mirror of
https://gitea.osmocom.org/sim-card/simtrace2.git
synced 2026-03-16 21:28:33 +03:00
68b072bcc8
The Makefile already runs autoreconf -fi in the "utils" target: utils: (cd host && \ autoreconf -fi && \ ./configure --prefix=/usr --disable-werror && \ make) The override is not useful, as it leads to debhelper running autoreconf as well, but without running ./configure and make in the host directory afterwards. So autoreconf just runs twice. I've also considered to change debian/rules to only run the "fw" target, and not the "utils" target of the Makefile. But that only makes it more complex, as debhelper would then need to run make twice, once in the root directory (as "make fw"), and once in the host directory. We would need to add several lines to debian/rules to do effectively the same thing. Make this change now, as "cd host && dh_autoreconf" doesn't work with debhelper compat level v10 anymore (--sourcedir could be used instead, but as mentioned above, it's not useful). Related: OS#5958 Change-Id: I12f379b4ec2de6adc86557d89319ab1d04ed5e73
SIMtrace v2.0
This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.
NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.
Supported Hardware
- Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
- sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
- sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported
This Repository
This repository contains several directory
- firmware - the firmware to run on the actual devices
- hardware - some information related to the hardware
- host - Programs to use on the USB host to interface with the hardware
The host software includes
- libosmo-simtrace2 - a shared library to talk to devices running the simtrace2 firmware
- simtrace2-list - list any USB-attached devices running simtrace2 firmware
- simtrace2-sniff - interface the 'trace' firmware to obtain card protocol traces
- simtrace2-cardem-pcsc - interface the 'cardem' fimrware to use a SIM in a PC/SC reader