Commit Graph
25 Commits
Author SHA1 Message Date
Kévin Redon b88c73bcfd board: comment USART definitions and add corresponding IRQ numbers 2018-07-01 18:33:28 +02:00
Kévin Redon 1225e41aad simtrace: add dedicated power pins configuration for sniffing 2018-07-01 18:33:28 +02:00
Kévin Redon 7ddf46ce1c sniff: use USART 0 instead of USART 1
Use USART 0 connected to the SIM card side to sniff the communication.
The card side can also measure ETU times.
Do proper pin initialization.
This code can already capture the ATR communication between phone and card.
2018-07-01 18:33:28 +02:00
Kévin Redon 5a7c848b43 SIMtrace board: comment and fix pin definition 2018-07-01 18:33:28 +02:00
Kévin Redon aa70887ce0 sniff mode: handle USART 1 RX interrupt to show sniffer data 2018-07-01 18:33:28 +02:00
Kévin Redon baff8d2c22 add more USB configuration checks and error messages 2018-07-01 18:33:28 +02:00
Kévin Redon 7bcbae3ad9 enable (empty) sniffer support for SIMtrace board 2018-07-01 18:33:28 +02:00
Kévin Redon 33d62aa17a copy working cardem app to trace
because the applications share the board capabilities defined in
libboard/*/include/board.h and USB configurations are enabled according
to the previously defined capabilities in libcommon/source.usb.c, all
applications actually offer the same functions.
thus creating the trace application is only mainly a cosmetic change, as the
sniffer function will also be present and enabled in the cardem application.
2018-07-01 18:33:28 +02:00
Kévin Redon e4cd52c2e3 fix: remove unused code
adc2uv is not used in boardver_adc.c.
a FIXME comment says it should be shared with mode_cardemu.c.
the exact same code is already available in mode_cardemu.c
2018-07-01 18:33:28 +02:00
Kévin Redon a9bca48914 ring buffer: increase buffer size from 128 to 256 to cope with large debug output 2018-06-29 20:07:31 +02:00
Kévin Redon eac1bec428 console: use buffer and interrupts instead of busy loops for UART debug output 2018-06-29 20:07:31 +02:00
Kévin Redon 51c128bc35 DFU: fix typo in USB strings 2018-06-29 20:07:31 +02:00
Kévin Redon 869dbfafe4 DFU: incread watchdog timeout and restart watchdog before writing in flash to prevent the watchdog to trigger while flashing 2018-06-29 20:07:31 +02:00
Kévin Redon 80303c135b DFU: only boot the application if it has a valid start 2018-06-29 20:07:31 +02:00
Kévin Redon d86cab0080 DFU: uncomment print message when DFU is forced using the button 2018-06-29 20:07:31 +02:00
Kévin Redon b73f0a00bc DFU: unlock the flash before writing, verify written data, and relock it 2018-06-29 20:07:31 +02:00
Kévin Redon f5869d4a59 USB: implement USB reset by setting the on-board pull-up on D+ low 2018-06-29 20:07:31 +02:00
Kévin Redon 4136c242a8 USBD: send empty packet when non-existing descriptor string is requested
Sometimes descriptor string 0xee is requested.
This is a mechanism used by Microsoft Windows to further identify the USB device.
Instead of stalling, as is the original code, leading to an USB reset, we send an empty packet.
I am not sure if sending an empty string would be better, but an empty packet seems sufficient.
2018-06-29 20:07:31 +02:00
Kévin Redon 318309f30f dfu: fix address destination check and add stack overwrite check in USBDFU_handle_dnload
During DFU download the destination start address is checked to not exceed the
RAM or flash end address, but it is also necessary to check if the end of the
data to be downloaded is also within the allowed range.
When downloading to RAM it is also necessary to check if the data to be
downloaded does not overwrite (i.e. corrupt) the stack.
2018-06-29 20:07:31 +02:00
Kévin Redon 0828b914e7 README: rewrite to better explain environment variables and point to the wiki for flashing 2018-06-29 20:07:31 +02:00
Kévin Redon 76be7c806e fix pointer casting warning
fixes following warning:
libboard/common/source/board_cstartup_gnu.c:137:11: warning: assignment to 'void (*)(void)' from 'unsigned int' makes pointer from integer without a cast [-Wint-conversion]
  appReset = pSrc[1];
2018-06-29 20:07:31 +02:00
Kévin Redon a38a126361 fix: initialize uninitialized variable in USBDFU_DFU_RequestHandler 2018-06-29 20:07:31 +02:00
Kévin Redon 6822716428 add printf attribute declaration to remove warning
the __attribute__ ((format (printf, 1, 0))) declaration remove the following
compilation warning:
warning: function 'osmo_panic' might be a candidate for 'gnu_printf' format
 attribute [-Wsuggest-attribute=format]
   osmo_panic_default(fmt, args);
2018-05-21 17:18:58 +02:00
Kévin Redon a93f7273b3 fix: remove duplicate volatile declaration 2018-05-21 17:17:20 +02:00
Kévin Redon 432ba5140e add copyright notice
The original board startup script is provided by Atmel.
It has been modified to handle application or DFU booting.
The copyright notice has been updated to reflect this change.
2018-05-21 17:13:50 +02:00