A card that re-queues a command immediately after each accepted TR
(live 2026-10-11: the EP BAP card re-issued the same PROVIDE LOCAL
INFORMATION 1100 times) turned the background poll's FETCH/TR chain
into an unbounded loop that held _CARD_LOCK forever - every card
operation, a test run's start included, blocked behind it.
The chain now yields:
- _handle_proactive_chain aborts before the next FETCH while a test run
owns the card (_TEST_RUNNING) - the pending command stays for the
script - and takes max_rounds; the background poll passes
_POLL_CHAIN_MAX = 10, so a chatty card cannot hold the lock.
- _do_status_poll re-arms on its run skip (a heartbeat that never
fetches); _timer_expired and the BIP Data-available event wait during
a run; _bip_flush_channel_events stays quiet too.
- _sim_resume_poll() resumes polling at every run end - the two worker
bodies, their exception paths and the spawn failure.
Also the TR command-details qualifier echo (TS 102 223 6.8.1: the
object shall be identical to the command's): _build_tr,
testscript.build_tr and the interactive _menu_send_response echoed a
hardcoded 00 - harmless for the loop's qual-00 PLI, wrong for any
other qualifier. The menu pendings now carry cmd_qual (parsed in the
on_fetch handler).
Tests: the chain bound/abort (a fake card re-queueing a command), the
poll/timer guards, the resume wiring, the qualifier echo in both
builders. 883 frontend + 865 Python; sw cache simple-v425.
A profile file rule may carry accessRules {expected, enabled?, ignoreFciRef?}:
the check resolves the file FCI's '8B' security-attribute reference against
the card's (or the snapshot's) EF.ARR copies and compares the decoded rules as
a set - record-number independent, so cards with a different EF.ARR layout
still verify. Missing/extra lines are listed in the report; a file whose FCI
lost the reference fails; a reference that cannot be resolved (no cached
EF.ARR / record out of range) is an unverifiable error.
Capture fills the lines when a profile is created from a card
(pysimArrEnsure) or a snapshot (profilerSnapshotArr), before the contents
ignore list - the rules are the meaningful per-file check, and EF.ARR's own
contents stay ignored by default as before. The editor shows the captured
lines read-only with a None/Check toggle; with exact FCI an optional "Ignore
the EF.ARR reference in the exact FCI" checkbox compares the FCI without the
'8B' value (every other DO stays byte-exact; fcpWithoutArrRef), so a different
record number no longer fails while the rules check owns its meaning.
The snapshot comparison is unchanged (byte-exact EF.ARR + FCI catch record
renumbering). New 'Access rules' aspect in the report/summary with a
matching/missing/extra line diff.
Tests: capture, the four check outcomes, the ignore-FCI path, the
aspect/report, validation. 877 frontend + 857 Python; sw cache simple-v424.
The file manager's decoded FCI shows the '8B' security attribute
reference (EF_ARR 2F06, record 23). The referenced record's access
rules are now rendered as indented muted lines under that row, decoded
with the existing EF.ARR record decoder (AM_DO/SC_DO conditions).
The server reads the card's ARR copies (MF/2F06 and ADF.USIM/6F06,
best effort) once per card session in _apply_equipped_card and keeps
them as server.arr; GET /api/arr serves the cache without the card
lock, a disconnect clears it, and a write to an ARR copy through
/api/write refreshes it. The PWA fetches it lazily per card session
(pysimArrEnsure, keyed by card_session) and resolves the reference with
the selected file's DF context: an ADF.USIM file uses the ADF's 6F06
copy, the implicit reference form too (ISO 7816-4 5.4.3.3 lookup
order). Unresolvable references stay silent.
The '8B' decode now covers all three ISO 7816-4 Table 25 forms:
implicit ARR byte / FID + record / FID + (SEID, ARR) pairs - the pairs
form was mis-decoded as a record before. A snapshot resolves the same
references offline from its own captured EF.ARR copy.
Tests: the three forms, the resolution (DF preference, out-of-range
silence), the snapshot path, the server read/cache/route/write-refresh.
868 frontend + 856 Python; sw cache simple-v423.
A RAM install that fails at a LOAD step is typically the library-version
gate: the card verifies the CAP's import list when the Import component
completes (JC VM 4.5.2). The failure hint now says so and points at the
CAP compatibility test (Set all 0.0, then restore the lines one at a time
to find the missing package and version), replacing the old "retry with a
smaller LOAD block" advice, which is a red herring for that gate.
The failure popup gains a one-click "Run the CAP compatibility test"
button: it closes the popup, switches the RAM operation selector to compat
and runs it with the same .cap (the file input still holds it and the probe
list is prefilled with its imports), so the diagnostic is one click away.
An INSTALL [for load] refusal now gets its own advice instead of the LOAD
hint: the card refused to open the load file - usually a duplicate load
file from an earlier run (delete the package first, Explore -> Delete), or
rejected load parameters.
Tests: the hint's wording and branches (LOAD vs INSTALL [for load]), the
button handler's op switch. 862 frontend + 842 Python; sw cache
simple-v422.
The step editor's result select offers the full TS 102 223 8.12.0 list; the
spec's applicability table (Tables 6.1/6.2/6.3, "Proactive commands versus
possible terminal response") now groups it by the selected command: the
command-relevant values first (an <optgroup> "relevant for <command>"), the
rest after ("all other results").
The grouping is ordering-only - nothing is hidden, the manual hex entry
covers everything, and ANY (the drain's respond/first too) stays a flat list,
so a stored result always matches an option and real-card deviations remain
reachable.
TR_RESULT_BY_COMMAND is parsed from the pinned PDF (41 commands) and pinned
by frontend/tests/tr_result_by_command.json; trCommandCode() resolves the
editor's command names to their type codes (the first code per name,
matching testCommandOptions) and testFormSelect gained the optgroup support.
Tests: the map vs the parsed fixture, the grouping and the union (nothing
lost), the optgroup rendering and the call-site pin. 861 frontend + 842
Python; sw cache simple-v421.
Pressing the Phone tab's Send (or Rescue) re-sends the profile and starts a
new CAT session. The log was cleared with the rest of the session state,
losing the only record of the card's proactive commands - a common
tweak-the-profile-and-resend loop wiped the history every time.
_resend_terminal_profile now calls _mark_proactive_session(
'terminal-profile') instead: the entries stay, _PROACTIVE_SESSION_START
restarts (so the new session's elapsed values begin at 0) and a boundary
marker entry is appended. The PWA renders the marker as a
'- TERMINAL PROFILE re-sent - new CAT session -' divider (EN/RU).
Equip / disconnect keep the full clear (a card change); the pending-command
cancel, menu timeout and event list reset are unchanged.
Tests: the marker keeps the entries and restarts the timer, the reset still
clears, the re-send path pinned by source (Python) and the renderer's marker
branch (Node). 857 frontend + 842 Python; sw cache simple-v420.
A script's `event` value may be a code (a hex byte or a number) or one of the
server's name keywords (location_status, access_tech, network_rejection,
data_connection, ... - events.py's EVENT_NAMES); the API accepts both. The
PWA parsed every value as a hex string: the step list showed
'EVENT 0xaccess_tech' (the unparsed fallback), the editor fell back to event
03 (Location status) with the location field set, and saving then rewrote
the step to that event - silently corrupting name-authored scripts (the two
Alfa2G trigger scripts use access_tech/data_connection).
A mirrored EVENT_ALIASES map plus an eventCode() resolver (number / hex byte
/ name -> code) now feed the step summary, the editor's event block and the
event check; the summary's fallback no longer prefixes a non-numeric value
with 0x, and the editor keeps its canonical hex form on save (the same code).
Drift guard: the aliases live in frontend/tests/event_vectors.json, asserted
by the Node test (the PWA's map + resolver) and the Python test
(events.EVENT_NAMES + resolve_event). Tests: 856 frontend + 839 Python;
sw cache simple-v419.
The step editor's result select (the expect's respond, the proactive-drain's
respond/first) offered five symbolic values with no hex. It now offers the
full TS 102 223 v18.3.0 8.12.0 list (00-3F), labelled '<hex> - <alias>' (or
'<hex> - <spec name>'), plus a manual hex entry, and an optional
additional-information byte for the general result (83 02 <result> <info>,
default 00; the 8.12.2 terminal-problem values are suggested through a
datalist).
The script aliases were corrected to the spec: refused 03->22,
not_understood 04->32, modified 06->07, no_response 22->12 - a stored script
using one of them now answers with the corrected value; no_response stays
accepted for compatibility but is no longer offered by the editor.
The server's TR decode tables (_RESULT_NAMES_BASIC/_GENERAL, a GSM 11.14
mix displayed in the proactive log) are replaced by the spec table plus the
8.12.2 additional-information names; the dcs field parses as hex (0A used to
be refused and 10 read as decimal 10); the drain summary's 22 label is fixed.
The result labels are not translated (spec text); the unused RU keys were
removed. Shared fixture frontend/tests/tr_results.json, drift-guarded by
both suites. 855 frontend + 838 Python; sw cache simple-v418.
esc() is string-only, and most EVENT_FORMS option values are numbers
({v:0,l:'Normal service'}, the ACCESSTECH list, ...): the shared event-form
renderer escaped them with esc(o.v), so opening any such event form threw
'str.replace is not a function' - in the Phone tab (pysimEventSendForm) and
the test-script step editor alike (both call the same builder). Introduced
with v3.22.0, when the event action started using the Simulator's forms.
Option values (and the data-gr group) are stringified before escaping, the
pattern the sibling option builder already used; the emitted DOM values are
unchanged ("0", "10").
Test: event_forms.test.js renders every event form (Phone and step-editor
variants) and asserts a numeric option prefills selected - verified to fail
on the pre-fix code. 848 frontend + 830 Python; sw cache simple-v417.
The two buttons under a cntr_low verdict shared the red warning style, and
the notice only ever rendered in the RAM pill: an SCP80 send wrote it into
the hidden RAM container, so the plain-send view showed the verdict text
but offered no way to act on it.
- The counter probe button is amber and the preset jump green (the warning
text stays red).
- The probe renders the inline throbber the RAM operations use
(animate-spin, no modal) while it runs; its result replaces it in the
same box.
- Each pill carries its own notice box (#ram-cntr-low / #sp-cntr-low):
ramShowCntrLow/ramSyncCounter target the originating view's box and
clear the other, the SCP80 send passes 'sp' explicitly (it used to rely
on the keyset-view heuristic), and a new send attempt clears the stale
verdict (ramClearResults clears both boxes).
- The prebuilt Tailwind output was regenerated (npm run build):
border-amber-300/-700 and border-emerald-300/-700 were absent from
style.css (the stale-style trap).
Tests: the button classes, the spinner and the box targeting pinned in
ram.test.js. 846 frontend + 830 Python; sw cache simple-v416.
A suite with start_reset and an incomplete SCP80 preset reset the card and
only then refused the start: the reset block ran before _test_preset_error.
The reset now runs after the preset checks - a run that cannot start must
not touch the card - and stays before the ADM gate, which must see the
post-reset card session (the reset bumps card_session, invalidating the ADM
latch). The ICCID re-match stays with the reset block.
Test: an incomplete preset refuses with 400 and _card_reset_reinit is not
called. 846 frontend + 830 Python; sw cache simple-v415.
An unconfigured PLI dictionary answered result-ok with no data object,
which confuses applications that expect data. The dictionary now has a
base layer of sensible defaults for the qualifiers the pinned ETSI specs
define (TS 102 223 8.x, tags per TS 101 220 V18.3.0 Table 7.23):
- location as the test network 001/01 + LAC 0000 (8.19),
- the classic test IMEI 490154203237518 as F-padded BCD (8.20) and its
IMEISV (8.74),
- language 'en' (8.45), Timing Advance (2E/AE), E-UTRAN (8.61; UTRAN +
E-UTRAN for the multiple-technology qualifier 0E),
- automatic search mode (8.75), a full battery (8.76).
An override set through /api/pli-dict wins, and clearing a field restores
its default (the PWA's Save re-renders the effective values; the GET returns
the override or the default for the full qualifier set). The date/time
qualifier stays empty so the host clock keeps answering it; the
3GPP/3GPP2-specific qualifiers (NMR, ESN, MEID, CSG/HNB, WLAN, slices,
CAG, ...) stay empty - the ETSI specs define no contents for them, and a
fabricated object would mislead the application more than no answer.
Verifying the values against the pinned tag table exposed pre-existing bugs
in the PWA's PLI inline codecs, fixed here:
- Timing Advance used C6 (a 3GPP2 tag) -> 2E/AE;
- IMEISV used 94 (the IMEI tag) -> 62/E2;
- Network Search Mode used AD (the Language tag) -> 65/E5, and its labels
were swapped ('00' Manual / '01' Automatic per 8.75);
- the battery field was a percentage where 8.76 is an enum ('00' very low
... '04' full, 'FE'/'FF');
- encImeiPli padded the odd 15th digit with 0 instead of F (TS 124 008).
Docs: help EN/RU, api.md, the guide. Tests: the defaults + the resolution
order (Python), the HTTP endpoint's defaults/override/clearing, the codec
tags/labels and a server-defaults drift guard (Node). 846 frontend +
829 Python; sw cache simple-v414.
A suite may carry `start_reset` (store schema v2, default false; the editor's
"Start with card reset" checkbox): before the run, the server physically
resets the card and runs the full re-initialization - `_card_reset_reinit`
(extracted from the eSIM profile-switch reinit) does reset_card() + equip +
_apply_equipped_card + the shell registration probe.
The reset runs in _test_suite_run_request before the preset/ADM checks:
- the run's preset must still match the post-reset ICCID (a mismatch refuses
the start with a re-select hint),
- a require_adm suite re-verifies the ADM for the new card session (the
latch is per session).
The suite report carries start_reset + reset {ok, iccid, ms}; the PWA shows
"started with a card reset" in the report header and a RESET badge in the
suite list. Mid-run resets stay fatal.
Documented caveat: the init drain consumes the card's initial proactive
commands, so a script cannot catch the first command after the reset (they
stay in the proactive log).
Docs: test-scripts.md, api.md, help EN/RU, repo AGENTS.
Tests: 843 frontend + 827 Python; sw cache simple-v413.
The review of the v3.22.7 fix asked when an expect can raise after its
FETCH: the realistic case is the scripted TERMINAL RESPONSE encoding -
_encode_text raises UnicodeEncodeError when respond.text has a non-GSM
character while dcs is 00 (the default) or 04, i.e. after the command was
fetched and with the card's proactive session left unanswered. The other
candidates are guarded (the TPDU/PoR/file-list parsers, the PLI dictionary)
or need the card to be gone (a transport failure between the FETCH and the
TR).
normalise_respond now runs the same coding the TR builder uses and refuses
the script at load with an actionable message ("use dcs 08 (UCS2) for
non-GSM characters"), so the failure happens at save/run start, before any
FETCH; UCS2, ASCII and the empty answer are unaffected.
Also from the review: the guide's run-log line now documents the v3.22.7
format (TEST-RUN step N failed (<level>): ...), and the "unguarded item
text decode" observation proved a non-issue - _decode_stk_text is internally
tolerant (odd UCS2 / unknown prefixes fall back without raising), so the
item parsers are left alone.
Tests: a non-GSM text with the default dcs and with 04 is refused (the
message names dcs 08), UCS2/ASCII/empty pass, and a whole script is refused
with the same message. 843 frontend + 822 Python; sw cache simple-v412.
The runner's step loop caught an exception and hard-coded status "error" +
stop, ignoring on_fail - so a file-read of an absent optional file
(re-verified live on 3.22.6: MF/A153/49AC, note "6a82: Wrong parameters -
File not found", on_fail "warning" still stopped the run) could not express
the "read an optional file" pattern (49AC is documented optional: its
absence means no menu password).
The handler now treats a raised error as a failed "Error" check at the
step's level (the message as actual/detail and the note): on_fail "warning"
warns and the run continues, the default still stops; the drain-if-pending
behaviour is unchanged. Every raised exception is treated the same - the
two "file absent" raise paths (pySim's SwMatchError for model files and
probe_file's RuntimeError with the decoded SW for custom FIDs) cannot be
told apart by type, and load-time validation (normalise_script) stays
strict.
Docs: the guide's on_fail paragraph and run-errors list (the 6A82 bullet),
api.md and help EN/RU. Tests: a raising file-read with on_fail "warning"
warns and the next step runs; without on_fail the run still stops.
843 frontend + 821 Python; sw cache simple-v411.
Findings from the review of the v3.22.5 router:
- the Card reader's pills (file manager / pySim command line / raw APDU)
join the router - the one view group the sweep missed: _pysimSub feeds the
state, pysimSwitchSubtab records, navCurrent/navApply know the tab;
- the nested parser switch (cApduSwitchSubtab('parse'|'response'), used by
the send-to-parser jump) sets _parserSub before recursing, so the
recursion's own parserSwitchSubtab renders the target and the two records
collapse into one history entry instead of two;
- navApply catches a failing replay and falls back to the default tab (the
console carries the failure) instead of letting the exception escape the
popstate handler with a stale _navState;
- the cards editor's recorded preset id comes from _cardsEditId (set by
cardsEdit, cleared by cardsNew/cardsCancelEdit/cardsRemove) instead of
cards[_cardsEditIdx], so a store refetch that shifts the array can no
longer record the wrong preset;
- nav.test.js: pysimSwitchSubtab added to the hook list, a navCurrent
state-building test (all tab branches), the apply-side assertions and the
single-entry parser check.
Tests: 843 frontend + 819 Python; sw cache simple-v410.
The browser Back button now walks the app's own view stack:
- a small state object {tab, sub, parser, view, listtab, preset, suite,
script, item} is recorded on every view switch (navRecord/navCurrent/
navStateKey) via history.pushState - session-only, the URL never changes
(pushState throwing on file:// degrades to no history);
- popstate replays through the same switch functions under a _navApplying
guard (they re-render and re-translate): the seven tabs, every pill set
(SCP80 / Remote APDU + parser / Simulator / SCP81), the Cards list/editor
(preset id), the test-suite views (suite/script ids) and the Profiler
views/list tabs (profile/snapshot ids); unresolvable ids fall back to the
area's default view;
- the in-app Cancel/Back buttons (cardsCancelEdit, testScriptBack,
testBackToSuites, profilerBackToList, profilerSaveProfile) call
navReplace() so their entry is replaced instead of stacked, and the
initial entry is seeded with replaceState so the first Back returns to
the initial view.
The reported untranslated suite Run button was the tip of a larger gap: the
sweep found 21 t() keys without a Russian entry (Run/Suite/Move/Copy/Warning/
Text, the respond-result names, the event-data errors, the CAP tooltip, ...)
- all added, and html.test.js now asserts every t('...') literal and every
data-l10n/data-l10n-title attribute has a LANG_RU entry.
Tests: nav.test.js (the recording/replace hooks, the state-key
canonicalisation, the router core), the i18n completeness test, the
extracted-function stubs in the cards/phone/profiler tests.
842 frontend + 819 Python; sw cache simple-v409.
The runner's unexpected-pending-command guard fired for any non-expect step,
so a proactive-drain after a step that answered 91XX failed with
"unexpected proactive command pending (SW 91XX) - add an expect step or a
status action" - contradicting the drain's own doc ("consume whatever the
card announces") and the v3.22.2 RAM recipe ("an expect or a proactive-drain").
The guard now exempts a proactive-drain step: its STATUS poll re-announces
the unfetched command, fetches and answers it, and the drain's final-SW and
pending handling is unchanged (a still-pending card is handed to the next
step, an idle card passes). No pending-length plumbing: STATUS-first keeps
the drain's attempts/log semantics and tolerates a card that dropped the
command. The guard note now names the drain instead of the misleading
"status action" (a status action in that position also trips the guard).
Docs: the drain section in test-scripts.md, api.md's action list and the
help EN/RU drain bullet. Tests: 839 frontend + 819 Python; sw cache
simple-v408.
Three test-management issues:
- an expectation whose command type did not match the pending command
hard-coded level 'error', so on_fail "warning" tolerated "no command
pending" but not "a different command is pending". The check now honours
the step's on_fail - the tolerant form for "the applet either asks X or
does Y" (the mismatched command is still fetched and answered).
- moving a script between suites could answer 500 and leave two owners:
_test_script_move detached only from the suite named by the script's
suite_id and appended to the target unconditionally, so a duplicate
listing or a stale suite_id (a hand edit, an interrupted move) collided
on the attach. It now detaches from every suite that lists the script,
takes the on_fail from the explicit owner (suite_id if that suite lists
it, else the first lister), updates the script first (a refused
validation changes nothing) and re-attaches with a prune; the same-suite
no-op only applies when the target really is the only lister.
- reconcile_scripts_to_suites() now prunes duplicate listings to the
explicit owner (it only adopted before), so those states self-heal at
startup and after a bundle import; the "Imported scripts" suite is only
created when there are orphans.
Docs: the bundle-import note (importing into the source store duplicates
the suite and its scripts - the round-trip is not idempotent) and the
expectation on_fail clarification.
Tests: 839 frontend + 818 Python; sw cache simple-v407.
Two reported gaps:
- a scripted PROVIDE LOCAL INFORMATION expectation answered with an empty
TR - the PLI dictionary (and the host clock for the date/time qualifier)
was silently inert during runs while the poll path used it all along, so
an applet waiting for its data stalled behind a passing expectation. A
POLL INTERVAL expectation likewise never echoed the Duration (6.8.4).
testscript.build_tr() gained `answer_tlvs` (inserted after the Result per
the 6.8.0 order, before text/item/raw) and the shared
_test_terminal_response() wires the expect step, the proactive-drain
action and the run cleanup to it; the script's `raw` overrides, and a
non-success result gets no data object.
- a GP INSTALL/LOAD/DELETE step always failed the default exact-9000 check
although the envelope SW 91XX is the successful answer (the re-announced
SET UP MENU; XX is the pending command's length, never pinnable).
Documented rather than loosening the default: a new "Driving a RAM install
from a script" subsection in docs/test-scripts.md (the 9??? mask + por
any, the per-step pending rule - a proactive-drain/expect after every
91XX step), a sentence at the sw-default bullet, and an scp80
default-pinning test.
Docs: api.md's respond clause, help EN/RU's TR Config note.
Tests: 839 frontend + 812 Python; sw cache simple-v406.
The kind string `proactive` read like an expectation of a proactive command
(`expect` is the step type for that) although the action consumes and answers
them. Renamed everywhere:
- ACTION_KINDS / TEST_ACTION_KINDS (drift-tested), the normaliser branch and
its error strings, the dispatch and the helper names (_test_run_drain,
_drain_require_match/_label);
- the report label is DRAIN and the PWA summary reads "DRAIN x5 require ...
TR ok";
- the editor/collect/summary/problem branches, docs/test-scripts.md
(Proactive drain), docs/api.md, help EN/RU ("Очистка очереди proactive");
- the tests (TestRunnerProactiveDrain, the normalisation/data-check tests).
No stored scripts used the old kind (unpublished series), so there is no
alias and no migration. sw cache simple-v404.
Tests: 839 frontend + 804 Python green.
A suite is the root object: every script belongs to exactly one suite, the
suite holds the ordered member list by reference - the optional setup first,
the members, the optional teardown last - and runs them in one card session,
without resets and without resume.
- test_suites.py: the suite store (test_suites.json, --test-suites), validated
and atomic like the script store: roles normalised (setup first, teardown
last, at most one of each, a script appears once per suite), per-member
on_fail stop/continue and the suite-level require_adm.
- test_scripts.py schema v2: suite_id/require_adm; list_by_suite()/orphans();
the import reports the id_map a bundle import remaps with. v3.21.0 scripts
without a suite are attached once to an auto-created "Imported scripts"
suite (migrate_scripts_to_suites, called from __main__).
- API: /api/test/suites (+ update|delete|import - delete refused while
non-empty; the bundle import imports the scripts first, remaps the suite
references and skips unresolvable ones); the scripts endpoints gain
suite_id/require_adm plus move|copy (delete detaches from the suite first;
a suite update refuses a membership change).
- runner: /api/test/run {suite_id} resolves the members and the preset, runs
the ADM gate, then setup -> members (per-member on_fail) -> teardown. The
teardown always runs on a stop or a failure (skipped only when the card is
gone; it clears the stop flag for its duration); a card reset stops the
suite, skips the remaining members and is flagged. Members' live steps land
in the shared snapshot, their records (status/steps/note/log excerpt/
counters) in _TEST_RUN['suite']; the summary carries the counts, wall time,
preset, the SCP80 counters before/after per keyset and the session flags.
_test_log buffers the semantic lines (bounded) for the report's per-member
excerpts.
- ADM gate (_ensure_adm): a suite/script require_adm verifies the matched
preset's key once per card session (the /api/verify-adm badge sets the same
latch); a failure refuses the start, stamps the session (no automatic
retry) and needs a manual verify.
- PWA: the Test script pill becomes four views - the suite list (default),
the suite editor (the script list: role badges, on_fail, up/down, per-script
Run/Edit/Move/Copy/Delete, Add script with the templates), the script editor
(the step list; a single run shows its result under the steps and is not
preserved) and the suite report (per-member blocks with the step table,
notes and run log; summary; export JSON/Markdown). Suite bundles export/
import; the legacy script export imports into "Imported scripts". EN/RU.
- tests: the suite store/migration, the runner orchestration (order, on_fail,
setup failure, stop, card reset, teardown, per-member logs) and the ADM gate
(Python); the suite HTTP paths; the PWA report/Markdown/wiring (Node).
Tests: 833 frontend + 794 Python; sw cache simple-v397.
Five reported issues, plus the action that makes an explicit drain possible:
- on_fail is honoured by every step failure: an expectation with no pending
command (or a FETCH that returns nothing) fails as a Command/Fetch check at
the step's level instead of raising past it; the default still stops the
run, on_fail "warning" continues (the tolerant consume-if-pending form).
- the run cleanup answers ok (0x00) and keeps draining while the TR answers
91XX (bounded); a cancel is only sent when a script asks for it - it tells
the card the user aborted the session and pushes assertive applets onto an
error path.
- new `proactive` action: STATUS rounds consume every announced command
(respond/first TERMINAL RESPONSE results, attempts/interval_ms bound) until
the card answers 9000; an optional require asserts at least one drained
command (an empty drain fails it), the final SW is the step's SW check and
a still-pending command is handed to the next step. PWA editor + summary +
validation, EN/RU help, docs, action-kind drift test.
- the PoR response form follows the command's TAR: _tar_is_rm (preset role
entries + the TS 101 220 Annex D ISD/RFM allocations) decides; a non-RM
TAR's reply is always raw (TS 102 226 4) - no fabricated status word even
when the bytes happen to parse (01 00 0B 91 ... used to read as SW 000B).
- a secured data too short for the compact structure (a 2-byte applet reply)
is recovered by _por_header_parse (the decode minus the compact parse; a
malformed packet or a failed RC/CC/DS check still yields no por) and
reported raw, so short applet replies are assertable via por.data.
Docs: test-scripts.md, api.md, help EN/RU, repo AGENTS. sw cache simple-v396.
Tests: 825 frontend + 755 Python green.
The counter an operation consumed was re-entered by the PWA on every send
(the form field was filled from the preset and posted back), so a stale tab
could send a value the card rejects (cntr_low), and typing in the field
silently wrote the preset. Now the store is the single source of truth and
the form field is a per-send override (Option B).
- _preset_counter_seed: an explicit `cntr` in the request wins (a hand send,
the counter probe or a pre-built packet may deliberately pick one);
otherwise the preset store's value for the packet's keyset. Wired into
/api/send-ota (the APDU path; the pre-built `sp` path keeps the caller's
bookkeeping value - the packet carries its own counter), /api/ram-install,
/api/ram-install-app, /api/cap-compat, /api/tar-probe and /api/sp-verify
(the reference must use the counter the JS packet was built with).
- the send-ota response echoes the effective `cntr` (a caller that omitted
one learns what was used) and the OTA SEND log line prints it.
- persistence is unchanged and monotonic (presets.set_counter refuses
backwards writes), pinned by tests: an explicit lower counter is used for
the packet but never lowers the store, a higher accepted one is saved.
- PWA: the Secured packet counter field starts empty with the preset's next
value as its placeholder (auto: <cntr>); typing affects that send only and
is never written to the preset (spCntrSyncPreset is gone), spParams /
getRamSpParams omit an empty counter, the RAM/send flows sync only the
local preset copy (forward-only) instead of filling the field, the +/-
buttons start from the effective value, and the preview/verify packet is
built from the effective counter (genSp). Placeholder translated EN/RU.
- the runner and /api/counter-probe keep their existing seeding (the probe
already starts at the failed value and walks above it).
- docs: api.md's optional-`cntr` contract + seeding notes on every endpoint,
help EN/RU 3.1. Tests: 822 frontend + 734 Python; sw cache simple-v393.
The script author read por.sw as the envelope SW, so a por.sw expectation
on an applet's own TAR failed with (none).
- docs/test-scripts.md: a 'The three status words (envelope SW / PoR
status / R-APDU SW)' table in the authoring section - where each one
comes from, the script field and the report row - plus a cross-reference
from the por check paragraph; help EN/RU 8.9 points at it.
- a failed por.sw check on a response_type: 'raw' decode carries the check
detail 'the response is application data - an applet's own TAR has no
R-APDU SW; assert it with data' (the PWA renders check details).
- the runner's log prints APP DATA=<hex> (no R-APDU SW) for application
responses instead of the misleading R-APDU SW=(none) data=...; the
compact/scripting lines are unchanged.
- the step editor's custom-PoR block gets a one-line hint about the same.
Tests: 821 frontend + 730 Python; sw cache simple-v391.
pySim's CompactRemoteResp was applied to every response packet, so a
third-party applet's own TAR response parsed as count=128/SW=0110/data=''
(live 2026-10-04: the alfa-dsa applet's `80 01 10`) - a fabricated status
word and a lost response.
_decode_por now takes the plaintext command script's length (cmd_len): the
compact structure's command count cannot exceed it (TS 102 226 5.1.2
Table 5.1 - each command needs at least one byte), so a larger count is
classified `response_type: 'raw'`, the secured data becomes
`decoded.last_response_data` (a por.data check matches it) and no SW is
decoded; `secured_data` is exposed in every case.
Callers pass cmd_len where they know the plaintext: the test runner's scp80
step (None for a pre-built packet; carried in ctx['last_scp80'] for the
submit-PoR path), /api/send-ota (both paths), the RAM step sender and the
counter probe; a caller without it keeps the previous parse.
Docs: test-scripts.md and api.md describe the raw fallback.
Tests: 821 frontend + 729 Python; sw cache simple-v390.
The test scripts get the pieces an applet test needed:
- scp80 check.por accepts an object {status?, sw?, data?} asserting the
decoded PoR of this very exchange (inline or via SEND SHORT MESSAGE);
the evaluation is shared with the expect-step por check
(_por_check_results). The editor's PoR select gains 'custom' with the
three fields (an empty object refuses on save).
- a new alpha content check reads the command's Alpha identifier (05/85,
Annex A coded) - the text check stays bound to the 8D Text string, so a
command carrying both keeps them distinct.
- a new sms content check asserts a SEND SHORT MESSAGE's submit TPDU:
DA / PID / DCS / UDL / UD (the parsed fields are logged and reported;
an applet's own SMS, not the OTA PoR the por check decodes).
- scp80.params.format wraps the C-APDU in the TS 102 226 5.2.1 Command
Scripting template (expanded = AA..., expanded-ae = AE 80...00 00); the
log shows WRAPPED=, the report C-APDU=<effective> format=<fmt>.
- docs: Worksheet 1 addresses an RFM TAR (B00000/B00001/B00010 compact,
B00120/B00140/B00130 expanded) with the own-TAR and MSL/spi1 notes, and
file-write is documented as a direct APDU that does not fire
EVENT_REMOTE_FILE_UPDATE.
Tests: 819 frontend + 724 Python; sw cache simple-v387.
The review of v3.18.3 found the event steps logging twice: the shared sender
writes its generic `ENVELOPE(Event Download): type=... data=...` /
`ENVELOPE SW: ...` pair, and the runner's step-annotated line repeated the
same data. `_send_event_download` gained `log=True`; the runner's envelope
and event branches pass `log=False`, so an event step logs exactly one line -
the annotated one, which already carries the step number, the event name,
the effective source and the response SW. All other callers keep their
output unchanged (netsim, the interactive event form, the BIP/timer paths).
The review's test-pinning gaps are closed:
- the shared sender's per-segment answer line
(`OTA SEND: ENVELOPE i/N -> <SW>`) is asserted in the multi-segment test;
- the scp80 step's report `sent` C-APDU/SP is asserted in the run-log test;
- the single-ENVELOPE-line behaviour (and the source override) is asserted
in the event-action test.
Tests: 816 frontend + 718 Python; sw cache simple-v386.
Verifying a script from the log was impossible: the runner wrote no card
lines, SCP80's plaintext C-APDU / secured packet / PoR landed only in the
report, and a menu selection logged nothing (the interactive path showed just
"STATUS poll (menu-select 9000)" / "STATUS -> 9000").
Every step now writes a `TEST-RUN step N:` line family to stderr, request
before response:
- generic actions: the APDU/raw event data sent and the SW/RESP received
(`APDU TX=...`, `ENVELOPE(Event Download) ... data=...`, `READ/UPDATE ... -> SW=...`);
- SCP80: `C-APDU=` (or `SP=`), `SECURED=<hex> (N B) TAR=... SPI1=... SPI2=... CNTR=...`,
the response SW, and the PoR - `PoR[inline] status=... TAR=... CNTR=... raw=...`
plus `R-APDU SW=... data=...` (with the bad-format note);
- expectations: `FETCH=<apdu> -> SW=... <raw>`, `CMD 0x.. <NAME> qual=..`,
`TR=<apdu> -> SW=...`, and `PoR[sms-submit] ...` + `R-APDU` for the SEND
SHORT MESSAGE transport;
- status: `STATUS 1/N -> <sw>` per attempt;
- menu selection: `MENU-SELECT ENVELOPE=<apdu> item=<id> ('<text>') -> SW=...`
(both the runner action and /api/menu-select; the old STATUS lines stay as
context).
The shared secured-packet sender logs each segment's answer
(`OTA SEND: ENVELOPE i/N -> <SW>`), the scp80 step's report `sent` now carries
the C-APDU/SP hex, and `--apdu-trace` remains the raw transport view.
help EN/RU and docs/test-scripts.md gained the "reading the run log" note.
Tests: 816 frontend + 718 Python; sw cache simple-v385.
The four findings from the review of the 3.15-3.18 batch:
- The event step's `_eventFieldsError` flag is cleared at the start of each
collect: fixing malformed JSON used to leave the save refused until the
editor was closed and reopened. Regression test covers invalid -> fixed.
- The script store keeps an entry that no longer validates on load (a
tightened engine rule or a hand edit): it is served, fails at run start with
the validator's message and can be fixed in the editor, instead of being
dropped from memory and erased by the next save. Mutation paths still
refuse it. (The presets store already had this behaviour.)
- Writebacks are serialized per script (`_testWriteChains`): two quick saves
of an unsaved draft no longer create two server-side scripts - the window
could be minutes while a RAM operation holds the card lock. Regression
test asserts one create + one update.
- Deleting a script cancels its pending debounced save and marks it deleted,
so a queued writeback never resurrects it; a create already in flight is
undone with a delete. Regression test covers the pending-save case.
- The event vectors moved to a shared fixture
(frontend/tests/event_vectors.json) asserted by BOTH suites - a one-sided
builder change now fails the other suite instead of drifting silently.
Tests: 816 frontend + 716 Python; sw cache simple-v383.
The events without a semantic builder (MT call, IMS registration, slices, ...)
are network-sourced, but the raw `envelope` action had no `src` override - the
only way to express them was the semantic set. `envelope` now accepts
`src` (82 terminal / 83 network) exactly like the `event` action; the step
editor exposes it and the authoring guide gets the row.
Also: the guide marks `por` as SCP80-only (the normaliser refuses it
elsewhere) and the semantic-events section names the shared src override.
Tests: 813 frontend + 717 Python; sw cache simple-v382.
The other-applet batch: a test script can send the common event downloads
semantically instead of raw hex.
- events.py: server-side mirrors of the PWA's event forms for Location status
(0x03), Access technology change (0x0B), Network rejection (0x12 - the
LA/RA/TA object selected by the registration group, the extended EMM cause
and the extended information object) and Data connection status change
(0x1D - status/type/TI plus the optional cause, host-clock 8.39 date-time,
location information, access technology, APN and PDP/PDN/PDU type). Fields
are validated before the run (a bad value is a script error, not a step
failure); `src` overrides the device-identities source (default terminal,
matching the Phone forms).
- The engine gains the `event` action kind; the runner builds and sends it.
The PWA's action-kind list stays in sync (drift-guarded - the guard itself
caught its own regex bug on the first run).
- Byte parity: the vectors are generated from the PWA's own builders and
pinned in tests/test_events.py; the frontend suites assert the same values.
PLMN and SCTS helpers are mirrored too.
- The Phone tab's event form shows the built "Event data (hex)" (updated as
the fields change), so every event without a builder can be used through
the raw `envelope` action.
- The test-step editor offers the event select + a JSON fields textarea;
malformed JSON refuses the save with a clear message.
- docs/test-scripts.md (the semantic-event table, an event example, the
format stamp), docs/api.md and help EN/RU updated.
Tests: 812 frontend + 717 Python; sw cache simple-v381.
The applet-testing batch agreed after v3.15/3.16:
- menu-select by text: the step names the item by `text` (+ `mode`
exact/contains, `case_sensitive`) instead of the install-dependent id
(both or neither is refused); the runner resolves it against the card's
cached menu and raises a step error naming the available items when nothing
(or several items) matches. The cache is refreshed on every SET UP MENU
fetch - the proactive chain and the expect step - so an applet install (new
items/ids after its REFRESH) no longer leaves a stale menu behind. The
step editor offers the id or the text + mode and the client-side pre-check
bounds them.
- TERMINAL RESPONSE object order: both builders emitted the Item identifier
before the Result (and the scripted builder its Text string before it too);
TS 102 223 6.8.0 mandates Command details, Device identities, Result,
Duration, Text string, Item identifier. `testscript.build_tr` and
`_menu_send_response` now follow it; `respond.raw` is documented as
appended after the standard objects, and the exact-byte tests pin the order.
- Text codings: the scripted response codes the GSM default alphabet via the
GSM 03.38 codec ('00' packed, '04' 8-bit) instead of latin-1, keeps '08'
UCS2 and sends the spec's null text string for an empty answer; the packing
helper is shared with the interactive path (`testscript.pack_gsm7`). A
UCS2 GET INPUT answer is documented and tested.
- docs/test-scripts.md gained the handoff brief for the applet agent: the
value-collection table, fill-in worksheets for the two applet scenarios, a
menu-by-text example, the validation checklist and a format stamp; help
EN/RU and docs/api.md updated.
Tests: 809 frontend + 705 Python; sw cache simple-v380.
The scripts lived in the browser's localStorage although only the local
server can run them. The new test_scripts.py store
(~/.pysim-simple-server/test_scripts.json, --test-scripts PATH) sits next to
the card presets: stable uuids and timestamps, atomic writes, and every
mutation is validated with the runner's own engine (the submitted shape is
kept - the normaliser's output is not re-normalisable: it fills defaults
like an 'any' PoR check that the check normaliser then rejects), so a stored
script cannot fail at run start for a validation reason. Import accepts the
old localStorage export as-is (export/import remains the migration path; the
PWA import also takes an exported array).
- /api/test/scripts (GET card-free: path/count + scripts), POST create,
/update, /delete and /import serve the store; the endpoints answer 503
without a store and 500 on a write failure, like the preset endpoints.
- /api/test/run takes a stored script_id (resolved when no inline script is
sent); the PWA sends the edited copy inline plus the id for the report,
and the run snapshot carries script_id.
- The PWA's Test script pill loads from the store, writes through on edits
(debounced name, immediate step/new/copy/delete), reports load/save/delete
failures inline, and exports the portable {name, steps} shape.
Tests: 808 frontend + 701 Python; sw cache simple-v379.
Three gaps blocked SCP80 applet testing from the PWA:
- testRunPreset() still marshalled the pre-v3.8 flat preset fields
(kic/kid/keys/counter/tar/spi1/spi2, all empty on a stored preset), so
every SCP80 run failed with "SCP80 preset is incomplete: no keyset is
defined". The PWA sends the matched preset's id now and the server
resolves it from the store (_test_run_preset_from_body; the inline
`preset` body stays for API callers), so a run always uses the stored
keysets, TARs and counters. Regression tests on both sides.
- testscript._normalise_params dropped the scp80 step's `kvn` (the editor
exposed it and the runner and validation consumed it, so scripts
silently used the preset's first keyset). kvn is validated (1-15) and
passed through; the client-side problem check bounds it too.
- The PoR delivered as a SEND SHORT MESSAGE (PoR-in-submit, SPI2 bit 0x20)
is decoded for the expect step that fetches it: the new `por` content
check asserts the response status / R-APDU SW / response data, decoded
with the preceding scp80 step's context (concatenated SMS accumulate
across expectations). The inline transport stays on the action
(check.por / check.data).
- The new `files` content check asserts the File List of a REFRESH
(TS 102 223 8.18, tag 12/92) - e.g. qualifier 00 = NAA initialization
with full file change notification - as an order-insensitive set of FID
paths.
The step editor exposes both checks; help EN/RU, docs/api.md and the new
authoring reference docs/test-scripts.md document the format. Tests: 803
frontend + 680 Python; sw cache simple-v378.
The ladder only advances on cntr_low; any other verdict stops the search.
A stop on a non-por_ok verdict after at least one cntr_low keeps the value
anyway - the earlier rejection proves it is above the card's counter - but
the response reports success: false with counter_saved, the verdict and the
saved counter ("something is likely wrong with the security settings");
the PWA shows it amber. Without a prior cntr_low nothing is saved, and a
missing PoR stays an error. actual_response_sms_submit/ussd count as
accepted.
Docs: docs/api.md, repo AGENTS. sw cache simple-v377.
Tests: 672 Python + 798 frontend green.
_counter_probe_params validates SPI2, forces b1 (PoR required; a caller's
00 becomes 01) and defaults to the RAM listing transport 21; the no-PoR
error names the effective SPI2, and ramSyncCounter posts
ramListingSpi2('40') for the RAM view (the failed operation's transport).
Live 2026-10-02 (NP BAP): the probe had sent the plain SCP80 form's 00
(no PoR) - the card answered the ENVELOPE 9000 and sent nothing, so the
probe stopped after one packet with "card verdict: no PoR".
Docs: docs/api.md, repo AGENTS. sw cache simple-v376.
Tests: 670 Python + 798 frontend green.
An audit of every event form against the pinned specs (31.111 7.5.x/9.3,
102 223 8.87, TS 101 220's master tag table) found three missing objects,
three malformed/wrong ones, and settled the slice-data scope.
- 0x00 MT call: the IMS URI object is cut at 100 bytes and now carries the
URI truncated object (8.135, F3 00) when the cut happened.
- 0x1F Slices: the form gains the Partial NSSAI object (8.154, F9, rel 18);
a single envelope carrying it is marked as the Last Envelope (8.79,
F0 00) automatically (7.5.27.2).
- 0x06 Card reader status and 0x07 Language: the builders now emit their
object tags (A0 01 ..., AD ...) - they emitted bare values before.
- 0x18 Incoming IMS data: the IARI tag is F6 (76/F6), not F7 (which is the
IMPU list tag - the two-column 9.3 table had been misread).
- Single-envelope mandate: the event data is capped at 244 bytes (inner 252;
the D6 long-form length and the APDU Lc stay in one byte). The server
refuses more with a 400 and the PWA shows the size error before sending.
Chained (multi-envelope) delivery, the More Data object and envelope
sequences are not implemented - documented in the help and the repo AGENTS.
- Tests: event form vectors (URI truncation, the restored tags, partial /
Last Envelope, the size helper) and the server guard; the release
reference and its PWA/code mirrors gain the three objects and the
corrected IARI key.
- sw cache simple-v375.
The keyset table's column is headed "Counter (hex)" with the placeholder
0000000001, and cardsAdd refuses a save whose counter is not 1-10 hex
digits (empty included; whitespace stripped) - the same rule the store
enforces. The store keeps its import-compatible empty -> 1 default for
API/import callers.
Docs: repo AGENTS (v3.13.4 note). sw cache simple-v374.
Tests: 667 Python + 797 frontend green.
elfTagListRetry walks the untried tag-list forms for P1=10 and P1=20
(skipping combinations the main pass already refused via the expandedTried
map; only the tag-list forms are retried - the no-tag-list form never
carries CE - and the walk stops as soon as a version appears). The form
memory can skip the tag-list forms for P1=10 when the Apps listing served
only the no-tag-list form (live 2026-10-02: EP BAP - its P1=10 tag lists
were never queried while the P1=20 retry refused them).
elfPerAidVersions filters to packages that actually have an applet
candidate before the six-query cap: the budget counts queries, not list
positions (EP BAP's first six packages are Oracle/JC-API entries with no
app instances - they consumed the cap and the A113 packages were never
queried).
Docs: help EN/RU, repo AGENTS (v3.13.3 note). sw cache simple-v373.
Tests: 667 Python + 796 frontend green.
ramDeriveElfVersions matches an applet instance to its package through a
shared ramElfAppMatch: the app's C4 (Load File AID) when the card reports
the real one, then the package's module AIDs (the applet instance AIDs),
then the shared-prefix fallback (the same tiers ramElfAppletCandidate uses
for the per-AID queries). Live 2026-10-02 (test-eSIM): the card returns
C4 = the applet's own AID (c4 10 ...3908 for package ...3900), so the old
C4-only derivation filled nothing; the module lists map ...3900 -> ...3908
(9.3), ...0200 -> ...0208/...494D4508 (1.1) and F0414C46416001 ->
F0414C4641600101 (0.1).
The ELF version hint names the remaining case: a package without an
applet instance has no version to derive either (the Oracle
A00000006203010101 stays bare - the card refuses every ELF tag-list form,
so its CE is unreachable).
Docs: help EN/RU, repo AGENTS (v3.13.2 note). sw cache simple-v372.
Tests: 667 Python + 796 frontend green.
The explorer's next-occurrence page (P2=03) is retried in the other
command formats (ramPageFormats: the expanded codings first - the serving
one first when it is expanded - and the compact command string last,
because a compact page attempt can consume the page without delivering
it) and the format that serves a page is kept for the following ones.
Live 2026-10-02 (test-eSIM card): a compact page 2 answered 61B6 and the
chained GET RESPONSE 6A86, after which the AA and AE 80 retries both saw
the occurrence already gone; the AA-wrapped page returns 182 B with the
remaining app instances' CE/CC/EA, while AE 80 is refused. A page that
no format serves ends the listing.
Only an explicit 6310 promise counts for the "(first page only)" flag
(ramExpandedMore): a probe after a 61xx page that every format refuses is
the card's final answer, so that card's ELF listing is no longer flagged
(its expanded registry has three entries; the fourth package exists only
in the compact listing - the ELF tag-list forms and per-AID queries are
refused in every format).
In Auto the explorer also queries entries the bulk listing left without
expanded fields individually by AID (ramAppsMissingDetails, <= 6 packets,
the compact command string carries the GET RESPONSE for 61xx).
Docs: help EN/RU, repo AGENTS (v3.13.1 note). sw cache simple-v371.
Tests: 667 Python + 794 frontend green.
The consumption half of the release guard: the event-download forms hide the
parameters introduced after the effective release and say so.
- catEffectiveReleaseInfo(cards, iccid): the equipped card's preset (ICCID
match, the same rule the SCP80 views use) resolved through presetRelease(),
else the default Rel-12.
- eventFieldsForRelease(cfg, rel): a field whose introduction release (`rel`)
is above the effective one is hidden; a field without a known release is
never hidden. The EVENT_FORMS annotations verified against the pinned
specs/histories: the MT call IMS URI (Rel-12, CR 12.4.0 "URI support in MT
Call event"), the CSG cell selection PLMN ID (Rel-12, 12.1.0), the IMS
registration IMPU list + status code (Rel-11), the slices S-NSSAI-mapping
and rejected objects (Rel-18).
- The form notes what was hidden: "hidden parameters: N · introduced after
Rel-12 · preset: X" (or "default release"), with a tooltip naming the
source; the send path already skips absent fields, so no builder changes.
- help EN/RU; sw cache simple-v369.
The release selector lives in the preset rather than a global chip: presets
already travel with the card (ICCID auto-selection, export/import), and the
operations that will consume the release are preset-aware.
- presets.py: the optional `release` field (4-18; empty = unspecified) joins
PRESET_FIELDS; a value outside 4-18 is refused on save/import; the store
schema version is 5.
- catrelease.py: DEFAULT_RELEASE = 12 and preset_release() - the effective
release is the preset's own value, else Rel-12 (the safe level for cards
whose release is not known; an unset release never filters anything away).
The PWA mirrors both (CAT_RELEASE_DEFAULT + presetRelease()), drift-guarded.
- Cards tab: the editor's header row gains a compact CAT release select
(unspecified / pre-Rel-6 stored as 5 / Rel-6 ... Rel-18); the empty option
names the Rel-12 default and the tooltip explains the guard; the field is
collected, cleared and restored with the other form fields.
- Nothing filters yet: the Simulator's event parameters (stage 3) will use
the effective release.
- docs/api.md + help EN/RU updated; sw cache simple-v368.
The Cards tab now shows the preset list by default; "Add preset" / "Edit"
open a separate editor view (Save stores and returns to the list, Cancel
discards; ramGoToPreset opens it too). The editor keeps the name/ICCID
header (with From card) and groups its fields into bordered blocks:
- PIN/ADM: the new optional card codes PIN1/PUK1/PIN2/PUK2 (plain text,
4-8 decimal digits) plus ADM, moved out of the top row; nothing consumes
the PIN/PUK codes yet.
- TAR: one uniform table (TAR, MSL, description); the first three rows are
the fixed role entries with the immutable English descriptions "ISD
compact format" / "UICC shared FS RFM compact format" / "ADF FS RFM
compact format"; further rows are deletable with an optional description.
- SCP80 (keyset editor) and SCP81 (PSK pair) as before.
Store: PRESET_FIELDS gains pin1/puk1/pin2/puk2 (optional; whitespace
stripped; 4-8 decimal digits validated on save and import), SCHEMA_VERSION
4, docs/help/AGENTS updated. TAR rows use unified ids (cards-tr-N-*), the
editor switches via cardsShowList/cardsShowEditor.
Tests: 665 Python + 783 frontend green; the whole inline PWA script
syntax-checked. sw cache simple-v361.
Presets drop the card-wide SPI1/SPI2 and the fixed tar/uiccTar/usimTar
fields: a preset now carries `tars` - the three mandatory role entries
(isd/uiccRfm/usimRfm, spec defaults pre-settled) plus free TARs with an
optional description, each with its MSL (Minimum SPI1, TS 102 226
8.2.1.3.2.4). v3.9.1 presets convert on load/import (the spi1 seeds all
three MSLs); duplicate TARs and empty TAR/MSL values are refused; the
store schema version is 3.
Operations derive a packet's SPI1 from its TAR's MSL (_spi1_for_tar): the
RAM ops, the test runner (per-step overrides still win), the counter probe
and each TAR-probe row; the plain send keeps an explicit SPI1 with a
`warning` when it is below the MSL, and a TAR outside the preset without an
explicit SPI1 is refused with a hint. The TAR probe resolves per checked
TAR before sending and reports the effective spi1 per row. The secured
packet form's SPI2 default is 00 (the RAM/probe operations pin their own).
PWA: the Cards form edits the TAR table (role rows with MSL inputs plus
Add/Remove free rows with a description), the list shows a TARs (MSL)
column, the SCP80 TAR field suggests the preset's entries (datalist) and a
preset apply seeds the SPI1 from the operation TAR's MSL with an amber
warning below it; the preset-wide SPI1/SPI2 fields and the header marker's
SPI requirement are gone (completeness = a keyset + the three role entries
with their MSLs). Help EN/RU, docs/api.md and AGENTS updated; sw cache
simple-v358.
Live: TAR probe 000000 at its MSL 16 (registered, por_ok, counter
advanced); a send without spi1 derived 16 (por_ok, counter advanced); a
send with spi1 0A returned the warning and the card refused it (6200, no
counter consumed); an unknown TAR without spi1 was refused with the hint.
- The probe no longer takes a caller-supplied `apdu`: it always sends the
read-only SELECT MF (the counter advances on the packet's security
acceptance whatever the applet answers - 6A86/6D00 are normal there), so
no caller can turn the sync probe into a write.
- Version 3.9.1: server VERSION, pyproject.toml and the PWA header; sw cache
simple-v357; docs/api.md and the repo AGENTS.md updated, and the workspace
AGENTS.md gains the v3.9.1 history entry (its "Currently" line was stale at
v3.7.1).
Gating: the SCP80 "Send to Card", the RAM Execute and the TAR-probe Execute
buttons carry `data-needs-keyset`; pysimApplyAvailability() disables them
(with the hint "Select a card preset and its keyset" when the card itself is
fine) unless the view's preset is selected and the form's keyset number is one
of its keysets - `spKeysetStartReady`, the same rule the click-time guards
enforce, which stay as the last line of defence. spKeysetSync() refreshes the
gate on every preset/keyset change, and the KIc/KID index selects now call
spKeysetSync() so the keyset selector follows a manual index change too.
Version 3.9.0: server VERSION, pyproject.toml and the PWA header; sw cache
simple-v346; the workspace AGENTS gains its v3.9.0 history entry.
Tests: indicator.test.js drives the gate (no preset -> disabled with the hint,
an undefined keyset -> disabled, a matching keyset -> enabled) and guards the
three buttons' attribute; the cards/keysets/ram sandboxes stub
pysimApplyAvailability. Help EN/RU notes the disabled start buttons.
The presets lived in the browser's localStorage and the PWA wrote the SCP80
counter back after every operation, so an increment could be lost when the
response never reached the tab, when two browser contexts (or the demo origin
plus a local one) held separate copies, or when the tab was closed mid-run.
The counter is card state and the server performs every card operation, so the
store now lives next to the server:
- pysim_simple_server/presets.py: one JSON file
(~/.pysim-simple-server/card_presets.json, --card-presets overrides; Path.home()
resolves the same way on Windows), atomic writes (temp + fsync + os.replace),
an RLock, stable uuid ids, the ICCID normalisation the PWA uses (digits /
spaced / raw EF hex), a duplicate-ICCID refusal and a monotonic set_counter;
every counter change is appended to card_presets.json.audit.jsonl.
- API: GET /api/presets (card-free), POST /api/presets and
/api/presets/update|delete|import; the import also takes the old localStorage
export shape - that is the migration path, there is no automatic migration.
- Operations name a preset_id and the server persists the counter they
consumed: /api/send-ota (the plain SCP80 path reports final_cntr now too),
the RAM install/install-app/compat steps (_ram_send_gp_apdu) and the test
runner's SCP80 steps (_preset_counter_persist).
- PWA: the Cards tab is a thin client of the store (load on connect, CRUD via
the API, export/import), the counter write-backs became local display syncs
(the SCP80 form's counter input stays a deliberate human edit) and the
SCP80/RAM bodies carry preset_id; a new pysimFetchOk() surfaces the server's
error bodies instead of silently using them.
Policy: card keys in logs and local files are not a risk for this workbench
tool (AGENTS.md) - the store is not encrypted and no redaction is required.
Tests: tests/test_presets.py (store: ICCID forms, counter monotonicity and
wrap, atomic writes, corrupt-file recovery, import), the preset endpoints in
tests/test_fetch_routes.py (incl. the counter persistence via /api/send-ota)
and the updated PWA tests. sw cache simple-v334.
Two bugs in the v3.7.0 per-AID fallback, both visible in the live log
(2026-09-30 11:21):
- the candidate applet was searched by the AID prefix, but the applet
instance AIDs are the package's module AIDs (package A113...0200 has
modules ...0208 / ...494D4508, both present as applet instances - they
differ from the package AID in the last byte), so that package produced no
query at all. ramElfAppletCandidate (pure) prefers the module AIDs and
keeps the shared-prefix rule as a fallback;
- the single-AID expanded query answered 6134 (the card holds the data) and
the empty response was read, so no version was derived. The query is now
retried with the GET RESPONSE chained into the compact command string
(ramChainGetResponse) exactly like the ladder - a standalone GET RESPONSE
answers 6700 on this card.
Tests: the module->applet mapping with the live AIDs (incl. the versioned
applet being skipped and the prefix fallback), plus the source guards for the
chained retry.
sw cache simple-v333; tests: 557 Python / 717 Node.
catarrh