Change-Id: I870a0aa8e251bbb53249c54bfcaa45de5b5a9486
Handling the USB message queue is done in an ISR and take quite some time.
This can cause a USART/SIM sniffing buffer overrun, resulting in data loss.
By setting the USB IRQ lower than the USART IRQ, the USB ISR can be
interrupted (for short) and no data gets lost.
Change-Id: Ia625b09eb30bb7b43edd3989f697d8ef33200f28
don't wait for space to be available in the buffer since since would
prevent from processing non-console (e.g. debug) more important data
Use USART 0 connected to the SIM card side to sniff the communication.
The card side can also measure ETU times.
Do proper pin initialization.
This code can already capture the ATR communication between phone and card.
because the applications share the board capabilities defined in
libboard/*/include/board.h and USB configurations are enabled according
to the previously defined capabilities in libcommon/source.usb.c, all
applications actually offer the same functions.
thus creating the trace application is only mainly a cosmetic change, as the
sniffer function will also be present and enabled in the cardem application.
adc2uv is not used in boardver_adc.c.
a FIXME comment says it should be shared with mode_cardemu.c.
the exact same code is already available in mode_cardemu.c
Sometimes descriptor string 0xee is requested.
This is a mechanism used by Microsoft Windows to further identify the USB device.
Instead of stalling, as is the original code, leading to an USB reset, we send an empty packet.
I am not sure if sending an empty string would be better, but an empty packet seems sufficient.
During DFU download the destination start address is checked to not exceed the
RAM or flash end address, but it is also necessary to check if the end of the
data to be downloaded is also within the allowed range.
When downloading to RAM it is also necessary to check if the data to be
downloaded does not overwrite (i.e. corrupt) the stack.
fixes following warning:
libboard/common/source/board_cstartup_gnu.c:137:11: warning: assignment to 'void (*)(void)' from 'unsigned int' makes pointer from integer without a cast [-Wint-conversion]
appReset = pSrc[1];
Use USART 0 connected to the SIM card side to sniff the communication.
The card side can also measure ETU times.
Do proper pin initialization.
This code can already capture the ATR communication between phone and card.
Sometimes descriptor string 0xee is requested.
This is a mechanism used by Microsoft Windows to further identify the USB device.
Instead of stalling, as is the original code, leading to an USB reset, we send an empty packet.
I am not sure if sending an empty string would be better, but an empty packet seems sufficient.
because the applications share the board capabilities defined in
libboard/*/include/board.h and USB configurations are enabled according
to the previously defined capabilities in libcommon/source.usb.c, all
applications actually offer the same functions.
thus creating the trace application is only mainly a cosmetic change, as the
sniffer function will also be present and enabled in the cardem application.
During DFU download the destination start address is checked to not exceed the
RAM or flash end address, but it is also necessary to check if the end of the
data to be downloaded is also within the allowed range.
When downloading to RAM it is also necessary to check if the data to be
downloaded does not overwrite (i.e. corrupt) the stack.
fixes following warning:
libboard/common/source/board_cstartup_gnu.c:137:11: warning: assignment to 'void (*)(void)' from 'unsigned int' makes pointer from integer without a cast [-Wint-conversion]
appReset = pSrc[1];
adc2uv is not used in boardver_adc.c.
a FIXME comment says it should be shared with mode_cardemu.c.
the exact same code is already available in mode_cardemu.c
the __attribute__ ((format (printf, 1, 0))) declaration remove the following
compilation warning:
warning: function 'osmo_panic' might be a candidate for 'gnu_printf' format
attribute [-Wsuggest-attribute=format]
osmo_panic_default(fmt, args);
The original board startup script is provided by Atmel.
It has been modified to handle application or DFU booting.
The copyright notice has been updated to reflect this change.
Kévin Redon