mirror of
https://gitea.osmocom.org/sim-card/simtrace2.git
synced 2026-03-16 21:28:33 +03:00
5b7a608277
This code already calls osmo_libusb_init further above in the top of the main() function, so there's no use of calling libusb_init() directly in the same function lines below. Change-Id: I2e0c7446aaa644c5aae1059ce91ff9f729903cbc
SIMtrace v2.0
This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.
NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.
Supported Hardware
- Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
- sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
- sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported
This Repository
This repository contains several directory
- firmware - the firmware to run on the actual devices
- hardware - some information related to the hardware
- host - Programs to use on the USB host to interface with the hardware
The host software includes
- libosmo-simtrace2 - a shared library to talk to devices running the simtrace2 firmware
- simtrace2-list - list any USB-attached devices running simtrace2 firmware
- simtrace2-sniff - interface the 'trace' firmware to obtain card protocol traces
- simtrace2-cardem-pcsc - interface the 'cardem' fimrware to use a SIM in a PC/SC reader