c17bf77ecc
This fixes a bug, identified by the below compiler warning:
libboard/owhw/source/owhw.c: In function 'cardsim_gpio_init':
libboard/owhw/source/owhw.c:39:16: warning: passing argument 1 of 'PIO_Configure' from incompatible pointer type [-Wincompatible-pointer-types]
PIO_Configure(&pins_cardsim, ARRAY_SIZE(pins_cardsim));
^
In file included from ./atmel_softpack_libraries/libchip_sam3s/chip.h:45:0,
from libboard/owhw/source/owhw.c:20:
./atmel_softpack_libraries/libchip_sam3s/include/pio.h:189:16: note: expected 'const Pin * {aka const struct _Pin *}' but argument is of type 'const Pin (*)[2] {aka const struct _Pin (*)[2]}'
extern uint8_t PIO_Configure( const Pin *list, uint32_t size ) ;
^~~~~~~~~~~~~
Change-Id: I4c1de66c0b8475bb355b1d128f6ec88b2f2a7fcf
SIMtrace v2.0
This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.
This is under heavy development, and right now it is not surprising if things still break on a daily basis.
NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.
Supported Hardware
At this point, the primary development target is still the OWHW + sysmoQMOD device, but we expect to add support for a SAM3 based SIMtrace hardware board soon.
The goal is to support the following devices:
- Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
- sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
- sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported
This Repository
This repository contains several directory
- firmware - the firmware to run on the actual devices
- hardware - some information related to the hardware
- host - Programs to use on the USB host to interface with the hardware