_board);
-
-	/* clear g_dfu on power-up reset */
-	memset(g_dfu, 0, sizeof(*g_dfu));
-
-	TRACE_INFO("USB init...\n\r");
-	/* Signal USB reset by disabling the pull-up on USB D+ for at least 10 ms */
-	USBD_Disconnect();
-
-	/* Initialize the flash to be able to write it, using the IAP ROM code */
-	FLASHD_Initialize(BOARD_MCK, 1);
-
-	__disable_irq();
-	FLASHD_Unlock(IFLASH_ADDR, IFLASH_ADDR + IFLASH_SIZE - 1, 0, 0);
-	FLASHD_Write(IFLASH_ADDR, bl_update_data, BOARD_DFU_BOOT_SIZE);
-
-	erase_first_app_sector();
-}

firmware/apps/blupdate/usb_strings.txt

@@ -1,6 +0,0 @@
-sysmocom - s.f.m.c. GmbH
-PRODUCT_STRING
-bootloader updater
-RAM
-Flash (Application Partition)
-Flash (Bootloader Partition)

firmware/apps/cardem/Makefile

@@ -1,3 +1,3 @@
 C_FILES += $(C_LIBUSB_RT)
 
-C_FILES += card_emu.c cciddriver.c iso7816_4.c iso7816_fidi.c mitm.c mode_cardemu.c mode_ccid.c simtrace_iso7816.c sniffer.c usb.c
+C_FILES += card_emu.c cciddriver.c iso7816_4.c iso7816_fidi.c mitm.c mode_cardemu.c mode_ccid.c simtrace_iso7816.c sniffer.c tc_etu.c usb.c

firmware/apps/cardem/main.c

@@ -71,13 +71,8 @@ static const conf_func config_func_ptrs[] = {
 		.init = mode_cardemu_init,
 		.exit = mode_cardemu_exit,
 		.run = mode_cardemu_run,
-#if defined (ngff_cardem)
-		.usart0_irq = mode_cardemu_usart1_irq,
-		.usart1_irq = mode_cardemu_usart0_irq,
-#else
 		.usart0_irq = mode_cardemu_usart0_irq,
 		.usart1_irq = mode_cardemu_usart1_irq,
-#endif
 	},
 #endif
 #ifdef HAVE_MITM
@@ -152,8 +147,7 @@ extern int main(void)
 	unsigned int i = 0;
 
 	led_init();
-	led_blink(LED_RED, BLINK_ALWAYS_ON);
-	led_blink(LED_GREEN, BLINK_ALWAYS_ON);
+	led_blink(LED_RED, BLINK_3O_5F);
 
 	/* Enable watchdog for 2000ms, with no window */
 	WDT_Enable(WDT, WDT_MR_WDRSTEN | WDT_MR_WDDBGHLT | WDT_MR_WDIDLEHLT |
@@ -226,6 +220,7 @@ extern int main(void)
 			}
 			last_simtrace_config = simtrace_config;
 		} else {
+			//FIXME: usb_proces() for every interface in this configuration?
 			if (config_func_ptrs[simtrace_config].run) {
 				config_func_ptrs[simtrace_config].run();
 			}

firmware/apps/dfu/main.c

@@ -243,17 +243,6 @@ static void check_exec_dbg_cmd(void)
 	//board_exec_dbg_cmd(ch);
 }
 
-/* print a horizontal line of '=' characters; Doing this in a loop vs. using a 'const'
- * string saves us ~60 bytes of executable size (matters particularly for DFU loader) */
-static void print_line(void)
-{
-	int i;
-	for (i = 0; i < 78; i++)
-		fputc('=', stdout);
-	fputc('\n', stdout);
-	fputc('\r', stdout);
-}
-
 /*------------------------------------------------------------------------------
  *        Main
  *------------------------------------------------------------------------------*/
@@ -271,19 +260,21 @@ extern int main(void)
 
 #ifdef PINS_LEDS
 	/* Configure LED */
-	PIO_Configure(pinsLeds, PIO_LISTSIZE(pinsLeds));
+	PIO_Configure(pinsLeds, sizeof(pinsLeds));
 	PIO_Set(&pinsLeds[LED_NUM_RED]);
 	PIO_Clear(&pinsLeds[LED_NUM_GREEN]);
 #endif
 
+	PIO_InitializeInterrupts(0);
+
 	EEFC_ReadUniqueID(g_unique_id);
 
-	printf("\n\r\n\r");
-	print_line();
-	printf("DFU bootloader %s for board %s\n\r"
-		"(C) 2010-2017 by Harald Welte, 2018-2019 by Kevin Redon\n\r",
+	printf("\n\r\n\r"
+		"=============================================================================\n\r"
+		"DFU bootloader %s for board %s\n\r"
+		"(C) 2010-2017 by Harald Welte, 2018-2019 by Kevin Redon\n\r"
+		"=============================================================================\n\r",
 		manifest_revision, manifest_board);
-	print_line();
 
 #if (TRACE_LEVEL >= TRACE_LEVEL_INFO)
 	TRACE_INFO("Chip ID: 0x%08lx (Ext 0x%08lx)\n\r", CHIPID->CHIPID_CIDR, CHIPID->CHIPID_EXID);
@@ -342,7 +333,16 @@ extern int main(void)
 	TRACE_INFO("USB init...\n\r");
 	/* Signal USB reset by disabling the pull-up on USB D+ for at least 10 ms */
 	USBD_Disconnect();
-	mdelay(500);
+#ifdef PIN_USB_PULLUP
+	const Pin usb_dp_pullup = PIN_USB_PULLUP;
+	PIO_Configure(&usb_dp_pullup, 1);
+	PIO_Set(&usb_dp_pullup);
+#endif
+	mdelay(50);
+#ifdef PIN_USB_PULLUP
+	PIO_Clear(&usb_dp_pullup);
+#endif
+
 	USBDFU_Initialize(&dfu_descriptors);
 
 	while (USBD_GetState() < USBD_STATE_CONFIGURED) {

firmware/apps/trace/Makefile

@@ -1,3 +1,3 @@
 C_FILES += $(C_LIBUSB_RT)
 
-C_FILES += card_emu.c cciddriver.c iso7816_4.c iso7816_fidi.c mitm.c mode_cardemu.c mode_ccid.c simtrace_iso7816.c sniffer.c usb.c
+C_FILES += card_emu.c cciddriver.c iso7816_4.c iso7816_fidi.c mitm.c mode_cardemu.c mode_ccid.c simtrace_iso7816.c sniffer.c tc_etu.c usb.c

firmware/apps/triple_play/Makefile

@@ -1,3 +1,3 @@
 C_FILES += $(C_LIBUSB_RT)
 
-C_FILES += card_emu.c iso7816_4.c iso7816_fidi.c mitm.c mode_cardemu.c mode_ccid.c simtrace_iso7816.c sniffer.c usb.c
+C_FILES += card_emu.c iso7816_4.c iso7816_fidi.c mitm.c mode_cardemu.c mode_ccid.c simtrace_iso7816.c sniffer.c tc_etu.c usb.c

firmware/atmel_softpack_libraries/libchip_sam3s/source/USBD_HAL.c

@@ -1672,6 +1672,10 @@ uint8_t USBD_HAL_Halt(uint8_t bEndpoint, uint8_t ctl)
             UDP->UDP_RST_EP |= 1 << bEndpoint;
             UDP->UDP_RST_EP &= ~(1 << bEndpoint);
         }
+
+        /* This fixes a weird bug with regard to ping-pong OUT endpoints */
+        UDP->UDP_RST_EP |= 1 << bEndpoint;
+        UDP->UDP_RST_EP &= ~(1 << bEndpoint);
     }
 
     /* Return Halt status */

firmware/atmel_softpack_libraries/libchip_sam3s/source/exceptions.c

@@ -151,7 +151,8 @@ WEAK void HardFault_Handler( void )
 		" mrseq r0, msp		\n"
 		" mrsne r0, psp		\n"
 		//" ldr r1, [r0, #24] 	\n"
-		" b hard_fault_handler_c\n");
+		" b hard_fault_handler_c\n"
+		".syntax divided	\n");
 }
 
 /**

firmware/atmel_softpack_libraries/libchip_sam3s/source/pio_it.c

@@ -211,16 +211,6 @@ extern void PIO_InitializeInterrupts( uint32_t dwPriority )
     NVIC_EnableIRQ( PIOC_IRQn ) ;
 }
 
-static InterruptSource *find_intsource4pin(const Pin *pPin)
-{
-    unsigned int i ;
-    for (i = 0; i < _dwNumSources; i++) {
-        if (_aIntSources[i].pPin == pPin)
-	    return &_aIntSources[i];
-    }
-    return NULL;
-}
-
 /**
  * Configures a PIO or a group of PIO to generate an interrupt on status
  * change. The provided interrupt handler will be called with the triggering
@@ -238,17 +228,15 @@ extern void PIO_ConfigureIt( const Pin *pPin, void (*handler)( const Pin* ) )
 
     assert( pPin ) ;
     pio = pPin->pio ;
+    assert( _dwNumSources < MAX_INTERRUPT_SOURCES ) ;
 
-    pSource = find_intsource4pin(pPin);
-    if (!pSource) {
-        /* Define new source */
-        TRACE_DEBUG( "PIO_ConfigureIt: Defining new source #%" PRIu32 ".\n\r",  _dwNumSources ) ;
-        assert( _dwNumSources < MAX_INTERRUPT_SOURCES ) ;
-        pSource = &(_aIntSources[_dwNumSources]) ;
-        pSource->pPin = pPin ;
-        _dwNumSources++ ;
-    }
+    /* Define new source */
+    TRACE_DEBUG( "PIO_ConfigureIt: Defining new source #%" PRIu32 ".\n\r",  _dwNumSources ) ;
+
+    pSource = &(_aIntSources[_dwNumSources]) ;
+    pSource->pPin = pPin ;
     pSource->handler = handler ;
+    _dwNumSources++ ;
 
     /* PIO3 with additional interrupt support
      * Configure additional interrupt mode registers */

firmware/atmel_softpack_libraries/usb/device/core/USBD.c

@@ -300,7 +300,7 @@ void USBD_SetConfiguration(uint8_t cfgnum)
     else {
         deviceState = USBD_STATE_ADDRESS;
         /* Reset all endpoints */
-        USBD_HAL_ResetEPs(0xFFFFFFFE, USBD_STATUS_RESET, 0);
+        USBD_HAL_ResetEPs(0xFFFFFFFF, USBD_STATUS_RESET, 0);
     }
 }
 

firmware/atmel_softpack_libraries/usb/device/dfu/dfu.h

@@ -39,8 +39,8 @@ struct dfu_desc {
 #define DFU_FUNC_DESC  {						\
 	.bLength		= USB_DT_DFU_SIZE,			\
 	.bDescriptorType	= USB_DT_DFU,				\
-	.bmAttributes		= USB_DFU_CAN_UPLOAD | USB_DFU_CAN_DOWNLOAD | USB_DFU_WILL_DETACH, \
-	.wDetachTimeOut		= 0x00,				\
+	.bmAttributes		= USB_DFU_CAN_UPLOAD | USB_DFU_CAN_DOWNLOAD, \
+	.wDetachTimeOut		= 0xff00,				\
 	.wTransferSize		= BOARD_DFU_PAGE_SIZE,			\
 	.bcdDFUVersion		= 0x0100,				\
 }

firmware/atmel_softpack_libraries/usb/device/dfu/dfu_runtime.c

@@ -165,8 +165,6 @@ void USBDFU_Runtime_RequestHandler(const USBGenericRequest *request)
 			 * will then trigger DFURT_SwitchToDFU() below */
 			TRACE_DEBUG("\r\n====dfu_detach\n\r");
 			g_dfu->state = DFU_STATE_appDETACH;
-			USBD_Write(0, 0, 0, 0, 0);
-			DFURT_SwitchToDFU();
 			ret = DFU_RET_ZLP;
 			goto out;
 			break;
@@ -211,14 +209,13 @@ out:
 
 void DFURT_SwitchToDFU(void)
 {
-	__disable_irq();
-
 	/* store the magic value that the DFU loader can detect and
 	 * activate itself, rather than boot into the application */
 	g_dfu->magic = USB_DFU_MAGIC;
-	__DMB();
+
 	/* Disconnect the USB by removing the pull-up */
 	USBD_Disconnect();
+	__disable_irq();
 
 	/* reset the processor, we will start execution with the
 	 * ResetVector of the bootloader */

firmware/libboard/common/include/led.h

@@ -31,8 +31,7 @@ enum led_pattern {
 	BLINK_200O_F		= 7,
 	BLINK_600O_F		= 8,
 	BLINK_CUSTOM		= 9,
-	BLINK_2F_O		= 10,
-	BLINK_5O_5F		= 11,
+	BLINK_2F_O,
 	_NUM_LED_BLINK
 };
 

firmware/libboard/common/include/sim_switch.h

@@ -14,13 +14,5 @@
  */
 #pragma once
 
-/** switch card lines to use physical or emulated card
- *  @param[in] nr card interface number (i.e. slot)
- *  @param[in] physical which physical interface to switch to (e.g. 0: physical, 1: virtual)
- *  @return 0 on success, negative else
- */
 int sim_switch_use_physical(unsigned int nr, int physical);
-/** initialise card switching capabilities
- *  @return number of switchable card interfaces
- */
 int sim_switch_init(void);

firmware/libboard/common/resources/sam3s4/dfu.ld

@@ -96,18 +96,13 @@ SECTIONS
         _efixed = .;            /* End of text section */
     } > rom
 
-    /DISCARD/ :
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    PROVIDE_HIDDEN (__exidx_start = .);
+    .ARM.exidx :
     {
-        *(.ARM.exidx)
-    }
-
-    .blupdate :
-    {
-        . = ALIGN(4);
-        _blupdate_start = .;
-        KEEP(*(.fwupdate .fwupdate.*));
-        _blupdate_end = .;
+      *(.ARM.exidx* .gnu.linkonce.armexidx.*)
     } > rom
+    PROVIDE_HIDDEN (__exidx_end = .);
 
     . = ALIGN(4); 
     _etext = .;

firmware/libboard/common/resources/sam3s4/flash.ld

@@ -94,10 +94,13 @@ SECTIONS
         _efixed = .;            /* End of text section */
     } > rom
 
-    /DISCARD/ :
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    PROVIDE_HIDDEN (__exidx_start = .);
+    .ARM.exidx :
     {
-        *(.ARM.exidx)
-    }
+      *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > rom
+    PROVIDE_HIDDEN (__exidx_end = .);
 
     . = ALIGN(4); 
     _etext = .;

firmware/libboard/common/source/board_lowlevel.c

@@ -218,8 +218,3 @@ void mdelay(unsigned int msecs)
 	do {
 	} while ((jiffies - jiffies_start) < msecs);
 }
-
-void abort() {
-	NVIC_SystemReset();
-	while(1) {};
-}

firmware/libboard/common/source/led.c

@@ -58,10 +58,6 @@ static const struct blink_state bs_on[] = {
 	{ 0, 1 }
 };
 
-static const struct blink_state bs_5on_5off[] = {
-	{ 500, 1 }, { 500, 0 }
-};
-
 static const struct blink_state bs_3on_5off[] = {
 	{ 300, 1 }, { 500, 0 }
 };
@@ -111,10 +107,6 @@ static const struct blink_pattern patterns[] = {
 		.states = bs_on,
 		.size = ARRAY_SIZE(bs_on),
 	},
-	[BLINK_5O_5F] = {
-		.states = bs_5on_5off,
-		.size = ARRAY_SIZE(bs_5on_5off),
-	},
 	[BLINK_3O_5F] = {
 		.states = bs_3on_5off,
 		.size = ARRAY_SIZE(bs_3on_5off),

firmware/libboard/ngff_cardem/include/board.h

@@ -1,166 +0,0 @@
-/* Osmocom ngff-cardem board definition
- *
- * (C) 2021 by Harald Welte <laforge@osmocom.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#pragma once
-#include "board_common.h"
-#include "simtrace_usb.h"
-
-/** Name of the board */
-#define BOARD_NAME "NGFF-CARDEM"
-/** Board definition */
-#define ngff_cardem
-
-/** oscillator used as main clock source (in Hz) */
-#define BOARD_MAINOSC 12000000
-/** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */
-#define BOARD_MCK 58000000 // 12.000 * 29 / 6
-
-/** MCU pin connected to red LED */
-#define PIO_LED_RED     PIO_PA17
-/** MCU pin connected to green LED */
-#define PIO_LED_GREEN   PIO_PA18
-/** red LED pin definition */
-#define PIN_LED_RED     {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-/** green LED pin definition */
-#define PIN_LED_GREEN   {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-/** LEDs pin definition */
-#define PINS_LEDS       PIN_LED_RED, PIN_LED_GREEN 
-/** index for red LED in LEDs pin definition array */
-#define LED_NUM_RED     0
-/** index for green LED in LEDs pin definition array */
-#define LED_NUM_GREEN   1
-/** the green LED is actually red and used as indication for USIM1 */
-#define LED_USIM1	LED_GREEN
-
-/* USIM 2 interface (USART) */
-#define PIN_USIM2_CLK		{PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-#define PIN_USIM2_IO		{PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
-#define PINS_ISO7816_USIM2	PIN_USIM2_CLK, PIN_USIM2_IO
-
-/* USIM 2 interface (TC) */
-#define PIN_USIM2_IO_TC		{PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-#define PIN_USIM2_CLK_TC	{PIO_PA4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-#define PINS_TC_USIM2		PIN_USIM2_IO_TC, PIN_USIM2_CLK_TC
-
-/* USIM 1 interface (USART) */
-#define PIN_USIM1_IO		{PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
-#define PIN_USIM1_CLK		{PIO_PA23, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
-#define PINS_ISO7816_USIM1	PIN_USIM1_CLK, PIN_USIM1_IO
-
-/* USIM 1 interface (TC) */
-#define PIN_USIM1_IO_TC		{PIO_PA27, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-#define PIN_USIM1_CLK_TC	{PIO_PA29, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-#define PINS_TC_USIM1		PIN_USIM1_IO_TC, PIN_USIM1_CLK_TC
-
-#define PIN_USIM1_nRST		{PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
-#define PIN_USIM1_VCC		{PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
-
-#define PIN_USIM2_nRST		{PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
-//#define PIN_USIM2_VCC		{PIO_PB2, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
-
-#define PINS_USIM1		PINS_TC_USIM1, PINS_ISO7816_USIM1, PIN_USIM1_nRST
-#define PINS_USIM2		PINS_TC_USIM2, PINS_ISO7816_USIM2, PIN_USIM2_nRST
-
-/* from v3 and onwards only (!) */
-#define PIN_DET_USIM1_PRES	{PIO_PA8, PIOA, ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_IT_EDGE}
-
-/* inputs reading the WWAN LED level */
-#define PIN_WWAN1		{PIO_PA15, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE}
-#define PINS_WWAN_IN		{ PIN_WWAN1 }
-
-#define PIN_MODEM_EN {PIO_PA11, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define PIN_N_MODEM_PWR_ON {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-
-/* outputs controlling RESET input of modems */
-#define PIN_PERST1		{PIO_PA25, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define PINS_PERST		{ PIN_PERST1 }
-
-#define PIN_VERSION_DET		{PIO_PA19, PIOA, ID_PIOA, PIO_PERIPH_D, PIO_DEFAULT}
-
-/* GPIO towards SPDT switches between real SIM and SAM3 */
-//#define PIN_SIM_SWITCH1 {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-//#define PIN_SIM_SWITCH2 {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-
-#define BOARD_USB_BMATTRIBUTES	USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
-
-#define BOARD_USB_VENDOR_ID	USB_VENDOR_OPENMOKO
-#define BOARD_USB_PRODUCT_ID	USB_PRODUCT_NGFF_CARDEM
-#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_NGFF_CARDEM
-#define BOARD_USB_RELEASE	0x010
-
-#define DETECT_VCC_BY_ADC
-#define VCC_UV_THRESH_1V8	1500000
-#define VCC_UV_THRESH_3V	VCC_UV_THRESH_1V8
-
-#ifdef APPLICATION_cardem
-#define HAVE_CARDEM
-#define HAVE_BOARD_CARDINSERT
-struct cardem_inst;
-void board_set_card_insert(struct cardem_inst *ci, bool card_insert);
-#endif
-
-#ifdef APPLICATION_trace
-#define HAVE_SNIFFER
-#endif
-
-/* Card I/O data signal input/output (I/O_SIM in schematic) */
-#define PIN_SIM_IO             {PIO_PA6A_TXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
-/* Card CLK clock input (CLK_SIM in schematic) */
-#define PIN_SIM_CLK            {PIO_PA2B_SCK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-/* Card RST reset signal input (use as input since the phone will drive it) */
-#define PIN_SIM_RST_SNIFF      {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_IT_EDGE}
-/* Pins used to sniff phone-card communication */
-#define PINS_SIM_SNIFF          PIN_SIM_IO, PIN_SIM_CLK, PIN_SIM_RST_SNIFF
-
-/* Pin to measure card I/O timing (to start measuring the ETU on I/O activity; connected I/O_SIM in schematic) */
-#define PIN_SIM_IO_INPUT       {PIO_PA1B_TIOB0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-/* Pin used as clock input (to measure the ETU duration; connected to CLK_SIM in schematic) */
-#define PIN_SIM_CLK_INPUT      {PIO_PA4B_TCLK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-/* Pins used to measure ETU timing (using timer counter) */ 
-#define PINS_TC                 PIN_SIM_IO_INPUT, PIN_SIM_CLK_INPUT
-
-//default state: NO uart connected, modem connected to physical sim, NO sim presence override, modem powers sim slot
-#define pin_conn_usim1_default {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_conn_usim2_default {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_conn_mdm_sim_default {PIO_PA0, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-#define pin_conn_set_sim_det_default {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_en_st_sim_vdd_default {PIO_PB2, PIOB, ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT}
-#define pin_en_mdm_sim_vdd_default {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-
-//cardem state: uart2 (!) connected, NO modem connected to physical sim, sim presence override, NOTHING powers sim slot
-#define pin_conn_usim1_cem {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_conn_usim2_cem {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-#define pin_conn_mdm_sim_cem {PIO_PA0, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_en_st_sim_vdd_cem {PIO_PB2, PIOB, ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT}
-#define pin_en_mdm_sim_vdd_cem {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-
-//trace state: uart2 (!) connected, modem connected to physical sim, st powers sim slot
-#define pin_conn_usim1_trace {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_conn_usim2_trace {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-#define pin_conn_mdm_sim_trace {PIO_PA0, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-#define pin_conn_set_sim_det_trace {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_en_st_sim_vdd_trace {PIO_PB2, PIOB, ID_PIOB, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_en_mdm_sim_vdd_trace {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-
-#define PIN_MODEM_EN_off {PIO_PA11, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-
-#define PINS_SIM_DEFAULT pin_conn_usim1_default, pin_conn_usim2_default, pin_conn_mdm_sim_default, pin_conn_set_sim_det_default, PIN_N_MODEM_PWR_ON, PIN_MODEM_EN, pin_en_st_sim_vdd_default, pin_en_mdm_sim_vdd_default
-#define PINS_SIM_CARDEM pin_conn_usim1_cem, pin_conn_usim2_cem, pin_conn_mdm_sim_cem, pin_en_mdm_sim_vdd_cem, pin_en_st_sim_vdd_cem// , pin_conn_set_sim_det_cem
-
-#define PINS_BUS_SNIFF pin_conn_usim1_trace, pin_conn_usim2_trace, pin_conn_mdm_sim_trace, pin_conn_set_sim_det_trace,PIN_MODEM_EN_off
-#define PINS_PWR_SNIFF PIN_N_MODEM_PWR_ON, PIN_MODEM_EN, pin_en_st_sim_vdd_trace, pin_en_mdm_sim_vdd_trace

firmware/libboard/ngff_cardem/include/card_pres.h

@@ -1,22 +0,0 @@
-/* card presence utilities
- *
- * (C) 2016-2017 by Harald Welte <hwelte@hmw-consulting.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#pragma once
-
-int is_card_present(int port);
-int card_present_init(void);

firmware/libboard/ngff_cardem/include/wwan_led.h

@@ -1,20 +0,0 @@
-/* Code to read/track the status of the WWAN LEDs of attached modems
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#pragma once
-
-int wwan_led_active(int wwan);
-int wwan_led_init(void);

firmware/libboard/ngff_cardem/include/wwan_perst.h

@@ -1,21 +0,0 @@
-/* Code to control the PERST lines of attached modems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#pragma once
-
-int wwan_perst_set(int modem_nr, int active);
-int wwan_perst_do_reset_pulse(int modem_nr, unsigned int duration_ms);
-int wwan_perst_init(void);

firmware/libboard/ngff_cardem/product_string.txt

@@ -1 +0,0 @@
-ngff-cardem

firmware/libboard/ngff_cardem/source/board_ngff_cardem.c

@@ -1,159 +0,0 @@
-/* sysmocom ngff-cardem application code
- *
- * (C) 2021 Harald Welte <laforge@osmocom.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#include "board.h"
-#include "simtrace.h"
-#include "utils.h"
-#include "led.h"
-#include "wwan_led.h"
-#include "wwan_perst.h"
-#include "sim_switch.h"
-#include "boardver_adc.h"
-#include "card_pres.h"
-#include <osmocom/core/timer.h>
-#include "usb_buf.h"
-
-/* array of generated USB Strings */
-extern unsigned char *usb_strings[];
-
-/* returns '1' in case we should break any endless loop */
-void board_exec_dbg_cmd(int ch)
-{
-	switch (ch) {
-	case '?':
-		printf("\t?\thelp\n\r");
-		printf("\tR\treset SAM3\n\r");
-		printf("\tl\tswitch off LED 1\n\r");
-		printf("\tL\tswitch on  LED 1\n\r");
-		printf("\tg\tswitch off LED 2\n\r");
-		printf("\tG\tswitch on  LED 2\n\r");
-		printf("\t1\tGenerate 1ms reset pulse on WWAN1\n\r");
-		printf("\t!\tSwitch Channel A from physical -> remote\n\r");
-		printf("\tt\t(pseudo)talloc report\n\r");
-		break;
-	case 'R':
-		printf("Asking NVIC to reset us\n\r");
-		USBD_Disconnect();
-		NVIC_SystemReset();
-		break;
-	case 'l':
-		led_blink(LED_GREEN, BLINK_ALWAYS_OFF);
-		printf("LED 1 switched off\n\r");
-		break;
-	case 'L':
-		led_blink(LED_GREEN, BLINK_ALWAYS_ON);
-		printf("LED 1 switched on\n\r");
-		break;
-	case 'g':
-		led_blink(LED_RED, BLINK_ALWAYS_OFF);
-		printf("LED 2 switched off\n\r");
-		break;
-	case 'G':
-		led_blink(LED_RED, BLINK_ALWAYS_ON);
-		printf("LED 2 switched on\n\r");
-		break;
-	case '1':
-		printf("Resetting Modem\n\r");
-		wwan_perst_do_reset_pulse(0, 300);
-		break;
-	case '!':
-		sim_switch_use_physical(0, 0);
-		break;
-	case 't':
-		talloc_report(NULL, stdout);
-		break;
-	default:
-		printf("Unknown command '%c'\n\r", ch);
-		break;
-	}
-}
-
-void board_main_top(void)
-{
-#ifndef APPLICATION_dfu
-	usb_buf_init();
-
-	wwan_led_init();
-	wwan_perst_init();
-	sim_switch_init();
-#endif
-
-	/* Obtain the circuit board version (currently just prints voltage) */
-	get_board_version_adc();
-#ifndef APPLICATION_dfu
-	/* Initialize checking for card insert/remove events */
-	card_present_init();
-#endif
-	wwan_perst_set(0, 0);
-}
-
-static int uart_has_loopback_jumper(void)
-{
-	unsigned int i;
-	const Pin uart_loopback_pins[] = {
-		{PIO_PA9A_URXD0, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT},
-		{PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-	};
-
-	/* Configure UART pins as I/O */
-	PIO_Configure(uart_loopback_pins, PIO_LISTSIZE(uart_loopback_pins));
-
-	/* Send pattern over UART TX and check if it is received on RX
-	 * If the loop doesn't get interrupted, RxD always follows TxD and thus a
-	 * loopback jumper has been placed on RxD/TxD, and we will boot
-	 * into DFU unconditionally
-	 */
-	int has_loopback_jumper = 1;
-	for (i = 0; i < 10; i++) {
-		/* Set TxD high; abort if RxD doesn't go high either */
-		PIO_Set(&uart_loopback_pins[1]);
-		if (!PIO_Get(&uart_loopback_pins[0])) {
-			has_loopback_jumper = 0;
-			break;
-		}
-		/* Set TxD low, abort if RxD doesn't go low either */
-		PIO_Clear(&uart_loopback_pins[1]);
-		if (PIO_Get(&uart_loopback_pins[0])) {
-			has_loopback_jumper = 0;
-			break;
-		}
-	}
-
-	/* Put pins back to UART mode */
-	const Pin uart_pins[] = {PINS_UART};
-	PIO_Configure(uart_pins, PIO_LISTSIZE(uart_pins));
-
-	return has_loopback_jumper;
-}
-
-int board_override_enter_dfu(void)
-{
-	/* If the loopback jumper is set, we enter DFU mode */
-	if (uart_has_loopback_jumper())
-		return 1;
-
-	return 0;
-}
-
- static const Pin deton = {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT};
- static const Pin detoff = {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT};
-
-void board_set_card_insert(struct cardem_inst *ci, bool card_insert)
-{
-	PIO_Configure(card_insert ? &deton : &detoff, 1);
-}

firmware/libboard/ngff_cardem/source/card_pres.c

@@ -1,76 +0,0 @@
-/* card presence utilities
- *
- * (C) 2016-2021 by Harald Welte <hwelte@hmw-consulting.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#include <osmocom/core/timer.h>
-#include "board.h"
-#include "utils.h"
-#include "card_pres.h"
-
-#define NUM_CARDPRES	1
-
-#define TIMER_INTERVAL_MS	500
-
-static const Pin pin_cardpres[NUM_CARDPRES] = { PIN_DET_USIM1_PRES };
-static int last_state[NUM_CARDPRES] = { -1 };
-static struct osmo_timer_list cardpres_timer;
-
-/* Determine if a SIM card is present in the given slot */
-int is_card_present(int port)
-{
-	const Pin *pin;
-	int present;
-
-	if (port < 0 || port >= NUM_CARDPRES)
-		return -1;
-	pin = &pin_cardpres[port];
-
-
-	/* high active here */
-	present = PIO_Get(pin);
-
-	return present;
-}
-
-static void cardpres_tmr_cb(void *data)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(pin_cardpres); i++) {
-		int state = is_card_present(i);
-		if (state != last_state[i]) {
-			TRACE_INFO("%u: Card Detect Status %d -> %d\r\n", i, last_state[i], state);
-			/* FIXME: report to USB host */
-			last_state[i] = state;
-		}
-	}
-
-	osmo_timer_schedule(&cardpres_timer, 0, TIMER_INTERVAL_MS*1000);
-}
-
-int card_present_init(void)
-{
-	unsigned int i;
-
-	PIO_Configure(pin_cardpres, ARRAY_SIZE(pin_cardpres));
-
-	/* start timer */
-	cardpres_timer.cb = cardpres_tmr_cb;
-	osmo_timer_schedule(&cardpres_timer, 0, TIMER_INTERVAL_MS*1000);
-
-	return 2;
-}

firmware/libboard/ngff_cardem/source/sim_switch.c

@@ -1,81 +0,0 @@
-/* Code to switch between local (physical) and remote (emulated) SIM
- *
- * (C) 2015-2017 by Harald Welte <hwelte@hmw-consulting.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#include "board.h"
-#include "trace.h"
-#include "led.h"
-#include "sim_switch.h"
-
-//uart12bus	2-20e pa20
-//uart22bus	1-20e pa28
-//usim2bus	1-10e pa0  pivot
-//sim det	2-10e pa13
-
-static const Pin pins_default[]	= {PINS_SIM_DEFAULT};
-static const Pin pins_cem[]	= {PINS_SIM_CARDEM};
-
-static int initialized = 0;
-
-int sim_switch_use_physical(unsigned int nr, int physical)
-{
-	const Pin pin = PIN_MODEM_EN;// PIN_N_MODEM_PWR_ON;
-	enum led led;
-
-	if (!initialized) {
-		TRACE_ERROR("Somebody forgot to call sim_switch_init()\r\n");
-		sim_switch_init();
-	}
-
-	TRACE_INFO("Modem %d: %s SIM\n\r", nr,
-		   physical ? "physical" : "virtual");
-
-	switch (nr) {
-	case 0:
-		led = LED_USIM1;
-		break;
-
-	default:
-		TRACE_ERROR("Invalid SIM%u\n\r", nr);
-		return -1;
-	}
-
-	if (physical) {
-		TRACE_INFO("%u: Use local/physical SIM\r\n", nr);
-		PIO_Configure(pins_default, PIO_LISTSIZE(pins_default));
-		led_blink(led, BLINK_ALWAYS_ON);
-	} else {
-		TRACE_INFO("%u: Use remote/emulated SIM\r\n", nr);
-		PIO_Configure(pins_cem, PIO_LISTSIZE(pins_cem));
-		led_blink(led, BLINK_5O_5F);
-	}
-
-	/* just power cycle the modem because this circumvents weird issues with unreliable signals */
-	PIO_Clear(&pin);
-	mdelay(200);
-	PIO_Set(&pin);
-
-
-	return 0;
-}
-
-int sim_switch_init(void)
-{
-	PIO_Configure(pins_default, PIO_LISTSIZE(pins_default));
-	initialized = 1;
-	return 1;
-}

firmware/libboard/ngff_cardem/source/wwan_led.c

@@ -1,93 +0,0 @@
-/* Code to read/track the status of the WWAN LEDs of attached modems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-/* Depending on the board this is running on,  it might be possible
- * for the controller to read the status of the WWAN LED output lines of
- * the cellular modem.  If the board supports this, it sets the
- * PIN_WWAN1 and/or PIN_WWAN2 defines in its board.h file.
- */
-#include "board.h"
-#include "wwan_led.h"
-
-#ifdef PIN_WWAN1
-static const Pin pin_wwan1 = PIN_WWAN1;
-
-static void wwan1_irqhandler(const Pin *pPin)
-{
-	int active = wwan_led_active(0);
-
-	TRACE_INFO("0: WWAN LED %u\r\n", active);
-
-	/* TODO: notify host via USB */
-}
-#endif
-
-#ifdef PIN_WWAN2
-static const Pin pin_wwan2 = PIN_WWAN2;
-
-static void wwan2_irqhandler(const Pin *pPin)
-{
-	int active = wwan_led_active(1);
-	TRACE_INFO("1: WWAN LED %u\r\n", active);
-
-	/* TODO: notify host via USB */
-}
-#endif
-
-/* determine if a given WWAN led is currently active or not */
-int wwan_led_active(int wwan)
-{
-	const Pin *pin;
-	int active;
-
-	switch (wwan) {
-#ifdef PIN_WWAN1
-	case 0:
-		pin = &pin_wwan1;
-		break;
-#endif
-#ifdef PIN_WWAN2
-	case 1:
-		pin = &pin_wwan2;
-		break;
-#endif
-	default:
-		return -1;
-	}
-
-	active = PIO_Get(pin) ? 0 : 1;
-	return active;
-}
-
-int wwan_led_init(void)
-{
-	int num_leds = 0;
-
-#ifdef PIN_WWAN1
-	PIO_Configure(&pin_wwan1, 1);
-	PIO_ConfigureIt(&pin_wwan1, wwan1_irqhandler);
-	PIO_EnableIt(&pin_wwan1);
-	num_leds++;
-#endif
-
-#ifdef PIN_WWAN2
-	PIO_Configure(&pin_wwan2, 1);
-	PIO_ConfigureIt(&pin_wwan2, wwan2_irqhandler);
-	PIO_EnableIt(&pin_wwan2);
-	num_leds++;
-#endif
-	return num_leds;
-}

firmware/libboard/ngff_cardem/source/wwan_perst.c

@@ -1,127 +0,0 @@
-/* Code to control the PERST lines of attached modems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-/* Depending on the board this is running on,  it might be possible
- * for the controller to set the status of the PERST input line of
- * the cellular modem.  If the board supports this, it sets the
- * PIN_PERST1 and/or PIN_PERST2 defines in its board.h file.
- */
-#include "board.h"
-#include "trace.h"
-#include "wwan_perst.h"
-#include <osmocom/core/timer.h>
-
-struct wwan_perst {
-	uint8_t idx;
-	const Pin pin;
-	struct osmo_timer_list timer;
-};
-
-#ifdef PIN_PERST1
-static struct wwan_perst perst1 = {
-	.idx = 0,
-	.pin = PIN_PERST1,
-};
-#endif
-
-#ifdef PIN_PERST2
-static struct wwan_perst perst2 = {
-	.idx = 1,
-	.pin = PIN_PERST2,
-};
-#endif
-
-static int initialized = 0;
-
-static void perst_tmr_cb(void *data)
-{
-	struct wwan_perst *perst = data;
-	/* release the (low-active) reset */
-	TRACE_INFO("%u: De-asserting modem reset\r\n", perst->idx);
-	PIO_Clear(&perst->pin);
-}
-
-static struct wwan_perst *get_perst_for_modem(int modem_nr)
-{
-	if (!initialized) {
-		TRACE_ERROR("Somebody forgot to call wwan_perst_init()\r\n");
-		wwan_perst_init();
-	}
-
-	switch (modem_nr) {
-#ifdef PIN_PERST1
-	case 0:
-		return &perst1;
-#endif
-#ifdef PIN_PERST2
-	case 1:
-		return &perst2;
-#endif
-	default:
-		return NULL;
-	}
-}
-
-int wwan_perst_do_reset_pulse(int modem_nr, unsigned int duration_ms)
-{
-	struct wwan_perst *perst = get_perst_for_modem(modem_nr);
-	if (!perst)
-		return -1;
-
-	TRACE_INFO("%u: Asserting modem reset\r\n", modem_nr);
-	PIO_Set(&perst->pin);
-	osmo_timer_schedule(&perst->timer, duration_ms/1000, (duration_ms%1000)*1000);
-
-	return 0;
-}
-
-int wwan_perst_set(int modem_nr, int active)
-{
-	struct wwan_perst *perst = get_perst_for_modem(modem_nr);
-	if (!perst)
-		return -1;
-
-	osmo_timer_del(&perst->timer);
-	if (active) {
-		TRACE_INFO("%u: Asserting modem reset\r\n", modem_nr);
-		PIO_Set(&perst->pin);
-	} else {
-		TRACE_INFO("%u: De-asserting modem reset\r\n", modem_nr);
-		PIO_Clear(&perst->pin);
-	}
-
-	return 0;
-}
-
-int wwan_perst_init(void)
-{
-	int num_perst = 0;
-#ifdef PIN_PERST1
-	PIO_Configure(&perst1.pin, 1);
-	perst1.timer.cb = perst_tmr_cb;
-	perst1.timer.data = (void *) &perst1;
-	num_perst++;
-#endif
-
-#ifdef PIN_PERST2
-	PIO_Configure(&perst2.pin, 1);
-	perst2.timer.cb = perst_tmr_cb;
-	perst2.timer.data = (void *) &perst2;
-	num_perst++;
-#endif
-	initialized = 1;
-	return num_perst;
-}

firmware/libboard/octsimtest/include/board.h

@@ -50,28 +50,81 @@
 /* Button to force bootloader start (shorted to ground when pressed */
 #define PIN_BOOTLOADER_SW      {PIO_PA5, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP}
 
+//FIXME SIM_PWEN_PIN collides with PA5/bootloader_sw on octsimtest
+/* Enable powering the card using the second 3.3 V output of the LDO (active high) */
+#define SIM_PWEN_PIN           {PIO_PA12, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/* Enable powering the SIM card */
+#define PWR_PINS                SIM_PWEN_PIN
+
 // FIXME PA8 is 32khz xtal on octsimtest
+/* Card presence pin */
+#define SW_SIM                  PIO_PA11
 /* Pull card presence pin high (shorted to ground in card slot when card is present) */
+#define SMARTCARD_CONNECT_PIN  {SW_SIM, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_DEGLITCH | PIO_IT_EDGE }
+
+/** Smart card connection **/
+//FIXME
+/* Card RST reset signal input (active low; RST_SIM in schematic) */
+#define PIN_SIM_RST            {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+/* Card I/O data signal input/output (I/O_SIM in schematic) */
+#define PIN_SIM_IO             {PIO_PA6A_TXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+/* Card CLK clock input (CLK_SIM in schematic) */
+#define PIN_SIM_CLK            {PIO_PA2B_SCK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+/* Pin to measure card I/O timing (to start measuring the ETU on I/O activity; connected I/O_SIM in schematic) */
+#define PIN_SIM_IO_INPUT       {PIO_PA1B_TIOB0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+//FIXME PIO_PA4B_TCLK0 PA4 is LED on octsimtest
+/* Pin used as clock input (to measure the ETU duration; connected to CLK_SIM in schematic) */
+#define PIN_SIM_CLK_INPUT      {PIO_PA14, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+/* Pins used to measure ETU timing (using timer counter) */ 
+#define PINS_TC                 PIN_SIM_IO_INPUT, PIN_SIM_CLK_INPUT
 
 /** Phone connection **/
 /* Phone USIM slot 1 VCC pin (VCC_PHONE in schematic) */
 #define PIN_USIM1_VCC          {PIO_PA25, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
 /* Phone USIM slot 1 RST pin (active low; RST_PHONE in schematic) */
-#define PIN_USIM1_nRST         {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_IT_EDGE | PIO_DEGLITCH }
+#define PIN_USIM1_nRST         {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_IT_RISE_EDGE | PIO_DEGLITCH }
 /* Phone I/O data signal input/output (I/O_PHONE in schematic) */
 #define PIN_PHONE_IO           {PIO_PA22A_TXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
 /* Phone CLK clock input (CLK_PHONE in schematic) */
 #define PIN_PHONE_CLK          {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
-/* Pin used to switch level shifter in I/O line between rx (0) and tx (1) */
-#define PIN_USIM1_IO_DIR	{PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
 /* Pin used for phone USIM slot 1 communication */
-#define PINS_USIM1              PIN_PHONE_IO, PIN_PHONE_CLK, PIN_PHONE_CLK_INPUT, PIN_USIM1_VCC, PIN_PHONE_IO_INPUT, PIN_USIM1_nRST, PIN_USIM1_IO_DIR
+#define PINS_USIM1              PIN_PHONE_IO, PIN_PHONE_CLK, PIN_PHONE_CLK_INPUT, PIN_USIM1_VCC, PIN_PHONE_IO_INPUT, PIN_USIM1_nRST
 /* Phone I/O data signal input/output (unused USART RX input; connected to I/O_PHONE in schematic) */
 #define PIN_PHONE_IO_INPUT     {PIO_PA21A_RXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
 /* Pin used as clock input (to measure the ETU duration; connected to CLK_PHONE in schematic) */
 #define PIN_PHONE_CLK_INPUT    {PIO_PA29B_TCLK2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
 
 /** Default pin configuration **/
+/* Disconnect VPP, CLK, and RST lines between card and phone using bus switch (high sets bus switch to high-impedance) */
+#define PIN_SC_SW_DEFAULT      {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/* Disconnect I/O line between card and phone using bus switch (high sets bus switch to high-impedance) */
+#define PIN_IO_SW_DEFAULT      {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/* Disconnect all lines (VPP, CLK, RST, and I/O) between card and phone */
+#define PINS_BUS_DEFAULT        PIN_SC_SW_DEFAULT, PIN_IO_SW_DEFAULT
+
+/** Sniffer configuration **/
+/* Connect VPP, CLK, and RST lines between card and phone using bus switch (low connects signals on bus switch) */
+#define PIN_SC_SW_SNIFF        {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+/* Connect I/O line between card and phone using bus switch (low connects signals on bus switch) */
+#define PIN_IO_SW_SNIFF        {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+/* Connect all lines (VPP, CLK, RST, and I/O) between card and phone */
+#define PINS_BUS_SNIFF          PIN_SC_SW_SNIFF, PIN_IO_SW_SNIFF
+/* Card RST reset signal input (use as input since the phone will drive it) */
+#define PIN_SIM_RST_SNIFF      {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_IT_EDGE}
+/* Pins used to sniff phone-card communication */
+#define PINS_SIM_SNIFF          PIN_SIM_IO, PIN_SIM_CLK, PIN_SIM_RST_SNIFF
+/* Disable power converter 4.5-6V to 3.3V (active high) */
+#define PIN_SIM_PWEN_SNIFF     {SIM_PWEN, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+/* Enable power switch to forward VCC_PHONE to VCC_SIM (active high) */
+#define PIN_VCC_FWD_SNIFF      {VCC_FWD, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/* Use phone VCC to power card */
+#define PINS_PWR_SNIFF          PIN_SIM_PWEN_SNIFF, PIN_VCC_FWD_SNIFF
+
+/** CCID configuration */
+/* Card RST reset signal input (active low; RST_SIM in schematic) */
+#define PIN_ISO7816_RSTMC      {PIO_PA7, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+/* ISO7816-communication related pins */
+#define PINS_ISO7816            PIN_SIM_IO,  PIN_SIM_CLK,  PIN_ISO7816_RSTMC // SIM_PWEN_PIN, PIN_SIM_IO2, PIN_SIM_CLK2
 
 /** External SPI flash interface   **/
 /* SPI MISO pin definition */
@@ -87,36 +140,30 @@
 /* SPI flash write protect pin (active low, pulled low) */
 #define PIN_SPI_WP    {PA15, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
 
+/** Pin configuration to control USB pull-up on D+
+ *  @details the USB pull-up on D+ is enable by default on the board but can be disabled by setting PA16 high
+ */
+#define PIN_USB_PULLUP  {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+
 /** USB definitions */
 /* OpenMoko SIMtrace 2 USB vendor ID */
 #define BOARD_USB_VENDOR_ID	USB_VENDOR_OPENMOKO
 /* OpenMoko SIMtrace 2 USB product ID (main application/runtime mode) */
-#define BOARD_USB_PRODUCT_ID	USB_PRODUCT_OCTSIMTEST
+#define BOARD_USB_PRODUCT_ID	USB_PRODUCT_SIMTRACE2
 /* OpenMoko SIMtrace 2 DFU USB product ID (DFU bootloader/DFU mode) */
-#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_OCTSIMTEST
+#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_SIMTRACE2_DFU
 /* USB release number (bcdDevice, shown as 0.00) */
 #define BOARD_USB_RELEASE	0x000
 /* Indicate SIMtrace is bus power in USB attributes */
 #define BOARD_USB_BMATTRIBUTES	USBConfigurationDescriptor_BUSPOWERED_NORWAKEUP
 
-#define DETECT_VCC_BY_ADC
-/* we have a resistive voltage divider of 47 + 30 kOhms to also detect 5V supply power */
-#define VCC_UV_THRESH_1V8	(1500000*47)/(47+30)
-#define VCC_UV_THRESH_3V	(2500000*47)/(47+30)
-
-#define HAVE_SLOT_MUX
-
-#define HAVE_BOARD_CARDINSERT
-struct cardem_inst;
-void board_set_card_insert(struct cardem_inst *ci, bool card_insert);
-
 /** Supported modes */
 /* SIMtrace board supports sniffer mode */
 //#define HAVE_SNIFFER
 /* SIMtrace board supports CCID mode */
 //#define HAVE_CCID
 /* SIMtrace board supports card emulation mode */
-#define HAVE_CARDEM
+//#define HAVE_CARDEM
 /* SIMtrace board supports man-in-the-middle mode */
 //#define HAVE_MITM
 /* octsimtest board supports gpio_test mode */

firmware/libboard/octsimtest/include/mcp23017.h

@@ -18,10 +18,8 @@
 
 #define MCP23017_ADDRESS 0x20
 
-int mcp23017_init(uint8_t slave, uint8_t iodira, uint8_t iodirb);
+int mcp23017_init(uint8_t slave);
 int mcp23017_test(uint8_t slave);
 int mcp23017_toggle(uint8_t slave);
-int mcp23017_set_output_a(uint8_t slave, uint8_t val);
-int mcp23017_set_output_b(uint8_t slave, uint8_t val);
 //int mcp23017_write_byte(uint8_t slave, uint8_t addr, uint8_t byte);
 //int mcp23017_read_byte(uint8_t slave, uint8_t addr);

firmware/libboard/octsimtest/include/mux.h

@@ -1,17 +0,0 @@
-#pragma once
-
-void mux_init(void);
-int mux_set_slot(uint8_t s);
-int mux_get_slot(void);
-void mux_set_freq(uint8_t s);
-
-/* this reflects the wiring between U5 and U4 */
-#define MUX_FREQ_DIV_2		0
-#define MUX_FREQ_DIV_4		1
-#define MUX_FREQ_DIV_16		2
-#define MUX_FREQ_DIV_32		3
-#define MUX_FREQ_DIV_32		3
-#define MUX_FREQ_DIV_128	4
-#define MUX_FREQ_DIV_512	5
-#define MUX_FREQ_DIV_2048	6
-#define MUX_FREQ_DIV_4096	7

firmware/libboard/octsimtest/source/board_octsimtest.c

@@ -17,7 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
  */
-#include <stdbool.h>
 #include "board.h"
 #include "simtrace.h"
 #include "utils.h"
@@ -26,29 +25,16 @@
 #include "usb_buf.h"
 #include "i2c.h"
 #include "mcp23017.h"
-#include "mux.h"
-
-static bool mcp2317_present = false;
 
 void board_exec_dbg_cmd(int ch)
 {
 	switch (ch) {
 	case '?':
 		printf("\t?\thelp\n\r");
-		printf("\t0-8\tselect physical SIM slot\n\r");
 		printf("\tR\treset SAM3\n\r");
 		printf("\tm\trun mcp23017 test\n\r");
-		printf("\ti\tset card insert via I2C\n\r");
-		printf("\tI\tdisable card insert\n\r");
+		printf("\tR\ttoggle MSB of gpio on mcp23017\n\r");
 		break;
-	case '0': mux_set_slot(0); break;
-	case '1': mux_set_slot(1); break;
-	case '2': mux_set_slot(2); break;
-	case '3': mux_set_slot(3); break;
-	case '4': mux_set_slot(4); break;
-	case '5': mux_set_slot(5); break;
-	case '6': mux_set_slot(6); break;
-	case '7': mux_set_slot(7); break;
 	case 'R':
 		printf("Asking NVIC to reset us\n\r");
 		USBD_Disconnect();
@@ -57,13 +43,8 @@ void board_exec_dbg_cmd(int ch)
 	case 'm':
 		mcp23017_test(MCP23017_ADDRESS);
 		break;
-	case 'i':
-		printf("Setting card insert (slot=%u)\r\n", mux_get_slot());
-		mcp23017_set_output_a(MCP23017_ADDRESS, (1 << mux_get_slot()));
-		break;
-	case 'I':
-		printf("Releasing card insert (slot=%u)\r\n", mux_get_slot());
-		mcp23017_set_output_a(MCP23017_ADDRESS, 0);
+	case 't':
+		mcp23017_toggle(MCP23017_ADDRESS);
 		break;
 	default:
 		printf("Unknown command '%c'\n\r", ch);
@@ -76,13 +57,9 @@ void board_main_top(void)
 #ifndef APPLICATION_dfu
 	usb_buf_init();
 
-	mux_init();
 	i2c_pin_init();
-	/* PORT A: all outputs, Port B0 output, B1..B7 unused */
-	if (mcp23017_init(MCP23017_ADDRESS, 0x00, 0xfe) == 0) {
-		mcp2317_present = true;
-		mcp23017_set_output_a(MCP23017_ADDRESS, 0);
-	}
+	if (!mcp23017_init(MCP23017_ADDRESS))
+		printf("mcp23017 not found!\n\r");
 	/* Initialize checking for card insert/remove events */
 	//card_present_init();
 #endif
@@ -102,23 +79,3 @@ int board_override_enter_dfu(void)
 	} else
 		return 0;
 }
-
-void board_set_card_insert(struct cardem_inst *ci, bool card_insert)
-{
-	int s = mux_get_slot();
-
-	/* A0 .. A7 of the MCP are each connected to the gate of a FET which closes
-	 * the sim-present signal of the respective slot */
-
-	if (mcp2317_present) {
-		if (card_insert) {
-			/* we must enable card-presence of the active slot and disable it on all others */
-			mcp23017_set_output_a(MCP23017_ADDRESS, (1 << s));
-		} else {
-			/* we disable all card insert signals */
-			mcp23017_set_output_a(MCP23017_ADDRESS, 0);
-		}
-	} else {
-		TRACE_WARNING("No MCP23017 present; cannot set CARD_INSERT\r\n");
-	}
-}

firmware/libboard/octsimtest/source/mcp23017.c

@@ -92,25 +92,19 @@ out_stop:
 		return 0;
 }
 
-int mcp23017_init(uint8_t slave, uint8_t iodira, uint8_t iodirb)
+int mcp23017_init(uint8_t slave)
 {
-	TRACE_DEBUG("mcp23017_init\n\r");
-
+	printf("mcp23017_init\n\r");
 	// all gpio input
-	if (mcp23017_write_byte(slave, MCP23017_IODIRA, iodira))
-		goto out_err;
+	if (mcp23017_write_byte(slave, MCP23017_IODIRA, 0xff))
+		return false;
 	// msb of portb output, rest input
-	if (mcp23017_write_byte(slave, MCP23017_IODIRB, iodirb))
-		goto out_err;
+	if (mcp23017_write_byte(slave, MCP23017_IODIRB, 0x7f))
+		return false;
 	if (mcp23017_write_byte(slave, MCP23017_IOCONA, 0x20)) //disable SEQOP (autoinc addressing)
-		goto out_err;
-
-	TRACE_DEBUG("mcp23017 found\n\r");
-	return 0;
-
-out_err:
-	TRACE_WARNING("mcp23017 NOT found!\n\r");
-	return -1;
+		return false;
+	printf("mcp23017 found\n\r");
+	return true;
 }
 
 int mcp23017_test(uint8_t slave)
@@ -126,16 +120,6 @@ int mcp23017_test(uint8_t slave)
 	return 0;
 }
 
-int mcp23017_set_output_a(uint8_t slave, uint8_t val)
-{
-	return mcp23017_write_byte(slave, MCP23017_OLATA, val);
-}
-
-int mcp23017_set_output_b(uint8_t slave, uint8_t val)
-{
-	return mcp23017_write_byte(slave, MCP23017_OLATB, val);
-}
-
 int mcp23017_toggle(uint8_t slave)
 {
 	// example writing MSB of gpio

firmware/libboard/octsimtest/source/mux.c

@@ -1,113 +0,0 @@
-/* sysmoOCTSIMTEST support for multiplexers
- *
- * (C) 2021 by Harald Welte <laforge@gnumonks.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-
-#include "board.h"
-#include "mux.h"
-#include <stdbool.h>
-#include <errno.h>
-
-/* 3-bit S0..S2 signal for slot selection */
-static const Pin pin_in_sel[3] = {
-	{ PIO_PA1, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
-	{ PIO_PA2, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
-	{ PIO_PA3, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
-};
-
-/* 3-bit S0..S2 signal for frequency divider selection */
-static const Pin pin_freq_sel[3] = {
-	{ PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
-	{ PIO_PA17, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
-	{ PIO_PA18, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
-};
-
-/* low-active output enable for all muxes */
-static const Pin pin_oe = { PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT };
-
-static uint8_t g_mux_slot = 0;
-
-/* initialize the external 1:8 multiplexers */
-void mux_init(void)
-{
-	PIO_Configure(&pin_oe, PIO_LISTSIZE(pin_oe));
-	PIO_Configure(pin_in_sel, PIO_LISTSIZE(pin_in_sel));
-	PIO_Configure(pin_freq_sel, PIO_LISTSIZE(pin_freq_sel));
-
-	mux_set_slot(0);
-}
-
-/* set the slot selection mux */
-int mux_set_slot(uint8_t s)
-{
-	TRACE_INFO("%s(%u)\r\n", __func__, s);
-
-	if (s > 7)
-		return -EINVAL;
-
-	/* !OE = H: disconnect input and output of muxes */
-	PIO_Set(&pin_oe);
-
-	if (s & 1)
-		PIO_Set(&pin_in_sel[0]);
-	else
-		PIO_Clear(&pin_in_sel[0]);
-	if (s & 2)
-		PIO_Set(&pin_in_sel[1]);
-	else
-		PIO_Clear(&pin_in_sel[1]);
-	if (s & 4)
-		PIO_Set(&pin_in_sel[2]);
-	else
-		PIO_Clear(&pin_in_sel[2]);
-
-	/* !OE = L: (re-)enable the output of muxes */
-	PIO_Clear(&pin_oe);
-
-	g_mux_slot = s;
-	return s;
-}
-
-int mux_get_slot(void)
-{
-	return g_mux_slot;
-}
-
-/* set the frequency divider mux */
-void mux_set_freq(uint8_t s)
-{
-	TRACE_INFO("%s(%u)\r\n", __func__, s);
-
-	/* no need for 'break before make' here, this would also affect
-	 * the SIM card I/O signals which we don't want to disturb */
-
-	if (s & 1)
-		PIO_Set(&pin_freq_sel[0]);
-	else
-		PIO_Clear(&pin_freq_sel[0]);
-	if (s & 2)
-		PIO_Set(&pin_freq_sel[1]);
-	else
-		PIO_Clear(&pin_freq_sel[1]);
-	if (s & 4)
-		PIO_Set(&pin_freq_sel[2]);
-	else
-		PIO_Clear(&pin_freq_sel[2]);
-
-	/* !OE = L: ensure enable the output of muxes */
-	PIO_Clear(&pin_oe);
-}

firmware/libboard/octsimtest/source/sim_switch.c

@@ -1,37 +0,0 @@
-/* Code to switch between local (physical) and remote (emulated) SIM
- *
- * (C) 2021 by Harald Welte <hwelte@hmw-consulting.de>
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#include "board.h"
-#include "trace.h"
-#include "sim_switch.h"
-
-int sim_switch_use_physical(unsigned int nr, int physical)
-{
-	if (physical) {
-		TRACE_ERROR("%u: Use local/physical SIM - UNSUPPORTED!\r\n", nr);
-	} else {
-		TRACE_INFO("%u: Use remote/emulated SIM\r\n", nr);
-	}
-
-	return 0;
-}
-
-int sim_switch_init(void)
-{
-	return 1; // SIMtrace hardware has only one switchable interface
-}

firmware/libboard/qmod/include/board.h

@@ -109,9 +109,6 @@
 #define BOARD_USB_RELEASE	0x010
 
 #define CARDEMU_SECOND_UART
-
 #define DETECT_VCC_BY_ADC
-#define VCC_UV_THRESH_1V8	1500000
-#define VCC_UV_THRESH_3V	2500000
 
 #define HAVE_CARDEM

firmware/libboard/qmod/source/sim_switch.c

@@ -1,90 +0,0 @@
-/* Code to switch between local (physical) and remote (emulated) SIM
- *
- * (C) 2015-2017 by Harald Welte <hwelte@hmw-consulting.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#include "board.h"
-#include "trace.h"
-#include "led.h"
-#include "sim_switch.h"
-
-#ifdef PIN_SIM_SWITCH1
-static const Pin pin_conn_usim1 = {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT};
-#endif
-#ifdef PIN_SIM_SWITCH2
-static const Pin pin_conn_usim2 = {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT};
-#endif
-
-static int initialized = 0;
-
-int sim_switch_use_physical(unsigned int nr, int physical)
-{
-	const Pin *pin;
-	enum led led;
-
-	if (!initialized) {
-		TRACE_ERROR("Somebody forgot to call sim_switch_init()\r\n");
-		sim_switch_init();
-	}
-
-	TRACE_INFO("Modem %d: %s SIM\n\r", nr,
-		   physical ? "physical" : "virtual");
-
-	switch (nr) {
-#ifdef PIN_SIM_SWITCH1
-	case 0:
-		pin = &pin_conn_usim1;
-		led = LED_USIM1;
-		break;
-#endif
-#ifdef PIN_SIM_SWITCH2
-	case 1:
-		pin = &pin_conn_usim2;
-		led = LED_USIM2;
-		break;
-#endif
-	default:
-		TRACE_ERROR("Invalid SIM%u\n\r", nr);
-		return -1;
-	}
-
-	if (physical) {
-		TRACE_INFO("%u: Use local/physical SIM\r\n", nr);
-		PIO_Clear(pin);
-		led_blink(led, BLINK_ALWAYS_ON);
-	} else {
-		TRACE_INFO("%u: Use remote/emulated SIM\r\n", nr);
-		PIO_Set(pin);
-		led_blink(led, BLINK_ALWAYS_OFF);
-	}
-
-	return 0;
-}
-
-int sim_switch_init(void)
-{
-	int num_switch = 0;
-#ifdef PIN_SIM_SWITCH1
-	PIO_Configure(&pin_conn_usim1, 1);
-	num_switch++;
-#endif
-#ifdef PIN_SIM_SWITCH2
-	PIO_Configure(&pin_conn_usim2, 1);
-	num_switch++;
-#endif
-	initialized = 1;
-	return num_switch;
-}

firmware/libboard/sam3p256/include/board.h

@@ -135,6 +135,11 @@
 #define PIN_SPI_WP    {PA15, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
 #endif
 
+/** Pin configuration to control USB pull-up on D+
+ *  @details the USB pull-up on D+ is enable by default on the board but can be disabled by setting PA16 high
+ */
+#define PIN_USB_PULLUP  {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+
 /** USB definitions */
 /* OpenMoko SIMtrace 2 USB vendor ID */
 #define BOARD_USB_VENDOR_ID	USB_VENDOR_OPENMOKO

firmware/libboard/simtrace/include/board.h

@@ -40,7 +40,7 @@
 /** green LED pin definition */
 #define PIN_LED_GREEN   {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
 /** LEDs pin definition */
-#define PINS_LEDS       PIN_LED_RED, PIN_LED_GREEN
+#define PINS_LEDS       PIN_LED_RED, PIN_LED_GREEN 
 /** index for red LED in LEDs pin definition array */
 #define LED_NUM_RED     0
 /** index for green LED in LEDs pin definition array */
@@ -78,11 +78,11 @@
 /* Phone USIM slot 1 RST pin (active low; RST_PHONE in schematic) */
 #define PIN_USIM1_nRST         {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_IT_EDGE | PIO_DEGLITCH }
 /* Phone I/O data signal input/output (I/O_PHONE in schematic) */
-#define PIN_USIM1_IO           {PIO_PA22A_TXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+#define PIN_PHONE_IO           {PIO_PA22A_TXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
 /* Phone CLK clock input (CLK_PHONE in schematic) */
-#define PIN_USIM1_CLK          {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+#define PIN_PHONE_CLK          {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
 /* Pin used for phone USIM slot 1 communication */
-#define PINS_USIM1              PIN_USIM1_IO, PIN_USIM1_CLK, PIN_PHONE_CLK_INPUT, PIN_USIM1_VCC, PIN_PHONE_IO_INPUT, PIN_USIM1_nRST
+#define PINS_USIM1              PIN_PHONE_IO, PIN_PHONE_CLK, PIN_PHONE_CLK_INPUT, PIN_USIM1_VCC, PIN_PHONE_IO_INPUT, PIN_USIM1_nRST
 /* Phone I/O data signal input/output (unused USART RX input; connected to I/O_PHONE in schematic) */
 #define PIN_PHONE_IO_INPUT     {PIO_PA21A_RXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
 /* Pin used as clock input (to measure the ETU duration; connected to CLK_PHONE in schematic) */
@@ -134,6 +134,11 @@
 /* SPI flash write protect pin (active low, pulled low) */
 #define PIN_SPI_WP    {PA15, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
 
+/** Pin configuration to control USB pull-up on D+
+ *  @details the USB pull-up on D+ is enable by default on the board but can be disabled by setting PA16 high
+ */
+#define PIN_USB_PULLUP  {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+
 /** USB definitions */
 /* OpenMoko SIMtrace 2 USB vendor ID */
 #define BOARD_USB_VENDOR_ID	USB_VENDOR_OPENMOKO
@@ -148,14 +153,10 @@
 
 /** Supported modes */
 /* SIMtrace board supports sniffer mode */
-#ifdef APPLICATION_trace
 #define HAVE_SNIFFER
-#endif
 /* SIMtrace board supports CCID mode */
 //#define HAVE_CCID
 /* SIMtrace board supports card emulation mode */
-#ifdef APPLICATION_cardem
-#define HAVE_CARDEM
-#endif
+//#define HAVE_CARDEM
 /* SIMtrace board supports man-in-the-middle mode */
 //#define HAVE_MITM

firmware/libboard/simtrace/source/sim_switch.c

@@ -1,54 +0,0 @@
-/* Code to switch between local (physical) and remote (emulated) SIM
- *
- * (C) 2015-2017 by Harald Welte <hwelte@hmw-consulting.de>
- * (C) 2018, sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#include "board.h"
-#include "trace.h"
-#include "led.h"
-#include "sim_switch.h"
-
-int sim_switch_use_physical(unsigned int nr, int physical)
-{
-	const Pin pin_sc = PIN_SC_SW_DEFAULT; // pin to control bus switch for VCC/RST/CLK signals
-	const Pin pin_io = PIN_IO_SW_DEFAULT; // pin to control bus switch for I/O signal
-
-	if (nr > 0) {
-		TRACE_ERROR("SIM interface for Modem %d can't be switched\r\n", nr);
-		return -1;
-	}
-
-	TRACE_INFO("Modem %u: %s SIM\n\r", nr, physical ? "physical" : "virtual");
-
-	if (physical) {
-		TRACE_INFO("%u: Use local/physical SIM\r\n", nr);
-		PIO_Set(&pin_sc);
-		PIO_Set(&pin_io);
-	} else {
-		TRACE_INFO("%u: Use remote/emulated SIM\r\n", nr);
-		PIO_Clear(&pin_sc);
-		PIO_Clear(&pin_io);
-	}
-
-	return 0;
-}
-
-int sim_switch_init(void)
-{
-	// the bus switch is already initialised
-	return 1; // SIMtrace hardware has only one switchable interface
-}

firmware/libcommon/include/assert.h

@@ -89,7 +89,7 @@
 		/// \param condition  Condition to verify.
 		#define ASSERT(condition)  { \
 			if (!(condition)) { \
-				printf_sync("-F- ASSERT: %s %s:%d\n\r", #condition, __BASE_FILE__, __LINE__); \
+				printf("-F- ASSERT: %s %s:%d\n\r", #condition, __BASE_FILE__, __LINE__); \
 				while (1); \
 			} \
 		}

firmware/libcommon/include/card_emu.h

@@ -31,6 +31,7 @@ enum card_io {
 
 /** initialise card slot
  *  @param[in] slot_num slot number (arbitrary number)
+ *  @param[in] tc_chan timer counter channel (to measure the ETU)
  *  @param[in] uart_chan UART peripheral channel
  *  @param[in] in_ep USB IN end point number
  *  @param[in] irq_ep USB INTerrupt end point number
@@ -39,7 +40,7 @@ enum card_io {
  *  @param[in] clocked initial CLK signat state (true = active)
  *  @return main card handle reference
  */
-struct card_handle *card_emu_init(uint8_t slot_num, uint8_t uart_chan, uint8_t in_ep, uint8_t irq_ep, bool vcc_active, bool in_reset, bool clocked);
+struct card_handle *card_emu_init(uint8_t slot_num, uint8_t tc_chan, uint8_t uart_chan, uint8_t in_ep, uint8_t irq_ep, bool vcc_active, bool in_reset, bool clocked);
 
 /* process a single byte received from the reader */
 void card_emu_process_rx_byte(struct card_handle *ch, uint8_t byte);
@@ -57,17 +58,10 @@ struct llist_head *card_emu_get_uart_tx_queue(struct card_handle *ch);
 void card_emu_have_new_uart_tx(struct card_handle *ch);
 void card_emu_report_status(struct card_handle *ch, bool report_on_irq);
 
-void card_emu_wtime_half_expired(void *ch);
-void card_emu_wtime_expired(void *ch);
-
-
-#define ENABLE_TX		0x01
-#define ENABLE_RX		0x02
-#define ENABLE_TX_TIMER_ONLY	0x03
+#define ENABLE_TX	0x01
+#define ENABLE_RX	0x02
 
 int card_emu_uart_update_fidi(uint8_t uart_chan, unsigned int fidi);
-void card_emu_uart_update_wt(uint8_t uart_chan, uint32_t wt);
-void card_emu_uart_reset_wt(uint8_t uart_chan);
 int card_emu_uart_tx(uint8_t uart_chan, uint8_t byte);
 void card_emu_uart_enable(uint8_t uart_chan, uint8_t rxtx);
 void card_emu_uart_wait_tx_idle(uint8_t uart_chan);

firmware/libcommon/include/iso7816_fidi.h

@@ -21,10 +21,10 @@
 #include <stdint.h>
 
 /* Table 7 of ISO 7816-3:2006 */
-extern const uint16_t iso7816_3_fi_table[16];
+extern const uint16_t fi_table[];
 
 /* Table 8 from ISO 7816-3:2006 */
-extern const uint8_t iso7816_3_di_table[16];
+extern const uint8_t di_table[];
 
-/* compute the F/D ratio based on F_index and D_index values */
-int iso7816_3_compute_fd_ratio(uint8_t f_index, uint8_t d_index);
+/* compute the F/D ratio based on Fi and Di values */
+int compute_fidi_ratio(uint8_t fi, uint8_t di);

firmware/libcommon/include/simtrace_prot.h

@@ -230,17 +230,11 @@ struct cardemu_usb_msg_status {
 	uint32_t flags;
 	/* phone-applied target voltage in mV */
 	uint16_t voltage_mv;
-	/* F/D related information. Not actual Fn/Dn values but indexes into tables! */
-	union {
-		uint8_t F_index;	/* <! Index to ISO7816-3 Table 7 (F and f_max values) */
-		uint8_t fi;		/* <! old, wrong name for API compatibility */
-	};
-	union {
-		uint8_t D_index;	/* <! Index to ISO7816-3 Table 8 (D value) */
-		uint8_t di;		/* <! old, wrong name for API compatibility */
-	};
-	uint8_t wi;		/* <! Waiting Integer as defined in ISO7816-3 Section 10.2 */
-	uint32_t waiting_time;	/* <! Waiting Time in etu as defined in ISO7816-3 Section 8.1 */
+	/* Fi/Di related information */
+	uint8_t fi;
+	uint8_t di;
+	uint8_t wi;
+	uint32_t waiting_time;
 } __attribute__ ((packed));
 
 /* CEMU_USB_MSGT_DO_PTS */
@@ -269,8 +263,6 @@ struct cardemu_usb_msg_error {
 struct cardemu_usb_msg_config {
 	/* bit-mask of CEMU_FEAT_F flags */
 	uint32_t features;
-	/* the selected slot number (if an external mux is present) */
-	uint8_t slot_mux_nr;
 } __attribute__ ((packed));
 
 /***********************************************************************

firmware/libcommon/include/simtrace_usb.h

@@ -25,8 +25,6 @@
 #define USB_PRODUCT_QMOD_SAM3		0x4004
 #define USB_PRODUCT_SIMTRACE2_DFU	0x60e3	/* was 0x60e2 */
 #define USB_PRODUCT_SIMTRACE2		0x60e3
-#define USB_PRODUCT_OCTSIMTEST		0x616d
-#define USB_PRODUCT_NGFF_CARDEM		0x616e
 
 /* USB proprietary class */
 #define USB_CLASS_PROPRIETARY			0xff

firmware/libcommon/include/usb_buf.h

@@ -42,5 +42,15 @@ int usb_drain_queue(uint8_t ep);
 void usb_buf_init(void);
 struct usb_buffered_ep *usb_get_buf_ep(uint8_t ep);
 
-int usb_refill_to_host(uint8_t ep);
-int usb_refill_from_host(uint8_t ep);
+struct usb_if {
+	uint8_t if_num;		/* interface number */
+	uint8_t ep_out;		/* OUT endpoint (0 if none) */
+	uint8_t ep_in;		/* IN endpint (0 if none) */
+	uint8_t ep_int;		/* INT endpoint (0 if none) */
+	void *data;		/* opaque data, passed through */
+	struct {
+		/* call-back to be called for inclming messages on OUT EP */
+		void (*rx_out)(struct msgb *msg, const struct usb_if *usb_if);
+	} ops;
+};
+void usb_process(const struct usb_if *usb_if);

firmware/libcommon/source/card_emu.c

@@ -1,6 +1,6 @@
 /* ISO7816-3 state machine for the card side
  *
- * (C) 2010-2021 by Harald Welte <laforge@gnumonks.org>
+ * (C) 2010-2019 by Harald Welte <laforge@gnumonks.org>
  * (C) 2018 by sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -27,15 +27,13 @@
 #include "utils.h"
 #include "trace.h"
 #include "iso7816_fidi.h"
+#include "tc_etu.h"
 #include "card_emu.h"
 #include "simtrace_prot.h"
 #include "usb_buf.h"
 #include <osmocom/core/linuxlist.h>
 #include <osmocom/core/msgb.h>
 
-#ifdef HAVE_SLOT_MUX
-#include "mux.h"
-#endif
 
 #define NUM_SLOTS		2
 
@@ -156,34 +154,19 @@ struct card_handle {
 	bool in_reset;	/*< if card is in reset (true = RST low/asserted, false = RST high/ released) */
 	bool clocked;	/*< if clock is active ( true = active, false = inactive) */
 
-	/* All below variables with _index suffix are indexes from 0..15 into Tables 7 + 8
-	 * of ISO7816-3. */
-
-	/*! Index to clock rate conversion integer Fi (ISO7816-3 Table 7).
-	 *  \note this represents the maximum value supported by the card, and can be indicated in TA1 */
-	uint8_t Fi_index;
-	/*! Current value of index to clock rate conversion integer F (ISO 7816-3 Section 7.1). */
-	uint8_t F_index;
-
-	/*! Index to baud rate adjustment factor Di (ISO7816-3 Table 8).
-	 *  \note this represents the maximum value supported by the card, and can be indicated in TA1 */
-	uint8_t Di_index;
-	/*! Current value of index to baud rate adjustment factor D (ISO 7816-3 Section 7.1). */
-	uint8_t D_index;
-
-	/*! Waiting Integer (ISO7816-3 Section 10.2).
-	 *  \note this value can be set in TA2 */
+	/* timing parameters, from PTS */
+	uint8_t fi;
+	uint8_t di;
 	uint8_t wi;
 
-	/*! Waiting Time, in ETU (ISO7816-3 Section 8.1).
-	 *  \note this depends on Fi, Di, and WI if T=0 is used */
-	uint32_t waiting_time;	/* in etu */
-
+	uint8_t tc_chan;	/* TC channel number */
 	uint8_t uart_chan;	/* UART channel */
 
 	uint8_t in_ep;		/* USB IN EP */
 	uint8_t irq_ep;		/* USB IN EP */
 
+	uint32_t waiting_time;	/* in clocks */
+
 	/* ATR state machine */
 	struct {
 		uint8_t idx;
@@ -223,7 +206,7 @@ static void card_handle_reset(struct card_handle *ch)
 {
 	struct msgb *msg;
 
-	card_emu_uart_update_wt(ch->uart_chan, 0);
+	tc_etu_disable(ch->tc_chan);
 
 	/* release any buffers we may still own */
 	if (ch->uart_tx_msg) {
@@ -378,14 +361,16 @@ static void emu_update_fidi(struct card_handle *ch)
 {
 	int rc;
 
-	rc = iso7816_3_compute_fd_ratio(ch->F_index, ch->D_index);
+	rc = compute_fidi_ratio(ch->fi, ch->di);
 	if (rc > 0 && rc < 0x400) {
-		TRACE_INFO("%u: computed F(%u)/D(%u) ratio: %d\r\n", ch->num,
-			   ch->F_index, ch->D_index, rc);
+		TRACE_INFO("%u: computed Fi(%u) Di(%u) ratio: %d\r\n",
+			    ch->num, ch->fi, ch->di, rc);
 		/* make sure UART uses new F/D ratio */
 		card_emu_uart_update_fidi(ch->uart_chan, rc);
+		/* notify ETU timer about this */
+		tc_etu_set_etu(ch->tc_chan, rc);
 	} else
-		TRACE_INFO("%u: computed F/D ratio %d unsupported\r\n",
+		TRACE_INFO("%u: computed FiDi ration %d unsupported\r\n",
 			   ch->num, rc);
 }
 
@@ -407,23 +392,19 @@ static void card_set_state(struct card_handle *ch,
 	case ISO_S_WAIT_RST:
 		/* disable Rx and Tx of UART */
 		card_emu_uart_enable(ch->uart_chan, 0);
-		/* disable timeout */
-		card_emu_uart_update_wt(ch->uart_chan, 0);
 		break;
 	case ISO_S_WAIT_ATR:
 		/* Reset to initial Fi / Di ratio */
-		ch->Fi_index = ch->F_index = 1;
-		ch->Di_index = ch->D_index = 1;
-		ch->wi = ISO7816_3_DEFAULT_WI;
-		ch->waiting_time = ISO7816_3_INIT_WTIME;
+		ch->fi = 1;
+		ch->di = 1;
 		emu_update_fidi(ch);
-		/* enable TX to be able to use the timeout */
-		card_emu_uart_enable(ch->uart_chan, ENABLE_TX_TIMER_ONLY);
 		/* the ATR should only be sent 400 to 40k clock cycles after the RESET.
-		 * we use the UART timeout mechanism to wait this time.
+		 * we use the tc_etu mechanism to wait this time.
 		 * since the initial ETU is Fd=372/Dd=1 clock cycles long, we have to wait 2-107 ETU.
 		 */
-		card_emu_uart_update_wt(ch->uart_chan, 2);
+		tc_etu_set_wtime(ch->tc_chan, 2);
+		/* enable the TC/ETU counter once reset has been released */
+		tc_etu_enable(ch->tc_chan);
 		break;
 	case ISO_S_IN_ATR:
 		/* initialize to default WI, this will be overwritten if we
@@ -433,7 +414,7 @@ static void card_set_state(struct card_handle *ch,
 		/* update waiting time to initial waiting time */
 		ch->waiting_time = ISO7816_3_INIT_WTIME;
 		/* set initial waiting time */
-		card_emu_uart_update_wt(ch->uart_chan, ch->waiting_time);
+		tc_etu_set_wtime(ch->tc_chan, ch->waiting_time);
 		/* Set ATR sub-state to initial state */
 		ch->atr.idx = 0;
 		/* enable USART transmission to reader */
@@ -508,11 +489,9 @@ static int tx_byte_atr(struct card_handle *ch)
 				}
 			}
 		}
-		/* update waiting time (see ISO 7816-3 10.2). We can drop the Fi
-		 * multiplier as we store the waiting time in units of 'etu', and
-		 * don't really care what the number of clock cycles or the absolute
-		 * wall clock time is */
-		ch->waiting_time = ch->wi * 960;
+		/* update waiting time (see ISO 7816-3 10.2) */
+		ch->waiting_time = ch->wi * 960 * ch->fi;
+		tc_etu_set_wtime(ch->tc_chan, ch->waiting_time);
 		/* go to next state */
 		card_set_state(ch, ISO_S_WAIT_TPDU);
 		return 0;
@@ -647,11 +626,10 @@ static int tx_byte_pts(struct card_handle *ch)
 	case PTS_S_WAIT_RESP_PTS1:
 		byte = ch->pts.resp[_PTS1];
 		/* This must be TA1 */
-		ch->F_index = byte >> 4;
-		ch->D_index = byte & 0xf;
-		TRACE_DEBUG("%u: found F=%u D=%u\r\n", ch->num,
-			    iso7816_3_fi_table[ch->F_index], iso7816_3_di_table[ch->D_index]);
-		/* FIXME: if F or D are 0, become unresponsive to signal error condition */
+		ch->fi = byte >> 4;
+		ch->di = byte & 0xf;
+		TRACE_DEBUG("%u: found Fi=%u Di=%u\r\n", ch->num,
+			    ch->fi, ch->di);
 		break;
 	case PTS_S_WAIT_RESP_PTS2:
 		byte = ch->pts.resp[_PTS2];
@@ -676,11 +654,10 @@ static int tx_byte_pts(struct card_handle *ch)
 	switch (ch->pts.state) {
 	case PTS_S_WAIT_RESP_PCK:
 		card_emu_uart_wait_tx_idle(ch->uart_chan);
-		/* update baud rate generator with F/D */
+		/* update baud rate generator with Fi/Di */
 		emu_update_fidi(ch);
 		/* Wait for the next TPDU */
 		card_set_state(ch, ISO_S_WAIT_TPDU);
-		set_pts_state(ch, PTS_S_WAIT_REQ_PTSS);
 		break;
 	default:
 		/* calculate the next state and set it */
@@ -756,28 +733,14 @@ static void set_tpdu_state(struct card_handle *ch, enum tpdu_state new_ts)
 
 	switch (new_ts) {
 	case TPDU_S_WAIT_CLA:
-		/* switch back to receiving mode */
-		card_emu_uart_enable(ch->uart_chan, ENABLE_RX);
-		/* disable waiting time since we don't expect any data */
-		card_emu_uart_update_wt(ch->uart_chan, 0);
-		break;
-	case TPDU_S_WAIT_INS:
-		/* start waiting for the rest of the header/body */
-		card_emu_uart_update_wt(ch->uart_chan, ch->waiting_time);
-		break;
 	case TPDU_S_WAIT_RX:
-		/* switch to receive mode to receive the body */
 		card_emu_uart_enable(ch->uart_chan, ENABLE_RX);
-		/* start waiting for the body */
-		card_emu_uart_update_wt(ch->uart_chan, ch->waiting_time);
 		break;
 	case TPDU_S_WAIT_PB:
 		/* we just completed the TPDU header from reader to card
 		 * and now need to disable the receiver, enable the
 		 * transmitter and transmit the procedure byte */
 		card_emu_uart_enable(ch->uart_chan, ENABLE_TX);
-		/* prepare to extend the waiting time once half of it is reached */
-		card_emu_uart_update_wt(ch->uart_chan, ch->waiting_time);
 		break;
 	default:
 		break;
@@ -922,7 +885,6 @@ static int tx_byte_tpdu(struct card_handle *ch)
 	byte = msgb_pull_u8(msg);
 
 	card_emu_uart_tx(ch->uart_chan, byte);
-	card_emu_uart_reset_wt(ch->uart_chan);
 
 	/* this must happen _after_ the byte has been transmitted */
 	switch (ch->tpdu.state) {
@@ -1063,8 +1025,8 @@ void card_emu_report_status(struct card_handle *ch, bool report_on_irq)
 	if (ch->in_reset)
 		sts->flags |= CEMU_STATUS_F_RESET_ACTIVE;
 	/* FIXME: voltage + card insert */
-	sts->F_index = ch->F_index;
-	sts->D_index = ch->D_index;
+	sts->fi = ch->fi;
+	sts->di = ch->di;
 	sts->wi = ch->wi;
 	sts->waiting_time = ch->waiting_time;
 
@@ -1083,12 +1045,6 @@ static void card_emu_report_config(struct card_handle *ch)
 
 	cfg = (struct cardemu_usb_msg_config *) msgb_put(msg, sizeof(*cfg));
 	cfg->features = ch->features;
-#ifdef HAVE_SLOT_MUX
-	cfg->slot_mux_nr = mux_get_slot();
-#else
-	cfg->slot_mux_nr = 0;
-#endif
-
 
 	usb_buf_upd_len_and_submit(msg);
 }
@@ -1127,7 +1083,9 @@ void card_emu_io_statechg(struct card_handle *ch, enum card_io io, int active)
 	case CARD_IO_RST:
 		if (active == 0 && ch->in_reset) {
 			TRACE_INFO("%u: RST released\r\n", ch->num);
-			if (ch->vcc_active && ch->clocked && ch->state == ISO_S_WAIT_RST) {
+			if (ch->vcc_active && ch->clocked) {
+				/* enable the TC/ETU counter once reset has been released */
+				tc_etu_enable(ch->tc_chan);
 				/* prepare to send the ATR */
 				card_set_state(ch, ISO_S_WAIT_ATR);
 			}
@@ -1136,7 +1094,6 @@ void card_emu_io_statechg(struct card_handle *ch, enum card_io io, int active)
 			TRACE_INFO("%u: RST asserted\r\n", ch->num);
 			card_handle_reset(ch);
 			chg_mask |= CEMU_STATUS_F_RESET_ACTIVE;
-			card_set_state(ch, ISO_S_WAIT_RST);
 		}
 		ch->in_reset = active;
 		break;
@@ -1186,7 +1143,7 @@ int card_emu_set_atr(struct card_handle *ch, const uint8_t *atr, uint8_t len)
 }
 
 /* hardware driver informs us that one (more) ETU has expired */
-void card_emu_wtime_half_expired(void *handle)
+void tc_etu_wtime_half_expired(void *handle)
 {
 	struct card_handle *ch = handle;
 	/* transmit NULL procedure byte well before waiting time expires */
@@ -1196,10 +1153,7 @@ void card_emu_wtime_half_expired(void *handle)
 		case TPDU_S_WAIT_PB:
 		case TPDU_S_WAIT_TX:
 			putchar('N');
-			/* we are waiting for data from the user. Send a procedure byte to ask the
-			 * reader to wait more time */
 			card_emu_uart_tx(ch->uart_chan, ISO7816_3_PB_NULL);
-			card_emu_uart_reset_wt(ch->uart_chan);
 			break;
 		default:
 			break;
@@ -1211,7 +1165,7 @@ void card_emu_wtime_half_expired(void *handle)
 }
 
 /* hardware driver informs us that one (more) ETU has expired */
-void card_emu_wtime_expired(void *handle)
+void tc_etu_wtime_expired(void *handle)
 {
 	struct card_handle *ch = handle;
 	switch (ch->state) {
@@ -1225,23 +1179,8 @@ void card_emu_wtime_expired(void *handle)
 	}
 }
 
-/* reasonable ATR offering all protocols and voltages
- * smartphones might not care, but other readers do
- *
- * TS =		0x3B	Direct Convention
- * T0 =		0x80	Y(1): b1000, K: 0 (historical bytes)
- * TD(1) =	0x80	Y(i+1) = b1000, Protocol T=0
- * ----
- * TD(2) =	0x81	Y(i+1) = b1000, Protocol T=1
- * ----
- * TD(3) =	0x1F	Y(i+1) = b0001, Protocol T=15
- * ----
- * TA(4) =	0xC7	Clock stop: no preference - Class accepted by the card: (3G) A 5V B 3V C 1.8V
- * ----
- * Historical bytes
- * TCK =	0x59 	correct checksum
- */
-static const uint8_t default_atr[] = { 0x3B, 0x80, 0x80, 0x81 , 0x1F, 0xC7, 0x59 };
+/* shortest ATR possible (uses default speed and no options) */
+static const uint8_t default_atr[] = { 0x3B, 0x00 };
 
 static struct card_handle card_handles[NUM_SLOTS];
 
@@ -1251,19 +1190,13 @@ int card_emu_set_config(struct card_handle *ch, const struct cardemu_usb_msg_con
 	if (scfg_len >= sizeof(uint32_t))
 		ch->features = (scfg->features & SUPPORTED_FEATURES);
 
-#ifdef HAVE_SLOT_MUX
-	if (scfg_len >= sizeof(uint32_t)+sizeof(uint8_t)) {
-		mux_set_slot(scfg->slot_mux_nr);
-	}
-#endif
-
 	/* send back a report of our current configuration */
 	card_emu_report_config(ch);
 
 	return 0;
 }
 
-struct card_handle *card_emu_init(uint8_t slot_num, uint8_t uart_chan, uint8_t in_ep, uint8_t irq_ep, bool vcc_active, bool in_reset, bool clocked)
+struct card_handle *card_emu_init(uint8_t slot_num, uint8_t tc_chan, uint8_t uart_chan, uint8_t in_ep, uint8_t irq_ep, bool vcc_active, bool in_reset, bool clocked)
 {
 	struct card_handle *ch;
 
@@ -1284,10 +1217,11 @@ struct card_handle *card_emu_init(uint8_t slot_num, uint8_t uart_chan, uint8_t i
 	ch->in_reset = in_reset;
 	ch->clocked = clocked;
 
-	ch->Fi_index = ch->F_index = 1;
-	ch->Di_index = ch->D_index = 1;
+	ch->fi = 0;
+	ch->di = 1;
 	ch->wi = ISO7816_3_DEFAULT_WI;
 
+	ch->tc_chan = tc_chan;
 	ch->uart_chan = uart_chan;
 	ch->waiting_time = ISO7816_3_INIT_WTIME;
 
@@ -1295,10 +1229,9 @@ struct card_handle *card_emu_init(uint8_t slot_num, uint8_t uart_chan, uint8_t i
 	ch->atr.len = sizeof(default_atr);
 	memcpy(ch->atr.atr, default_atr, ch->atr.len);
 
-	ch->pts.state = PTS_S_WAIT_REQ_PTSS;
-	ch->tpdu.state = TPDU_S_WAIT_CLA;
-
 	card_handle_reset(ch);
 
+	tc_etu_init(ch->tc_chan, ch);
+
 	return ch;
 }

firmware/libcommon/source/host_communication.c

@@ -57,7 +57,7 @@ static void usb_write_cb(uint8_t *arg, uint8_t status, uint32_t transferred,
 }
 
 /* check if the spcified IN endpoint is idle and submit the next buffer from queue */
-int usb_refill_to_host(uint8_t ep)
+static int usb_refill_to_host(uint8_t ep)
 {
 	struct usb_buffered_ep *bep = usb_get_buf_ep(ep);
 	struct msgb *msg;
@@ -130,7 +130,7 @@ static void usb_read_cb(uint8_t *arg, uint8_t status, uint32_t transferred,
 }
 
 /* refill the read queue for data received from host PC on OUT EP, if needed */
-int usb_refill_from_host(uint8_t ep)
+static int usb_refill_from_host(uint8_t ep)
 {
 	struct usb_buffered_ep *bep = usb_get_buf_ep(ep);
 	struct msgb *msg;
@@ -198,3 +198,45 @@ int usb_drain_queue(uint8_t ep)
 
 	return ret;
 }
+
+
+
+/* iterate over the queue of incoming USB commands and dispatch/execute
+ * them */
+static void process_any_usb_commands(const struct usb_if *usb_if)
+{
+	struct llist_head *queue = usb_get_queue(usb_if->ep_out);
+	struct llist_head *lh;
+	struct msgb *msg;
+	int i;
+
+	/* limit the number of iterations to 10, to ensure we don't get
+	 * stuck here without returning to main loop processing */
+	for (i = 0; i < 10; i++) {
+		/* de-queue the list head in an irq-safe way */
+		lh = llist_head_dequeue_irqsafe(queue);
+		if (!lh)
+			break;
+		msg = llist_entry(lh, struct msgb, list);
+		usb_if->ops.rx_out(msg, usb_if);
+	}
+}
+
+/* perform any action related to USB processing (IRQ/INT/OUT EP refill, handling OUT) */
+void usb_process(const struct usb_if *usb_if)
+{
+	/* first try to send any pending messages on IRQ */
+	if (usb_if->ep_int)
+		usb_refill_to_host(usb_if->ep_int);
+
+	/* then try to send any pending messages on IN */
+	if (usb_if->ep_in)
+		usb_refill_to_host(usb_if->ep_in);
+
+	/* ensure we can handle incoming USB messages from the
+	 * host */
+	if (usb_if->ep_out) {
+		usb_refill_from_host(usb_if->ep_out);
+		process_any_usb_commands(usb_if);
+	}
+}

firmware/libcommon/source/iso7816_fidi.c

@@ -23,38 +23,38 @@
 #include "iso7816_fidi.h"
 
 /* Table 7 of ISO 7816-3:2006 */
-const uint16_t iso7816_3_fi_table[] = {
+const uint16_t fi_table[] = {
 	372, 372, 558, 744, 1116, 1488, 1860, 0,
 	0, 512, 768, 1024, 1536, 2048, 0, 0
 };
 
 /* Table 8 from ISO 7816-3:2006 */
-const uint8_t iso7816_3_di_table[] = {
+const uint8_t di_table[] = {
 	0, 1, 2, 4, 8, 16, 32, 64,
 	12, 20, 2, 4, 8, 16, 32, 64,
 };
 
 /* compute the F/D ratio based on Fi and Di values */
-int iso7816_3_compute_fd_ratio(uint8_t f_index, uint8_t d_index)
+int compute_fidi_ratio(uint8_t fi, uint8_t di)
 {
 	uint16_t f, d;
 	int ret;
 
-	if (f_index >= ARRAY_SIZE(iso7816_3_fi_table) ||
-	    d_index >= ARRAY_SIZE(iso7816_3_di_table))
+	if (fi >= ARRAY_SIZE(fi_table) ||
+	    di >= ARRAY_SIZE(di_table))
 		return -EINVAL;
 
-	f = iso7816_3_fi_table[f_index];
+	f = fi_table[fi];
 	if (f == 0)
 		return -EINVAL;
 
-	d = iso7816_3_di_table[d_index];
+	d = di_table[di];
 	if (d == 0)
 		return -EINVAL;
 
 	/* See table 7 of ISO 7816-3: From 1000 on we divide by 1/d,
 	 * which equals a multiplication by d */
-	if (d_index < 8)
+	if (di < 8)
 		ret = f / d;
 	else
 		ret = f * d;

firmware/libcommon/source/mode_cardemu.c

@@ -1,7 +1,7 @@
 /* card emulation mode
  *
  * (C) 2015-2017 by Harald Welte <laforge@gnumonks.org>
- * (C) 2018-2019 by sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
+ * (C) 2018 by sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -34,31 +34,17 @@
 
 #define TRACE_ENTRY()	TRACE_DEBUG("%s entering\r\n", __func__)
 
+static void dispatch_received_usb_msg(struct msgb *msg, const struct usb_if *usb_if);
+
 #ifdef PINS_CARDSIM
 static const Pin pins_cardsim[] = PINS_CARDSIM;
 #endif
 
 /* UART pins */
-#if defined(ngff_cardem)
-static const Pin pins_usim1[]	= {PINS_USIM2};
-static const Pin pin_usim1_rst	= PIN_USIM2_nRST;
-#define FIRST_USART_BASE USART0
-#define FIRST_USART_ID ID_USART0
-#define FIRST_USART_IRQ USART0_IRQn
-#else
 static const Pin pins_usim1[]	= {PINS_USIM1};
 static const Pin pin_usim1_rst	= PIN_USIM1_nRST;
-#define FIRST_USART_BASE USART1
-#define FIRST_USART_ID ID_USART1
-#define FIRST_USART_IRQ USART1_IRQn
-#endif
 static const Pin pin_usim1_vcc	= PIN_USIM1_VCC;
 
-#ifdef PIN_USIM1_IO_DIR
-static const Pin pin_io_dir 	= PIN_USIM1_IO_DIR;
-#endif
-
-
 #ifdef CARDEMU_SECOND_UART
 static const Pin pins_usim2[]	= {PINS_USIM2};
 static const Pin pin_usim2_rst	= PIN_USIM2_nRST;
@@ -71,18 +57,8 @@ struct cardem_inst {
 	struct llist_head usb_out_queue;
 	struct ringbuf rb;
 	struct Usart_info usart_info;
-	struct {
-		/*! receiver waiting time to trigger timeout (0 to deactivate it) */
-		uint32_t total;
-		/*! remaining waiting time (we may need multiple timer runs to reach total */
-		uint32_t remaining;
-		/*! did we already notify about half the time having expired? */
-		bool half_time_notified;
-	} wt;
 	int usb_pending_old;
-	uint8_t ep_out;
-	uint8_t ep_in;
-	uint8_t ep_int;
+	struct usb_if usb_if;
 	const Pin pin_insert;
 #ifdef DETECT_VCC_BY_ADC
 	uint32_t vcc_uv;
@@ -97,13 +73,20 @@ struct cardem_inst cardem_inst[] = {
 	{
 		.num = 0,
 		.usart_info = 	{
-			.base = FIRST_USART_BASE,
-			.id = FIRST_USART_ID,
+			.base = USART1,
+			.id = ID_USART1,
 			.state = USART_RCV
 		},
-		.ep_out = SIMTRACE_CARDEM_USB_EP_USIM1_DATAOUT,
-		.ep_in = SIMTRACE_CARDEM_USB_EP_USIM1_DATAIN,
-		.ep_int = SIMTRACE_CARDEM_USB_EP_USIM1_INT,
+		.usb_if = {
+			.if_num = 0,
+			.ep_out = SIMTRACE_CARDEM_USB_EP_USIM1_DATAOUT,
+			.ep_in = SIMTRACE_CARDEM_USB_EP_USIM1_DATAIN,
+			.ep_int = SIMTRACE_CARDEM_USB_EP_USIM1_INT,
+			.data = &cardem_inst[0],
+			.ops = {
+				.rx_out = dispatch_received_usb_msg,
+			},
+		},
 #ifdef PIN_SET_USIM1_PRES
 		.pin_insert = PIN_SET_USIM1_PRES,
 #endif
@@ -116,9 +99,16 @@ struct cardem_inst cardem_inst[] = {
 			.id = ID_USART0,
 			.state = USART_RCV
 		},
-		.ep_out = SIMTRACE_CARDEM_USB_EP_USIM2_DATAOUT,
-		.ep_in = SIMTRACE_CARDEM_USB_EP_USIM2_DATAIN,
-		.ep_int = SIMTRACE_CARDEM_USB_EP_USIM2_INT,
+		.usb_if = {
+			.if_num = 1,
+			.ep_out = SIMTRACE_CARDEM_USB_EP_USIM2_DATAOUT,
+			.ep_in = SIMTRACE_CARDEM_USB_EP_USIM2_DATAIN,
+			.ep_int = SIMTRACE_CARDEM_USB_EP_USIM2_INT,
+			.data = &cardem_inst[1],
+			.ops = {
+				.rx_out = dispatch_received_usb_msg,
+			},
+		}
 #ifdef PIN_SET_USIM2_PRES
 		.pin_insert = PIN_SET_USIM2_PRES,
 #endif
@@ -158,44 +148,18 @@ void card_emu_uart_wait_tx_idle(uint8_t uart_chan)
 	wait_tx_idle(usart);
 }
 
-static void card_emu_uart_set_direction(uint8_t uart_chan, bool tx)
-{
-	/* only on some boards (octsimtest) we hae an external level
-	 * shifter that requires us to switch the direction between RX and TX */
-#ifdef PIN_USIM1_IO_DIR
-	if (uart_chan == 0) {
-		if (tx)
-			PIO_Set(&pin_io_dir);
-		else
-			PIO_Clear(&pin_io_dir);
-	}
-#endif
-}
-
 /* call-back from card_emu.c to enable/disable transmit and/or receive */
 void card_emu_uart_enable(uint8_t uart_chan, uint8_t rxtx)
 {
 	Usart *usart = get_usart_by_chan(uart_chan);
 	switch (rxtx) {
 	case ENABLE_TX:
-		card_emu_uart_set_direction(uart_chan, true);
-		USART_DisableIt(usart, ~(US_IER_TXRDY | US_IER_TIMEOUT));
+		USART_DisableIt(usart, ~US_IER_TXRDY);
 		/* as irritating as it is, we actually want to keep the
 		 * receiver enabled during transmit */
 		USART_SetReceiverEnabled(usart, 1);
 		usart->US_CR = US_CR_RSTSTA | US_CR_RSTIT | US_CR_RSTNACK;
-		USART_EnableIt(usart, US_IER_TXRDY | US_IER_TIMEOUT);
-		USART_SetTransmitterEnabled(usart, 1);
-		break;
-	case ENABLE_TX_TIMER_ONLY:
-		/* enable the transmitter without generating TXRDY interrupts
-		 * just so that the timer can run */
-		USART_DisableIt(usart, ~US_IER_TIMEOUT);
-		/* as irritating as it is, we actually want to keep the
-		 * receiver enabled during transmit */
-		USART_SetReceiverEnabled(usart, 1);
-		usart->US_CR = US_CR_RSTSTA | US_CR_RSTIT | US_CR_RSTNACK;
-		USART_EnableIt(usart, US_IER_TIMEOUT);
+		USART_EnableIt(usart, US_IER_TXRDY);
 		USART_SetTransmitterEnabled(usart, 1);
 		break;
 	case ENABLE_RX:
@@ -204,7 +168,6 @@ void card_emu_uart_enable(uint8_t uart_chan, uint8_t rxtx)
 		 * transmitter enabled during receive */
 		USART_SetTransmitterEnabled(usart, 1);
 		wait_tx_idle(usart);
-		card_emu_uart_set_direction(uart_chan, false);;
 		usart->US_CR = US_CR_RSTSTA | US_CR_RSTIT | US_CR_RSTNACK;
 		USART_EnableIt(usart, US_IER_RXRDY);
 		USART_SetReceiverEnabled(usart, 1);
@@ -244,25 +207,8 @@ int card_emu_uart_tx(uint8_t uart_chan, uint8_t byte)
 	return 1;
 }
 
-static uint16_t compute_next_timeout(struct cardem_inst *ci)
-{
-	uint32_t want_to_expire;
 
-	if (ci->wt.total == 0)
-		return 0;
-
-	if (!ci->wt.half_time_notified) {
-		/* we need to make sure to expire after half the total waiting time */
-		OSMO_ASSERT(ci->wt.remaining > (ci->wt.total / 2));
-		want_to_expire = ci->wt.remaining - (ci->wt.total / 2);
-	} else
-		want_to_expire = ci->wt.remaining;
-	/* if value exceeds the USART TO range, use the maximum possible value for one round */
-	return OSMO_MIN(want_to_expire, 0xffff);
-}
-
-/*! common handler if interrupt was received.
- *  \param[in] inst_num Instance number, range 0..1 (some boards only '0' permitted) */
+/* FIXME: integrate this with actual irq handler */
 static void usart_irq_rx(uint8_t inst_num)
 {
 	Usart *usart = get_usart_by_chan(inst_num);
@@ -270,84 +216,32 @@ static void usart_irq_rx(uint8_t inst_num)
 	uint32_t csr;
 	uint8_t byte = 0;
 
-	/* get one atomic snapshot of state/flags before they get changed */
 	csr = usart->US_CSR & usart->US_IMR;
 
-	/* check if one byte has been completely received and is now in the holding register */
 	if (csr & US_CSR_RXRDY) {
-		/* read the bye from the holding register */
 		byte = (usart->US_RHR) & 0xFF;
-		/* append it to the buffer */
 		if (rbuf_write(&ci->rb, byte) < 0)
 			TRACE_ERROR("rbuf overrun\r\n");
 	}
 
-	/* check if the transmitter is ready for the next byte */
 	if (csr & US_CSR_TXRDY) {
-		/* transmit next byte and check if more bytes are to be transmitted */
-		if (card_emu_tx_byte(ci->ch) == 0) {
-			/* stop the TX ready interrupt of no more bytes to transmit */
+		if (card_emu_tx_byte(ci->ch) == 0)
 			USART_DisableIt(usart, US_IER_TXRDY);
-		}
 	}
 
-	/* check if any error flags are set */
-	if (csr & (US_CSR_OVRE|US_CSR_FRAME|US_CSR_PARE|US_CSR_NACK|(1<<10))) {
-		/* clear any error flags */
+	if (csr & (US_CSR_OVRE|US_CSR_FRAME|US_CSR_PARE|
+		   US_CSR_TIMEOUT|US_CSR_NACK|(1<<10))) {
 		usart->US_CR = US_CR_RSTSTA | US_CR_RSTIT | US_CR_RSTNACK;
-		TRACE_ERROR("%u USART error on 0x%x status: 0x%lx\n", ci->num, byte, csr);
-	}
-
-	/* check if the timeout has expired. We "abuse" the receive timer for tracking
-	 * how many etu have expired since we last sent a byte.  See section
-	 * 33.7.3.11 "Receiver Time-out" of the SAM3S8 Data Sheet */
-	if (csr & US_CSR_TIMEOUT) {
-		/* clear timeout flag (and stop timeout until next character is received) */
-		usart->US_CR |= US_CR_STTTO;
-
-		/* RX has been inactive for some time */
-		if (ci->wt.remaining <= (usart->US_RTOR & 0xffff)) {
-			/* waiting time is over; will stop the timer */
-			ci->wt.remaining = 0;
-		} else {
-			/* subtract the actual timeout since the new might not have been set and
-			 * reloaded yet */
-			ci->wt.remaining -= (usart->US_RTOR & 0xffff);
-		}
-		if (ci->wt.remaining == 0) {
-			/* let the FSM know that WT has expired */
-			card_emu_wtime_expired(ci->ch);
-			/* don't automatically re-start in this case */
-		} else {
-			bool half_time_just_reached = false;
-
-			if (ci->wt.remaining <= ci->wt.total / 2 && !ci->wt.half_time_notified) {
-				ci->wt.half_time_notified = true;
-				/* don't immediately call card_emu_wtime_half_expired(), as that
-				 * in turn may calls card_emu_uart_update_wt() which will change
-				 * the timeout but would be overridden 4 lines below */
-				half_time_just_reached = true;
-			}
-
-			/* update the counter no matter if we reached half time or not */
-			usart->US_RTOR = compute_next_timeout(ci);
-			/* restart the counter (if wt is 0, the timeout is not started) */
-			usart->US_CR |= US_CR_RETTO;
-
-			if (half_time_just_reached)
-				card_emu_wtime_half_expired(ci->ch);
-		}
+		TRACE_ERROR("%u e 0x%x st: 0x%lx\n", ci->num, byte, csr);
 	}
 }
 
-/*! ISR called for USART0 */
 void mode_cardemu_usart0_irq(void)
 {
 	/* USART0 == Instance 1 == USIM 2 */
 	usart_irq_rx(1);
 }
 
-/*! ISR called for USART1 */
 void mode_cardemu_usart1_irq(void)
 {
 	/* USART1 == Instance 0 == USIM 1 */
@@ -366,41 +260,6 @@ int card_emu_uart_update_fidi(uint8_t uart_chan, unsigned int fidi)
 	return 0;
 }
 
-/*! Update WT on USART peripheral.  Will automatically re-start timer with new value.
- *  \param[in] usart USART peripheral to configure
- *  \param[in] wt inactivity Waiting Time before card_emu_wtime_expired is called (0 to disable) */
-void card_emu_uart_update_wt(uint8_t uart_chan, uint32_t wt)
-{
-	OSMO_ASSERT(uart_chan < ARRAY_SIZE(cardem_inst));
-	struct cardem_inst *ci = &cardem_inst[uart_chan];
-	Usart *usart = get_usart_by_chan(uart_chan);
-
-	if (ci->wt.total != wt) {
-		TRACE_DEBUG("%u: USART WT changed from %lu to %lu ETU\r\n", uart_chan,
-			    ci->wt.total, wt);
-	}
-
-	ci->wt.total = wt;
-	/* reset and start the timer */
-	card_emu_uart_reset_wt(uart_chan);
-}
-
-/*! Reset and re-start waiting timeout count down on USART peripheral.
- *  \param[in] usart USART peripheral to configure */
-void card_emu_uart_reset_wt(uint8_t uart_chan)
-{
-	OSMO_ASSERT(uart_chan < ARRAY_SIZE(cardem_inst));
-	struct cardem_inst *ci = &cardem_inst[uart_chan];
-	Usart *usart = get_usart_by_chan(uart_chan);
-
-	/* FIXME: guard against race with interrupt handler */
-	ci->wt.remaining = ci->wt.total;
-	ci->wt.half_time_notified = false;
-	usart->US_RTOR = compute_next_timeout(ci);
-	/* restart the counter (if wt is 0, the timeout is not started) */
-	usart->US_CR |= US_CR_RETTO;
-}
-
 /* call-back from card_emu.c to force a USART interrupt */
 void card_emu_uart_interrupt(uint8_t uart_chan)
 {
@@ -420,9 +279,6 @@ void card_emu_uart_interrupt(uint8_t uart_chan)
  ***********************************************************************/
 
 #ifdef DETECT_VCC_BY_ADC
-#if !defined(VCC_UV_THRESH_1V8) || !defined(VCC_UV_THRESH_3V)
-#error "You must define VCC_UV_THRESH_{1V1,3V} if you use ADC VCC detection"
-#endif
 
 static volatile int adc_triggered = 0;
 static int adc_sam3s_reva_errata = 0;
@@ -471,13 +327,12 @@ static int card_vcc_adc_init(void)
 	return 0;
 }
 
+#define VCC_UV_THRESH_1V8	1500000
+#define VCC_UV_THRESH_3V	2500000
+
 static void process_vcc_adc(struct cardem_inst *ci)
 {
-#ifdef octsimtest
-	if (ci->vcc_uv >= VCC_UV_THRESH_1V8)
-#else
 	if (ci->vcc_uv >= VCC_UV_THRESH_3V)
-#endif
 		ci->vcc_active = true;
 	else
 		ci->vcc_active = false;
@@ -578,26 +433,20 @@ void mode_cardemu_init(void)
 	INIT_LLIST_HEAD(&cardem_inst[0].usb_out_queue);
 	rbuf_reset(&cardem_inst[0].rb);
 	PIO_Configure(pins_usim1, PIO_LISTSIZE(pins_usim1));
-
-	/* configure USART as ISO-7816 slave (e.g. card) */
 	ISO7816_Init(&cardem_inst[0].usart_info, CLK_SLAVE);
-	NVIC_EnableIRQ(FIRST_USART_IRQ);
+	NVIC_EnableIRQ(USART1_IRQn);
 	PIO_ConfigureIt(&pin_usim1_rst, usim1_rst_irqhandler);
 	PIO_EnableIt(&pin_usim1_rst);
-
-	/* obtain current RST state */
-	usim1_rst_irqhandler(&pin_usim1_rst);
+	usim1_rst_irqhandler(&pin_usim1_rst); /* obtain current RST state */
 #ifndef DETECT_VCC_BY_ADC
 	PIO_ConfigureIt(&pin_usim1_vcc, usim1_vcc_irqhandler);
 	PIO_EnableIt(&pin_usim1_vcc);
-
-	/* obtain current VCC state */
-	usim1_vcc_irqhandler(&pin_usim1_vcc);
+	usim1_vcc_irqhandler(&pin_usim1_vcc); /* obtain current VCC state */
 #else
 	do {} while (!adc_triggered); /* wait for first ADC reading */
 #endif /* DETECT_VCC_BY_ADC */
 
-	cardem_inst[0].ch = card_emu_init(0, 0, SIMTRACE_CARDEM_USB_EP_USIM1_DATAIN,
+	cardem_inst[0].ch = card_emu_init(0, 2, 0, SIMTRACE_CARDEM_USB_EP_USIM1_DATAIN,
 					  SIMTRACE_CARDEM_USB_EP_USIM1_INT, cardem_inst[0].vcc_active,
 					  cardem_inst[0].rst_active, cardem_inst[0].vcc_active);
 	sim_switch_use_physical(0, 1);
@@ -607,7 +456,6 @@ void mode_cardemu_init(void)
 	rbuf_reset(&cardem_inst[1].rb);
 	PIO_Configure(pins_usim2, PIO_LISTSIZE(pins_usim2));
 	ISO7816_Init(&cardem_inst[1].usart_info, CLK_SLAVE);
-	/* TODO enable timeout */
 	NVIC_EnableIRQ(USART0_IRQn);
 	PIO_ConfigureIt(&pin_usim2_rst, usim2_rst_irqhandler);
 	PIO_EnableIt(&pin_usim2_rst);
@@ -620,11 +468,10 @@ void mode_cardemu_init(void)
 	do {} while (!adc_triggered); /* wait for first ADC reading */
 #endif /* DETECT_VCC_BY_ADC */
 
-	cardem_inst[1].ch = card_emu_init(1, 1, SIMTRACE_CARDEM_USB_EP_USIM2_DATAIN,
+	cardem_inst[1].ch = card_emu_init(1, 0, 1, SIMTRACE_CARDEM_USB_EP_USIM2_DATAIN,
 					  SIMTRACE_CARDEM_USB_EP_USIM2_INT, cardem_inst[1].vcc_active,
 					  cardem_inst[1].rst_active, cardem_inst[1].vcc_active);
 	sim_switch_use_physical(1, 1);
-	/* TODO check RST and VCC */
 #endif /* CARDEMU_SECOND_UART */
 }
 
@@ -639,9 +486,9 @@ void mode_cardemu_exit(void)
 	PIO_DisableIt(&pin_usim1_rst);
 	PIO_DisableIt(&pin_usim1_vcc);
 
-	NVIC_DisableIRQ(FIRST_USART_IRQ);
-	USART_SetTransmitterEnabled(FIRST_USART_BASE, 0);
-	USART_SetReceiverEnabled(FIRST_USART_BASE, 0);
+	NVIC_DisableIRQ(USART1_IRQn);
+	USART_SetTransmitterEnabled(USART1, 0);
+	USART_SetReceiverEnabled(USART1, 0);
 
 #ifdef CARDEMU_SECOND_UART
 	PIO_DisableIt(&pin_usim2_rst);
@@ -668,26 +515,6 @@ static void dispatch_usb_command_generic(struct msgb *msg, struct cardem_inst *c
 	usb_buf_free(msg);
 }
 
-static void process_card_insert(struct cardem_inst *ci, bool card_insert)
-{
-	TRACE_INFO("%u: set card_insert to %s\r\n", ci->num, card_insert ? "INSERTED" : "REMOVED");
-
-#ifdef HAVE_BOARD_CARDINSERT
-	board_set_card_insert(ci, card_insert);
-#else
-	if (!ci->pin_insert.pio) {
-		TRACE_INFO("%u: skipping unsupported card_insert to %s\r\n",
-			   ci->num, card_insert ? "INSERTED" : "REMOVED");
-		return;
-	}
-
-	if (card_insert)
-		PIO_Set(&ci->pin_insert);
-	else
-		PIO_Clear(&ci->pin_insert);
-#endif
-}
-
 /* handle a single USB command as received from the USB host */
 static void dispatch_usb_command_cardem(struct msgb *msg, struct cardem_inst *ci)
 {
@@ -711,7 +538,18 @@ static void dispatch_usb_command_cardem(struct msgb *msg, struct cardem_inst *ci
 		break;
 	case SIMTRACE_MSGT_DT_CEMU_CARDINSERT:
 		cardins = (struct cardemu_usb_msg_cardinsert *) msg->l2h;
-		process_card_insert(ci, cardins->card_insert);
+		if (!ci->pin_insert.pio) {
+			TRACE_INFO("%u: skipping unsupported card_insert to %s\r\n",
+				   ci->num, cardins->card_insert ? "INSERTED" : "REMOVED");
+			usb_buf_free(msg);
+			break;
+		}
+		TRACE_INFO("%u: set card_insert to %s\r\n", ci->num,
+			   cardins->card_insert ? "INSERTED" : "REMOVED");
+		if (cardins->card_insert)
+			PIO_Set(&ci->pin_insert);
+		else
+			PIO_Clear(&ci->pin_insert);
 		usb_buf_free(msg);
 		break;
 	case SIMTRACE_MSGT_BD_CEMU_STATUS:
@@ -721,7 +559,6 @@ static void dispatch_usb_command_cardem(struct msgb *msg, struct cardem_inst *ci
 	case SIMTRACE_MSGT_BD_CEMU_CONFIG:
 		cfg = (struct cardemu_usb_msg_config *) msg->l2h;
 		card_emu_set_config(ci->ch, cfg, msgb_l2len(msg));
-		usb_buf_free(msg);
 		break;
 	case SIMTRACE_MSGT_BD_CEMU_STATS:
 	default:
@@ -798,8 +635,9 @@ static void dispatch_usb_command_modem(struct msgb *msg, struct cardem_inst *ci)
 }
 
 /* handle a single USB command as received from the USB host */
-static void dispatch_usb_command(struct msgb *msg, struct cardem_inst *ci)
+static void dispatch_usb_command(struct msgb *msg, const struct usb_if *usb_if)
 {
+	struct cardem_inst *ci = usb_if->data;
 	struct simtrace_msg_hdr *sh = (struct simtrace_msg_hdr *) msg->l1h;
 
 	if (msgb_length(msg) < sizeof(*sh)) {
@@ -828,7 +666,8 @@ static void dispatch_usb_command(struct msgb *msg, struct cardem_inst *ci)
 	}
 }
 
-static void dispatch_received_msg(struct msgb *msg, struct cardem_inst *ci)
+/* handle a single USB transfer as received from the USB host */
+static void dispatch_received_usb_msg(struct msgb *msg, const struct usb_if *usb_if)
 {
 	struct msgb *segm;
 	struct simtrace_msg_hdr *mh;
@@ -839,7 +678,7 @@ static void dispatch_received_msg(struct msgb *msg, struct cardem_inst *ci)
 	mh = (struct simtrace_msg_hdr *) msg->data;
 	if (mh->msg_len == msgb_length(msg)) {
 		/* fast path: only one message in buffer */
-		dispatch_usb_command(msg, ci);
+		dispatch_usb_command(msg, usb_if);
 		return;
 	}
 
@@ -848,23 +687,23 @@ static void dispatch_received_msg(struct msgb *msg, struct cardem_inst *ci)
 	while (1) {
 		mh = (struct simtrace_msg_hdr *) msg->data;
 
-		segm = usb_buf_alloc(ci->ep_out);
+		segm = usb_buf_alloc(usb_if->ep_out);
 		if (!segm) {
 			TRACE_ERROR("%u: ENOMEM during msg segmentation\r\n",
-				    ci->num);
+				    usb_if->if_num);
 			break;
 		}
 
 		if (mh->msg_len > msgb_length(msg)) {
 			TRACE_ERROR("%u: Unexpected large message (%u bytes)\r\n",
-					ci->num, mh->msg_len);
+					usb_if->if_num, mh->msg_len);
 			usb_buf_free(segm);
 			break;
 		} else {
 			uint8_t *cur = msgb_put(segm, mh->msg_len);
 			segm->l1h = segm->head;
 			memcpy(cur, mh, mh->msg_len);
-			dispatch_usb_command(segm, ci);
+			dispatch_usb_command(segm, usb_if);
 		}
 		/* pull this message */
 		msgb_pull(msg, mh->msg_len);
@@ -876,35 +715,14 @@ static void dispatch_received_msg(struct msgb *msg, struct cardem_inst *ci)
 	usb_buf_free(msg);
 }
 
-/* iterate over the queue of incoming USB commands and dispatch/execute
- * them */
-static void process_any_usb_commands(struct llist_head *main_q,
-				     struct cardem_inst *ci)
-{
-	struct llist_head *lh;
-	struct msgb *msg;
-	int i;
-
-	/* limit the number of iterations to 10, to ensure we don't get
-	 * stuck here without returning to main loop processing */
-	for (i = 0; i < 10; i++) {
-		/* de-queue the list head in an irq-safe way */
-		lh = llist_head_dequeue_irqsafe(main_q);
-		if (!lh)
-			break;
-		msg = llist_entry(lh, struct msgb, list);
-		dispatch_received_msg(msg, ci);
-	}
-}
-
 /* main loop function, called repeatedly */
 void mode_cardemu_run(void)
 {
-	struct llist_head *queue;
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(cardem_inst); i++) {
 		struct cardem_inst *ci = &cardem_inst[i];
+		struct usb_if *usb_if = &ci->usb_if;
 
 		/* drain the ring buffer from UART into card_emu */
 		while (1) {
@@ -921,16 +739,6 @@ void mode_cardemu_run(void)
 
 		process_io_statechg(ci);
 
-		/* first try to send any pending messages on IRQ */
-		usb_refill_to_host(ci->ep_int);
-
-		/* then try to send any pending messages on IN */
-		usb_refill_to_host(ci->ep_in);
-
-		/* ensure we can handle incoming USB messages from the
-		 * host */
-		usb_refill_from_host(ci->ep_out);
-		queue = usb_get_queue(ci->ep_out);
-		process_any_usb_commands(queue, ci);
+		usb_process(&ci->usb_if);
 	}
 }

firmware/libcommon/source/simtrace_iso7816.c

@@ -125,7 +125,7 @@ void update_fidi(Usart_info *usart, uint8_t fidi)
 
 	uint8_t fi = fidi >> 4;
 	uint8_t di = fidi & 0xf;
-	int ratio = iso7816_3_compute_fd_ratio(fi, di);
+	int ratio = compute_fidi_ratio(fi, di);
 
 	if (ratio > 0 && ratio < 0x8000) {
 		/* make sure USART uses new F/D ratio */

firmware/libcommon/source/sniffer.c

@@ -658,10 +658,9 @@ static void process_byte_pps(uint8_t byte)
 					fn = 1;
 					dn = 1;
 				}
-				TRACE_INFO("PPS negotiation successful: Fn=%u Dn=%u\n\r",
-					   iso7816_3_fi_table[fn], iso7816_3_di_table[dn]);
+				TRACE_INFO("PPS negotiation successful: Fn=%u Dn=%u\n\r", fi_table[fn], di_table[dn]);
 				update_fidi(&sniff_usart, pps_cur[2]);
-				update_wt(0, iso7816_3_di_table[dn]);
+				update_wt(0, di_table[dn]);
 				usb_send_fidi(pps_cur[2]); /* send Fi/Di change notification to host software over USB */
 			} else { /* checksum is invalid */
 				TRACE_INFO("PPS negotiation failed\n\r");
@@ -975,20 +974,42 @@ static void usb_send_change(uint32_t flags)
 	usb_msg_upd_len_and_submit(usb_msg);
 }
 
+/* handle incoming message from USB OUT EP */
+static void dispatch_usb_out(struct msgb *msg, const struct usb_if *usb_if)
+{
+	struct simtrace_msg_hdr *sh = (Struct simtrace_msg_hdr *) msg->l1h;
+
+	if (msg_length(msg) < sizeof(*sh)) {
+		usb_buf_free(msg);
+		return;
+	}
+	msg->l2h = msg->l1h + sizeof(*sh);
+
+	switch (sh->msg_class) {
+	case SIMTRACE_MSGC_GENERIC:
+		break;
+	default:
+		break;
+	}
+
+	usb_buf_free(msg);
+}
+
+static const struct usb_if sniffer_usb_if = {
+	.if_num = 0,
+	.ep_in = SIMTRACE_USB_EP_CARD_DATAIN,
+	.ep_int = SIMTRACE_USB_EP_CARD_INT,
+	.ep_out = SIMTRACE_USB_EP_CARD_DATAOUT,
+	.ops = {
+		.rx_out = dispatch_usb_out,
+	}
+};
+
 /* Main (idle/busy) loop of this USB configuration */
 void Sniffer_run(void)
 {
 	/* Handle USB queue */
-	/* first try to send any pending messages on INT */
-	usb_refill_to_host(SIMTRACE_USB_EP_CARD_INT);
-	/* then try to send any pending messages on IN */
-	usb_refill_to_host(SIMTRACE_USB_EP_CARD_DATAIN);
-	/* ensure we can handle incoming USB messages from the host */
-	/* currently we don't need any incoming data
-	usb_refill_from_host(SIMTRACE_USB_EP_CARD_DATAOUT);
-	struct llist_head *queue = usb_get_queue(SIMTRACE_USB_EP_CARD_DATAOUT);
-	process_any_usb_commands(queue);
-	*/
+	usb_process(&sniffer_usb_if);
 
 	/* WARNING: the signal data and flags are not synchronized. We have to hope 
 	 * the processing is fast enough to not land in the wrong state while data

firmware/libcommon/source/stack_check.c

@@ -1,14 +0,0 @@
-#include <stdint.h>
-#include <osmocom/core/panic.h>
-
-/* This is what's minimally required to fix builds on Ubuntu 20.04,
- * where stack smashing protection is enabled by default when using dpkg
- * - even when cross-compiling: https://osmocom.org/issues/4687
- */
-
-uintptr_t __stack_chk_guard = 0xdeadbeef;
-
-void __stack_chk_fail(void)
-{
-	osmo_panic("Stack smashing detected!\r\n");
-}

firmware/libcommon/source/usb.c

@@ -689,8 +689,16 @@ void SIMtrace_USB_Initialize(void)
 {
 	unsigned int i;
 	/* Signal USB reset by disabling the pull-up on USB D+ for at least 10 ms */
+#ifdef PIN_USB_PULLUP
+	const Pin usb_dp_pullup = PIN_USB_PULLUP;
+	PIO_Configure(&usb_dp_pullup, 1);
+	PIO_Set(&usb_dp_pullup);
+#endif
 	USBD_HAL_Suspend();
-	mdelay(500);
+	mdelay(20);
+#ifdef PIN_USB_PULLUP
+	PIO_Clear(&usb_dp_pullup);
+#endif
 	USBD_HAL_Activate();
 
 	// Get std USB driver

firmware/libosmocore/source/panic.c

@@ -46,7 +46,7 @@ static osmo_panic_handler_t osmo_panic_handler = (void*)0;
 __attribute__ ((format (printf, 1, 0)))
 static void osmo_panic_default(const char *fmt, va_list args)
 {
-	vfprintf_sync(stderr, fmt, args);
+	vfprintf(stderr, fmt, args);
 	osmo_generate_backtrace();
 	assert(0);
 }

firmware/test/card_emu_tests.c

@@ -13,20 +13,6 @@
 #define PHONE_INT	2
 #define PHONE_DATAOUT	3
 
-/* stub for stdio */
-signed int printf_sync(const char *pFormat, ...)
-{
-	va_list ap;
-	signed int result;
-
-	va_start(ap, pFormat);
-	result = vprintf(pFormat, ap);
-	va_end(ap);
-
-	return result;
-}
-
-
 /***********************************************************************
  * stub functions required by card_emu.c
  ***********************************************************************/
@@ -64,9 +50,6 @@ void card_emu_uart_enable(uint8_t uart_chan, uint8_t rxtx)
 	case ENABLE_TX:
 		rts = "TX";
 		break;
-	case ENABLE_TX_TIMER_ONLY:
-		rts = "TX-TIMER-ONLY";
-		break;
 	case ENABLE_RX:
 		rts = "RX";
 		break;
@@ -83,14 +66,29 @@ void card_emu_uart_interrupt(uint8_t uart_chan)
 	printf("uart_interrupt(uart_chan=%u)\n", uart_chan);
 }
 
-void card_emu_uart_update_wt(uint8_t uart_chan, uint32_t wt)
+void tc_etu_set_wtime(uint8_t tc_chan, uint16_t wtime)
 {
-	printf("%s(uart_chan=%u, wtime=%u)\n", __func__, uart_chan, wt);
+	printf("tc_etu_set_wtime(tc_chan=%u, wtime=%u)\n", tc_chan, wtime);
 }
 
-void card_emu_uart_reset_wt(uint8_t uart_chan)
+void tc_etu_set_etu(uint8_t tc_chan, uint16_t etu)
 {
-	printf("%s(uart_chan=%u\n", __func__, uart_chan);
+	printf("tc_etu_set_etu(tc_chan=%u, etu=%u)\n", tc_chan, etu);
+}
+
+void tc_etu_init(uint8_t chan_nr, void *handle)
+{
+	printf("tc_etu_init(tc_chan=%u)\n", chan_nr);
+}
+
+void tc_etu_enable(uint8_t chan_nr)
+{
+	printf("tc_etu_enable(tc_chan=%u)\n", chan_nr);
+}
+
+void tc_etu_disable(uint8_t chan_nr)
+{
+	printf("tc_etu_disable(tc_chan=%u)\n", chan_nr);
 }
 
 
@@ -138,7 +136,7 @@ static void io_start_card(struct card_handle *ch)
 	/* release from reset and verify th ATR */
 	card_emu_io_statechg(ch, CARD_IO_RST, 0);
 	/* simulate waiting time before ATR expired */
-	card_emu_wtime_expired(ch);
+	tc_etu_wtime_expired(ch);
 	verify_atr(ch);
 }
 
@@ -410,7 +408,7 @@ int main(int argc, char **argv)
 	struct card_handle *ch;
 	unsigned int i;
 
-	ch = card_emu_init(0, 42, PHONE_DATAIN, PHONE_INT, false, true, false);
+	ch = card_emu_init(0, 23, 42, PHONE_DATAIN, PHONE_INT, false, true, false);
 	assert(ch);
 
 	usb_buf_init();

host/.gitignore

@@ -34,4 +34,5 @@ libtool
 
 simtrace2-list
 simtrace2-sniff
-simtrace2-cardem-pcsc
+simtrace2-remsim
+simtrace2-remsim-usb2udp

host/Makefile.am

@@ -3,7 +3,7 @@ AUTOMAKE_OPTIONS = foreign dist-bzip2 1.6
 AM_CPPFLAGS = $(all_includes) -I$(top_srcdir)/include
 SUBDIRS = include lib src contrib #tests examples doc
 
-EXTRA_DIST = .version
+EXTRA_DIST = .version git-version-gen
 
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = libosmo-simtrace2.pc

host/Makefile.old

@@ -0,0 +1,28 @@
+LDFLAGS+=`pkg-config --libs libusb-1.0 libosmocore` -pthread
+CFLAGS=-Wall -g
+
+APPS=simtrace2-remsim simtrace2-remsim-usb2udp simtrace2-list simtrace2-sniff
+
+all: $(APPS)
+
+simtrace2-remsim: simtrace2-remsim.o apdu_dispatch.o simtrace2-discovery.o simtrace2_api.o libusb_util.o
+	$(CC) -o $@ $^ $(LDFLAGS) `pkg-config --libs libosmosim libpcsclite`
+
+simtrace2-remsim-usb2udp: usb2udp.o simtrace2-discovery.o
+	$(CC) -o $@ $^ $(LDFLAGS)
+
+simtrace2-list: simtrace2_usb.o libusb_util.o
+	$(CC) -o $@ $^ $(LDFLAGS)
+
+simtrace2-sniff: simtrace2-sniff.o simtrace2-discovery.o libusb_util.o
+	$(CC) -o $@ $^ $(LDFLAGS)
+
+%.o: %.c
+	$(CC) $(CFLAGS) `pkg-config --cflags libusb-1.0 libosmocore` -o $@ -c $^
+
+clean:
+	@rm -f *.o $(APPS)
+
+install: $(APPS)
+	mkdir -p $(DESTDIR)/usr/bin
+	cp $(APPS) $(DESTDIR)/usr/bin/

host/configure.ac

@@ -1,5 +1,5 @@
 AC_INIT([simtrace2],
-	m4_esyscmd([../git-version-gen ../.tarball-version]),
+	m4_esyscmd([./git-version-gen .tarball-version]),
 	[simtrace@lists.osmocom.org])
 
 dnl *This* is the root dir, even if an install-sh exists in ../ or ../../
@@ -56,9 +56,9 @@ AC_COMPILE_IFELSE([AC_LANG_SOURCE([char foo;])],
 CFLAGS="$saved_CFLAGS"
 AC_SUBST(SYMBOL_VISIBILITY)
 
-PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 1.4.0)
-PKG_CHECK_MODULES(LIBOSMOSIM, libosmosim >= 1.4.0)
-PKG_CHECK_MODULES(LIBOSMOUSB, libosmousb >= 1.4.0)
+PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 1.0.0)
+PKG_CHECK_MODULES(LIBOSMOSIM, libosmosim >= 1.0.0)
+PKG_CHECK_MODULES(LIBOSMOUSB, libosmousb >= 0.0.0)
 PKG_CHECK_MODULES(LIBUSB, libusb-1.0)
 
 AC_ARG_ENABLE(sanitize,
@@ -100,5 +100,4 @@ AC_OUTPUT(
 	src/Makefile
 	lib/Makefile
 	contrib/Makefile
-	contrib/simtrace2.spec
 	Makefile)

host/contrib/99-simtrace2.rules

@@ -16,10 +16,6 @@ ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="4002", GROUP="plugdev"
 # sysmocom QMOD SAM3 (DFU and runtime)
 ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="4003", GROUP="plugdev"
 ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="4004", GROUP="plugdev"
-# sysmocom OCTSIMTEST
-ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="616d", GROUP="plugdev"
-# ngff-cardem
-ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="616e", GROUP="plugdev"
 
 # All done
 LABEL="simtrace2_rules_end"

host/contrib/simtrace2.spec.in

@@ -1,100 +0,0 @@
-#
-# spec file for package simtrace2
-#
-# Copyright (c) 2018, Martin Hauke <mardnh@gmx.de>
-#
-# All modifications and additions to the file contributed by third parties
-# remain the property of their copyright owners, unless otherwise agreed
-# upon. The license for this file, and modifications and additions to the
-# file, is the same license as for the pristine package itself (unless the
-# license for the pristine package is not an Open Source License, in which
-# case the license is the MIT License). An "Open Source License" is a
-# license that conforms to the Open Source Definition (Version 1.9)
-# published by the Open Source Initiative.
-
-Name:           simtrace2
-Version:        @VERSION@
-Release:        0
-Summary:        Osmocom SIMtrace host utility
-License:        GPL-2.0-or-later
-Group:          Productivity/Telephony/Utilities
-URL:            https://osmocom.org/projects/simtrace2/wiki
-Source:         %{name}-%{version}.tar.xz
-BuildRequires:  autoconf
-BuildRequires:  automake
-BuildRequires:  libtool
-BuildRequires:  pkgconfig
-BuildRequires:  pkgconfig(libosmocore)
-BuildRequires:  pkgconfig(libosmosim)
-BuildRequires:  pkgconfig(libpcsclite)
-BuildRequires:  pkgconfig(libusb-1.0)
-BuildRequires:  pkgconfig(libosmousb) >= 0.0.0
-BuildRequires:  pkgconfig(udev)
-
-%description
-Osmocom SIMtrace 2 is a software and hardware system for passively
-tracing SIM-ME communication between the SIM card and the mobile phone,
-and remote SIM operation.
-
-This package contains SIMtrace 2 host utility.
-
-%package -n libosmo-simtrace2-1
-Summary:        Shared Library part of libosmo-simtrace2
-Group:          System/Libraries
-
-%description -n libosmo-simtrace2-1
-This library contains core "driver" functionality to interface with the
-Osmocom SIMtrace2 (and compatible) USB device firmware.  It enables
-applications to implement SIM card / smart card tracing as well as
-SIM / smart card emulation functions.
-
-%package -n libosmo-simtrace2-devel
-Summary:        Development files for the Osmocom SIMtrace2 library
-Group:          Development/Libraries/C and C++
-Requires:       libosmo-simtrace2-1 = %{version}
-
-%description -n libosmo-simtrace2-devel
-Osmocom SIMtrace2 (and compatible) USB device firmware.  It enables
-applications to implement SIM card / smart card tracing as well as
-SIM / smart card emulation functions.
-
-This subpackage contains libraries and header files for developing
-applications that want to make use of libosmo-simtrace2.
-
-%prep
-%setup -q
-
-%build
-cd host
-echo "%{version}" >.tarball-version
-autoreconf -fiv
-%configure --disable-static
-make %{?_smp_mflags}
-
-%install
-%make_install -C host
-install -Dm0644 host/contrib/99-simtrace2.rules %{buildroot}/%{_udevrulesdir}/99-simtrace2.rules
-find %{buildroot} -type f -name "*.la" -delete -print
-
-%post   -n libosmo-simtrace2-1 -p /sbin/ldconfig
-%postun -n libosmo-simtrace2-1 -p /sbin/ldconfig
-
-%files
-%doc README.md
-%{_bindir}/simtrace2-cardem-pcsc
-%{_bindir}/simtrace2-list
-%{_bindir}/simtrace2-sniff
-%{_bindir}/simtrace2-tool
-%{_udevrulesdir}/99-simtrace2.rules
-
-%files -n libosmo-simtrace2-1
-%{_libdir}/libosmo-simtrace2.so.1*
-
-%files -n libosmo-simtrace2-devel
-%dir %{_includedir}/osmocom/
-%dir %{_includedir}/osmocom/simtrace2/
-%{_includedir}/osmocom/simtrace2/*.h
-%{_libdir}/libosmo-simtrace2.so
-%{_libdir}/pkgconfig/libosmo-simtrace2.pc
-
-%changelog

host/git-version-gen

@@ -0,0 +1,151 @@
+#!/bin/sh
+# Print a version string.
+scriptversion=2010-01-28.01
+
+# Copyright (C) 2007-2010 Free Software Foundation, Inc.
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# This script is derived from GIT-VERSION-GEN from GIT: http://git.or.cz/.
+# It may be run two ways:
+# - from a git repository in which the "git describe" command below
+#   produces useful output (thus requiring at least one signed tag)
+# - from a non-git-repo directory containing a .tarball-version file, which
+#   presumes this script is invoked like "./git-version-gen .tarball-version".
+
+# In order to use intra-version strings in your project, you will need two
+# separate generated version string files:
+#
+# .tarball-version - present only in a distribution tarball, and not in
+#   a checked-out repository.  Created with contents that were learned at
+#   the last time autoconf was run, and used by git-version-gen.  Must not
+#   be present in either $(srcdir) or $(builddir) for git-version-gen to
+#   give accurate answers during normal development with a checked out tree,
+#   but must be present in a tarball when there is no version control system.
+#   Therefore, it cannot be used in any dependencies.  GNUmakefile has
+#   hooks to force a reconfigure at distribution time to get the value
+#   correct, without penalizing normal development with extra reconfigures.
+#
+# .version - present in a checked-out repository and in a distribution
+#   tarball.  Usable in dependencies, particularly for files that don't
+#   want to depend on config.h but do want to track version changes.
+#   Delete this file prior to any autoconf run where you want to rebuild
+#   files to pick up a version string change; and leave it stale to
+#   minimize rebuild time after unrelated changes to configure sources.
+#
+# It is probably wise to add these two files to .gitignore, so that you
+# don't accidentally commit either generated file.
+#
+# Use the following line in your configure.ac, so that $(VERSION) will
+# automatically be up-to-date each time configure is run (and note that
+# since configure.ac no longer includes a version string, Makefile rules
+# should not depend on configure.ac for version updates).
+#
+# AC_INIT([GNU project],
+#         m4_esyscmd([build-aux/git-version-gen .tarball-version]),
+#         [bug-project@example])
+#
+# Then use the following lines in your Makefile.am, so that .version
+# will be present for dependencies, and so that .tarball-version will
+# exist in distribution tarballs.
+#
+# BUILT_SOURCES = $(top_srcdir)/.version
+# $(top_srcdir)/.version:
+#	echo $(VERSION) > $@-t && mv $@-t $@
+# dist-hook:
+#	echo $(VERSION) > $(distdir)/.tarball-version
+
+case $# in
+    1) ;;
+    *) echo 1>&2 "Usage: $0 \$srcdir/.tarball-version"; exit 1;;
+esac
+
+tarball_version_file=$1
+nl='
+'
+
+# First see if there is a tarball-only version file.
+# then try "git describe", then default.
+if test -f $tarball_version_file
+then
+    v=`cat $tarball_version_file` || exit 1
+    case $v in
+	*$nl*) v= ;; # reject multi-line output
+	[0-9]*) ;;
+	*) v= ;;
+    esac
+    test -z "$v" \
+	&& echo "$0: WARNING: $tarball_version_file seems to be damaged" 1>&2
+fi
+
+if test -n "$v"
+then
+    : # use $v
+elif
+       v=`git describe --abbrev=4 --match='v*' HEAD 2>/dev/null \
+	  || git describe --abbrev=4 HEAD 2>/dev/null` \
+    && case $v in
+	 [0-9]*) ;;
+	 v[0-9]*) ;;
+	 *) (exit 1) ;;
+       esac
+then
+    # Is this a new git that lists number of commits since the last
+    # tag or the previous older version that did not?
+    #   Newer: v6.10-77-g0f8faeb
+    #   Older: v6.10-g0f8faeb
+    case $v in
+	*-*-*) : git describe is okay three part flavor ;;
+	*-*)
+	    : git describe is older two part flavor
+	    # Recreate the number of commits and rewrite such that the
+	    # result is the same as if we were using the newer version
+	    # of git describe.
+	    vtag=`echo "$v" | sed 's/-.*//'`
+	    numcommits=`git rev-list "$vtag"..HEAD | wc -l`
+	    v=`echo "$v" | sed "s/\(.*\)-\(.*\)/\1-$numcommits-\2/"`;
+	    ;;
+    esac
+
+    # Change the first '-' to a '.', so version-comparing tools work properly.
+    # Remove the "g" in git describe's output string, to save a byte.
+    v=`echo "$v" | sed 's/-/./;s/\(.*\)-g/\1-/'`;
+else
+    v=UNKNOWN
+fi
+
+v=`echo "$v" |sed 's/^v//'`
+
+# Don't declare a version "dirty" merely because a time stamp has changed.
+git status > /dev/null 2>&1
+
+dirty=`sh -c 'git diff-index --name-only HEAD' 2>/dev/null` || dirty=
+case "$dirty" in
+    '') ;;
+    *) # Append the suffix only if there isn't one already.
+	case $v in
+	  *-dirty) ;;
+	  *) v="$v-dirty" ;;
+	esac ;;
+esac
+
+# Omit the trailing newline, so that m4_esyscmd can use the result directly.
+echo "$v" | tr -d '\012'
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

host/lib/Makefile.am

@@ -1,7 +1,7 @@
 # This is _NOT_ the library release version, it's an API version.
 # Please read chapter "Library interface versions" of the libtool documentation
 # before making any modifications: https://www.gnu.org/software/libtool/manual/html_node/Versioning.html
-ST2_LIBVERSION=1:0:0
+ST2_LIBVERSION=0:0:0
 
 AM_CPPFLAGS = $(all_includes) -I$(top_srcdir)/include -I$(top_builddir)
 AM_CFLAGS= -Wall $(LIBOSMOCORE_CFLAGS) $(LIBOSMOSIM_CFLAGS) $(LIBUSB_CFLAGS) $(COVERAGE_CFLAGS)

host/lib/simtrace2_api.c

@@ -44,13 +44,9 @@
 #include <osmocom/core/utils.h>
 #include <osmocom/core/socket.h>
 #include <osmocom/core/msgb.h>
-#include <osmocom/core/logging.h>
 #include <osmocom/sim/class_tables.h>
 #include <osmocom/sim/sim.h>
 
-#define LOGSLOT(slot, lvl, fmt, args...) \
-	LOGP(DLINP, lvl, "[%u] " fmt, (slot)->slot_nr, ## args)
-
 /***********************************************************************
  * SIMTRACE core protocol
  ***********************************************************************/
@@ -145,6 +141,7 @@ int osmo_st2_slot_tx_msg(struct osmo_st2_slot *slot, struct msgb *msg,
 	OSMO_ASSERT(transp);
 
 	st_push_hdr(msg, msg_class, msg_type, slot->slot_nr);
+	printf("SIMtrace <- %s\n", msgb_hexdump(msg));
 
 	if (transp->udp_fd < 0) {
 		if (transp->usb_async)
@@ -169,8 +166,6 @@ int osmo_st2_cardem_request_card_insert(struct osmo_st2_cardem_inst *ci, bool in
 	struct msgb *msg = st_msgb_alloc();
 	struct cardemu_usb_msg_cardinsert *cins;
 
-	LOGSLOT(ci->slot, LOGL_NOTICE, "<= %s(inserted=%d)\n", __func__, inserted);
-
 	cins = (struct cardemu_usb_msg_cardinsert *) msgb_put(msg, sizeof(*cins));
 	memset(cins, 0, sizeof(*cins));
 	if (inserted)
@@ -186,7 +181,7 @@ int osmo_st2_cardem_request_pb_and_rx(struct osmo_st2_cardem_inst *ci, uint8_t p
 	struct cardemu_usb_msg_tx_data *txd;
 	txd = (struct cardemu_usb_msg_tx_data *) msgb_put(msg, sizeof(*txd));
 
-	LOGSLOT(ci->slot, LOGL_DEBUG, "<= %s(pb=%02x, le=%u)\n", __func__, pb, le);
+	printf("<= %s(%02x, %d)\n", __func__, pb, le);
 
 	memset(txd, 0, sizeof(*txd));
 	txd->data_len = 1;
@@ -207,7 +202,7 @@ int osmo_st2_cardem_request_pb_and_tx(struct osmo_st2_cardem_inst *ci, uint8_t p
 
 	txd = (struct cardemu_usb_msg_tx_data *) msgb_put(msg, sizeof(*txd));
 
-	LOGSLOT(ci->slot, LOGL_DEBUG, "<= %s(pb=%02x, tx=%s, len=%d)\n", __func__, pb,
+	printf("<= %s(%02x, %s, %d)\n", __func__, pb,
 		osmo_hexdump(data, data_len_in), data_len_in);
 
 	memset(txd, 0, sizeof(*txd));
@@ -231,7 +226,7 @@ int osmo_st2_cardem_request_sw_tx(struct osmo_st2_cardem_inst *ci, const uint8_t
 
 	txd = (struct cardemu_usb_msg_tx_data *) msgb_put(msg, sizeof(*txd));
 
-	LOGSLOT(ci->slot, LOGL_DEBUG, "<= %s(sw=%02x%02x)\n", __func__, sw[0], sw[1]);
+	printf("<= %s(%02x %02x)\n", __func__, sw[0], sw[1]);
 
 	memset(txd, 0, sizeof(*txd));
 	txd->data_len = 2;
@@ -251,7 +246,7 @@ int osmo_st2_cardem_request_set_atr(struct osmo_st2_cardem_inst *ci, const uint8
 
 	satr = (struct cardemu_usb_msg_set_atr *) msgb_put(msg, sizeof(*satr));
 
-	LOGSLOT(ci->slot, LOGL_NOTICE, "<= %s(%s)\n", __func__, osmo_hexdump(atr, atr_len));
+	printf("<= %s(%s)\n", __func__, osmo_hexdump(atr, atr_len));
 
 	memset(satr, 0, sizeof(*satr));
 	satr->atr_len = atr_len;
@@ -268,7 +263,7 @@ int osmo_st2_cardem_request_config(struct osmo_st2_cardem_inst *ci, uint32_t fea
 
 	cfg = (struct cardemu_usb_msg_config *) msgb_put(msg, sizeof(*cfg));
 
-	LOGSLOT(ci->slot, LOGL_NOTICE, "<= %s(features=%08x)\n", __func__, features);
+	printf("<= %s(%08x)\n", __func__, features);
 
 	memset(cfg, 0, sizeof(*cfg));
 	cfg->features = features;
@@ -285,9 +280,6 @@ static int _modem_reset(struct osmo_st2_slot *slot, uint8_t asserted, uint16_t p
 	struct msgb *msg = st_msgb_alloc();
 	struct st_modem_reset *sr ;
 
-	LOGSLOT(slot, LOGL_NOTICE, "<= %s(asserted=%u, pulse_ms=%u)\n", __func__,
-		asserted, pulse_ms);
-
 	sr = (struct st_modem_reset *) msgb_put(msg, sizeof(*sr));
 	sr->asserted = asserted;
 	sr->pulse_duration_msec = pulse_ms;
@@ -318,8 +310,6 @@ static int _modem_sim_select(struct osmo_st2_slot *slot, uint8_t remote_sim)
 	struct msgb *msg = st_msgb_alloc();
 	struct st_modem_sim_select *ss;
 
-	LOGSLOT(slot, LOGL_NOTICE, "<= %s(remote_sim=%u)\n", __func__, remote_sim);
-
 	ss = (struct st_modem_sim_select *) msgb_put(msg, sizeof(*ss));
 	ss->remote_sim = remote_sim;
 

host/lib/usb_util.c

@@ -32,7 +32,5 @@ const struct dev_id osmo_st2_compatible_dev_ids[] = {
 	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_OWHW_SAM3 },
 	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_QMOD_SAM3 },
 	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_SIMTRACE2 },
-	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_OCTSIMTEST },
-	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_NGFF_CARDEM },
 	{ 0, 0 }
 };

host/src/Makefile.am

@@ -5,12 +5,12 @@ AM_LDFLAGS=$(COVERAGE_LDFLAGS)
 LDADD= $(top_builddir)/lib/libosmo-simtrace2.la \
        $(LIBOSMOCORE_LIBS) $(LIBOSMOSIM_LIBS) $(LIBOSMOUSB_LIBS) $(LIBUSB_LIBS)
 
-bin_PROGRAMS = simtrace2-cardem-pcsc simtrace2-list simtrace2-sniff simtrace2-tool
+bin_PROGRAMS = simtrace2-remsim simtrace2-remsim-usb2udp simtrace2-list simtrace2-sniff
 
-simtrace2_cardem_pcsc_SOURCES = simtrace2-cardem-pcsc.c
+simtrace2_remsim_SOURCES = simtrace2-remsim.c
+
+simtrace2_remsim_usb2udp_SOURCES = usb2udp.c
 
 simtrace2_list_SOURCES = simtrace2_usb.c
 
 simtrace2_sniff_SOURCES = simtrace2-sniff.c
-
-simtrace2_tool_SOURCES = simtrace2-tool.c

host/src/simtrace2-remsim.c

@@ -1,7 +1,7 @@
-/* simtrace2-cardem-pcsc - main program for the host PC to provide a remote SIM
+/* simtrace2-remsim - main program for the host PC to provide a remote SIM
  * using the SIMtrace 2 firmware in card emulation mode
  *
- * (C) 2016-2021 by Harald Welte <hwelte@hmw-consulting.de>
+ * (C) 2016-2017 by Harald Welte <hwelte@hmw-consulting.de>
  * (C) 2018, sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
  *
  * This program is free software; you can redistribute it and/or
@@ -47,14 +47,9 @@
 #include <osmocom/core/utils.h>
 #include <osmocom/core/socket.h>
 #include <osmocom/core/msgb.h>
-#include <osmocom/core/select.h>
-#include <osmocom/core/logging.h>
-#include <osmocom/core/application.h>
 #include <osmocom/sim/class_tables.h>
 #include <osmocom/sim/sim.h>
 
-#define LOGCI(ci, lvl, fmt, args ...) printf(fmt, ## args)
-
 static void atr_update_csum(uint8_t *atr, unsigned int atr_len)
 {
 	uint8_t csum = 0;
@@ -66,37 +61,6 @@ static void atr_update_csum(uint8_t *atr, unsigned int atr_len)
 	atr[atr_len-1] = csum;
 }
 
-static void cemu_flags2str(char *out, unsigned int out_len, uint32_t flags)
-{
-	snprintf(out, out_len, "%s%s%s%s%s",
-		 flags & CEMU_STATUS_F_RESET_ACTIVE ? "RESET " : "",
-		 flags & CEMU_STATUS_F_VCC_PRESENT ? "VCC " : "",
-		 flags & CEMU_STATUS_F_CLK_ACTIVE ? "CLK " : "",
-		 flags & CEMU_STATUS_F_CARD_INSERT ? "CARD_PRES " : "",
-		 flags & CEMU_STATUS_F_RCEMU_ACTIVE ? "RCEMU " : "");
-}
-
-static uint32_t last_flags = 0;
-
-static void update_flags(struct osmo_st2_cardem_inst *ci, uint32_t flags)
-{
-	struct osim_card_hdl *card = ci->chan->card;
-
-	if ((flags & CEMU_STATUS_F_VCC_PRESENT) && (flags & CEMU_STATUS_F_CLK_ACTIVE) &&
-	    !(flags & CEMU_STATUS_F_RESET_ACTIVE)) {
-		if (last_flags & CEMU_STATUS_F_RESET_ACTIVE) {
-			/* a reset has just ended, forward it to the real card */
-			bool cold_reset = true;
-			if (last_flags & CEMU_STATUS_F_VCC_PRESENT)
-				cold_reset = false;
-			LOGCI(ci, LOGL_NOTICE, "%s Resetting card in reader...\n",
-				cold_reset ? "Cold" : "Warm");
-			osim_card_reset(card, cold_reset);
-		}
-	}
-	last_flags = flags;
-}
-
 /***********************************************************************
  * Incoming Messages
  ***********************************************************************/
@@ -104,15 +68,12 @@ static void update_flags(struct osmo_st2_cardem_inst *ci, uint32_t flags)
 /*! \brief Process a STATUS message from the SIMtrace2 */
 static int process_do_status(struct osmo_st2_cardem_inst *ci, uint8_t *buf, int len)
 {
-	struct cardemu_usb_msg_status *status = (struct cardemu_usb_msg_status *) buf;
-	char fbuf[80];
+	struct cardemu_usb_msg_status *status;
+	status = (struct cardemu_usb_msg_status *) buf;
 
-	cemu_flags2str(fbuf, sizeof(fbuf), status->flags);
-	printf("=> STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u (%s)\n",
+	printf("=> STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u\n",
 		status->flags, status->fi, status->di, status->wi,
-		status->waiting_time, fbuf);
-
-	update_flags(ci, status->flags);
+		status->waiting_time);
 
 	return 0;
 }
@@ -197,10 +158,6 @@ static int process_usb_msg(struct osmo_st2_cardem_inst *ci, uint8_t *buf, int le
 	case SIMTRACE_MSGT_DO_CEMU_RX_DATA:
 		rc = process_do_rx_da(ci, buf, len);
 		break;
-	case SIMTRACE_MSGT_BD_CEMU_CONFIG:
-		/* firmware confirms configuration change; ignore */
-		rc = 0;
-		break;
 	default:
 		printf("unknown simtrace msg type 0x%02x\n", sh->msg_type);
 		rc = -1;
@@ -210,161 +167,20 @@ static int process_usb_msg(struct osmo_st2_cardem_inst *ci, uint8_t *buf, int le
 	return rc;
 }
 
-/*! \brief Process a STATUS message on IRQ endpoint from the SIMtrace2 */
-static int process_irq_status(struct osmo_st2_cardem_inst *ci, const uint8_t *buf, int len)
-{
-	const struct cardemu_usb_msg_status *status = (struct cardemu_usb_msg_status *) buf;
-	char fbuf[80];
-
-	cemu_flags2str(fbuf, sizeof(fbuf), status->flags);
-	LOGCI(ci, LOGL_INFO, "SIMtrace IRQ STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u (%s)\n",
-		status->flags, status->fi, status->di, status->wi,
-		status->waiting_time, fbuf);
-
-	update_flags(ci, status->flags);
-
-	return 0;
-}
-
-static int process_usb_msg_irq(struct osmo_st2_cardem_inst *ci, const uint8_t *buf, unsigned int len)
-{
-	struct simtrace_msg_hdr *sh = (struct simtrace_msg_hdr *)buf;
-	int rc;
-
-	LOGCI(ci, LOGL_INFO, "SIMtrace IRQ %s\n", osmo_hexdump(buf, len));
-
-	buf += sizeof(*sh);
-
-	switch (sh->msg_type) {
-	case SIMTRACE_MSGT_BD_CEMU_STATUS:
-		rc = process_irq_status(ci, buf, len);
-		break;
-	default:
-		LOGCI(ci, LOGL_ERROR, "unknown simtrace msg type 0x%02x\n", sh->msg_type);
-		rc = -1;
-		break;
-	}
-
-	return rc;
-}
-
-static void usb_in_xfer_cb(struct libusb_transfer *xfer)
-{
-	struct osmo_st2_cardem_inst *ci = xfer->user_data;
-	int rc;
-
-	switch (xfer->status) {
-	case LIBUSB_TRANSFER_COMPLETED:
-		/* hand the message up the stack */
-		process_usb_msg(ci, xfer->buffer, xfer->actual_length);
-		break;
-	case LIBUSB_TRANSFER_NO_DEVICE:
-		LOGCI(ci, LOGL_FATAL, "USB device disappeared\n");
-		exit(1);
-		break;
-	default:
-		LOGCI(ci, LOGL_FATAL, "USB IN transfer failed, status=%u\n", xfer->status);
-		exit(1);
-		break;
-	}
-
-	/* re-submit the IN transfer */
-	rc = libusb_submit_transfer(xfer);
-	OSMO_ASSERT(rc == 0);
-}
-
-
-static void allocate_and_submit_in(struct osmo_st2_cardem_inst *ci)
-{
-	struct osmo_st2_transport *transp = ci->slot->transp;
-	struct libusb_transfer *xfer;
-	int rc;
-
-	xfer = libusb_alloc_transfer(0);
-	OSMO_ASSERT(xfer);
-	xfer->dev_handle = transp->usb_devh;
-	xfer->flags = 0;
-	xfer->type = LIBUSB_TRANSFER_TYPE_BULK;
-	xfer->endpoint = transp->usb_ep.in;
-	xfer->timeout = 0;
-	xfer->user_data = ci;
-	xfer->length = 16*256;
-
-	xfer->buffer = libusb_dev_mem_alloc(xfer->dev_handle, xfer->length);
-	OSMO_ASSERT(xfer->buffer);
-	xfer->callback = usb_in_xfer_cb;
-
-	/* submit the IN transfer */
-	rc = libusb_submit_transfer(xfer);
-	OSMO_ASSERT(rc == 0);
-}
-
-
-static void usb_irq_xfer_cb(struct libusb_transfer *xfer)
-{
-	struct osmo_st2_cardem_inst *ci = xfer->user_data;
-	int rc;
-
-	switch (xfer->status) {
-	case LIBUSB_TRANSFER_COMPLETED:
-		process_usb_msg_irq(ci, xfer->buffer, xfer->actual_length);
-		break;
-	case LIBUSB_TRANSFER_NO_DEVICE:
-		LOGCI(ci, LOGL_FATAL, "USB device disappeared\n");
-		exit(1);
-		break;
-	default:
-		LOGCI(ci, LOGL_FATAL, "USB IN transfer failed, status=%u\n", xfer->status);
-		exit(1);
-		break;
-	}
-
-	/* re-submit the IN transfer */
-	rc = libusb_submit_transfer(xfer);
-	OSMO_ASSERT(rc == 0);
-}
-
-
-static void allocate_and_submit_irq(struct osmo_st2_cardem_inst *ci)
-{
-	struct osmo_st2_transport *transp = ci->slot->transp;
-	struct libusb_transfer *xfer;
-	int rc;
-
-	xfer = libusb_alloc_transfer(0);
-	OSMO_ASSERT(xfer);
-	xfer->dev_handle = transp->usb_devh;
-	xfer->flags = 0;
-	xfer->type = LIBUSB_TRANSFER_TYPE_INTERRUPT;
-	xfer->endpoint = transp->usb_ep.irq_in;
-	xfer->timeout = 0;
-	xfer->user_data = ci;
-	xfer->length = 64;
-
-	xfer->buffer = libusb_dev_mem_alloc(xfer->dev_handle, xfer->length);
-	OSMO_ASSERT(xfer->buffer);
-	xfer->callback = usb_irq_xfer_cb;
-
-	/* submit the IN transfer */
-	rc = libusb_submit_transfer(xfer);
-	OSMO_ASSERT(rc == 0);
-}
-
-
-
 static void print_welcome(void)
 {
-	printf("simtrace2-cardem-pcsc - Using PC/SC reader as SIM\n"
-	       "(C) 2010-2020, Harald Welte <laforge@gnumonks.org>\n"
+	printf("simtrace2-remsim - Remote SIM card forwarding\n"
+	       "(C) 2010-2017, Harald Welte <laforge@gnumonks.org>\n"
 	       "(C) 2018, sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>\n\n");
 }
 
 static void print_help(void)
 {
-	printf( "\t-h\t--help\n"
+	printf( "\t-r\t--remote-udp-host HOST\n"
+		"\t-p\t--remote-udp-port PORT\n"
+		"\t-h\t--help\n"
 		"\t-i\t--gsmtap-ip\tA.B.C.D\n"
 		"\t-a\t--skip-atr\n"
-		"\t-t\t--set-atr\tATR-STRING in HEX\n"
 		"\t-k\t--keep-running\n"
 		"\t-n\t--pcsc-reader-num\n"
 		"\t-V\t--usb-vendor\tVENDOR_ID\n"
@@ -379,9 +195,10 @@ static void print_help(void)
 }
 
 static const struct option opts[] = {
+	{ "remote-udp-host", 1, 0, 'r' },
+	{ "remote-udp-port", 1, 0, 'p' },
 	{ "gsmtap-ip", 1, 0, 'i' },
 	{ "skip-atr", 0, 0, 'a' },
-	{ "set-atr", 1, 0, 't' },
 	{ "help", 0, 0, 'h' },
 	{ "keep-running", 0, 0, 'k' },
 	{ "pcsc-reader-num", 1, 0, 'n' },
@@ -397,9 +214,40 @@ static const struct option opts[] = {
 
 static void run_mainloop(struct osmo_st2_cardem_inst *ci)
 {
+	struct osmo_st2_transport *transp = ci->slot->transp;
+	unsigned int msg_count, byte_count = 0;
+	uint8_t buf[16*265];
+	int xfer_len;
+	int rc;
+
 	printf("Entering main loop\n");
+
 	while (1) {
-		osmo_select_main(0);
+		/* read data from SIMtrace2 device (local or via USB) */
+		if (transp->udp_fd < 0) {
+			rc = libusb_bulk_transfer(transp->usb_devh, transp->usb_ep.in,
+						  buf, sizeof(buf), &xfer_len, 100);
+			if (rc < 0 && rc != LIBUSB_ERROR_TIMEOUT &&
+				      rc != LIBUSB_ERROR_INTERRUPTED &&
+				      rc != LIBUSB_ERROR_IO) {
+				fprintf(stderr, "BULK IN transfer error; rc=%d\n", rc);
+				return;
+			}
+		} else {
+			rc = read(transp->udp_fd, buf, sizeof(buf));
+			if (rc <= 0) {
+				fprintf(stderr, "shor read from UDP\n");
+				return;
+			}
+			xfer_len = rc;
+		}
+		/* dispatch any incoming data */
+		if (xfer_len > 0) {
+			printf("URB: %s\n", osmo_hexdump(buf, xfer_len));
+			process_usb_msg(ci, buf, xfer_len);
+			msg_count++;
+			byte_count += xfer_len;
+		}
 	}
 }
 
@@ -421,7 +269,6 @@ static void signal_handler(int signal)
 	switch (signal) {
 	case SIGINT:
 		osmo_st2_cardem_request_card_insert(ci, false);
-		osmo_st2_modem_sim_select_local(ci->slot);
 		exit(0);
 		break;
 	default:
@@ -429,8 +276,6 @@ static void signal_handler(int signal)
 	}
 }
 
-static struct log_info log_info = {};
-
 int main(int argc, char **argv)
 {
 	struct osmo_st2_transport *transp = ci->slot->transp;
@@ -438,34 +283,31 @@ int main(int argc, char **argv)
 	int rc;
 	int c, ret = 1;
 	int skip_atr = 0;
-	char *atr = NULL;
-	uint8_t override_atr[OSIM_MAX_ATR_LEN];
-	int override_atr_len = 0;
 	int keep_running = 0;
+	int remote_udp_port = 52342;
 	int if_num = 0, vendor_id = -1, product_id = -1;
 	int config_id = -1, altsetting = 0, addr = -1;
 	int reader_num = 0;
+	char *remote_udp_host = NULL;
 	char *path = NULL;
 	struct osim_reader_hdl *reader;
 	struct osim_card_hdl *card;
 
 	print_welcome();
 
-	rc = osmo_libusb_init(NULL);
-	if (rc < 0) {
-		fprintf(stderr, "libusb initialization failed\n");
-		return rc;
-	}
-
-	osmo_init_logging2(NULL, &log_info);
-
 	while (1) {
 		int option_index = 0;
 
-		c = getopt_long(argc, argv, "hi:V:P:C:I:S:A:H:akn:t:", opts, &option_index);
+		c = getopt_long(argc, argv, "r:p:hi:V:P:C:I:S:A:H:akn:", opts, &option_index);
 		if (c == -1)
 			break;
 		switch (c) {
+		case 'r':
+			remote_udp_host = optarg;
+			break;
+		case 'p':
+			remote_udp_port = atoi(optarg);
+			break;
 		case 'h':
 			print_help();
 			exit(0);
@@ -476,9 +318,6 @@ int main(int argc, char **argv)
 		case 'a':
 			skip_atr = 1;
 			break;
-		case 't':
-		        atr = optarg;
-			break;
 		case 'k':
 			keep_running = 1;
 			break;
@@ -509,22 +348,31 @@ int main(int argc, char **argv)
 		}
 	}
 
-	if (atr) {
-		override_atr_len = osmo_hexparse(atr, override_atr, sizeof(override_atr));
-		if (override_atr_len < 2) {
-			fprintf(stderr, "Invalid ATR - please omit a leading 0x and only use valid hex "
-				"digits and whitespace. ATRs need to be between 2 and 33 bytes long.\n");
-			goto do_exit;
-		}
-	}
-
-	if (vendor_id < 0 || product_id < 0) {
+	if (!remote_udp_host && (vendor_id < 0 || product_id < 0)) {
 		fprintf(stderr, "You have to specify the vendor and product ID\n");
 		goto do_exit;
 	}
 
+	transp->udp_fd = -1;
+
 	ci->card_prof = &osim_uicc_sim_cic_profile;
 
+	if (!remote_udp_host) {
+		rc = libusb_init(NULL);
+		if (rc < 0) {
+			fprintf(stderr, "libusb initialization failed\n");
+			goto do_exit;
+		}
+	} else {
+		transp->udp_fd = osmo_sock_init(AF_INET, SOCK_DGRAM, IPPROTO_UDP,
+						remote_udp_host, remote_udp_port+if_num,
+						OSMO_SOCK_F_CONNECT);
+		if (transp->udp_fd < 0) {
+			fprintf(stderr, "error binding UDP port\n");
+			goto do_exit;
+		}
+	}
+
 	rc = osmo_st2_gsmtap_init(gsmtap_host);
 	if (rc < 0) {
 		perror("unable to open GSMTAP");
@@ -552,43 +400,36 @@ int main(int argc, char **argv)
 	signal(SIGINT, &signal_handler);
 
 	do {
-		struct usb_interface_match _ifm, *ifm = &_ifm;
-		ifm->vendor = vendor_id;
-		ifm->product = product_id;
-		ifm->configuration = config_id;
-		ifm->interface = if_num;
-		ifm->altsetting = altsetting;
-		ifm->addr = addr;
-		if (path)
-			osmo_strlcpy(ifm->path, path, sizeof(ifm->path));
-		transp->udp_fd = -1;
-		transp->usb_async = true;
-		transp->usb_devh = osmo_libusb_open_claim_interface(NULL, NULL, ifm);
-		if (!transp->usb_devh) {
-			fprintf(stderr, "can't open USB device\n");
-			goto close;
+		if (transp->udp_fd < 0) {
+			struct usb_interface_match _ifm, *ifm = &_ifm;
+			ifm->vendor = vendor_id;
+			ifm->product = product_id;
+			ifm->configuration = config_id;
+			ifm->interface = if_num;
+			ifm->altsetting = altsetting;
+			ifm->addr = addr;
+			if (path)
+				osmo_strlcpy(ifm->path, path, sizeof(ifm->path));
+			transp->usb_devh = osmo_libusb_open_claim_interface(NULL, NULL, ifm);
+			if (!transp->usb_devh) {
+				fprintf(stderr, "can't open USB device\n");
+				goto close_exit;
+			}
+
+			rc = libusb_claim_interface(transp->usb_devh, if_num);
+			if (rc < 0) {
+				fprintf(stderr, "can't claim interface %d; rc=%d\n", if_num, rc);
+				goto close_exit;
+			}
+
+			rc = osmo_libusb_get_ep_addrs(transp->usb_devh, if_num, &transp->usb_ep.out,
+					      &transp->usb_ep.in, &transp->usb_ep.irq_in);
+			if (rc < 0) {
+				fprintf(stderr, "can't obtain EP addrs; rc=%d\n", rc);
+				goto close_exit;
+			}
 		}
 
-		rc = libusb_claim_interface(transp->usb_devh, if_num);
-		if (rc < 0) {
-			fprintf(stderr, "can't claim interface %d; rc=%d\n", if_num, rc);
-			goto close;
-		}
-
-		rc = osmo_libusb_get_ep_addrs(transp->usb_devh, if_num, &transp->usb_ep.out,
-				      &transp->usb_ep.in, &transp->usb_ep.irq_in);
-		if (rc < 0) {
-			fprintf(stderr, "can't obtain EP addrs; rc=%d\n", rc);
-			goto close;
-		}
-
-		allocate_and_submit_irq(ci);
-		for (int i = 0; i < 4; i++)
-			allocate_and_submit_in(ci);
-
-		/* request firmware to generate STATUS on IRQ endpoint */
-		osmo_st2_cardem_request_config(ci, CEMU_FEAT_F_STATUS_IRQ);
-
 		/* simulate card-insert to modem (owhw, not qmod) */
 		osmo_st2_cardem_request_card_insert(ci, true);
 
@@ -597,14 +438,9 @@ int main(int argc, char **argv)
 
 		if (!skip_atr) {
 			/* set the ATR */
-			if (override_atr_len) {
-				/* user has specified an override-ATR */
-				atr_update_csum(override_atr, override_atr_len);
-				osmo_st2_cardem_request_set_atr(ci, override_atr, override_atr_len);
-			} else {
-				/* use the real ATR of the card */
-				osmo_st2_cardem_request_set_atr(ci, card->atr, card->atr_len);
-			}
+			uint8_t real_atr[] = {  0x3B, 0x00 }; // the simplest ATR
+			atr_update_csum(real_atr, sizeof(real_atr));
+			osmo_st2_cardem_request_set_atr(ci, real_atr, sizeof(real_atr));
 		}
 
 		/* select remote (forwarded) SIM */
@@ -613,22 +449,17 @@ int main(int argc, char **argv)
 		run_mainloop(ci);
 		ret = 0;
 
-		libusb_release_interface(transp->usb_devh, 0);
-
-close:
-		if (transp->usb_devh) {
+		if (transp->udp_fd < 0)
+			libusb_release_interface(transp->usb_devh, 0);
+close_exit:
+		if (transp->usb_devh)
 			libusb_close(transp->usb_devh);
-			transp->usb_devh = NULL;
-		}
 		if (keep_running)
 			sleep(1);
 	} while (keep_running);
 
-close_exit:
-	if (transp->usb_devh)
-		libusb_close(transp->usb_devh);
-
-	osmo_libusb_exit(NULL);
+	if (transp->udp_fd < 0)
+		libusb_exit(NULL);
 do_exit:
 	return ret;
 }

host/src/simtrace2-sniff.c

@@ -315,7 +315,6 @@ static const struct option opts[] = {
 /* Known USB device with SIMtrace firmware supporting sniffer */
 static const struct dev_id compatible_dev_ids[] = {
 	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_SIMTRACE2 },
-	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_NGFF_CARDEM },
 	{ 0, 0 }
 };
 
@@ -343,7 +342,7 @@ int main(int argc, char **argv)
 	while (1) {
 		int option_index = 0;
 
-		int c = getopt_long(argc, argv, "hi:kV:P:C:I:S:A:", opts, &option_index);
+		char c = getopt_long(argc, argv, "hi:kV:P:C:I:S:A:", opts, &option_index);
 		if (c == -1)
 			break;
 		switch (c) {
@@ -379,7 +378,7 @@ int main(int argc, char **argv)
 	}
 
 	/* Scan for available SIMtrace USB devices supporting sniffing */
-	rc = osmo_libusb_init(NULL);
+	rc = libusb_init(NULL);
 	if (rc < 0) {
 		fprintf(stderr, "libusb initialization failed\n");
 		goto do_exit;
@@ -505,7 +504,7 @@ close_exit:
 			sleep(1);
 	} while (keep_running);
 
-	osmo_libusb_exit(NULL);
+	libusb_exit(NULL);
 do_exit:
 	return ret;
 }

host/src/simtrace2-tool.c

@@ -1,337 +0,0 @@
-/* simtrace2-tool - main program for the host PC to provide a remote SIM
- * using the SIMtrace 2 firmware in card emulation mode
- *
- * (C) 2019 by Harald Welte <hwelte@hmw-consulting.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <errno.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdint.h>
-#include <signal.h>
-#define _GNU_SOURCE
-#include <getopt.h>
-
-#include <sys/types.h>
-
-#include <libusb.h>
-
-#include <osmocom/usb/libusb.h>
-#include <osmocom/simtrace2/simtrace2_api.h>
-#include <osmocom/simtrace2/simtrace_prot.h>
-#include <osmocom/simtrace2/gsmtap.h>
-
-#include <osmocom/core/utils.h>
-#include <osmocom/core/msgb.h>
-#include <osmocom/core/logging.h>
-#include <osmocom/core/application.h>
-
-/***********************************************************************
- * Incoming Messages
- ***********************************************************************/
-
-static void print_welcome(void)
-{
-	printf("simtrace2-tool\n"
-	       "(C) 2019 Harald Welte <laforge@gnumonks.org>\n");
-}
-
-static void print_help(void)
-{
-	printf( "simtrace2-tool [OPTIONS] COMMAND\n\n");
-	printf( "Options:\n"
-		"\t-h\t--help\n"
-		"\t-V\t--usb-vendor\tVENDOR_ID\n"
-		"\t-P\t--usb-product\tPRODUCT_ID\n"
-		"\t-C\t--usb-config\tCONFIG_ID\n"
-		"\t-I\t--usb-interface\tINTERFACE_ID\n"
-		"\t-S\t--usb-altsetting ALTSETTING_ID\n"
-		"\t-A\t--usb-address\tADDRESS\n"
-		"\t-H\t--usb-path\tPATH\n"
-		"\n"
-		);
-	printf( "Commands:\n"
-		"\tmodem reset (enable|disable|cycle)\n"
-		"\tmodem sim-switch (local|remote)\n"
-		"\n");
-}
-
-static const struct option opts[] = {
-	{ "help", 0, 0, 'h' },
-	{ "usb-vendor", 1, 0, 'V' },
-	{ "usb-product", 1, 0, 'P' },
-	{ "usb-config", 1, 0, 'C' },
-	{ "usb-interface", 1, 0, 'I' },
-	{ "usb-altsetting", 1, 0, 'S' },
-	{ "usb-address", 1, 0, 'A' },
-	{ "usb-path", 1, 0, 'H' },
-	{ NULL, 0, 0, 0 }
-};
-
-static void run_mainloop(struct osmo_st2_cardem_inst *ci)
-{
-	struct osmo_st2_transport *transp = ci->slot->transp;
-	uint8_t buf[16*265];
-	int xfer_len;
-	int rc;
-
-	while (1) {
-		/* read data from SIMtrace2 device */
-		rc = libusb_bulk_transfer(transp->usb_devh, transp->usb_ep.in,
-					  buf, sizeof(buf), &xfer_len, 100);
-		if (rc < 0 && rc != LIBUSB_ERROR_TIMEOUT &&
-			      rc != LIBUSB_ERROR_INTERRUPTED &&
-			      rc != LIBUSB_ERROR_IO) {
-			fprintf(stderr, "BULK IN transfer error; rc=%d\n", rc);
-			return;
-		}
-		/* break the loop if no new messages arrive within 100ms */
-		if (rc == LIBUSB_ERROR_TIMEOUT)
-			return;
-	}
-}
-
-static struct osmo_st2_transport _transp;
-
-static struct osmo_st2_slot _slot = {
-	.transp = &_transp,
-	.slot_nr = 0,
-};
-
-struct osmo_st2_cardem_inst _ci = {
-	.slot = &_slot,
-};
-
-struct osmo_st2_cardem_inst *ci = &_ci;
-
-/* perform a modem reset */
-static int do_modem_reset(int argc, char **argv)
-{
-	char *command;
-	if (argc < 1)
-		command = "cycle";
-	else {
-		command = argv[0];
-		argc--;
-		argv++;
-	}
-
-	if (!strcmp(command, "enable")) {
-		printf("Activating Modem RESET\n");
-		return osmo_st2_modem_reset_active(ci->slot);
-	} else if (!strcmp(command, "disable")) {
-		printf("Deactivating Modem RESET\n");
-		return osmo_st2_modem_reset_inactive(ci->slot);
-	} else if (!strcmp(command, "cycle")) {
-		printf("Pulsing Modem RESET (1s)\n");
-		return osmo_st2_modem_reset_pulse(ci->slot, 1000);
-	} else {
-		fprintf(stderr, "Unsupported modem reset command: '%s'\n", command);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/* switch between local and remote (emulated) SIM */
-static int do_modem_sim_switch(int argc, char **argv)
-{
-	char *command;
-	if (argc < 1)
-		return -EINVAL;
-	command = argv[0];
-	argc--;
-	argv++;
-
-	if (!strcmp(command, "local")) {
-		printf("Setting SIM=LOCAL; Modem reset recommended\n");
-		return osmo_st2_modem_sim_select_local(ci->slot);
-	} else if (!strcmp(command, "remote")) {
-		printf("Setting SIM=REMOTE; Modem reset recommended\n");
-		return osmo_st2_modem_sim_select_remote(ci->slot);
-	} else {
-		fprintf(stderr, "Unsupported modem sim-switch command: '%s'\n", command);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int do_subsys_modem(int argc, char **argv)
-{
-	char *command;
-	int rc;
-
-	if (argc < 1)
-		return -EINVAL;
-	command = argv[0];
-	argc--;
-	argv++;
-
-	if (!strcmp(command, "reset")) {
-		rc = do_modem_reset(argc, argv);
-	} else if (!strcmp(command, "sim-switch")) {
-		rc = do_modem_sim_switch(argc, argv);
-	} else {
-		fprintf(stderr, "Unsupported command for subsystem modem: '%s'\n", command);
-		return -EINVAL;
-	}
-
-	return rc;
-}
-
-static int do_command(int argc, char **argv)
-{
-	char *subsys;
-	int rc;
-
-	if (argc < 1)
-		return -EINVAL;
-	subsys = argv[0];
-	argc--;
-	argv++;
-
-	if (!strcmp(subsys, "modem"))
-		rc = do_subsys_modem(argc, argv);
-	else {
-		fprintf(stderr, "Unsupported subsystem '%s'\n", subsys);
-		rc = -EINVAL;
-	}
-
-	return rc;
-}
-
-static struct log_info log_info = {};
-
-int main(int argc, char **argv)
-{
-	struct osmo_st2_transport *transp = ci->slot->transp;
-	int rc;
-	int c, ret = 1;
-	int if_num = 0, vendor_id = -1, product_id = -1;
-	int config_id = -1, altsetting = 0, addr = -1;
-	char *path = NULL;
-
-	while (1) {
-		int option_index = 0;
-
-		c = getopt_long(argc, argv, "hV:P:C:I:S:A:H:", opts, &option_index);
-		if (c == -1)
-			break;
-		switch (c) {
-		case 'h':
-			print_help();
-			exit(0);
-			break;
-		case 'V':
-			vendor_id = strtol(optarg, NULL, 16);
-			break;
-		case 'P':
-			product_id = strtol(optarg, NULL, 16);
-			break;
-		case 'C':
-			config_id = atoi(optarg);
-			break;
-		case 'I':
-			if_num = atoi(optarg);
-			break;
-		case 'S':
-			altsetting = atoi(optarg);
-			break;
-		case 'A':
-			addr = atoi(optarg);
-			break;
-		case 'H':
-			path = optarg;
-			break;
-		}
-	}
-
-	if (vendor_id < 0 || product_id < 0) {
-		fprintf(stderr, "You have to specify the vendor and product ID\n");
-		goto do_exit;
-	}
-
-	transp->udp_fd = -1;
-
-	osmo_init_logging2(NULL, &log_info);
-
-	rc = osmo_libusb_init(NULL);
-	if (rc < 0) {
-		fprintf(stderr, "libusb initialization failed\n");
-		goto do_exit;
-	}
-
-	print_welcome();
-
-	do {
-		if (transp->udp_fd < 0) {
-			struct usb_interface_match _ifm, *ifm = &_ifm;
-			ifm->vendor = vendor_id;
-			ifm->product = product_id;
-			ifm->configuration = config_id;
-			ifm->interface = if_num;
-			ifm->altsetting = altsetting;
-			ifm->addr = addr;
-			if (path)
-				osmo_strlcpy(ifm->path, path, sizeof(ifm->path));
-			transp->usb_devh = osmo_libusb_open_claim_interface(NULL, NULL, ifm);
-			if (!transp->usb_devh) {
-				fprintf(stderr, "can't open USB device\n");
-				goto close_exit;
-			}
-
-			rc = osmo_libusb_get_ep_addrs(transp->usb_devh, if_num, &transp->usb_ep.out,
-					      &transp->usb_ep.in, &transp->usb_ep.irq_in);
-			if (rc < 0) {
-				fprintf(stderr, "can't obtain EP addrs; rc=%d\n", rc);
-				goto close_exit;
-			}
-		}
-
-		if (argc - optind <= 0) {
-			fprintf(stderr, "You have to specify a command to execute\n");
-			exit(1);
-		}
-
-		rc = do_command(argc-optind, argv+optind);
-		switch (rc) {
-		case 0:
-			break;
-		case -EINVAL:
-			fprintf(stderr, "Error: Invalid command/syntax\n");
-			exit(1);
-			break;
-		default:
-			fprintf(stderr, "Error executing command: %d\n", rc);
-			exit(1);
-			break;
-		}
-
-		run_mainloop(ci);
-		ret = 0;
-
-		libusb_release_interface(transp->usb_devh, 0);
-close_exit:
-		if (transp->usb_devh)
-			libusb_close(transp->usb_devh);
-	} while (0);
-
-	osmo_libusb_exit(NULL);
-do_exit:
-	return ret;
-}

host/src/simtrace2_usb.c

@@ -25,7 +25,13 @@
 
 #include <osmocom/usb/libusb.h>
 #include <osmocom/simtrace2/simtrace_usb.h>
-#include <osmocom/simtrace2/usb_util.h>
+
+static const struct dev_id compatible_dev_ids[] = {
+	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_OWHW_SAM3 },
+	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_QMOD_SAM3 },
+	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_SIMTRACE2 },
+	{ 0, 0 }
+};
 
 static int find_devices(void)
 {
@@ -33,7 +39,7 @@ static int find_devices(void)
 	int rc, i, num_interfaces;
 
 	/* scan for USB devices matching SIMtrace USB ID with proprietary class */
-	rc = osmo_libusb_find_matching_interfaces(NULL, osmo_st2_compatible_dev_ids,
+	rc = osmo_libusb_find_matching_interfaces(NULL, compatible_dev_ids,
 						  USB_CLASS_PROPRIETARY, -1, -1, ifm, ARRAY_SIZE(ifm));
 	printf("USB matches: %d\n", rc);
 	if (rc < 0)
@@ -77,7 +83,7 @@ static int find_devices(void)
 
 int main(int argc, char **argv)
 {
-	osmo_libusb_init(NULL);
+	libusb_init(NULL);
 	find_devices();
 	return 0;
 }

host/src/usb2udp.c

@@ -0,0 +1,285 @@
+/* simtrace - main program for the host PC
+ *
+ * (C) 2010-2016 by Harald Welte <hwelte@hmw-consulting.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+#include <errno.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdint.h>
+#include <time.h>
+#define _GNU_SOURCE
+#include <getopt.h>
+#include <poll.h>
+
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+
+#include <libusb.h>
+
+#include <osmocom/usb/libusb.h>
+#include <osmocom/simtrace2/simtrace_usb.h>
+#include <osmocom/simtrace2/simtrace_prot.h>
+
+#include <osmocom/core/utils.h>
+#include <osmocom/core/socket.h>
+#include <osmocom/core/select.h>
+
+struct libusb_device_handle *g_devh;
+static struct sockaddr_in g_sa_remote;
+static struct osmo_fd g_udp_ofd;
+
+static void print_welcome(void)
+{
+	printf("usb2udp - UDP/IP forwarding of SIMtrace card emulation\n"
+	       "(C) 2016 by Harald Welte <laforge@gnumonks.org>\n\n");
+}
+
+static void print_help(void)
+{
+	printf( "\t-h\t--help\n"
+		"\t-i\t--interface <0-255>\n"
+		"\n"
+		);
+}
+
+struct ep_buf {
+	uint8_t ep;
+	uint8_t buf[1024];
+	struct libusb_transfer *xfer;
+};
+static struct ep_buf g_buf_in;
+static struct ep_buf g_buf_out;
+
+static void usb_in_xfer_cb(struct libusb_transfer *xfer)
+{
+	int rc;
+
+	printf("xfer_cb(ep=%02x): status=%d, flags=0x%x, type=%u, len=%u, act_len=%u\n",
+		xfer->endpoint, xfer->status, xfer->flags, xfer->type, xfer->length, xfer->actual_length);
+	switch (xfer->status) {
+	case LIBUSB_TRANSFER_COMPLETED:
+		if (xfer->endpoint == g_buf_in.ep) {
+			/* process the data */
+			printf("read %d bytes from SIMTRACE, forwarding to UDP\n", xfer->actual_length);
+			rc = sendto(g_udp_ofd.fd, xfer->buffer, xfer->actual_length, 0, (struct sockaddr *)&g_sa_remote, sizeof(g_sa_remote));
+			if (rc <= 0) {
+				fprintf(stderr, "error writing to UDP\n");
+			}
+			/* and re-submit the URB */
+			libusb_submit_transfer(xfer);
+		} else if (xfer->endpoint == g_buf_out.ep) {
+			/* re-enable reading from the UDP side */
+			g_udp_ofd.when |= BSC_FD_READ;
+		}
+		break;
+	default:
+		fprintf(stderr, "xfer_cb(ERROR '%s')\n", osmo_hexdump_nospc(xfer->buffer, xfer->actual_length));
+		break;
+	}
+}
+
+static void init_ep_buf(struct ep_buf *epb)
+{
+	if (!epb->xfer)
+		epb->xfer = libusb_alloc_transfer(0);
+
+	epb->xfer->flags = 0;
+
+	libusb_fill_bulk_transfer(epb->xfer, g_devh, epb->ep, epb->buf, sizeof(epb->buf), usb_in_xfer_cb, NULL, 0);
+}
+
+/***********************************************************************
+ * libosmocore main loop integration of libusb async I/O
+ ***********************************************************************/
+
+static int g_libusb_pending = 0;
+
+static int ofd_libusb_cb(struct osmo_fd *ofd, unsigned int what)
+{
+	/* FIXME */
+	g_libusb_pending = 1;
+
+	return 0;
+}
+
+/* call-back when libusb adds a FD */
+static void libusb_fd_added_cb(int fd, short events, void *user_data)
+{
+	struct osmo_fd *ofd = talloc_zero(NULL, struct osmo_fd);
+
+	printf("%s(%u, %x)\n", __func__, fd, events);
+
+	ofd->fd = fd;
+	ofd->cb = &ofd_libusb_cb;
+	if (events & POLLIN)
+		ofd->when |= BSC_FD_READ;
+	if (events & POLLOUT)
+		ofd->when |= BSC_FD_WRITE;
+
+	osmo_fd_register(ofd);
+}
+
+/* call-back when libusb removes a FD */
+static void libusb_fd_removed_cb(int fd, void *user_data)
+{
+
+	printf("%s(%u)\n", __func__, fd);
+#if 0
+	struct osmo_fd *ofd;
+	/* FIXME: This needs new export in libosmocore! */
+	ofd = osmo_fd_get_by_fd(fd);
+
+	if (ofd) {
+		osmo_fd_unregister(ofd);
+		talloc_free(ofd);
+	}
+#endif
+}
+
+/* call-back when the UDP socket is readable */
+static int ofd_udp_cb(struct osmo_fd *ofd, unsigned int what)
+{
+	int rc;
+	socklen_t addrlen = sizeof(g_sa_remote);
+
+	rc = recvfrom(ofd->fd, g_buf_out.buf, sizeof(g_buf_out.buf), 0,
+			(struct sockaddr *)&g_sa_remote, &addrlen);
+	if (rc <= 0) {
+		fprintf(stderr, "error reading from UDP\n");
+		return 0;
+	}
+	printf("read %d bytes from UDP, forwarding to SIMTRACE\n", rc);
+	g_buf_out.xfer->length = rc;
+
+	/* disable further READ interest for the UDP socket */
+	ofd->when &= ~BSC_FD_READ;
+
+	/* submit the URB on the OUT end point */
+	libusb_submit_transfer(g_buf_out.xfer);
+
+	return 0;
+}
+
+static void run_mainloop(void)
+{
+	int rc;
+
+	printf("Entering main loop\n");
+
+	while (1) {
+		osmo_select_main(0);
+		if (g_libusb_pending) {
+			struct timeval tv;
+			memset(&tv, 0, sizeof(tv));
+			rc = libusb_handle_events_timeout_completed(NULL, &tv, NULL);
+			if (rc != 0) {
+				fprintf(stderr, "handle_events_timeout_completed == %d\n", rc);
+				break;
+			}
+		}
+	}
+}
+
+int main(int argc, char **argv)
+{
+	int rc;
+	int c, ret = 1;
+	int local_udp_port = 52342;
+	unsigned int if_num = 0;
+
+	print_welcome();
+
+	while (1) {
+		int option_index = 0;
+		static const struct option opts[] = {
+			{ "udp-port", 1, 0, 'u' },
+			{ "interface", 1, 0, 'I' },
+			{ "help", 0, 0, 'h' },
+			{ NULL, 0, 0, 0 }
+		};
+
+		c = getopt_long(argc, argv, "u:I:h", opts, &option_index);
+		if (c == -1)
+			break;
+		switch (c) {
+		case 'u':
+			local_udp_port = atoi(optarg);
+			break;
+		case 'I':
+			if_num = atoi(optarg);
+			break;
+		case 'h':
+			print_help();
+			exit(0);
+			break;
+		}
+	}
+
+	rc = libusb_init(NULL);
+	if (rc < 0) {
+		fprintf(stderr, "libusb initialization failed\n");
+		goto close_exit;
+	}
+
+	libusb_set_pollfd_notifiers(NULL, &libusb_fd_added_cb, &libusb_fd_removed_cb, NULL);
+
+	g_devh = libusb_open_device_with_vid_pid(NULL, USB_VENDOR_OPENMOKO, USB_PRODUCT_OWHW_SAM3);
+	if (!g_devh) {
+		fprintf(stderr, "can't open USB device\n");
+		goto close_exit;
+	}
+
+	rc = libusb_claim_interface(g_devh, if_num);
+	if (rc < 0) {
+		fprintf(stderr, "can't claim interface %u; rc=%d\n", if_num, rc);
+		goto close_exit;
+	}
+
+	/* open UDP socket, register with select handling and mark it
+	 * readable */
+	g_udp_ofd.cb = ofd_udp_cb;
+	osmo_sock_init_ofd(&g_udp_ofd, AF_INET, SOCK_DGRAM, IPPROTO_UDP, NULL, local_udp_port + if_num, OSMO_SOCK_F_BIND);
+
+	rc = osmo_libusb_get_ep_addrs(g_devh, if_num, &g_buf_out.ep, &g_buf_in.ep, NULL);
+	if (rc < 0) {
+		fprintf(stderr, "couldn't find enpdoint addresses; rc=%d\n", rc);
+		goto close_exit;
+	}
+	/* initialize USB buffers / transfers */
+	init_ep_buf(&g_buf_out);
+	init_ep_buf(&g_buf_in);
+
+	/* submit the first transfer for the IN endpoint */
+	libusb_submit_transfer(g_buf_in.xfer);
+
+	run_mainloop();
+
+	ret = 0;
+
+	libusb_release_interface(g_devh, 0);
+close_exit:
+	if (g_devh)
+		libusb_close(g_devh);
+
+	libusb_exit(NULL);
+	return ret;
+}