When verify_adm is used with scripts, especially bulk provisioning, then
an exception is far more visible and allows us to spot problems with ADM
verification quicker.
Change-Id: I4162b43754efd061b6b9058b7ff8e1fc985e3538
Related: SYS#5617
The constructor gets an sl object on initalization. The card handler
will then carry out the reader operation wait_for_card().
In cases where an mechanically automated card reader is used it may
be useful to go without those operations and let the caller carry out
the appropriate reader operations. So Lets make the sl object
optional for the CardHandlerAuto class. If it is not present, simply
do not carry out the pre programmed reader operation.
Change-Id: I0f793aec51751b7c7b87d55b66326cce9970274e
Related: SYS#5617
Make sure that a reader is disconnected before connecting it. This will
efectively prevent resource leakage in the lower PCSC layers when the
reader is connected multiple times during bulk provisioning
Change-Id: I266e56f2330da25c680a76f4c0ca630a38e1f61b
There may be corner cases where an execption contains no error message.
In this case it might still be helpful to display the type of the
exeption calss to get at least an idea of what kind of error we are
dealing with.
Change-Id: I6e6b3acd17e40934050b9b088960a2f851120b26
The option and also the dest variable in the code are currently named
card_handler. This might be confusing since the variable actually refers
to a config file and therefore should be called "card_handler_config"
Change-Id: If93751e815cb46f9ff3f56b54e612d77fe1a6dfd
Almost all pySim-shell related commands are agrgated in PySimCommands.
There are a few exceptions, so there are some commands in PysimApp.
However, it makes sense to reserve PysimApp exclusively for very basic
commands that do not directly relate to card operations. So lets move
the command verify_adm and desc to PySimCommands.
Change-Id: I4a215c8a3907d69f702a70df9b85988be1ce3dbf
In OOP, we usually use capital letters for class names. The card handler
class should be no execption.
Change-Id: I4b2c06b1c607c993c9aaf0d57ad2352bb6b36e74
The variable card_handler is assigned in the following way:
card_handler = card_handler(sl)
This may cause problems since the class name and the variable name are
the same. Lets rename card_handler to avoid problems here.
Change-Id: I84dafc49862e373ae9f6a56bd2e8d1a02c27430a
There are the classes IsimCard and UsimCard, which inheret from Card,
which is the base class for a normal non ISIM/USIM simcard. Card also
has methods in it that are related to simcards, so it is not just any
"Card", it is a SimCard and should be called that way.
Change-Id: I2077ded44bc2297b8d478c5bd1895951b494efcc
The encoder/decoder functions in class EF_PCSCF look rather unfinshed
because of problems with dec_addr_tlv(), since those problems are fixed
by a previous patch we can now finish the decoder function and fix the
decoder as well.
Change-Id: I7613b8b71624dc5802aca93163788a2a2d4ca345
Related: OS#4963
The function dec_addr_tlv() takes an encoded FQDN or IPv4 address and
fromats it into a human readable string that contains the human readable
form and the encoded hex form. Unfortunately this limits the usecase of
dec_addr_tlv. Lets split the string generation into a separate function
so that we can use dec_addr_tlv universally
Change-Id: Id017b0786089adac4d6c5be688742eaa9699e529
Related: OS#4963
The method update_record as a "force_len" parameter, which is somewhat
irretatating. Some explainatory comments and a reformat of the if
statement will help to make it more understandable to the api user.
In the non force_len case the method determines the record length from
the select response and throws an exception if the data input does not
match that length. This makes sense if the data input exceeds the
record length of the file but if the data input is less then the record
length the situation is fixable by padding the input with 0xff. This
also a quite common case because in some situation it is not guaranteed
that the data will fill the entire record.
Change-Id: I9a5df0e46c3dd2e87d447c5c01cf15844b0eed07
Related: OS#4963
Even though Card, UsimCard and IsimCard are abstract classes which are
normally only used to inherit from mit may make sense to pre-populate
the name property with some meaningful value.
Change-Id: Id643e1f83718aea073e7200aecbf2db2def8652f
The encoder for EF_SPN is passing the 'spn' parameter (which is a list)
directly to enc_spn without taking it apart first.
Change-Id: I0a405793c8909d4279e634b93dcb76e5cb2963f3
Related: OS#4963
When the Access Technology Identifier encoder sets the bits for E-UTRAN
it does not respect that bit "100" is also a valid bit combination that
encodes E-UTRAN WB-S1 and E-UTRAN NB-S1. Lets encode this bit
combination if the user is just specifying "E-UTRAN" without further
spefication of WB or NB.
The decoder only looks at bit 14 and decodes "1xx" always to "E-UTRAN".
This is not specific enough. Lets make sure that the decoder is
complementary to the encoder.
Change-Id: Ibfe8883a05f9ad6988d8e212cb9a598229954296
Related: OS#4963
The function dec_xplmn_w_act(), which is also used by
format_xplmn_w_act() is using integer numbers as MCC/MNC representation.
This causes various problems since the information about leading zeros
gets lost.
Change-Id: I57f7dff80f48071ef9a3732ae1088882b127a6d4
The dec_plmn function takes an hexstring and returns the decoded MCC and
MNC as integer values. The result is then used by the json encoder in
EF_PLMNsel, which means the json output will contrary to the input, use
integer values instead of strings.
This is not correct since there may be leading zeros (e.g. mnc 01 and
001 both exist are different) which must be retained in order to know
the correct length of the MNC.
Related: OS#4963
Change-Id: I393e04836814d992d2a6d0a4e4e01850976d6e81
To prevent missunderstandings when using enc_plmn(), specify the input
and return parameters as Hexstr.
Change-Id: I57cf8e2de357650aef2a06fbffc7615ccb2a45b4
Related: OS#4963
The json input that is used with EF.MSISDN seems to be somewhat
ambigious. The original code accepts {"msisdn": "+4916012345678"}
only while the output is {"msisdn": [1, 1, "+4916012345678"]}. Lets
add a check and also accept the latter version.
Change-Id: I8f8dd68aac25d3fa3bc1aab06b855f8ec6640258
Related: OS#4963
The encoding of EF.MSISDN is a bit unstrutured. The encoder function
does not return a valid result since it lacks the parameters
Capability/Configuration2 Record Identifier and Extension5 Record
Identifier, which are mandatory but can be set to 0xFF. Also the
encoder gets its input from pySim-shell, so it should have some
more input validation, especially when the user encodes an empty
string. The encoder and decoder function also do not have unit-tests.
Since the encoder now adds the missing two bytes by isself this does
not have to be done manually anymore, so cards.py needs to be
re-aligned.
For pySim-shell.py the encoder is used from ts_51_011.py. Unfortunately
it is used wrongly there. The optional Alpha Identifier is required
here as well.
Related: OS#4963
Change-Id: Iee5369b3e3ba7fa1155facc8fa824bc60e33b55b
the helpstring of update_record_decoded mentions hex bytes for the data
parameter, but it should be mentioned as abstract json data like in
update_binary_decoded
Change-Id: Ibae2ab49054ac5dd6fcccddd28c98d886403dac9
Related: OS#4963
the export summary is printed after the log entry for the last file
without separation. This is confusing because it looks like if the
summary would refer to the last file only. Lets add a headline to make
clear that the last few lines are the "Export summary"
Change-Id: I90771e525b2b114bdb41a8e90d298ca991c09c3d
Related: OS#4963
The sysmo-usim-sja2 which is currently used for testing somewhat old. In
order to have a defined state here lets exchange it with a new card.
This will also ensure that we have a card with the most recent card
profile in the tester.
Change-Id: Ife13823d0b0a16b1f327dd882f91d0c95af65e43
When a DF is selected, then the method walk() does not catch the
related execption, which causes the command to stop immediately. Lets
also catch those exceptions and generate appropriate error messages
during export.
Change-Id: I24ccf64965e7b0756c3db77eb2084b22c357a570
Related: OS#4963
When a startup script file is specified that does not exists pySim-shell
skips the script and starts normally. This is dangerous because if
pySim-shell is called by a shellscript with a nonexisting script file
the shellscript may hang forever because there is no script that exists
pySim-shell again
Change-Id: I4ff2226c8852727aa23357aa54d1e2d480bfaf2d
Related: OS#4963
The folder pysim-testdata already contains testdata that can also be
used as examples. The .example files are from a time where the testdata
was not kept inside the repository. Since we decided to keep the test
data in the repository as well those file are redundant.
Change-Id: Iee34cad74b50755e1007506f909da9766fa8412e
The function fixup_fcp_proprietary_tlv_map() addes propritary TLV
tags in the range of d0 to ff to the TLV map. However, the spec defines
this range as b7 and b8 of the first tag byte set to 1. This results
in a range from c0 to ff. See also ETSI TS 102 221, section 11.1.1.4.6.0
Change-Id: I8359527c9ff303b257b181b87dc440f27735ece9
Related: OS#4963
The file system exporter function export() selects the exported EF from
inside a try block. It also selects the parent DF again when leaving the
try block. If an exception ocurrs during select this is fine, but if it
happens during read it leaves the EF selected which makes messes up the
recursive filesystem walk.
There are also minor inconsistancies with the exception strings and the
path displayed in the execption strings
Related: OS#4963
Change-Id: Ie9b1712b37e5b39e9016497185510a2a45c4ca6c
When using the method walk() to walk through the filesystem tree, then
the action() callback must not change the currently selected file.
Unfortunately this can easily happen and result in unpredictable
behavior. Lets add a check + an exeception for this to make debugging
easier.
Change-Id: I6778faa87bdf5552da74659206bf7a6fc0348d0c
Related: OS#4963
At the moment we only have a basic version of a verify_chv commnad, but
in order to handle any CHV/PIN related situation we also need commands
to enable, disable, change and unblock CHV.
- fix verify_chv commnad: more distinct parameter names, better help
strings, correct pin code encoding and add external source lookup
- Add unblock_chv, change_chv, enable_chv and disable_chv commands
- add/fix related functions in commands.py
Change-Id: Ic89446e6bd2021095e579fb6b20458df48ba6413
Related: OS#4963
When no ADM pin is found in the external data source, then print an
error message that tells the user that this is the case.
Change-Id: If8f88b43f283fbe459be1b30db35d984022840ac
Related: OS#4963
When a record or a binary file is written the card goes throth a full
flash/eeprom write cycle at this location, even when the data does not
change. This can be optimized by reading before writing in order to
compere if the data we are about to write is actually different.
Change-Id: Ifd1b80d3ede15a7caa29077a37ac7cf58c9053f1
Related: OS#4963
It can be hard to manage ADM pins when working with different cards at
the same time. To make this easier, add an automatic way to determine
the ADM pin for each card from a CSV file.
- add a CardData clas model that can be extended to to get the data from
various different sources. For now use CSV-Files. Also add a way how
multiple CardData classes can be registered so that one global get
function can query all registered CardData classes at once.
- automatically check for CSV-File in home directory and use it as
default CardData source unless the user specifies a CSV file via
commandline argument.
- extend the verify_adm command so that it automatically queries the
ADM pin if no argument is given. Also do not try to authenticate if
no ADM pin could be determined.
Change-Id: I51835ccb16bcbce35e7f3765e8927a4451509e77
Related: OS#4963
When the ADF is selected, then this is done by the AID. At the moment
only the first 7 bytes of the AID are used to select the ADF.
sysmo-isim-sja2 tolerates this, but sysmo-usim-sjs1 does not. The Cards
class already has methods to deal with this problem. The method
select_adf_by_aid takes an ADF name and completes the AID from an
internal list. This can be extended to support partial hexadecimal AIDs
as well.
Change-Id: If99b143ae5ff42a889c52e8023084692e709e1b1
Related: OS#4963
The class ShellCommands defined in ADF_USIM overloads useful CommandSet
classes defined in the superclass, making their commands inaccessible.
Also ts_31_102 does not have such a class definition in the ADF_ISIM
class, so lets remove this class.
Change-Id: I0e67c570fc4f17641d990a9cd239632ecf622de3
Related: OS#4963
Some cards may have additional propritary EF files which pySim-shell
does not support. If the user knows the exact FID the file can still be
selected and it is possible to read the file type and memory model from
the select response. This info can be used to create a new file object
at runtime that will work like any other EF/DF.
Change-Id: Iafff97443130f8bb8c5bc68f51d2fe1d93fff07c
Related: OS#4963
The Change I83d718ff9c3ff6aef47930f38d7f50424f9b880f removes the
keyword arguments from the CardProfile class constructor. This requires
us to use the keywords during instantiation since we can not rely on
the position anymore.
Change-Id: Ia62597c59287848662dbbedcc38ba90f183c4aca
pySim-shell defines, just like the other pySim programs commandline
arguments that take an ADM pin to authenticate at the card as admin. The
arguments are defined, but not used. Add the missing authentication
part.
Change-Id: I6bed14eb8f4124e28d593cf0816dbe58e7271322
Related: OS#4963
The do_update_... functions do always print the returned data. However,
there may be no data. If this is the case than an empty line is printed.
This may cause ugly log output, especially when working with scripts.
Change-Id: Ia9715d46ec957544cfbeea98d2fe15eb74f5b884
Related: OS#4963
All all files (CardFile) have a human readable description but there is
no command to display that description yet
Change-Id: If716cf3c6b09d53dca652b588671487d5343cf58
Related: OS#4963
add a new command "export" that can either export indidividual files or
a whole directory tree. The command will generate a script that contains
update_binary and update_record commands along with the file contents.
This script can later be used to restore multiple files at once.
Change-Id: I82f3ce92cd91a5ed3c4884d62f6b22e9589c8a49
Related: OS#4963
When the select command is entered with no parameters it fails with an
exception. Lets just output the currently selected file and exit
instead.
Change-Id: I541bd5ed14f240cd1c2bd63647c830f669d26130
Related: OS#4963
Add a commondline option so that the user can supply pySim-shell with a
script file name. This script then runs automatically on startup. (to
avoid ending up at the shell prompt a quit command at the end can be
used to exit after script execution)
Change-Id: I69f5224087023650340fbfee74668e1850345f54
Related: OS#4963
currently ADF.ISIM and ADF.USIM are always added regardless if there is
a matching application on the card or not. Lets check what applications
are actually installed and add ADF.ISIM and ADF.USIM dynamically.
Change-Id: I42ee23375f98e6322708c1c4db6d65e1425feecd
Related: OS#4963
In the method add_application() the method name should be append()
instead of add().
Change-Id: Ic8ad62567968e09786eac86f219b56a3d3200511
Related: OS#4963
On the cration of the PysimApp object only the basic commands in
pySim-shell.py are registered, since the MF is only created but not
selected, the file specific commands of the MF are not available. To
make them available, select the MF once on startup before entering the
cmdloop.
Change-Id: Ib63191f44e7c8ae07b0128a9affba40b44957adc
Related: OS#4963
The SW_match function takes a given status word and compares it against
a pattern that may contain wildcards (x or ?). This works by creating a
masked version of the SW using a pattern first (each hex digit is
replaced by a wildcard charafter if the pattern has a wildcard in the
same position). Once this is done, the resulting masked version is
compared at the pattern. However, the current implementation can not
work, since it compares the input SW against the pattern to decide
wihich chrafters should be masked. The input SW never contains wildcard
charafters.
Change-Id: I805ad32160fcfcb8628bf919b64f7eee0fe03c7e
Related: OS#4963
The _scc.veryif_adm() method already does status word checking
internally and also raises an execption should the authentication be
unsuccessful, so we do not have to put an additional status word check +
execition when we use the method from cards.
Change-Id: I785d27e4d49a9cda1a771b56ce5ac9c1f1d1e79a
Related: OS#4963
At the moment we use the send_apdu_checksw() method to send the APDU for
ADM authentication. This method only checks if the command returns with
sw = 9000. If not it raises an exception that the sw is not as expected.
The user may think that this is a problem with thr reader, pcscd or
pySim in the first place and may try multiple times until the card is
permanently locked. A better execption string that also displays the
tries which are left may be helpful.
Change-Id: Icf428831094f8c1045eefaa8cb2b92e6a36b0c13
Related: OS#4963
The file identifier of a file is strictly defined as a two digit
hexadecimal number. Do not allow adding child files that violate this
constraint.
Change-Id: I096907285b742e611d221b03ba067ea2522e7e52
Related: OS#4963
The __main__ function in filesystem.py seems to be some experimental
testcode from the very beginning of pySim-shell. Lets drop it.
Change-Id: I34f459469dfc45711ad0928c83184d7f99e0f5e3
Related: OS#4963
The method add_file of class CardDF does some constraint checking
to the basic file parameters (e.g. fid). Since one might also expect
those checks in the superclass CardFile lets leave a comment to make
the code better understandable.
Change-Id: Iebae28909fe6aade3bd4024112a222819572d735
Related: OS#4963
It is better to use the term "fid" instead of "name" when a reserved FID
is detected.
Change-Id: I054f3b3a156f0164c62610cfde1aec2145c20925
Related: OS#4963
We might add functionality that may require to walk through the entire
filesystem tree to perform an action to all files at once. Lets add a
generic walker that gets a function pointer that can carray out a file
specific action then. Also add another command that just displays the
whole filesystem tree.
Change-Id: If93d24dfb80c83eda39303c936910fa1fa7f48f8
Related: OS#4963
pysim-shell does not have a convinient way to list the files available
in one directory. Tab completion currently is the only way to obtain a
list of the available files. Lets add a dir command to print a file
list.
Change-Id: Ic06a60e0a0ec54d9bb26e151453ceb49d69e3df7
Related: OS#4963
The flags NAMES, FIDS and APPS do not properly distinguish between
applications and normal files. With APPS it is only possible to exclude
or include the selectable applications in a list with NAMES or FIDS, but
it is not possible to get only the application names or identifiers.
- remove the APPS flag
- rename NAMES to FNAMES and make it only normal file related
- add ANAMES and relate it only to application (ADF) names
- add AIDS and relate it only to application identifiers
Change-Id: Id07e0dcbab10cd78c1b78d37319b7b0e5e83b64d
Related: OS#4963
At the moment we can only request pySim-shell to dump a specific record
of a file. However, it may be useful to dump multiple records of a
record oriented file at once.
Change-Id: Id62db2cba4e3dfb6a7b3e6be8b892c16d11a8e3e
Related: OS#4963
The file identifier (and allso application ids for ADFs), are
hexadecimal. We should be case insensitive when accepting hex
identifiers but file names should still be full matched.
Change-Id: Ibe283a108ddc9058af77c823b7222db555e1e0f6
Related: OS#4963
since we have added pySim-shell.py that has a lot of locations where the
user can enter hexadecimal data there is an increased need for input
validation. Lets add a central is_hex function that verifies hex
strings.
Change-Id: Ia29a13c9215357dd2adf141f2ef222c823f8456d
Related: OS#4963
When requesting what DF/EF/ADF are selectable it is useful to have some
control of what we do not want in the resulting list.
Change-Id: Idb50a512bfdbfdf2e98f2ce0e89928cb0ff19f5e
Related: OS#4963
The SerialSimLink only has an _sl member if serial initalization was
successfull. If we close a serial connection, check if we even have the
_sl member. Otherwise move on silently.
Change-Id: Ic3f3f5e50d780f424da7d0be5733d7167bb7159c
The most common reason for pySim to crash is when it is executed without
commandline parameters. Then pySim will expect a serial reader on
/dev/ttyUSB0 since this is the default. Lets check if /dev/ttyUSB0 even
exists before trying to open it.
Change-Id: I7545c728b531e9a796eee8f80f0b08d4097f8399
Failed reader initializations happen frome time to time, mostly because
of messed up commandline arguments. This results in ugly crashes very
often. Lets control this a bit by catching the exception string and
print it.
Change-Id: I313017355da01bbef7c3d3f1899555aadb509319
The card in the automatic test setup had been replaced, change the ADM
pin and the ICCID so that it matches the new card. Also the new card
does not feature an MSISDN file and the formatting of the EHPLMN file
changed in the output of pySim-Read.py
Change-Id: I413f4b8267e01727c59ad135881b3a2ed723ff5f
Some of the cards do not implement the erase method that each card
should have. However, having an empty method in each of those classes
does not make too much sense. Lets rather have an erase method in the
superclass (Card) that prints a warning to inform the user that erasing
the spcified card is not supported.
Change-Id: If5add960ec0cab58a01d8f83e6af8cb86ec70a8d
Resetting the contents of a file before re-writing it with parameters
might be helpful when implementing the currently empty erase() methods
of the various card implementations. Lets add two methods, one for
resetting a binary file and one for resetting a specific record in a
record oriented file
Change-Id: I3c3a4ef3d3f358404af307a68a20b7059f1a9e8d
In case try to decode the contents of an uninitalized EF.IMSI, the
function dec_imsi() would crash because it truncates all 0xFF from the
swapped version of the EF.IMSI contents and then accesses the first
element of the buffer. This always works for EF.IMSI contents that
contain valid IMSI data, but if all bytes are set to 0xFF, then no data
is left in the buffer after truncating, so lets check if we even have
bytes left before we move on with the decoding.
Change-Id: I93874a1d7e0b87d39e4b06a5c504643cfabb451c
When writing to files we often just write without making sure that the
actual file contents actually written. Lets add features to do a
read-after-write verification when writing to files.
Change-Id: I7be842004102f4998af376790c97647c107be3d5
For record oriented files we have the methods record_size() and
record_count() to determine the dimensions of a record oriented file,
however, we miss a similar function for regular binary files. Lets add a
method binary_size() to quickly determine the size of a non record
oriented file
Change-Id: I0593f2de7f34d5654a19e949dc567a236e44e20c
The lower part of gen_parameters() in pySim-prog.py contains some code
that checks whether the ADM pin supplied in its hexadecimal or in its
string form and generates a sanitised pin_adm from that. Lets separate
this part as it may become useful elsewhere too.
Change-Id: Ifead29724cc13a91de9e2e89314d7fb23c063d50
The contents of EF.AD me be uninitalized (all bytes set to 0xff). If
this is the case reset all bytes of the file to 0x00 and continue the
update of EF.AD with this value.
Change-Id: I57cf53e0c540469f11b6d85bd3daf3f9e14c237e
pySim-prog and pySim-read currently echo back the pcsc reader id (or
baudrate/socket, depending on the interface used). This makes the output
unecessarly undeterministic, which becomes a problem when verifying the
putput in tests. Lets not echo those variable, user supplied parameters
back. Also lets move the code that does the initalization to utils, so
that it can be used from pySim-prog and from pySim-read (code dup).
Change-Id: I243cc332f075d007b1c111292effcc610e874eb3
Related: OS#4503
The method update_ad() caluclates the size of the data it had just
read from EF.AD, but the result is never used, lets remove that
line
Change-Id: Id38c0dc725ab6874de3ea60132482a09372abe9e
When pysim-prog programms the application specific files of ISIM and
USIM it selects the application by its AID first. If depending on the
card profile one of the applications is missing the selection of the
related ADF will fail. Lets check the presence of the AID first and if
it is not present lets skip the programming of the related files.
Change-Id: I0eec6ed244320fcd4dc410b6fab20df9c64ff906
Related: SYS#4817
There is a new card version with a different ATR, lets add the ATR for
this card to support it as well.
Change-Id: I222faea89c1df58c36a19b28449dffb84a956e74
Related: SYS#4817
The sysmo-isim-sja2 cards are not yet supported by pysim. Lets add
support for writing KI and OPC in ADF.USIM and ADF.ISIM as well as the
remaining common simcard parameters.
Related: SYS#4466
Change-Id: I23e2b46eac0e0dbc2b271983d448999f6a459ecf
The Change I12e6b46787efb39c5745f4e7f3cdcca9209881b8 was not as
effective as expected. Diff is used wrongly so that no lines are
compared. Lets fix this
Change-Id: I1601d8a2b3e1c07fe1eba375ea8deae3d50bbef0
When working with USIM/ISIMs, The method __record_len() that is used
by the record_count() method returns the length of the file instead
the actual record count. This causes record_count() to return always 1
Change-Id: If810c691893c022e9e9d87218dd0a334c5b2d579
- The .ok files currently dictate in which pysical reader device the
card must be placed. Lets remove this dependncy to make the setup more
reliable. Testing in which reade a card is placed is not in the scope of
our tests.
- Fix bug in pysim-test.sh (test runner), so that the veriable $ADM_HEX
gets reset after the execution of the tests.
Change-Id: I12e6b46787efb39c5745f4e7f3cdcca9209881b8
pySim-prog.py features a way to detect which card type is in the reader.
The returned value is often used as filename for testfiles and other
automated operations. Therefore lets not have spaces in simcard names
Change-Id: Ib7428fab767874dd53478d7c64601ff8938e05aa
In case the MCC/MNC are not supplied with a CSV file we cut out the
missing values from the IMSI string. Lets use a function to do this and
also check the input parameters.
Change-Id: I98e5bf8f9ff2a852efb190cc789edf42c5075bf8
At the moment MNC and MCC are represented as integer numbers inside the
parameter array while all other parameters are represented as strings.
Lets use strings for MNC/MCC as well to simplify the parameter handling.
We will also not loose the length information in case of leading zeros.
Change-Id: Ia2333921a4863f0f26ee923ca796e62ec5e2d59a
At the moment we do not chack if the CSV file exists at all. This may
lead into a crash while programming the card. Lets check the CSV file
before we start.
Change-Id: I2643996282d88e512c17901ab0e1181677d5dd6c
Related: SYS#4654
Inside of pySim all CSV headers are defined in lower case and are
evaluated case sensitive. This means that a CSV file that contains the
headers in uppercase for example will not parse. Lets make sure that the
CSV headers are evaluated case insensitive to increase compatibility
with slightly different formats.
Change-Id: I1a476e7fc521d1aad2956feec3db196156961d20
When the CSV file fails to read the error message is just "Error reading
parameters". Lets make clear that this error is related to a problem
with the CSV file
Change-Id: If285c1fbf7d285f512b573040f1b8983e4e3087e
When using the batch mode of pySim-prog, the user has to insert/remove
the cards from the cardreader manually. This is fine for small batches,
but for high volume batches this method is not applicable.
This patch adds support for the integration of an automatic card handler
machine. The user can freely configure a custom commandline that is
executed when a card should be inserted or moved to a good/bad
collection bin.
Change-Id: Icfed3cad7927b92816723d75603b78e1a4b87ef1
Related: SYS#4654
When reading CSV files we currently have no option to provide a
pin_adm_hex field like we already have it as commandline option.
Lets add an option pin_adm_hex for this.
Change-Id: I53e8d666d26a06f580725a8443a335643d10192c
The length field in wavemobile sim cards is not set, so that the field
stays at its initial value, which is 0xFF. Lets write the correct mnc
length here.
Change-Id: Ieda0ce864bf3e8c7b92f062eaa3a5482c98507e2
Related: OS#3850
At the moment EF.AD, which contains the length of the MNC is not
updated. For two digit MNC (the usual case) this is fine since the
length is set to 2 by default. However, when one wants to set an MNC
with 3 digit length the file must be updated, otherwise the third digit
of the MNC is recognized as part of the MSIN.
Change-Id: I827092b2c7f7952f54b2d9f8dbda419a0dbfaf65
Related: OS#3850
The files EF.PLMNsel, EF.PLMNwAcT and EF.OPLMNwAcT are currently not
programmed for sysmo-usim-sjs1, lets add them.
Change-Id: I0cac3041f1902383d98d6dc211cf31ae6e3a610b
Related: OS#3850
The hexadecimal tag defintions of pytlv are case sensitive strings. So
'A5' is something different than 'a5'. Pytlv uses lower case letters for
the upper hexadecimal digits. Lets correct this.
Change-Id: I41a9933707783f6b1b68ebd91a365405ac0892d0
Related: OS#3850
Philipp Maier