Harald Welte bc62335768 qmod: Disable hub reset and EEPROM erase/write by default ...

We recently introduced ALLOW_PEER_ERASE to control if the firmware
should contain code for the SAM3 to reset each other on QMOD.

Let's use the same define to also remove code for putting the USB
hub into reset as well as code for erasing + writing the hub EEPROM.

This is needed only during production, but it shouldn't be enabled
during normal operation of the product at the end user.

Change-Id: I1c8cca2f7f0f0070d7bf1ade676e035c45e4d5ab

2019-06-19 20:35:37 +02:00

..

include

set main clock for using UART at 921600 bps

2018-08-28 19:13:13 +02:00

source

qmod: Disable hub reset and EEPROM erase/write by default

2019-06-19 20:35:37 +02:00