mirror of
https://gitea.osmocom.org/sim-card/simtrace2.git
synced 2026-03-16 21:28:33 +03:00
eb8fbc0296
When the uC firmware starts, assert the (high-active) _RESET GPIOs, which will cause the transistors to drive the mPCIe slot !PERST low. There is of course a short instance of time between the uC reset until it executes wwan_perst_init(). To avoid this, a hardware pull-up would have to be re-worked onto the _RESET[1..4] signals on the PCBA Change-Id: I8742fefa4bf02e728e34d5d8cbc0fda771e78ffb
SIMtrace v2.0
This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.
NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.
Supported Hardware
- Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
- sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
- sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported
This Repository
This repository contains several directory
- firmware - the firmware to run on the actual devices
- hardware - some information related to the hardware
- host - Programs to use on the USB host to interface with the hardware
The host software includes
- libosmo-simtrace2 - a shared library to talk to devices running the simtrace2 firmware
- simtrace2-list - list any USB-attached devices running simtrace2 firmware
- simtrace2-sniff - interface the 'trace' firmware to obtain card protocol traces
- simtrace2-cardem-pcsc - interface the 'cardem' fimrware to use a SIM in a PC/SC reader