catarrh/simtrace2
1
0
Fork 0
mirror of https://gitea.osmocom.org/sim-card/simtrace2.git synced 2026-03-17 13:48:32 +03:00
Code Issues Packages Projects Releases Wiki Activity

Compare commits

base: catarrh:laforge/cardem2
Branches Tags
catarrh:master catarrh:lynxis/presence-pol catarrh:laforge/rp2040-wip catarrh:laforge/202201 catarrh:lynxis/wip catarrh:osmith/wip catarrh:laforge/ngff-cardem catarrh:laforge/tool catarrh:laforge/cardem2 catarrh:laforge/cardem1 catarrh:laforge/cardem catarrh:hoernchen/simtrace_cardem catarrh:laforge/wip catarrh:kevin/cardem catarrh:kredon/simtrace catarrh:v0.3 catarrh:christina/master
catarrh:0.9.0 catarrh:0.8.2 catarrh:0.8.1 catarrh:0.8.0 catarrh:0.7.1 catarrh:0.7.0 catarrh:0.6.1 catarrh:0.6 catarrh:0.5.1 catarrh:0.5 catarrh:0.4 catarrh:0.3 catarrh:0.2 catarrh:0.1
...
compare: catarrh:lynxis/presence-pol
Branches Tags
catarrh:master catarrh:lynxis/presence-pol catarrh:laforge/rp2040-wip catarrh:laforge/202201 catarrh:lynxis/wip catarrh:osmith/wip catarrh:laforge/ngff-cardem catarrh:laforge/tool catarrh:laforge/cardem2 catarrh:laforge/cardem1 catarrh:laforge/cardem catarrh:hoernchen/simtrace_cardem catarrh:laforge/wip catarrh:kevin/cardem catarrh:kredon/simtrace catarrh:v0.3 catarrh:christina/master
catarrh:0.9.0 catarrh:0.8.2 catarrh:0.8.1 catarrh:0.8.0 catarrh:0.7.1 catarrh:0.7.0 catarrh:0.6.1 catarrh:0.6 catarrh:0.5.1 catarrh:0.5 catarrh:0.4 catarrh:0.3 catarrh:0.2 catarrh:0.1

142 Commits
laforge/ca ... lynxis/pre

Author SHA1 Message Date
Alexander Couzens
c79b582000 simtrace2-cardem-pcsc: allow to set sim presence polarity 
Add api call osmo_st2_cardem_request_config2(struct cardemu_usb_msg_config *)
which contains a full cardemu_usb_msg_config.

Change-Id: Iacde63e667472a85a5f18cb4ca99dcfa1a84dd59
 2024-06-03 13:59:38 +02:00
Alexander Couzens
504c0fab50 firmware: allow to change the sim presence pin polarity 
The sim presence pin allows the simtrace2 to inform the modem
about the presence of the simcard. On a generic simcard slot a
button is pressed by the simcard which generate a high or low voltage level.
Even there are specifications of minipcie or ngff defining this signal, certain
modems behave different.
Certain modems require different signals from the specification.

Extend the usb protocol to set the behaviour at runtime.

Change-Id: I77118114ba873fdf0778137402888b40f2442456
 2024-06-03 13:59:22 +02:00
Alexander Couzens
2fd8d3c18c dissector: add support for sim polarity 
Change-Id: If3ae350d0f4d737bc9e80c4f5d73cc1a39d076af
 2024-05-31 16:31:17 +02:00
Alexander Couzens
d405133672 ngff_cardem: cosmetic: fix superflous space 
Change-Id: Ib155d5778a0df7865958ab65fe2ce48b44f4326d
 2024-05-22 15:09:23 +01:00
Oliver Smith
69deee859f contrib: remove rpm spec file 
Related: https://osmocom.org/news/255
Related: OS#6446
Change-Id: I0cc8d753b26648efa7c9fb5798f7c4227c328547
 2024-05-08 14:41:11 +02:00
Harald Welte
3fbed27b7a README.md: Add section on ngff_carem 
This board has been around for ages and is supported from fimware + host
software.

Change-Id: I586b170fd6314af53a90d09020e41114714f1fec
 2024-03-23 12:05:10 +01:00
Harald Welte
b0d66ebfb0 README.md: Add links to where hardware can be bought 
Change-Id: I0b990513153d60c0d70ca29b7243cf7a10c49575
 2024-03-23 12:04:10 +01:00
Harald Welte
26517d89de README.md: add links to SIMtrace2 and QMOD 
Change-Id: I6279765db0fdf92487a47f3ada28e4f49dd6e881
 2024-03-23 12:03:45 +01:00
Harald Welte
6d2d1eeb36 README.md: Fix mark-down nested bullet syntax 
Change-Id: I0b5a4cc00be4a8adba2797092fca41b99b336b79
 2024-03-23 12:03:07 +01:00
Harald Welte
651987ae62 README.md: Fix mark-down nested bullet syntax 
Change-Id: I252fa946010a2750d268b604d72e070ada99931c
 2024-03-23 11:33:03 +01:00
Harald Welte
ec157679d6 Add funding link to github mirror 
see https://docs.github.com/en/repositories/managing-your-repositorys-settings-and-features/customizing-your-repository/displaying-a-sponsor-button-in-your-repository

Change-Id: I8be9c11198d09be628994ab0f530b5666fd25a7f
 2024-03-23 11:32:23 +01:00
Oliver Smith
e6e77399d6 firmware/Makefile: don't use distribution's CFLAGS 
Set CFLAGS on top of the Makefile, to avoid using the distribution's
default CFLAGS. In debian testing and unstable, -fcf-protection was
recently added to the default CFLAGS, but it cannot be used with the
cross compiler:

  [COMPILING libosmocore/source/backtrace.c]
  cc1: error: '-fcf-protection=full' is not supported for this target
  make[2]: *** [Makefile:270: obj/simtrace/flash_backtrace.o] Error 1

Change-Id: I5f7cd0402f9bb85dd600204fdf8855773ddbeb70
 2023-09-13 15:33:48 +00:00
Philipp Maier
1f77d673e2 simtrace2-cardem-pcsc: mark reset events in GSMTAP trace 
At the moment only APDUs are logged to GSMTAP. It is not uncommon that a
card is resetted by the UE multiple times during normal operation. When
the trace lacks the reset events (ATR) it becomes difficult to follow in
which state the card actually is. Let't mark reset events by sending the
ATR via GSMTAP (like simtrace2_sniff already does it)

Related: OS#6094
Change-Id: I6b4d82b6ee369c95eeca8f7d59478452395fbe54
 2023-07-21 13:03:38 +02:00
Harald Welte
da078c090b Fix unchecked return value of osmo_libusb_init() 
Fixes: CID#307501: Unchecked return value (CHECKED_RETURN)
Change-Id: Ic1f600dfd44d15da165a17d84f0faab6f6fd69c3
 2023-07-18 15:04:24 +02:00
Oliver Smith
968d0b94f6 contrib/jenkins: tweak shell logic 
Move the logic down to where make gets called, so we don't need the
variable. Print whether we use CLANG or GCC.

Don't put /opt/llvm-arm/bin infront of PATH unless building with CLANG.
Right now it doesn't seem to have e.g. an override for gcc, but the
files in that path may change when we update
LLVM-embedded-toolchain-for-Arm.

Related: OS#6026
Change-Id: Id768e0dbed9265f042b942e6699683723ca40a7c
 2023-05-16 10:13:30 +02:00
Eric Wild
749dcdc277 fw: only build the bl with clang 
-Oz breaks cardem, so just build the bootloader with clang.

Closes: OS#6026
Change-Id: Idb9e9a024fb8bfec28ff479c254ea73be0c8ef82
 2023-05-15 16:37:35 +02:00
Oliver Smith
f52b8b1a2e debian: set compat level to 10 
Set --no-parallel, as in v10 debhelper defaults to parallel building.
This is apparently not supported by simtrace2's Makefile, it leads to
multiple non-trivial build errors. In contrib/jenkins.sh we also don't
build multiple firmwares in parallel.

Related: OS#5958
Related: https://manpages.debian.org/testing/debhelper/debhelper-compat-upgrade-checklist.7.en.html
Change-Id: I49fcc4fe9d3e795f8c3514d35ff3e2beca2917d1
 2023-04-26 11:33:51 +02:00
Oliver Smith
68b072bcc8 debian/rules: remove override_dh_autoreconf 
The Makefile already runs autoreconf -fi in the "utils" target:

  utils:
  	(cd host && \
  	 autoreconf -fi && \
  	 ./configure --prefix=/usr --disable-werror && \
  	 make)

The override is not useful, as it leads to debhelper running autoreconf
as well, but without running ./configure and make in the host directory
afterwards. So autoreconf just runs twice.

I've also considered to change debian/rules to only run the "fw"
target, and not the "utils" target of the Makefile. But that only makes
it more complex, as debhelper would then need to run make twice, once in
the root directory (as "make fw"), and once in the host directory. We
would need to add several lines to debian/rules to do effectively the
same thing.

Make this change now, as "cd host && dh_autoreconf" doesn't work with
debhelper compat level v10 anymore (--sourcedir could be used instead,
but as mentioned above, it's not useful).

Related: OS#5958
Change-Id: I12f379b4ec2de6adc86557d89319ab1d04ed5e73
 2023-04-26 11:33:43 +02:00
Oliver Smith
6778c3f46e Cosmetic: fix CI errors 
* Fix UTF-8 encoding. This caused the endianness check to fail, which
  reads all .c and .h files.

* Add .checkpatch.conf to skip linting for:
  firmware/atmel_softpack_libraries

Change-Id: Ibb2e42e9b4307275a33e4000c201847a6bd60137
 2023-04-25 17:53:11 +02:00
Eric Wild
773d314142 contrib/jenkins.sh : build and publish combined targets 
This makes production a bit easier.

Related: OS#5722
Change-Id: I32f9a0213aaefa50232a3d8dc2e7a4f2f44dbae1
 2022-11-22 21:54:26 +00:00
Harald Welte
0c8cb51849 firmware/sniffer: Enable interrupts for overrun/parity/frame errors 
We so far didn't have interrupts enabled for those, and just caught
them "by accident" if a byte was received or if a timeout happened.

Let's explicitly enable those interrupts so we also catch those
conditions by themselves.

Change-Id: Ia27f537706b9a6252dd18175545c6f27a7d17d0e
 2022-11-19 09:02:23 +00:00
Harald Welte
89da837c23 firmware/sniffer: introduce #define for interrupt enable flags 
Change-Id: Id4bc720a1db31b4433ff7b10d7a57d0ddb7d7180
 2022-11-19 09:02:23 +00:00
Harald Welte
67a6d5724c firmware/sniffer: Handle WT timeouts via ring-buffer 
Before this patch, all UART characters went through a fifo/ringbuffer
of depth 512, while events like timeout were delivered directly via
a global flags variable from ISR to main code.  This means that one or
more correct/complete TPDUs could theoretically still be in the FIFO,
but the "Fast path" of the timeout handling is pre-empting that and
messing with the state machines.

All events from the UART should be delivered via the ring-buffer to make
sure they arrive in order at the main function.

The old "report timeout via change flags in separate USB message" code
is left in place.  On the USB protocol we should keep it for
compatibility.  Internally we should probably also migrate that over
to the new ring-buffer method in a second step.

Change-Id: I4434c6fcd59d1a425e9ded734bbc8b0411a0a0d8
 2022-11-19 09:02:23 +00:00
Harald Welte
61394cde29 firmware/sniffer: Pass PARITY/OVERRUN/FRAMING error via ringbuffer 
those kind of errors should be passed to the main loop for further
processing, in-order together with the byte stream received from the
USART.

Change-Id: Iebd9bbc97c2a5a0c402e7a2711520299a1ade568
 2022-11-19 09:02:23 +00:00
Harald Welte
92c44c572e firmware/sniffer: Add + use 16bit ringbuffer 
So far, we use a uint8_t ring buffer as "FIFO" between USART Rx
interrupt and main context.  That's fine for expressing the bytes we
receive.  However, if we also want to report USART errors synchronously
in that stream, we actually need more bits to express those.

Reporting USART errors via the ring buffer is the only way how the
sniffer code can know in which TPDU the error occurred.  Reporting them
any other way (global variable, ...) would loose the timing relationship
where in the received stream the error occurred.

This change just changes the ringbuffer from 1024-entry 8bit to
512-entry 16bit and doesn't add any error reporting.

Change-Id: Ifde054fbfe7f753b61e7d3409c56eca6e0faeb4b
 2022-11-19 09:02:23 +00:00
Harald Welte
4237c99fa2 firmware/sniffer: Disable TIMEOUT interrupts in USART IER on exit 
Not critical (we disable the USART interrupts in NVIC anyway), but
if Sniffer_init() enables this flag, it's good style for Sniffer_exit()
to disable it.

Change-Id: I92e16a160d60fcab33c81e0cf074088b9f20b9ae
 2022-11-19 09:02:23 +00:00
Harald Welte
3812317fba firmware/sniffer: Rename global variable 'wt' to 'g_wt' 
It's a bad idea to have a two-character global variable which might
easily clash with local variable names.

Change-Id: Ic2fac64129d2772a1923f35e48582be3b130a0f2
 2022-11-19 09:02:23 +00:00
Harald Welte
c472e33320 firmware/sniffer: Log cause of WT change 
Change-Id: I14245c0ca96a258146e48bb9909efd9f8150f5ac
 2022-11-19 09:02:23 +00:00
Harald Welte
716fe6cefa firmware/sniffer: Group global variables in structs 
This is a purely cosmetic change that groups PPS, TPDU and ATR related
global variables into structs.  The structs get g_ prefixes to indicate
a global variable.  This avoids confusion between very short/generic
variable names that might clash with local variables.

Change-Id: I3e02f6c6b063ebc860b7a2a54dfc6051f1ea584f
 2022-11-19 09:02:23 +00:00
Harald Welte
432c7b5058 firmware/sniffer: Make all global variables 'static' 
None of those variables are used outside sniffer.c, so they can all be
static.

Change-Id: I8946acb6189d5ade57214295f0ba87f0608bad92
 2022-11-19 09:02:23 +00:00
Harald Welte
db1e37b93b firmware/sniffer: Fix programming error in PPS 
process_byte_pps() would never enter the error path in which the
first byte would be != 0xff.  However, the caller already verified
this before calling process_byte_pps() so the error path should
never be hit anyway.

Change-Id: Ia74b6338219a6965e6bd35a6efcf369890e02d81
 2022-11-19 09:02:23 +00:00
Harald Welte
cc295f6945 firmware/sniffer: Avoid extra call for rbuf_is_full 
rbuf_write() will tell us in the return value if the buffer was full
(error) or not (success).  Let's use that return value rather than a
theoretically race-y call to rbuf_is_full() before.

It's theoretical as the write happens from IRQ context and the read from
normal process context, so the fill-level cannot really change while
we're in the USART interrupt.  So it doesn't fix a bug, just improves
coding style and also avoids an extra function call + irq-disable/re-enable.

Change-Id: Icf570d0aa48d67a19e63c6e2b6caa14438fe88e3
 2022-11-19 09:02:23 +00:00
Harald Welte
4836f23fa3 firmware/sniffer: Log old and new state in ISO7816-3 state changes 
Change-Id: Iddb460cc2ad02c11a74de10dab127bb14cee9605
 2022-11-19 09:02:23 +00:00
Harald Welte
c343995b2d firmware/sniffer: refactor setting TPDU state 
In low-level debugging it might be useful to trace the TPDU state
changes, so let's factor-out the state-setting as a function that
can be amended with printf() or GPIO toggles or the like.

No logical change is introduced here, just assignments replaced with
calling a function that does the assignment. compiler should inline
that.

Change-Id: Ie61321404f3686234c61c68a07d6cb9f5830ddc1
 2022-11-19 09:02:23 +00:00
Harald Welte
0190e45305 firmware/sniffer: Log parity errors, just like overruns and framing errors 
Reading of code + datasheet showed that we did enable parity checking
but never actually checked if the USART has the PARE bit in CSR set.

Let's change that.  Plus also avoid possible race conditions due to
multiple status resets via US_CR_RSTSTA.  Let's only reset that once
per interrupt handler.

TODO: actually do something useful at that point.  We currently don't
report those to the host, nor do we attempt to recover in any way.  The
data sheet also doesn't tell us what it actually does in such
situations; it appears the character is *not* returned from the USART,
so we're missing one byte in the stream at that point.

Change-Id: I5f012d86c61a2377d355396e7b95d078952bee7c
Related: OS#5464
 2022-11-19 09:02:23 +00:00
Eric Wild
cfab7c00ce conrtrib/upload : upload elf files 
Due to popular demand people want elf files that can be loaded to get
debug symbols, so publish the elf file, but not the stub-less bin file.

This elf file can ONLY be used to look up symbols, it should NOT be
"load"ed into flash, because the preceding crc stub has to match. Mixing
older crc stubs that are still in flash and newer elf files means the
device will end up in DFU mode upon reset.

Change-Id: Ifceb16d385388356ac1bf8b13f5df62c643bebf8
 2022-11-16 10:48:29 +00:00
Harald Welte
5523faf61f firmware/sniffer: Fix copy+paste when logging invalid INS bytes 
Change-Id: I2679415f1853d4b4a33fca33791fb0bfc6908a1b
 2022-11-15 21:19:26 +01:00
James Tavares
5f651e510f Fix missing generation of waiting-time-extension in some situations 
In the function set_tpdu_state(), there is a missing transition to
WAIT_TX state. This is fine if you are coming from the WAIT_PB state,
which has already restarted the waiting timer via
card_emu_uart_update_wt(), but if you are coming from the WAIT_RX
state, then card_emu_uart_update_wt() is never called and the USART
timer is never restarted.  (Because the transmitter is left enabled in
WAIT_RX, the response is still sent to the modem; it is just the
half-wait timeouts that are missing).

Change-Id: Ib4eb964c073192e8f067004625af818ba2caf003
 2022-11-14 19:57:41 +00:00
James Tavares
6eb5e8b602 main: rotor: erase immediately after send 
- improves trace diagnostic output by moving cursor back over the
the rotor before a diagnostic message has a chance to be printed.
there is still a race condition, but it is much better.

Change-Id: Iad7767f2a5dbbd67b0f33b9bfc2c3864ce308990
 2022-11-13 22:07:48 -05:00
Harald Welte
2b175c9545 cosmetic: Fix compile-time #error message string typo 
Change-Id: Ibf304751f8debe8567bed1614e62b60cf33ec092
 2022-11-11 22:32:13 +01:00
Oliver Smith
139d517bc1 contrib/jenkins.sh: set USE_CLANG=1 
As the bootloader goes beyond partition size in modern gcc, use clang
instead.

Depends: docker-playground Ib82a53fa7edc62d21e772efbb9b2c049d1b50c4d
Related: OS#5260
Change-Id: I2aa2e20e75e334560dbe1f6db9fd1491873ff91f
 2022-10-13 13:03:20 +02:00
Harald Welte
a5d537973d cardem: reset the uC in case of USB disconnect 
This fixes the firmware USB interface somehow getting stuck
after a USB disconnect/reconnect without power cycle.

Right now there are a number of things we only execute the first time we
reach USBD_STATE_CONFIGURED, but not at any subsequent such event.

It's also rather clear that this doesn't really show in simtrace2 as it
is bus-powered. And it doesn't show on OWHW as we don't have any USB
unplug situations of the USB between the on-board traces of USB host and
SAM3S.  So this really only is relevant to QMOD.

A cheap and dirty work-around is to simply reset the entire uC every
time a USB unplug happens.

Change-Id: I6678bb2192c1419ed388b46c4ae7aa1ce18dc7ee
Related: OS#5578
 2022-07-25 20:00:54 +02:00
Vadim Yanitskiy
fdfb02418f host/cardem: fix integer overflow in process_do_rx_da() 
osmo_apdu_segment_in() may return a negative number on receipt of
"unknown APDU case", and that would crash simtrace2-cardem-pcsc:

  msgb(0x55d2cf7aa8a0): Not enough tailroom msgb_put
    (allocated 920, head at 0, len 7, tailroom 1017 < want tailroom 65534)
  backtrace() returned 19 addresses

Whenever osmo_apdu_segment_in() fails to recognize an APDU, the
communication is broken, because we don't know if we should continue
transmitting or receiving.  Only a successful return value by would
allow us to know this.  Do not crash, exit() gracefully.

Change-Id: I9e97b955a28ec886a429d744f9316e7e71be4481
Related: OS#5600
 2022-07-11 16:30:47 +07:00
Harald Welte
e4503232eb update git URLs (git -> https; gitea) 
Change-Id: Ifcc942c265edc983214e4efc0bc93ee8bd1b55f4
 2022-06-17 21:06:45 +00:00
Harald Welte
9088ca86ff simtrace2-cardem-pcsc.c: Send APDUs via GSMTAP 
Previously, only simtrace2-sniff generated GSMTAP protocol traces.

Let's add the same functionality to simtrace2-cardem-pcsc.

Change-Id: Iba6adf41b480d127bf11ee361c66d80fe8296313
Closes: OS#5494
 2022-04-05 17:29:20 +00:00
James Tavares
ff434e4f12 firmware: bugfix: disable cardemu comms in local SIM mode 
This change prevents contention on the ISO7816 bus by disabling the card emulation state machine when the SIM switch is in the local mode. Without this change, the card emulation firmware can clobber ISO7816 communications and cause contention with certain (but not all) SIM cards.

Changes:
- Add 'enabled' flag to cardemu instance that is set/cleared by usb_command_sim_select() (the only place where sim switch occurs).
- Flag is initialized as false (disabled) by default, to match local SIM mode default.
- When card emulation is disabled, force SIM VCC to be "OFF",  SIM RESET as "not in RESET", and drop bytes bytes received on the ISO7816 interface (but do service buffers).

Change-Id: I4010f988712eac4a6af8568ccd60062f9de62449
 2022-03-11 18:36:06 +00:00
Alexander Couzens
2ceba0fdc4 firmware: usb: call USBD_HAL_DISCONNECT while usb init to recover from resets 
The firmware doesn't recover from a OSMO_ASSERT() which direct reset the board.
After the reset the firmware will waits forever for the USBD state USBD_STATE_CONFIGURED.
By adding the explicit USBD_HAL_DISCONNECT the board always recovers.

Fixes: OS#5478
Related: SYS#5752
Change-Id: I600a26025166d20b6b27c191f24e4023efdaadf6
 2022-03-09 07:21:01 +00:00
Harald Welte
755387ee31 Reduce bInterval of interrupt endpoints to avoid interrupt misses 
Particularly the VCC/RST/CLK changes can happen quite frequent, and
we were seeing quite a number of overflows of the usb_buf queue for EP06
(interrupt endpoint) in cardem.

I first tried increasing the maximum queue size to up to 10, but that
still didn't resolve those EP06 overflow error log messages.

Reducing the bInterval from 16 to 1 made them go away in all my
tests.

Change-Id: I5c272c31983de7201cfbd445c4484f6832d878ab
 2022-03-03 19:06:09 +01:00
Harald Welte
c3f366b55e contrib/simtrace.lua: Add Flag bits + Data to COL_INFO 
this provides an esy way to understand more without looking at the
detailed decode for each packet.

Change-Id: I0aa3d68172022907fbe8371aaca6538df0649dfe
 2022-03-03 18:04:45 +00:00
Harald Welte
b01dc91c0b simtrace2-cardem-pcsc: continue in case of LIBUSB_TRANSFER_ERROR 
Sometimes I get LIBUSB_TRANSFER_ERROR particularly when the USB bus
is very busy.  We shouldn't terminate the program, but simply resubmit
it.  That's what we have multiple transfers for...

Change-Id: I77d7bc636c21171fcff7e70e87c0109cbaee9b51
 2022-03-03 17:48:14 +01:00
Harald Welte
5cc3add0b0 simtrace2-cardem-pcsc: Fix copy+paste error in log message 
Change-Id: I98e4356900a22f69d0ff262cb112194b1e11d4af
 2022-03-03 17:48:14 +01:00
Harald Welte
ca62121c19 host: Don't pass -1 (converted to 255) as address 
We initialize a local variable to -1, and if the user specifies
no address from the command line, we use this in the interface match
struct, which uses a uint8_t.  This means 255 ends up in there, and
as a result no usb interface ever matches unless the user explicitly
specifies the -A command line argument.

With this patch any absent -A argument will result in ifm.addr == 0,
which means "don't match on address", and which is what we want here.

Change-Id: Iffb5fa406ddef00c7c15570ffca2c109b98d7a2d
 2022-03-03 17:48:14 +01:00
Harald Welte
8b52b44f1b simtrace2-cardem-pcsc: Detect card power-up without RESET 
In some readers (at least CardMan 3121), the simtrace2-cardem firmware
claims there are power-up sequences where RESET is released before VCC
becomes active.  Let's detect such spec-incompliant power-up sequences
and use them to trigger a cold reset of the card.

Change-Id: I682ac3d0c2b98749a6ed44f9a73e4b39354a4284
Closes: OS#5421
 2022-03-03 15:27:35 +01:00
Harald Welte
71ac54d7bf simtrace2-cardem-pcsc: Move all logging into libosmocore 
* drop log statements that are already in libosmo-simtrace2
* don't printf directly, but go via LOGCI
* make LOGCI use libosmocore logging
* configure libosmocore logging in a 'convenient' way

Change-Id: I6fa0da966e6d8e723c187404c17e90cfb3f3dd9f
 2022-03-03 15:27:34 +01:00
Harald Welte
ab5b2ffe1d simtrace2-cardem-pcsc: rename 'flags' to 'status_flags' 
there are other flags in the simtrace/cardem protocol...

Change-Id: I6362936c642e7abf4c501b4526a1654a25afedfe
 2022-03-03 15:27:15 +01:00
Harald Welte
ee9ddb8da1 host: Always initialize libosmocore logging before using it 
This avoids related ASSERTs or error messages in case any of the
libosmocore / libosmousb API functions internally tries to log
something.

Change-Id: I611c435516856c5c8928d7810fd9a9b831adc199
 2022-03-03 15:27:13 +01:00
Harald Welte
039680a8d4 cardem: set more reasonable interrupt priorities 
the ISO7816 UARTs have highest priority, while console has lowest.

remaining sources (USB, ADC, GPIO) are in between.

Change-Id: Ie6c97d61d8da3990b6e44144f36cb6d37d194307
 2022-02-21 23:24:20 +01:00
Harald Welte
8680677256 card_emu_uart_interrupt: ASSERT if we get called with wrong uart_chan 
This is what we do in all other functions, not sure why this one
wants to silently ignore any such programming errors.

Change-Id: I022eee86a5a3b5077abe59897161578ed960f1b1
 2022-02-14 10:18:45 +00:00
Harald Welte
20bc014b82 cardem: Report the VCC voltage (if supported) 
The SIMtrace2 protocol alwasy contained a field for the VCC voltage,
the cardem firmware just never populated that field, even on those
boards that use the ADC to determine its voltage.

Change-Id: Idcecad553fb36380e916378e1420488acbbfa8e3
 2022-02-14 10:18:39 +00:00
Eric Wild
3a6f1adc2e lua dissector: adjust usage instructions 
...as originally described in the first commit that added the file.

Change-Id: I67918f0f62b1619786324ae84276a46d7c64eee5
 2022-02-02 11:48:05 +01:00
Harald Welte
70e60aa1de contrib/simtrace.lua: Register for "decode as..." 
This allows to manually decode traces that don't contain the vid/pid information

Change-Id: Idd605f63f01f005f07a4c329847d08331bfdc9e8
 2022-01-26 16:10:27 +01:00
Harald Welte
4775a94959 contrib/simtrace.lua: Dissect some more cardem related message types 
Change-Id: I1892c1e154130d8048e99fd1d8f8809f00366e80
 2022-01-26 16:10:27 +01:00
Harald Welte
d3b9d95b34 contrib/simtrace.lua: Don't print SIMTRACE_MSGT_ in every COL_INFO 
this is redundant.  We care about *which* message type, and not about
wasting horizontal screen real-estate.

Change-Id: I98f90561b39401f1c2339f79a3cb40574bb03b2d
 2022-01-26 16:10:27 +01:00
Harald Welte
408889d8b2 contrib/simtrace.lua: print length + slot-number in decimal only 
Change-Id: Ia9a969b88170c49f8bb1cb0cda6918d6a894d3ba
 2022-01-26 15:06:06 +00:00
Harald Welte
7b160b5ed7 contrib/simtrace.lua: Add header with author/description/usage 
Change-Id: I56574741cd77436f9f452420677c00d8049a50cc
 2022-01-26 15:06:02 +00:00
Harald Welte
15a3ef25a2 cosmetic: contrib/simtrace.lua: more consistent formatting 
Change-Id: If842dd95c7244ebe33579ed104247c66682ed4d4
 2022-01-26 15:05:17 +00:00
Harald Welte
5820eacf57 contrib/simtrace.lua: Add VID/PID of all currentl simtrace2 devices 
Change-Id: Ie425f8dbd3a02c6bdcdaeaafaf0d5b4fb351ec4d
 2022-01-26 15:04:52 +00:00
Harald Welte
94cc319b8e host: properly zero-initialize interface match structures 
This can lead to some fields not properly zero-initialized, fooling
our matching code into the application having requested certain
fields to match ('0' is usually assumed to be unspecified).

Change-Id: I304d55b584e37d9dccb75b24057bb682f799beb2
 2022-01-25 16:40:27 +01:00
Harald Welte
7a450041bf cosmetic: Fix indent of printf() statement 
Change-Id: I9f5c9f7720b3bc3c8d5df9750b031d8bcf2dd435
 2022-01-25 16:39:46 +01:00
Harald Welte
3f0d92f282 host: Print strerror(errno) in case of problems opening the USB device 
Change-Id: If446bf08655739281f616df952714751fe9a3b18
 2022-01-25 16:09:55 +01:00
James Tavares
ea9a91f5ce gitignore: add missing entries binaries 
Add missing entries for simtrace2-tool, crctool, and host/tests

Change-Id: I23f4b387f220146bccf7d723cc773a72d8e17a65
 2022-01-11 17:09:38 +00:00
James Tavares
91a93bc5de firmware: add definition for main osc bypass when using external osc 
Add new board.h definition BOARD_MAINOSC_BYPASS to configure the clock module to use an external oscillator rather than a crystal. The qmod board is one such board.
Change-Id: If62f55cd4c8b0cf758534f09d25a9bcb028814a7
 2022-01-11 13:10:34 +00:00
James Tavares
aeaf12853e simtrace2-tool: add "modem sim-card (insert|remove)" command 
Add a new command to request that the simtrace2 firmware manipulate the
card detect signal, causing the downstream cellular modem to believe
that the SIM card has been inserted or removed, respectfully.

Change-Id: I8c79eb29379a789d9d0d21495e30d66ddbdfb022
 2022-01-10 18:06:45 -05:00
Eric Wild
7fde63b7c6 wireshark lua dissector: dissect more 
Change-Id: If81812b6330205a65c1c9b7d4240094b71f3c757
 2021-12-15 14:10:19 +00:00
Eric Wild
cb655f9774 firmware: add crc stub to all dfu apps to ensure reliable loading 
DFU flashing of apps sometimes aborts, and although rare this leads to
broken devices if no boot button or serial/jtag access exists, because
the bootloader will keep trying to start a half-flashed app that then
crashes at some point.

The easiest fix that works with existing bootloaders is to prepend a
small 512 byte stub that calculcates the crc and compares it with the
crc calculated at build time, and then either starts the actual app, or
sets the dfu flag and resets. This ensures we either have a working,
running app, or end up in the bootloader, ready to flash again.

For obvious reasons this only applies to dfu apps, and not to flash
targets like the actual bootloader itself.

Change-Id: Id6df0486c8b779889d21800dc2441b3aa9af8a5f
 2021-12-15 14:04:20 +00:00
Oliver Smith
f721e69bc1 treewide: remove FSF address 
Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.

Change-Id: Ie0a3b2273383adbb3303faffd6ff96be7f4cae99
 2021-12-14 11:47:21 +01:00
Oliver Smith
8dada9b454 host/contrib/simtrace2.spec.in: update 
Apply various improvements from Martin Hauke, thanks!

* Put sover into a variable
* Sync BuildRequires with configure.ac
* Update libosmo-simtrace2 summary
* Use %make_build instead of make %{?_smp_mflags}

Change-Id: I35ce3865702f72365b38b0eaa8b28f332dabcd1f
 2021-12-10 14:50:18 +01:00
Oliver Smith
afd23660b3 Bump version: 0.8.0.1-8281 → 0.8.1 
Change-Id: I6bcc798db9f4ab2b91711daebeba98abebd55e92
 2021-12-10 10:04:28 +01:00
Oliver Smith
24a9ee8ae6 host/contrib/simtrace2.spec.in: fix soname 
Adjust the soname in the rpm recipe too, to fix:
  error: File not found: /home/abuild/rpmbuild/BUILDROOT/simtrace2-0.8.0.202112100026-1.1.x86_64/usr/lib64/libosmo-simtrace2.so.0*

Change-Id: I748f44409ac736abbd5c18e31ae02d025dee2c77
 2021-12-10 10:04:13 +01:00
Harald Welte
45a8f2beee Bump version: 0.7.0.166-61b4-dirty → 0.8.0 
Change-Id: I1650f7181cf514ba00e6f70e8133ee88780ebf41
 2021-12-09 08:12:56 +01:00
Harald Welte
155c237504 host: Upgrade libosmocore dependency to 1.4.0 
1.4.0 contains the most recent changes to libosmousb, so let's use
that as a minimum basis.

Change-Id: Ia44377cd6a8d7998c6995a3f89adb22cdc675601
 2021-12-09 08:05:58 +01:00
Eric Wild
61b4aad46f firmware: remove dfu-dfu default target 
It's useless, since blupdate does the same thing, just much faster and
easier.

Change-Id: I86dddfacea2e35f4d5a7f23ee4b3d12e3f1d35f1
 2021-11-24 17:22:01 +00:00
Eric Wild
23125d05f7 jenkins: build bootloader updater 
Change-Id: I8b2023921a67b0e8945d8f24e4c8076de3e12acf
 2021-11-02 10:50:36 +00:00
Eric Wild
7ac85188f4 firmware: add missing usb strings to blupdate that prevented building it 
Change-Id: I8d0d9bf98748d475427d9b0c78f2e0532ee4bca1
 2021-11-02 09:54:55 +00:00
Eric Wild
23eb56319c add our default clang-format file 
Change-Id: I77aab70400bdbb46cbdd83e428e2a28ebf29b8dd
 2021-11-01 14:35:14 +01:00
Eric Wild
c85f52d5d5 firmware: drop cref printing 
No one reads this, no one wants to know this.

Change-Id: Ie2281e207164f82d8ee29bd596a5593c22aaf198
 2021-11-01 14:35:14 +01:00
Eric Wild
a079e2b4ee firmware: increase reset delay before usb reattach 
The previous value was way too low and led to reenumeration issues when
switching from app to bl because the hosts are fairly lenient and
feature long delays until they accept disappearing devices as gone for
good instead of ignoring a presuambly flaky usb cable or connection.

Related: SYS5061
Change-Id: I9b8c8bf794ad5b94fc7ea2a01d1ebf4e36862c36
 2021-11-01 14:35:14 +01:00
Eric Wild
f83d42ce51 firmware: remove usb pullup that dates back to simtrace1 
All the parts are DNP and never existed on the simtrace2 with sam3; the
sam3 has internal pullups that are part of the usb peripheral.

Change-Id: I04a703a2eba6ff1dc64692c089213389d0c1066d
 2021-11-01 14:35:14 +01:00
Eric Wild
a7e306f745 firmware: add bootloader update "app" 
This bl updater can be flashed as app and will update the bootloader and
then
delete itself before resetting the sam3, so the device will end up in
the newly
updated dfu bootloader afterwards, without having to press the
bootloader button
or requring any other manual interaction, ready to receive a new
application image.

Building the blupdater requires a previously built dfu-flash bootloader
bin file that
will then be embedded into the app during building.

Related: OS#1704
Related: SYS5061
Change-Id: I53dea57bba790a2ab3245d9483e0ff1c8d19d5e3
 2021-11-01 12:03:38 +00:00
Harald Welte
020edca678 cardem-pcsc: Fix return of uninitialized variable 
Fixes: CID#240740
Change-Id: I97431f491f60e2a6537502ef88042907723b7de6
 2021-10-25 08:12:08 +02:00
Eric Wild
17bfa5273f fix bootloader led config crash 
This led to occasional crashes for targets with leds since it was
introduced 3 years ago
The interesting thing is that most of the time it didn't crash...

Change-Id: Ia6a1b1fc0e44a301b4fb1d9c9fdbc27d61dcab97
 2021-10-20 20:03:06 +02:00
Eric Wild
a65fb1e319 clang build support 
Supposed to be used with https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm
+ distro provided binutils-arm-none-eabi package, might provide better and more reliable
binary sizes, especially for the bootloader.

Just run USE_CLANG=1 make

Change-Id: I1a19f40d44797efad5c46121e73115ed738a095b
 2021-10-20 20:03:06 +02:00
Eric Wild
af6ae8b8dd drop unused exidx sections when linking 
clang might emit those even though they are neither needed or wanted,
so just get rid of them.

Change-Id: I159b4405cebe72af4d98b27f876c48835ffd6e2d
 2021-10-20 20:03:06 +02:00
Eric Wild
90784220a5 add the ngff cardem to default build targets 
Change-Id: Icec4966fe419eee9f7ace67e46e3d88738812b38
 2021-10-20 20:03:06 +02:00
Harald Welte
651050922a simtrace2-tool: Initialize logging to avoid error on first log output 
This avoids
 ERROR: osmo_log_info == NULL! You must call log_init() before using logging in log_check_level()

Change-Id: Id355ef33e10164f8e8eb40c2fd0b606bc8e9b6f7
 2021-10-06 21:10:44 +02:00
Harald Welte
5b7a608277 simtrace2-cardem-pcsc: Remove double libusb initialization 
This code already calls osmo_libusb_init further above in the top
of the main() function, so there's no use of calling libusb_init()
directly in the same function lines below.

Change-Id: I2e0c7446aaa644c5aae1059ce91ff9f729903cbc
 2021-10-06 21:06:21 +02:00
Harald Welte
e304015b3c Use osmo_libusb_{init,exit}() instead of libusb_{init,exit}() 
We use other osmo_libusb_* functions later in the code, so it is best
to initialize the library via libosmousb, and not directly.

Change-Id: I2fd981935e1420e529f5dd8a98edd347c317284c
 2021-10-06 21:06:06 +02:00
Harald Welte
19ccc209c1 jenkins.sh: Build 'trace' firmware for ngff_cardem 
Let's create and publish binary builds for 'trace' on BOARD=ngff_carde.

According to SYS#5525 this is verified working since two months ago, so
there's no reason to withhold the binary builds for it.

Change-Id: I8a98002ef5aa58e5a3d49627323fe11505508bc8
Related: SYS#5525
 2021-10-06 21:01:14 +02:00
Eric Wild
5e82a2a1c6 Revert "firmware: data sections" 
This reverts commit e6a76c7bf4.

Might or might not cause weird issues depending on gcc and binutils
versions, let's see if this helps.

Change-Id: I2f593fd5e0f1494aae6b9fcfb2160a6c9168f5b8
 2021-10-04 18:05:45 +02:00
Eric Wild
301aec51f7 contrib/jenkins.sh: lower trace to make bl fit 
We keep running out of rom space, so reduce tracing to nothing for alle
dfu targets, and let's hope newer gcc versions stop producing more
code...

Change-Id: I7d2947c84097035bed00ad489a175d614b4c388e
 2021-10-04 15:07:44 +00:00
Eric Wild
1f75e3881c contrib: allow manually forcing bulk simtrace dissection 
Change-Id: I5fcfe3c221b87b02e21c857ac51d0392c3b4de3c
 2021-08-09 15:18:59 +02:00
Eric Wild
5beffa5d91 contrib/jenkins.sh: build ngff_Cardem dfu bootloader 
It does fit with some compiler versions, while others overflow the bl region,
so just reduce the trace level a bit to make it fits all the time.

Change-Id: I168a847da8dfc585aaeef0030f95fc225a713147
 2021-08-09 12:45:13 +02:00
Harald Welte
3092721729 contrib/jenkins.sh: Build APP=cardem for BOARD=ngff_cardem 
This makes sure downloads.osmocom.org will get cardem images
for the new ngff_cardem board.

The dfu loader was not enabled as it currently overflows the ROM
region by 200 bytes, see OS#5210.

Change-Id: Id2b7925c823fb19f880e06a205764d2b19de4ad4
Related: OS#5210
 2021-08-08 21:31:03 +02:00
Eric Wild
7ca68359f3 cardem: fix spurious NULL bytes during transfers 
The "wait time extension timer" was apparently not being reset during
normal tx operations, which led to occasional NULL (0x60) bytes getting
injected into transfers, which in turn led to more tx bytes than what
the reader side expects...

The odd thing is that this was only noticeable with high baud rates,
probably due to the very long default WT of 9600 ETU, and even then only
because it led to weird ngff modem resets after benign transfers.

Change-Id: I15b0b83b7d93b8e5589f3640bd6eb2fc82f93394
Related: SYS#5553
 2021-08-08 04:14:38 +02:00
Harald Welte
a951c4ae02 simtrace2.spec: Add simtrace2-tool binary to package 
This fixes RPM build issues reported as

[   59s] error: Installed (but unpackaged) file(s) found:
[   59s]    /usr/bin/simtrace2-tool

Change-Id: I1fd5980a686652afb47cd1c30e12919de626aec7
 2021-08-03 09:02:34 +02:00
Eric Wild
d1d504bfa5 firmware: trace for ngff 
Change-Id: Iee1eedd93d72c02880fd59fb8588abe14d05e77b
 2021-08-02 15:10:21 +00:00
Eric Wild
23a9771467 contrib: more cardem dissection 
Change-Id: Ia74d3674f854b390c9745a1cb8d5756bd5d39540
 2021-08-02 09:23:19 +00:00
Eric Wild
a755b53768 simtrace2-cardem: use local sim on exit 
There is no obvious reason why the st should be stuck in cardem mode
without a working running util on the host side since there is no state
that is being kept, so switch back to using the local sim upon reset.

Change-Id: Ib622af0027d40b4e8afbb0fa0d3689f0dbfcac92
 2021-08-02 09:23:19 +00:00
Eric Wild
1ad205e682 firmware: make the ngff beakout blink 
..but only if the cardem sim is active

Change-Id: I65f1fbeb06690a143ef4c792728c9cb917a4ffde
 2021-08-02 09:22:46 +00:00
Eric Wild
34317c1f32 firmware: proper makefile deps 
Single threaded evaluation is (assumed to be!) left to right, depth
first - but with concurrent make using -j this breaks, because the
actual usb string header is generated after the attempt to concurrently
compile the code that needs it, since there is no explicit order among
the all: dependencies.

This is fixed by properly adding a dependency on that header.

Change-Id: I0bdf915deabeda861f6398e654764918e58a64c2
 2021-08-02 09:22:46 +00:00
Eric Wild
e6a76c7bf4 firmware: data sections 
Might or might not be compiler default, but why guess?

Change-Id: Id3da816611afea0858466949dcc47db5e5d5493a
 2021-08-02 09:22:46 +00:00
Harald Welte
4fe93be725 introduce support for new ngff_cardem board 
This adds support for the new ngff_cardem board, a board that
basically combines a ngff breakout board with a built-in SIMtrace2.

Cardem works, but depending on the modem it might need a adjusted ATR to
ensure a lower baud  rate is used by the modem, high rates might lead
to weird power cycling of the card after a few transfers.

Trace was also tested and appears to work as expected.

Change-Id: Ia96124fbe8a752c98e7fd4096d542a3b2b9bc255
 2021-08-02 09:22:46 +00:00
Harald Welte
51d87fbb66 Introduce simtrace2-tool 
The simtrace-tool is a command line tool which can be used to e.g.
manually request a modem reset.

Change-Id: I3a8896ac2b3caef7590b51118359e5caed820a40
 2021-08-02 09:22:46 +00:00
Oliver Smith
c7490b46cd gitreview: new file 
Change-Id: I650fe7c930392d24042e65295fa49400478ffab9
 2021-07-30 10:32:35 +02:00
Harald Welte
c85f39078c contrib/flash.py: Add OCTSIMTEST support 
Change-Id: Id906d955f45a204ac0b00f56d8f5149c64c62f32
 2021-07-09 11:46:16 +00:00
Harald Welte
06fe3b8295 99-simtrace2.rules: Add OCTSIMTEST 
Change-Id: I226ee21e0937f851428578578f81075fa703dd54
 2021-07-09 11:46:11 +00:00
Harald Welte
d0c420055d board_gpio.gnumeric: Add ngff-cardem pin-out 
Change-Id: Ie1a7be85200e331232ad52aa0468c748ff053142
 2021-07-01 23:28:52 +02:00
Harald Welte
3ef40d1ca6 simtrace2-list: Use osmo_st2_compatible_dev_ids[] 
we shouldn't use a local copy of the device id list, which is already
outdated now that OCTSIMTEST support has been added to libosmo-st2

Change-Id: I2231006b94c33fe3b28ce37b0d54c67206751058
 2021-06-30 08:17:58 +00:00
Harald Welte
dcfea28a4f don't printf() directly from library code, go via libosmocore logging 
This allows us to use different log levels, and permits the user to use
other log targets.

Change-Id: I08ef7cfa5d8734882746a11ccd5f059d757401ae
 2021-06-30 08:17:58 +00:00
Eric Wild
264f615b65 cardemu: support 1v8 for the tester 
The tester has shifters, while the original simtrace relies upon the
reader restarting the powerup attempt with > 1v8 after not respondig due
to a lack of shifters and therefore 1v8 support.

Change-Id: I520aa26c6e0fb34568a4f632943efa59a0da831c
 2021-06-26 02:54:20 +02:00
Eric Wild
017e10e9ef cardem: free the buf 
This leak was probably hard to notice since config commands are usually
rarely sent.

Change-Id: I21411ef78a32a5258a7008272774cdb83119b413
 2021-06-21 23:46:38 +02:00
Eric Wild
f0653533cc contrib: add a basic simtrace lua dissector for wireshark 
See Help->About Wireshark->Folders tab,the usual place this should go is
~/.local/lib/wireshark/plugins
Hot reload possible after editing using Analyze->Reload Lua Plugins

Change-Id: I360ab522dabc3a378969df36efd3b48fc4cade3c
 2021-06-21 17:38:53 +02:00
Harald Welte
f2e924c4aa firmware: octsimtest: ensure all card_insert GPIO are 0 after reset 
Change-Id: I3c3744673ba53750cb66aa5023c8228edb006bfc
 2021-06-06 11:46:49 +02:00
Harald Welte
efb47b3fae firmware: octsimtest: Add i/I command for setting card-insert via I2C GPIO 
Change-Id: Ie1483ccf8465df0d640d55e50421fda910dced4a
 2021-06-06 11:46:49 +02:00
Harald Welte
2b1d1e6d92 firmware: octsimtest: Fix disabling the card_insert signal 
Back in I8c9b0c3d862a967832134b24252577739182da62 we added support
for enabling the card_insert signal, but not for explicit disable
of it.  Let's fix that.

Change-Id: I6f32bde60674119c9912e51059a53b5ee74d074a
 2021-06-03 15:06:58 +02:00
Harald Welte
e2971dee2a firmware: octsimtest: use TRACE_* macros instead of direct printf 
Change-Id: I41864bc2f64905a4f2ccb50769b1840e8a490c76
 2021-06-03 14:37:45 +02:00
Harald Welte
731e199fc4 firmware: octsimtest: Support SIMTRACE_MSGT_DT_CEMU_CARDINSERT 
The octsimtest board can control the card-insert contact of the OCTSIM
under test via an external I2C gpio multiplexer; let's add support for
that.

Change-Id: I8c9b0c3d862a967832134b24252577739182da62
 2021-06-03 14:37:45 +02:00
Harald Welte
f69a60f255 firmware: cardem: re-factor CARDINSERT command processing 
move it out of the general command dispatch switch statement
and into a separate function.

Change-Id: Ia40c3d9999be68248da0dcc69d298450ca6e4869
 2021-06-03 14:37:45 +02:00
Harald Welte
dd5794c975 firmware: octsimtest: mcp23017 initializaiton 
* driver should not have hard-coded understanding about I/O directions
* board code should pass the I/O direction to driver
* board code should use the correct I/O directions (A0..7, B0: output)

Change-Id: Id4a8e012a33cee01bb489e612e17920760b9be59
 2021-06-03 14:37:45 +02:00
Harald Welte
d46f6bae2c firmware: octsimtest: Make slot mux configurable via USB 
Change-Id: I4cdb250d2e1dbc5b8b0169f8b7c21e288b492e1d
 2021-06-03 14:37:43 +02:00
Harald Welte
3561fc4c8b firmware: octsimtest: Fix IO_DIR pin definition 
Change-Id: I776c9106bcd4ceb24a5d50ea05c6025dedb73822
 2021-06-03 14:32:36 +02:00
Harald Welte
b69f5a85b3 contrib/jenkins.sh: Build 'cardem' app for 'octsimtest' board 
Change-Id: Ia38bbb85c2828ab7307ffe688e50d7cdf70d6d39
 2021-06-03 09:36:10 +02:00
Harald Welte
4996d7d634 octsimtest: Adjust VCC voltage thresholds (resistive VCC divider) 
octsimtest has a resistive voltage divider in front of the VCC ADC
in order to also detect 5V.  We must make the thresholds board-specific
and adjust them for octsimtest.

Change-Id: I9e4adb4f349d2d838ea4100eb49271f3a0e7a2a5
 2021-06-03 09:36:10 +02:00
Harald Welte
054d7ca499 cardem-pcsc: initialize libosmocore logging 
Change-Id: I815d39190e944d9512ffc8e5f581515d7be9834f
 2021-06-02 22:57:10 +02:00
Harald Welte
5b825beb41 octsimtest: Switch direction of I/O level shifter depending on uart tx / rx 
Contrary to other hardware designs, octsimtest has a level-shifter in
the I/O line to support testing with 1.8, 3 and 5V.  This level shifter
is bi-directional, but the direction needs to be explicitly specified
via the SIM_IO_DIR signal attached to PA26.

Change-Id: I44171363b5bd69d6049b12c86f8143be83557cb2
 2021-06-02 22:57:10 +02:00
Harald Welte
31d103b9f6 octsimtest: most code for support of this new board 
* code for controlling the Card slot + frequencyt divider muxes
* put everything in place to build cardem application for it

Change-Id: I7e03e0c0f2999a1ce2dad966d98e22033fa58465
 2021-06-02 22:56:12 +02:00
Harald Welte
73466e2b89 octsimtest: remove lots of unused #defines 
The octsimtest board only supports cardem mode, not 'ccid'
nor 'sniffer'.  Remove related GPIO pin #defines from board.h

Change-Id: I43e8631d945ba183a1e5b1e37dd4565adb377154
 2021-06-02 22:56:04 +02:00
Harald Welte
913c86b95d Add usb product ID of sysmoOCTSIMTEST 
This is a custom board for production testing of the sysmoOCTSIM,
an 8-slot smart card reader.

Change-Id: I65839be50ac896c76f34755fb2800f836f6cdae4
 2021-06-02 10:09:40 +02:00
Harald Welte
0516464620 assert: Use printf_sync() to ensure printing of assert / panic 
Change-Id: Icc202e60445d9be1cdcd61176db5ed1704d583e7
 2021-06-02 09:12:35 +02:00
Harald Welte
c1033c8611 simtrace2-cardem-pcsc: Reset the real card if reader resets cardem 
When the cardem detects a reset from the phone/modem, pass this on
to the actual card via the PC/SC reader.  This is important to
reset the card state whenever requested by the stack/driver on the
phone/modem.

Change-Id: I7056476c5f81e8aa8f550afb86bf2380d1497ebb
Depends: libosmocore 20199da02d37a6d284915a27ec12641e79b8781c
 2021-06-01 21:09:05 +02:00
Harald Welte
644c2131ca simtrace2-cardem-pcsc: Decode STATUS flags to strings 
SIMtrace IRQ STATUS: flags=0x13, fi=9, di=6, wi=10 wtime=9600 (RESET VCC  CLK )

is more understandable than

SIMtrace IRQ STATUS: flags=0x13, fi=9, di=6, wi=10 wtime=9600

Change-Id: I5bbfa1d99ebee4b297d894a5f444dbe743c7ab70
 2021-06-01 21:09:05 +02:00
Harald Welte
796501293d Revert "cardem: disable upload for simtrace2" 
This reverts commit baa62777c8 which
deleted simtrace-cardem builds to prevent them from being published.

Change-Id: I63fd4bea2985fcc87f202d8b69a4f24661858185
 2021-06-01 18:47:37 +02:00
139 changed files with 3759 additions and 943 deletions
Expand all files Collapse all files

1
.checkpatch.conf Normal file
View File

@@ -0,0 +1 @@
--exclude ^firmware/atmel_softpack_libraries/.*$

563
.clang-format Normal file
View File

@@ -0,0 +1,563 @@
# SPDX-License-Identifier: GPL-2.0
#
# clang-format configuration file. Intended for clang-format >= 4.
#
# For more information, see:
#
# Documentation/process/clang-format.rst
# https://clang.llvm.org/docs/ClangFormat.html
# https://clang.llvm.org/docs/ClangFormatStyleOptions.html
#
---
AccessModifierOffset: -4
AlignAfterOpenBracket: Align
AlignConsecutiveAssignments: false
AlignConsecutiveDeclarations: false
#AlignEscapedNewlines: Left # Unknown to clang-format-4.0
AlignOperands: true
AlignTrailingComments: false
AllowAllParametersOfDeclarationOnNextLine: false
AllowShortBlocksOnASingleLine: false
AllowShortCaseLabelsOnASingleLine: false
AllowShortFunctionsOnASingleLine: None
AllowShortIfStatementsOnASingleLine: false
AllowShortLoopsOnASingleLine: false
AlwaysBreakAfterDefinitionReturnType: None
AlwaysBreakAfterReturnType: None
AlwaysBreakBeforeMultilineStrings: false
AlwaysBreakTemplateDeclarations: false
BinPackArguments: true
BinPackParameters: true
BraceWrapping:
AfterClass: false
AfterControlStatement: false
AfterEnum: false
AfterFunction: true
AfterNamespace: true
AfterObjCDeclaration: false
AfterStruct: false
AfterUnion: false
#AfterExternBlock: false # Unknown to clang-format-5.0
BeforeCatch: false
BeforeElse: false
IndentBraces: false
#SplitEmptyFunction: true # Unknown to clang-format-4.0
#SplitEmptyRecord: true # Unknown to clang-format-4.0
#SplitEmptyNamespace: true # Unknown to clang-format-4.0
BreakBeforeBinaryOperators: None
BreakBeforeBraces: Custom
#BreakBeforeInheritanceComma: false # Unknown to clang-format-4.0
BreakBeforeTernaryOperators: false
BreakConstructorInitializersBeforeComma: false
#BreakConstructorInitializers: BeforeComma # Unknown to clang-format-4.0
BreakAfterJavaFieldAnnotations: false
BreakStringLiterals: false
ColumnLimit: 120
CommentPragmas: '^ IWYU pragma:'
#CompactNamespaces: false # Unknown to clang-format-4.0
ConstructorInitializerAllOnOneLineOrOnePerLine: false
ConstructorInitializerIndentWidth: 8
ContinuationIndentWidth: 8
Cpp11BracedListStyle: false
DerivePointerAlignment: false
DisableFormat: false
ExperimentalAutoDetectBinPacking: false
#FixNamespaceComments: false # Unknown to clang-format-4.0
# Taken from:
# git grep -h '^#define [^[:space:]]*for_each[^[:space:]]*(' include/ \
# | sed "s,^#define \([^[:space:]]*for_each[^[:space:]]*\)(.*$, - '\1'," \
# | sort | uniq
ForEachMacros:
- 'apei_estatus_for_each_section'
- 'ata_for_each_dev'
- 'ata_for_each_link'
- '__ata_qc_for_each'
- 'ata_qc_for_each'
- 'ata_qc_for_each_raw'
- 'ata_qc_for_each_with_internal'
- 'ax25_for_each'
- 'ax25_uid_for_each'
- '__bio_for_each_bvec'
- 'bio_for_each_bvec'
- 'bio_for_each_bvec_all'
- 'bio_for_each_integrity_vec'
- '__bio_for_each_segment'
- 'bio_for_each_segment'
- 'bio_for_each_segment_all'
- 'bio_list_for_each'
- 'bip_for_each_vec'
- 'bitmap_for_each_clear_region'
- 'bitmap_for_each_set_region'
- 'blkg_for_each_descendant_post'
- 'blkg_for_each_descendant_pre'
- 'blk_queue_for_each_rl'
- 'bond_for_each_slave'
- 'bond_for_each_slave_rcu'
- 'bpf_for_each_spilled_reg'
- 'btree_for_each_safe128'
- 'btree_for_each_safe32'
- 'btree_for_each_safe64'
- 'btree_for_each_safel'
- 'card_for_each_dev'
- 'cgroup_taskset_for_each'
- 'cgroup_taskset_for_each_leader'
- 'cpufreq_for_each_entry'
- 'cpufreq_for_each_entry_idx'
- 'cpufreq_for_each_valid_entry'
- 'cpufreq_for_each_valid_entry_idx'
- 'css_for_each_child'
- 'css_for_each_descendant_post'
- 'css_for_each_descendant_pre'
- 'device_for_each_child_node'
- 'displayid_iter_for_each'
- 'dma_fence_chain_for_each'
- 'do_for_each_ftrace_op'
- 'drm_atomic_crtc_for_each_plane'
- 'drm_atomic_crtc_state_for_each_plane'
- 'drm_atomic_crtc_state_for_each_plane_state'
- 'drm_atomic_for_each_plane_damage'
- 'drm_client_for_each_connector_iter'
- 'drm_client_for_each_modeset'
- 'drm_connector_for_each_possible_encoder'
- 'drm_for_each_bridge_in_chain'
- 'drm_for_each_connector_iter'
- 'drm_for_each_crtc'
- 'drm_for_each_crtc_reverse'
- 'drm_for_each_encoder'
- 'drm_for_each_encoder_mask'
- 'drm_for_each_fb'
- 'drm_for_each_legacy_plane'
- 'drm_for_each_plane'
- 'drm_for_each_plane_mask'
- 'drm_for_each_privobj'
- 'drm_mm_for_each_hole'
- 'drm_mm_for_each_node'
- 'drm_mm_for_each_node_in_range'
- 'drm_mm_for_each_node_safe'
- 'flow_action_for_each'
- 'for_each_acpi_dev_match'
- 'for_each_active_dev_scope'
- 'for_each_active_drhd_unit'
- 'for_each_active_iommu'
- 'for_each_aggr_pgid'
- 'for_each_available_child_of_node'
- 'for_each_bio'
- 'for_each_board_func_rsrc'
- 'for_each_bvec'
- 'for_each_card_auxs'
- 'for_each_card_auxs_safe'
- 'for_each_card_components'
- 'for_each_card_dapms'
- 'for_each_card_pre_auxs'
- 'for_each_card_prelinks'
- 'for_each_card_rtds'
- 'for_each_card_rtds_safe'
- 'for_each_card_widgets'
- 'for_each_card_widgets_safe'
- 'for_each_cgroup_storage_type'
- 'for_each_child_of_node'
- 'for_each_clear_bit'
- 'for_each_clear_bit_from'
- 'for_each_cmsghdr'
- 'for_each_compatible_node'
- 'for_each_component_dais'
- 'for_each_component_dais_safe'
- 'for_each_comp_order'
- 'for_each_console'
- 'for_each_cpu'
- 'for_each_cpu_and'
- 'for_each_cpu_not'
- 'for_each_cpu_wrap'
- 'for_each_dapm_widgets'
- 'for_each_dev_addr'
- 'for_each_dev_scope'
- 'for_each_dma_cap_mask'
- 'for_each_dpcm_be'
- 'for_each_dpcm_be_rollback'
- 'for_each_dpcm_be_safe'
- 'for_each_dpcm_fe'
- 'for_each_drhd_unit'
- 'for_each_dss_dev'
- 'for_each_dtpm_table'
- 'for_each_efi_memory_desc'
- 'for_each_efi_memory_desc_in_map'
- 'for_each_element'
- 'for_each_element_extid'
- 'for_each_element_id'
- 'for_each_endpoint_of_node'
- 'for_each_evictable_lru'
- 'for_each_fib6_node_rt_rcu'
- 'for_each_fib6_walker_rt'
- 'for_each_free_mem_pfn_range_in_zone'
- 'for_each_free_mem_pfn_range_in_zone_from'
- 'for_each_free_mem_range'
- 'for_each_free_mem_range_reverse'
- 'for_each_func_rsrc'
- 'for_each_hstate'
- 'for_each_if'
- 'for_each_iommu'
- 'for_each_ip_tunnel_rcu'
- 'for_each_irq_nr'
- 'for_each_link_codecs'
- 'for_each_link_cpus'
- 'for_each_link_platforms'
- 'for_each_lru'
- 'for_each_matching_node'
- 'for_each_matching_node_and_match'
- 'for_each_member'
- 'for_each_memcg_cache_index'
- 'for_each_mem_pfn_range'
- '__for_each_mem_range'
- 'for_each_mem_range'
- '__for_each_mem_range_rev'
- 'for_each_mem_range_rev'
- 'for_each_mem_region'
- 'for_each_migratetype_order'
- 'for_each_msi_entry'
- 'for_each_msi_entry_safe'
- 'for_each_msi_vector'
- 'for_each_net'
- 'for_each_net_continue_reverse'
- 'for_each_netdev'
- 'for_each_netdev_continue'
- 'for_each_netdev_continue_rcu'
- 'for_each_netdev_continue_reverse'
- 'for_each_netdev_feature'
- 'for_each_netdev_in_bond_rcu'
- 'for_each_netdev_rcu'
- 'for_each_netdev_reverse'
- 'for_each_netdev_safe'
- 'for_each_net_rcu'
- 'for_each_new_connector_in_state'
- 'for_each_new_crtc_in_state'
- 'for_each_new_mst_mgr_in_state'
- 'for_each_new_plane_in_state'
- 'for_each_new_private_obj_in_state'
- 'for_each_node'
- 'for_each_node_by_name'
- 'for_each_node_by_type'
- 'for_each_node_mask'
- 'for_each_node_state'
- 'for_each_node_with_cpus'
- 'for_each_node_with_property'
- 'for_each_nonreserved_multicast_dest_pgid'
- 'for_each_of_allnodes'
- 'for_each_of_allnodes_from'
- 'for_each_of_cpu_node'
- 'for_each_of_pci_range'
- 'for_each_old_connector_in_state'
- 'for_each_old_crtc_in_state'
- 'for_each_old_mst_mgr_in_state'
- 'for_each_oldnew_connector_in_state'
- 'for_each_oldnew_crtc_in_state'
- 'for_each_oldnew_mst_mgr_in_state'
- 'for_each_oldnew_plane_in_state'
- 'for_each_oldnew_plane_in_state_reverse'
- 'for_each_oldnew_private_obj_in_state'
- 'for_each_old_plane_in_state'
- 'for_each_old_private_obj_in_state'
- 'for_each_online_cpu'
- 'for_each_online_node'
- 'for_each_online_pgdat'
- 'for_each_pci_bridge'
- 'for_each_pci_dev'
- 'for_each_pci_msi_entry'
- 'for_each_pcm_streams'
- 'for_each_physmem_range'
- 'for_each_populated_zone'
- 'for_each_possible_cpu'
- 'for_each_present_cpu'
- 'for_each_prime_number'
- 'for_each_prime_number_from'
- 'for_each_process'
- 'for_each_process_thread'
- 'for_each_prop_codec_conf'
- 'for_each_prop_dai_codec'
- 'for_each_prop_dai_cpu'
- 'for_each_prop_dlc_codecs'
- 'for_each_prop_dlc_cpus'
- 'for_each_prop_dlc_platforms'
- 'for_each_property_of_node'
- 'for_each_registered_fb'
- 'for_each_requested_gpio'
- 'for_each_requested_gpio_in_range'
- 'for_each_reserved_mem_range'
- 'for_each_reserved_mem_region'
- 'for_each_rtd_codec_dais'
- 'for_each_rtd_components'
- 'for_each_rtd_cpu_dais'
- 'for_each_rtd_dais'
- 'for_each_set_bit'
- 'for_each_set_bit_from'
- 'for_each_set_clump8'
- 'for_each_sg'
- 'for_each_sg_dma_page'
- 'for_each_sg_page'
- 'for_each_sgtable_dma_page'
- 'for_each_sgtable_dma_sg'
- 'for_each_sgtable_page'
- 'for_each_sgtable_sg'
- 'for_each_sibling_event'
- 'for_each_subelement'
- 'for_each_subelement_extid'
- 'for_each_subelement_id'
- '__for_each_thread'
- 'for_each_thread'
- 'for_each_unicast_dest_pgid'
- 'for_each_vsi'
- 'for_each_wakeup_source'
- 'for_each_zone'
- 'for_each_zone_zonelist'
- 'for_each_zone_zonelist_nodemask'
- 'fwnode_for_each_available_child_node'
- 'fwnode_for_each_child_node'
- 'fwnode_graph_for_each_endpoint'
- 'gadget_for_each_ep'
- 'genradix_for_each'
- 'genradix_for_each_from'
- 'hash_for_each'
- 'hash_for_each_possible'
- 'hash_for_each_possible_rcu'
- 'hash_for_each_possible_rcu_notrace'
- 'hash_for_each_possible_safe'
- 'hash_for_each_rcu'
- 'hash_for_each_safe'
- 'hctx_for_each_ctx'
- 'hlist_bl_for_each_entry'
- 'hlist_bl_for_each_entry_rcu'
- 'hlist_bl_for_each_entry_safe'
- 'hlist_for_each'
- 'hlist_for_each_entry'
- 'hlist_for_each_entry_continue'
- 'hlist_for_each_entry_continue_rcu'
- 'hlist_for_each_entry_continue_rcu_bh'
- 'hlist_for_each_entry_from'
- 'hlist_for_each_entry_from_rcu'
- 'hlist_for_each_entry_rcu'
- 'hlist_for_each_entry_rcu_bh'
- 'hlist_for_each_entry_rcu_notrace'
- 'hlist_for_each_entry_safe'
- 'hlist_for_each_entry_srcu'
- '__hlist_for_each_rcu'
- 'hlist_for_each_safe'
- 'hlist_nulls_for_each_entry'
- 'hlist_nulls_for_each_entry_from'
- 'hlist_nulls_for_each_entry_rcu'
- 'hlist_nulls_for_each_entry_safe'
- 'i3c_bus_for_each_i2cdev'
- 'i3c_bus_for_each_i3cdev'
- 'ide_host_for_each_port'
- 'ide_port_for_each_dev'
- 'ide_port_for_each_present_dev'
- 'idr_for_each_entry'
- 'idr_for_each_entry_continue'
- 'idr_for_each_entry_continue_ul'
- 'idr_for_each_entry_ul'
- 'in_dev_for_each_ifa_rcu'
- 'in_dev_for_each_ifa_rtnl'
- 'inet_bind_bucket_for_each'
- 'inet_lhash2_for_each_icsk_rcu'
- 'key_for_each'
- 'key_for_each_safe'
- 'klp_for_each_func'
- 'klp_for_each_func_safe'
- 'klp_for_each_func_static'
- 'klp_for_each_object'
- 'klp_for_each_object_safe'
- 'klp_for_each_object_static'
- 'kunit_suite_for_each_test_case'
- 'kvm_for_each_memslot'
- 'kvm_for_each_vcpu'
- 'list_for_each'
- 'list_for_each_codec'
- 'list_for_each_codec_safe'
- 'list_for_each_continue'
- 'list_for_each_entry'
- 'list_for_each_entry_continue'
- 'list_for_each_entry_continue_rcu'
- 'list_for_each_entry_continue_reverse'
- 'list_for_each_entry_from'
- 'list_for_each_entry_from_rcu'
- 'list_for_each_entry_from_reverse'
- 'list_for_each_entry_lockless'
- 'list_for_each_entry_rcu'
- 'list_for_each_entry_reverse'
- 'list_for_each_entry_safe'
- 'list_for_each_entry_safe_continue'
- 'list_for_each_entry_safe_from'
- 'list_for_each_entry_safe_reverse'
- 'list_for_each_entry_srcu'
- 'list_for_each_prev'
- 'list_for_each_prev_safe'
- 'list_for_each_safe'
- 'llist_for_each'
- 'llist_for_each_entry'
- 'llist_for_each_entry_safe'
- 'llist_for_each_safe'
- 'mci_for_each_dimm'
- 'media_device_for_each_entity'
- 'media_device_for_each_intf'
- 'media_device_for_each_link'
- 'media_device_for_each_pad'
- 'nanddev_io_for_each_page'
- 'netdev_for_each_lower_dev'
- 'netdev_for_each_lower_private'
- 'netdev_for_each_lower_private_rcu'
- 'netdev_for_each_mc_addr'
- 'netdev_for_each_uc_addr'
- 'netdev_for_each_upper_dev_rcu'
- 'netdev_hw_addr_list_for_each'
- 'nft_rule_for_each_expr'
- 'nla_for_each_attr'
- 'nla_for_each_nested'
- 'nlmsg_for_each_attr'
- 'nlmsg_for_each_msg'
- 'nr_neigh_for_each'
- 'nr_neigh_for_each_safe'
- 'nr_node_for_each'
- 'nr_node_for_each_safe'
- 'of_for_each_phandle'
- 'of_property_for_each_string'
- 'of_property_for_each_u32'
- 'pci_bus_for_each_resource'
- 'pcl_for_each_chunk'
- 'pcl_for_each_segment'
- 'pcm_for_each_format'
- 'ping_portaddr_for_each_entry'
- 'plist_for_each'
- 'plist_for_each_continue'
- 'plist_for_each_entry'
- 'plist_for_each_entry_continue'
- 'plist_for_each_entry_safe'
- 'plist_for_each_safe'
- 'pnp_for_each_card'
- 'pnp_for_each_dev'
- 'protocol_for_each_card'
- 'protocol_for_each_dev'
- 'queue_for_each_hw_ctx'
- 'radix_tree_for_each_slot'
- 'radix_tree_for_each_tagged'
- 'rb_for_each'
- 'rbtree_postorder_for_each_entry_safe'
- 'rdma_for_each_block'
- 'rdma_for_each_port'
- 'rdma_umem_for_each_dma_block'
- 'resource_list_for_each_entry'
- 'resource_list_for_each_entry_safe'
- 'rhl_for_each_entry_rcu'
- 'rhl_for_each_rcu'
- 'rht_for_each'
- 'rht_for_each_entry'
- 'rht_for_each_entry_from'
- 'rht_for_each_entry_rcu'
- 'rht_for_each_entry_rcu_from'
- 'rht_for_each_entry_safe'
- 'rht_for_each_from'
- 'rht_for_each_rcu'
- 'rht_for_each_rcu_from'
- '__rq_for_each_bio'
- 'rq_for_each_bvec'
- 'rq_for_each_segment'
- 'scsi_for_each_prot_sg'
- 'scsi_for_each_sg'
- 'sctp_for_each_hentry'
- 'sctp_skb_for_each'
- 'shdma_for_each_chan'
- '__shost_for_each_device'
- 'shost_for_each_device'
- 'sk_for_each'
- 'sk_for_each_bound'
- 'sk_for_each_entry_offset_rcu'
- 'sk_for_each_from'
- 'sk_for_each_rcu'
- 'sk_for_each_safe'
- 'sk_nulls_for_each'
- 'sk_nulls_for_each_from'
- 'sk_nulls_for_each_rcu'
- 'snd_array_for_each'
- 'snd_pcm_group_for_each_entry'
- 'snd_soc_dapm_widget_for_each_path'
- 'snd_soc_dapm_widget_for_each_path_safe'
- 'snd_soc_dapm_widget_for_each_sink_path'
- 'snd_soc_dapm_widget_for_each_source_path'
- 'tb_property_for_each'
- 'tcf_exts_for_each_action'
- 'udp_portaddr_for_each_entry'
- 'udp_portaddr_for_each_entry_rcu'
- 'usb_hub_for_each_child'
- 'v4l2_device_for_each_subdev'
- 'v4l2_m2m_for_each_dst_buf'
- 'v4l2_m2m_for_each_dst_buf_safe'
- 'v4l2_m2m_for_each_src_buf'
- 'v4l2_m2m_for_each_src_buf_safe'
- 'virtio_device_for_each_vq'
- 'while_for_each_ftrace_op'
- 'xa_for_each'
- 'xa_for_each_marked'
- 'xa_for_each_range'
- 'xa_for_each_start'
- 'xas_for_each'
- 'xas_for_each_conflict'
- 'xas_for_each_marked'
- 'xbc_array_for_each_value'
- 'xbc_for_each_key_value'
- 'xbc_node_for_each_array_value'
- 'xbc_node_for_each_child'
- 'xbc_node_for_each_key_value'
- 'zorro_for_each_dev'
- 'for_each_line'
- 'for_each_non_empty_line'
#IncludeBlocks: Preserve # Unknown to clang-format-5.0
IncludeCategories:
- Regex: '.*'
Priority: 1
IncludeIsMainRegex: '(Test)?$'
IndentCaseLabels: false
#IndentPPDirectives: None # Unknown to clang-format-5.0
IndentWidth: 8
IndentWrappedFunctionNames: false
JavaScriptQuotes: Leave
JavaScriptWrapImports: true
KeepEmptyLinesAtTheStartOfBlocks: false
MacroBlockBegin: ''
MacroBlockEnd: ''
MaxEmptyLinesToKeep: 1
NamespaceIndentation: None
#ObjCBinPackProtocolList: Auto # Unknown to clang-format-5.0
ObjCBlockIndentWidth: 8
ObjCSpaceAfterProperty: true
ObjCSpaceBeforeProtocolList: true
# Taken from git's rules
#PenaltyBreakAssignment: 10 # Unknown to clang-format-4.0
PenaltyBreakBeforeFirstCallParameter: 30
PenaltyBreakComment: 10
PenaltyBreakFirstLessLess: 0
PenaltyBreakString: 10
PenaltyExcessCharacter: 100
PenaltyReturnTypeOnItsOwnLine: 60
PointerAlignment: Right
ReflowComments: false
SortIncludes: false
#SortUsingDeclarations: false # Unknown to clang-format-4.0
SpaceAfterCStyleCast: false
SpaceAfterTemplateKeyword: true
SpaceBeforeAssignmentOperators: true
#SpaceBeforeCtorInitializerColon: true # Unknown to clang-format-5.0
#SpaceBeforeInheritanceColon: true # Unknown to clang-format-5.0
SpaceBeforeParens: ControlStatements
#SpaceBeforeRangeBasedForLoopColon: true # Unknown to clang-format-5.0
SpaceInEmptyParentheses: false
SpacesBeforeTrailingComments: 1
SpacesInAngles: false
SpacesInContainerLiterals: false
SpacesInCStyleCastParentheses: false
SpacesInParentheses: false
SpacesInSquareBrackets: false
Standard: Cpp03
TabWidth: 8
UseTab: Always
...

1
.github/FUNDING.yml vendored Normal file
View File

@@ -0,0 +1 @@
open_collective: osmocom

3
.gitignore vendored
View File

@@ -20,6 +20,9 @@ tags
host/simtrace2-list
host/simtrace2-cardem-pcsc
host/contrib/simtrace2.spec
host/src/simtrace2-tool
host/tests
usb_strings_generated.h
firmware/usbstring/usbstring
firmware/apps/*/usb_strings.txt.patched
firmware/misc/crctool

3
.gitreview Normal file
View File

@@ -0,0 +1,3 @@
[gerrit]
host=gerrit.osmocom.org
project=simtrace2

14
Makefile
View File

@@ -8,13 +8,23 @@ fw-$(1)-$(2)-clean:
endef
$(eval $(call RULES,simtrace,dfu))
$(eval $(call RULES,simtrace,blupdate))
$(eval $(call RULES,simtrace,trace))
$(eval $(call RULES,simtrace,cardem))
$(eval $(call RULES,qmod,dfu))
$(eval $(call RULES,qmod,blupdate))
$(eval $(call RULES,qmod,cardem))
$(eval $(call RULES,ngff_cardem,dfu))
$(eval $(call RULES,ngff_cardem,blupdate))
$(eval $(call RULES,ngff_cardem,trace))
$(eval $(call RULES,ngff_cardem,cardem))
fw-clean: fw-simtrace-dfu-clean fw-simtrace-trace-clean fw-simtrace-cardem-clean fw-qmod-dfu-clean fw-qmod-cardem-clean
fw: fw-simtrace-dfu fw-simtrace-trace fw-simtrace-cardem fw-qmod-dfu fw-qmod-cardem
fw-clean: fw-simtrace-dfu-clean fw-simtrace-blupdate-clean fw-simtrace-trace-clean fw-simtrace-cardem-clean \
fw-qmod-dfu-clean fw-qmod-blupdate-clean fw-qmod-cardem-clean \
fw-ngff_cardem-dfu-clean fw-ngff_cardem-blupdate-clean fw-ngff_cardem-trace-clean fw-ngff_cardem-cardem-clean
fw: fw-simtrace-dfu fw-simtrace-blupdate fw-simtrace-trace fw-simtrace-cardem \
fw-qmod-dfu fw-qmod-blupdate fw-qmod-cardem \
fw-ngff_cardem-dfu fw-ngff_cardem-blupdate fw-ngff_cardem-trace fw-ngff_cardem-cardem
utils:
(cd host && \

15
README.md
View File

@@ -13,12 +13,17 @@ stack and host software.
Supported Hardware
------------------
* Osmocom SIMtrace 1.x with SAM3 controller
** this is open hardware and schematics / PCB design is published
* sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3)
** this is a proprietary device, publicly available from sysmocom
* Osmocom [SIMtrace2](https://osmocom.org/projects/simtrace2/wiki) with SAM3 controller
* this is open hardware and schematics / PCB design is published
* pre-built hardware available from [sysmocom webshop](https://shop.sysmocom.de/SIMtrace2-Hardware-Kit/simtrace2-kit)
* Osmocom [ngff-cardem](https://osmocom.org/projects/ngff-cardem/wiki) M.2/NGFF modem carrier with SAM3 controller
* this is open hardware and schematics / PCB design is published
* pre-built hardware available from [sysmocom webshoo](https://shop.sysmocom.de/M.2-modem-carrier-with-remote-SIM-tracing/ngff-cardem-kit-external)
* sysmocom [sysmoQMOD](https://sysmocom.de/products/lab/sysmoqmod/index.html) (with 4 Modems, 4 SIM slots and 2 SAM3)
* this is a proprietary device, publicly available from sysmocom
* hardware evaluation kit available from [sysmocom webshop](https://shop.sysmocom.de/sysmoQMOD-evaluation-kit/sysmoQMOD-evk)
* sysmocom OWHW (with 2 Modems and 1 SAM3 onboard)
** this is not publicly available hardware, but still supported
* this is not publicly available hardware, but still supported
This Repository
---------------

2
TODO-RELEASE
View File

@@ -8,3 +8,5 @@
# If any interfaces have been removed or changed since the last public release: c:r:0.
#library what description / commit summary line
simtrace2 API/ABI change osmo_st2_transport new member
simtrace2 API/ABI change cardemu_usb_msg_config new member
simtrace2 API/ABI change add function osmo_st2_cardem_request_config2()

4
contrib/flash.py
View File

@@ -27,7 +27,9 @@ class Device(NamedTuple):
DEVICE_SIMTRACE = Device(usb_vendor_id=0x1d50, usb_product_id=0x60e3, name="SIMtrace 2", url={"trace": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/simtrace-trace-dfu-latest.bin", "cardem": "https://osmocom.org/attachments/download/3868/simtrace-cardem-dfu.bin"})
DEVICE_QMOD = Device(usb_vendor_id=0x1d50, usb_product_id=0x4004, name="sysmoQMOD (Quad Modem)", url={"cardem": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/qmod-cardem-dfu-latest.bin"})
DEVICE_OWHW = Device(usb_vendor_id=0x1d50, usb_product_id=0x4001, name="OWHW", url={"cardem": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/owhw-cardem-dfu-latest.bin"})
DEVICES = [DEVICE_SIMTRACE, DEVICE_QMOD]
DEVICE_OCTSIMTEST = Device(usb_vendor_id=0x1d50, usb_product_id=0x616d, name="OCTSIMTEST", url={"cardem": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/octsimtest-cardem-dfu-latest.bin"})
DEVICE_NGFF_CARDEM = Device(usb_vendor_id=0x1d50, usb_product_id=0x616e, name="ngff-cardem", url={"cardem": "https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/ngff_cardem-cardem-dfu-latest.bin"})
DEVICES = [DEVICE_SIMTRACE, DEVICE_QMOD, DEVICE_OCTSIMTEST, DEVICE_NGFF_CARDEM]
# which firmware does the SIMtrace USN interface subclass correspond
FIRMWARE_SUBCLASS = {1: "trace", 2: "cardem"}

42
contrib/jenkins.sh
View File

@@ -27,19 +27,45 @@ verify_value_string_arrays_are_terminated.py $(find . -name "*.[hc]")
export PKG_CONFIG_PATH="$inst/lib/pkgconfig:$PKG_CONFIG_PATH"
export LD_LIBRARY_PATH="$inst/lib"
BUILDS=""
BUILDS+="simtrace/dfu simtrace/trace simtrace/cardem "
BUILDS+="qmod/dfu qmod/cardem "
BUILDS+="owhw/dfu owhw/cardem "
# dfu target MUST be built first, the combined targets need a bl that can be combined..
BUILDS="simtrace/dfu qmod/dfu owhw/dfu ngff_cardem/dfu "
#
BUILDS+="simtrace/blupdate qmod/blupdate owhw/blupdate ngff_cardem/blupdate "
BUILDS+="simtrace/cardem qmod/cardem owhw/cardem octsimtest/cardem ngff_cardem/cardem "
BUILDS+="simtrace/trace ngff_cardem/trace "
cd $TOPDIR/firmware
for build in $BUILDS; do
board=`echo $build | cut -d "/" -f 1`
app=`echo $build | cut -d "/" -f 2`
case "$build" in
"owhw/cardem")
comb="combined"
;;
"qmod/cardem")
comb="combined"
;;
"ngff_cardem/cardem")
comb="combined"
;;
"simtrace/trace")
comb="combined"
;;
*)
comb=""
;;
esac
echo
echo "=============== $board / $app START =============="
make BOARD="$board" APP="$app"
echo "=============== $board / $app RES:$? =============="
# Build the bootloader with clang, the rest with gcc (OS#5260, OS#6026)
if [ "$app" = "dfu" ]; then
echo "=============== $board / $app START (CLANG) =============="
PATH="/opt/llvm-arm/bin:$PATH" make USE_CLANG=1 BOARD="$board" APP="$app" $comb
echo "=============== $board / $app RES:$? =============="
else
echo "=============== $board / $app START (GCC) =============="
make USE_CLANG=0 BOARD="$board" APP="$app" $comb
echo "=============== $board / $app RES:$? =============="
fi
done
echo
@@ -63,8 +89,6 @@ make dist
# make -C "$base/doc/manuals" publish
#fi
rm -rf $TOPDIR/firmware/bin/simtrace-cardem*
if [ "x$publish" = "x--publish" ]; then
echo
echo "=============== UPLOAD BUILD =============="

10
contrib/prepare_upload.sh
View File

@@ -1,4 +1,4 @@
#!/bin/sh -e
#!/bin/bash -e
# Create copies of binaries with -latest, -$GIT_VERSION (OS#4413, OS#3452)
cd "$(dirname "$0")/.."
@@ -9,8 +9,10 @@ echo "Copying binaries with "-latest" and "-$GIT_VERSION" appended..."
cd firmware/bin
for ext in bin elf; do
for file in *."$ext"; do
without_ext="${file%.*}"
cp -v "$file" "$without_ext-latest.$ext"
cp -v "$file" "$without_ext-$GIT_VERSION.$ext"
if ! [[ "$file" =~ ^(.*padded.*|.*nocrcstub.*bin)$ ]];then
without_ext="${file%.*}"
cp -v "$file" "$without_ext-latest.$ext"
cp -v "$file" "$without_ext-$GIT_VERSION.$ext"
fi
done
done

299
contrib/simtrace.lua Normal file
View File

@@ -0,0 +1,299 @@
-- wireshark LUA dissector for the SIMtrace USB protocol
-- (C) 2021 by sysmocom - s.f.m.c. GmbH, Author: Eric Wild
-- SPDX-License-Identifier: GPL-2.0+
--
-- Usage: Move this file to your "personal lua plugins" folder that
-- can be found in the Wireshark Help->About Wireshark->Folders tab
-- Windows: %APPDATA%\Wireshark\plugins.
-- Unix-like systems: ~/.local/lib/wireshark/plugins.
usb_simtrace_protocol = Proto("USB_simtrace", "USB simtrace protocol")
local control_commands = {
-- /* SIMTRACE_MSGC_GENERIC */
[0x0000] = "SIMTRACE_CMD_DO_ERROR",
[0x0001] = "SIMTRACE_CMD_BD_BOARD_INFO",
-- /* SIMTRACE_MSGC_CARDEM */
[0x0101] = "DT_CEMU_TX_DATA",
[0x0102] = "DT_CEMU_SET_ATR",
[0x0103] = "BD_CEMU_STATS",
[0x0104] = "BD_CEMU_STATUS",
[0x0105] = "DT_CEMU_CARDINSERT",
[0x0106] = "DO_CEMU_RX_DATA",
[0x0107] = "DO_CEMU_PTS",
[0x0108] = "BD_CEMU_CONFIG",
-- /* SIMTRACE_MSGC_MODEM */
[0x0201] = "DT_MODEM_RESET",
[0x0202] = "DT_MODEM_SIM_SELECT",
[0x0203] = "BD_MODEM_STATUS",
-- /* SIMTRACE_MSGC_SNIFF */
[0x0300] = "SNIFF_CHANGE",
[0x0301] = "SNIFF_FIDI",
[0x0302] = "SNIFF_ATR",
[0x0304] = "SNIFF_TPDU",
[0x0303] = "SNIFF_PPS"
}
local msgtype = ProtoField.uint16("usb_simtrace.msgtype", "Message Type", base.HEX_DEC, control_commands)
local seqnr = ProtoField.uint8("usb_simtrace.seqnr", "Sequence Number", base.DEC)
local slotnr = ProtoField.uint8("usb_simtrace.slotnr", "Slot Number", base.DEC)
local reserved = ProtoField.uint16("usb_simtrace.reserved", "reserved", base.HEX_DEC)
local payloadlen = ProtoField.uint16("usb_simtrace.length", "length", base.DEC)
local payload = ProtoField.bytes("usb_simtrace.payload", "Data")
local pb_and_rx = ProtoField.uint32("usb_simtrace.pb_and_rx", "pb_and_rx", base.HEX_DEC, NULL, 0x8)
local pb_and_tx = ProtoField.uint32("usb_simtrace.pb_and_tx", "pb_and_tx", base.HEX_DEC, NULL, 0x4)
local final = ProtoField.uint32("usb_simtrace.final", "final", base.HEX_DEC, NULL, 0x2)
local tpdu_hdr = ProtoField.uint32("usb_simtrace.tpdu_hdr", "tpdu_hdr", base.HEX_DEC, NULL, 0x1)
local rxtxdatalen = ProtoField.uint16("usb_simtrace.rxtxdatalen", "rx/tx data length", base.DEC)
local rxtxdata = ProtoField.bytes("usb_simtrace.rxtxdata", "rx/tx (data)")
local hf_pts_len = ProtoField.uint8("usb_simtrace.pts_len", "PTS length", base.DEC)
local hf_pts_req = ProtoField.bytes("usb_simtrace.pts_req", "PTS request")
local hf_pts_resp = ProtoField.bytes("usb_simtrace.pts_resp", "PTS response")
local hf_cemu_cfg_features = ProtoField.uint32("usb_simtrace.cemu_cfg.features.status_irq", "CardEm Features", base.HEX)
local hf_cemu_cfg_slot_mux_nr = ProtoField.uint32("usb_simtrace.cemu_cfg.features.slot_mux_nr", "CardEm Slot Mux Nr", base.DEC)
local hf_cemu_cfg_presence_polarity = ProtoField.uint8("usb_simtrace.cemu_cfg.features.presence_polarity", "Sim presence polarity", base.DEC)
local card_insert_types = {
[0x00] = "not inserted",
[0x01] = "inserted",
}
local hf_cemu_cardinsert = ProtoField.uint8("usb_simtrace.cardinsert", "Card Insert", base.DEC, card_insert_types, 0xff)
local CEMU_STATUS_F_VCC_PRESENT = ProtoField.uint32("usb_simtrace.CEMU_STATUS.F_VCC_PRESENT", "VCC_PRESENT", base.HEX_DEC, NULL, 0x00000001)
local CEMU_STATUS_F_CLK_ACTIVE = ProtoField.uint32("usb_simtrace.CEMU_STATUS.F_CLK_ACTIVE", "CLK_ACTIVE", base.HEX_DEC, NULL, 0x00000002)
local CEMU_STATUS_F_RCEMU_ACTIVE = ProtoField.uint32("usb_simtrace.CEMU_STATUS.F_RCEMU_ACTIVE", "CEMU_ACTIVE", base.HEX_DEC, NULL, 0x00000004)
local CEMU_STATUS_F_CARD_INSERT = ProtoField.uint32("usb_simtrace.CEMU_STATUS.F_CARD_INSERT", "CARD_INSERT", base.HEX_DEC, NULL, 0x00000008)
local CEMU_STATUS_F_RESET_ACTIVE = ProtoField.uint32("usb_simtrace.CEMU_STATUS.F_RESET_ACTIVE", "RESET_ACTIVE", base.HEX_DEC, NULL, 0x00000010)
local CEMU_CONFIG_PRES_POL_PRES_H = ProtoField.uint32("usb_simtrace.CEMU_CONFIG.PRES_POL_PRES_H", "PRESENCE_HIGH", base.HEX_DEC, NULL, 0x00000001)
local CEMU_CONFIG_PRES_POL_VALID = ProtoField.uint32("usb_simtrace.CEMU_CONFIG.PRES_POL_VALID", "PRESENCE_VALID", base.HEX_DEC, NULL, 0x00000002)
local modem_reset_types = {
[0x00] = "de-assert",
[0x01] = "assert",
[0x02] = "pulse"
}
local modem_reset_status = ProtoField.uint8("usb_simtrace.modem.reset_type", "modem reset type", base.HEX, modem_reset_types, 0xf)
local modem_reset_len = ProtoField.uint8("usb_simtrace.modem.reset_len", "modem reset length (ms)", base.DEC)
local modem_sim_select_types = {
[0x00] = "local",
[0x01] = "remote",
}
local hf_modem_sim_select = ProtoField.uint8("usb_simtrace.modem.sim_select", "SIM card selection", base.DEC, modem_sim_select_types, 0xff)
usb_simtrace_protocol.fields = {
msgtype, seqnr, slotnr, reserved, payloadlen, payload,
pb_and_rx, pb_and_tx, final, tpdu_hdr, rxtxdatalen, rxtxdata,
CEMU_STATUS_F_VCC_PRESENT, CEMU_STATUS_F_CLK_ACTIVE, CEMU_STATUS_F_RCEMU_ACTIVE, CEMU_STATUS_F_CARD_INSERT, CEMU_STATUS_F_RESET_ACTIVE,
CEMU_CONFIG_PRES_POL_PRES_H, CEMU_CONFIG_PRES_POL_VALID,
modem_reset_status, modem_reset_len,
hf_pts_len, hf_pts_req, hf_pts_resp,
hf_cemu_cfg_features, hf_cemu_cfg_slot_mux_nr, hf_cemu_cfg_presence_polarity,
hf_cemu_cardinsert, hf_modem_sim_select,
}
local is_hdr = Field.new("usb_simtrace.tpdu_hdr")
local is_pbrx = Field.new("usb_simtrace.pb_and_rx")
local is_pbtx = Field.new("usb_simtrace.pb_and_tx")
local is_final= Field.new("usb_simtrace.final")
function dissect_rxtx(payload_data,pinfo,tree)
local headerSubtree = tree:add(usb_simtrace_protocol, payload_data, "rx/tx data")
local len = payload_data(4,2):le_uint();
local cmd32 = payload_data(0,4):le_uint();
headerSubtree:add(pb_and_rx, cmd32)
headerSubtree:add(pb_and_tx, cmd32)
headerSubtree:add(final, cmd32)
headerSubtree:add(tpdu_hdr, cmd32)
headerSubtree:add(rxtxdatalen, len)
headerSubtree:add_le(rxtxdata, payload_data(6,len))
local flagstr = " "
if is_pbrx().value == 1 then
flagstr = flagstr .. "R"
else
flagstr = flagstr .. "."
end
if is_pbtx().value == 1 then
flagstr = flagstr .. "T"
else
flagstr = flagstr .. "."
end
if is_final().value == 1 then
flagstr = flagstr .. "F"
else
flagstr = flagstr .. "."
end
if is_hdr().value == 1 then
flagstr = flagstr .. "H"
else
flagstr = flagstr .. "."
end
flagstr = flagstr .. " "
pinfo.cols.info:append(flagstr .. payload_data(6,len))
-- ghetto dissection does not work due to mixed in procedure bytes
--if pinfo.visited == false then
-- Dissector.get("iso7816"):call(payload_data(6):tvb(), pinfo, tree)
-- local offs = 0
-- if (is_pbrx().value == 1 or is_pbtx().value == 1) and is_final().value == 0 then
-- offs = 1
-- else
-- offs = 0
-- end
--
-- if is_hdr().value == 1 then
-- Dissector.get("gsm_sim"):call(concatss:tvb(), pinfo, tree)
-- concatss = payload_data(6):bytes()
-- else
-- concatss = concatss .. payload_data(6+offs):bytes()
-- end
--end
end
function dissect_status(payload_data,pinfo,tree)
local headerSubtree = tree:add(usb_simtrace_protocol, payload_data, "status message")
local cmd32 = payload_data(0,4):le_uint();
headerSubtree:add(CEMU_STATUS_F_VCC_PRESENT, cmd32)
headerSubtree:add(CEMU_STATUS_F_CLK_ACTIVE, cmd32)
headerSubtree:add(CEMU_STATUS_F_RCEMU_ACTIVE, cmd32)
headerSubtree:add(CEMU_STATUS_F_CARD_INSERT, cmd32)
headerSubtree:add(CEMU_STATUS_F_RESET_ACTIVE, cmd32)
pinfo.cols.info:append(" VCC:" .. payload_data(0,1):bitfield(7, 1) .. " CLK:" .. payload_data(0,1):bitfield(6, 1) .. " RESET:" .. payload_data(0,1):bitfield(3, 1))
end
function dissect_atr(payload_data,pinfo,tree)
local len = payload_data(0,1):le_uint()
Dissector.get("iso7816.atr"):call(payload_data(1):tvb(), pinfo, tree)
end
function dissect_modem_reset(payload_data,pinfo,tree)
local headerSubtree = tree:add(usb_simtrace_protocol, payload_data, "modem reset")
local cmd8 = payload_data(0,1):le_uint();
headerSubtree:add(modem_reset_status, cmd8)
pinfo.cols.info:append(" reset type:" .. modem_reset_types[cmd8]);
if(cmd8 == 2) then
local duration = payload_data(1,2):le_uint()
headerSubtree:add(modem_reset_len, duration)
pinfo.cols.info:append(" duration:" .. duration .. "ms")
end
end
function dissect_pts(payload_data, pinfo, tree)
local subtree = tree:add(usb_simtrace_protocol, payload_data, "PTS")
local pts_len = payload_data(0,1):le_uint()
local pts_req = payload_data(1, pts_len);
local pts_resp = payload_data(7, pts_len);
subtree:add(hf_pts_len, pts_len);
subtree:add(hf_pts_req, pts_req);
subtree:add(hf_pts_resp, pts_resp);
pinfo.cols.info:append(" Req: " .. pts_req .. ", Resp: " .. pts_resp);
end
function dissect_cemu_config(payload_data, pinfo, tree)
local subtree = tree:add(usb_simtrace_protocol, payload_data, "Card Emu Config")
subtree:add(hf_cemu_cfg_features, payload_data(0,4));
if payload_data:len() >= 4 then
subtree:add(hf_cemu_cfg_slot_mux_nr, payload_data(4,1));
end
if payload_data:len() >= 5 then
local pres = payload_data(5,1):le_uint();
subtree:add(hf_cemu_cfg_presence_polarity, payload_data(5,1));
headerSubtree:add(CEMU_CONFIG_PRES_POL_PRES_H, pres)
headerSubtree:add(CEMU_CONFIG_PRES_POL_VALID, pres)
end
end
function dissect_modem_sim_sel(payload_data, pinfo, tree)
local subtree = tree:add(usb_simtrace_protocol, payload_data, "Modem SIM Select")
local sim_select = payload_data(0,1):le_uint();
subtree:add(hf_modem_sim_select, sim_select);
pinfo.cols.info:append(" " .. modem_sim_select_types[sim_select]);
end
function dissect_cemu_cardinsert(payload_data, pinfo, tree)
local subtree = tree:add(usb_simtrace_protocol, payload_data, "Card Insert")
local cins_type = payload_data(0,1):le_uint()
subtree:add(hf_cemu_cardinsert, cins_type);
pinfo.cols.info:append(" " .. card_insert_types[cins_type]);
end
function usb_simtrace_protocol.dissector(buffer, pinfo, tree)
length = buffer:len()
if length == 0 then return end
pinfo.cols.protocol = usb_simtrace_protocol.name
local subtree = tree:add(usb_simtrace_protocol, buffer(), "USB simtrace Data")
local command = buffer(0,2):uint()
subtree:add(msgtype, command):set_generated()
subtree:add(seqnr, buffer(2,1))
subtree:add(slotnr, buffer(3,1))
subtree:add_le(payloadlen, buffer(6,2))
pinfo.cols.info = string.format("Cmd 0x%04X : %s", command, control_commands[command])
local payload_data = buffer(8,length-8)
if(command == 0x0101 or command == 0x0106) then
return dissect_rxtx(payload_data(),pinfo,subtree)
elseif(command == 0x0104) then
return dissect_status(payload_data(),pinfo,subtree)
elseif(command == 0x0102) then
return dissect_atr(payload_data(),pinfo,subtree)
elseif(command == 0x0105) then
return dissect_cemu_cardinsert(payload_data(),pinfo,subtree)
elseif(command == 0x0107) then
return dissect_pts(payload_data(),pinfo,subtree)
elseif(command == 0x0108) then
return dissect_cemu_config(payload_data(),pinfo,subtree)
elseif(command == 0x0201) then
return dissect_modem_reset(payload_data(),pinfo,subtree)
elseif(command == 0x0202) then
return dissect_modem_sim_sel(payload_data(),pinfo,subtree)
else
subtree:add(payload, payload_data)
end
end
function usb_simtrace_protocol.init()
local usb_product_dissectors = DissectorTable.get("usb.product")
usb_product_dissectors:add(0x1d50616d, usb_simtrace_protocol) -- OCTSIMTEST
usb_product_dissectors:add(0x1d50616e, usb_simtrace_protocol) -- NGFF_CARDEM
usb_product_dissectors:add(0x1d5060e3, usb_simtrace_protocol) -- SIMTRACE2
usb_product_dissectors:add(0x1d504004, usb_simtrace_protocol) -- QMOD
usb_product_dissectors:add(0x1d504001, usb_simtrace_protocol) -- OWHW
DissectorTable.get("usb.device"):add_for_decode_as(usb_simtrace_protocol)
DissectorTable.get("usb.bulk"):add(0xffff, usb_simtrace_protocol)
DissectorTable.get("usb.interrupt"):add(0xffff, usb_simtrace_protocol)
end

207
debian/changelog vendored
View File

@@ -1,8 +1,211 @@
simtrace2 (0.5.2) UNRELEASED; urgency=medium
simtrace2 (0.8.1) unstable; urgency=medium
* host/contrib/simtrace2.spec.in: fix soname
-- Oliver Smith <osmith@sysmocom.de> Fri, 10 Dec 2021 10:04:28 +0100
simtrace2 (0.8.0) unstable; urgency=medium
[ Harald Welte ]
* adapt to host tools in autotools
* simtrace2_api: Remove dead code
* fix baudrate of 'make log'
* qmod DFU: Don't overwrite memory beyond end of usb_strings[]
* usb_strings.txt: s/SIMtrace Phone/SIMtrace Card Emulation/
* Patch actual board name into the USB iProduct string descriptor
* Build only 'reasonable' combinations of APP/MEMORY
* stdio: Add support for %p format string (pointer address)
* Fix format string related warnings (int vs. long)
* Add missing CR to achieve CRLF at end of log lines
* more comments in host_communication.c.
* usb_buf: count number of elements in queue
* usb_buf: Limit the maximum queue length to 3 elements
* qmod: Don't print EEPROM operations in help when not supported
* cosmetic: board_qmod: Annotate #endif with comments
* qmod: Document '!' and '@' commands on UART
* implement minimalistic talloc_report(); add 't' command on UART
* update copyright statement
* cardem: Fix memory leak on unsupported SIMTRACE_MSGT_DT_CEMU_CARDINSERT
* usb_buf: Actually limit queue to 3 elements, not 4
* USBD_HAL: Don't disable UDP peripheral clock on suspend
* usb_buf: Properly initialize buffered_endpoint->ep number
* pseudo_talloc: Increment number of buffers from 10 to 20
* card_emu: Factor out card_handle_reset() from card_emu_init()
* cardem: Move card_emu_io_statechg() calls out of interrupt context
* cardem: RST resets all state (including release of buffers)
* host_communication: Send zero-length-packet on wMaxPacketSize
* card_emu: Initialize PTSS state every time we start PTS
* card_emu: Avoid recursive calls to card_set_state()
* card_emu: Always print state names in string representation
* card_emu: Remove extraneous code
* card_emu: Remove extraneous initialization of ch->pts.state
* cardem: Make card_emu_report_status() optionally use IRQ endpoint
* cardem: Add SIMTRACE_MSGT_BD_CEMU_CONFIG
* cardem: Implement support for CEMU_FEAT_F_STATUS_IRQ
* simtrace2-sniff: Reformat value_string to pass our validation scripts
* firmware: Reformat value_string to pass our validation scripts
* jenkins.sh: Add verify_value_string_arrays_are_terminated.py
* [lib] apdu_dispatch: Use DLGLOBAL and don't printf() directly
* [lib] apdu_dispatch: Don't print APDU state to stdout
* OSMO_ASSERT() on double-free or invalid pointer
* Update .gitignore file for host
* migrate to libosmousb
* library: Add osmo_st2_compatible_dev_idsp[]
* firmware: move printing of welcome banner to common function print_banner()
* firmware: apps/cardem/main.c: Synchronize with apps/trace/main.c
* host: Add COPYING file for host software (GPLv2)
* host/lib/gsmtap.c: Add GPLv2 disclaimer
* increase ringbuffer size from 512 to 1024 bytes
* simtrace2_api: Add osmo_st2_cardem_request_config()
* Disable interrupts during EEFC_ReadUniqueID()
* cardem: Fix infinite loop + watchdog reset on long OUT message
* extend osmo_st2_cardem_inst with fields required by osmo-remsim
* cosmetic: Add missing CR to LF in dispatch_received_usb_msg()
* USBD.c: Don't reset EP0 on SetConfiguration(0)
* pio_it.c: Permit repeated calls to PIO_ConfigureIt()
* simtrace2_siff: getopt_long() returns int, not char
* Introduce support for asynchronous USB transmission
* firmware: fix builds with gcc stack smashing protection enabled
* dfu: Shrink code by 144 bytes (by not calling PIO_InitializeInterrupts)
* dfu: Save another 60 bytes by changing the way we print horizontal lines
* migrate from BSC_FD_* to OSMO_FD_*
* remove usb2udp
* rename simtrace2-remsim to simtrace2-cardem-pcsc
* Update README
* remove old pre-autoconf makefile
* simtrace2-cardem-pcsc: Make it work again
* Revert "add ISO 7816-3 library to remsim project"
* Revert "add library providing ISO 7816-3 utilities"
* card_emu: waiting_time is stored in etu, not clocks.
* card_emu: Rename fi to Fi and di to Di
* card_emu: Clarify and differentiate F/Fi/F_index/Fi_index
* iso7816_fidi: Add iso7816_3_ prefix to symbols; fix terminology
* card_emu: improve reset detection conditions
* card_emu: explicitly initialize PTS and TPDU states
* card_emu: Use USART timeout for waiting time
* card_emu: Fix USART timer, particularly in re-start situations
* card_emu: Fix computation of waiting time
* contrib/jenkins.sh: Switch from rita -> ftp.osmocom.org
* st2-cardem-pcsc: Fix goto-in-while mess
* st2-cardem-pcsc: Use ATR of real card by default
* simtrace board.h: Enable HAVE_CARDEM if we build the cardem firmware
* jenkins.sh: build 'cardem' firmware also for simtrace board
* Revert "cardem: disable upload for simtrace2"
* simtrace2-cardem-pcsc: Decode STATUS flags to strings
* simtrace2-cardem-pcsc: Reset the real card if reader resets cardem
* assert: Use printf_sync() to ensure printing of assert / panic
* Add usb product ID of sysmoOCTSIMTEST
* octsimtest: remove lots of unused #defines
* octsimtest: most code for support of this new board
* octsimtest: Switch direction of I/O level shifter depending on uart tx / rx
* cardem-pcsc: initialize libosmocore logging
* octsimtest: Adjust VCC voltage thresholds (resistive VCC divider)
* contrib/jenkins.sh: Build 'cardem' app for 'octsimtest' board
* firmware: octsimtest: Fix IO_DIR pin definition
* firmware: octsimtest: Make slot mux configurable via USB
* firmware: octsimtest: mcp23017 initializaiton
* firmware: cardem: re-factor CARDINSERT command processing
* firmware: octsimtest: Support SIMTRACE_MSGT_DT_CEMU_CARDINSERT
* firmware: octsimtest: use TRACE_* macros instead of direct printf
* firmware: octsimtest: Fix disabling the card_insert signal
* firmware: octsimtest: Add i/I command for setting card-insert via I2C GPIO
* firmware: octsimtest: ensure all card_insert GPIO are 0 after reset
* don't printf() directly from library code, go via libosmocore logging
* simtrace2-list: Use osmo_st2_compatible_dev_ids[]
* board_gpio.gnumeric: Add ngff-cardem pin-out
* 99-simtrace2.rules: Add OCTSIMTEST
* contrib/flash.py: Add OCTSIMTEST support
* Introduce simtrace2-tool
* introduce support for new ngff_cardem board
* simtrace2.spec: Add simtrace2-tool binary to package
* contrib/jenkins.sh: Build APP=cardem for BOARD=ngff_cardem
* jenkins.sh: Build 'trace' firmware for ngff_cardem
* Use osmo_libusb_{init,exit}() instead of libusb_{init,exit}()
* simtrace2-cardem-pcsc: Remove double libusb initialization
* simtrace2-tool: Initialize logging to avoid error on first log output
* cardem-pcsc: Fix return of uninitialized variable
* host: Upgrade libosmocore dependency to 1.4.0
-- Harald Welte <lafore@gnumonks.org> Thu, 28 Nov 2019 00:44:57 +0100
[ Kévin Redon ]
* minor: fix spacing
* minor: updated copyright years
* dfu: minor: make debug output only verbose in info level
* minor: move USB debug output from info to debug level
* minor: improve debug output
* minor : fix typo in comment
* better detect VCC and nRST changes on simtrace2 board
* minor: ignore usbstring binary
* simtrace2-remsim: Use simplest ATR
* cardem: use simplest ATR as default ATR
* minor: fix typo
* DFU: increase USB reset duration to 50 ms
* DFU: restart bootloader when USB conf failed
* Makefile: add linker option showing memory usage
* improve shared bootloader/application memory
* minor: improve trace output
* DFU: add DFU application
* add script to flash latest firmware
* minor: use same LED pattern for cardem as other applications
* cardem: currently simtrace does not support cardem
* add library providing ISO 7816-3 utilities
* add ISO 7816-3 library to remsim project
* rename PIN_PHONE_{CLK,IO} to PIN_USIM1_{CLK,IO}
* minor add comments
* make sim switch board specific
[ Eric Wild ]
* remsim: allow selecting pcsc reader number
* cardem: disable upload for simtrace2
* firmware: do not allow undefined symbols
* firmware: allow verbose builds
* cardem: choose a more reasonable default ATR
* contrib: add a basic simtrace lua dissector for wireshark
* cardem: free the buf
* cardemu: support 1v8 for the tester
* firmware: data sections
* firmware: proper makefile deps
* firmware: make the ngff beakout blink
* simtrace2-cardem: use local sim on exit
* contrib: more cardem dissection
* firmware: trace for ngff
* cardem: fix spurious NULL bytes during transfers
* contrib/jenkins.sh: build ngff_Cardem dfu bootloader
* contrib: allow manually forcing bulk simtrace dissection
* contrib/jenkins.sh: lower trace to make bl fit
* Revert "firmware: data sections"
* add the ngff cardem to default build targets
* drop unused exidx sections when linking
* clang build support
* fix bootloader led config crash
* firmware: add bootloader update "app"
* firmware: remove usb pullup that dates back to simtrace1
* firmware: increase reset delay before usb reattach
* firmware: drop cref printing
* add our default clang-format file
* firmware: add missing usb strings to blupdate that prevented building it
* jenkins: build bootloader updater
* firmware: remove dfu-dfu default target
[ Oliver Smith ]
* contrib: import RPM spec
* contrib: integrate RPM spec
* d/source/format: new file
* firmware/Makefile: fix UNKNOWN in OBS packages
* host: use git-version-gen/tarball-v. from topdir
* gitignore: add firmware/apps/*/usb_strings.txt.patched
* firmware: create duplicate files for upload only
* contrib/prepare_upload.sh: fix cd problems
* firmware: qmod-dfu: disable stack protector
* firmware: disable stack protector by default
* gitreview: new file
[ Leonard Hübner ]
* remsim: adding cli argument to set the atr
[ Eric ]
* dfu: let the device reset itself
-- Harald Welte <laforge@osmocom.org> Thu, 09 Dec 2021 08:12:56 +0100
simtrace2 (0.5.1) unstable; urgency=medium

2
debian/compat vendored
View File

@@ -1 +1 @@
9
10

16
debian/control vendored
View File

@@ -1,8 +1,8 @@
Source: simtrace2
Maintainer: Harald Welte <laforge@gnumonks.org>
Maintainer: Osmocom team <openbsc@lists.osmocom.org>
Section: devel
Priority: optional
Build-Depends: debhelper (>= 9),
Build-Depends: debhelper (>= 10),
autotools-dev,
autoconf,
automake,
@@ -10,14 +10,14 @@ Build-Depends: debhelper (>= 9),
pkg-config,
git,
dh-autoreconf,
libosmocore-dev,
libosmocore-dev (>= 1.4.0),
libpcsclite-dev,
libnewlib-arm-none-eabi,
libusb-1.0-0-dev,
gcc-arm-none-eabi
Standards-Version: 3.9.8
Vcs-Git: git://git.osmocom.org/simtrace2.git
Vcs-Browser: http://git.osmocom.org/simtrace2/
Vcs-Git: https://gitea.osmocom.org/sim-card/simtrace2
Vcs-Browser: https://gitea.osmocom.org/sim-card/simtrace2
Homepage: http://osmocom.org/projects/simtrace2/wiki
Package: simtrace2-firmware
@@ -33,11 +33,11 @@ Package: simtrace2-utils
Section: devel
Architecture: any
Multi-Arch: same
Depends: ${shlibs:Depends}, ${misc:Depends}, libosmo-simtrace2-0
Depends: ${shlibs:Depends}, ${misc:Depends}, libosmo-simtrace2-1
Recommends: simtrace2-firmware
Description: Host utilities to communicate with SIMtrace2 USB Devices.
Package: libosmo-simtrace2-0
Package: libosmo-simtrace2-1
Section: libs
Architecture: any
Multi-Arch: same
@@ -52,7 +52,7 @@ Package: libosmo-simtrace2-dev
Section: libdevel
Architecture: any
Multi-Arch: same
Depends: libosmo-simtrace2-0, ${misc:Depends}
Depends: libosmo-simtrace2-1, ${misc:Depends}
Description: Development headers for Osmocom SIMtrace2 library
This library contains core "driver" functionality to interface with the
Osmocom SIMtrace2 (and compatible) USB device firmware. It enables

0
debian/libosmo-simtrace2-0.install → debian/libosmo-simtrace2-1.install vendored
View File

5
debian/rules vendored
View File

@@ -13,7 +13,4 @@ export DEB_LDFLAGS_MAINT_STRIP = -Wl,-Bsymbolic-functions
%:
dh $@
override_dh_autoreconf:
cd host && dh_autoreconf
dh $@ --no-parallel

118
firmware/Makefile
View File

@@ -29,6 +29,13 @@
# Makefile for compiling the Getting Started with SAM3S Microcontrollers project
GIT_VERSION=$(shell $(TOP)/git-version-gen $(TOP)/.tarball-version)
CFLAGS = \
-Werror=format-security \
-Wformat \
-g \
$(NULL)
#-------------------------------------------------------------------------------
# User-modifiable options
#-------------------------------------------------------------------------------
@@ -49,7 +56,8 @@ APP ?= dfu
# Defines which are the available memory targets for the SAM3S-EK board.
ifeq ($(APP), dfu)
MEMORIES ?= flash dfu
MEMORIES ?= flash
TRACE_LEVEL ?= 0
else
MEMORIES ?= dfu
endif
@@ -72,12 +80,20 @@ AT91LIB_USB_DFU_PATH = $(AT91LIB)/usb/device/dfu
# Tool suffix when cross-compiling
CROSS_COMPILE = arm-none-eabi-
LIBS = -Wl,--start-group -lgcc -Wl,--end-group -nostdlib
# Compilation tools
USE_CLANG ?= 0
ifneq ("$(USE_CLANG)","0")
# --target=thumbv7m-none-eabi
CC = clang
LD = ld.lld
SIZE = llvm-size
LIBS = -nostdlib
else
CC = $(CROSS_COMPILE)gcc
LD = $(CROSS_COMPILE)ld
SIZE = $(CROSS_COMPILE)size
LIBS = -Wl,--start-group -lgcc -Wl,--end-group -nostdlib
endif
STRIP = $(CROSS_COMPILE)strip
OBJCOPY = $(CROSS_COMPILE)objcopy
GDB = $(CROSS_COMPILE)gdb
@@ -108,7 +124,7 @@ C_LIBUSB = USBDescriptors.c USBRequests.c USBD.c USBDCallbacks.c USBDDriver.
C_LIBUSB_RT = dfu.c dfu_runtime.c
C_LIBUSB_DFU = dfu.c dfu_desc.c dfu_driver.c
C_LIBCOMMON = string.c stdio.c fputs.c usb_buf.c ringbuffer.c pseudo_talloc.c host_communication.c \
main_common.c stack_check.c
main_common.c stack_check.c crcstub.c
C_BOARD = $(notdir $(wildcard libboard/common/source/*.c))
C_BOARD += $(notdir $(wildcard libboard/$(BOARD)/source/*.c))
@@ -138,7 +154,11 @@ ALLOW_PEER_ERASE?=0
#CFLAGS+=-DUSB_NO_DEBUG=1
# Optimization level, put in comment for debugging
ifneq ("$(USE_CLANG)","0")
OPTIMIZATION ?= -Oz
else
OPTIMIZATION ?= -Os
endif
# Flags
INCLUDES_USB = -I$(AT91LIB)/usb/include -I$(AT91LIB)
@@ -152,6 +172,11 @@ INCLUDES += -Ilibosmocore/include
INCLUDES += -Isrc_simtrace -Iinclude
INCLUDES += -Iapps/$(APP)
ifneq ("$(USE_CLANG)","0")
CFLAGS += -Wno-unknown-warning-option -Wno-empty-body -fno-exceptions -fno-unwind-tables --config armv7em_soft_nofp_nosys
else
CFLAGS += -Wno-suggest-attribute=noreturn --param max-inline-insns-single=500
endif
CFLAGS += -Wall -Wchar-subscripts -Wcomment -Wimplicit-int -Wformat=2
CFLAGS += -Werror-implicit-function-declaration -Wmain -Wparentheses
CFLAGS += -Wsequence-point -Wreturn-type -Wswitch -Wtrigraphs #-Wunused
@@ -164,16 +189,16 @@ CFLAGS += -Wredundant-decls -Wnested-externs #-Winline -Wlong-long
CFLAGS += -Wunreachable-code
#CFLAGS += -Wcast-align
#CFLAGS += -std=c11
CFLAGS += -Wmissing-noreturn
#CFLAGS += -Wmissing-noreturn
#CFLAGS += -Wconversion
CFLAGS += -Wno-unused-but-set-variable -Wno-unused-variable
CFLAGS += -Wno-suggest-attribute=noreturn
# -mlong-calls -Wall
#CFLAGS += -save-temps -fverbose-asm
#CFLAGS += -Wa,-a,-ad
CFLAGS += -D__ARM -fno-builtin
CFLAGS += --param max-inline-insns-single=500 -mcpu=cortex-m3 -mthumb # -mfix-cortex-m3-ldrd
CFLAGS += -mcpu=cortex-m3 -mthumb # -mfix-cortex-m3-ldrd
CFLAGS += -ffunction-sections -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -DTRACE_LEVEL=$(TRACE_LEVEL) -DALLOW_PEER_ERASE=$(ALLOW_PEER_ERASE)
CFLAGS += -DGIT_VERSION=\"$(GIT_VERSION)\"
CFLAGS += -DBOARD=\"$(BOARD)\" -DBOARD_$(BOARD)
@@ -187,7 +212,10 @@ CFLAGS += -fno-stack-protector
endif
ASFLAGS = -mcpu=cortex-m3 -mthumb -Wall -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -D__ASSEMBLY__
LDFLAGS = -mcpu=cortex-m3 -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=ResetException -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--print-memory-usage -Wl,--no-undefined $(LIB)
LDFLAGS = -mcpu=cortex-m3 -mthumb -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=ResetException -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--no-undefined $(LIB)
ifeq ("$(USE_CLANG)","0")
LDFLAGS += -Wl,--warn-section-align -Wl,--print-memory-usage
endif
#LD_OPTIONAL=-Wl,--print-gc-sections -Wl,--stats
# Append BIN directories to output filename
@@ -197,7 +225,7 @@ OUTPUT := $(BIN)/$(OUTPUT)
# Rules
#-------------------------------------------------------------------------------
all: apps/$(APP)/usb_strings_generated.h $(BIN) $(OBJ) $(MEMORIES)
all: $(BIN) $(OBJ) $(MEMORIES)
combined: $(OUTPUT)-combined.bin
@@ -208,12 +236,15 @@ $(BIN)/$(BOARD)-dfu-flash-padded.bin: $(BIN)/$(BOARD)-dfu-flash.bin
$(OUTPUT)-combined.bin: $(BIN)/$(BOARD)-dfu-flash-padded.bin $(OUTPUT)-dfu.bin
cat $^ > $@
$(BIN) $(OBJ):
$(BIN) $(OBJ): apps/$(APP)/usb_strings_generated.h misc/crctool
mkdir -p $@
usbstring/usbstring: usbstring/usbstring.c
gcc $^ -o $@
misc/crctool: misc/crctool.c
gcc $^ -o $@
.PHONY: apps/$(APP)/usb_strings.txt.patched
apps/$(APP)/usb_strings.txt.patched: apps/$(APP)/usb_strings.txt
sed "s/PRODUCT_STRING/$(shell cat libboard/$(BOARD)/product_string.txt)/" $< > $@
@@ -224,29 +255,70 @@ apps/$(APP)/usb_strings_generated.h: apps/$(APP)/usb_strings.txt.patched usbstri
define RULES
C_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(C_OBJECTS))
ASM_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(ASM_OBJECTS))
EXTRA_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(EXTRA_OBJECTS))
$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1))
$(SILENT)$(CC) $(LDFLAGS) $(LD_OPTIONAL) -T"libboard/common/resources/$(CHIP)/$$@.ld" -Wl,-Map,$(OUTPUT)-$$@.map -o $(OUTPUT)-$$@.elf $$^ $(LIBS)
$(SILENT)$(NM) $(OUTPUT)-$$@.elf >$(OUTPUT)-$$@.elf.txt
$(SILENT)$(OBJCOPY) -O binary $(OUTPUT)-$$@.elf $(OUTPUT)-$$@.bin
$(SILENT)$(SIZE) $$^ $(OUTPUT)-$$@.elf
build_$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1)) $$(EXTRA_OBJECTS_$(1))
$(SILENT)$(CC) $(CFLAGS) $(LDFLAGS) $(LD_OPTIONAL) -T"libboard/common/resources/$(CHIP)/$(1).ld" -Wl,-Map,$(OUTPUT)-$(1).map -o $(OUTPUT)-$(1).elf $$^ $(LIBS)
$(SILENT)$(NM) $(OUTPUT)-$(1).elf >$(OUTPUT)-$(1).elf.txt
$(SILENT)$(OBJCOPY) -O binary $(OUTPUT)-$(1).elf $(OUTPUT)-$(1).bin
$$(C_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.c Makefile $(OBJ) $(BIN)
@echo [COMPILING $$<]
$(SILENT)$(CC) $(CFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -Wa,-ahlms=$(BIN)/$$*.lst -c -o $$@ $$<
$(SILENT)$(CC) $(CFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -c -o $$@ $$<
$$(ASM_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.S Makefile $(OBJ) $(BIN)
@echo [ASSEMBLING $$@]
$(SILENT)@$(CC) $(ASFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -c -o $$@ $$<
$(SILENT)$(CC) $(ASFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -c -o $$@ $$<
debug_$(1): $(1)
$(GDB) -x "$(BOARD_LIB)/resources/gcc/$(BOARD)_$(1).gdb" -ex "reset" -readnow -se $(OUTPUT)-$(1).elf
endef
$(foreach MEMORY, $(MEMORIES), $(eval $(call RULES,$(MEMORY))))
ALL_MEMORIES = flash ram
$(foreach MEMORY, $(ALL_MEMORIES), $(eval $(call RULES,$(MEMORY))))
# files with those names do exist..
.PHONY: dfu
dfu: $(OUTPUT)-dfu.bin
.PHONY: ram
ram: build_ram
.PHONY: flash
flash: build_flash
#alternate way of embedding: obj file
#ifeq ($(APP), dfu)
# $(info bootloader bin file to obj..)
# $(SILENT)$(OBJCOPY) --rename-section .data=.fwupdate -I binary -O elf32-littlearm bin/$(BOARD)-dfu-flash.bin $(OBJ)/flash_fwupdate.o
#endif
C_OBJECTS_dfu = $(addprefix $(OBJ)/dfu_, $(C_OBJECTS))
ASM_OBJECTS_dfu = $(addprefix $(OBJ)/dfu_, $(ASM_OBJECTS))
EXTRA_OBJECTS_dfu = $(addprefix $(OBJ)/dfu_, $(EXTRA_OBJECTS))
$(OUTPUT)-dfu.bin: $(OUTPUT)-dfu_nocrcstub.bin
$(info updating app with crc..)
$(SILENT)cp $< $@.temp
$(SILENT)misc/crctool 512 $@.temp
$(SILENT)mv $@.temp $@
$(OUTPUT)-dfu_nocrcstub.bin: $(OUTPUT)-dfu_nocrcstub.elf
ifeq ($(APP), blupdate)
$(info updating updater section with padded bootloader file..)
$(SILENT)dd status=none if=/dev/zero bs=16384 count=1 of=$(BIN)/$(BOARD)-dfu-flash-padded.bin
$(SILENT)dd status=none if=$(BIN)/$(BOARD)-dfu-flash.bin conv=notrunc of=$(BIN)/$(BOARD)-dfu-flash-padded.bin
$(SILENT)$(OBJCOPY) --update-section .blupdate=bin/$(BOARD)-dfu-flash-padded.bin $<
endif
$(SILENT)$(OBJCOPY) -O binary $< $@
$(OUTPUT)-dfu_nocrcstub.elf: $(ASM_OBJECTS_dfu) $(C_OBJECTS_dfu) $(EXTRA_OBJECTS_dfu)
$(SILENT)$(CC) $(CFLAGS) $(LDFLAGS) $(LD_OPTIONAL) -T"libboard/common/resources/$(CHIP)/dfu.ld" -Wl,-Map,$(OUTPUT)-dfu_nocrcstub.map -o $@ $^ $(LIBS)
$(SILENT)$(NM) $@ >$@.txt
$(C_OBJECTS_dfu): $(OBJ)/dfu_%.o: %.c Makefile $(OBJ) $(BIN)
@echo [COMPILING $<]
$(SILENT)$(CC) $(CFLAGS) -DENVIRONMENT_dfu -DENVIRONMENT=\"dfu\" -c -o $@ $<
$(ASM_OBJECTS_dfu): $(OBJ)/dfu_%.o: %.S Makefile $(OBJ) $(BIN)
@echo [ASSEMBLING $@]
$(SILENT)$(CC) $(ASFLAGS) -DENVIRONMENT_dfu -DENVIRONMENT=\"dfu\" -c -o$@ $<
program:
openocd -f openocd/openocd.cfg -c "init" -c "halt" -c "flash write_bank 0 ./bin/project-flash.bin 0" -c "reset" -c "shutdown"
SERIAL ?= /dev/ttyUSB0
log:

12
firmware/apps/blupdate/Makefile Normal file
View File

@@ -0,0 +1,12 @@
C_FILES += $(C_LIBUSB_DFU)
# Trace level used for compilation
# (can be overridden by adding TRACE_LEVEL=#number to the command-line)
# TRACE_LEVEL_DEBUG 5
# TRACE_LEVEL_INFO 4
# TRACE_LEVEL_WARNING 3
# TRACE_LEVEL_ERROR 2
# TRACE_LEVEL_FATAL 1
# TRACE_LEVEL_NO_TRACE 0
TRACE_LEVEL ?= 3

136
firmware/apps/blupdate/main.c Normal file
View File

@@ -0,0 +1,136 @@
/* SIMtrace 2 firmware USB DFU bootloader
*
* (C) 2015-2017 by Harald Welte <hwelte@hmw-consulting.de>
* (C) 2018-2019 by sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon@sysmocom.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "board.h"
#include "core_cm3.h"
#include "flashd.h"
#include "utils.h"
#include "usb/device/dfu/dfu.h"
#include "usb/common/dfu/usb_dfu.h"
#include "manifest.h"
#include "USBD_HAL.h"
#include <osmocom/core/timer.h>
/* actual section content must be replaced with the padded bootloader by running objcopy! */
const uint32_t bl_update_data[BOARD_DFU_BOOT_SIZE / sizeof(uint32_t)] __attribute__((section(".fwupdate"))) = { 0xFF };
unsigned int g_unique_id[4];
/* remember if the watchdog has been configured in the main loop so we can kick it in the ISR */
static bool watchdog_configured = false;
extern uint32_t _end;
extern uint32_t _srelocate;
extern uint32_t _etext;
void DFURT_SwitchToDFU(void)
{
}
void USBDFU_Runtime_RequestHandler(const USBGenericRequest *request)
{
}
int USBDFU_handle_dnload(uint8_t altif, unsigned int offset, uint8_t *data, unsigned int len)
{
return 0;
}
int USBDFU_handle_upload(uint8_t altif, unsigned int offset, uint8_t *data, unsigned int req_len)
{
return 0;
}
int USBDFU_OverrideEnterDFU(void)
{
return 0;
}
__attribute__((section(".ramfunc"), noinline)) static uint32_t flash_wait_ready()
{
Efc *efc = EFC;
uint32_t dwStatus;
do {
dwStatus = efc->EEFC_FSR;
} while ((dwStatus & EEFC_FSR_FRDY) != EEFC_FSR_FRDY);
return (dwStatus & (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE));
}
__attribute__((section(".ramfunc"), noinline)) static void flash_cmd(uint32_t dwCommand, uint32_t dwArgument)
{
Efc *efc = EFC;
uint32_t dwStatus;
efc->EEFC_FCR = EEFC_FCR_FKEY(0x5A) | EEFC_FCR_FARG(dwArgument) | EEFC_FCR_FCMD(dwCommand);
}
__attribute__((section(".ramfunc"), noinline, noreturn)) static void erase_first_app_sector()
{
/* page 64 */
uint32_t first_app_page = (BOARD_DFU_BOOT_SIZE / IFLASH_PAGE_SIZE);
uint32_t *first_app_address = (uint32_t *)(IFLASH_ADDR + first_app_page * IFLASH_PAGE_SIZE + 0);
#if 1
/* overwrite first app sector so we don't keep booting this */
for (int i = 0; i < IFLASH_PAGE_SIZE / 4; i++)
first_app_address[i] = 0xffffffff;
flash_cmd(EFC_FCMD_EWP, first_app_page);
#else
/* why does erasing the whole flash with a protected bootloader not work at all? */
flash_cmd(EFC_FCMD_EA, 0);
#endif
flash_wait_ready();
for (;;) {
/* no functon call, since NVIC_SystemReset() might not be inlined! */
SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
SCB_AIRCR_SYSRESETREQ_Msk);
__DSB();
while (1)
;
}
}
#define MAX_USB_ITER BOARD_MCK / 72 // This should be around a second
extern int main(void)
{
uint8_t isUsbConnected = 0;
unsigned int i = 0;
uint32_t reset_cause = (RSTC->RSTC_SR & RSTC_SR_RSTTYP_Msk) >> RSTC_SR_RSTTYP_Pos;
/* Enable watchdog for 2000ms, with no window */
WDT_Enable(WDT, WDT_MR_WDRSTEN | WDT_MR_WDDBGHLT | WDT_MR_WDIDLEHLT | (WDT_GetPeriod(2000) << 16) |
WDT_GetPeriod(2000));
watchdog_configured = true;
EEFC_ReadUniqueID(g_unique_id);
printf("\n\r\n\r");
printf("bootloader updater %s for board %s\n\r"
"(C) 2010-2017 by Harald Welte, 2018-2019 by Kevin Redon\n\r",
manifest_revision, manifest_board);
/* clear g_dfu on power-up reset */
memset(g_dfu, 0, sizeof(*g_dfu));
TRACE_INFO("USB init...\n\r");
/* Signal USB reset by disabling the pull-up on USB D+ for at least 10 ms */
USBD_Disconnect();
/* Initialize the flash to be able to write it, using the IAP ROM code */
FLASHD_Initialize(BOARD_MCK, 1);
__disable_irq();
FLASHD_Unlock(IFLASH_ADDR, IFLASH_ADDR + IFLASH_SIZE - 1, 0, 0);
FLASHD_Write(IFLASH_ADDR, bl_update_data, BOARD_DFU_BOOT_SIZE);
erase_first_app_sector();
}

6
firmware/apps/blupdate/usb_strings.txt Normal file
View File

@@ -0,0 +1,6 @@
sysmocom - s.f.m.c. GmbH
PRODUCT_STRING
bootloader updater
RAM
Flash (Application Partition)
Flash (Bootloader Partition)

17
firmware/apps/cardem/main.c
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*------------------------------------------------------------------------------
* Headers
@@ -71,8 +67,13 @@ static const conf_func config_func_ptrs[] = {
.init = mode_cardemu_init,
.exit = mode_cardemu_exit,
.run = mode_cardemu_run,
#if defined (ngff_cardem)
.usart0_irq = mode_cardemu_usart1_irq,
.usart1_irq = mode_cardemu_usart0_irq,
#else
.usart0_irq = mode_cardemu_usart0_irq,
.usart1_irq = mode_cardemu_usart1_irq,
#endif
},
#endif
#ifdef HAVE_MITM
@@ -154,7 +155,7 @@ extern int main(void)
WDT_Enable(WDT, WDT_MR_WDRSTEN | WDT_MR_WDDBGHLT | WDT_MR_WDIDLEHLT |
(WDT_GetPeriod(2000) << 16) | WDT_GetPeriod(2000));
PIO_InitializeInterrupts(0);
PIO_InitializeInterrupts(10);
print_banner();
board_main_top();
@@ -193,8 +194,8 @@ extern int main(void)
WDT_Restart(WDT);
#if TRACE_LEVEL >= TRACE_LEVEL_DEBUG
const char rotor[] = { '-', '\\', '|', '/' };
putchar('\b');
putchar(rotor[i++ % ARRAY_SIZE(rotor)]);
putchar('\b');
#endif
check_exec_dbg_cmd();
osmo_timers_prepare();
@@ -205,6 +206,10 @@ extern int main(void)
if (isUsbConnected) {
isUsbConnected = 0;
}
/* HACK: we don't really deal with USB disconnect yet,
* so let's just reset the entire uC if this happens */
TRACE_INFO("Resetting uC on USB disconnect\n\r");
NVIC_SystemReset();
} else if (isUsbConnected == 0) {
TRACE_INFO("USB is now configured\n\r");

17
firmware/apps/dfu/main.c
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include "board.h"
#include "utils.h"
@@ -271,7 +267,7 @@ extern int main(void)
#ifdef PINS_LEDS
/* Configure LED */
PIO_Configure(pinsLeds, sizeof(pinsLeds));
PIO_Configure(pinsLeds, PIO_LISTSIZE(pinsLeds));
PIO_Set(&pinsLeds[LED_NUM_RED]);
PIO_Clear(&pinsLeds[LED_NUM_GREEN]);
#endif
@@ -342,16 +338,7 @@ extern int main(void)
TRACE_INFO("USB init...\n\r");
/* Signal USB reset by disabling the pull-up on USB D+ for at least 10 ms */
USBD_Disconnect();
#ifdef PIN_USB_PULLUP
const Pin usb_dp_pullup = PIN_USB_PULLUP;
PIO_Configure(&usb_dp_pullup, 1);
PIO_Set(&usb_dp_pullup);
#endif
mdelay(50);
#ifdef PIN_USB_PULLUP
PIO_Clear(&usb_dp_pullup);
#endif
mdelay(500);
USBDFU_Initialize(&dfu_descriptors);
while (USBD_GetState() < USBD_STATE_CONFIGURED) {

4
firmware/apps/trace/main.c
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
/*------------------------------------------------------------------------------
* Headers

4
firmware/apps/triple_play/main.c
View File

@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*------------------------------------------------------------------------------
* Headers

2
firmware/atmel_softpack_libraries/libchip_sam3s/chip.h
View File

@@ -15,7 +15,7 @@
/* Define attribute */
#if defined ( __CC_ARM ) /* Keil µVision 4 */
#if defined ( __CC_ARM ) /* Keil µVision 4 */
#define WEAK __attribute__ ((weak))
#elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */
#define WEAK __weak

3
firmware/atmel_softpack_libraries/libchip_sam3s/source/exceptions.c
View File

@@ -151,8 +151,7 @@ WEAK void HardFault_Handler( void )
" mrseq r0, msp \n"
" mrsne r0, psp \n"
//" ldr r1, [r0, #24] \n"
" b hard_fault_handler_c\n"
".syntax divided \n");
" b hard_fault_handler_c\n");
}
/**

4
firmware/atmel_softpack_libraries/usb/device/dfu/dfu_driver.c
View File

@@ -14,10 +14,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <unistd.h>

4
firmware/atmel_softpack_libraries/usb/device/dfu/dfu_runtime.c
View File

@@ -15,10 +15,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <board.h>

2
firmware/atmel_softpack_libraries/usb/include/USBD.h
View File

@@ -63,7 +63,7 @@
*------------------------------------------------------------------------------*/
/* Define attribute */
#if defined ( __CC_ARM ) /* Keil µVision 4 */
#if defined ( __CC_ARM ) /* Keil µVision 4 */
#define WEAK __attribute__ ((weak))
#elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */
#define WEAK __weak

2
firmware/atmel_softpack_libraries/usb/include/USBDescriptors.h
View File

@@ -296,7 +296,7 @@ typedef uint32_t (*USBDescriptorParseFunction)(void *descriptor, void *parseArg)
*/
#pragma pack(1)
#if defined ( __CC_ARM ) /* Keil µVision 4 */
#if defined ( __CC_ARM ) /* Keil µVision 4 */
#elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */
#define __attribute__(...)
#elif defined ( __GNUC__ ) /* GCC CS3 2009q3-68 */

4
firmware/libboard/common/include/board_common.h
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#ifndef _BOARD_
#define _BOARD_

4
firmware/libboard/common/include/boardver_adc.h
View File

@@ -7,10 +7,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once

7
firmware/libboard/common/include/led.h
View File

@@ -7,10 +7,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once
@@ -31,7 +27,8 @@ enum led_pattern {
BLINK_200O_F = 7,
BLINK_600O_F = 8,
BLINK_CUSTOM = 9,
BLINK_2F_O,
BLINK_2F_O = 10,
BLINK_5O_5F = 11,
_NUM_LED_BLINK
};

4
firmware/libboard/common/include/manifest.h
View File

@@ -7,10 +7,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#ifndef _MANIFEST_H
#define _MANIFEST_H

4
firmware/libboard/common/include/sim_switch.h
View File

@@ -7,10 +7,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once

32
firmware/libboard/common/resources/sam3s4/dfu.ld
View File

@@ -39,7 +39,8 @@ SEARCH_DIR(.)
MEMORY
{
/* reserve the first 16k (= 0x4000) for the DFU bootloader */
rom (rx) : ORIGIN = 0x00400000 + 16K, LENGTH = 256K - 16K /* flash, 256K */
crcstub (rx) : ORIGIN = 0x00400000 + 16K, LENGTH = 512 /* crcstub part */
rom (rx) : ORIGIN = 0x00400000 + 16K + 512, LENGTH = 256K - 16K - 512 /* flash, 256K */
/* note: dfudata will be at the start */
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K /* SRAM, 48K */
}
@@ -47,9 +48,17 @@ MEMORY
/* Section Definitions */
SECTIONS
{
.text :
{
.crcstub :
{
. = ALIGN(4);
KEEP(*(.crcstub_table))
KEEP(*(.crcstub_code))
} > crcstub = 0xff
.text :
{
. = ALIGN(512);
_sfixed = .;
KEEP(*(.vectors .vectors.*))
*(.text .text.* .gnu.linkonce.t.*)
@@ -94,15 +103,20 @@ SECTIONS
. = ALIGN(4);
_efixed = .; /* End of text section */
} > rom
} > rom = 0xff
/* .ARM.exidx is sorted, so has to go in its own output section. */
PROVIDE_HIDDEN (__exidx_start = .);
.ARM.exidx :
/DISCARD/ :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
*(.ARM.exidx)
}
.blupdate :
{
. = ALIGN(4);
_blupdate_start = .;
KEEP(*(.fwupdate .fwupdate.*));
_blupdate_end = .;
} > rom
PROVIDE_HIDDEN (__exidx_end = .);
. = ALIGN(4);
_etext = .;

11
firmware/libboard/common/resources/sam3s4/flash.ld
View File

@@ -94,13 +94,12 @@ SECTIONS
_efixed = .; /* End of text section */
} > rom
/* .ARM.exidx is sorted, so has to go in its own output section. */
PROVIDE_HIDDEN (__exidx_start = .);
.ARM.exidx :
/DISCARD/ :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
} > rom
PROVIDE_HIDDEN (__exidx_end = .);
*(.ARM.exidx)
*(.crcstub_table)
*(.crcstub_code)
}
. = ALIGN(4);
_etext = .;

6
firmware/libboard/common/source/board_lowlevel.c
View File

@@ -147,7 +147,7 @@ extern WEAK void LowLevelInit( void )
}
*/
#ifndef qmod
#ifndef BOARD_MAINOSC_BYPASS
/* Initialize main oscillator */
if ( !(PMC->CKGR_MOR & CKGR_MOR_MOSCSEL) )
{
@@ -165,11 +165,11 @@ extern WEAK void LowLevelInit( void )
timeout = 0;
while (!(PMC->PMC_SR & PMC_SR_MOSCSELS) && (timeout++ < CLOCK_TIMEOUT));
#else
/* QMOD has external 12MHz clock source */
/* Board has external clock, not a crystal oscillator */
PIOB->PIO_PDR = (1 << 9);
PIOB->PIO_PUDR = (1 << 9);
PIOB->PIO_PPDDR = (1 << 9);
PMC->CKGR_MOR = CKGR_MOR_KEY(0x37) | CKGR_MOR_MOSCRCEN | CKGR_MOR_MOSCXTBY| CKGR_MOR_MOSCSEL;
PMC->CKGR_MOR = CKGR_MOR_KEY(0x37) | CKGR_MOR_MOSCRCEN | CKGR_MOR_MOSCXTBY | CKGR_MOR_MOSCSEL;
#endif
/* disable the red LED after main clock initialization */

4
firmware/libboard/common/source/boardver_adc.c
View File

@@ -7,10 +7,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include "board.h"
#include "boardver_adc.h"

12
firmware/libboard/common/source/led.c
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include <stdint.h>
#include <string.h>
@@ -58,6 +54,10 @@ static const struct blink_state bs_on[] = {
{ 0, 1 }
};
static const struct blink_state bs_5on_5off[] = {
{ 500, 1 }, { 500, 0 }
};
static const struct blink_state bs_3on_5off[] = {
{ 300, 1 }, { 500, 0 }
};
@@ -107,6 +107,10 @@ static const struct blink_pattern patterns[] = {
.states = bs_on,
.size = ARRAY_SIZE(bs_on),
},
[BLINK_5O_5F] = {
.states = bs_5on_5off,
.size = ARRAY_SIZE(bs_5on_5off),
},
[BLINK_3O_5F] = {
.states = bs_3on_5off,
.size = ARRAY_SIZE(bs_3on_5off),

4
firmware/libboard/common/source/manifest.c
View File

@@ -7,10 +7,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include "manifest.h"

1
firmware/libboard/common/source/uart_console.c
View File

@@ -100,6 +100,7 @@ extern void UART_Configure( uint32_t baudrate, uint32_t masterClock)
/* Enable TX interrupts */
pUart->UART_IER = UART_IER_TXRDY;
NVIC_SetPriority(CONSOLE_IRQ, 15); /* lowest priority */
NVIC_EnableIRQ(CONSOLE_IRQ);
/* Enable receiver and transmitter */

162
firmware/libboard/ngff_cardem/include/board.h Normal file
View File

@@ -0,0 +1,162 @@
/* Osmocom ngff-cardem board definition
*
* (C) 2021 by Harald Welte <laforge@osmocom.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#pragma once
#include "board_common.h"
#include "simtrace_usb.h"
/** Name of the board */
#define BOARD_NAME "NGFF-CARDEM"
/** Board definition */
#define ngff_cardem
/** oscillator used as main clock source (in Hz) */
#define BOARD_MAINOSC 12000000
/** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */
#define BOARD_MCK 58000000 // 12.000 * 29 / 6
/** MCU pin connected to red LED */
#define PIO_LED_RED PIO_PA17
/** MCU pin connected to green LED */
#define PIO_LED_GREEN PIO_PA18
/** red LED pin definition */
#define PIN_LED_RED {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
/** green LED pin definition */
#define PIN_LED_GREEN {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
/** LEDs pin definition */
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
/** index for red LED in LEDs pin definition array */
#define LED_NUM_RED 0
/** index for green LED in LEDs pin definition array */
#define LED_NUM_GREEN 1
/** the green LED is actually red and used as indication for USIM1 */
#define LED_USIM1 LED_GREEN
/* USIM 2 interface (USART) */
#define PIN_USIM2_CLK {PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
#define PIN_USIM2_IO {PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PINS_ISO7816_USIM2 PIN_USIM2_CLK, PIN_USIM2_IO
/* USIM 2 interface (TC) */
#define PIN_USIM2_IO_TC {PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
#define PIN_USIM2_CLK_TC {PIO_PA4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
#define PINS_TC_USIM2 PIN_USIM2_IO_TC, PIN_USIM2_CLK_TC
/* USIM 1 interface (USART) */
#define PIN_USIM1_IO {PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PIN_USIM1_CLK {PIO_PA23, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
#define PINS_ISO7816_USIM1 PIN_USIM1_CLK, PIN_USIM1_IO
/* USIM 1 interface (TC) */
#define PIN_USIM1_IO_TC {PIO_PA27, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
#define PIN_USIM1_CLK_TC {PIO_PA29, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
#define PINS_TC_USIM1 PIN_USIM1_IO_TC, PIN_USIM1_CLK_TC
#define PIN_USIM1_nRST {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
#define PIN_USIM1_VCC {PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
#define PIN_USIM2_nRST {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
//#define PIN_USIM2_VCC {PIO_PB2, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
#define PINS_USIM1 PINS_TC_USIM1, PINS_ISO7816_USIM1, PIN_USIM1_nRST
#define PINS_USIM2 PINS_TC_USIM2, PINS_ISO7816_USIM2, PIN_USIM2_nRST
/* from v3 and onwards only (!) */
#define PIN_DET_USIM1_PRES {PIO_PA8, PIOA, ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_IT_EDGE}
/* inputs reading the WWAN LED level */
#define PIN_WWAN1 {PIO_PA15, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE}
#define PINS_WWAN_IN { PIN_WWAN1 }
#define PIN_MODEM_EN {PIO_PA11, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PIN_N_MODEM_PWR_ON {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/* outputs controlling RESET input of modems */
#define PIN_PERST1 {PIO_PA25, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define PINS_PERST { PIN_PERST1 }
#define PIN_VERSION_DET {PIO_PA19, PIOA, ID_PIOA, PIO_PERIPH_D, PIO_DEFAULT}
/* GPIO towards SPDT switches between real SIM and SAM3 */
//#define PIN_SIM_SWITCH1 {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
//#define PIN_SIM_SWITCH2 {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
#define BOARD_USB_VENDOR_ID USB_VENDOR_OPENMOKO
#define BOARD_USB_PRODUCT_ID USB_PRODUCT_NGFF_CARDEM
#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_NGFF_CARDEM
#define BOARD_USB_RELEASE 0x010
#define DETECT_VCC_BY_ADC
#define VCC_UV_THRESH_1V8 1500000
#define VCC_UV_THRESH_3V VCC_UV_THRESH_1V8
#ifdef APPLICATION_cardem
#define HAVE_CARDEM
#define HAVE_BOARD_CARDINSERT
struct cardem_inst;
void board_set_card_insert(struct cardem_inst *ci, bool card_insert);
#endif
#ifdef APPLICATION_trace
#define HAVE_SNIFFER
#endif
/* Card I/O data signal input/output (I/O_SIM in schematic) */
#define PIN_SIM_IO {PIO_PA6A_TXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/* Card CLK clock input (CLK_SIM in schematic) */
#define PIN_SIM_CLK {PIO_PA2B_SCK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
/* Card RST reset signal input (use as input since the phone will drive it) */
#define PIN_SIM_RST_SNIFF {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_IT_EDGE}
/* Pins used to sniff phone-card communication */
#define PINS_SIM_SNIFF PIN_SIM_IO, PIN_SIM_CLK, PIN_SIM_RST_SNIFF
/* Pin to measure card I/O timing (to start measuring the ETU on I/O activity; connected I/O_SIM in schematic) */
#define PIN_SIM_IO_INPUT {PIO_PA1B_TIOB0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
/* Pin used as clock input (to measure the ETU duration; connected to CLK_SIM in schematic) */
#define PIN_SIM_CLK_INPUT {PIO_PA4B_TCLK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
/* Pins used to measure ETU timing (using timer counter) */
#define PINS_TC PIN_SIM_IO_INPUT, PIN_SIM_CLK_INPUT
//default state: NO uart connected, modem connected to physical sim, NO sim presence override, modem powers sim slot
#define pin_conn_usim1_default {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define pin_conn_usim2_default {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define pin_conn_mdm_sim_default {PIO_PA0, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#define pin_conn_set_sim_det_default {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define pin_en_st_sim_vdd_default {PIO_PB2, PIOB, ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT}
#define pin_en_mdm_sim_vdd_default {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
//cardem state: uart2 (!) connected, NO modem connected to physical sim, sim presence override, NOTHING powers sim slot
#define pin_conn_usim1_cem {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define pin_conn_usim2_cem {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#define pin_conn_mdm_sim_cem {PIO_PA0, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define pin_en_st_sim_vdd_cem {PIO_PB2, PIOB, ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT}
#define pin_en_mdm_sim_vdd_cem {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
//trace state: uart2 (!) connected, modem connected to physical sim, st powers sim slot
#define pin_conn_usim1_trace {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define pin_conn_usim2_trace {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#define pin_conn_mdm_sim_trace {PIO_PA0, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#define pin_conn_set_sim_det_trace {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
#define pin_en_st_sim_vdd_trace {PIO_PB2, PIOB, ID_PIOB, PIO_OUTPUT_1, PIO_DEFAULT}
#define pin_en_mdm_sim_vdd_trace {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#define PIN_MODEM_EN_off {PIO_PA11, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#define PINS_SIM_DEFAULT pin_conn_usim1_default, pin_conn_usim2_default, pin_conn_mdm_sim_default, pin_conn_set_sim_det_default, PIN_N_MODEM_PWR_ON, PIN_MODEM_EN, pin_en_st_sim_vdd_default, pin_en_mdm_sim_vdd_default
#define PINS_SIM_CARDEM pin_conn_usim1_cem, pin_conn_usim2_cem, pin_conn_mdm_sim_cem, pin_en_mdm_sim_vdd_cem, pin_en_st_sim_vdd_cem// , pin_conn_set_sim_det_cem
#define PINS_BUS_SNIFF pin_conn_usim1_trace, pin_conn_usim2_trace, pin_conn_mdm_sim_trace, pin_conn_set_sim_det_trace,PIN_MODEM_EN_off
#define PINS_PWR_SNIFF PIN_N_MODEM_PWR_ON, PIN_MODEM_EN, pin_en_st_sim_vdd_trace, pin_en_mdm_sim_vdd_trace

18
firmware/libboard/ngff_cardem/include/card_pres.h Normal file
View File

@@ -0,0 +1,18 @@
/* card presence utilities
*
* (C) 2016-2017 by Harald Welte <hwelte@hmw-consulting.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#pragma once
int is_card_present(int port);
int card_present_init(void);

16
firmware/libboard/ngff_cardem/include/wwan_led.h Normal file
View File

@@ -0,0 +1,16 @@
/* Code to read/track the status of the WWAN LEDs of attached modems
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#pragma once
int wwan_led_active(int wwan);
int wwan_led_init(void);

17
firmware/libboard/ngff_cardem/include/wwan_perst.h Normal file
View File

@@ -0,0 +1,17 @@
/* Code to control the PERST lines of attached modems
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#pragma once
int wwan_perst_set(int modem_nr, int active);
int wwan_perst_do_reset_pulse(int modem_nr, unsigned int duration_ms);
int wwan_perst_init(void);

1
firmware/libboard/ngff_cardem/product_string.txt Normal file
View File

@@ -0,0 +1 @@
ngff-cardem

155
firmware/libboard/ngff_cardem/source/board_ngff_cardem.c Normal file
View File

@@ -0,0 +1,155 @@
/* sysmocom ngff-cardem application code
*
* (C) 2021 Harald Welte <laforge@osmocom.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "board.h"
#include "simtrace.h"
#include "utils.h"
#include "led.h"
#include "wwan_led.h"
#include "wwan_perst.h"
#include "sim_switch.h"
#include "boardver_adc.h"
#include "card_pres.h"
#include <osmocom/core/timer.h>
#include "usb_buf.h"
/* array of generated USB Strings */
extern unsigned char *usb_strings[];
/* returns '1' in case we should break any endless loop */
void board_exec_dbg_cmd(int ch)
{
switch (ch) {
case '?':
printf("\t?\thelp\n\r");
printf("\tR\treset SAM3\n\r");
printf("\tl\tswitch off LED 1\n\r");
printf("\tL\tswitch on LED 1\n\r");
printf("\tg\tswitch off LED 2\n\r");
printf("\tG\tswitch on LED 2\n\r");
printf("\t1\tGenerate 1ms reset pulse on WWAN1\n\r");
printf("\t!\tSwitch Channel A from physical -> remote\n\r");
printf("\tt\t(pseudo)talloc report\n\r");
break;
case 'R':
printf("Asking NVIC to reset us\n\r");
USBD_Disconnect();
NVIC_SystemReset();
break;
case 'l':
led_blink(LED_GREEN, BLINK_ALWAYS_OFF);
printf("LED 1 switched off\n\r");
break;
case 'L':
led_blink(LED_GREEN, BLINK_ALWAYS_ON);
printf("LED 1 switched on\n\r");
break;
case 'g':
led_blink(LED_RED, BLINK_ALWAYS_OFF);
printf("LED 2 switched off\n\r");
break;
case 'G':
led_blink(LED_RED, BLINK_ALWAYS_ON);
printf("LED 2 switched on\n\r");
break;
case '1':
printf("Resetting Modem\n\r");
wwan_perst_do_reset_pulse(0, 300);
break;
case '!':
sim_switch_use_physical(0, 0);
break;
case 't':
talloc_report(NULL, stdout);
break;
default:
printf("Unknown command '%c'\n\r", ch);
break;
}
}
void board_main_top(void)
{
#ifndef APPLICATION_dfu
usb_buf_init();
wwan_led_init();
wwan_perst_init();
sim_switch_init();
#endif
/* Obtain the circuit board version (currently just prints voltage) */
get_board_version_adc();
#ifndef APPLICATION_dfu
/* Initialize checking for card insert/remove events */
card_present_init();
#endif
wwan_perst_set(0, 0);
}
static int uart_has_loopback_jumper(void)
{
unsigned int i;
const Pin uart_loopback_pins[] = {
{PIO_PA9A_URXD0, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT},
{PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
};
/* Configure UART pins as I/O */
PIO_Configure(uart_loopback_pins, PIO_LISTSIZE(uart_loopback_pins));
/* Send pattern over UART TX and check if it is received on RX
* If the loop doesn't get interrupted, RxD always follows TxD and thus a
* loopback jumper has been placed on RxD/TxD, and we will boot
* into DFU unconditionally
*/
int has_loopback_jumper = 1;
for (i = 0; i < 10; i++) {
/* Set TxD high; abort if RxD doesn't go high either */
PIO_Set(&uart_loopback_pins[1]);
if (!PIO_Get(&uart_loopback_pins[0])) {
has_loopback_jumper = 0;
break;
}
/* Set TxD low, abort if RxD doesn't go low either */
PIO_Clear(&uart_loopback_pins[1]);
if (PIO_Get(&uart_loopback_pins[0])) {
has_loopback_jumper = 0;
break;
}
}
/* Put pins back to UART mode */
const Pin uart_pins[] = {PINS_UART};
PIO_Configure(uart_pins, PIO_LISTSIZE(uart_pins));
return has_loopback_jumper;
}
int board_override_enter_dfu(void)
{
/* If the loopback jumper is set, we enter DFU mode */
if (uart_has_loopback_jumper())
return 1;
return 0;
}
static const Pin deton = {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT};
static const Pin detoff = {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT};
void board_set_card_insert(struct cardem_inst *ci, bool card_insert)
{
PIO_Configure(card_insert ? &deton : &detoff, 1);
}

72
firmware/libboard/ngff_cardem/source/card_pres.c Normal file
View File

@@ -0,0 +1,72 @@
/* card presence utilities
*
* (C) 2016-2021 by Harald Welte <hwelte@hmw-consulting.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <osmocom/core/timer.h>
#include "board.h"
#include "utils.h"
#include "card_pres.h"
#define NUM_CARDPRES 1
#define TIMER_INTERVAL_MS 500
static const Pin pin_cardpres[NUM_CARDPRES] = { PIN_DET_USIM1_PRES };
static int last_state[NUM_CARDPRES] = { -1 };
static struct osmo_timer_list cardpres_timer;
/* Determine if a SIM card is present in the given slot */
int is_card_present(int port)
{
const Pin *pin;
int present;
if (port < 0 || port >= NUM_CARDPRES)
return -1;
pin = &pin_cardpres[port];
/* high active here */
present = PIO_Get(pin);
return present;
}
static void cardpres_tmr_cb(void *data)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(pin_cardpres); i++) {
int state = is_card_present(i);
if (state != last_state[i]) {
TRACE_INFO("%u: Card Detect Status %d -> %d\r\n", i, last_state[i], state);
/* FIXME: report to USB host */
last_state[i] = state;
}
}
osmo_timer_schedule(&cardpres_timer, 0, TIMER_INTERVAL_MS*1000);
}
int card_present_init(void)
{
unsigned int i;
PIO_Configure(pin_cardpres, ARRAY_SIZE(pin_cardpres));
/* start timer */
cardpres_timer.cb = cardpres_tmr_cb;
osmo_timer_schedule(&cardpres_timer, 0, TIMER_INTERVAL_MS*1000);
return 2;
}

77
firmware/libboard/ngff_cardem/source/sim_switch.c Normal file
View File

@@ -0,0 +1,77 @@
/* Code to switch between local (physical) and remote (emulated) SIM
*
* (C) 2015-2017 by Harald Welte <hwelte@hmw-consulting.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "board.h"
#include "trace.h"
#include "led.h"
#include "sim_switch.h"
//uart12bus 2-20e pa20
//uart22bus 1-20e pa28
//usim2bus 1-10e pa0 pivot
//sim det 2-10e pa13
static const Pin pins_default[] = {PINS_SIM_DEFAULT};
static const Pin pins_cem[] = {PINS_SIM_CARDEM};
static int initialized = 0;
int sim_switch_use_physical(unsigned int nr, int physical)
{
const Pin pin = PIN_MODEM_EN;// PIN_N_MODEM_PWR_ON;
enum led led;
if (!initialized) {
TRACE_ERROR("Somebody forgot to call sim_switch_init()\r\n");
sim_switch_init();
}
TRACE_INFO("Modem %d: %s SIM\n\r", nr,
physical ? "physical" : "virtual");
switch (nr) {
case 0:
led = LED_USIM1;
break;
default:
TRACE_ERROR("Invalid SIM%u\n\r", nr);
return -1;
}
if (physical) {
TRACE_INFO("%u: Use local/physical SIM\r\n", nr);
PIO_Configure(pins_default, PIO_LISTSIZE(pins_default));
led_blink(led, BLINK_ALWAYS_ON);
} else {
TRACE_INFO("%u: Use remote/emulated SIM\r\n", nr);
PIO_Configure(pins_cem, PIO_LISTSIZE(pins_cem));
led_blink(led, BLINK_5O_5F);
}
/* just power cycle the modem because this circumvents weird issues with unreliable signals */
PIO_Clear(&pin);
mdelay(200);
PIO_Set(&pin);
return 0;
}
int sim_switch_init(void)
{
PIO_Configure(pins_default, PIO_LISTSIZE(pins_default));
initialized = 1;
return 1;
}

89
firmware/libboard/ngff_cardem/source/wwan_led.c Normal file
View File

@@ -0,0 +1,89 @@
/* Code to read/track the status of the WWAN LEDs of attached modems
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/* Depending on the board this is running on, it might be possible
* for the controller to read the status of the WWAN LED output lines of
* the cellular modem. If the board supports this, it sets the
* PIN_WWAN1 and/or PIN_WWAN2 defines in its board.h file.
*/
#include "board.h"
#include "wwan_led.h"
#ifdef PIN_WWAN1
static const Pin pin_wwan1 = PIN_WWAN1;
static void wwan1_irqhandler(const Pin *pPin)
{
int active = wwan_led_active(0);
TRACE_INFO("0: WWAN LED %u\r\n", active);
/* TODO: notify host via USB */
}
#endif
#ifdef PIN_WWAN2
static const Pin pin_wwan2 = PIN_WWAN2;
static void wwan2_irqhandler(const Pin *pPin)
{
int active = wwan_led_active(1);
TRACE_INFO("1: WWAN LED %u\r\n", active);
/* TODO: notify host via USB */
}
#endif
/* determine if a given WWAN led is currently active or not */
int wwan_led_active(int wwan)
{
const Pin *pin;
int active;
switch (wwan) {
#ifdef PIN_WWAN1
case 0:
pin = &pin_wwan1;
break;
#endif
#ifdef PIN_WWAN2
case 1:
pin = &pin_wwan2;
break;
#endif
default:
return -1;
}
active = PIO_Get(pin) ? 0 : 1;
return active;
}
int wwan_led_init(void)
{
int num_leds = 0;
#ifdef PIN_WWAN1
PIO_Configure(&pin_wwan1, 1);
PIO_ConfigureIt(&pin_wwan1, wwan1_irqhandler);
PIO_EnableIt(&pin_wwan1);
num_leds++;
#endif
#ifdef PIN_WWAN2
PIO_Configure(&pin_wwan2, 1);
PIO_ConfigureIt(&pin_wwan2, wwan2_irqhandler);
PIO_EnableIt(&pin_wwan2);
num_leds++;
#endif
return num_leds;
}

123
firmware/libboard/ngff_cardem/source/wwan_perst.c Normal file
View File

@@ -0,0 +1,123 @@
/* Code to control the PERST lines of attached modems
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/* Depending on the board this is running on, it might be possible
* for the controller to set the status of the PERST input line of
* the cellular modem. If the board supports this, it sets the
* PIN_PERST1 and/or PIN_PERST2 defines in its board.h file.
*/
#include "board.h"
#include "trace.h"
#include "wwan_perst.h"
#include <osmocom/core/timer.h>
struct wwan_perst {
uint8_t idx;
const Pin pin;
struct osmo_timer_list timer;
};
#ifdef PIN_PERST1
static struct wwan_perst perst1 = {
.idx = 0,
.pin = PIN_PERST1,
};
#endif
#ifdef PIN_PERST2
static struct wwan_perst perst2 = {
.idx = 1,
.pin = PIN_PERST2,
};
#endif
static int initialized = 0;
static void perst_tmr_cb(void *data)
{
struct wwan_perst *perst = data;
/* release the (low-active) reset */
TRACE_INFO("%u: De-asserting modem reset\r\n", perst->idx);
PIO_Clear(&perst->pin);
}
static struct wwan_perst *get_perst_for_modem(int modem_nr)
{
if (!initialized) {
TRACE_ERROR("Somebody forgot to call wwan_perst_init()\r\n");
wwan_perst_init();
}
switch (modem_nr) {
#ifdef PIN_PERST1
case 0:
return &perst1;
#endif
#ifdef PIN_PERST2
case 1:
return &perst2;
#endif
default:
return NULL;
}
}
int wwan_perst_do_reset_pulse(int modem_nr, unsigned int duration_ms)
{
struct wwan_perst *perst = get_perst_for_modem(modem_nr);
if (!perst)
return -1;
TRACE_INFO("%u: Asserting modem reset\r\n", modem_nr);
PIO_Set(&perst->pin);
osmo_timer_schedule(&perst->timer, duration_ms/1000, (duration_ms%1000)*1000);
return 0;
}
int wwan_perst_set(int modem_nr, int active)
{
struct wwan_perst *perst = get_perst_for_modem(modem_nr);
if (!perst)
return -1;
osmo_timer_del(&perst->timer);
if (active) {
TRACE_INFO("%u: Asserting modem reset\r\n", modem_nr);
PIO_Set(&perst->pin);
} else {
TRACE_INFO("%u: De-asserting modem reset\r\n", modem_nr);
PIO_Clear(&perst->pin);
}
return 0;
}
int wwan_perst_init(void)
{
int num_perst = 0;
#ifdef PIN_PERST1
PIO_Configure(&perst1.pin, 1);
perst1.timer.cb = perst_tmr_cb;
perst1.timer.data = (void *) &perst1;
num_perst++;
#endif
#ifdef PIN_PERST2
PIO_Configure(&perst2.pin, 1);
perst2.timer.cb = perst_tmr_cb;
perst2.timer.data = (void *) &perst2;
num_perst++;
#endif
initialized = 1;
return num_perst;
}

87
firmware/libboard/octsimtest/include/board.h
View File

@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once
#include "board_common.h"
@@ -50,81 +46,28 @@
/* Button to force bootloader start (shorted to ground when pressed */
#define PIN_BOOTLOADER_SW {PIO_PA5, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP}
//FIXME SIM_PWEN_PIN collides with PA5/bootloader_sw on octsimtest
/* Enable powering the card using the second 3.3 V output of the LDO (active high) */
#define SIM_PWEN_PIN {PIO_PA12, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
/* Enable powering the SIM card */
#define PWR_PINS SIM_PWEN_PIN
// FIXME PA8 is 32khz xtal on octsimtest
/* Card presence pin */
#define SW_SIM PIO_PA11
/* Pull card presence pin high (shorted to ground in card slot when card is present) */
#define SMARTCARD_CONNECT_PIN {SW_SIM, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_DEGLITCH | PIO_IT_EDGE }
/** Smart card connection **/
//FIXME
/* Card RST reset signal input (active low; RST_SIM in schematic) */
#define PIN_SIM_RST {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/* Card I/O data signal input/output (I/O_SIM in schematic) */
#define PIN_SIM_IO {PIO_PA6A_TXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/* Card CLK clock input (CLK_SIM in schematic) */
#define PIN_SIM_CLK {PIO_PA2B_SCK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
/* Pin to measure card I/O timing (to start measuring the ETU on I/O activity; connected I/O_SIM in schematic) */
#define PIN_SIM_IO_INPUT {PIO_PA1B_TIOB0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
//FIXME PIO_PA4B_TCLK0 PA4 is LED on octsimtest
/* Pin used as clock input (to measure the ETU duration; connected to CLK_SIM in schematic) */
#define PIN_SIM_CLK_INPUT {PIO_PA14, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
/* Pins used to measure ETU timing (using timer counter) */
#define PINS_TC PIN_SIM_IO_INPUT, PIN_SIM_CLK_INPUT
/** Phone connection **/
/* Phone USIM slot 1 VCC pin (VCC_PHONE in schematic) */
#define PIN_USIM1_VCC {PIO_PA25, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
/* Phone USIM slot 1 RST pin (active low; RST_PHONE in schematic) */
#define PIN_USIM1_nRST {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_IT_RISE_EDGE | PIO_DEGLITCH }
#define PIN_USIM1_nRST {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_IT_EDGE | PIO_DEGLITCH }
/* Phone I/O data signal input/output (I/O_PHONE in schematic) */
#define PIN_PHONE_IO {PIO_PA22A_TXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/* Phone CLK clock input (CLK_PHONE in schematic) */
#define PIN_PHONE_CLK {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/* Pin used to switch level shifter in I/O line between rx (0) and tx (1) */
#define PIN_USIM1_IO_DIR {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/* Pin used for phone USIM slot 1 communication */
#define PINS_USIM1 PIN_PHONE_IO, PIN_PHONE_CLK, PIN_PHONE_CLK_INPUT, PIN_USIM1_VCC, PIN_PHONE_IO_INPUT, PIN_USIM1_nRST
#define PINS_USIM1 PIN_PHONE_IO, PIN_PHONE_CLK, PIN_PHONE_CLK_INPUT, PIN_USIM1_VCC, PIN_PHONE_IO_INPUT, PIN_USIM1_nRST, PIN_USIM1_IO_DIR
/* Phone I/O data signal input/output (unused USART RX input; connected to I/O_PHONE in schematic) */
#define PIN_PHONE_IO_INPUT {PIO_PA21A_RXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
/* Pin used as clock input (to measure the ETU duration; connected to CLK_PHONE in schematic) */
#define PIN_PHONE_CLK_INPUT {PIO_PA29B_TCLK2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
/** Default pin configuration **/
/* Disconnect VPP, CLK, and RST lines between card and phone using bus switch (high sets bus switch to high-impedance) */
#define PIN_SC_SW_DEFAULT {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
/* Disconnect I/O line between card and phone using bus switch (high sets bus switch to high-impedance) */
#define PIN_IO_SW_DEFAULT {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
/* Disconnect all lines (VPP, CLK, RST, and I/O) between card and phone */
#define PINS_BUS_DEFAULT PIN_SC_SW_DEFAULT, PIN_IO_SW_DEFAULT
/** Sniffer configuration **/
/* Connect VPP, CLK, and RST lines between card and phone using bus switch (low connects signals on bus switch) */
#define PIN_SC_SW_SNIFF {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/* Connect I/O line between card and phone using bus switch (low connects signals on bus switch) */
#define PIN_IO_SW_SNIFF {PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/* Connect all lines (VPP, CLK, RST, and I/O) between card and phone */
#define PINS_BUS_SNIFF PIN_SC_SW_SNIFF, PIN_IO_SW_SNIFF
/* Card RST reset signal input (use as input since the phone will drive it) */
#define PIN_SIM_RST_SNIFF {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEGLITCH | PIO_IT_EDGE}
/* Pins used to sniff phone-card communication */
#define PINS_SIM_SNIFF PIN_SIM_IO, PIN_SIM_CLK, PIN_SIM_RST_SNIFF
/* Disable power converter 4.5-6V to 3.3V (active high) */
#define PIN_SIM_PWEN_SNIFF {SIM_PWEN, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/* Enable power switch to forward VCC_PHONE to VCC_SIM (active high) */
#define PIN_VCC_FWD_SNIFF {VCC_FWD, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
/* Use phone VCC to power card */
#define PINS_PWR_SNIFF PIN_SIM_PWEN_SNIFF, PIN_VCC_FWD_SNIFF
/** CCID configuration */
/* Card RST reset signal input (active low; RST_SIM in schematic) */
#define PIN_ISO7816_RSTMC {PIO_PA7, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/* ISO7816-communication related pins */
#define PINS_ISO7816 PIN_SIM_IO, PIN_SIM_CLK, PIN_ISO7816_RSTMC // SIM_PWEN_PIN, PIN_SIM_IO2, PIN_SIM_CLK2
/** External SPI flash interface **/
/* SPI MISO pin definition */
@@ -140,30 +83,36 @@
/* SPI flash write protect pin (active low, pulled low) */
#define PIN_SPI_WP {PA15, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/** Pin configuration to control USB pull-up on D+
* @details the USB pull-up on D+ is enable by default on the board but can be disabled by setting PA16 high
*/
#define PIN_USB_PULLUP {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/** USB definitions */
/* OpenMoko SIMtrace 2 USB vendor ID */
#define BOARD_USB_VENDOR_ID USB_VENDOR_OPENMOKO
/* OpenMoko SIMtrace 2 USB product ID (main application/runtime mode) */
#define BOARD_USB_PRODUCT_ID USB_PRODUCT_SIMTRACE2
#define BOARD_USB_PRODUCT_ID USB_PRODUCT_OCTSIMTEST
/* OpenMoko SIMtrace 2 DFU USB product ID (DFU bootloader/DFU mode) */
#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_SIMTRACE2_DFU
#define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_OCTSIMTEST
/* USB release number (bcdDevice, shown as 0.00) */
#define BOARD_USB_RELEASE 0x000
/* Indicate SIMtrace is bus power in USB attributes */
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_BUSPOWERED_NORWAKEUP
#define DETECT_VCC_BY_ADC
/* we have a resistive voltage divider of 47 + 30 kOhms to also detect 5V supply power */
#define VCC_UV_THRESH_1V8 (1500000*47)/(47+30)
#define VCC_UV_THRESH_3V (2500000*47)/(47+30)
#define HAVE_SLOT_MUX
#define HAVE_BOARD_CARDINSERT
struct cardem_inst;
void board_set_card_insert(struct cardem_inst *ci, bool card_insert);
/** Supported modes */
/* SIMtrace board supports sniffer mode */
//#define HAVE_SNIFFER
/* SIMtrace board supports CCID mode */
//#define HAVE_CCID
/* SIMtrace board supports card emulation mode */
//#define HAVE_CARDEM
#define HAVE_CARDEM
/* SIMtrace board supports man-in-the-middle mode */
//#define HAVE_MITM
/* octsimtest board supports gpio_test mode */

4
firmware/libboard/octsimtest/include/i2c.h
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once

8
firmware/libboard/octsimtest/include/mcp23017.h
View File

@@ -9,17 +9,15 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once
#define MCP23017_ADDRESS 0x20
int mcp23017_init(uint8_t slave);
int mcp23017_init(uint8_t slave, uint8_t iodira, uint8_t iodirb);
int mcp23017_test(uint8_t slave);
int mcp23017_toggle(uint8_t slave);
int mcp23017_set_output_a(uint8_t slave, uint8_t val);
int mcp23017_set_output_b(uint8_t slave, uint8_t val);
//int mcp23017_write_byte(uint8_t slave, uint8_t addr, uint8_t byte);
//int mcp23017_read_byte(uint8_t slave, uint8_t addr);

17
firmware/libboard/octsimtest/include/mux.h Normal file
View File

@@ -0,0 +1,17 @@
#pragma once
void mux_init(void);
int mux_set_slot(uint8_t s);
int mux_get_slot(void);
void mux_set_freq(uint8_t s);
/* this reflects the wiring between U5 and U4 */
#define MUX_FREQ_DIV_2 0
#define MUX_FREQ_DIV_4 1
#define MUX_FREQ_DIV_16 2
#define MUX_FREQ_DIV_32 3
#define MUX_FREQ_DIV_32 3
#define MUX_FREQ_DIV_128 4
#define MUX_FREQ_DIV_512 5
#define MUX_FREQ_DIV_2048 6
#define MUX_FREQ_DIV_4096 7

57
firmware/libboard/octsimtest/source/board_octsimtest.c
View File

@@ -12,11 +12,8 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include <stdbool.h>
#include "board.h"
#include "simtrace.h"
#include "utils.h"
@@ -25,16 +22,29 @@
#include "usb_buf.h"
#include "i2c.h"
#include "mcp23017.h"
#include "mux.h"
static bool mcp2317_present = false;
void board_exec_dbg_cmd(int ch)
{
switch (ch) {
case '?':
printf("\t?\thelp\n\r");
printf("\t0-8\tselect physical SIM slot\n\r");
printf("\tR\treset SAM3\n\r");
printf("\tm\trun mcp23017 test\n\r");
printf("\tR\ttoggle MSB of gpio on mcp23017\n\r");
printf("\ti\tset card insert via I2C\n\r");
printf("\tI\tdisable card insert\n\r");
break;
case '0': mux_set_slot(0); break;
case '1': mux_set_slot(1); break;
case '2': mux_set_slot(2); break;
case '3': mux_set_slot(3); break;
case '4': mux_set_slot(4); break;
case '5': mux_set_slot(5); break;
case '6': mux_set_slot(6); break;
case '7': mux_set_slot(7); break;
case 'R':
printf("Asking NVIC to reset us\n\r");
USBD_Disconnect();
@@ -43,8 +53,13 @@ void board_exec_dbg_cmd(int ch)
case 'm':
mcp23017_test(MCP23017_ADDRESS);
break;
case 't':
mcp23017_toggle(MCP23017_ADDRESS);
case 'i':
printf("Setting card insert (slot=%u)\r\n", mux_get_slot());
mcp23017_set_output_a(MCP23017_ADDRESS, (1 << mux_get_slot()));
break;
case 'I':
printf("Releasing card insert (slot=%u)\r\n", mux_get_slot());
mcp23017_set_output_a(MCP23017_ADDRESS, 0);
break;
default:
printf("Unknown command '%c'\n\r", ch);
@@ -57,9 +72,13 @@ void board_main_top(void)
#ifndef APPLICATION_dfu
usb_buf_init();
mux_init();
i2c_pin_init();
if (!mcp23017_init(MCP23017_ADDRESS))
printf("mcp23017 not found!\n\r");
/* PORT A: all outputs, Port B0 output, B1..B7 unused */
if (mcp23017_init(MCP23017_ADDRESS, 0x00, 0xfe) == 0) {
mcp2317_present = true;
mcp23017_set_output_a(MCP23017_ADDRESS, 0);
}
/* Initialize checking for card insert/remove events */
//card_present_init();
#endif
@@ -79,3 +98,23 @@ int board_override_enter_dfu(void)
} else
return 0;
}
void board_set_card_insert(struct cardem_inst *ci, bool card_insert)
{
int s = mux_get_slot();
/* A0 .. A7 of the MCP are each connected to the gate of a FET which closes
* the sim-present signal of the respective slot */
if (mcp2317_present) {
if (card_insert) {
/* we must enable card-presence of the active slot and disable it on all others */
mcp23017_set_output_a(MCP23017_ADDRESS, (1 << s));
} else {
/* we disable all card insert signals */
mcp23017_set_output_a(MCP23017_ADDRESS, 0);
}
} else {
TRACE_WARNING("No MCP23017 present; cannot set CARD_INSERT\r\n");
}
}

4
firmware/libboard/octsimtest/source/i2c.c
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include "board.h"
#include <stdbool.h>

34
firmware/libboard/octsimtest/source/mcp23017.c
View File

@@ -92,19 +92,25 @@ out_stop:
return 0;
}
int mcp23017_init(uint8_t slave)
int mcp23017_init(uint8_t slave, uint8_t iodira, uint8_t iodirb)
{
printf("mcp23017_init\n\r");
TRACE_DEBUG("mcp23017_init\n\r");
// all gpio input
if (mcp23017_write_byte(slave, MCP23017_IODIRA, 0xff))
return false;
if (mcp23017_write_byte(slave, MCP23017_IODIRA, iodira))
goto out_err;
// msb of portb output, rest input
if (mcp23017_write_byte(slave, MCP23017_IODIRB, 0x7f))
return false;
if (mcp23017_write_byte(slave, MCP23017_IODIRB, iodirb))
goto out_err;
if (mcp23017_write_byte(slave, MCP23017_IOCONA, 0x20)) //disable SEQOP (autoinc addressing)
return false;
printf("mcp23017 found\n\r");
return true;
goto out_err;
TRACE_DEBUG("mcp23017 found\n\r");
return 0;
out_err:
TRACE_WARNING("mcp23017 NOT found!\n\r");
return -1;
}
int mcp23017_test(uint8_t slave)
@@ -120,6 +126,16 @@ int mcp23017_test(uint8_t slave)
return 0;
}
int mcp23017_set_output_a(uint8_t slave, uint8_t val)
{
return mcp23017_write_byte(slave, MCP23017_OLATA, val);
}
int mcp23017_set_output_b(uint8_t slave, uint8_t val)
{
return mcp23017_write_byte(slave, MCP23017_OLATB, val);
}
int mcp23017_toggle(uint8_t slave)
{
// example writing MSB of gpio

109
firmware/libboard/octsimtest/source/mux.c Normal file
View File

@@ -0,0 +1,109 @@
/* sysmoOCTSIMTEST support for multiplexers
*
* (C) 2021 by Harald Welte <laforge@gnumonks.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "board.h"
#include "mux.h"
#include <stdbool.h>
#include <errno.h>
/* 3-bit S0..S2 signal for slot selection */
static const Pin pin_in_sel[3] = {
{ PIO_PA1, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
{ PIO_PA2, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
{ PIO_PA3, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
};
/* 3-bit S0..S2 signal for frequency divider selection */
static const Pin pin_freq_sel[3] = {
{ PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
{ PIO_PA17, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
{ PIO_PA18, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT },
};
/* low-active output enable for all muxes */
static const Pin pin_oe = { PIO_PA19, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT };
static uint8_t g_mux_slot = 0;
/* initialize the external 1:8 multiplexers */
void mux_init(void)
{
PIO_Configure(&pin_oe, PIO_LISTSIZE(pin_oe));
PIO_Configure(pin_in_sel, PIO_LISTSIZE(pin_in_sel));
PIO_Configure(pin_freq_sel, PIO_LISTSIZE(pin_freq_sel));
mux_set_slot(0);
}
/* set the slot selection mux */
int mux_set_slot(uint8_t s)
{
TRACE_INFO("%s(%u)\r\n", __func__, s);
if (s > 7)
return -EINVAL;
/* !OE = H: disconnect input and output of muxes */
PIO_Set(&pin_oe);
if (s & 1)
PIO_Set(&pin_in_sel[0]);
else
PIO_Clear(&pin_in_sel[0]);
if (s & 2)
PIO_Set(&pin_in_sel[1]);
else
PIO_Clear(&pin_in_sel[1]);
if (s & 4)
PIO_Set(&pin_in_sel[2]);
else
PIO_Clear(&pin_in_sel[2]);
/* !OE = L: (re-)enable the output of muxes */
PIO_Clear(&pin_oe);
g_mux_slot = s;
return s;
}
int mux_get_slot(void)
{
return g_mux_slot;
}
/* set the frequency divider mux */
void mux_set_freq(uint8_t s)
{
TRACE_INFO("%s(%u)\r\n", __func__, s);
/* no need for 'break before make' here, this would also affect
* the SIM card I/O signals which we don't want to disturb */
if (s & 1)
PIO_Set(&pin_freq_sel[0]);
else
PIO_Clear(&pin_freq_sel[0]);
if (s & 2)
PIO_Set(&pin_freq_sel[1]);
else
PIO_Clear(&pin_freq_sel[1]);
if (s & 4)
PIO_Set(&pin_freq_sel[2]);
else
PIO_Clear(&pin_freq_sel[2]);
/* !OE = L: ensure enable the output of muxes */
PIO_Clear(&pin_oe);
}

33
firmware/libboard/octsimtest/source/sim_switch.c Normal file
View File

@@ -0,0 +1,33 @@
/* Code to switch between local (physical) and remote (emulated) SIM
*
* (C) 2021 by Harald Welte <hwelte@hmw-consulting.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "board.h"
#include "trace.h"
#include "sim_switch.h"
int sim_switch_use_physical(unsigned int nr, int physical)
{
if (physical) {
TRACE_ERROR("%u: Use local/physical SIM - UNSUPPORTED!\r\n", nr);
} else {
TRACE_INFO("%u: Use remote/emulated SIM\r\n", nr);
}
return 0;
}
int sim_switch_init(void)
{
return 1; // SIMtrace hardware has only one switchable interface
}

4
firmware/libboard/owhw/include/board.h
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once
#include "board_common.h"

4
firmware/libboard/owhw/source/owhw.c
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include "chip.h"

4
firmware/libboard/owhw/source/sim_switch.c
View File

@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include "board.h"
#include "trace.h"

11
firmware/libboard/qmod/include/board.h
View File

@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once
#include "board_common.h"
@@ -29,6 +25,8 @@
#define BOARD_MAINOSC 12000000
/** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */
#define BOARD_MCK 58000000 // 18.432 * 29 / 6
/** board has external clock, not crystal */
#define BOARD_MAINOSC_BYPASS
/** MCU pin connected to red LED */
#define PIO_LED_RED PIO_PA17
@@ -39,7 +37,7 @@
/** green LED pin definition */
#define PIN_LED_GREEN {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
/** LEDs pin definition */
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
/** index for red LED in LEDs pin definition array */
#define LED_NUM_RED 0
/** index for green LED in LEDs pin definition array */
@@ -109,6 +107,9 @@
#define BOARD_USB_RELEASE 0x010
#define CARDEMU_SECOND_UART
#define DETECT_VCC_BY_ADC
#define VCC_UV_THRESH_1V8 1500000
#define VCC_UV_THRESH_3V 2500000
#define HAVE_CARDEM

4
firmware/libboard/qmod/include/card_pres.h
View File

@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once

4
firmware/libboard/qmod/include/i2c.h
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once

4
firmware/libboard/qmod/include/wwan_led.h
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once

4
firmware/libboard/qmod/include/wwan_perst.h
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once

4
firmware/libboard/qmod/source/board_qmod.c
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include "board.h"
#include "simtrace.h"

4
firmware/libboard/qmod/source/card_pres.c
View File

@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include <osmocom/core/timer.h>
#include "board.h"

4
firmware/libboard/qmod/source/i2c.c
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include "board.h"
#include <stdbool.h>

4
firmware/libboard/qmod/source/sim_switch.c
View File

@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include "board.h"
#include "trace.h"

4
firmware/libboard/qmod/source/wwan_led.c
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
/* Depending on the board this is running on, it might be possible
* for the controller to read the status of the WWAN LED output lines of

4
firmware/libboard/qmod/source/wwan_perst.c
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
/* Depending on the board this is running on, it might be possible
* for the controller to set the status of the PERST input line of

9
firmware/libboard/sam3p256/include/board.h
View File

@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once
#include "board_common.h"
@@ -135,11 +131,6 @@
#define PIN_SPI_WP {PA15, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
#endif
/** Pin configuration to control USB pull-up on D+
* @details the USB pull-up on D+ is enable by default on the board but can be disabled by setting PA16 high
*/
#define PIN_USB_PULLUP {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/** USB definitions */
/* OpenMoko SIMtrace 2 USB vendor ID */
#define BOARD_USB_VENDOR_ID USB_VENDOR_OPENMOKO

4
firmware/libboard/sam3p256/source/board_sam3p256.c
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include "board.h"
#include "simtrace.h"

11
firmware/libboard/simtrace/include/board.h
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once
#include "board_common.h"
@@ -40,7 +36,7 @@
/** green LED pin definition */
#define PIN_LED_GREEN {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
/** LEDs pin definition */
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
#define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN
/** index for red LED in LEDs pin definition array */
#define LED_NUM_RED 0
/** index for green LED in LEDs pin definition array */
@@ -134,11 +130,6 @@
/* SPI flash write protect pin (active low, pulled low) */
#define PIN_SPI_WP {PA15, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/** Pin configuration to control USB pull-up on D+
* @details the USB pull-up on D+ is enable by default on the board but can be disabled by setting PA16 high
*/
#define PIN_USB_PULLUP {PIO_PA16, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
/** USB definitions */
/* OpenMoko SIMtrace 2 USB vendor ID */
#define BOARD_USB_VENDOR_ID USB_VENDOR_OPENMOKO

4
firmware/libboard/simtrace/source/board_simtrace.c
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include "board.h"
#include "simtrace.h"

4
firmware/libboard/simtrace/source/sim_switch.c
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include "board.h"
#include "trace.h"

2
firmware/libcommon/include/assert.h
View File

@@ -89,7 +89,7 @@
/// \param condition Condition to verify.
#define ASSERT(condition) { \
if (!(condition)) { \
printf("-F- ASSERT: %s %s:%d\n\r", #condition, __BASE_FILE__, __LINE__); \
printf_sync("-F- ASSERT: %s %s:%d\n\r", #condition, __BASE_FILE__, __LINE__); \
while (1); \
} \
}

6
firmware/libcommon/include/card_emu.h
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once
@@ -73,6 +69,8 @@ void card_emu_uart_enable(uint8_t uart_chan, uint8_t rxtx);
void card_emu_uart_wait_tx_idle(uint8_t uart_chan);
void card_emu_uart_interrupt(uint8_t uart_chan);
int card_emu_get_vcc(uint8_t uart_chan);
struct cardemu_usb_msg_config;
int card_emu_set_config(struct card_handle *ch, const struct cardemu_usb_msg_config *scfg,
unsigned int scfg_len);

28
firmware/libcommon/include/cciddriver.h
View File

@@ -175,11 +175,11 @@ typedef struct
{
/// Number of seconds. If 00h then CCID default value is used.
unsigned char bTimeOut;
/// Several parameters for the PIN format options (defined in § 6.1.11.4)
/// Several parameters for the PIN format options (defined in § 6.1.11.4)
unsigned char bmFormatString4;
/// Define the length of the PIN to present in the APDU command
unsigned char bmPINBlockString;
/// Allows the length PIN insertion in the APDU command (defined in § 6.1.11.6)
/// Allows the length PIN insertion in the APDU command (defined in § 6.1.11.6)
unsigned char bmPinLengthFormat;
/// Insertion position offset in byte for the current PIN
unsigned char bInsertionOffsetOld;
@@ -218,13 +218,13 @@ typedef struct
/// Protocol Data Structure for Protocol T=0 (bProtocolNum=0, dwLength=00000005h)
typedef struct
{
/// B7-4 – FI – Index into the table 7 in ISO/IEC 7816-3:1997 selecting a
/// B7-4 - FI - Index into the table 7 in ISO/IEC 7816-3:1997 selecting a
/// clock rate conversion factor
/// B3-0 – DI - Index into the table 8 in ISO/IEC 7816-3:1997 selecting a
/// B3-0 - DI - Index into the table 8 in ISO/IEC 7816-3:1997 selecting a
/// baud rate conversion factor
unsigned char bmFindexDindex;
/// For T=0 ,B0 – 0b, B7-2 – 000000b
/// B1 – Convention used (b1=0 for direct, b1=1 for inverse)
/// For T=0 ,B0 - 0b, B7-2 - 000000b
/// B1 - Convention used (b1=0 for direct, b1=1 for inverse)
unsigned char bmTCCKST0; // 0 to 2
/// Extra Guardtime between two characters. Add 0 to 254 etu to the normal
/// guardtime of 12etu. FFh is the same as 00h.
@@ -243,14 +243,14 @@ typedef struct
/// Protocol Data Structure for Protocol T=1 (bProtocolNum=1, dwLength=00000007h)
typedef struct
{
/// B7-4 – FI – Index into the table 7 in ISO/IEC 7816-3:1997 selecting a
/// B7-4 - FI - Index into the table 7 in ISO/IEC 7816-3:1997 selecting a
/// clock rate conversion factor
/// B3-0 – DI - Index into the table 8 in ISO/IEC 7816-3:1997 selecting a
/// B3-0 - DI - Index into the table 8 in ISO/IEC 7816-3:1997 selecting a
/// baud rate conversion factor
unsigned char bmFindexDindex;
/// For T=1, B7-2 – 000100b
/// B0 – Checksum type (b0=0 for LRC, b0=1 for CRC
/// B1 – Convention used (b1=0 for direct, b1=1 for inverse)
/// For T=1, B7-2 - 000100b
/// B0 - Checksum type (b0=0 for LRC, b0=1 for CRC
/// B1 - Convention used (b1=0 for direct, b1=1 for inverse)
unsigned char bmTCCKST1; // 10h, 11h, 12h, 13h
/// Extra Guardtime (0 to 254 etu between two characters).
/// If value is FFh, then guardtime is reduced by 1.
@@ -292,8 +292,8 @@ typedef struct
/// - 04h 1.8V
/// Other bits are RFU.
unsigned char bVoltageSupport;
/// RRRR –Upper Word- is RFU = 0000h
/// PPPP –Lower Word- Encodes the supported protocol types. A ‘1’ in a given
/// RRRR -Upper Word- is RFU = 0000h
/// PPPP -Lower Word- Encodes the supported protocol types. A "1" in a given
/// bit position indicates support for the associated ISO protocol.
/// 0001h = Protocol T=0
/// 0002h = Protocol T=1
@@ -318,7 +318,7 @@ typedef struct
/// Indicates the maximum IFSD supported by CCID for protocol T=1.
unsigned long dwMaxIFSD;
/// - RRRR-Upper Word- is RFU = 0000h
/// - PPPP-Lower Word- encodes the supported protocol types. A ‘1’ in a given
/// - PPPP-Lower Word- encodes the supported protocol types. A "1" in a given
/// bit position indicates support for the associated protocol.
/// 0001h indicates support for the 2-wire protocol 1
/// 0002h indicates support for the 3-wire protocol 1

4
firmware/libcommon/include/iso7816_fidi.h
View File

@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once

4
firmware/libcommon/include/llist_irqsafe.h
View File

@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once

22
firmware/libcommon/include/ringbuffer.h
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#ifndef SIMTRACE_RINGBUF_H
#define SIMTRACE_RINGBUF_H
@@ -36,4 +32,22 @@ int rbuf_write(volatile ringbuf * rb, uint8_t item);
bool rbuf_is_empty(volatile ringbuf * rb);
bool rbuf_is_full(volatile ringbuf * rb);
/* same as above but with 16bit values instead of 8bit */
#define RING16_BUFLEN 512
typedef struct ringbuf16 {
uint16_t buf[RING16_BUFLEN];
size_t ird;
size_t iwr;
} ringbuf16;
void rbuf16_reset(volatile ringbuf16 * rb);
uint16_t rbuf16_read(volatile ringbuf16 * rb);
uint16_t rbuf16_peek(volatile ringbuf16 * rb);
int rbuf16_write(volatile ringbuf16 * rb, uint16_t item);
bool rbuf16_is_empty(volatile ringbuf16 * rb);
bool rbuf16_is_full(volatile ringbuf16 * rb);
#endif /* end of include guard: SIMTRACE_RINGBUF_H */

8
firmware/libcommon/include/simtrace.h
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#ifndef SIMTRACE_H
#define SIMTRACE_H
@@ -128,4 +124,8 @@ extern void mode_cardemu_usart1_irq(void);
void Timer_Init( void );
void TC0_Counter_Reset( void );
/* Sim presence pins */
bool mode_cardemu_get_prensence_pol(uint8_t instance);
void mode_cardemu_set_prensence_pol(uint8_t instance, bool high);
#endif /* SIMTRACE_H */

18
firmware/libcommon/include/simtrace_prot.h
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once
@@ -265,10 +261,21 @@ struct cardemu_usb_msg_error {
/* enable/disable the generation of DO_STATUS on IRQ endpoint */
#define CEMU_FEAT_F_STATUS_IRQ 0x00000001
#define CEMU_CONFIG_PRES_POL_PRES_L 0x00
#define CEMU_CONFIG_PRES_POL_PRES_H 0x01
#define CEMU_CONFIG_PRES_POL_VALID 0x02
/* SIMTRACE_MSGT_BD_CEMU_CONFIG */
struct cardemu_usb_msg_config {
/* bit-mask of CEMU_FEAT_F flags */
uint32_t features;
/* the selected slot number (if an external mux is present) */
uint8_t slot_mux_nr;
/* Sim presence pin polarity. Bit 1 is valid bit. Bit 0 gpio value when sim present.
* When sim is present, set sim_present gpio to high -> 0x03
* When sim is present, set sim_present gpio to low -> 0x02
*/
uint8_t pres_pol;
} __attribute__ ((packed));
/***********************************************************************
@@ -315,6 +322,9 @@ struct st_modem_status {
#define SNIFF_DATA_FLAG_ERROR_INCOMPLETE (1<<5)
#define SNIFF_DATA_FLAG_ERROR_MALFORMED (1<<6)
#define SNIFF_DATA_FLAG_ERROR_CHECKSUM (1<<7)
#define SNIFF_DATA_FLAG_ERROR_OVERRUN (1<<8)
#define SNIFF_DATA_FLAG_ERROR_FRAMING (1<<9)
#define SNIFF_DATA_FLAG_ERROR_PARITY (1<<10)
/* SIMTRACE_MSGT_SNIFF_CHANGE */
struct sniff_change {

6
firmware/libcommon/include/simtrace_usb.h
View File

@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
/* SIMtrace USB IDs */
#define USB_VENDOR_OPENMOKO 0x1d50
@@ -25,6 +21,8 @@
#define USB_PRODUCT_QMOD_SAM3 0x4004
#define USB_PRODUCT_SIMTRACE2_DFU 0x60e3 /* was 0x60e2 */
#define USB_PRODUCT_SIMTRACE2 0x60e3
#define USB_PRODUCT_OCTSIMTEST 0x616d
#define USB_PRODUCT_NGFF_CARDEM 0x616e
/* USB proprietary class */
#define USB_CLASS_PROPRIETARY 0xff

4
firmware/libcommon/include/talloc.h
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once

4
firmware/libcommon/include/usb_buf.h
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once

4
firmware/libcommon/include/utils.h
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#pragma once

45
firmware/libcommon/source/card_emu.c
View File

@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include <stdio.h>
#include <assert.h>
@@ -28,11 +24,15 @@
#include "trace.h"
#include "iso7816_fidi.h"
#include "card_emu.h"
#include "simtrace.h"
#include "simtrace_prot.h"
#include "usb_buf.h"
#include <osmocom/core/linuxlist.h>
#include <osmocom/core/msgb.h>
#ifdef HAVE_SLOT_MUX
#include "mux.h"
#endif
#define NUM_SLOTS 2
@@ -776,6 +776,15 @@ static void set_tpdu_state(struct card_handle *ch, enum tpdu_state new_ts)
/* prepare to extend the waiting time once half of it is reached */
card_emu_uart_update_wt(ch->uart_chan, ch->waiting_time);
break;
case TPDU_S_WAIT_TX:
/* If we came from WAIT_RX, disable the receiver and
* enable the transmitter. If we came from WAIT_RX or
* WAIT_PB, reset the waiting time so that we can extend
* waiting time if needed. */
card_emu_uart_enable(ch->uart_chan, ENABLE_TX);
/* prepare to extend the waiting time once half of it is reached */
card_emu_uart_update_wt(ch->uart_chan, ch->waiting_time);
break;
default:
break;
}
@@ -919,6 +928,7 @@ static int tx_byte_tpdu(struct card_handle *ch)
byte = msgb_pull_u8(msg);
card_emu_uart_tx(ch->uart_chan, byte);
card_emu_uart_reset_wt(ch->uart_chan);
/* this must happen _after_ the byte has been transmitted */
switch (ch->tpdu.state) {
@@ -1058,7 +1068,10 @@ void card_emu_report_status(struct card_handle *ch, bool report_on_irq)
sts->flags |= CEMU_STATUS_F_CLK_ACTIVE;
if (ch->in_reset)
sts->flags |= CEMU_STATUS_F_RESET_ACTIVE;
/* FIXME: voltage + card insert */
#ifdef DETECT_VCC_BY_ADC
sts->voltage_mv = card_emu_get_vcc(ch->num);
#endif
/* FIXME: card insert */
sts->F_index = ch->F_index;
sts->D_index = ch->D_index;
sts->wi = ch->wi;
@@ -1079,6 +1092,12 @@ static void card_emu_report_config(struct card_handle *ch)
cfg = (struct cardemu_usb_msg_config *) msgb_put(msg, sizeof(*cfg));
cfg->features = ch->features;
#ifdef HAVE_SLOT_MUX
cfg->slot_mux_nr = mux_get_slot();
#else
cfg->slot_mux_nr = 0;
#endif
cfg->pres_pol = mode_cardemu_get_prensence_pol(ch->num) | CEMU_CONFIG_PRES_POL_VALID;
usb_buf_upd_len_and_submit(msg);
}
@@ -1096,7 +1115,12 @@ void card_emu_io_statechg(struct card_handle *ch, enum card_io io, int active)
card_set_state(ch, ISO_S_WAIT_POWER);
chg_mask |= CEMU_STATUS_F_VCC_PRESENT;
} else if (active == 1 && ch->vcc_active == 0) {
#ifdef DETECT_VCC_BY_ADC
TRACE_INFO("%u: VCC activated (%d mV)\r\n", ch->num,
card_emu_get_vcc(ch->num));
#else
TRACE_INFO("%u: VCC activated\r\n", ch->num);
#endif
card_set_state(ch, ISO_S_WAIT_CLK);
chg_mask |= CEMU_STATUS_F_VCC_PRESENT;
}
@@ -1241,6 +1265,17 @@ int card_emu_set_config(struct card_handle *ch, const struct cardemu_usb_msg_con
if (scfg_len >= sizeof(uint32_t))
ch->features = (scfg->features & SUPPORTED_FEATURES);
#ifdef HAVE_SLOT_MUX
if (scfg_len >= sizeof(uint32_t)+sizeof(uint8_t)) {
mux_set_slot(scfg->slot_mux_nr);
}
#endif
if (scfg_len >= sizeof(uint32_t)+sizeof(uint8_t)+sizeof(uint8_t)) {
if (scfg->pres_pol & CEMU_CONFIG_PRES_POL_VALID)
mode_cardemu_set_prensence_pol(ch->num, scfg->pres_pol & CEMU_CONFIG_PRES_POL_PRES_H);
}
/* send back a report of our current configuration */
card_emu_report_config(ch);

6
firmware/libcommon/source/cciddriver.c
View File

@@ -193,8 +193,8 @@ static void RDRtoPCDatablock_ATR( void )
ccidDriver.ProtocolDataStructure[0] = Atr[2]; // TA(1)
// bmTCCKST0
// For T=0 ,B0 – 0b, B7-2 – 000000b
// B1 – Convention used (b1=0 for direct, b1=1 for inverse)
// For T=0 ,B0 - 0b, B7-2 - 000000b
// B1 - Convention used (b1=0 for direct, b1=1 for inverse)
// bGuardTimeT0
// Extra Guardtime between two characters. Add 0 to 254 etu to the normal
@@ -1005,7 +1005,7 @@ unsigned char CCID_Removal( void )
//------------------------------------------------------------------------------
/// Interrupt-IN Messages
/// This message is sent when any bit in the bHardwareErrorCode field is set.
/// If this message is sent when there is no “outstanding” command, the bSeq
/// If this message is sent when there is no "outstanding" command, the bSeq
/// field will be undefined.
/// \param bSlot ICC slot number
/// \param bSeq Sequence number of the bulk OUT command when the hardware error

86
firmware/libcommon/source/crcstub.c Normal file
View File

@@ -0,0 +1,86 @@
/* SIMtrace 2 firmware crc stub
*
* (C) 2021 by sysmocom -s.f.m.c. GmbH, Author: Eric Wild <ewild@sysmocom.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <stdint.h>
#include "board.h"
#include "core_cm3.h"
#include "usb/device/dfu/dfu.h"
/*
* This file is a bit special, everything has to go to specific sections, and no globals are available.
* No external functions may be called, unless inlining is enforced!
*/
static void crc_check_stub();
__attribute__((section(".crcstub_table"))) volatile uint32_t crcstub_dummy_table[] = {
(uint32_t)0xdeadc0de, /* deliberately choose invalid value so unpatched image will not be started */
(uint32_t)crc_check_stub, /* must be valid flash addr */
(uint32_t)0xf1, /* crc value calculated by the host */
(uint32_t)0xf2, /* crc calc start address */
(uint32_t)0xf3 /* crc calc length (byte) */
};
__attribute__((section(".crcstub_code"))) static void do_crc32(int8_t c, uint32_t *crc_reg)
{
int32_t i, mask;
*crc_reg ^= c;
for (unsigned int j = 0; j < 8; j++)
if (*crc_reg & 1)
*crc_reg = (*crc_reg >> 1) ^ 0xEDB88320;
else
*crc_reg = *crc_reg >> 1;
}
__attribute__((section(".crcstub_code"), noinline)) static void crc_check_stub()
{
uint32_t crc_reg = 0xffffffff;
uint32_t expected_crc_val = crcstub_dummy_table[2];
uint8_t *crc_calc_startaddr = (uint8_t *)crcstub_dummy_table[3];
volatile uint32_t *actual_exc_tbl = (volatile uint32_t *)crc_calc_startaddr;
uint32_t crc_len = crcstub_dummy_table[4];
/* 4000ms wdt tickling */
WDT->WDT_MR = WDT_MR_WDRSTEN | WDT_MR_WDDBGHLT | WDT_MR_WDIDLEHLT | (((4000UL << 8) / 1000) << 16) |
((4000UL << 8) / 1000);
for (uint8_t *i = crc_calc_startaddr; i < crc_calc_startaddr + crc_len; i++)
do_crc32(*i, &crc_reg);
crc_reg = ~crc_reg;
if (crc_reg == expected_crc_val) {
/* this looks a bit awkward because we have to ensure the bx does not require a sp-relative load */
__asm__ volatile("\
mov r0, %0;\n\
mov r1, %1;\n\
MSR msp,r0;\n\
bx r1;"
:
: "r"(actual_exc_tbl[0]), "r"(actual_exc_tbl[1]));
} else {
/* no globals ! */
((struct dfudata *)0x20000000)->magic = USB_DFU_MAGIC;
__DSB();
for (;;) {
/* no functon call, since NVIC_SystemReset() might not be inlined! */
SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
SCB_AIRCR_SYSRESETREQ_Msk);
__DSB();
while (1)
;
}
}
}

4
firmware/libcommon/source/fputs.c
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include <stdio.h>
#include "uart_console.h"

4
firmware/libcommon/source/host_communication.c
View File

@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include "board.h"
#include "llist_irqsafe.h"

4
firmware/libcommon/source/iso7816_fidi.c
View File

@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
*/
#include <stdint.h>
#include <errno.h>

4
firmware/libcommon/source/main_common.c
View File

@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "board.h"

Some files were not shown because too many files have changed in this diff Show More