assert: Use printf_sync() to ensure printing of assert / panic

Change-Id: Icc202e60445d9be1cdcd61176db5ed1704d583e7
card_emu: use edge-triggered VCC ADC logic
2026-03-17 21:58:33 +03:00 · 2021-04-06 02:17:39 +02:00 · 2021-04-06 02:17:39 +02:00 · 2021-04-06 02:17:39 +02:00 · 2021-04-06 02:17:39 +02:00 · 2021-04-06 02:17:39 +02:00
56 changed files with 288 additions and 2543 deletions
--- a/.clang-format
+++ b/.clang-format
@@ -1,563 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# clang-format configuration file. Intended for clang-format >= 4.
-#
-# For more information, see:
-#
-#   Documentation/process/clang-format.rst
-#   https://clang.llvm.org/docs/ClangFormat.html
-#   https://clang.llvm.org/docs/ClangFormatStyleOptions.html
-#
---
-AccessModifierOffset: -4
-AlignAfterOpenBracket: Align
-AlignConsecutiveAssignments: false
-AlignConsecutiveDeclarations: false
-#AlignEscapedNewlines: Left # Unknown to clang-format-4.0
-AlignOperands: true
-AlignTrailingComments: false
-AllowAllParametersOfDeclarationOnNextLine: false
-AllowShortBlocksOnASingleLine: false
-AllowShortCaseLabelsOnASingleLine: false
-AllowShortFunctionsOnASingleLine: None
-AllowShortIfStatementsOnASingleLine: false
-AllowShortLoopsOnASingleLine: false
-AlwaysBreakAfterDefinitionReturnType: None
-AlwaysBreakAfterReturnType: None
-AlwaysBreakBeforeMultilineStrings: false
-AlwaysBreakTemplateDeclarations: false
-BinPackArguments: true
-BinPackParameters: true
-BraceWrapping:
-  AfterClass: false
-  AfterControlStatement: false
-  AfterEnum: false
-  AfterFunction: true
-  AfterNamespace: true
-  AfterObjCDeclaration: false
-  AfterStruct: false
-  AfterUnion: false
-  #AfterExternBlock: false # Unknown to clang-format-5.0
-  BeforeCatch: false
-  BeforeElse: false
-  IndentBraces: false
-  #SplitEmptyFunction: true # Unknown to clang-format-4.0
-  #SplitEmptyRecord: true # Unknown to clang-format-4.0
-  #SplitEmptyNamespace: true # Unknown to clang-format-4.0
-BreakBeforeBinaryOperators: None
-BreakBeforeBraces: Custom
-#BreakBeforeInheritanceComma: false # Unknown to clang-format-4.0
-BreakBeforeTernaryOperators: false
-BreakConstructorInitializersBeforeComma: false
-#BreakConstructorInitializers: BeforeComma # Unknown to clang-format-4.0
-BreakAfterJavaFieldAnnotations: false
-BreakStringLiterals: false
-ColumnLimit: 120
-CommentPragmas: '^ IWYU pragma:'
-#CompactNamespaces: false # Unknown to clang-format-4.0
-ConstructorInitializerAllOnOneLineOrOnePerLine: false
-ConstructorInitializerIndentWidth: 8
-ContinuationIndentWidth: 8
-Cpp11BracedListStyle: false
-DerivePointerAlignment: false
-DisableFormat: false
-ExperimentalAutoDetectBinPacking: false
-#FixNamespaceComments: false # Unknown to clang-format-4.0
-
-# Taken from:
-#   git grep -h '^#define [^[:space:]]*for_each[^[:space:]]*(' include/ \
-#   | sed "s,^#define \([^[:space:]]*for_each[^[:space:]]*\)(.*$,  - '\1'," \
-#   | sort | uniq
-ForEachMacros:
-  - 'apei_estatus_for_each_section'
-  - 'ata_for_each_dev'
-  - 'ata_for_each_link'
-  - '__ata_qc_for_each'
-  - 'ata_qc_for_each'
-  - 'ata_qc_for_each_raw'
-  - 'ata_qc_for_each_with_internal'
-  - 'ax25_for_each'
-  - 'ax25_uid_for_each'
-  - '__bio_for_each_bvec'
-  - 'bio_for_each_bvec'
-  - 'bio_for_each_bvec_all'
-  - 'bio_for_each_integrity_vec'
-  - '__bio_for_each_segment'
-  - 'bio_for_each_segment'
-  - 'bio_for_each_segment_all'
-  - 'bio_list_for_each'
-  - 'bip_for_each_vec'
-  - 'bitmap_for_each_clear_region'
-  - 'bitmap_for_each_set_region'
-  - 'blkg_for_each_descendant_post'
-  - 'blkg_for_each_descendant_pre'
-  - 'blk_queue_for_each_rl'
-  - 'bond_for_each_slave'
-  - 'bond_for_each_slave_rcu'
-  - 'bpf_for_each_spilled_reg'
-  - 'btree_for_each_safe128'
-  - 'btree_for_each_safe32'
-  - 'btree_for_each_safe64'
-  - 'btree_for_each_safel'
-  - 'card_for_each_dev'
-  - 'cgroup_taskset_for_each'
-  - 'cgroup_taskset_for_each_leader'
-  - 'cpufreq_for_each_entry'
-  - 'cpufreq_for_each_entry_idx'
-  - 'cpufreq_for_each_valid_entry'
-  - 'cpufreq_for_each_valid_entry_idx'
-  - 'css_for_each_child'
-  - 'css_for_each_descendant_post'
-  - 'css_for_each_descendant_pre'
-  - 'device_for_each_child_node'
-  - 'displayid_iter_for_each'
-  - 'dma_fence_chain_for_each'
-  - 'do_for_each_ftrace_op'
-  - 'drm_atomic_crtc_for_each_plane'
-  - 'drm_atomic_crtc_state_for_each_plane'
-  - 'drm_atomic_crtc_state_for_each_plane_state'
-  - 'drm_atomic_for_each_plane_damage'
-  - 'drm_client_for_each_connector_iter'
-  - 'drm_client_for_each_modeset'
-  - 'drm_connector_for_each_possible_encoder'
-  - 'drm_for_each_bridge_in_chain'
-  - 'drm_for_each_connector_iter'
-  - 'drm_for_each_crtc'
-  - 'drm_for_each_crtc_reverse'
-  - 'drm_for_each_encoder'
-  - 'drm_for_each_encoder_mask'
-  - 'drm_for_each_fb'
-  - 'drm_for_each_legacy_plane'
-  - 'drm_for_each_plane'
-  - 'drm_for_each_plane_mask'
-  - 'drm_for_each_privobj'
-  - 'drm_mm_for_each_hole'
-  - 'drm_mm_for_each_node'
-  - 'drm_mm_for_each_node_in_range'
-  - 'drm_mm_for_each_node_safe'
-  - 'flow_action_for_each'
-  - 'for_each_acpi_dev_match'
-  - 'for_each_active_dev_scope'
-  - 'for_each_active_drhd_unit'
-  - 'for_each_active_iommu'
-  - 'for_each_aggr_pgid'
-  - 'for_each_available_child_of_node'
-  - 'for_each_bio'
-  - 'for_each_board_func_rsrc'
-  - 'for_each_bvec'
-  - 'for_each_card_auxs'
-  - 'for_each_card_auxs_safe'
-  - 'for_each_card_components'
-  - 'for_each_card_dapms'
-  - 'for_each_card_pre_auxs'
-  - 'for_each_card_prelinks'
-  - 'for_each_card_rtds'
-  - 'for_each_card_rtds_safe'
-  - 'for_each_card_widgets'
-  - 'for_each_card_widgets_safe'
-  - 'for_each_cgroup_storage_type'
-  - 'for_each_child_of_node'
-  - 'for_each_clear_bit'
-  - 'for_each_clear_bit_from'
-  - 'for_each_cmsghdr'
-  - 'for_each_compatible_node'
-  - 'for_each_component_dais'
-  - 'for_each_component_dais_safe'
-  - 'for_each_comp_order'
-  - 'for_each_console'
-  - 'for_each_cpu'
-  - 'for_each_cpu_and'
-  - 'for_each_cpu_not'
-  - 'for_each_cpu_wrap'
-  - 'for_each_dapm_widgets'
-  - 'for_each_dev_addr'
-  - 'for_each_dev_scope'
-  - 'for_each_dma_cap_mask'
-  - 'for_each_dpcm_be'
-  - 'for_each_dpcm_be_rollback'
-  - 'for_each_dpcm_be_safe'
-  - 'for_each_dpcm_fe'
-  - 'for_each_drhd_unit'
-  - 'for_each_dss_dev'
-  - 'for_each_dtpm_table'
-  - 'for_each_efi_memory_desc'
-  - 'for_each_efi_memory_desc_in_map'
-  - 'for_each_element'
-  - 'for_each_element_extid'
-  - 'for_each_element_id'
-  - 'for_each_endpoint_of_node'
-  - 'for_each_evictable_lru'
-  - 'for_each_fib6_node_rt_rcu'
-  - 'for_each_fib6_walker_rt'
-  - 'for_each_free_mem_pfn_range_in_zone'
-  - 'for_each_free_mem_pfn_range_in_zone_from'
-  - 'for_each_free_mem_range'
-  - 'for_each_free_mem_range_reverse'
-  - 'for_each_func_rsrc'
-  - 'for_each_hstate'
-  - 'for_each_if'
-  - 'for_each_iommu'
-  - 'for_each_ip_tunnel_rcu'
-  - 'for_each_irq_nr'
-  - 'for_each_link_codecs'
-  - 'for_each_link_cpus'
-  - 'for_each_link_platforms'
-  - 'for_each_lru'
-  - 'for_each_matching_node'
-  - 'for_each_matching_node_and_match'
-  - 'for_each_member'
-  - 'for_each_memcg_cache_index'
-  - 'for_each_mem_pfn_range'
-  - '__for_each_mem_range'
-  - 'for_each_mem_range'
-  - '__for_each_mem_range_rev'
-  - 'for_each_mem_range_rev'
-  - 'for_each_mem_region'
-  - 'for_each_migratetype_order'
-  - 'for_each_msi_entry'
-  - 'for_each_msi_entry_safe'
-  - 'for_each_msi_vector'
-  - 'for_each_net'
-  - 'for_each_net_continue_reverse'
-  - 'for_each_netdev'
-  - 'for_each_netdev_continue'
-  - 'for_each_netdev_continue_rcu'
-  - 'for_each_netdev_continue_reverse'
-  - 'for_each_netdev_feature'
-  - 'for_each_netdev_in_bond_rcu'
-  - 'for_each_netdev_rcu'
-  - 'for_each_netdev_reverse'
-  - 'for_each_netdev_safe'
-  - 'for_each_net_rcu'
-  - 'for_each_new_connector_in_state'
-  - 'for_each_new_crtc_in_state'
-  - 'for_each_new_mst_mgr_in_state'
-  - 'for_each_new_plane_in_state'
-  - 'for_each_new_private_obj_in_state'
-  - 'for_each_node'
-  - 'for_each_node_by_name'
-  - 'for_each_node_by_type'
-  - 'for_each_node_mask'
-  - 'for_each_node_state'
-  - 'for_each_node_with_cpus'
-  - 'for_each_node_with_property'
-  - 'for_each_nonreserved_multicast_dest_pgid'
-  - 'for_each_of_allnodes'
-  - 'for_each_of_allnodes_from'
-  - 'for_each_of_cpu_node'
-  - 'for_each_of_pci_range'
-  - 'for_each_old_connector_in_state'
-  - 'for_each_old_crtc_in_state'
-  - 'for_each_old_mst_mgr_in_state'
-  - 'for_each_oldnew_connector_in_state'
-  - 'for_each_oldnew_crtc_in_state'
-  - 'for_each_oldnew_mst_mgr_in_state'
-  - 'for_each_oldnew_plane_in_state'
-  - 'for_each_oldnew_plane_in_state_reverse'
-  - 'for_each_oldnew_private_obj_in_state'
-  - 'for_each_old_plane_in_state'
-  - 'for_each_old_private_obj_in_state'
-  - 'for_each_online_cpu'
-  - 'for_each_online_node'
-  - 'for_each_online_pgdat'
-  - 'for_each_pci_bridge'
-  - 'for_each_pci_dev'
-  - 'for_each_pci_msi_entry'
-  - 'for_each_pcm_streams'
-  - 'for_each_physmem_range'
-  - 'for_each_populated_zone'
-  - 'for_each_possible_cpu'
-  - 'for_each_present_cpu'
-  - 'for_each_prime_number'
-  - 'for_each_prime_number_from'
-  - 'for_each_process'
-  - 'for_each_process_thread'
-  - 'for_each_prop_codec_conf'
-  - 'for_each_prop_dai_codec'
-  - 'for_each_prop_dai_cpu'
-  - 'for_each_prop_dlc_codecs'
-  - 'for_each_prop_dlc_cpus'
-  - 'for_each_prop_dlc_platforms'
-  - 'for_each_property_of_node'
-  - 'for_each_registered_fb'
-  - 'for_each_requested_gpio'
-  - 'for_each_requested_gpio_in_range'
-  - 'for_each_reserved_mem_range'
-  - 'for_each_reserved_mem_region'
-  - 'for_each_rtd_codec_dais'
-  - 'for_each_rtd_components'
-  - 'for_each_rtd_cpu_dais'
-  - 'for_each_rtd_dais'
-  - 'for_each_set_bit'
-  - 'for_each_set_bit_from'
-  - 'for_each_set_clump8'
-  - 'for_each_sg'
-  - 'for_each_sg_dma_page'
-  - 'for_each_sg_page'
-  - 'for_each_sgtable_dma_page'
-  - 'for_each_sgtable_dma_sg'
-  - 'for_each_sgtable_page'
-  - 'for_each_sgtable_sg'
-  - 'for_each_sibling_event'
-  - 'for_each_subelement'
-  - 'for_each_subelement_extid'
-  - 'for_each_subelement_id'
-  - '__for_each_thread'
-  - 'for_each_thread'
-  - 'for_each_unicast_dest_pgid'
-  - 'for_each_vsi'
-  - 'for_each_wakeup_source'
-  - 'for_each_zone'
-  - 'for_each_zone_zonelist'
-  - 'for_each_zone_zonelist_nodemask'
-  - 'fwnode_for_each_available_child_node'
-  - 'fwnode_for_each_child_node'
-  - 'fwnode_graph_for_each_endpoint'
-  - 'gadget_for_each_ep'
-  - 'genradix_for_each'
-  - 'genradix_for_each_from'
-  - 'hash_for_each'
-  - 'hash_for_each_possible'
-  - 'hash_for_each_possible_rcu'
-  - 'hash_for_each_possible_rcu_notrace'
-  - 'hash_for_each_possible_safe'
-  - 'hash_for_each_rcu'
-  - 'hash_for_each_safe'
-  - 'hctx_for_each_ctx'
-  - 'hlist_bl_for_each_entry'
-  - 'hlist_bl_for_each_entry_rcu'
-  - 'hlist_bl_for_each_entry_safe'
-  - 'hlist_for_each'
-  - 'hlist_for_each_entry'
-  - 'hlist_for_each_entry_continue'
-  - 'hlist_for_each_entry_continue_rcu'
-  - 'hlist_for_each_entry_continue_rcu_bh'
-  - 'hlist_for_each_entry_from'
-  - 'hlist_for_each_entry_from_rcu'
-  - 'hlist_for_each_entry_rcu'
-  - 'hlist_for_each_entry_rcu_bh'
-  - 'hlist_for_each_entry_rcu_notrace'
-  - 'hlist_for_each_entry_safe'
-  - 'hlist_for_each_entry_srcu'
-  - '__hlist_for_each_rcu'
-  - 'hlist_for_each_safe'
-  - 'hlist_nulls_for_each_entry'
-  - 'hlist_nulls_for_each_entry_from'
-  - 'hlist_nulls_for_each_entry_rcu'
-  - 'hlist_nulls_for_each_entry_safe'
-  - 'i3c_bus_for_each_i2cdev'
-  - 'i3c_bus_for_each_i3cdev'
-  - 'ide_host_for_each_port'
-  - 'ide_port_for_each_dev'
-  - 'ide_port_for_each_present_dev'
-  - 'idr_for_each_entry'
-  - 'idr_for_each_entry_continue'
-  - 'idr_for_each_entry_continue_ul'
-  - 'idr_for_each_entry_ul'
-  - 'in_dev_for_each_ifa_rcu'
-  - 'in_dev_for_each_ifa_rtnl'
-  - 'inet_bind_bucket_for_each'
-  - 'inet_lhash2_for_each_icsk_rcu'
-  - 'key_for_each'
-  - 'key_for_each_safe'
-  - 'klp_for_each_func'
-  - 'klp_for_each_func_safe'
-  - 'klp_for_each_func_static'
-  - 'klp_for_each_object'
-  - 'klp_for_each_object_safe'
-  - 'klp_for_each_object_static'
-  - 'kunit_suite_for_each_test_case'
-  - 'kvm_for_each_memslot'
-  - 'kvm_for_each_vcpu'
-  - 'list_for_each'
-  - 'list_for_each_codec'
-  - 'list_for_each_codec_safe'
-  - 'list_for_each_continue'
-  - 'list_for_each_entry'
-  - 'list_for_each_entry_continue'
-  - 'list_for_each_entry_continue_rcu'
-  - 'list_for_each_entry_continue_reverse'
-  - 'list_for_each_entry_from'
-  - 'list_for_each_entry_from_rcu'
-  - 'list_for_each_entry_from_reverse'
-  - 'list_for_each_entry_lockless'
-  - 'list_for_each_entry_rcu'
-  - 'list_for_each_entry_reverse'
-  - 'list_for_each_entry_safe'
-  - 'list_for_each_entry_safe_continue'
-  - 'list_for_each_entry_safe_from'
-  - 'list_for_each_entry_safe_reverse'
-  - 'list_for_each_entry_srcu'
-  - 'list_for_each_prev'
-  - 'list_for_each_prev_safe'
-  - 'list_for_each_safe'
-  - 'llist_for_each'
-  - 'llist_for_each_entry'
-  - 'llist_for_each_entry_safe'
-  - 'llist_for_each_safe'
-  - 'mci_for_each_dimm'
-  - 'media_device_for_each_entity'
-  - 'media_device_for_each_intf'
-  - 'media_device_for_each_link'
-  - 'media_device_for_each_pad'
-  - 'nanddev_io_for_each_page'
-  - 'netdev_for_each_lower_dev'
-  - 'netdev_for_each_lower_private'
-  - 'netdev_for_each_lower_private_rcu'
-  - 'netdev_for_each_mc_addr'
-  - 'netdev_for_each_uc_addr'
-  - 'netdev_for_each_upper_dev_rcu'
-  - 'netdev_hw_addr_list_for_each'
-  - 'nft_rule_for_each_expr'
-  - 'nla_for_each_attr'
-  - 'nla_for_each_nested'
-  - 'nlmsg_for_each_attr'
-  - 'nlmsg_for_each_msg'
-  - 'nr_neigh_for_each'
-  - 'nr_neigh_for_each_safe'
-  - 'nr_node_for_each'
-  - 'nr_node_for_each_safe'
-  - 'of_for_each_phandle'
-  - 'of_property_for_each_string'
-  - 'of_property_for_each_u32'
-  - 'pci_bus_for_each_resource'
-  - 'pcl_for_each_chunk'
-  - 'pcl_for_each_segment'
-  - 'pcm_for_each_format'
-  - 'ping_portaddr_for_each_entry'
-  - 'plist_for_each'
-  - 'plist_for_each_continue'
-  - 'plist_for_each_entry'
-  - 'plist_for_each_entry_continue'
-  - 'plist_for_each_entry_safe'
-  - 'plist_for_each_safe'
-  - 'pnp_for_each_card'
-  - 'pnp_for_each_dev'
-  - 'protocol_for_each_card'
-  - 'protocol_for_each_dev'
-  - 'queue_for_each_hw_ctx'
-  - 'radix_tree_for_each_slot'
-  - 'radix_tree_for_each_tagged'
-  - 'rb_for_each'
-  - 'rbtree_postorder_for_each_entry_safe'
-  - 'rdma_for_each_block'
-  - 'rdma_for_each_port'
-  - 'rdma_umem_for_each_dma_block'
-  - 'resource_list_for_each_entry'
-  - 'resource_list_for_each_entry_safe'
-  - 'rhl_for_each_entry_rcu'
-  - 'rhl_for_each_rcu'
-  - 'rht_for_each'
-  - 'rht_for_each_entry'
-  - 'rht_for_each_entry_from'
-  - 'rht_for_each_entry_rcu'
-  - 'rht_for_each_entry_rcu_from'
-  - 'rht_for_each_entry_safe'
-  - 'rht_for_each_from'
-  - 'rht_for_each_rcu'
-  - 'rht_for_each_rcu_from'
-  - '__rq_for_each_bio'
-  - 'rq_for_each_bvec'
-  - 'rq_for_each_segment'
-  - 'scsi_for_each_prot_sg'
-  - 'scsi_for_each_sg'
-  - 'sctp_for_each_hentry'
-  - 'sctp_skb_for_each'
-  - 'shdma_for_each_chan'
-  - '__shost_for_each_device'
-  - 'shost_for_each_device'
-  - 'sk_for_each'
-  - 'sk_for_each_bound'
-  - 'sk_for_each_entry_offset_rcu'
-  - 'sk_for_each_from'
-  - 'sk_for_each_rcu'
-  - 'sk_for_each_safe'
-  - 'sk_nulls_for_each'
-  - 'sk_nulls_for_each_from'
-  - 'sk_nulls_for_each_rcu'
-  - 'snd_array_for_each'
-  - 'snd_pcm_group_for_each_entry'
-  - 'snd_soc_dapm_widget_for_each_path'
-  - 'snd_soc_dapm_widget_for_each_path_safe'
-  - 'snd_soc_dapm_widget_for_each_sink_path'
-  - 'snd_soc_dapm_widget_for_each_source_path'
-  - 'tb_property_for_each'
-  - 'tcf_exts_for_each_action'
-  - 'udp_portaddr_for_each_entry'
-  - 'udp_portaddr_for_each_entry_rcu'
-  - 'usb_hub_for_each_child'
-  - 'v4l2_device_for_each_subdev'
-  - 'v4l2_m2m_for_each_dst_buf'
-  - 'v4l2_m2m_for_each_dst_buf_safe'
-  - 'v4l2_m2m_for_each_src_buf'
-  - 'v4l2_m2m_for_each_src_buf_safe'
-  - 'virtio_device_for_each_vq'
-  - 'while_for_each_ftrace_op'
-  - 'xa_for_each'
-  - 'xa_for_each_marked'
-  - 'xa_for_each_range'
-  - 'xa_for_each_start'
-  - 'xas_for_each'
-  - 'xas_for_each_conflict'
-  - 'xas_for_each_marked'
-  - 'xbc_array_for_each_value'
-  - 'xbc_for_each_key_value'
-  - 'xbc_node_for_each_array_value'
-  - 'xbc_node_for_each_child'
-  - 'xbc_node_for_each_key_value'
-  - 'zorro_for_each_dev'
-  - 'for_each_line'
-  - 'for_each_non_empty_line'
-
-#IncludeBlocks: Preserve # Unknown to clang-format-5.0
-IncludeCategories:
-  - Regex: '.*'
-    Priority: 1
-IncludeIsMainRegex: '(Test)?$'
-IndentCaseLabels: false
-#IndentPPDirectives: None # Unknown to clang-format-5.0
-IndentWidth: 8
-IndentWrappedFunctionNames: false
-JavaScriptQuotes: Leave
-JavaScriptWrapImports: true
-KeepEmptyLinesAtTheStartOfBlocks: false
-MacroBlockBegin: ''
-MacroBlockEnd: ''
-MaxEmptyLinesToKeep: 1
-NamespaceIndentation: None
-#ObjCBinPackProtocolList: Auto # Unknown to clang-format-5.0
-ObjCBlockIndentWidth: 8
-ObjCSpaceAfterProperty: true
-ObjCSpaceBeforeProtocolList: true
-
-# Taken from git's rules
-#PenaltyBreakAssignment: 10 # Unknown to clang-format-4.0
-PenaltyBreakBeforeFirstCallParameter: 30
-PenaltyBreakComment: 10
-PenaltyBreakFirstLessLess: 0
-PenaltyBreakString: 10
-PenaltyExcessCharacter: 100
-PenaltyReturnTypeOnItsOwnLine: 60
-
-PointerAlignment: Right
-ReflowComments: false
-SortIncludes: false
-#SortUsingDeclarations: false # Unknown to clang-format-4.0
-SpaceAfterCStyleCast: false
-SpaceAfterTemplateKeyword: true
-SpaceBeforeAssignmentOperators: true
-#SpaceBeforeCtorInitializerColon: true # Unknown to clang-format-5.0
-#SpaceBeforeInheritanceColon: true # Unknown to clang-format-5.0
-SpaceBeforeParens: ControlStatements
-#SpaceBeforeRangeBasedForLoopColon: true # Unknown to clang-format-5.0
-SpaceInEmptyParentheses: false
-SpacesBeforeTrailingComments: 1
-SpacesInAngles: false
-SpacesInContainerLiterals: false
-SpacesInCStyleCastParentheses: false
-SpacesInParentheses: false
-SpacesInSquareBrackets: false
-Standard: Cpp03
-TabWidth: 8
-UseTab: Always
-...
--- a/.gitreview
+++ b/.gitreview
@@ -1,3 +0,0 @@
-[gerrit]
-host=gerrit.osmocom.org
-project=simtrace2
--- a/14
+++ b/14
@@ -8,23 +8,13 @@ fw-$(1)-$(2)-clean:
 endef

 $(eval $(call RULES,simtrace,dfu))
-$(eval $(call RULES,simtrace,blupdate))
 $(eval $(call RULES,simtrace,trace))
 $(eval $(call RULES,simtrace,cardem))
 $(eval $(call RULES,qmod,dfu))
-$(eval $(call RULES,qmod,blupdate))
 $(eval $(call RULES,qmod,cardem))
-$(eval $(call RULES,ngff_cardem,dfu))
-$(eval $(call RULES,ngff_cardem,blupdate))
-$(eval $(call RULES,ngff_cardem,trace))
-$(eval $(call RULES,ngff_cardem,cardem))

-fw-clean: fw-simtrace-dfu-clean fw-simtrace-blupdate-clean fw-simtrace-trace-clean fw-simtrace-cardem-clean \
-	fw-qmod-dfu-clean fw-qmod-blupdate-clean fw-qmod-cardem-clean \
-	fw-ngff_cardem-dfu-clean fw-ngff_cardem-blupdate-clean fw-ngff_cardem-trace-clean fw-ngff_cardem-cardem-clean
-fw: fw-simtrace-dfu fw-simtrace-blupdate fw-simtrace-trace fw-simtrace-cardem \
-	fw-qmod-dfu fw-qmod-blupdate fw-qmod-cardem \
-	fw-ngff_cardem-dfu fw-ngff_cardem-blupdate fw-ngff_cardem-trace fw-ngff_cardem-cardem
+fw-clean: fw-simtrace-dfu-clean fw-simtrace-trace-clean fw-simtrace-cardem-clean fw-qmod-dfu-clean fw-qmod-cardem-clean
+fw: fw-simtrace-dfu fw-simtrace-trace fw-simtrace-cardem fw-qmod-dfu fw-qmod-cardem

 utils:
 	(cd host && \
--- a/contrib/flash.py
+++ b/contrib/flash.py
@@ -27,9 +27,7 @@ class Device(NamedTuple):
 DEVICE_SIMTRACE = Device(usb_vendor_id=0x1d50, usb_product_id=0x60e3, name="SIMtrace 2", url={"trace": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/simtrace-trace-dfu-latest.bin", "cardem": "https://osmocom.org/attachments/download/3868/simtrace-cardem-dfu.bin"})
 DEVICE_QMOD = Device(usb_vendor_id=0x1d50, usb_product_id=0x4004, name="sysmoQMOD (Quad Modem)", url={"cardem": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/qmod-cardem-dfu-latest.bin"})
 DEVICE_OWHW = Device(usb_vendor_id=0x1d50, usb_product_id=0x4001, name="OWHW", url={"cardem": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/owhw-cardem-dfu-latest.bin"})
-DEVICE_OCTSIMTEST = Device(usb_vendor_id=0x1d50, usb_product_id=0x616d, name="OCTSIMTEST", url={"cardem": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/octsimtest-cardem-dfu-latest.bin"})
-DEVICE_NGFF_CARDEM = Device(usb_vendor_id=0x1d50, usb_product_id=0x616e, name="ngff-cardem", url={"cardem": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/ngff_cardem-cardem-dfu-latest.bin"})
-DEVICES = [DEVICE_SIMTRACE, DEVICE_QMOD, DEVICE_OCTSIMTEST, DEVICE_NGFF_CARDEM]
+DEVICES = [DEVICE_SIMTRACE, DEVICE_QMOD]

 # which firmware does the SIMtrace USN interface subclass correspond
 FIRMWARE_SUBCLASS = {1: "trace", 2: "cardem"}
--- a/contrib/jenkins.sh
+++ b/contrib/jenkins.sh
@@ -28,11 +28,9 @@ export PKG_CONFIG_PATH="$inst/lib/pkgconfig:$PKG_CONFIG_PATH"
 export LD_LIBRARY_PATH="$inst/lib"

 BUILDS=""
-BUILDS+="simtrace/dfu simtrace/blupdate simtrace/trace simtrace/cardem "
-BUILDS+="qmod/dfu qmod/blupdate qmod/cardem "
-BUILDS+="owhw/dfu owhw/blupdate owhw/cardem "
-BUILDS+="octsimtest/cardem "
-BUILDS+="ngff_cardem/dfu ngff_cardem/blupdate ngff_cardem/cardem ngff_cardem/trace "
+BUILDS+="simtrace/dfu simtrace/trace "
+BUILDS+="qmod/dfu qmod/cardem "
+BUILDS+="owhw/dfu owhw/cardem "

 cd $TOPDIR/firmware
 for build in $BUILDS; do
@@ -65,19 +63,21 @@ make dist
 #	make -C "$base/doc/manuals" publish
 #fi

+rm -rf $TOPDIR/firmware/bin/simtrace-cardem*
+
 if [ "x$publish" = "x--publish" ]; then
 	echo
 	echo "=============== UPLOAD BUILD  =============="
 	$TOPDIR/contrib/prepare_upload.sh

 	cat > "/build/known_hosts" <<EOF
-[ftp.osmocom.org]:48 ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDDgQ9HntlpWNmh953a2Gc8NysKE4orOatVT1wQkyzhARnfYUerRuwyNr1GqMyBKdSI9amYVBXJIOUFcpV81niA7zQRUs66bpIMkE9/rHxBd81SkorEPOIS84W4vm3SZtuNqa+fADcqe88Hcb0ZdTzjKILuwi19gzrQyME2knHY71EOETe9Yow5RD2hTIpB5ecNxI0LUKDq+Ii8HfBvndPBIr0BWYDugckQ3Bocf+yn/tn2/GZieFEyFpBGF/MnLbAAfUKIdeyFRX7ufaiWWz5yKAfEhtziqdAGZaXNaLG6gkpy3EixOAy6ZXuTAk3b3Y0FUmDjhOHllbPmTOcKMry9
-[ftp.osmocom.org]:48 ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBPdWn1kEousXuKsZ+qJEZTt/NSeASxCrUfNDW3LWtH+d8Ust7ZuKp/vuyG+5pe5pwpPOgFu7TjN+0lVjYJVXH54=
-[ftp.osmocom.org]:48 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIK8iivY70EiR5NiGChV39gRLjNpC8lvu1ZdHtdMw2zuX
+[rita.osmocom.org]:48 ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDDgQ9HntlpWNmh953a2Gc8NysKE4orOatVT1wQkyzhARnfYUerRuwyNr1GqMyBKdSI9amYVBXJIOUFcpV81niA7zQRUs66bpIMkE9/rHxBd81SkorEPOIS84W4vm3SZtuNqa+fADcqe88Hcb0ZdTzjKILuwi19gzrQyME2knHY71EOETe9Yow5RD2hTIpB5ecNxI0LUKDq+Ii8HfBvndPBIr0BWYDugckQ3Bocf+yn/tn2/GZieFEyFpBGF/MnLbAAfUKIdeyFRX7ufaiWWz5yKAfEhtziqdAGZaXNaLG6gkpy3EixOAy6ZXuTAk3b3Y0FUmDjhOHllbPmTOcKMry9
+[rita.osmocom.org]:48 ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBPdWn1kEousXuKsZ+qJEZTt/NSeASxCrUfNDW3LWtH+d8Ust7ZuKp/vuyG+5pe5pwpPOgFu7TjN+0lVjYJVXH54=
+[rita.osmocom.org]:48 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIK8iivY70EiR5NiGChV39gRLjNpC8lvu1ZdHtdMw2zuX
 EOF
 	SSH_COMMAND="ssh -o 'UserKnownHostsFile=/build/known_hosts' -p 48"
-	rsync --archive --verbose --compress --delete --rsh "$SSH_COMMAND" $TOPDIR/firmware/bin/*-latest.{bin,elf} binaries@ftp.osmocom.org:web-files/simtrace2/firmware/latest/
-	rsync --archive --verbose --compress --rsh "$SSH_COMMAND" --exclude $TOPDIR/firmware/bin/*-latest.{bin,elf} $TOPDIR/firmware/bin/*-*-*-*.{bin,elf} binaries@ftp.osmocom.org:web-files/simtrace2/firmware/all/
+	rsync --archive --verbose --compress --delete --rsh "$SSH_COMMAND" $TOPDIR/firmware/bin/*-latest.{bin,elf} binaries@rita.osmocom.org:web-files/simtrace2/firmware/latest/
+	rsync --archive --verbose --compress --rsh "$SSH_COMMAND" --exclude $TOPDIR/firmware/bin/*-latest.{bin,elf} $TOPDIR/firmware/bin/*-*-*-*.{bin,elf} binaries@rita.osmocom.org:web-files/simtrace2/firmware/all/
 fi

 echo
--- a/contrib/simtrace.lua
+++ b/contrib/simtrace.lua
@@ -1,92 +0,0 @@
-usb_simtrace_protocol = Proto("USB_simtrace",  "USB simtrace protocol")
-
-
-local control_commands = {
-- /* SIMTRACE_MSGC_GENERIC */
-[0x0000] = "SIMTRACE_CMD_DO_ERROR",
-[0x0001] = "SIMTRACE_CMD_BD_BOARD_INFO",
-
-- /* SIMTRACE_MSGC_CARDEM */
-[0x0101] = "SIMTRACE_MSGT_DT_CEMU_TX_DATA",
-[0x0102] = "SIMTRACE_MSGT_DT_CEMU_SET_ATR",
-[0x0103] = "SIMTRACE_MSGT_BD_CEMU_STATS",
-[0x0104] = "SIMTRACE_MSGT_BD_CEMU_STATUS",
-[0x0105] = "SIMTRACE_MSGT_DT_CEMU_CARDINSERT",
-[0x0106] = "SIMTRACE_MSGT_DO_CEMU_RX_DATA",
-[0x0107] = "SIMTRACE_MSGT_DO_CEMU_PTS",
-[0x0108] = "SIMTRACE_MSGT_BD_CEMU_CONFIG",
-
-- /* SIMTRACE_MSGC_MODEM */
-[0x0201] = "SIMTRACE_MSGT_DT_MODEM_RESET",
-[0x0202] = "SIMTRACE_MSGT_DT_MODEM_SIM_SELECT",
-[0x0203] = "SIMTRACE_MSGT_BD_MODEM_STATUS",
-
-- /* SIMTRACE_MSGC_SNIFF */
-[0x0300] = "SIMTRACE_MSGT_SNIFF_CHANGE",
-[0x0301] = "SIMTRACE_MSGT_SNIFF_FIDI",
-[0x0302] = "SIMTRACE_MSGT_SNIFF_ATR",
-[0x0304] = "SIMTRACE_MSGT_SNIFF_TPDU",
-[0x0303] = "SIMTRACE_MSGT_SNIFF_PPS"
-}
-
-local msgtype  = ProtoField.uint16("usb_simtrace.msgtype", "Message Type", base.HEX_DEC, control_commands)
-local seqnr  = ProtoField.uint8("usb_simtrace.seqnr", "Sequence Number", base.HEX_DEC)
-local slotnr  = ProtoField.uint8("usb_simtrace.slotnr", "Slot Number", base.HEX_DEC)
-local reserved  = ProtoField.uint16("usb_simtrace.reserved", "reserved", base.HEX_DEC)
-local payloadlen  = ProtoField.uint16("usb_simtrace.length", "length", base.HEX_DEC)
-local payload  = ProtoField.bytes("usb_simtrace.payload", "Data")
-
-local pb_and_rx  = ProtoField.uint32("usb_simtrace.pb_and_rx", "pb_and_rx", base.HEX_DEC, NULL, 0x8)
-local pb_and_tx  = ProtoField.uint32("usb_simtrace.pb_and_tx", "pb_and_tx", base.HEX_DEC, NULL, 0x4)
-local final  = ProtoField.uint32("usb_simtrace.final", "final", base.HEX_DEC, NULL, 0x2)
-local tpdu_hdr  = ProtoField.uint32("usb_simtrace.tpdu_hdr", "tpdu_hdr", base.HEX_DEC, NULL, 0x1)
-local rxtxdatalen  = ProtoField.uint16("usb_simtrace.rxtxdatalen", "rx/tx data length", base.HEX_DEC)
-local rxtxdata  = ProtoField.bytes("usb_simtrace.rxtxdata", "rx/tx (data)")
-usb_simtrace_protocol.fields = {
-  msgtype, seqnr, slotnr, reserved, payloadlen, payload, pb_and_rx, pb_and_tx, final, tpdu_hdr, rxtxdatalen, rxtxdata
-}
-function dissect_rxtx(payload_data,pinfo,tree)
-
-  local headerSubtree = tree:add(usb_simtrace_protocol, payload_data, "rx/tx data")
-  local len  = payload_data(8+4,2):le_uint();
-  local cmd32 =  payload_data(8+0,4):le_uint();
-
-  headerSubtree:add(pb_and_rx, cmd32)
-  headerSubtree:add(pb_and_tx, cmd32)
-  headerSubtree:add(final, cmd32)
-  headerSubtree:add(tpdu_hdr, cmd32)
-
-  headerSubtree:add(rxtxdatalen, len)
-  headerSubtree:add_le(rxtxdata, payload_data(8+6,len))
-end
-
-function usb_simtrace_protocol.dissector(buffer, pinfo, tree)
-  length = buffer:len()
-  if length == 0 then return end
-
-  pinfo.cols.protocol = usb_simtrace_protocol.name
-
-  local subtree = tree:add(usb_simtrace_protocol, buffer(), "USB simtrace Data")
-  local command = buffer(0,2):uint()
-
-  subtree:add(msgtype, command):set_generated()
-  subtree:add(seqnr, buffer(2,1))
-  subtree:add(slotnr, buffer(3,1))
-  subtree:add_le(payloadlen, buffer(6,2))
-  pinfo.cols.info = string.format("Cmd 0x%04X : %s", command, control_commands[command])
-  local payload_data = buffer(8,length-8)
-  if(command == 0x0101 or command == 0x0106) then
-    return dissect_rxtx(buffer(),pinfo,subtree)
-  else
-    subtree:add(payload, payload_data)
-  end
-
-end
-
-
-function usb_simtrace_protocol.init()
-local usb_product_dissectors = DissectorTable.get("usb.product")
-usb_product_dissectors:add(0x1d50616d, usb_simtrace_protocol)
-usb_product_dissectors:add(0x1d50616e, usb_simtrace_protocol)
-DissectorTable.get("usb.bulk"):add(0xffff, usb_simtrace_protocol)
-end
--- a/debian/control
+++ b/debian/control
@@ -12,17 +12,29 @@ Build-Depends: debhelper (>= 9),
               dh-autoreconf,
               libosmocore-dev,
               libpcsclite-dev,
-               libusb-1.0-0-dev
+               libnewlib-arm-none-eabi,
+               libusb-1.0-0-dev,
+               gcc-arm-none-eabi
 Standards-Version: 3.9.8
 Vcs-Git: git://git.osmocom.org/simtrace2.git
 Vcs-Browser: http://git.osmocom.org/simtrace2/
 Homepage: http://osmocom.org/projects/simtrace2/wiki

+Package: simtrace2-firmware
+Section: devel
+Architecture: all
+Recommends: dfu-util
+Description: Firmware for SAM3 based SIMtrace2 USB Devices.
+ Open Source firmware for the Cortex-M3 microcontroller in the
+ "Osmocom SIMtrace2" USB-attached peripheral device.  Will only work in
+ SAM3S-based SIMtrace2, not in its SAM7S-based predecessor SIMtrace!
+
 Package: simtrace2-utils
 Section: devel
 Architecture: any
 Multi-Arch: same
 Depends: ${shlibs:Depends}, ${misc:Depends}, libosmo-simtrace2-0
+Recommends: simtrace2-firmware
 Description: Host utilities to communicate with SIMtrace2 USB Devices.

 Package: libosmo-simtrace2-0
--- a/debian/rules
+++ b/debian/rules
@@ -17,9 +17,3 @@ export DEB_LDFLAGS_MAINT_STRIP = -Wl,-Bsymbolic-functions

 override_dh_autoreconf:
 	cd host && dh_autoreconf
-
-override_dh_auto_build:
-	dh_auto_build -- utils
-
-override_dh_auto_install:
-	dh_auto_build -- -C host
--- a/debian/simtrace2-firmware.install
+++ b/debian/simtrace2-firmware.install
@@ -0,0 +1 @@
+usr/share/simtrace2/*.bin
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -50,7 +50,6 @@ APP ?= dfu
 # Defines which are the available memory targets for the SAM3S-EK board.
 ifeq ($(APP), dfu)
 MEMORIES ?= flash dfu
-TRACE_LEVEL ?= 0
 else
 MEMORIES ?= dfu
 endif
@@ -73,20 +72,12 @@ AT91LIB_USB_DFU_PATH = $(AT91LIB)/usb/device/dfu
 # Tool suffix when cross-compiling
 CROSS_COMPILE = arm-none-eabi-

-USE_CLANG ?= 0
-ifneq ("$(USE_CLANG)","0")
-# --target=thumbv7m-none-eabi
-CC = clang
-LD = ld.lld
-SIZE = llvm-size
-LIBS = -nostdlib
-else
+LIBS = -Wl,--start-group -lgcc -Wl,--end-group -nostdlib
+
+# Compilation tools
 CC = $(CROSS_COMPILE)gcc
 LD = $(CROSS_COMPILE)ld
 SIZE = $(CROSS_COMPILE)size
-LIBS = -Wl,--start-group -lgcc -Wl,--end-group -nostdlib
-endif
-
 STRIP = $(CROSS_COMPILE)strip
 OBJCOPY = $(CROSS_COMPILE)objcopy
 GDB = $(CROSS_COMPILE)gdb
@@ -147,11 +138,7 @@ ALLOW_PEER_ERASE?=0
 #CFLAGS+=-DUSB_NO_DEBUG=1

 # Optimization level, put in comment for debugging
-ifneq ("$(USE_CLANG)","0")
-OPTIMIZATION ?= -Oz
-else
 OPTIMIZATION ?= -Os
-endif

 # Flags
 INCLUDES_USB = -I$(AT91LIB)/usb/include -I$(AT91LIB)
@@ -165,11 +152,6 @@ INCLUDES += -Ilibosmocore/include
 INCLUDES += -Isrc_simtrace -Iinclude
 INCLUDES += -Iapps/$(APP)

-ifneq ("$(USE_CLANG)","0")
-CFLAGS += -Wno-unknown-warning-option -Wno-empty-body -fno-exceptions -fno-unwind-tables --config armv7em_soft_nofp_nosys
-else
-CFLAGS += -Wno-suggest-attribute=noreturn --param max-inline-insns-single=500
-endif
 CFLAGS += -Wall -Wchar-subscripts -Wcomment -Wimplicit-int -Wformat=2
 CFLAGS += -Werror-implicit-function-declaration -Wmain -Wparentheses
 CFLAGS += -Wsequence-point -Wreturn-type -Wswitch -Wtrigraphs #-Wunused
@@ -182,33 +164,22 @@ CFLAGS += -Wredundant-decls -Wnested-externs #-Winline -Wlong-long
 CFLAGS += -Wunreachable-code
 #CFLAGS += -Wcast-align
 #CFLAGS += -std=c11
-#CFLAGS += -Wmissing-noreturn
+CFLAGS += -Wmissing-noreturn
 #CFLAGS += -Wconversion
 CFLAGS += -Wno-unused-but-set-variable -Wno-unused-variable
-
+CFLAGS += -Wno-suggest-attribute=noreturn

 # -mlong-calls  -Wall
 #CFLAGS += -save-temps -fverbose-asm
 #CFLAGS += -Wa,-a,-ad
 CFLAGS += -D__ARM -fno-builtin
-CFLAGS += -mcpu=cortex-m3 -mthumb # -mfix-cortex-m3-ldrd
+CFLAGS += --param max-inline-insns-single=500 -mcpu=cortex-m3 -mthumb # -mfix-cortex-m3-ldrd
 CFLAGS += -ffunction-sections -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -DTRACE_LEVEL=$(TRACE_LEVEL) -DALLOW_PEER_ERASE=$(ALLOW_PEER_ERASE)
 CFLAGS += -DGIT_VERSION=\"$(GIT_VERSION)\"
 CFLAGS += -DBOARD=\"$(BOARD)\" -DBOARD_$(BOARD)
 CFLAGS += -DAPPLICATION=\"$(APP)\" -DAPPLICATION_$(APP)
-
-# Disable stack protector by default (OS#5081)
-ifeq ($(STACK_PROTECTOR), 1)
-CFLAGS += -fstack-protector
-else
-CFLAGS += -fno-stack-protector
-endif
-
 ASFLAGS = -mcpu=cortex-m3 -mthumb -Wall -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -D__ASSEMBLY__
-LDFLAGS = -mcpu=cortex-m3 -mthumb -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=ResetException -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--no-undefined $(LIB)
-ifeq ("$(USE_CLANG)","0")
-LDFLAGS += -Wl,--warn-section-align -Wl,--print-memory-usage
-endif
+LDFLAGS = -mcpu=cortex-m3 -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=ResetException -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--print-memory-usage -Wl,--no-undefined $(LIB)
 #LD_OPTIONAL=-Wl,--print-gc-sections -Wl,--stats

 # Append BIN directories to output filename
@@ -218,7 +189,7 @@ OUTPUT := $(BIN)/$(OUTPUT)
 #		Rules
 #-------------------------------------------------------------------------------

-all: $(BIN) $(OBJ) $(MEMORIES)
+all: apps/$(APP)/usb_strings_generated.h $(BIN) $(OBJ) $(MEMORIES)

 combined: $(OUTPUT)-combined.bin

@@ -229,7 +200,7 @@ $(BIN)/$(BOARD)-dfu-flash-padded.bin: $(BIN)/$(BOARD)-dfu-flash.bin
 $(OUTPUT)-combined.bin: $(BIN)/$(BOARD)-dfu-flash-padded.bin $(OUTPUT)-dfu.bin
 	cat $^ > $@

-$(BIN) $(OBJ): apps/$(APP)/usb_strings_generated.h
+$(BIN) $(OBJ):
 	mkdir -p $@

 usbstring/usbstring: usbstring/usbstring.c
@@ -245,48 +216,26 @@ apps/$(APP)/usb_strings_generated.h: apps/$(APP)/usb_strings.txt.patched usbstri
 define RULES
 C_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(C_OBJECTS))
 ASM_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(ASM_OBJECTS))
-EXTRA_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(EXTRA_OBJECTS))

-build_$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1)) $$(EXTRA_OBJECTS_$(1))
-	$(SILENT)$(CC) $(CFLAGS) $(LDFLAGS) $(LD_OPTIONAL) -T"libboard/common/resources/$(CHIP)/$(1).ld" -Wl,-Map,$(OUTPUT)-$(1).map -o $(OUTPUT)-$(1).elf $$^ $(LIBS)
-	$(SILENT)$(NM) $(OUTPUT)-$(1).elf >$(OUTPUT)-$(1).elf.txt
-	$(SILENT)$(OBJCOPY) -O binary $(OUTPUT)-$(1).elf $(OUTPUT)-$(1).bin
-	$(SILENT)$(SIZE) $$^ $(OUTPUT)-$(1).elf
+$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1))
+	$(SILENT)$(CC) $(LDFLAGS) $(LD_OPTIONAL) -T"libboard/common/resources/$(CHIP)/$$@.ld" -Wl,-Map,$(OUTPUT)-$$@.map -o $(OUTPUT)-$$@.elf $$^ $(LIBS)
+	$(SILENT)$(NM) $(OUTPUT)-$$@.elf >$(OUTPUT)-$$@.elf.txt
+	$(SILENT)$(OBJCOPY) -O binary $(OUTPUT)-$$@.elf $(OUTPUT)-$$@.bin
+	$(SILENT)$(SIZE) $$^ $(OUTPUT)-$$@.elf

 $$(C_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.c Makefile $(OBJ) $(BIN)
 	@echo [COMPILING $$<]
-	$(SILENT)$(CC) $(CFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -c -o $$@ $$<
+	$(SILENT)$(CC) $(CFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -Wa,-ahlms=$(BIN)/$$*.lst -c -o $$@ $$<

 $$(ASM_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.S Makefile $(OBJ) $(BIN)
 	@echo [ASSEMBLING $$@]
-	$(SILENT)$(CC) $(ASFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -c -o $$@ $$<
+	$(SILENT)@$(CC) $(ASFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -c -o $$@ $$<

 debug_$(1): $(1)
 	$(GDB) -x "$(BOARD_LIB)/resources/gcc/$(BOARD)_$(1).gdb" -ex "reset" -readnow -se $(OUTPUT)-$(1).elf
 endef

-ALL_MEMORIES = dfu flash ram
-$(foreach MEMORY, $(ALL_MEMORIES), $(eval $(call RULES,$(MEMORY))))
-
-# files with those names do exist..
-.PHONY: ram
-.PHONY: dfu
-.PHONY: flash
-ram: build_ram
-dfu: build_dfu
-ifeq ($(APP), blupdate)
-	$(info updating updater section with padded bootloader file..)
-	$(SILENT)dd if=/dev/zero bs=16384 count=1 of=$(BIN)/$(BOARD)-dfu-flash-padded.bin
-	$(SILENT)dd if=$(BIN)/$(BOARD)-dfu-flash.bin conv=notrunc of=$(BIN)/$(BOARD)-dfu-flash-padded.bin
-	$(SILENT)$(OBJCOPY) --update-section .blupdate=bin/$(BOARD)-dfu-flash-padded.bin bin/$(BOARD)-blupdate-dfu.elf
-	$(SILENT)$(OBJCOPY) -O binary bin/$(BOARD)-blupdate-dfu.elf bin/$(BOARD)-blupdate-dfu.bin
-endif
-flash: build_flash
-#alternate way of embedding: obj file
-#ifeq ($(APP), dfu)
-#	$(info bootloader bin file to obj..)
-#	$(SILENT)$(OBJCOPY) --rename-section .data=.fwupdate -I binary -O elf32-littlearm bin/$(BOARD)-dfu-flash.bin $(OBJ)/flash_fwupdate.o
-#endif
+$(foreach MEMORY, $(MEMORIES), $(eval $(call RULES,$(MEMORY))))

 program:
 	openocd -f openocd/openocd.cfg -c "init" -c "halt" -c "flash write_bank 0 ./bin/project-flash.bin 0" -c "reset" -c "shutdown"
--- a/firmware/apps/blupdate/Makefile
+++ b/firmware/apps/blupdate/Makefile
@@ -1,12 +0,0 @@
-
-C_FILES += $(C_LIBUSB_DFU)
-
-# Trace level used for compilation
-# (can be overridden by adding TRACE_LEVEL=#number to the command-line)
-# TRACE_LEVEL_DEBUG      5
-# TRACE_LEVEL_INFO       4
-# TRACE_LEVEL_WARNING    3
-# TRACE_LEVEL_ERROR      2
-# TRACE_LEVEL_FATAL      1
-# TRACE_LEVEL_NO_TRACE   0
-TRACE_LEVEL ?= 3
--- a/firmware/apps/blupdate/main.c
+++ b/firmware/apps/blupdate/main.c
@@ -1,134 +0,0 @@
-/* SIMtrace 2 firmware USB DFU bootloader
- *
- * (C) 2015-2017 by Harald Welte <hwelte@hmw-consulting.de>
- * (C) 2018-2019 by sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-#include "board.h"
-#include "core_cm3.h"
-#include "flashd.h"
-#include "utils.h"
-#include "usb/device/dfu/dfu.h"
-#include "usb/common/dfu/usb_dfu.h"
-#include "manifest.h"
-#include "USBD_HAL.h"
-
-#include <osmocom/core/timer.h>
-
-/* actual section content must be replaced with the padded bootloader by running objcopy! */
-const uint32_t bl_update_data[BOARD_DFU_BOOT_SIZE / sizeof(uint32_t)] __attribute__((section(".fwupdate"))) = { 0xFF };
-
-unsigned int g_unique_id[4];
-/* remember if the watchdog has been configured in the main loop so we can kick it in the ISR */
-static bool watchdog_configured = false;
-
-extern uint32_t _end;
-extern uint32_t _srelocate;
-extern uint32_t _etext;
-
-void DFURT_SwitchToDFU(void)
-{
-}
-void USBDFU_Runtime_RequestHandler(const USBGenericRequest *request)
-{
-}
-int USBDFU_handle_dnload(uint8_t altif, unsigned int offset, uint8_t *data, unsigned int len)
-{
-	return 0;
-}
-int USBDFU_handle_upload(uint8_t altif, unsigned int offset, uint8_t *data, unsigned int req_len)
-{
-	return 0;
-}
-int USBDFU_OverrideEnterDFU(void)
-{
-	return 0;
-}
-
-__attribute__((section(".ramfunc"), noinline)) static uint32_t flash_wait_ready()
-{
-	Efc *efc = EFC;
-	uint32_t dwStatus;
-
-	do {
-		dwStatus = efc->EEFC_FSR;
-	} while ((dwStatus & EEFC_FSR_FRDY) != EEFC_FSR_FRDY);
-	return (dwStatus & (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE));
-}
-
-__attribute__((section(".ramfunc"), noinline)) static void flash_cmd(uint32_t dwCommand, uint32_t dwArgument)
-{
-	Efc *efc = EFC;
-	uint32_t dwStatus;
-	efc->EEFC_FCR = EEFC_FCR_FKEY(0x5A) | EEFC_FCR_FARG(dwArgument) | EEFC_FCR_FCMD(dwCommand);
-}
-
-__attribute__((section(".ramfunc"), noinline, noreturn)) static void erase_first_app_sector()
-{
-	/* page 64 */
-	uint32_t first_app_page = (BOARD_DFU_BOOT_SIZE / IFLASH_PAGE_SIZE);
-	uint32_t *first_app_address = (uint32_t *)(IFLASH_ADDR + first_app_page * IFLASH_PAGE_SIZE + 0);
-
-#if 1
-	/* overwrite first app sector so we don't keep booting this */
-	for (int i = 0; i < IFLASH_PAGE_SIZE / 4; i++)
-		first_app_address[i] = 0xffffffff;
-
-	flash_cmd(EFC_FCMD_EWP, first_app_page);
-#else
-	/* why does erasing the whole flash with a protected bootloader not work at all? */
-	flash_cmd(EFC_FCMD_EA, 0);
-#endif
-	flash_wait_ready();
-	for (;;)
-		NVIC_SystemReset();
-}
-
-#define MAX_USB_ITER BOARD_MCK / 72 // This should be around a second
-extern int main(void)
-{
-	uint8_t isUsbConnected = 0;
-	unsigned int i = 0;
-	uint32_t reset_cause = (RSTC->RSTC_SR & RSTC_SR_RSTTYP_Msk) >> RSTC_SR_RSTTYP_Pos;
-
-	/* Enable watchdog for 2000ms, with no window */
-	WDT_Enable(WDT, WDT_MR_WDRSTEN | WDT_MR_WDDBGHLT | WDT_MR_WDIDLEHLT | (WDT_GetPeriod(2000) << 16) |
-				WDT_GetPeriod(2000));
-	watchdog_configured = true;
-
-	EEFC_ReadUniqueID(g_unique_id);
-
-	printf("\n\r\n\r");
-	printf("bootloader updater %s for board %s\n\r"
-	       "(C) 2010-2017 by Harald Welte, 2018-2019 by Kevin Redon\n\r",
-	       manifest_revision, manifest_board);
-
-	/* clear g_dfu on power-up reset */
-	memset(g_dfu, 0, sizeof(*g_dfu));
-
-	TRACE_INFO("USB init...\n\r");
-	/* Signal USB reset by disabling the pull-up on USB D+ for at least 10 ms */
-	USBD_Disconnect();
-
-	/* Initialize the flash to be able to write it, using the IAP ROM code */
-	FLASHD_Initialize(BOARD_MCK, 1);
-
-	__disable_irq();
-	FLASHD_Unlock(IFLASH_ADDR, IFLASH_ADDR + IFLASH_SIZE - 1, 0, 0);
-	FLASHD_Write(IFLASH_ADDR, bl_update_data, BOARD_DFU_BOOT_SIZE);
-
-	erase_first_app_sector();
-}
--- a/firmware/apps/blupdate/usb_strings.txt
+++ b/firmware/apps/blupdate/usb_strings.txt
@@ -1,6 +0,0 @@
-sysmocom - s.f.m.c. GmbH
-PRODUCT_STRING
-bootloader updater
-RAM
-Flash (Application Partition)
-Flash (Bootloader Partition)
--- a/firmware/apps/cardem/main.c
+++ b/firmware/apps/cardem/main.c
@@ -71,13 +71,8 @@ static const conf_func config_func_ptrs[] = {
 		.init = mode_cardemu_init,
 		.exit = mode_cardemu_exit,
 		.run = mode_cardemu_run,
-#if defined (ngff_cardem)
-		.usart0_irq = mode_cardemu_usart1_irq,
-		.usart1_irq = mode_cardemu_usart0_irq,
-#else
 		.usart0_irq = mode_cardemu_usart0_irq,
 		.usart1_irq = mode_cardemu_usart1_irq,
-#endif
 	},
 #endif
 #ifdef HAVE_MITM
--- a/firmware/apps/dfu/main.c
+++ b/firmware/apps/dfu/main.c
@@ -271,7 +271,7 @@ extern int main(void)

 #ifdef PINS_LEDS
 	/* Configure LED */
-	PIO_Configure(pinsLeds, PIO_LISTSIZE(pinsLeds));
+	PIO_Configure(pinsLeds, sizeof(pinsLeds));
 	PIO_Set(&pinsLeds[LED_NUM_RED]);
 	PIO_Clear(&pinsLeds[LED_NUM_GREEN]);
 #endif
@@ -342,7 +342,16 @@ extern int main(void)
 	TRACE_INFO("USB init...\n\r");
 	/* Signal USB reset by disabling the pull-up on USB D+ for at least 10 ms */
 	USBD_Disconnect();
-	mdelay(500);
+#ifdef PIN_USB_PULLUP
+	const Pin usb_dp_pullup = PIN_USB_PULLUP;
+	PIO_Configure(&usb_dp_pullup, 1);
+	PIO_Set(&usb_dp_pullup);
+#endif
+	mdelay(50);
+#ifdef PIN_USB_PULLUP
+	PIO_Clear(&usb_dp_pullup);
+#endif
+
 	USBDFU_Initialize(&dfu_descriptors);

 	while (USBD_GetState() < USBD_STATE_CONFIGURED) {
--- a/firmware/atmel_softpack_libraries/libchip_sam3s/source/exceptions.c
+++ b/firmware/atmel_softpack_libraries/libchip_sam3s/source/exceptions.c
@@ -151,7 +151,8 @@ WEAK void HardFault_Handler( void )
 		" mrseq r0, msp		\n"
 		" mrsne r0, psp		\n"
 		//" ldr r1, [r0, #24] 	\n"
-		" b hard_fault_handler_c\n");
+		" b hard_fault_handler_c\n"
+		".syntax divided	\n");
 }

 /**
--- a/firmware/libboard/common/include/led.h
+++ b/firmware/libboard/common/include/led.h
@@ -31,8 +31,7 @@ enum led_pattern {
 	BLINK_200O_F		= 7,
 	BLINK_600O_F		= 8,
 	BLINK_CUSTOM		= 9,
-	BLINK_2F_O		= 10,
-	BLINK_5O_5F		= 11,
+	BLINK_2F_O,
 	_NUM_LED_BLINK
 };

--- a/firmware/libboard/common/resources/sam3s4/dfu.ld
+++ b/firmware/libboard/common/resources/sam3s4/dfu.ld
@@ -96,18 +96,13 @@ SECTIONS
        _efixed = .;            /* End of text section */
    } > rom

-    /DISCARD/ :
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    PROVIDE_HIDDEN (__exidx_start = .);
+    .ARM.exidx :
    {
-        *(.ARM.exidx)
-    }
-
-    .blupdate :
-    {
-        . = ALIGN(4);
-        _blupdate_start = .;
-        KEEP(*(.fwupdate .fwupdate.*));
-        _blupdate_end = .;
+      *(.ARM.exidx* .gnu.linkonce.armexidx.*)
    } > rom
+    PROVIDE_HIDDEN (__exidx_end = .);

    . = ALIGN(4); 
    _etext = .;
--- a/firmware/libboard/common/resources/sam3s4/flash.ld
+++ b/firmware/libboard/common/resources/sam3s4/flash.ld
@@ -94,10 +94,13 @@ SECTIONS
        _efixed = .;            /* End of text section */
    } > rom

-    /DISCARD/ :
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    PROVIDE_HIDDEN (__exidx_start = .);
+    .ARM.exidx :
    {
-        *(.ARM.exidx)
-    }
+      *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > rom
+    PROVIDE_HIDDEN (__exidx_end = .);

    . = ALIGN(4); 
    _etext = .;
--- a/firmware/libboard/common/source/led.c
+++ b/firmware/libboard/common/source/led.c
@@ -58,10 +58,6 @@ static const struct blink_state bs_on[] = {
 	{ 0, 1 }
 };

-static const struct blink_state bs_5on_5off[] = {
-	{ 500, 1 }, { 500, 0 }
-};
-
 static const struct blink_state bs_3on_5off[] = {
 	{ 300, 1 }, { 500, 0 }
 };
@@ -111,10 +107,6 @@ static const struct blink_pattern patterns[] = {
 		.states = bs_on,
 		.size = ARRAY_SIZE(bs_on),
 	},
-	[BLINK_5O_5F] = {
-		.states = bs_5on_5off,
-		.size = ARRAY_SIZE(bs_5on_5off),
-	},
 	[BLINK_3O_5F] = {
 		.states = bs_3on_5off,
 		.size = ARRAY_SIZE(bs_3on_5off),
--- a/firmware/libboard/ngff_cardem/include/board.h
+++ b/firmware/libboard/ngff_cardem/include/board.h
@@ -1,166 +0,0 @@
-/* Osmocom ngff-cardem board definition
- *
- * (C) 2021 by Harald Welte <laforge@osmocom.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#pragma once
-#include "board_common.h"
-#include "simtrace_usb.h"
-
-/** Name of the board */
-#define BOARD_NAME "NGFF-CARDEM"
-/** Board definition */
-#define ngff_cardem
-
-/** oscillator used as main clock source (in Hz) */
-#define BOARD_MAINOSC 12000000
-/** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */
-#define BOARD_MCK 58000000 // 12.000 * 29 / 6
-
-/** MCU pin connected to red LED */
-#define PIO_LED_RED     PIO_PA17
-/** MCU pin connected to green LED */
-#define PIO_LED_GREEN   PIO_PA18
-/** red LED pin definition */
-#define PIN_LED_RED     {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-/** green LED pin definition */
-#define PIN_LED_GREEN   {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-/** LEDs pin definition */
-#define PINS_LEDS       PIN_LED_RED, PIN_LED_GREEN 
-/** index for red LED in LEDs pin definition array */
-#define LED_NUM_RED     0
-/** index for green LED in LEDs pin definition array */
-#define LED_NUM_GREEN   1
-/** the green LED is actually red and used as indication for USIM1 */
-#define LED_USIM1	LED_GREEN
-
-/* USIM 2 interface (USART) */
-#define PIN_USIM2_CLK		{PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-#define PIN_USIM2_IO		{PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
-#define PINS_ISO7816_USIM2	PIN_USIM2_CLK, PIN_USIM2_IO
-
-/* USIM 2 interface (TC) */
-#define PIN_USIM2_IO_TC		{PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-#define PIN_USIM2_CLK_TC	{PIO_PA4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-#define PINS_TC_USIM2		PIN_USIM2_IO_TC, PIN_USIM2_CLK_TC
-
-/* USIM 1 interface (USART) */
-#define PIN_USIM1_IO		{PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
-#define PIN_USIM1_CLK		{PIO_PA23, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
-#define PINS_ISO7816_USIM1	PIN_USIM1_CLK, PIN_USIM1_IO
-
-/* USIM 1 interface (TC) */
-#define PIN_USIM1_IO_TC		{PIO_PA27, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-#define PIN_USIM1_CLK_TC	{PIO_PA29, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-#define PINS_TC_USIM1		PIN_USIM1_IO_TC, PIN_USIM1_CLK_TC
-
-#define PIN_USIM1_nRST		{PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
-#define PIN_USIM1_VCC		{PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
-
-#define PIN_USIM2_nRST		{PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
-//#define PIN_USIM2_VCC		{PIO_PB2, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
-
-#define PINS_USIM1		PINS_TC_USIM1, PINS_ISO7816_USIM1, PIN_USIM1_nRST
-#define PINS_USIM2		PINS_TC_USIM2, PINS_ISO7816_USIM2, PIN_USIM2_nRST
-
-/* from v3 and onwards only (!) */
-#define PIN_DET_USIM1_PRES	{PIO_PA8, PIOA, ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_IT_EDGE}
-
-/* inputs reading the WWAN LED level */
-#define PIN_WWAN1		{PIO_PA15, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE}
-#define PINS_WWAN_IN		{ PIN_WWAN1 }
-
-#define PIN_MODEM_EN {PIO_PA11, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define PIN_N_MODEM_PWR_ON {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-
-/* outputs controlling RESET input of modems */
-#define PIN_PERST1		{PIO_PA25, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define PINS_PERST		{ PIN_PERST1 }
-
-#define PIN_VERSION_DET		{PIO_PA19, PIOA, ID_PIOA, PIO_PERIPH_D, PIO_DEFAULT}
-
-/* GPIO towards SPDT switches between real SIM and SAM3 */
-//#define PIN_SIM_SWITCH1 {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-//#define PIN_SIM_SWITCH2 {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-
-#define BOARD_USB_BMATTRIBUTES	USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
-
-#define BOARD_USB_VENDOR_ID	USB_VENDOR_OPENMOKO
-#define BOARD_USB_PRODUCT_ID	USB_PRODUCT_NGFF_CARDEM
-#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_NGFF_CARDEM
-#define BOARD_USB_RELEASE	0x010
-
-#define DETECT_VCC_BY_ADC
-#define VCC_UV_THRESH_1V8	1500000
-#define VCC_UV_THRESH_3V	VCC_UV_THRESH_1V8
-
-#ifdef APPLICATION_cardem
-#define HAVE_CARDEM
-#define HAVE_BOARD_CARDINSERT
-struct cardem_inst;
-void board_set_card_insert(struct cardem_inst *ci, bool card_insert);
-#endif
-
-#ifdef APPLICATION_trace
-#define HAVE_SNIFFER
-#endif
-
-/* Card I/O data signal input/output (I/O_SIM in schematic) */
-#define PIN_SIM_IO             {PIO_PA6A_TXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
-/* Card CLK clock input (CLK_SIM in schematic) */
-#define PIN_SIM_CLK            {PIO_PA2B_SCK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-/* Card RST reset signal input (use as input since the phone will drive it) */
-#define PIN_SIM_RST_SNIFF      {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_IT_EDGE}
-/* Pins used to sniff phone-card communication */
-#define PINS_SIM_SNIFF          PIN_SIM_IO, PIN_SIM_CLK, PIN_SIM_RST_SNIFF
-
-/* Pin to measure card I/O timing (to start measuring the ETU on I/O activity; connected I/O_SIM in schematic) */
-#define PIN_SIM_IO_INPUT       {PIO_PA1B_TIOB0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-/* Pin used as clock input (to measure the ETU duration; connected to CLK_SIM in schematic) */
-#define PIN_SIM_CLK_INPUT      {PIO_PA4B_TCLK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
-/* Pins used to measure ETU timing (using timer counter) */ 
-#define PINS_TC                 PIN_SIM_IO_INPUT, PIN_SIM_CLK_INPUT
-
-//default state: NO uart connected, modem connected to physical sim, NO sim presence override, modem powers sim slot
-#define pin_conn_usim1_default {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_conn_usim2_default {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_conn_mdm_sim_default {PIO_PA0, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-#define pin_conn_set_sim_det_default {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_en_st_sim_vdd_default {PIO_PB2, PIOB, ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT}
-#define pin_en_mdm_sim_vdd_default {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-
-//cardem state: uart2 (!) connected, NO modem connected to physical sim, sim presence override, NOTHING powers sim slot
-#define pin_conn_usim1_cem {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_conn_usim2_cem {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-#define pin_conn_mdm_sim_cem {PIO_PA0, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_en_st_sim_vdd_cem {PIO_PB2, PIOB, ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT}
-#define pin_en_mdm_sim_vdd_cem {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-
-//trace state: uart2 (!) connected, modem connected to physical sim, st powers sim slot
-#define pin_conn_usim1_trace {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_conn_usim2_trace {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-#define pin_conn_mdm_sim_trace {PIO_PA0, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-#define pin_conn_set_sim_det_trace {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_en_st_sim_vdd_trace {PIO_PB2, PIOB, ID_PIOB, PIO_OUTPUT_1, PIO_DEFAULT}
-#define pin_en_mdm_sim_vdd_trace {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-
-#define PIN_MODEM_EN_off {PIO_PA11, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-
-#define PINS_SIM_DEFAULT pin_conn_usim1_default, pin_conn_usim2_default, pin_conn_mdm_sim_default, pin_conn_set_sim_det_default, PIN_N_MODEM_PWR_ON, PIN_MODEM_EN, pin_en_st_sim_vdd_default, pin_en_mdm_sim_vdd_default
-#define PINS_SIM_CARDEM pin_conn_usim1_cem, pin_conn_usim2_cem, pin_conn_mdm_sim_cem, pin_en_mdm_sim_vdd_cem, pin_en_st_sim_vdd_cem// , pin_conn_set_sim_det_cem
-
-#define PINS_BUS_SNIFF pin_conn_usim1_trace, pin_conn_usim2_trace, pin_conn_mdm_sim_trace, pin_conn_set_sim_det_trace,PIN_MODEM_EN_off
-#define PINS_PWR_SNIFF PIN_N_MODEM_PWR_ON, PIN_MODEM_EN, pin_en_st_sim_vdd_trace, pin_en_mdm_sim_vdd_trace
--- a/firmware/libboard/ngff_cardem/include/card_pres.h
+++ b/firmware/libboard/ngff_cardem/include/card_pres.h
@@ -1,22 +0,0 @@
-/* card presence utilities
- *
- * (C) 2016-2017 by Harald Welte <hwelte@hmw-consulting.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#pragma once
-
-int is_card_present(int port);
-int card_present_init(void);
--- a/firmware/libboard/ngff_cardem/include/wwan_led.h
+++ b/firmware/libboard/ngff_cardem/include/wwan_led.h
@@ -1,20 +0,0 @@
-/* Code to read/track the status of the WWAN LEDs of attached modems
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#pragma once
-
-int wwan_led_active(int wwan);
-int wwan_led_init(void);
--- a/firmware/libboard/ngff_cardem/include/wwan_perst.h
+++ b/firmware/libboard/ngff_cardem/include/wwan_perst.h
@@ -1,21 +0,0 @@
-/* Code to control the PERST lines of attached modems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#pragma once
-
-int wwan_perst_set(int modem_nr, int active);
-int wwan_perst_do_reset_pulse(int modem_nr, unsigned int duration_ms);
-int wwan_perst_init(void);
--- a/firmware/libboard/ngff_cardem/product_string.txt
+++ b/firmware/libboard/ngff_cardem/product_string.txt
@@ -1 +0,0 @@
-ngff-cardem
--- a/firmware/libboard/ngff_cardem/source/board_ngff_cardem.c
+++ b/firmware/libboard/ngff_cardem/source/board_ngff_cardem.c
@@ -1,159 +0,0 @@
-/* sysmocom ngff-cardem application code
- *
- * (C) 2021 Harald Welte <laforge@osmocom.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#include "board.h"
-#include "simtrace.h"
-#include "utils.h"
-#include "led.h"
-#include "wwan_led.h"
-#include "wwan_perst.h"
-#include "sim_switch.h"
-#include "boardver_adc.h"
-#include "card_pres.h"
-#include <osmocom/core/timer.h>
-#include "usb_buf.h"
-
-/* array of generated USB Strings */
-extern unsigned char *usb_strings[];
-
-/* returns '1' in case we should break any endless loop */
-void board_exec_dbg_cmd(int ch)
-{
-	switch (ch) {
-	case '?':
-		printf("\t?\thelp\n\r");
-		printf("\tR\treset SAM3\n\r");
-		printf("\tl\tswitch off LED 1\n\r");
-		printf("\tL\tswitch on  LED 1\n\r");
-		printf("\tg\tswitch off LED 2\n\r");
-		printf("\tG\tswitch on  LED 2\n\r");
-		printf("\t1\tGenerate 1ms reset pulse on WWAN1\n\r");
-		printf("\t!\tSwitch Channel A from physical -> remote\n\r");
-		printf("\tt\t(pseudo)talloc report\n\r");
-		break;
-	case 'R':
-		printf("Asking NVIC to reset us\n\r");
-		USBD_Disconnect();
-		NVIC_SystemReset();
-		break;
-	case 'l':
-		led_blink(LED_GREEN, BLINK_ALWAYS_OFF);
-		printf("LED 1 switched off\n\r");
-		break;
-	case 'L':
-		led_blink(LED_GREEN, BLINK_ALWAYS_ON);
-		printf("LED 1 switched on\n\r");
-		break;
-	case 'g':
-		led_blink(LED_RED, BLINK_ALWAYS_OFF);
-		printf("LED 2 switched off\n\r");
-		break;
-	case 'G':
-		led_blink(LED_RED, BLINK_ALWAYS_ON);
-		printf("LED 2 switched on\n\r");
-		break;
-	case '1':
-		printf("Resetting Modem\n\r");
-		wwan_perst_do_reset_pulse(0, 300);
-		break;
-	case '!':
-		sim_switch_use_physical(0, 0);
-		break;
-	case 't':
-		talloc_report(NULL, stdout);
-		break;
-	default:
-		printf("Unknown command '%c'\n\r", ch);
-		break;
-	}
-}
-
-void board_main_top(void)
-{
-#ifndef APPLICATION_dfu
-	usb_buf_init();
-
-	wwan_led_init();
-	wwan_perst_init();
-	sim_switch_init();
-#endif
-
-	/* Obtain the circuit board version (currently just prints voltage) */
-	get_board_version_adc();
-#ifndef APPLICATION_dfu
-	/* Initialize checking for card insert/remove events */
-	card_present_init();
-#endif
-	wwan_perst_set(0, 0);
-}
-
-static int uart_has_loopback_jumper(void)
-{
-	unsigned int i;
-	const Pin uart_loopback_pins[] = {
-		{PIO_PA9A_URXD0, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT},
-		{PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
-	};
-
-	/* Configure UART pins as I/O */
-	PIO_Configure(uart_loopback_pins, PIO_LISTSIZE(uart_loopback_pins));
-
-	/* Send pattern over UART TX and check if it is received on RX
-	 * If the loop doesn't get interrupted, RxD always follows TxD and thus a
-	 * loopback jumper has been placed on RxD/TxD, and we will boot
-	 * into DFU unconditionally
-	 */
-	int has_loopback_jumper = 1;
-	for (i = 0; i < 10; i++) {
-		/* Set TxD high; abort if RxD doesn't go high either */
-		PIO_Set(&uart_loopback_pins[1]);
-		if (!PIO_Get(&uart_loopback_pins[0])) {
-			has_loopback_jumper = 0;
-			break;
-		}
-		/* Set TxD low, abort if RxD doesn't go low either */
-		PIO_Clear(&uart_loopback_pins[1]);
-		if (PIO_Get(&uart_loopback_pins[0])) {
-			has_loopback_jumper = 0;
-			break;
-		}
-	}
-
-	/* Put pins back to UART mode */
-	const Pin uart_pins[] = {PINS_UART};
-	PIO_Configure(uart_pins, PIO_LISTSIZE(uart_pins));
-
-	return has_loopback_jumper;
-}
-
-int board_override_enter_dfu(void)
-{
-	/* If the loopback jumper is set, we enter DFU mode */
-	if (uart_has_loopback_jumper())
-		return 1;
-
-	return 0;
-}
-
- static const Pin deton = {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT};
- static const Pin detoff = {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT};
-
-void board_set_card_insert(struct cardem_inst *ci, bool card_insert)
-{
-	PIO_Configure(card_insert ? &deton : &detoff, 1);
-}
--- a/firmware/libboard/ngff_cardem/source/card_pres.c
+++ b/firmware/libboard/ngff_cardem/source/card_pres.c
@@ -1,76 +0,0 @@
-/* card presence utilities
- *
- * (C) 2016-2021 by Harald Welte <hwelte@hmw-consulting.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#include <osmocom/core/timer.h>
-#include "board.h"
-#include "utils.h"
-#include "card_pres.h"
-
-#define NUM_CARDPRES	1
-
-#define TIMER_INTERVAL_MS	500
-
-static const Pin pin_cardpres[NUM_CARDPRES] = { PIN_DET_USIM1_PRES };
-static int last_state[NUM_CARDPRES] = { -1 };
-static struct osmo_timer_list cardpres_timer;
-
-/* Determine if a SIM card is present in the given slot */
-int is_card_present(int port)
-{
-	const Pin *pin;
-	int present;
-
-	if (port < 0 || port >= NUM_CARDPRES)
-		return -1;
-	pin = &pin_cardpres[port];
-
-
-	/* high active here */
-	present = PIO_Get(pin);
-
-	return present;
-}
-
-static void cardpres_tmr_cb(void *data)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(pin_cardpres); i++) {
-		int state = is_card_present(i);
-		if (state != last_state[i]) {
-			TRACE_INFO("%u: Card Detect Status %d -> %d\r\n", i, last_state[i], state);
-			/* FIXME: report to USB host */
-			last_state[i] = state;
-		}
-	}
-
-	osmo_timer_schedule(&cardpres_timer, 0, TIMER_INTERVAL_MS*1000);
-}
-
-int card_present_init(void)
-{
-	unsigned int i;
-
-	PIO_Configure(pin_cardpres, ARRAY_SIZE(pin_cardpres));
-
-	/* start timer */
-	cardpres_timer.cb = cardpres_tmr_cb;
-	osmo_timer_schedule(&cardpres_timer, 0, TIMER_INTERVAL_MS*1000);
-
-	return 2;
-}
--- a/firmware/libboard/ngff_cardem/source/sim_switch.c
+++ b/firmware/libboard/ngff_cardem/source/sim_switch.c
@@ -1,81 +0,0 @@
-/* Code to switch between local (physical) and remote (emulated) SIM
- *
- * (C) 2015-2017 by Harald Welte <hwelte@hmw-consulting.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#include "board.h"
-#include "trace.h"
-#include "led.h"
-#include "sim_switch.h"
-
-//uart12bus	2-20e pa20
-//uart22bus	1-20e pa28
-//usim2bus	1-10e pa0  pivot
-//sim det	2-10e pa13
-
-static const Pin pins_default[]	= {PINS_SIM_DEFAULT};
-static const Pin pins_cem[]	= {PINS_SIM_CARDEM};
-
-static int initialized = 0;
-
-int sim_switch_use_physical(unsigned int nr, int physical)
-{
-	const Pin pin = PIN_MODEM_EN;// PIN_N_MODEM_PWR_ON;
-	enum led led;
-
-	if (!initialized) {
-		TRACE_ERROR("Somebody forgot to call sim_switch_init()\r\n");
-		sim_switch_init();
-	}
-
-	TRACE_INFO("Modem %d: %s SIM\n\r", nr,
-		   physical ? "physical" : "virtual");
-
-	switch (nr) {
-	case 0:
-		led = LED_USIM1;
-		break;
-
-	default:
-		TRACE_ERROR("Invalid SIM%u\n\r", nr);
-		return -1;
-	}
-
-	if (physical) {
-		TRACE_INFO("%u: Use local/physical SIM\r\n", nr);
-		PIO_Configure(pins_default, PIO_LISTSIZE(pins_default));
-		led_blink(led, BLINK_ALWAYS_ON);
-	} else {
-		TRACE_INFO("%u: Use remote/emulated SIM\r\n", nr);
-		PIO_Configure(pins_cem, PIO_LISTSIZE(pins_cem));
-		led_blink(led, BLINK_5O_5F);
-	}
-
-	/* just power cycle the modem because this circumvents weird issues with unreliable signals */
-	PIO_Clear(&pin);
-	mdelay(200);
-	PIO_Set(&pin);
-
-
-	return 0;
-}
-
-int sim_switch_init(void)
-{
-	PIO_Configure(pins_default, PIO_LISTSIZE(pins_default));
-	initialized = 1;
-	return 1;
-}
--- a/firmware/libboard/ngff_cardem/source/wwan_led.c
+++ b/firmware/libboard/ngff_cardem/source/wwan_led.c
@@ -1,93 +0,0 @@
-/* Code to read/track the status of the WWAN LEDs of attached modems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-/* Depending on the board this is running on,  it might be possible
- * for the controller to read the status of the WWAN LED output lines of
- * the cellular modem.  If the board supports this, it sets the
- * PIN_WWAN1 and/or PIN_WWAN2 defines in its board.h file.
- */
-#include "board.h"
-#include "wwan_led.h"
-
-#ifdef PIN_WWAN1
-static const Pin pin_wwan1 = PIN_WWAN1;
-
-static void wwan1_irqhandler(const Pin *pPin)
-{
-	int active = wwan_led_active(0);
-
-	TRACE_INFO("0: WWAN LED %u\r\n", active);
-
-	/* TODO: notify host via USB */
-}
-#endif
-
-#ifdef PIN_WWAN2
-static const Pin pin_wwan2 = PIN_WWAN2;
-
-static void wwan2_irqhandler(const Pin *pPin)
-{
-	int active = wwan_led_active(1);
-	TRACE_INFO("1: WWAN LED %u\r\n", active);
-
-	/* TODO: notify host via USB */
-}
-#endif
-
-/* determine if a given WWAN led is currently active or not */
-int wwan_led_active(int wwan)
-{
-	const Pin *pin;
-	int active;
-
-	switch (wwan) {
-#ifdef PIN_WWAN1
-	case 0:
-		pin = &pin_wwan1;
-		break;
-#endif
-#ifdef PIN_WWAN2
-	case 1:
-		pin = &pin_wwan2;
-		break;
-#endif
-	default:
-		return -1;
-	}
-
-	active = PIO_Get(pin) ? 0 : 1;
-	return active;
-}
-
-int wwan_led_init(void)
-{
-	int num_leds = 0;
-
-#ifdef PIN_WWAN1
-	PIO_Configure(&pin_wwan1, 1);
-	PIO_ConfigureIt(&pin_wwan1, wwan1_irqhandler);
-	PIO_EnableIt(&pin_wwan1);
-	num_leds++;
-#endif
-
-#ifdef PIN_WWAN2
-	PIO_Configure(&pin_wwan2, 1);
-	PIO_ConfigureIt(&pin_wwan2, wwan2_irqhandler);
-	PIO_EnableIt(&pin_wwan2);
-	num_leds++;
-#endif
-	return num_leds;
-}
--- a/firmware/libboard/ngff_cardem/source/wwan_perst.c
+++ b/firmware/libboard/ngff_cardem/source/wwan_perst.c
@@ -1,127 +0,0 @@
-/* Code to control the PERST lines of attached modems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-/* Depending on the board this is running on,  it might be possible
- * for the controller to set the status of the PERST input line of
- * the cellular modem.  If the board supports this, it sets the
- * PIN_PERST1 and/or PIN_PERST2 defines in its board.h file.
- */
-#include "board.h"
-#include "trace.h"
-#include "wwan_perst.h"
-#include <osmocom/core/timer.h>
-
-struct wwan_perst {
-	uint8_t idx;
-	const Pin pin;
-	struct osmo_timer_list timer;
-};
-
-#ifdef PIN_PERST1
-static struct wwan_perst perst1 = {
-	.idx = 0,
-	.pin = PIN_PERST1,
-};
-#endif
-
-#ifdef PIN_PERST2
-static struct wwan_perst perst2 = {
-	.idx = 1,
-	.pin = PIN_PERST2,
-};
-#endif
-
-static int initialized = 0;
-
-static void perst_tmr_cb(void *data)
-{
-	struct wwan_perst *perst = data;
-	/* release the (low-active) reset */
-	TRACE_INFO("%u: De-asserting modem reset\r\n", perst->idx);
-	PIO_Clear(&perst->pin);
-}
-
-static struct wwan_perst *get_perst_for_modem(int modem_nr)
-{
-	if (!initialized) {
-		TRACE_ERROR("Somebody forgot to call wwan_perst_init()\r\n");
-		wwan_perst_init();
-	}
-
-	switch (modem_nr) {
-#ifdef PIN_PERST1
-	case 0:
-		return &perst1;
-#endif
-#ifdef PIN_PERST2
-	case 1:
-		return &perst2;
-#endif
-	default:
-		return NULL;
-	}
-}
-
-int wwan_perst_do_reset_pulse(int modem_nr, unsigned int duration_ms)
-{
-	struct wwan_perst *perst = get_perst_for_modem(modem_nr);
-	if (!perst)
-		return -1;
-
-	TRACE_INFO("%u: Asserting modem reset\r\n", modem_nr);
-	PIO_Set(&perst->pin);
-	osmo_timer_schedule(&perst->timer, duration_ms/1000, (duration_ms%1000)*1000);
-
-	return 0;
-}
-
-int wwan_perst_set(int modem_nr, int active)
-{
-	struct wwan_perst *perst = get_perst_for_modem(modem_nr);
-	if (!perst)
-		return -1;
-
-	osmo_timer_del(&perst->timer);
-	if (active) {
-		TRACE_INFO("%u: Asserting modem reset\r\n", modem_nr);
-		PIO_Set(&perst->pin);
-	} else {
-		TRACE_INFO("%u: De-asserting modem reset\r\n", modem_nr);
-		PIO_Clear(&perst->pin);
-	}
-
-	return 0;
-}
-
-int wwan_perst_init(void)
-{
-	int num_perst = 0;
-#ifdef PIN_PERST1
-	PIO_Configure(&perst1.pin, 1);
-	perst1.timer.cb = perst_tmr_cb;
-	perst1.timer.data = (void *) &perst1;
-	num_perst++;
-#endif
-
-#ifdef PIN_PERST2
-	PIO_Configure(&perst2.pin, 1);
-	perst2.timer.cb = perst_tmr_cb;
-	perst2.timer.data = (void *) &perst2;
-	num_perst++;
-#endif
-	initialized = 1;
-	return num_perst;
-}
--- a/firmware/libboard/octsimtest/include/board.h
+++ b/firmware/libboard/octsimtest/include/board.h
@@ -50,28 +50,81 @@
 /* Button to force bootloader start (shorted to ground when pressed */
 #define PIN_BOOTLOADER_SW      {PIO_PA5, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP}

+//FIXME SIM_PWEN_PIN collides with PA5/bootloader_sw on octsimtest
+/* Enable powering the card using the second 3.3 V output of the LDO (active high) */
+#define SIM_PWEN_PIN           {PIO_PA12, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/* Enable powering the SIM card */
+#define PWR_PINS                SIM_PWEN_PIN
+
 // FIXME PA8 is 32khz xtal on octsimtest
+/* Card presence pin */
+#define SW_SIM                  PIO_PA11
 /* Pull card presence pin high (shorted to ground in card slot when card is present) */
+#define SMARTCARD_CONNECT_PIN  {SW_SIM, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_DEGLITCH | PIO_IT_EDGE }
+
+/** Smart card connection **/
+//FIXME
+/* Card RST reset signal input (active low; RST_SIM in schematic) */
+#define PIN_SIM_RST            {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+/* Card I/O data signal input/output (I/O_SIM in schematic) */
+#define PIN_SIM_IO             {PIO_PA6A_TXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+/* Card CLK clock input (CLK_SIM in schematic) */
+#define PIN_SIM_CLK            {PIO_PA2B_SCK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+/* Pin to measure card I/O timing (to start measuring the ETU on I/O activity; connected I/O_SIM in schematic) */
+#define PIN_SIM_IO_INPUT       {PIO_PA1B_TIOB0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+//FIXME PIO_PA4B_TCLK0 PA4 is LED on octsimtest
+/* Pin used as clock input (to measure the ETU duration; connected to CLK_SIM in schematic) */
+#define PIN_SIM_CLK_INPUT      {PIO_PA14, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+/* Pins used to measure ETU timing (using timer counter) */ 
+#define PINS_TC                 PIN_SIM_IO_INPUT, PIN_SIM_CLK_INPUT

 /** Phone connection **/
 /* Phone USIM slot 1 VCC pin (VCC_PHONE in schematic) */
 #define PIN_USIM1_VCC          {PIO_PA25, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
 /* Phone USIM slot 1 RST pin (active low; RST_PHONE in schematic) */
-#define PIN_USIM1_nRST         {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_IT_EDGE | PIO_DEGLITCH }
+#define PIN_USIM1_nRST         {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_IT_RISE_EDGE | PIO_DEGLITCH }
 /* Phone I/O data signal input/output (I/O_PHONE in schematic) */
 #define PIN_PHONE_IO           {PIO_PA22A_TXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
 /* Phone CLK clock input (CLK_PHONE in schematic) */
 #define PIN_PHONE_CLK          {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
-/* Pin used to switch level shifter in I/O line between rx (0) and tx (1) */
-#define PIN_USIM1_IO_DIR	{PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
 /* Pin used for phone USIM slot 1 communication */
-#define PINS_USIM1              PIN_PHONE_IO, PIN_PHONE_CLK, PIN_PHONE_CLK_INPUT, PIN_USIM1_VCC, PIN_PHONE_IO_INPUT, PIN_USIM1_nRST, PIN_USIM1_IO_DIR
+#define PINS_USIM1              PIN_PHONE_IO, PIN_PHONE_CLK, PIN_PHONE_CLK_INPUT, PIN_USIM1_VCC, PIN_PHONE_IO_INPUT, PIN_USIM1_nRST
 /* Phone I/O data signal input/output (unused USART RX input; connected to I/O_PHONE in schematic) */
 #define PIN_PHONE_IO_INPUT     {PIO_PA21A_RXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
 /* Pin used as clock input (to measure the ETU duration; connected to CLK_PHONE in schematic) */
 #define PIN_PHONE_CLK_INPUT    {PIO_PA29B_TCLK2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}

 /** Default pin configuration **/
+/* Disconnect VPP, CLK, and RST lines between card and phone using bus switch (high sets bus switch to high-impedance) */
+#define PIN_SC_SW_DEFAULT      {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/* Disconnect I/O line between card and phone using bus switch (high sets bus switch to high-impedance) */
+#define PIN_IO_SW_DEFAULT      {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/* Disconnect all lines (VPP, CLK, RST, and I/O) between card and phone */
+#define PINS_BUS_DEFAULT        PIN_SC_SW_DEFAULT, PIN_IO_SW_DEFAULT
+
+/** Sniffer configuration **/
+/* Connect VPP, CLK, and RST lines between card and phone using bus switch (low connects signals on bus switch) */
+#define PIN_SC_SW_SNIFF        {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+/* Connect I/O line between card and phone using bus switch (low connects signals on bus switch) */
+#define PIN_IO_SW_SNIFF        {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+/* Connect all lines (VPP, CLK, RST, and I/O) between card and phone */
+#define PINS_BUS_SNIFF          PIN_SC_SW_SNIFF, PIN_IO_SW_SNIFF
+/* Card RST reset signal input (use as input since the phone will drive it) */
+#define PIN_SIM_RST_SNIFF      {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_IT_EDGE}
+/* Pins used to sniff phone-card communication */
+#define PINS_SIM_SNIFF          PIN_SIM_IO, PIN_SIM_CLK, PIN_SIM_RST_SNIFF
+/* Disable power converter 4.5-6V to 3.3V (active high) */
+#define PIN_SIM_PWEN_SNIFF     {SIM_PWEN, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+/* Enable power switch to forward VCC_PHONE to VCC_SIM (active high) */
+#define PIN_VCC_FWD_SNIFF      {VCC_FWD, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+/* Use phone VCC to power card */
+#define PINS_PWR_SNIFF          PIN_SIM_PWEN_SNIFF, PIN_VCC_FWD_SNIFF
+
+/** CCID configuration */
+/* Card RST reset signal input (active low; RST_SIM in schematic) */
+#define PIN_ISO7816_RSTMC      {PIO_PA7, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+/* ISO7816-communication related pins */
+#define PINS_ISO7816            PIN_SIM_IO,  PIN_SIM_CLK,  PIN_ISO7816_RSTMC // SIM_PWEN_PIN, PIN_SIM_IO2, PIN_SIM_CLK2

 /** External SPI flash interface   **/
 /* SPI MISO pin definition */
@@ -87,36 +140,30 @@
 /* SPI flash write protect pin (active low, pulled low) */
 #define PIN_SPI_WP    {PA15, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}

+/** Pin configuration to control USB pull-up on D+
+ *  @details the USB pull-up on D+ is enable by default on the board but can be disabled by setting PA16 high
+ */
+#define PIN_USB_PULLUP  {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+
 /** USB definitions */
 /* OpenMoko SIMtrace 2 USB vendor ID */
 #define BOARD_USB_VENDOR_ID	USB_VENDOR_OPENMOKO
 /* OpenMoko SIMtrace 2 USB product ID (main application/runtime mode) */
-#define BOARD_USB_PRODUCT_ID	USB_PRODUCT_OCTSIMTEST
+#define BOARD_USB_PRODUCT_ID	USB_PRODUCT_SIMTRACE2
 /* OpenMoko SIMtrace 2 DFU USB product ID (DFU bootloader/DFU mode) */
-#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_OCTSIMTEST
+#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_SIMTRACE2_DFU
 /* USB release number (bcdDevice, shown as 0.00) */
 #define BOARD_USB_RELEASE	0x000
 /* Indicate SIMtrace is bus power in USB attributes */
 #define BOARD_USB_BMATTRIBUTES	USBConfigurationDescriptor_BUSPOWERED_NORWAKEUP

-#define DETECT_VCC_BY_ADC
-/* we have a resistive voltage divider of 47 + 30 kOhms to also detect 5V supply power */
-#define VCC_UV_THRESH_1V8	(1500000*47)/(47+30)
-#define VCC_UV_THRESH_3V	(2500000*47)/(47+30)
-
-#define HAVE_SLOT_MUX
-
-#define HAVE_BOARD_CARDINSERT
-struct cardem_inst;
-void board_set_card_insert(struct cardem_inst *ci, bool card_insert);
-
 /** Supported modes */
 /* SIMtrace board supports sniffer mode */
 //#define HAVE_SNIFFER
 /* SIMtrace board supports CCID mode */
 //#define HAVE_CCID
 /* SIMtrace board supports card emulation mode */
-#define HAVE_CARDEM
+//#define HAVE_CARDEM
 /* SIMtrace board supports man-in-the-middle mode */
 //#define HAVE_MITM
 /* octsimtest board supports gpio_test mode */
--- a/firmware/libboard/octsimtest/include/mcp23017.h
+++ b/firmware/libboard/octsimtest/include/mcp23017.h
@@ -18,10 +18,8 @@

 #define MCP23017_ADDRESS 0x20

-int mcp23017_init(uint8_t slave, uint8_t iodira, uint8_t iodirb);
+int mcp23017_init(uint8_t slave);
 int mcp23017_test(uint8_t slave);
 int mcp23017_toggle(uint8_t slave);
-int mcp23017_set_output_a(uint8_t slave, uint8_t val);
-int mcp23017_set_output_b(uint8_t slave, uint8_t val);
 //int mcp23017_write_byte(uint8_t slave, uint8_t addr, uint8_t byte);
 //int mcp23017_read_byte(uint8_t slave, uint8_t addr);
--- a/firmware/libboard/octsimtest/include/mux.h
+++ b/firmware/libboard/octsimtest/include/mux.h
@@ -1,17 +0,0 @@
-#pragma once
-
-void mux_init(void);
-int mux_set_slot(uint8_t s);
-int mux_get_slot(void);
-void mux_set_freq(uint8_t s);
-
-/* this reflects the wiring between U5 and U4 */
-#define MUX_FREQ_DIV_2		0
-#define MUX_FREQ_DIV_4		1
-#define MUX_FREQ_DIV_16		2
-#define MUX_FREQ_DIV_32		3
-#define MUX_FREQ_DIV_32		3
-#define MUX_FREQ_DIV_128	4
-#define MUX_FREQ_DIV_512	5
-#define MUX_FREQ_DIV_2048	6
-#define MUX_FREQ_DIV_4096	7
--- a/firmware/libboard/octsimtest/source/board_octsimtest.c
+++ b/firmware/libboard/octsimtest/source/board_octsimtest.c
@@ -17,7 +17,6 @@
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
 */
-#include <stdbool.h>
 #include "board.h"
 #include "simtrace.h"
 #include "utils.h"
@@ -26,29 +25,16 @@
 #include "usb_buf.h"
 #include "i2c.h"
 #include "mcp23017.h"
-#include "mux.h"
-
-static bool mcp2317_present = false;

 void board_exec_dbg_cmd(int ch)
 {
 	switch (ch) {
 	case '?':
 		printf("\t?\thelp\n\r");
-		printf("\t0-8\tselect physical SIM slot\n\r");
 		printf("\tR\treset SAM3\n\r");
 		printf("\tm\trun mcp23017 test\n\r");
-		printf("\ti\tset card insert via I2C\n\r");
-		printf("\tI\tdisable card insert\n\r");
+		printf("\tR\ttoggle MSB of gpio on mcp23017\n\r");
 		break;
-	case '0': mux_set_slot(0); break;
-	case '1': mux_set_slot(1); break;
-	case '2': mux_set_slot(2); break;
-	case '3': mux_set_slot(3); break;
-	case '4': mux_set_slot(4); break;
-	case '5': mux_set_slot(5); break;
-	case '6': mux_set_slot(6); break;
-	case '7': mux_set_slot(7); break;
 	case 'R':
 		printf("Asking NVIC to reset us\n\r");
 		USBD_Disconnect();
@@ -57,13 +43,8 @@ void board_exec_dbg_cmd(int ch)
 	case 'm':
 		mcp23017_test(MCP23017_ADDRESS);
 		break;
-	case 'i':
-		printf("Setting card insert (slot=%u)\r\n", mux_get_slot());
-		mcp23017_set_output_a(MCP23017_ADDRESS, (1 << mux_get_slot()));
-		break;
-	case 'I':
-		printf("Releasing card insert (slot=%u)\r\n", mux_get_slot());
-		mcp23017_set_output_a(MCP23017_ADDRESS, 0);
+	case 't':
+		mcp23017_toggle(MCP23017_ADDRESS);
 		break;
 	default:
 		printf("Unknown command '%c'\n\r", ch);
@@ -76,13 +57,9 @@ void board_main_top(void)
 #ifndef APPLICATION_dfu
 	usb_buf_init();

-	mux_init();
 	i2c_pin_init();
-	/* PORT A: all outputs, Port B0 output, B1..B7 unused */
-	if (mcp23017_init(MCP23017_ADDRESS, 0x00, 0xfe) == 0) {
-		mcp2317_present = true;
-		mcp23017_set_output_a(MCP23017_ADDRESS, 0);
-	}
+	if (!mcp23017_init(MCP23017_ADDRESS))
+		printf("mcp23017 not found!\n\r");
 	/* Initialize checking for card insert/remove events */
 	//card_present_init();
 #endif
@@ -102,23 +79,3 @@ int board_override_enter_dfu(void)
 	} else
 		return 0;
 }
-
-void board_set_card_insert(struct cardem_inst *ci, bool card_insert)
-{
-	int s = mux_get_slot();
-
-	/* A0 .. A7 of the MCP are each connected to the gate of a FET which closes
-	 * the sim-present signal of the respective slot */
-
-	if (mcp2317_present) {
-		if (card_insert) {
-			/* we must enable card-presence of the active slot and disable it on all others */
-			mcp23017_set_output_a(MCP23017_ADDRESS, (1 << s));
-		} else {
-			/* we disable all card insert signals */
-			mcp23017_set_output_a(MCP23017_ADDRESS, 0);
-		}
-	} else {
-		TRACE_WARNING("No MCP23017 present; cannot set CARD_INSERT\r\n");
-	}
-}
--- a/firmware/libboard/octsimtest/source/mcp23017.c
+++ b/firmware/libboard/octsimtest/source/mcp23017.c
@@ -92,25 +92,19 @@ out_stop:
 		return 0;
 }

-int mcp23017_init(uint8_t slave, uint8_t iodira, uint8_t iodirb)
+int mcp23017_init(uint8_t slave)
 {
-	TRACE_DEBUG("mcp23017_init\n\r");
-
+	printf("mcp23017_init\n\r");
 	// all gpio input
-	if (mcp23017_write_byte(slave, MCP23017_IODIRA, iodira))
-		goto out_err;
+	if (mcp23017_write_byte(slave, MCP23017_IODIRA, 0xff))
+		return false;
 	// msb of portb output, rest input
-	if (mcp23017_write_byte(slave, MCP23017_IODIRB, iodirb))
-		goto out_err;
+	if (mcp23017_write_byte(slave, MCP23017_IODIRB, 0x7f))
+		return false;
 	if (mcp23017_write_byte(slave, MCP23017_IOCONA, 0x20)) //disable SEQOP (autoinc addressing)
-		goto out_err;
-
-	TRACE_DEBUG("mcp23017 found\n\r");
-	return 0;
-
-out_err:
-	TRACE_WARNING("mcp23017 NOT found!\n\r");
-	return -1;
+		return false;
+	printf("mcp23017 found\n\r");
+	return true;
 }

 int mcp23017_test(uint8_t slave)
@@ -126,16 +120,6 @@ int mcp23017_test(uint8_t slave)
 	return 0;
 }

-int mcp23017_set_output_a(uint8_t slave, uint8_t val)
-{
-	return mcp23017_write_byte(slave, MCP23017_OLATA, val);
-}
-
-int mcp23017_set_output_b(uint8_t slave, uint8_t val)
-{
-	return mcp23017_write_byte(slave, MCP23017_OLATB, val);
-}
-
 int mcp23017_toggle(uint8_t slave)
 {
 	// example writing MSB of gpio
--- a/firmware/libboard/octsimtest/source/mux.c
+++ b/firmware/libboard/octsimtest/source/mux.c
@@ -1,113 +0,0 @@
-/* sysmoOCTSIMTEST support for multiplexers
- *
- * (C) 2021 by Harald Welte <laforge@gnumonks.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-
-#include "board.h"
-#include "mux.h"
-#include <stdbool.h>
-#include <errno.h>
-
-/* 3-bit S0..S2 signal for slot selection */
-static const Pin pin_in_sel[3] = {
-	{ PIO_PA1, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
-	{ PIO_PA2, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
-	{ PIO_PA3, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
-};
-
-/* 3-bit S0..S2 signal for frequency divider selection */
-static const Pin pin_freq_sel[3] = {
-	{ PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
-	{ PIO_PA17, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
-	{ PIO_PA18, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
-};
-
-/* low-active output enable for all muxes */
-static const Pin pin_oe = { PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT };
-
-static uint8_t g_mux_slot = 0;
-
-/* initialize the external 1:8 multiplexers */
-void mux_init(void)
-{
-	PIO_Configure(&pin_oe, PIO_LISTSIZE(pin_oe));
-	PIO_Configure(pin_in_sel, PIO_LISTSIZE(pin_in_sel));
-	PIO_Configure(pin_freq_sel, PIO_LISTSIZE(pin_freq_sel));
-
-	mux_set_slot(0);
-}
-
-/* set the slot selection mux */
-int mux_set_slot(uint8_t s)
-{
-	TRACE_INFO("%s(%u)\r\n", __func__, s);
-
-	if (s > 7)
-		return -EINVAL;
-
-	/* !OE = H: disconnect input and output of muxes */
-	PIO_Set(&pin_oe);
-
-	if (s & 1)
-		PIO_Set(&pin_in_sel[0]);
-	else
-		PIO_Clear(&pin_in_sel[0]);
-	if (s & 2)
-		PIO_Set(&pin_in_sel[1]);
-	else
-		PIO_Clear(&pin_in_sel[1]);
-	if (s & 4)
-		PIO_Set(&pin_in_sel[2]);
-	else
-		PIO_Clear(&pin_in_sel[2]);
-
-	/* !OE = L: (re-)enable the output of muxes */
-	PIO_Clear(&pin_oe);
-
-	g_mux_slot = s;
-	return s;
-}
-
-int mux_get_slot(void)
-{
-	return g_mux_slot;
-}
-
-/* set the frequency divider mux */
-void mux_set_freq(uint8_t s)
-{
-	TRACE_INFO("%s(%u)\r\n", __func__, s);
-
-	/* no need for 'break before make' here, this would also affect
-	 * the SIM card I/O signals which we don't want to disturb */
-
-	if (s & 1)
-		PIO_Set(&pin_freq_sel[0]);
-	else
-		PIO_Clear(&pin_freq_sel[0]);
-	if (s & 2)
-		PIO_Set(&pin_freq_sel[1]);
-	else
-		PIO_Clear(&pin_freq_sel[1]);
-	if (s & 4)
-		PIO_Set(&pin_freq_sel[2]);
-	else
-		PIO_Clear(&pin_freq_sel[2]);
-
-	/* !OE = L: ensure enable the output of muxes */
-	PIO_Clear(&pin_oe);
-}
--- a/firmware/libboard/octsimtest/source/sim_switch.c
+++ b/firmware/libboard/octsimtest/source/sim_switch.c
@@ -1,37 +0,0 @@
-/* Code to switch between local (physical) and remote (emulated) SIM
- *
- * (C) 2021 by Harald Welte <hwelte@hmw-consulting.de>
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
- */
-#include "board.h"
-#include "trace.h"
-#include "sim_switch.h"
-
-int sim_switch_use_physical(unsigned int nr, int physical)
-{
-	if (physical) {
-		TRACE_ERROR("%u: Use local/physical SIM - UNSUPPORTED!\r\n", nr);
-	} else {
-		TRACE_INFO("%u: Use remote/emulated SIM\r\n", nr);
-	}
-
-	return 0;
-}
-
-int sim_switch_init(void)
-{
-	return 1; // SIMtrace hardware has only one switchable interface
-}
--- a/firmware/libboard/qmod/include/board.h
+++ b/firmware/libboard/qmod/include/board.h
@@ -109,9 +109,6 @@
 #define BOARD_USB_RELEASE	0x010

 #define CARDEMU_SECOND_UART
-
 #define DETECT_VCC_BY_ADC
-#define VCC_UV_THRESH_1V8	1500000
-#define VCC_UV_THRESH_3V	2500000

 #define HAVE_CARDEM
--- a/firmware/libboard/sam3p256/include/board.h
+++ b/firmware/libboard/sam3p256/include/board.h
@@ -135,6 +135,11 @@
 #define PIN_SPI_WP    {PA15, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
 #endif

+/** Pin configuration to control USB pull-up on D+
+ *  @details the USB pull-up on D+ is enable by default on the board but can be disabled by setting PA16 high
+ */
+#define PIN_USB_PULLUP  {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+
 /** USB definitions */
 /* OpenMoko SIMtrace 2 USB vendor ID */
 #define BOARD_USB_VENDOR_ID	USB_VENDOR_OPENMOKO
--- a/firmware/libboard/simtrace/include/board.h
+++ b/firmware/libboard/simtrace/include/board.h
@@ -40,7 +40,7 @@
 /** green LED pin definition */
 #define PIN_LED_GREEN   {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
 /** LEDs pin definition */
-#define PINS_LEDS       PIN_LED_RED, PIN_LED_GREEN
+#define PINS_LEDS       PIN_LED_RED, PIN_LED_GREEN 
 /** index for red LED in LEDs pin definition array */
 #define LED_NUM_RED     0
 /** index for green LED in LEDs pin definition array */
@@ -134,6 +134,11 @@
 /* SPI flash write protect pin (active low, pulled low) */
 #define PIN_SPI_WP    {PA15, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}

+/** Pin configuration to control USB pull-up on D+
+ *  @details the USB pull-up on D+ is enable by default on the board but can be disabled by setting PA16 high
+ */
+#define PIN_USB_PULLUP  {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+
 /** USB definitions */
 /* OpenMoko SIMtrace 2 USB vendor ID */
 #define BOARD_USB_VENDOR_ID	USB_VENDOR_OPENMOKO
@@ -148,14 +153,10 @@

 /** Supported modes */
 /* SIMtrace board supports sniffer mode */
-#ifdef APPLICATION_trace
 #define HAVE_SNIFFER
-#endif
 /* SIMtrace board supports CCID mode */
 //#define HAVE_CCID
 /* SIMtrace board supports card emulation mode */
-#ifdef APPLICATION_cardem
-#define HAVE_CARDEM
-#endif
+//#define HAVE_CARDEM
 /* SIMtrace board supports man-in-the-middle mode */
 //#define HAVE_MITM
--- a/firmware/libcommon/include/simtrace_prot.h
+++ b/firmware/libcommon/include/simtrace_prot.h
@@ -269,8 +269,6 @@ struct cardemu_usb_msg_error {
 struct cardemu_usb_msg_config {
 	/* bit-mask of CEMU_FEAT_F flags */
 	uint32_t features;
-	/* the selected slot number (if an external mux is present) */
-	uint8_t slot_mux_nr;
 } __attribute__ ((packed));

 /***********************************************************************
--- a/firmware/libcommon/include/simtrace_usb.h
+++ b/firmware/libcommon/include/simtrace_usb.h
@@ -25,8 +25,6 @@
 #define USB_PRODUCT_QMOD_SAM3		0x4004
 #define USB_PRODUCT_SIMTRACE2_DFU	0x60e3	/* was 0x60e2 */
 #define USB_PRODUCT_SIMTRACE2		0x60e3
-#define USB_PRODUCT_OCTSIMTEST		0x616d
-#define USB_PRODUCT_NGFF_CARDEM		0x616e

 /* USB proprietary class */
 #define USB_CLASS_PROPRIETARY			0xff
--- a/firmware/libcommon/source/card_emu.c
+++ b/firmware/libcommon/source/card_emu.c
@@ -33,9 +33,6 @@
 #include <osmocom/core/linuxlist.h>
 #include <osmocom/core/msgb.h>

-#ifdef HAVE_SLOT_MUX
-#include "mux.h"
-#endif

 #define NUM_SLOTS		2

@@ -922,7 +919,6 @@ static int tx_byte_tpdu(struct card_handle *ch)
 	byte = msgb_pull_u8(msg);

 	card_emu_uart_tx(ch->uart_chan, byte);
-	card_emu_uart_reset_wt(ch->uart_chan);

 	/* this must happen _after_ the byte has been transmitted */
 	switch (ch->tpdu.state) {
@@ -1083,12 +1079,6 @@ static void card_emu_report_config(struct card_handle *ch)

 	cfg = (struct cardemu_usb_msg_config *) msgb_put(msg, sizeof(*cfg));
 	cfg->features = ch->features;
-#ifdef HAVE_SLOT_MUX
-	cfg->slot_mux_nr = mux_get_slot();
-#else
-	cfg->slot_mux_nr = 0;
-#endif
-

 	usb_buf_upd_len_and_submit(msg);
 }
@@ -1251,12 +1241,6 @@ int card_emu_set_config(struct card_handle *ch, const struct cardemu_usb_msg_con
 	if (scfg_len >= sizeof(uint32_t))
 		ch->features = (scfg->features & SUPPORTED_FEATURES);

-#ifdef HAVE_SLOT_MUX
-	if (scfg_len >= sizeof(uint32_t)+sizeof(uint8_t)) {
-		mux_set_slot(scfg->slot_mux_nr);
-	}
-#endif
-
 	/* send back a report of our current configuration */
 	card_emu_report_config(ch);

--- a/firmware/libcommon/source/mode_cardemu.c
+++ b/firmware/libcommon/source/mode_cardemu.c
@@ -39,26 +39,10 @@ static const Pin pins_cardsim[] = PINS_CARDSIM;
 #endif

 /* UART pins */
-#if defined(ngff_cardem)
-static const Pin pins_usim1[]	= {PINS_USIM2};
-static const Pin pin_usim1_rst	= PIN_USIM2_nRST;
-#define FIRST_USART_BASE USART0
-#define FIRST_USART_ID ID_USART0
-#define FIRST_USART_IRQ USART0_IRQn
-#else
 static const Pin pins_usim1[]	= {PINS_USIM1};
 static const Pin pin_usim1_rst	= PIN_USIM1_nRST;
-#define FIRST_USART_BASE USART1
-#define FIRST_USART_ID ID_USART1
-#define FIRST_USART_IRQ USART1_IRQn
-#endif
 static const Pin pin_usim1_vcc	= PIN_USIM1_VCC;

-#ifdef PIN_USIM1_IO_DIR
-static const Pin pin_io_dir 	= PIN_USIM1_IO_DIR;
-#endif
-
-
 #ifdef CARDEMU_SECOND_UART
 static const Pin pins_usim2[]	= {PINS_USIM2};
 static const Pin pin_usim2_rst	= PIN_USIM2_nRST;
@@ -86,6 +70,7 @@ struct cardem_inst {
 	const Pin pin_insert;
 #ifdef DETECT_VCC_BY_ADC
 	uint32_t vcc_uv;
+	uint32_t vcc_uv_last;
 #endif
 	bool vcc_active;
 	bool vcc_active_last;
@@ -97,8 +82,8 @@ struct cardem_inst cardem_inst[] = {
 	{
 		.num = 0,
 		.usart_info = 	{
-			.base = FIRST_USART_BASE,
-			.id = FIRST_USART_ID,
+			.base = USART1,
+			.id = ID_USART1,
 			.state = USART_RCV
 		},
 		.ep_out = SIMTRACE_CARDEM_USB_EP_USIM1_DATAOUT,
@@ -158,27 +143,12 @@ void card_emu_uart_wait_tx_idle(uint8_t uart_chan)
 	wait_tx_idle(usart);
 }

-static void card_emu_uart_set_direction(uint8_t uart_chan, bool tx)
-{
-	/* only on some boards (octsimtest) we hae an external level
-	 * shifter that requires us to switch the direction between RX and TX */
-#ifdef PIN_USIM1_IO_DIR
-	if (uart_chan == 0) {
-		if (tx)
-			PIO_Set(&pin_io_dir);
-		else
-			PIO_Clear(&pin_io_dir);
-	}
-#endif
-}
-
 /* call-back from card_emu.c to enable/disable transmit and/or receive */
 void card_emu_uart_enable(uint8_t uart_chan, uint8_t rxtx)
 {
 	Usart *usart = get_usart_by_chan(uart_chan);
 	switch (rxtx) {
 	case ENABLE_TX:
-		card_emu_uart_set_direction(uart_chan, true);
 		USART_DisableIt(usart, ~(US_IER_TXRDY | US_IER_TIMEOUT));
 		/* as irritating as it is, we actually want to keep the
 		 * receiver enabled during transmit */
@@ -204,7 +174,6 @@ void card_emu_uart_enable(uint8_t uart_chan, uint8_t rxtx)
 		 * transmitter enabled during receive */
 		USART_SetTransmitterEnabled(usart, 1);
 		wait_tx_idle(usart);
-		card_emu_uart_set_direction(uart_chan, false);;
 		usart->US_CR = US_CR_RSTSTA | US_CR_RSTIT | US_CR_RSTNACK;
 		USART_EnableIt(usart, US_IER_RXRDY);
 		USART_SetReceiverEnabled(usart, 1);
@@ -265,6 +234,7 @@ static uint16_t compute_next_timeout(struct cardem_inst *ci)
 *  \param[in] inst_num Instance number, range 0..1 (some boards only '0' permitted) */
 static void usart_irq_rx(uint8_t inst_num)
 {
+	OSMO_ASSERT(inst_num < ARRAY_SIZE(cardem_inst));
 	Usart *usart = get_usart_by_chan(inst_num);
 	struct cardem_inst *ci = &cardem_inst[inst_num];
 	uint32_t csr;
@@ -420,9 +390,6 @@ void card_emu_uart_interrupt(uint8_t uart_chan)
 ***********************************************************************/

 #ifdef DETECT_VCC_BY_ADC
-#if !defined(VCC_UV_THRESH_1V8) || !defined(VCC_UV_THRESH_3V)
-#error "You must define VCC_UV_THRESH_{1V1,3V} if you use ADC VCC detection"
-#endif

 static volatile int adc_triggered = 0;
 static int adc_sam3s_reva_errata = 0;
@@ -471,16 +438,19 @@ static int card_vcc_adc_init(void)
 	return 0;
 }

+#define VCC_UV_THRESH_1V8	1500000
+#define VCC_UV_THRESH_3V	2500000
+
 static void process_vcc_adc(struct cardem_inst *ci)
 {
-#ifdef octsimtest
-	if (ci->vcc_uv >= VCC_UV_THRESH_1V8)
-#else
-	if (ci->vcc_uv >= VCC_UV_THRESH_3V)
-#endif
+	if (ci->vcc_uv >= VCC_UV_THRESH_3V &&
+	    ci->vcc_uv_last < VCC_UV_THRESH_3V) {
 		ci->vcc_active = true;
-	else
+	} else if (ci->vcc_uv < VCC_UV_THRESH_3V &&
+		 ci->vcc_uv_last >= VCC_UV_THRESH_3V) {
 		ci->vcc_active = false;
+	}
+	ci->vcc_uv_last = ci->vcc_uv;
 }

 void ADC_IrqHandler(void)
@@ -581,7 +551,7 @@ void mode_cardemu_init(void)

 	/* configure USART as ISO-7816 slave (e.g. card) */
 	ISO7816_Init(&cardem_inst[0].usart_info, CLK_SLAVE);
-	NVIC_EnableIRQ(FIRST_USART_IRQ);
+	NVIC_EnableIRQ(USART1_IRQn);
 	PIO_ConfigureIt(&pin_usim1_rst, usim1_rst_irqhandler);
 	PIO_EnableIt(&pin_usim1_rst);

@@ -639,9 +609,9 @@ void mode_cardemu_exit(void)
 	PIO_DisableIt(&pin_usim1_rst);
 	PIO_DisableIt(&pin_usim1_vcc);

-	NVIC_DisableIRQ(FIRST_USART_IRQ);
-	USART_SetTransmitterEnabled(FIRST_USART_BASE, 0);
-	USART_SetReceiverEnabled(FIRST_USART_BASE, 0);
+	NVIC_DisableIRQ(USART1_IRQn);
+	USART_SetTransmitterEnabled(USART1, 0);
+	USART_SetReceiverEnabled(USART1, 0);

 #ifdef CARDEMU_SECOND_UART
 	PIO_DisableIt(&pin_usim2_rst);
@@ -668,26 +638,6 @@ static void dispatch_usb_command_generic(struct msgb *msg, struct cardem_inst *c
 	usb_buf_free(msg);
 }

-static void process_card_insert(struct cardem_inst *ci, bool card_insert)
-{
-	TRACE_INFO("%u: set card_insert to %s\r\n", ci->num, card_insert ? "INSERTED" : "REMOVED");
-
-#ifdef HAVE_BOARD_CARDINSERT
-	board_set_card_insert(ci, card_insert);
-#else
-	if (!ci->pin_insert.pio) {
-		TRACE_INFO("%u: skipping unsupported card_insert to %s\r\n",
-			   ci->num, card_insert ? "INSERTED" : "REMOVED");
-		return;
-	}
-
-	if (card_insert)
-		PIO_Set(&ci->pin_insert);
-	else
-		PIO_Clear(&ci->pin_insert);
-#endif
-}
-
 /* handle a single USB command as received from the USB host */
 static void dispatch_usb_command_cardem(struct msgb *msg, struct cardem_inst *ci)
 {
@@ -711,7 +661,18 @@ static void dispatch_usb_command_cardem(struct msgb *msg, struct cardem_inst *ci
 		break;
 	case SIMTRACE_MSGT_DT_CEMU_CARDINSERT:
 		cardins = (struct cardemu_usb_msg_cardinsert *) msg->l2h;
-		process_card_insert(ci, cardins->card_insert);
+		if (!ci->pin_insert.pio) {
+			TRACE_INFO("%u: skipping unsupported card_insert to %s\r\n",
+				   ci->num, cardins->card_insert ? "INSERTED" : "REMOVED");
+			usb_buf_free(msg);
+			break;
+		}
+		TRACE_INFO("%u: set card_insert to %s\r\n", ci->num,
+			   cardins->card_insert ? "INSERTED" : "REMOVED");
+		if (cardins->card_insert)
+			PIO_Set(&ci->pin_insert);
+		else
+			PIO_Clear(&ci->pin_insert);
 		usb_buf_free(msg);
 		break;
 	case SIMTRACE_MSGT_BD_CEMU_STATUS:
@@ -721,7 +682,6 @@ static void dispatch_usb_command_cardem(struct msgb *msg, struct cardem_inst *ci
 	case SIMTRACE_MSGT_BD_CEMU_CONFIG:
 		cfg = (struct cardemu_usb_msg_config *) msg->l2h;
 		card_emu_set_config(ci->ch, cfg, msgb_l2len(msg));
-		usb_buf_free(msg);
 		break;
 	case SIMTRACE_MSGT_BD_CEMU_STATS:
 	default:
--- a/firmware/libcommon/source/usb.c
+++ b/firmware/libcommon/source/usb.c
@@ -689,8 +689,16 @@ void SIMtrace_USB_Initialize(void)
 {
 	unsigned int i;
 	/* Signal USB reset by disabling the pull-up on USB D+ for at least 10 ms */
+#ifdef PIN_USB_PULLUP
+	const Pin usb_dp_pullup = PIN_USB_PULLUP;
+	PIO_Configure(&usb_dp_pullup, 1);
+	PIO_Set(&usb_dp_pullup);
+#endif
 	USBD_HAL_Suspend();
-	mdelay(500);
+	mdelay(20);
+#ifdef PIN_USB_PULLUP
+	PIO_Clear(&usb_dp_pullup);
+#endif
 	USBD_HAL_Activate();

 	// Get std USB driver
--- a/firmware/test/card_emu_tests.c
+++ b/firmware/test/card_emu_tests.c
@@ -13,20 +13,6 @@
 #define PHONE_INT	2
 #define PHONE_DATAOUT	3

-/* stub for stdio */
-signed int printf_sync(const char *pFormat, ...)
-{
-	va_list ap;
-	signed int result;
-
-	va_start(ap, pFormat);
-	result = vprintf(pFormat, ap);
-	va_end(ap);
-
-	return result;
-}
-
-
 /***********************************************************************
 * stub functions required by card_emu.c
 ***********************************************************************/
@@ -64,9 +50,6 @@ void card_emu_uart_enable(uint8_t uart_chan, uint8_t rxtx)
 	case ENABLE_TX:
 		rts = "TX";
 		break;
-	case ENABLE_TX_TIMER_ONLY:
-		rts = "TX-TIMER-ONLY";
-		break;
 	case ENABLE_RX:
 		rts = "RX";
 		break;
@@ -83,14 +66,29 @@ void card_emu_uart_interrupt(uint8_t uart_chan)
 	printf("uart_interrupt(uart_chan=%u)\n", uart_chan);
 }

-void card_emu_uart_update_wt(uint8_t uart_chan, uint32_t wt)
+void tc_etu_set_wtime(uint8_t tc_chan, uint16_t wtime)
 {
-	printf("%s(uart_chan=%u, wtime=%u)\n", __func__, uart_chan, wt);
+	printf("tc_etu_set_wtime(tc_chan=%u, wtime=%u)\n", tc_chan, wtime);
 }

-void card_emu_uart_reset_wt(uint8_t uart_chan)
+void tc_etu_set_etu(uint8_t tc_chan, uint16_t etu)
 {
-	printf("%s(uart_chan=%u\n", __func__, uart_chan);
+	printf("tc_etu_set_etu(tc_chan=%u, etu=%u)\n", tc_chan, etu);
+}
+
+void tc_etu_init(uint8_t chan_nr, void *handle)
+{
+	printf("tc_etu_init(tc_chan=%u)\n", chan_nr);
+}
+
+void tc_etu_enable(uint8_t chan_nr)
+{
+	printf("tc_etu_enable(tc_chan=%u)\n", chan_nr);
+}
+
+void tc_etu_disable(uint8_t chan_nr)
+{
+	printf("tc_etu_disable(tc_chan=%u)\n", chan_nr);
 }


@@ -138,7 +136,7 @@ static void io_start_card(struct card_handle *ch)
 	/* release from reset and verify th ATR */
 	card_emu_io_statechg(ch, CARD_IO_RST, 0);
 	/* simulate waiting time before ATR expired */
-	card_emu_wtime_expired(ch);
+	tc_etu_wtime_expired(ch);
 	verify_atr(ch);
 }

@@ -410,7 +408,7 @@ int main(int argc, char **argv)
 	struct card_handle *ch;
 	unsigned int i;

-	ch = card_emu_init(0, 42, PHONE_DATAIN, PHONE_INT, false, true, false);
+	ch = card_emu_init(0, 23, 42, PHONE_DATAIN, PHONE_INT, false, true, false);
 	assert(ch);

 	usb_buf_init();
--- a/hardware/board_gpio.gnumeric
+++ b/hardware/board_gpio.gnumeric
--- a/host/contrib/99-simtrace2.rules
+++ b/host/contrib/99-simtrace2.rules
@@ -16,10 +16,6 @@ ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="4002", GROUP="plugdev"
 # sysmocom QMOD SAM3 (DFU and runtime)
 ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="4003", GROUP="plugdev"
 ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="4004", GROUP="plugdev"
-# sysmocom OCTSIMTEST
-ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="616d", GROUP="plugdev"
-# ngff-cardem
-ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="616e", GROUP="plugdev"

 # All done
 LABEL="simtrace2_rules_end"
--- a/host/contrib/simtrace2.spec.in
+++ b/host/contrib/simtrace2.spec.in
@@ -84,7 +84,6 @@ find %{buildroot} -type f -name "*.la" -delete -print
 %{_bindir}/simtrace2-cardem-pcsc
 %{_bindir}/simtrace2-list
 %{_bindir}/simtrace2-sniff
-%{_bindir}/simtrace2-tool
 %{_udevrulesdir}/99-simtrace2.rules

 %files -n libosmo-simtrace2-0
--- a/host/lib/simtrace2_api.c
+++ b/host/lib/simtrace2_api.c
@@ -44,13 +44,9 @@
 #include <osmocom/core/utils.h>
 #include <osmocom/core/socket.h>
 #include <osmocom/core/msgb.h>
-#include <osmocom/core/logging.h>
 #include <osmocom/sim/class_tables.h>
 #include <osmocom/sim/sim.h>

-#define LOGSLOT(slot, lvl, fmt, args...) \
-	LOGP(DLINP, lvl, "[%u] " fmt, (slot)->slot_nr, ## args)
-
 /***********************************************************************
 * SIMTRACE core protocol
 ***********************************************************************/
@@ -145,6 +141,7 @@ int osmo_st2_slot_tx_msg(struct osmo_st2_slot *slot, struct msgb *msg,
 	OSMO_ASSERT(transp);

 	st_push_hdr(msg, msg_class, msg_type, slot->slot_nr);
+	printf("SIMtrace <- %s\n", msgb_hexdump(msg));

 	if (transp->udp_fd < 0) {
 		if (transp->usb_async)
@@ -169,8 +166,6 @@ int osmo_st2_cardem_request_card_insert(struct osmo_st2_cardem_inst *ci, bool in
 	struct msgb *msg = st_msgb_alloc();
 	struct cardemu_usb_msg_cardinsert *cins;

-	LOGSLOT(ci->slot, LOGL_NOTICE, "<= %s(inserted=%d)\n", __func__, inserted);
-
 	cins = (struct cardemu_usb_msg_cardinsert *) msgb_put(msg, sizeof(*cins));
 	memset(cins, 0, sizeof(*cins));
 	if (inserted)
@@ -186,7 +181,7 @@ int osmo_st2_cardem_request_pb_and_rx(struct osmo_st2_cardem_inst *ci, uint8_t p
 	struct cardemu_usb_msg_tx_data *txd;
 	txd = (struct cardemu_usb_msg_tx_data *) msgb_put(msg, sizeof(*txd));

-	LOGSLOT(ci->slot, LOGL_DEBUG, "<= %s(pb=%02x, le=%u)\n", __func__, pb, le);
+	printf("<= %s(%02x, %d)\n", __func__, pb, le);

 	memset(txd, 0, sizeof(*txd));
 	txd->data_len = 1;
@@ -207,7 +202,7 @@ int osmo_st2_cardem_request_pb_and_tx(struct osmo_st2_cardem_inst *ci, uint8_t p

 	txd = (struct cardemu_usb_msg_tx_data *) msgb_put(msg, sizeof(*txd));

-	LOGSLOT(ci->slot, LOGL_DEBUG, "<= %s(pb=%02x, tx=%s, len=%d)\n", __func__, pb,
+	printf("<= %s(%02x, %s, %d)\n", __func__, pb,
 		osmo_hexdump(data, data_len_in), data_len_in);

 	memset(txd, 0, sizeof(*txd));
@@ -231,7 +226,7 @@ int osmo_st2_cardem_request_sw_tx(struct osmo_st2_cardem_inst *ci, const uint8_t

 	txd = (struct cardemu_usb_msg_tx_data *) msgb_put(msg, sizeof(*txd));

-	LOGSLOT(ci->slot, LOGL_DEBUG, "<= %s(sw=%02x%02x)\n", __func__, sw[0], sw[1]);
+	printf("<= %s(%02x %02x)\n", __func__, sw[0], sw[1]);

 	memset(txd, 0, sizeof(*txd));
 	txd->data_len = 2;
@@ -251,7 +246,7 @@ int osmo_st2_cardem_request_set_atr(struct osmo_st2_cardem_inst *ci, const uint8

 	satr = (struct cardemu_usb_msg_set_atr *) msgb_put(msg, sizeof(*satr));

-	LOGSLOT(ci->slot, LOGL_NOTICE, "<= %s(%s)\n", __func__, osmo_hexdump(atr, atr_len));
+	printf("<= %s(%s)\n", __func__, osmo_hexdump(atr, atr_len));

 	memset(satr, 0, sizeof(*satr));
 	satr->atr_len = atr_len;
@@ -268,7 +263,7 @@ int osmo_st2_cardem_request_config(struct osmo_st2_cardem_inst *ci, uint32_t fea

 	cfg = (struct cardemu_usb_msg_config *) msgb_put(msg, sizeof(*cfg));

-	LOGSLOT(ci->slot, LOGL_NOTICE, "<= %s(features=%08x)\n", __func__, features);
+	printf("<= %s(%08x)\n", __func__, features);

 	memset(cfg, 0, sizeof(*cfg));
 	cfg->features = features;
@@ -285,9 +280,6 @@ static int _modem_reset(struct osmo_st2_slot *slot, uint8_t asserted, uint16_t p
 	struct msgb *msg = st_msgb_alloc();
 	struct st_modem_reset *sr ;

-	LOGSLOT(slot, LOGL_NOTICE, "<= %s(asserted=%u, pulse_ms=%u)\n", __func__,
-		asserted, pulse_ms);
-
 	sr = (struct st_modem_reset *) msgb_put(msg, sizeof(*sr));
 	sr->asserted = asserted;
 	sr->pulse_duration_msec = pulse_ms;
@@ -318,8 +310,6 @@ static int _modem_sim_select(struct osmo_st2_slot *slot, uint8_t remote_sim)
 	struct msgb *msg = st_msgb_alloc();
 	struct st_modem_sim_select *ss;

-	LOGSLOT(slot, LOGL_NOTICE, "<= %s(remote_sim=%u)\n", __func__, remote_sim);
-
 	ss = (struct st_modem_sim_select *) msgb_put(msg, sizeof(*ss));
 	ss->remote_sim = remote_sim;

--- a/host/lib/usb_util.c
+++ b/host/lib/usb_util.c
@@ -32,7 +32,5 @@ const struct dev_id osmo_st2_compatible_dev_ids[] = {
 	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_OWHW_SAM3 },
 	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_QMOD_SAM3 },
 	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_SIMTRACE2 },
-	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_OCTSIMTEST },
-	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_NGFF_CARDEM },
 	{ 0, 0 }
 };
--- a/host/src/Makefile.am
+++ b/host/src/Makefile.am
@@ -5,12 +5,10 @@ AM_LDFLAGS=$(COVERAGE_LDFLAGS)
 LDADD= $(top_builddir)/lib/libosmo-simtrace2.la \
       $(LIBOSMOCORE_LIBS) $(LIBOSMOSIM_LIBS) $(LIBOSMOUSB_LIBS) $(LIBUSB_LIBS)

-bin_PROGRAMS = simtrace2-cardem-pcsc simtrace2-list simtrace2-sniff simtrace2-tool
+bin_PROGRAMS = simtrace2-cardem-pcsc simtrace2-list simtrace2-sniff

 simtrace2_cardem_pcsc_SOURCES = simtrace2-cardem-pcsc.c

 simtrace2_list_SOURCES = simtrace2_usb.c

 simtrace2_sniff_SOURCES = simtrace2-sniff.c
-
-simtrace2_tool_SOURCES = simtrace2-tool.c
--- a/host/src/simtrace2-cardem-pcsc.c
+++ b/host/src/simtrace2-cardem-pcsc.c
@@ -1,7 +1,7 @@
 /* simtrace2-cardem-pcsc - main program for the host PC to provide a remote SIM
 * using the SIMtrace 2 firmware in card emulation mode
 *
- * (C) 2016-2021 by Harald Welte <hwelte@hmw-consulting.de>
+ * (C) 2016-2020 by Harald Welte <hwelte@hmw-consulting.de>
 * (C) 2018, sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
 *
 * This program is free software; you can redistribute it and/or
@@ -48,13 +48,32 @@
 #include <osmocom/core/socket.h>
 #include <osmocom/core/msgb.h>
 #include <osmocom/core/select.h>
-#include <osmocom/core/logging.h>
-#include <osmocom/core/application.h>
 #include <osmocom/sim/class_tables.h>
 #include <osmocom/sim/sim.h>

+#define ATR_MAX_LEN 33
+
 #define LOGCI(ci, lvl, fmt, args ...) printf(fmt, ## args)

+/* reasonable ATR offering all protocols and voltages
+ * smartphones might not care, but other readers do
+ *
+ * TS =		0x3B	Direct Convention
+ * T0 =		0x80	Y(1): b1000, K: 0 (historical bytes)
+ * TD(1) =	0x80	Y(i+1) = b1000, Protocol T=0
+ * ----
+ * TD(2) =	0x81	Y(i+1) = b1000, Protocol T=1
+ * ----
+ * TD(3) =	0x1F	Y(i+1) = b0001, Protocol T=15
+ * ----
+ * TA(4) =	0xC7	Clock stop: no preference - Class accepted by the card: (3G) A 5V B 3V C 1.8V
+ * ----
+ * Historical bytes
+ * TCK =	0x59 	correct checksum
+ */
+#define DEFAULT_ATR_STR "3B8080811FC759"
+
+
 static void atr_update_csum(uint8_t *atr, unsigned int atr_len)
 {
 	uint8_t csum = 0;
@@ -66,37 +85,6 @@ static void atr_update_csum(uint8_t *atr, unsigned int atr_len)
 	atr[atr_len-1] = csum;
 }

-static void cemu_flags2str(char *out, unsigned int out_len, uint32_t flags)
-{
-	snprintf(out, out_len, "%s%s%s%s%s",
-		 flags & CEMU_STATUS_F_RESET_ACTIVE ? "RESET " : "",
-		 flags & CEMU_STATUS_F_VCC_PRESENT ? "VCC " : "",
-		 flags & CEMU_STATUS_F_CLK_ACTIVE ? "CLK " : "",
-		 flags & CEMU_STATUS_F_CARD_INSERT ? "CARD_PRES " : "",
-		 flags & CEMU_STATUS_F_RCEMU_ACTIVE ? "RCEMU " : "");
-}
-
-static uint32_t last_flags = 0;
-
-static void update_flags(struct osmo_st2_cardem_inst *ci, uint32_t flags)
-{
-	struct osim_card_hdl *card = ci->chan->card;
-
-	if ((flags & CEMU_STATUS_F_VCC_PRESENT) && (flags & CEMU_STATUS_F_CLK_ACTIVE) &&
-	    !(flags & CEMU_STATUS_F_RESET_ACTIVE)) {
-		if (last_flags & CEMU_STATUS_F_RESET_ACTIVE) {
-			/* a reset has just ended, forward it to the real card */
-			bool cold_reset = true;
-			if (last_flags & CEMU_STATUS_F_VCC_PRESENT)
-				cold_reset = false;
-			LOGCI(ci, LOGL_NOTICE, "%s Resetting card in reader...\n",
-				cold_reset ? "Cold" : "Warm");
-			osim_card_reset(card, cold_reset);
-		}
-	}
-	last_flags = flags;
-}
-
 /***********************************************************************
 * Incoming Messages
 ***********************************************************************/
@@ -104,15 +92,12 @@ static void update_flags(struct osmo_st2_cardem_inst *ci, uint32_t flags)
 /*! \brief Process a STATUS message from the SIMtrace2 */
 static int process_do_status(struct osmo_st2_cardem_inst *ci, uint8_t *buf, int len)
 {
-	struct cardemu_usb_msg_status *status = (struct cardemu_usb_msg_status *) buf;
-	char fbuf[80];
+	struct cardemu_usb_msg_status *status;
+	status = (struct cardemu_usb_msg_status *) buf;

-	cemu_flags2str(fbuf, sizeof(fbuf), status->flags);
-	printf("=> STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u (%s)\n",
+	printf("=> STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u\n",
 		status->flags, status->fi, status->di, status->wi,
-		status->waiting_time, fbuf);
-
-	update_flags(ci, status->flags);
+		status->waiting_time);

 	return 0;
 }
@@ -199,7 +184,6 @@ static int process_usb_msg(struct osmo_st2_cardem_inst *ci, uint8_t *buf, int le
 		break;
 	case SIMTRACE_MSGT_BD_CEMU_CONFIG:
 		/* firmware confirms configuration change; ignore */
-		rc = 0;
 		break;
 	default:
 		printf("unknown simtrace msg type 0x%02x\n", sh->msg_type);
@@ -214,14 +198,10 @@ static int process_usb_msg(struct osmo_st2_cardem_inst *ci, uint8_t *buf, int le
 static int process_irq_status(struct osmo_st2_cardem_inst *ci, const uint8_t *buf, int len)
 {
 	const struct cardemu_usb_msg_status *status = (struct cardemu_usb_msg_status *) buf;
-	char fbuf[80];

-	cemu_flags2str(fbuf, sizeof(fbuf), status->flags);
-	LOGCI(ci, LOGL_INFO, "SIMtrace IRQ STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u (%s)\n",
+	LOGCI(ci, LOGL_INFO, "SIMtrace IRQ STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u\n",
 		status->flags, status->fi, status->di, status->wi,
-		status->waiting_time, fbuf);
-
-	update_flags(ci, status->flags);
+		status->waiting_time);

 	return 0;
 }
@@ -421,7 +401,6 @@ static void signal_handler(int signal)
 	switch (signal) {
 	case SIGINT:
 		osmo_st2_cardem_request_card_insert(ci, false);
-		osmo_st2_modem_sim_select_local(ci->slot);
 		exit(0);
 		break;
 	default:
@@ -429,8 +408,6 @@ static void signal_handler(int signal)
 	}
 }

-static struct log_info log_info = {};
-
 int main(int argc, char **argv)
 {
 	struct osmo_st2_transport *transp = ci->slot->transp;
@@ -438,9 +415,9 @@ int main(int argc, char **argv)
 	int rc;
 	int c, ret = 1;
 	int skip_atr = 0;
-	char *atr = NULL;
-	uint8_t override_atr[OSIM_MAX_ATR_LEN];
-	int override_atr_len = 0;
+	char *atr = DEFAULT_ATR_STR;
+	uint8_t real_atr[ATR_MAX_LEN];
+	int atr_len;
 	int keep_running = 0;
 	int if_num = 0, vendor_id = -1, product_id = -1;
 	int config_id = -1, altsetting = 0, addr = -1;
@@ -457,8 +434,6 @@ int main(int argc, char **argv)
 		return rc;
 	}

-	osmo_init_logging2(NULL, &log_info);
-
 	while (1) {
 		int option_index = 0;

@@ -509,13 +484,11 @@ int main(int argc, char **argv)
 		}
 	}

-	if (atr) {
-		override_atr_len = osmo_hexparse(atr, override_atr, sizeof(override_atr));
-		if (override_atr_len < 2) {
-			fprintf(stderr, "Invalid ATR - please omit a leading 0x and only use valid hex "
-				"digits and whitespace. ATRs need to be between 2 and 33 bytes long.\n");
-			goto do_exit;
-		}
+	atr_len = osmo_hexparse(atr,real_atr,ATR_MAX_LEN);
+	if (atr_len < 2) {
+		fprintf(stderr, "Invalid ATR - please omit a leading 0x and only use valid hex "
+			"digits and whitespace. ATRs need to be between 2 and 33 bytes long.\n");
+		goto do_exit;
 	}

 	if (vendor_id < 0 || product_id < 0) {
@@ -525,6 +498,12 @@ int main(int argc, char **argv)

 	ci->card_prof = &osim_uicc_sim_cic_profile;

+	rc = libusb_init(NULL);
+	if (rc < 0) {
+		fprintf(stderr, "libusb initialization failed\n");
+		goto do_exit;
+	}
+
 	rc = osmo_st2_gsmtap_init(gsmtap_host);
 	if (rc < 0) {
 		perror("unable to open GSMTAP");
@@ -566,20 +545,20 @@ int main(int argc, char **argv)
 		transp->usb_devh = osmo_libusb_open_claim_interface(NULL, NULL, ifm);
 		if (!transp->usb_devh) {
 			fprintf(stderr, "can't open USB device\n");
-			goto close;
+			goto close_exit;
 		}

 		rc = libusb_claim_interface(transp->usb_devh, if_num);
 		if (rc < 0) {
 			fprintf(stderr, "can't claim interface %d; rc=%d\n", if_num, rc);
-			goto close;
+			goto close_exit;
 		}

 		rc = osmo_libusb_get_ep_addrs(transp->usb_devh, if_num, &transp->usb_ep.out,
 				      &transp->usb_ep.in, &transp->usb_ep.irq_in);
 		if (rc < 0) {
 			fprintf(stderr, "can't obtain EP addrs; rc=%d\n", rc);
-			goto close;
+			goto close_exit;
 		}

 		allocate_and_submit_irq(ci);
@@ -597,14 +576,8 @@ int main(int argc, char **argv)

 		if (!skip_atr) {
 			/* set the ATR */
-			if (override_atr_len) {
-				/* user has specified an override-ATR */
-				atr_update_csum(override_atr, override_atr_len);
-				osmo_st2_cardem_request_set_atr(ci, override_atr, override_atr_len);
-			} else {
-				/* use the real ATR of the card */
-				osmo_st2_cardem_request_set_atr(ci, card->atr, card->atr_len);
-			}
+			atr_update_csum(real_atr, atr_len);
+			osmo_st2_cardem_request_set_atr(ci, real_atr, atr_len);
 		}

 		/* select remote (forwarded) SIM */
@@ -614,21 +587,14 @@ int main(int argc, char **argv)
 		ret = 0;

 		libusb_release_interface(transp->usb_devh, 0);
-
-close:
-		if (transp->usb_devh) {
+close_exit:
+		if (transp->usb_devh)
 			libusb_close(transp->usb_devh);
-			transp->usb_devh = NULL;
-		}
 		if (keep_running)
 			sleep(1);
 	} while (keep_running);

-close_exit:
-	if (transp->usb_devh)
-		libusb_close(transp->usb_devh);
-
-	osmo_libusb_exit(NULL);
+	libusb_exit(NULL);
 do_exit:
 	return ret;
 }
--- a/host/src/simtrace2-sniff.c
+++ b/host/src/simtrace2-sniff.c
@@ -315,7 +315,6 @@ static const struct option opts[] = {
 /* Known USB device with SIMtrace firmware supporting sniffer */
 static const struct dev_id compatible_dev_ids[] = {
 	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_SIMTRACE2 },
-	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_NGFF_CARDEM },
 	{ 0, 0 }
 };

@@ -379,7 +378,7 @@ int main(int argc, char **argv)
 	}

 	/* Scan for available SIMtrace USB devices supporting sniffing */
-	rc = osmo_libusb_init(NULL);
+	rc = libusb_init(NULL);
 	if (rc < 0) {
 		fprintf(stderr, "libusb initialization failed\n");
 		goto do_exit;
@@ -505,7 +504,7 @@ close_exit:
 			sleep(1);
 	} while (keep_running);

-	osmo_libusb_exit(NULL);
+	libusb_exit(NULL);
 do_exit:
 	return ret;
 }
--- a/host/src/simtrace2-tool.c
+++ b/host/src/simtrace2-tool.c
@@ -1,337 +0,0 @@
-/* simtrace2-tool - main program for the host PC to provide a remote SIM
- * using the SIMtrace 2 firmware in card emulation mode
- *
- * (C) 2019 by Harald Welte <hwelte@hmw-consulting.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <errno.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdint.h>
-#include <signal.h>
-#define _GNU_SOURCE
-#include <getopt.h>
-
-#include <sys/types.h>
-
-#include <libusb.h>
-
-#include <osmocom/usb/libusb.h>
-#include <osmocom/simtrace2/simtrace2_api.h>
-#include <osmocom/simtrace2/simtrace_prot.h>
-#include <osmocom/simtrace2/gsmtap.h>
-
-#include <osmocom/core/utils.h>
-#include <osmocom/core/msgb.h>
-#include <osmocom/core/logging.h>
-#include <osmocom/core/application.h>
-
-/***********************************************************************
- * Incoming Messages
- ***********************************************************************/
-
-static void print_welcome(void)
-{
-	printf("simtrace2-tool\n"
-	       "(C) 2019 Harald Welte <laforge@gnumonks.org>\n");
-}
-
-static void print_help(void)
-{
-	printf( "simtrace2-tool [OPTIONS] COMMAND\n\n");
-	printf( "Options:\n"
-		"\t-h\t--help\n"
-		"\t-V\t--usb-vendor\tVENDOR_ID\n"
-		"\t-P\t--usb-product\tPRODUCT_ID\n"
-		"\t-C\t--usb-config\tCONFIG_ID\n"
-		"\t-I\t--usb-interface\tINTERFACE_ID\n"
-		"\t-S\t--usb-altsetting ALTSETTING_ID\n"
-		"\t-A\t--usb-address\tADDRESS\n"
-		"\t-H\t--usb-path\tPATH\n"
-		"\n"
-		);
-	printf( "Commands:\n"
-		"\tmodem reset (enable|disable|cycle)\n"
-		"\tmodem sim-switch (local|remote)\n"
-		"\n");
-}
-
-static const struct option opts[] = {
-	{ "help", 0, 0, 'h' },
-	{ "usb-vendor", 1, 0, 'V' },
-	{ "usb-product", 1, 0, 'P' },
-	{ "usb-config", 1, 0, 'C' },
-	{ "usb-interface", 1, 0, 'I' },
-	{ "usb-altsetting", 1, 0, 'S' },
-	{ "usb-address", 1, 0, 'A' },
-	{ "usb-path", 1, 0, 'H' },
-	{ NULL, 0, 0, 0 }
-};
-
-static void run_mainloop(struct osmo_st2_cardem_inst *ci)
-{
-	struct osmo_st2_transport *transp = ci->slot->transp;
-	uint8_t buf[16*265];
-	int xfer_len;
-	int rc;
-
-	while (1) {
-		/* read data from SIMtrace2 device */
-		rc = libusb_bulk_transfer(transp->usb_devh, transp->usb_ep.in,
-					  buf, sizeof(buf), &xfer_len, 100);
-		if (rc < 0 && rc != LIBUSB_ERROR_TIMEOUT &&
-			      rc != LIBUSB_ERROR_INTERRUPTED &&
-			      rc != LIBUSB_ERROR_IO) {
-			fprintf(stderr, "BULK IN transfer error; rc=%d\n", rc);
-			return;
-		}
-		/* break the loop if no new messages arrive within 100ms */
-		if (rc == LIBUSB_ERROR_TIMEOUT)
-			return;
-	}
-}
-
-static struct osmo_st2_transport _transp;
-
-static struct osmo_st2_slot _slot = {
-	.transp = &_transp,
-	.slot_nr = 0,
-};
-
-struct osmo_st2_cardem_inst _ci = {
-	.slot = &_slot,
-};
-
-struct osmo_st2_cardem_inst *ci = &_ci;
-
-/* perform a modem reset */
-static int do_modem_reset(int argc, char **argv)
-{
-	char *command;
-	if (argc < 1)
-		command = "cycle";
-	else {
-		command = argv[0];
-		argc--;
-		argv++;
-	}
-
-	if (!strcmp(command, "enable")) {
-		printf("Activating Modem RESET\n");
-		return osmo_st2_modem_reset_active(ci->slot);
-	} else if (!strcmp(command, "disable")) {
-		printf("Deactivating Modem RESET\n");
-		return osmo_st2_modem_reset_inactive(ci->slot);
-	} else if (!strcmp(command, "cycle")) {
-		printf("Pulsing Modem RESET (1s)\n");
-		return osmo_st2_modem_reset_pulse(ci->slot, 1000);
-	} else {
-		fprintf(stderr, "Unsupported modem reset command: '%s'\n", command);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/* switch between local and remote (emulated) SIM */
-static int do_modem_sim_switch(int argc, char **argv)
-{
-	char *command;
-	if (argc < 1)
-		return -EINVAL;
-	command = argv[0];
-	argc--;
-	argv++;
-
-	if (!strcmp(command, "local")) {
-		printf("Setting SIM=LOCAL; Modem reset recommended\n");
-		return osmo_st2_modem_sim_select_local(ci->slot);
-	} else if (!strcmp(command, "remote")) {
-		printf("Setting SIM=REMOTE; Modem reset recommended\n");
-		return osmo_st2_modem_sim_select_remote(ci->slot);
-	} else {
-		fprintf(stderr, "Unsupported modem sim-switch command: '%s'\n", command);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int do_subsys_modem(int argc, char **argv)
-{
-	char *command;
-	int rc;
-
-	if (argc < 1)
-		return -EINVAL;
-	command = argv[0];
-	argc--;
-	argv++;
-
-	if (!strcmp(command, "reset")) {
-		rc = do_modem_reset(argc, argv);
-	} else if (!strcmp(command, "sim-switch")) {
-		rc = do_modem_sim_switch(argc, argv);
-	} else {
-		fprintf(stderr, "Unsupported command for subsystem modem: '%s'\n", command);
-		return -EINVAL;
-	}
-
-	return rc;
-}
-
-static int do_command(int argc, char **argv)
-{
-	char *subsys;
-	int rc;
-
-	if (argc < 1)
-		return -EINVAL;
-	subsys = argv[0];
-	argc--;
-	argv++;
-
-	if (!strcmp(subsys, "modem"))
-		rc = do_subsys_modem(argc, argv);
-	else {
-		fprintf(stderr, "Unsupported subsystem '%s'\n", subsys);
-		rc = -EINVAL;
-	}
-
-	return rc;
-}
-
-static struct log_info log_info = {};
-
-int main(int argc, char **argv)
-{
-	struct osmo_st2_transport *transp = ci->slot->transp;
-	int rc;
-	int c, ret = 1;
-	int if_num = 0, vendor_id = -1, product_id = -1;
-	int config_id = -1, altsetting = 0, addr = -1;
-	char *path = NULL;
-
-	while (1) {
-		int option_index = 0;
-
-		c = getopt_long(argc, argv, "hV:P:C:I:S:A:H:", opts, &option_index);
-		if (c == -1)
-			break;
-		switch (c) {
-		case 'h':
-			print_help();
-			exit(0);
-			break;
-		case 'V':
-			vendor_id = strtol(optarg, NULL, 16);
-			break;
-		case 'P':
-			product_id = strtol(optarg, NULL, 16);
-			break;
-		case 'C':
-			config_id = atoi(optarg);
-			break;
-		case 'I':
-			if_num = atoi(optarg);
-			break;
-		case 'S':
-			altsetting = atoi(optarg);
-			break;
-		case 'A':
-			addr = atoi(optarg);
-			break;
-		case 'H':
-			path = optarg;
-			break;
-		}
-	}
-
-	if (vendor_id < 0 || product_id < 0) {
-		fprintf(stderr, "You have to specify the vendor and product ID\n");
-		goto do_exit;
-	}
-
-	transp->udp_fd = -1;
-
-	osmo_init_logging2(NULL, &log_info);
-
-	rc = osmo_libusb_init(NULL);
-	if (rc < 0) {
-		fprintf(stderr, "libusb initialization failed\n");
-		goto do_exit;
-	}
-
-	print_welcome();
-
-	do {
-		if (transp->udp_fd < 0) {
-			struct usb_interface_match _ifm, *ifm = &_ifm;
-			ifm->vendor = vendor_id;
-			ifm->product = product_id;
-			ifm->configuration = config_id;
-			ifm->interface = if_num;
-			ifm->altsetting = altsetting;
-			ifm->addr = addr;
-			if (path)
-				osmo_strlcpy(ifm->path, path, sizeof(ifm->path));
-			transp->usb_devh = osmo_libusb_open_claim_interface(NULL, NULL, ifm);
-			if (!transp->usb_devh) {
-				fprintf(stderr, "can't open USB device\n");
-				goto close_exit;
-			}
-
-			rc = osmo_libusb_get_ep_addrs(transp->usb_devh, if_num, &transp->usb_ep.out,
-					      &transp->usb_ep.in, &transp->usb_ep.irq_in);
-			if (rc < 0) {
-				fprintf(stderr, "can't obtain EP addrs; rc=%d\n", rc);
-				goto close_exit;
-			}
-		}
-
-		if (argc - optind <= 0) {
-			fprintf(stderr, "You have to specify a command to execute\n");
-			exit(1);
-		}
-
-		rc = do_command(argc-optind, argv+optind);
-		switch (rc) {
-		case 0:
-			break;
-		case -EINVAL:
-			fprintf(stderr, "Error: Invalid command/syntax\n");
-			exit(1);
-			break;
-		default:
-			fprintf(stderr, "Error executing command: %d\n", rc);
-			exit(1);
-			break;
-		}
-
-		run_mainloop(ci);
-		ret = 0;
-
-		libusb_release_interface(transp->usb_devh, 0);
-close_exit:
-		if (transp->usb_devh)
-			libusb_close(transp->usb_devh);
-	} while (0);
-
-	osmo_libusb_exit(NULL);
-do_exit:
-	return ret;
-}
--- a/host/src/simtrace2_usb.c
+++ b/host/src/simtrace2_usb.c
@@ -25,7 +25,13 @@

 #include <osmocom/usb/libusb.h>
 #include <osmocom/simtrace2/simtrace_usb.h>
-#include <osmocom/simtrace2/usb_util.h>
+
+static const struct dev_id compatible_dev_ids[] = {
+	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_OWHW_SAM3 },
+	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_QMOD_SAM3 },
+	{ USB_VENDOR_OPENMOKO, USB_PRODUCT_SIMTRACE2 },
+	{ 0, 0 }
+};

 static int find_devices(void)
 {
@@ -33,7 +39,7 @@ static int find_devices(void)
 	int rc, i, num_interfaces;

 	/* scan for USB devices matching SIMtrace USB ID with proprietary class */
-	rc = osmo_libusb_find_matching_interfaces(NULL, osmo_st2_compatible_dev_ids,
+	rc = osmo_libusb_find_matching_interfaces(NULL, compatible_dev_ids,
 						  USB_CLASS_PROPRIETARY, -1, -1, ifm, ARRAY_SIZE(ifm));
 	printf("USB matches: %d\n", rc);
 	if (rc < 0)
@@ -77,7 +83,7 @@ static int find_devices(void)

 int main(int argc, char **argv)
 {
-	osmo_libusb_init(NULL);
+	libusb_init(NULL);
 	find_devices();
 	return 0;
 }
Author	SHA1	Message	Date
Harald Welte	4d2ff9a173	assert: Use printf_sync() to ensure printing of assert / panic Change-Id: Icc202e60445d9be1cdcd61176db5ed1704d583e7	2021-04-06 02:17:39 +02:00
Kévin Redon	b6e421bcbe	card_emu: use edge-triggered VCC ADC logic Before this patch, we used to st ci->vcc_active depending on the instantaneous ADC reading of VCC. Is it > .5v, we claim VCC is active, and if it's below, VCC is inactive. With this patch we move to an edge triggered approach: Only change ci->vcc_active if the previous reading was different from the current reading. FIXME: why? Change-Id: I71b703162219484e43638f1f2f692e9dd554ef55	2021-04-06 02:17:39 +02:00
Harald Welte	e145a7aed4	card_emu: Fix computation of waiting time As we store the waiting time (WT) in 'etu', we must adjust the formula from ISO 7816-3. The 'Fi' component in the formula only exists to compute clock cycles from the etu, which we don't need here. Without this patch, the waiting time would be way too large (by a factor of 372 in the default case). Change-Id: Ia21bc7303f9b38834b5b1753983ed2a99bfc7d95	2021-04-06 02:17:39 +02:00
Harald Welte	f83c69ff69	card_emu: Fix USART timer, particularly in re-start situations The existing code started the timer once (and expired once) but didn't properly handle re-starting of the timer. Neither did it handle the 'half time expiration' case. If we want to call a function after half the WT expiring, we must of course program the hardware for half the timeout, and not the full timeout... Change-Id: Ia999d97f835c27597fcd1cf7ac78bac0ab9c98c1	2021-04-06 02:17:39 +02:00
Harald Welte	2619862fba	card_emu: Use USART timeout for waiting time Instead of using the timer/counter peripheral to handle the waiting time and corresponding timeout, the USART peripheral internal timeout mechanism is used. This is particularly important for the SIMtrace board since there (contrary to other boards) the I/O signal is not wired to a TIO pin of the timer/counter block, and hence Rx/Tx data cannot reset that timer/counter. As a result of this migration, cardem is now supported not only on owhw + qmod, but also on the simtrace board. The guts of this change have been lifted out of Change-Id Ibcb2c8cace9137695adf5fb3de43566f7cfb93b5 by Kevin Redon, which was unfortunately touching various different topics at the same time and hence was split up. Some improvements are the introduction of the ENABLE_TX_TIMER_ONLY mode, which avoids the USART interrupt handler getting hammered with TXRDY between release of RST and start of the ATR. Change-Id: Ibcb2c8cace9137695adf5fb3de43566f7cfb93b5	2021-04-06 02:17:39 +02:00
Harald Welte	deb322c36d	card_emu: explicitly initialize PTS and TPDU states Those are already initialized at various transitions of the master 7816 FSM, but let's properly initialize them at start-up, too. Change-Id: I81b2a8ef3284559164700d94717e4ccf008f53df	2021-04-06 02:17:39 +02:00
Harald Welte	351dfd65d9	card_emu: improve reset detection conditions * enter ISO_S_WAIT_RST when RST is asserted * enter ISO_S_WAIT_ATR only when we RST is released while in state ISO_S_WAIT_RST Change-Id: I620333aa8d45561a8028b948955a27f667b58406	2021-04-06 02:17:39 +02:00
Harald Welte	bc9b927569	iso7816_fidi: Add iso7816_3_ prefix to symbols; fix terminology Fi/Di are not the index into the table, but the contents of the table as resolved by Fi_index / Di_index. Let's clarify the terminology. Change-Id: If364e08e7c9a3a9707e6d54b9267c6a7c088e415	2021-04-06 02:17:39 +02:00
Harald Welte	e5c8833a97	card_emu: Clarify and differentiate F/Fi/F_index/Fi_index The ISO7816 spec terms are well-defined, let's not abuse them. We used to consider "Fi" as the "index into the table of F values", while the spec actually considers Fi as the initial value for F. Let's make sure we use the terms quite clearly: * Fi and Di are the initial values for F and D * F_index and D_index are the indexes into the ISO7816-3 Tables Furthermore, let's track Fi separately from F, as e.g. the waiting time definition only considers Fi as indicated in the ATR, despite an actually different F value might have been negotiated via PTS meanwhile. Change-Id: Ieb2425e8380a81b79df7b2bd072902994e9c3ee7	2021-04-06 02:17:39 +02:00
Harald Welte	1a32601be7	card_emu: Rename fi to Fi and di to Di As we will soon introduce the distinction between Fi and F, we should use uppercase letters, as lower-case 'f' is defined in ISO7816-3 as the frequency, which is different from the upper-case 'F'. Change-Id: Iaede621551520576e9b9af878fa46fbc88e59c2a	2021-04-06 02:17:39 +02:00
Kévin Redon	ed3067e2ea	make sim switch board specific the simtrace board uses a bus switch not used on qmod and owhw to switch the SIM between physical and virtual Change-Id: Ieaf2ed4761fc3e04f33f9aac5c04a768c9a6f71e	2021-04-06 02:17:39 +02:00
Harald Welte	841a0b70ff	card_emu: waiting_time is stored in etu, not clocks. The comment didn't reflect the source. I checked all users and the code consistently stores the waiting time in units of 'etu'. Change-Id: I2bc4a7c19cee5fb487ad639ee48ecaea706f6172	2021-04-06 02:17:39 +02:00