- A non-ValueError exception from the install run (a card removed
mid-chain, a transport error) was recorded as a 'skipped' attempt with
the error text - but the chain had started and died, which is a
failure. Only a ValueError (a request/eligibility error: the preset's
ISD keyset, the plan) is a skip now; anything else is a 'failed' record
carrying its error. The PWA's failed row falls back to that error when
there is no failing step / status word to show.
- The panel's Clear button is disabled while a batch is active (the
server refuses the clear with 409 anyway) - no pointless error alert.
- api.md and the repo AGENTS document the two outcomes. Tests: a
transport error mid-chain is a failure (and the card stays seen), the
plan's input validation (the block size, a missing cap_hex), the failed
row without a step, the shared ram_format field, and the Clear state.
915 frontend + 921 Python; sw cache simple-v438 (unchanged).
The bulk workflow: one .cap and one set of install parameters applied to
card after card - swap cards and each one installs as soon as it is
equipped. The server owns the loop, so closing the tab or reloading the
page does not interrupt it.
The install chain is now shared: _ram_install_plan(body) builds the
card-independent part (the parsed .cap, the INSTALL/LOAD sequence, the
block size, the transport knobs) and _ram_install_run(server, body, plan,
scc) runs one chain (the per-card preset/keyset/counter resolution
included); the /api/ram-install handler is the plan + run + response, and
the batch worker calls the same pair. The plan is built once at Start,
so a bad .cap or parameter combination is a 400 there (a malformed
archive included - a zip parse error is the caller's, never a dropped
connection), not a per-card failure. _op_keyset_resolve() is the module
form of the handler's _op_keyset() (the dead _keyset_guard method is
gone).
The worker (_ram_batch_worker, state _RAM_BATCH) polls the card state
every 0.5 s and acts on a new card session while connected; a card
already equipped at Start installs immediately. Per card the preset is
matched by ICCID and its ISD role TAR supplies the keyset (v3.26.0) and
the counter seed (v3.20.0); a card with no readable ICCID, no matching
preset or no usable ISD keyset is recorded as skipped with its reason.
A card is attempted once per run (any outcome): re-equipping it records
"already processed in this batch (<outcome>)" and never installs again -
restarting the batch is the retry. Failures carry the failing step and
the remote SW, are never retried and never stop the run; an unexpected
card-handling error is recorded and the loop keeps waiting.
Endpoints: POST /api/ram-batch/start (no card needed; 400/409), GET
/api/ram-batch/status (card-free - the panel polls it during an install),
POST /api/ram-batch/stop (the first _CARD_FREE_POST: it only sets a flag,
so the button works while the worker holds the card lock; a running
install always finishes first) and POST /api/ram-batch/clear (409 while
active). /api/status carries the ram_batch summary (the detailed state
minus the attempts list), so the panel's headline - the live phase, the
current card, the counts - rides the 2 s poll; the attempts report (the
last 500 kept, the total counted) is fetched only when it changed. The
batch and a test run exclude each other (409 both ways); the state is in
memory - a server restart ends a run.
PWA: the Batch install (.cap file, per card) RAM operation shares the
install form (ramInstallCapFields(); the single install uses it too and
now sends ram_format, and the block-size validation moved before the
modal), hides the preset selector + Execute and the preset-mismatch
banner, and renders Start/Stop/Clear, the phase headline (equip the next
card / installing card + live step / stopping after the current card),
the counts and the attempts table (newest first). The panel only works
inside the visible SCP80 RAM pill.
Docs: help EN/RU, api.md (a section + the four table rows), the repo
AGENTS. Tests: the state/report helpers, the per-card decisions, the
worker loop (a real thread + a fake install), the lifecycle and guards,
the HTTP endpoints (the malformed .cap, the stop under a held card lock,
the test-run refusal) and the PWA panel helpers/wiring. 914 frontend +
919 Python; sw cache simple-v438.
- The endpoint validates algorithm16 (3des2/aes, case-insensitive) and mode
(merge/replace or omitted): a misspelled value answers 400 instead of
silently picking 3DES2 or turning an import into a dry run. The choices
come from outfile.ALGORITHM16_CHOICES, derived from the algorithm map, so
the validation and the parser cannot drift apart.
- A present but unusable PIN/PUK value is reported with its raw text: a value
that strips to nothing (e.g. 'abcd') used to vanish without a report line,
contradicting the "nothing is silently dropped" contract. A column absent
from a short row stays silent - it is not present.
- The column-line detection drops the arbitrary 8-character column-name cap:
a candidate header must carry ICCID plus at least one column the import
consumes (a fixed name or a numbered KIC/KID), so a long unknown column
name next to a real one parses while 'ICCID <value>' and
'ICCID CUSTOMER_NAME' config lines are still rejected. Both real samples
are unaffected.
- PWA: a chosen default keyset survives an empty or failed preview (it used
to reset to null, and the import silently fell back to the card's first
keyset); the select renders the preview's keysets plus a remembered value.
- PWA: the destructive Replace mode asks for confirmation first, matching the
other store-wiping actions.
- api.md documents both validations. Tests: the endpoint's 400s and the
replace import, the raw-value report, the header guards, the keyset
preservation and the declined confirmation. 906 frontend + 904 Python;
sw cache simple-v437.
Import many card presets at once from a card vendor's plain-text dump.
The new pure pysim_simple_server/outfile.py (parse_outfile) plus
POST /api/presets/import-outfile: without `mode` the call is a dry-run
preview returning the parsed presets and a report (nothing is stored),
with `merge`/`replace` the same parse runs and the presets go through
the preset store.
The parser: the data starts at the first line whose whitespace tokens
all look like column names and include ICCID (a leading `word:` prefix
is stripped, so a `var_out:IMSI ICCID ...` header line matches while a
config line naming a value - `ICCID:897...` or `ICCID 897...` - cannot);
one row per card follows. Recognised columns (case-insensitive): ICCID,
PIN1/PIN2, PUK1/PUK2, ADM (the ASCII string, hex-encoded), PSK (32 hex;
an optional PSKID/PSK_ID names the identity, defaulting to the card's
ICCID) and KICn/KIDn - one keyset per numbered pair, up to 15;
IMSI*/EKI/KIKn are ignored. The KIc/KID bytes are inferred: the keyset
number is the column number, the algorithm nibble follows the key size
(8 B DES, 16 B 3DES2 or AES - the preview's choice, 3DES2 default,
24 B 3DES3; anything else skips the keyset with a note), both bytes
carrying the same number (TS 102 225 A.2). The TARs never come from the
file: the caller's table (default the three role entries) is applied
with one global default keyset written into every entry (the card's
first keyset when unset). An invalid optional code is dropped with a
report line instead of failing the card; the report names the columns,
the rows read, the parsed keysets and every skip.
The ICCID normaliser fix (both sides, drift-guarded): the trailing F
(or Fs) is the odd-nibble padding - when the rest is digits only it is
the plain digit form (the vendors print the ICCID as digits+F),
otherwise the value is the raw nibble-swapped EF hex; a raw value never
ends in F, so the rule is unambiguous.
PWA: the Import outfile button in the Cards list, the hidden file input
and the preview panel (the common name, the 16-byte algorithm select,
the TAR table with the role defaults editable and + TAR / remove for
extras, the global default keyset select over the parsed keysets, the
merge/replace mode, the parsed cards table, the report, Refresh
preview, Import). The panel joins refreshDynamicI18n for the language
switch.
Docs: help EN/RU (the term outfile stays untranslated in RU), api.md's
new section, the repo AGENTS. Tests: the parser (both fixture shapes,
the column detection, the key-size inference, the options/TAR table,
the PSK identity, the skips, the store round-trip), the endpoint (the
preview, the import, the duplicate skip, the 400s), the normaliser on
both sides, the PWA helpers/wiring and the algorithm16 drift guard
against outfile.py. 904 frontend + 903 Python; sw cache simple-v436.
Every preset TAR entry carries `keyset` (int 1-15) - the keyset every
operation addressed to that TAR uses: mandatory for any non-zero MSL
(the counters are keyset-linked), optional for MSL 00 (allowed: some
cards reject the no-security 00/00 KIc/KID form). The store fills it
automatically when the preset has a single keyset, the validation
refuses an entry naming an undefined keyset, and the schema is 6 (a v5
file loads leniently; editing it forces the fix).
The keyset selectors are gone: the SCP80 TAR field became a select of
the preset's entries (applying the TAR's keyset to the form and seeding
the SPI1 from its MSL); the RAM operations use the preset's ISD role
entry (the PWA sends only the preset id, the ISD TAR, SPI and the
counter override - the server resolves the keyset and the keys:
presets.tar_keyset, _preset_tar_keyset, _resolve_operation_keyset,
_op_keyset, used by send-ota's APDU path, ram-install, ram-install-app
and cap-compat); the counter probe and the test runner's scp80 steps
default to their TAR's keyset (an explicit kvn stays an override). A
security TAR without a keyset refuses the operation ("set it in the
Cards tab") - never a silent keyless send - and the start buttons wait
for a usable operation-TAR keyset.
The TAR probe checks the preset's TAR list only (the standard
TAR_PROBE_TARS list and the custom-TAR localStorage are gone; a `tars`
list selects a subset, a TAR outside the preset is refused), each row
using its own MSL and default keyset. The Cards editor's TAR table
gained a Keyset column (the only keyset preselected, an amber marker
when a security MSL lacks one).
Docs: help EN/RU, api.md's tar-probe contract, both AGENTS. Tests: the
store (the field, the auto-fill, the schema, the string forms), the
server resolution (send-ota + the refusal, the probe's per-row keysets
and refusals), the PWA (the TAR select, the RAM ISD resolution, the
keyset-free requests) - several fixtures updated for the new schema.
891 frontend + 885 Python; sw cache simple-v434.
The v3.25.5 report's follow-ups: a field the server could not use was
silently dropped, and the PWA also filtered non-hex fields client-side
(never sending them). The POST now collects them and names them in the
response - `invalid` (a malformed key/value: not hex, an odd number of
digits, a non-string value) and `unknown` (a well-formed code outside the
qualifier list), both omitted when everything was applied - and the PWA's
Save sends every field, composes "Not saved: 0A (invalid value), 18
(unknown qualifier)" (`pysimPliRejectMsg`) into a new #pli-save-msg line
under the button and shows "Not saved" briefly.
The guide's timer exception now says "card-initiated automatic action"
(the timer retries every 5 s; polling/menu are suspended, not retrying).
Docs: api.md's POST contract, help EN/RU - which also said "22 PLI
qualifiers" while the list has 25. Tests: the rejection lists per case
(odd length, non-hex value/key, non-string, unknown code) and the
valid-save absence, the PWA message helper and the wiring pins.
887 frontend + 875 Python; sw cache simple-v430.
The BIP events flow during a run (v3.25.3), but a TIMER MANAGEMENT timer
the card armed still does not fire then - the v3.25.1 guard retries it
every 5 s until the run ends. Documented as a deliberate exception to
the "the card's own conversation continues" rule, in the authoring guide
and both AGENTS, to review later.
883 frontend + 873 Python (unchanged).
The runner's three FETCH/TR sites (the proactive-drain action, the
expectation, the cleanup drain) built every TERMINAL RESPONSE from the
script, so a card-announced OPEN CHANNEL during a run was answered
"performed successfully" without opening a channel - SEND DATA was
dropped and RECEIVE DATA returned nothing (silent data loss, broken
applet state).
_test_step_tr now routes 0x40-0x44 through _handle_bip_command: the
terminal answers for real, so the card's channels work inside a run.
The script keeps an escape hatch - a respond with `raw` TLVs or a
non-ok result wins (the applet error-path tests).
The BIP events flow during a run again for the channels the card
itself opened: _bip_data_available and _bip_flush_channel_events no
longer stop at the run guard (a channel only exists because the card
opened it) and the runner flushes the link events after each TR, so an
applet's own HTTP/BIP conversation completes inside a scripted run.
BIP control stays blocked (409).
Tests: the drain/expect/cleanup routing, the raw and non-ok-result
overrides, the run-time data-available and link events. 883 frontend
+ 873 Python; sw cache simple-v427.
The authoring guide's run-log sample still showed the CR-set device
identities (TR=81030125008202...); the builders now emit 02 02, so the
example reads TR=81030125000202.... The AGENTS tag-variant bullet now
says "identical parsed values" - the header parser's returned
command-details tag follows the style by design.
883 frontend + 866 Python; sw cache simple-v426.
The live card references 6F06 from MF-tree files (MF/7F20/6F07 ->
8B 03 6F06 14), but the resolver compared only the path's first
segment: the reference fell back to the ADF.USIM copy instead of the
file's own DF copy (ISO 7816-4 5.4.3.3 / TS 102 221 9.2.7 walk-up) -
masked on this card only because all four copies are byte-identical.
- The server reads the DF.TELECOM and DF.GSM copies too (MF/7F10/6F06,
MF/7F20/6F06 - TS 51.011), best effort.
- fcpArrRules resolves by the file's DF chain (own DF first, then
walking up to MF); a reference with no copy in the chain resolves
only when a single candidate exists, otherwise it stays silent.
- The implicit form prefers the file's DF copy (6F06), walking up to
the MF copy (2F06).
Tests: the DF copy wins over the ADF copy; two candidates outside the
chain stay unresolved; a single one resolves; the implicit walk-up;
the server reads the DF-tree paths. 879 frontend + 858 Python;
sw cache simple-v424.
The file manager's decoded FCI shows the '8B' security attribute
reference (EF_ARR 2F06, record 23). The referenced record's access
rules are now rendered as indented muted lines under that row, decoded
with the existing EF.ARR record decoder (AM_DO/SC_DO conditions).
The server reads the card's ARR copies (MF/2F06 and ADF.USIM/6F06,
best effort) once per card session in _apply_equipped_card and keeps
them as server.arr; GET /api/arr serves the cache without the card
lock, a disconnect clears it, and a write to an ARR copy through
/api/write refreshes it. The PWA fetches it lazily per card session
(pysimArrEnsure, keyed by card_session) and resolves the reference with
the selected file's DF context: an ADF.USIM file uses the ADF's 6F06
copy, the implicit reference form too (ISO 7816-4 5.4.3.3 lookup
order). Unresolvable references stay silent.
The '8B' decode now covers all three ISO 7816-4 Table 25 forms:
implicit ARR byte / FID + record / FID + (SEID, ARR) pairs - the pairs
form was mis-decoded as a record before. A snapshot resolves the same
references offline from its own captured EF.ARR copy.
Tests: the three forms, the resolution (DF preference, out-of-range
silence), the snapshot path, the server read/cache/route/write-refresh.
868 frontend + 856 Python; sw cache simple-v423.
Two findings from the review of 2b994a7 (and c9ab15c, reviewed clean):
- trCommandCode() uppercased the query but compared it with the raw
CMD_NAMES values, so the one mixed-case entry ('End of the proactive UICC
session', 0x81) never matched. No visible effect today (0x81 has no table
entry - it falls back to the flat list), but a future map entry for a
mixed-case name would silently not group. The comparison is now
case-insensitive, pinned by a test.
- The docs now say that the commands the spec's tables omit (SEND SS / SEND
USSD / SEND SHORT MESSAGE / GEOGRAPHICAL LOCATION REQUEST / End of the
proactive UICC session) keep the flat list, like ANY and the drain's rows.
Also added independent semantic pins for the parsed table (REFRESH 03/08,
PLAY TONE 09, TIMER MANAGEMENT 24, LAUNCH BROWSER 26, OPEN CHANNEL 28/3A/3B,
the MMS commands 27/3D, GET READER STATUS 38 - a column-shift regression in
the parse would break them).
861 frontend + 842 Python.
The step editor's result select offers the full TS 102 223 8.12.0 list; the
spec's applicability table (Tables 6.1/6.2/6.3, "Proactive commands versus
possible terminal response") now groups it by the selected command: the
command-relevant values first (an <optgroup> "relevant for <command>"), the
rest after ("all other results").
The grouping is ordering-only - nothing is hidden, the manual hex entry
covers everything, and ANY (the drain's respond/first too) stays a flat list,
so a stored result always matches an option and real-card deviations remain
reachable.
TR_RESULT_BY_COMMAND is parsed from the pinned PDF (41 commands) and pinned
by frontend/tests/tr_result_by_command.json; trCommandCode() resolves the
editor's command names to their type codes (the first code per name,
matching testCommandOptions) and testFormSelect gained the optgroup support.
Tests: the map vs the parsed fixture, the grouping and the union (nothing
lost), the optgroup rendering and the call-site pin. 861 frontend + 842
Python; sw cache simple-v421.
A script's `event` value may be a code (a hex byte or a number) or one of the
server's name keywords (location_status, access_tech, network_rejection,
data_connection, ... - events.py's EVENT_NAMES); the API accepts both. The
PWA parsed every value as a hex string: the step list showed
'EVENT 0xaccess_tech' (the unparsed fallback), the editor fell back to event
03 (Location status) with the location field set, and saving then rewrote
the step to that event - silently corrupting name-authored scripts (the two
Alfa2G trigger scripts use access_tech/data_connection).
A mirrored EVENT_ALIASES map plus an eventCode() resolver (number / hex byte
/ name -> code) now feed the step summary, the editor's event block and the
event check; the summary's fallback no longer prefixes a non-numeric value
with 0x, and the editor keeps its canonical hex form on save (the same code).
Drift guard: the aliases live in frontend/tests/event_vectors.json, asserted
by the Node test (the PWA's map + resolver) and the Python test
(events.EVENT_NAMES + resolve_event). Tests: 856 frontend + 839 Python;
sw cache simple-v419.
The step editor's result select (the expect's respond, the proactive-drain's
respond/first) offered five symbolic values with no hex. It now offers the
full TS 102 223 v18.3.0 8.12.0 list (00-3F), labelled '<hex> - <alias>' (or
'<hex> - <spec name>'), plus a manual hex entry, and an optional
additional-information byte for the general result (83 02 <result> <info>,
default 00; the 8.12.2 terminal-problem values are suggested through a
datalist).
The script aliases were corrected to the spec: refused 03->22,
not_understood 04->32, modified 06->07, no_response 22->12 - a stored script
using one of them now answers with the corrected value; no_response stays
accepted for compatibility but is no longer offered by the editor.
The server's TR decode tables (_RESULT_NAMES_BASIC/_GENERAL, a GSM 11.14
mix displayed in the proactive log) are replaced by the spec table plus the
8.12.2 additional-information names; the dcs field parses as hex (0A used to
be refused and 10 read as decimal 10); the drain summary's 22 label is fixed.
The result labels are not translated (spec text); the unused RU keys were
removed. Shared fixture frontend/tests/tr_results.json, drift-guarded by
both suites. 855 frontend + 838 Python; sw cache simple-v418.
An unconfigured PLI dictionary answered result-ok with no data object,
which confuses applications that expect data. The dictionary now has a
base layer of sensible defaults for the qualifiers the pinned ETSI specs
define (TS 102 223 8.x, tags per TS 101 220 V18.3.0 Table 7.23):
- location as the test network 001/01 + LAC 0000 (8.19),
- the classic test IMEI 490154203237518 as F-padded BCD (8.20) and its
IMEISV (8.74),
- language 'en' (8.45), Timing Advance (2E/AE), E-UTRAN (8.61; UTRAN +
E-UTRAN for the multiple-technology qualifier 0E),
- automatic search mode (8.75), a full battery (8.76).
An override set through /api/pli-dict wins, and clearing a field restores
its default (the PWA's Save re-renders the effective values; the GET returns
the override or the default for the full qualifier set). The date/time
qualifier stays empty so the host clock keeps answering it; the
3GPP/3GPP2-specific qualifiers (NMR, ESN, MEID, CSG/HNB, WLAN, slices,
CAG, ...) stay empty - the ETSI specs define no contents for them, and a
fabricated object would mislead the application more than no answer.
Verifying the values against the pinned tag table exposed pre-existing bugs
in the PWA's PLI inline codecs, fixed here:
- Timing Advance used C6 (a 3GPP2 tag) -> 2E/AE;
- IMEISV used 94 (the IMEI tag) -> 62/E2;
- Network Search Mode used AD (the Language tag) -> 65/E5, and its labels
were swapped ('00' Manual / '01' Automatic per 8.75);
- the battery field was a percentage where 8.76 is an enum ('00' very low
... '04' full, 'FE'/'FF');
- encImeiPli padded the odd 15th digit with 0 instead of F (TS 124 008).
Docs: help EN/RU, api.md, the guide. Tests: the defaults + the resolution
order (Python), the HTTP endpoint's defaults/override/clearing, the codec
tags/labels and a server-defaults drift guard (Node). 846 frontend +
829 Python; sw cache simple-v414.
A suite may carry `start_reset` (store schema v2, default false; the editor's
"Start with card reset" checkbox): before the run, the server physically
resets the card and runs the full re-initialization - `_card_reset_reinit`
(extracted from the eSIM profile-switch reinit) does reset_card() + equip +
_apply_equipped_card + the shell registration probe.
The reset runs in _test_suite_run_request before the preset/ADM checks:
- the run's preset must still match the post-reset ICCID (a mismatch refuses
the start with a re-select hint),
- a require_adm suite re-verifies the ADM for the new card session (the
latch is per session).
The suite report carries start_reset + reset {ok, iccid, ms}; the PWA shows
"started with a card reset" in the report header and a RESET badge in the
suite list. Mid-run resets stay fatal.
Documented caveat: the init drain consumes the card's initial proactive
commands, so a script cannot catch the first command after the reset (they
stay in the proactive log).
Docs: test-scripts.md, api.md, help EN/RU, repo AGENTS.
Tests: 843 frontend + 827 Python; sw cache simple-v413.
The review of the v3.22.7 fix asked when an expect can raise after its
FETCH: the realistic case is the scripted TERMINAL RESPONSE encoding -
_encode_text raises UnicodeEncodeError when respond.text has a non-GSM
character while dcs is 00 (the default) or 04, i.e. after the command was
fetched and with the card's proactive session left unanswered. The other
candidates are guarded (the TPDU/PoR/file-list parsers, the PLI dictionary)
or need the card to be gone (a transport failure between the FETCH and the
TR).
normalise_respond now runs the same coding the TR builder uses and refuses
the script at load with an actionable message ("use dcs 08 (UCS2) for
non-GSM characters"), so the failure happens at save/run start, before any
FETCH; UCS2, ASCII and the empty answer are unaffected.
Also from the review: the guide's run-log line now documents the v3.22.7
format (TEST-RUN step N failed (<level>): ...), and the "unguarded item
text decode" observation proved a non-issue - _decode_stk_text is internally
tolerant (odd UCS2 / unknown prefixes fall back without raising), so the
item parsers are left alone.
Tests: a non-GSM text with the default dcs and with 04 is refused (the
message names dcs 08), UCS2/ASCII/empty pass, and a whole script is refused
with the same message. 843 frontend + 822 Python; sw cache simple-v412.
The runner's step loop caught an exception and hard-coded status "error" +
stop, ignoring on_fail - so a file-read of an absent optional file
(re-verified live on 3.22.6: MF/A153/49AC, note "6a82: Wrong parameters -
File not found", on_fail "warning" still stopped the run) could not express
the "read an optional file" pattern (49AC is documented optional: its
absence means no menu password).
The handler now treats a raised error as a failed "Error" check at the
step's level (the message as actual/detail and the note): on_fail "warning"
warns and the run continues, the default still stops; the drain-if-pending
behaviour is unchanged. Every raised exception is treated the same - the
two "file absent" raise paths (pySim's SwMatchError for model files and
probe_file's RuntimeError with the decoded SW for custom FIDs) cannot be
told apart by type, and load-time validation (normalise_script) stays
strict.
Docs: the guide's on_fail paragraph and run-errors list (the 6A82 bullet),
api.md and help EN/RU. Tests: a raising file-read with on_fail "warning"
warns and the next step runs; without on_fail the run still stops.
843 frontend + 821 Python; sw cache simple-v411.
The runner's unexpected-pending-command guard fired for any non-expect step,
so a proactive-drain after a step that answered 91XX failed with
"unexpected proactive command pending (SW 91XX) - add an expect step or a
status action" - contradicting the drain's own doc ("consume whatever the
card announces") and the v3.22.2 RAM recipe ("an expect or a proactive-drain").
The guard now exempts a proactive-drain step: its STATUS poll re-announces
the unfetched command, fetches and answers it, and the drain's final-SW and
pending handling is unchanged (a still-pending card is handed to the next
step, an idle card passes). No pending-length plumbing: STATUS-first keeps
the drain's attempts/log semantics and tolerates a card that dropped the
command. The guard note now names the drain instead of the misleading
"status action" (a status action in that position also trips the guard).
Docs: the drain section in test-scripts.md, api.md's action list and the
help EN/RU drain bullet. Tests: 839 frontend + 819 Python; sw cache
simple-v408.
Three test-management issues:
- an expectation whose command type did not match the pending command
hard-coded level 'error', so on_fail "warning" tolerated "no command
pending" but not "a different command is pending". The check now honours
the step's on_fail - the tolerant form for "the applet either asks X or
does Y" (the mismatched command is still fetched and answered).
- moving a script between suites could answer 500 and leave two owners:
_test_script_move detached only from the suite named by the script's
suite_id and appended to the target unconditionally, so a duplicate
listing or a stale suite_id (a hand edit, an interrupted move) collided
on the attach. It now detaches from every suite that lists the script,
takes the on_fail from the explicit owner (suite_id if that suite lists
it, else the first lister), updates the script first (a refused
validation changes nothing) and re-attaches with a prune; the same-suite
no-op only applies when the target really is the only lister.
- reconcile_scripts_to_suites() now prunes duplicate listings to the
explicit owner (it only adopted before), so those states self-heal at
startup and after a bundle import; the "Imported scripts" suite is only
created when there are orphans.
Docs: the bundle-import note (importing into the source store duplicates
the suite and its scripts - the round-trip is not idempotent) and the
expectation on_fail clarification.
Tests: 839 frontend + 818 Python; sw cache simple-v407.
Two reported gaps:
- a scripted PROVIDE LOCAL INFORMATION expectation answered with an empty
TR - the PLI dictionary (and the host clock for the date/time qualifier)
was silently inert during runs while the poll path used it all along, so
an applet waiting for its data stalled behind a passing expectation. A
POLL INTERVAL expectation likewise never echoed the Duration (6.8.4).
testscript.build_tr() gained `answer_tlvs` (inserted after the Result per
the 6.8.0 order, before text/item/raw) and the shared
_test_terminal_response() wires the expect step, the proactive-drain
action and the run cleanup to it; the script's `raw` overrides, and a
non-success result gets no data object.
- a GP INSTALL/LOAD/DELETE step always failed the default exact-9000 check
although the envelope SW 91XX is the successful answer (the re-announced
SET UP MENU; XX is the pending command's length, never pinnable).
Documented rather than loosening the default: a new "Driving a RAM install
from a script" subsection in docs/test-scripts.md (the 9??? mask + por
any, the per-step pending rule - a proactive-drain/expect after every
91XX step), a sentence at the sw-default bullet, and an scp80
default-pinning test.
Docs: api.md's respond clause, help EN/RU's TR Config note.
Tests: 839 frontend + 812 Python; sw cache simple-v406.
The three nits from the review of the rename/docs commits:
- the PWA comment above TEST_ACTION_KINDS still claimed the final SCP80
counter is written back - the server persists every consumed counter into
the preset and the snapshot carries the latest values (display only);
- test-scripts.md's `por` paragraph regained the RM raw fallback the rewrite
dropped: a remote-management reply that cannot be the compact structure
(its command count exceeds the command script that was sent, or the data
is too short for TS 102 226 5.1.2 Table 5.1) is raw too;
- the RU help label reads "Очистка очереди проактивных команд" (the mixed
Latin "proactive" is gone; the rest of the RU help says "проактивных
команд"). sw cache simple-v405.
Docs/comment only - tests unchanged and green: 839 frontend + 804 Python.
- the actions table still named the drain kind `proactive` (the rename swept
the prose but missed the table row);
- the `por` check paragraph carried the pre-3.21.0 rule (the command-count
bound): the response form follows the command's TAR and a short reply is
raw too - now cross-referenced to "The three status words";
- the event action's `src`: the editor writes the event's own source
(network for MT call / IMS registration), a hand-written step without
`src` is sent as the terminal;
- the format line notes the kind was `proactive` until 3.22.1;
- the cleanup section notes that each suite member ends the same way, the
"no actions" note names the ok drain, and the polling limitation mentions
proactive-drain.
Docs only.
The kind string `proactive` read like an expectation of a proactive command
(`expect` is the step type for that) although the action consumes and answers
them. Renamed everywhere:
- ACTION_KINDS / TEST_ACTION_KINDS (drift-tested), the normaliser branch and
its error strings, the dispatch and the helper names (_test_run_drain,
_drain_require_match/_label);
- the report label is DRAIN and the PWA summary reads "DRAIN x5 require ...
TR ok";
- the editor/collect/summary/problem branches, docs/test-scripts.md
(Proactive drain), docs/api.md, help EN/RU ("Очистка очереди proactive");
- the tests (TestRunnerProactiveDrain, the normalisation/data-check tests).
No stored scripts used the old kind (unpublished series), so there is no
alias and no migration. sw cache simple-v404.
Tests: 839 frontend + 804 Python green.
Second review round on the unpushed v3.20.0-v3.22.0 batch:
- install parameters: a zero memory quota (nv_quota: 0 - the vendor
reference form's C7 02 0000 C8 02 0000) is composed instead of being
dropped as "unset" (only None/blank leaves the TLV out); a truncated EF
length in stk_params is refused instead of read as an empty EF.
- test suites: a suite whose member script is gone is repairable - the
update endpoint accepts pruning a dangling reference (a removal of a
live script stays refused; the PWA's row Delete prunes it), and
reconcile_scripts_to_suites() lists an orphan even when its suite_id
write is refused by the validator, so a stored script that no longer
validates stays visible in the editor and fails at run start with the
message instead of disappearing.
- engine/PWA: the proactive action refuses a check.data (its result data
is the drained-command list - the check was silently ignored); the
vestigial _testScriptDraft is gone; berLenStr emits the 2/3-byte BER
long form (a >255-byte C9 composes correctly).
- docs: api.md (the stop cleanup answers ok, never an automatic cancel;
the server persists the counters - the PWA does not write them back; the
suite bundle import always merges the scripts; the quota-0 note) and
test-scripts.md (the event action covers all modelled events; the
direct-create path needs a suite_id; the format history); help EN/RU
counter wording.
- tests: the zero quota / truncated EF, the prune path, the invalid-script
listing, the proactive data-check refusal, berLenStr and the >255-byte
C9. Tests: 839 frontend + 804 Python; sw cache simple-v403.
The suite/script ownership invariant could break silently: a suites import
with mode "replace" wiped the suites while their scripts stayed behind
(suite_id pointing at gone suites - invisible in the UI), a scripts import
with mode "replace" left every suite's member list dangling, and a script
whose suite_id disagreed with its listing suite stayed inconsistent.
- server: reconcile_scripts_to_suites() repairs the invariant - a script a
suite lists adopts that suite (the member list is authoritative), a script
no suite lists joins "Imported scripts"; migrate_scripts_to_suites()
delegates to it (the startup migration is the same pass) and the suites
import runs it after loading, so a "replace" adopts the wiped suites'
scripts instead of losing them.
- the scripts import refuses mode "replace" while any suite still lists
scripts (400 naming the dangling references; merge is the normal path).
- nits from the review: a legacy numeric `event` is no longer parsed as hex
in the step summary/error check (0x0A displayed as 0x10), and an integral
float memory quota (a JSON client's 200.0) is accepted.
- tests: the reconciliation (missing suite, listed-but-mismatched,
idempotent), the scripts-replace guard (refused/allowed), the
suites-replace adoption, the float quota, the numeric-event summary.
Tests: 838 frontend + 800 Python; sw cache simple-v402.
The test-script event action edited its fields as a JSON textarea and only
accepted the four events events.py builds; every other event needed the raw
envelope action with hand-copied hex. It now renders the same EVENT_FORMS
form the Phone tab's send dialog uses, for every modelled event (29; no
release gating - a script may target another card).
- PWA: the field renderer/collector is shared (eventFormFieldsHtml /
eventFormValues / eventFormPatternError / eventFormSrc / eventFieldGroupsUpdate);
the Phone tab keeps its ids, its release gating and its onchange updaters,
the step editor uses test-f-ev- ids, the generic group updater and a live
Event data (hex) preview with the one-ENVELOPE check. The event select
lists all EVENT_FORMS events (the numeric keys are decimal strings -
parseInt(k, 10)); the action stores the collected fields, the built data
and the event's source (fixed cfg.src or the cfg.srcField input - the
action never carried src before, so MT call / IMS registration / slices
could not be network-sourced). The JSON textarea is gone.
- engine: the `event` action keeps `fields` validation for the four
server-built events (a stray data hex is ignored) and accepts the
form-built `data` for every other event - hex-validated and checked
against events.EVENT_DATA_MAX (244, the one-ENVELOPE budget; server.py's
_EVENT_DATA_MAX now reads it from events.py). The runner builds the four
at run time (fresh host clock) and sends the stored data for the rest.
- tests: the engine's data path (accepted / missing / malformed / oversized,
the four still fields-built), the runner sending the data (fake scc), the
editor's collect/prefill/patterns/source (Node), the shared helpers.
Docs: test-scripts.md, api.md, help EN/RU. Tests: 838 frontend +
797 Python; sw cache simple-v401.
A suite is the root object: every script belongs to exactly one suite, the
suite holds the ordered member list by reference - the optional setup first,
the members, the optional teardown last - and runs them in one card session,
without resets and without resume.
- test_suites.py: the suite store (test_suites.json, --test-suites), validated
and atomic like the script store: roles normalised (setup first, teardown
last, at most one of each, a script appears once per suite), per-member
on_fail stop/continue and the suite-level require_adm.
- test_scripts.py schema v2: suite_id/require_adm; list_by_suite()/orphans();
the import reports the id_map a bundle import remaps with. v3.21.0 scripts
without a suite are attached once to an auto-created "Imported scripts"
suite (migrate_scripts_to_suites, called from __main__).
- API: /api/test/suites (+ update|delete|import - delete refused while
non-empty; the bundle import imports the scripts first, remaps the suite
references and skips unresolvable ones); the scripts endpoints gain
suite_id/require_adm plus move|copy (delete detaches from the suite first;
a suite update refuses a membership change).
- runner: /api/test/run {suite_id} resolves the members and the preset, runs
the ADM gate, then setup -> members (per-member on_fail) -> teardown. The
teardown always runs on a stop or a failure (skipped only when the card is
gone; it clears the stop flag for its duration); a card reset stops the
suite, skips the remaining members and is flagged. Members' live steps land
in the shared snapshot, their records (status/steps/note/log excerpt/
counters) in _TEST_RUN['suite']; the summary carries the counts, wall time,
preset, the SCP80 counters before/after per keyset and the session flags.
_test_log buffers the semantic lines (bounded) for the report's per-member
excerpts.
- ADM gate (_ensure_adm): a suite/script require_adm verifies the matched
preset's key once per card session (the /api/verify-adm badge sets the same
latch); a failure refuses the start, stamps the session (no automatic
retry) and needs a manual verify.
- PWA: the Test script pill becomes four views - the suite list (default),
the suite editor (the script list: role badges, on_fail, up/down, per-script
Run/Edit/Move/Copy/Delete, Add script with the templates), the script editor
(the step list; a single run shows its result under the steps and is not
preserved) and the suite report (per-member blocks with the step table,
notes and run log; summary; export JSON/Markdown). Suite bundles export/
import; the legacy script export imports into "Imported scripts". EN/RU.
- tests: the suite store/migration, the runner orchestration (order, on_fail,
setup failure, stop, card reset, teardown, per-member logs) and the ADM gate
(Python); the suite HTTP paths; the PWA report/Markdown/wiring (Node).
Tests: 833 frontend + 794 Python; sw cache simple-v397.
Five reported issues, plus the action that makes an explicit drain possible:
- on_fail is honoured by every step failure: an expectation with no pending
command (or a FETCH that returns nothing) fails as a Command/Fetch check at
the step's level instead of raising past it; the default still stops the
run, on_fail "warning" continues (the tolerant consume-if-pending form).
- the run cleanup answers ok (0x00) and keeps draining while the TR answers
91XX (bounded); a cancel is only sent when a script asks for it - it tells
the card the user aborted the session and pushes assertive applets onto an
error path.
- new `proactive` action: STATUS rounds consume every announced command
(respond/first TERMINAL RESPONSE results, attempts/interval_ms bound) until
the card answers 9000; an optional require asserts at least one drained
command (an empty drain fails it), the final SW is the step's SW check and
a still-pending command is handed to the next step. PWA editor + summary +
validation, EN/RU help, docs, action-kind drift test.
- the PoR response form follows the command's TAR: _tar_is_rm (preset role
entries + the TS 101 220 Annex D ISD/RFM allocations) decides; a non-RM
TAR's reply is always raw (TS 102 226 4) - no fabricated status word even
when the bytes happen to parse (01 00 0B 91 ... used to read as SW 000B).
- a secured data too short for the compact structure (a 2-byte applet reply)
is recovered by _por_header_parse (the decode minus the compact parse; a
malformed packet or a failed RC/CC/DS check still yields no por) and
reported raw, so short applet replies are assertable via por.data.
Docs: test-scripts.md, api.md, help EN/RU, repo AGENTS. sw cache simple-v396.
Tests: 825 frontend + 755 Python green.
Two reported SCP80/RAM issues, both confirmed against the specs:
- docs/api.md called `stk_params` a "Hex CA TLV", but TS 102 226 8.2.1.3.2.1
puts the CA *inside* the System Specific Parameters EF ('EF'), and the PWA
builds `EF <len> CA <len> ...` (the SIM access domain leads the CA value as
`01 <ad>` / `00`). A client following the doc sent a CA at the wrong level.
- the RAM composition appended the STK part after a caller-composed
C9+EF(quotas) prefix, producing TWO EF objects. The card read the first
(the quotas) and ignored the CA: the install was accepted (por_ok) but the
toolkit parameters were never registered, so no STK menu appeared (live
2026-10-05). Per GPD_SPE_013 v1.1 Table 6-5 (pySim's
gen_install_parameters) the quotas (C7/C8) and the CA share ONE EF; an
EA-form STK part is a sibling of EF (the reference TCA loader's
`C9 00 EF 00 EA ...`).
- server: `_compose_install_params()` (used by `_cap_install_apdu` ->
`_cap_apdu_sequence`, hence /api/ram-install, /api/ram-install-app,
/api/scp81/gen-install and the PWA's install script template) enforces the
rule: a caller-composed EF plus an EF-form `stk_params`, a bare CA, a
malformed EF and quotas next to a non-empty `install_params` are refused
(400 / `{"ok": false}` with the fix named); with an empty `install_params`
the quotas and an EF-form CA are composed into one EF
(`C900 EF{C7?,C8?,CA}`), an EA part stays a sibling.
- the documented `nv_quota`/`volatile_quota` fields are now real (they were
named in the docs but implemented nowhere): integers composing C8/C7.
- PWA: `composeRamInstallParams()` composes the same single EF itself (a
CA-form STK field takes the quotas into its EF, the merged EF travels in
`stk_params`), the RAM install bodies send it, the placeholder shows it
with a note when the quotas moved into the STK EF, and a refused request
(no steps) reports the error instead of "FAILED at step: undefined".
- docs/api.md: the corrected `stk_params` description with both accepted
shapes, the composition rule paragraph with the refusal cases, the fixed
example (`C90000` -> `C900`), and the /api/ram-install-app and
/api/scp81/gen-install cross-references.
- tests: composition unit tests (merge/refusals/EA-sibling) and the
ram-install-app 400 paths (Python); `ramQuotaTlvs`/`composeRamInstallParams`/
`ramInstallParamsCompose` pins incl. the CA merge (Node).
Tests: 824 frontend + 740 Python; sw cache simple-v395.
The OTA CPI information element is a request field (default true) on
/api/send-ota and the RAM family but was only mentioned in passing:
- /api/send-ota: an "SMS framing - includeCpi" paragraph (the CPI IE marker
per TS 31.115 4.2/4.3; 137 vs 140 octets in a single SM, first concatenated
segment 132 vs 134; the RAM/ISD operations send with it, a concatenated
command carries it in its first SM; what false does) and
"includeCpi": true in the request-body example;
- /api/ram-install and /api/ram-install-app: field-table rows;
- /api/cap-compat: the "as /api/ram-install" field list;
- /api/tar-probe: a sentence.
Docs only - no version/sw bump.
The scripted-SELECT note cited TS 102 226 7.2 alone although the paragraph
right above lists both B00000 and B00001: 7.2 is the UICC shared FS RFM
application (implicitly selected in MF), while an ADF RFM application starts
in its ADF (7.3). Also says the script has no *use* for an FCI rather than
nowhere to put it.
Two boundary flaws found reviewing v3.20.0:
- /api/send-ota decoded the PoR with the request's `cntr`, not the counter
the packet was actually built with. With the new seeding an omitted
counter is the normal case, so a warning ENVELOPE's verdict - notably the
live card's cntr_low PoR - could fail its RC/CC check and be lost (the
success and the failure path are both fixed). Tests pin the decode counter
on both paths; the failure path also echoes the effective `cntr`.
- the PWA's effective counter (preview / verify / the older-server fallback)
fell back to the preset's first keyset and then 1, while the server's empty
seed builds counter 0 (no preset / kvn 0 / an unknown keyset). A manual
form or a keyless packet then produced a spurious "Verify vs pySim"
MISMATCH and a preview that differed from the delivered packet.
spPresetCounterValue()/spCntrEffective() now mirror _preset_counter_seed()
exactly: the packet's matched keyset, else 0.
- the `OTA SEND: counter not tracked` line reflects the effective counter (a
seeded value is logged too); docs/api.md records that the seed uses the
packet's keyset whatever SPI1.b5b4 says.
Tests: 823 frontend + 737 Python; sw cache simple-v394.
The counter an operation consumed was re-entered by the PWA on every send
(the form field was filled from the preset and posted back), so a stale tab
could send a value the card rejects (cntr_low), and typing in the field
silently wrote the preset. Now the store is the single source of truth and
the form field is a per-send override (Option B).
- _preset_counter_seed: an explicit `cntr` in the request wins (a hand send,
the counter probe or a pre-built packet may deliberately pick one);
otherwise the preset store's value for the packet's keyset. Wired into
/api/send-ota (the APDU path; the pre-built `sp` path keeps the caller's
bookkeeping value - the packet carries its own counter), /api/ram-install,
/api/ram-install-app, /api/cap-compat, /api/tar-probe and /api/sp-verify
(the reference must use the counter the JS packet was built with).
- the send-ota response echoes the effective `cntr` (a caller that omitted
one learns what was used) and the OTA SEND log line prints it.
- persistence is unchanged and monotonic (presets.set_counter refuses
backwards writes), pinned by tests: an explicit lower counter is used for
the packet but never lowers the store, a higher accepted one is saved.
- PWA: the Secured packet counter field starts empty with the preset's next
value as its placeholder (auto: <cntr>); typing affects that send only and
is never written to the preset (spCntrSyncPreset is gone), spParams /
getRamSpParams omit an empty counter, the RAM/send flows sync only the
local preset copy (forward-only) instead of filling the field, the +/-
buttons start from the effective value, and the preview/verify packet is
built from the effective counter (genSp). Placeholder translated EN/RU.
- the runner and /api/counter-probe keep their existing seeding (the probe
already starts at the failed value and walks above it).
- docs: api.md's optional-`cntr` contract + seeding notes on every endpoint,
help EN/RU 3.1. Tests: 822 frontend + 734 Python; sw cache simple-v393.
The alfa-dsa RFM script work showed a card refusing the P2='00' (FCI) form
of a SELECT inside a secured command script with 6A86, while P2='0C' (no
response data) executes - and a script has nowhere to put an FCI anyway.
Worksheet 1 gains the note (TS 102 226 7.2: the RFM application starts in
MF); the repo AGENTS records the observation. Docs only - no code, no
version or sw change.
The alfa-dsa control-commands run showed the error case: an applet-level
refusal (envelope 6200 for an unknown command) carries no PoR at all, so
a por expectation on such a step can never match. The authoring guide's
status-words section now states that a 62XX/63XX envelope does not
guarantee a response packet - other warning paths still deliver one (the
low-counter case arrives via SEND SHORT MESSAGE) - and that a step
expected to be refused should leave por at its "any" default or assert
"none"; help EN/RU notes the same. docs/test-scripts.md only, no code
change; sw cache simple-v392 (help files are precached).
The script author read por.sw as the envelope SW, so a por.sw expectation
on an applet's own TAR failed with (none).
- docs/test-scripts.md: a 'The three status words (envelope SW / PoR
status / R-APDU SW)' table in the authoring section - where each one
comes from, the script field and the report row - plus a cross-reference
from the por check paragraph; help EN/RU 8.9 points at it.
- a failed por.sw check on a response_type: 'raw' decode carries the check
detail 'the response is application data - an applet's own TAR has no
R-APDU SW; assert it with data' (the PWA renders check details).
- the runner's log prints APP DATA=<hex> (no R-APDU SW) for application
responses instead of the misleading R-APDU SW=(none) data=...; the
compact/scripting lines are unchanged.
- the step editor's custom-PoR block gets a one-line hint about the same.
Tests: 821 frontend + 730 Python; sw cache simple-v391.
pySim's CompactRemoteResp was applied to every response packet, so a
third-party applet's own TAR response parsed as count=128/SW=0110/data=''
(live 2026-10-04: the alfa-dsa applet's `80 01 10`) - a fabricated status
word and a lost response.
_decode_por now takes the plaintext command script's length (cmd_len): the
compact structure's command count cannot exceed it (TS 102 226 5.1.2
Table 5.1 - each command needs at least one byte), so a larger count is
classified `response_type: 'raw'`, the secured data becomes
`decoded.last_response_data` (a por.data check matches it) and no SW is
decoded; `secured_data` is exposed in every case.
Callers pass cmd_len where they know the plaintext: the test runner's scp80
step (None for a pre-built packet; carried in ctx['last_scp80'] for the
submit-PoR path), /api/send-ota (both paths), the RAM step sender and the
counter probe; a caller without it keeps the previous parse.
Docs: test-scripts.md and api.md describe the raw fallback.
Tests: 821 frontend + 729 Python; sw cache simple-v390.
An audit of docs/test-scripts.md against the engine (testscript.py,
events.py, the runner) found a handful of doc-level gaps, now fixed:
- the scp80 param defaults (tar = the preset's ISD role TAR, spi1 = that
TAR's MSL, spi2 = 01, kvn = the first keyset);
- the counter rule as implemented: the run advances/persists the counter
after every answered scp80 step when SPI1 requests a counter check
(refused packets move the local value forward too - it only moves up);
- respond is optional (an omitted object answers ok/0x00);
- the run-log section: the exact READ BINARY/READ RECORD/UPDATE BINARY,
SCP80 WRAPPED=/SP= and 'TEST-RUN step N failed:' lines;
- Known limitations: an expanded-format 61xx has no in-packet GET RESPONSE
(TS 102 226 5.2.1.1) - send the GET RESPONSE as a follow-up scp80 step;
- sms check da: a leading + and whitespace are ignored. The engine now
drops the + (the TPDU carries the international flag in the dialling
type, so '+79...' could otherwise never match the parsed digits);
docs/api.md and the local AGENTS note it.
Tests: 821 frontend + 726 Python.
Review of 7250dbd:
- the step editor's menu-select form gains a Match case select
(Case-insensitive (default) / Case-sensitive); the step summary flags a
case-sensitive step with (case), the saved params carry
case_sensitive: true only when chosen, and the docs say the editor
authors the flag.
- docs/api.md: fix the 'with an optionally' grammar.
- the Variant-2 menu test's comment claimed a contains match while it is an
exact one; a real contains leg is added ('ыбор' -> item 128).
- timeless rationale for the case-insensitive default; the format note now
dates the change.
sw cache simple-v389 (index.html/help changed).
Tests: 821 frontend + 726 Python.
No test scripts have been authored yet, so the format is still free to
change - the menu-select text match is now case-insensitive by default
(menu labels are UI text; case_sensitive: true still forces an exact-case
match, and a miss on it names the case-insensitive candidates).
Verification against the live card's own bytes (captured 2026-10-04):
- the Annex A Variant 2 Cyrillic menu (ids 128..130) resolves by text and
the case behaviour above is pinned ('кофе' -> item 130);
- the applet's SEND SHORT MESSAGE (alpha 'Отправка...', SMS-SUBMIT to
+79332505884) pins the new alpha and sms checks and the run-log line.
docs/help/api updated; sw cache simple-v388 (help pages changed).
Tests: 819 frontend + 726 Python.
The test scripts get the pieces an applet test needed:
- scp80 check.por accepts an object {status?, sw?, data?} asserting the
decoded PoR of this very exchange (inline or via SEND SHORT MESSAGE);
the evaluation is shared with the expect-step por check
(_por_check_results). The editor's PoR select gains 'custom' with the
three fields (an empty object refuses on save).
- a new alpha content check reads the command's Alpha identifier (05/85,
Annex A coded) - the text check stays bound to the 8D Text string, so a
command carrying both keeps them distinct.
- a new sms content check asserts a SEND SHORT MESSAGE's submit TPDU:
DA / PID / DCS / UDL / UD (the parsed fields are logged and reported;
an applet's own SMS, not the OTA PoR the por check decodes).
- scp80.params.format wraps the C-APDU in the TS 102 226 5.2.1 Command
Scripting template (expanded = AA..., expanded-ae = AE 80...00 00); the
log shows WRAPPED=, the report C-APDU=<effective> format=<fmt>.
- docs: Worksheet 1 addresses an RFM TAR (B00000/B00001/B00010 compact,
B00120/B00140/B00130 expanded) with the own-TAR and MSL/spi1 notes, and
file-write is documented as a direct APDU that does not fire
EVENT_REMOTE_FILE_UPDATE.
Tests: 819 frontend + 724 Python; sw cache simple-v387.
Verifying a script from the log was impossible: the runner wrote no card
lines, SCP80's plaintext C-APDU / secured packet / PoR landed only in the
report, and a menu selection logged nothing (the interactive path showed just
"STATUS poll (menu-select 9000)" / "STATUS -> 9000").
Every step now writes a `TEST-RUN step N:` line family to stderr, request
before response:
- generic actions: the APDU/raw event data sent and the SW/RESP received
(`APDU TX=...`, `ENVELOPE(Event Download) ... data=...`, `READ/UPDATE ... -> SW=...`);
- SCP80: `C-APDU=` (or `SP=`), `SECURED=<hex> (N B) TAR=... SPI1=... SPI2=... CNTR=...`,
the response SW, and the PoR - `PoR[inline] status=... TAR=... CNTR=... raw=...`
plus `R-APDU SW=... data=...` (with the bad-format note);
- expectations: `FETCH=<apdu> -> SW=... <raw>`, `CMD 0x.. <NAME> qual=..`,
`TR=<apdu> -> SW=...`, and `PoR[sms-submit] ...` + `R-APDU` for the SEND
SHORT MESSAGE transport;
- status: `STATUS 1/N -> <sw>` per attempt;
- menu selection: `MENU-SELECT ENVELOPE=<apdu> item=<id> ('<text>') -> SW=...`
(both the runner action and /api/menu-select; the old STATUS lines stay as
context).
The shared secured-packet sender logs each segment's answer
(`OTA SEND: ENVELOPE i/N -> <SW>`), the scp80 step's report `sent` now carries
the C-APDU/SP hex, and `--apdu-trace` remains the raw transport view.
help EN/RU and docs/test-scripts.md gained the "reading the run log" note.
Tests: 816 frontend + 718 Python; sw cache simple-v385.
The events without a semantic builder (MT call, IMS registration, slices, ...)
are network-sourced, but the raw `envelope` action had no `src` override - the
only way to express them was the semantic set. `envelope` now accepts
`src` (82 terminal / 83 network) exactly like the `event` action; the step
editor exposes it and the authoring guide gets the row.
Also: the guide marks `por` as SCP80-only (the normaliser refuses it
elsewhere) and the semantic-events section names the shared src override.
Tests: 813 frontend + 717 Python; sw cache simple-v382.
The other-applet batch: a test script can send the common event downloads
semantically instead of raw hex.
- events.py: server-side mirrors of the PWA's event forms for Location status
(0x03), Access technology change (0x0B), Network rejection (0x12 - the
LA/RA/TA object selected by the registration group, the extended EMM cause
and the extended information object) and Data connection status change
(0x1D - status/type/TI plus the optional cause, host-clock 8.39 date-time,
location information, access technology, APN and PDP/PDN/PDU type). Fields
are validated before the run (a bad value is a script error, not a step
failure); `src` overrides the device-identities source (default terminal,
matching the Phone forms).
- The engine gains the `event` action kind; the runner builds and sends it.
The PWA's action-kind list stays in sync (drift-guarded - the guard itself
caught its own regex bug on the first run).
- Byte parity: the vectors are generated from the PWA's own builders and
pinned in tests/test_events.py; the frontend suites assert the same values.
PLMN and SCTS helpers are mirrored too.
- The Phone tab's event form shows the built "Event data (hex)" (updated as
the fields change), so every event without a builder can be used through
the raw `envelope` action.
- The test-step editor offers the event select + a JSON fields textarea;
malformed JSON refuses the save with a clear message.
- docs/test-scripts.md (the semantic-event table, an event example, the
format stamp), docs/api.md and help EN/RU updated.
Tests: 812 frontend + 717 Python; sw cache simple-v381.
The applet-testing batch agreed after v3.15/3.16:
- menu-select by text: the step names the item by `text` (+ `mode`
exact/contains, `case_sensitive`) instead of the install-dependent id
(both or neither is refused); the runner resolves it against the card's
cached menu and raises a step error naming the available items when nothing
(or several items) matches. The cache is refreshed on every SET UP MENU
fetch - the proactive chain and the expect step - so an applet install (new
items/ids after its REFRESH) no longer leaves a stale menu behind. The
step editor offers the id or the text + mode and the client-side pre-check
bounds them.
- TERMINAL RESPONSE object order: both builders emitted the Item identifier
before the Result (and the scripted builder its Text string before it too);
TS 102 223 6.8.0 mandates Command details, Device identities, Result,
Duration, Text string, Item identifier. `testscript.build_tr` and
`_menu_send_response` now follow it; `respond.raw` is documented as
appended after the standard objects, and the exact-byte tests pin the order.
- Text codings: the scripted response codes the GSM default alphabet via the
GSM 03.38 codec ('00' packed, '04' 8-bit) instead of latin-1, keeps '08'
UCS2 and sends the spec's null text string for an empty answer; the packing
helper is shared with the interactive path (`testscript.pack_gsm7`). A
UCS2 GET INPUT answer is documented and tested.
- docs/test-scripts.md gained the handoff brief for the applet agent: the
value-collection table, fill-in worksheets for the two applet scenarios, a
menu-by-text example, the validation checklist and a format stamp; help
EN/RU and docs/api.md updated.
Tests: 809 frontend + 705 Python; sw cache simple-v380.
The scripts lived in the browser's localStorage although only the local
server can run them. The new test_scripts.py store
(~/.pysim-simple-server/test_scripts.json, --test-scripts PATH) sits next to
the card presets: stable uuids and timestamps, atomic writes, and every
mutation is validated with the runner's own engine (the submitted shape is
kept - the normaliser's output is not re-normalisable: it fills defaults
like an 'any' PoR check that the check normaliser then rejects), so a stored
script cannot fail at run start for a validation reason. Import accepts the
old localStorage export as-is (export/import remains the migration path; the
PWA import also takes an exported array).
- /api/test/scripts (GET card-free: path/count + scripts), POST create,
/update, /delete and /import serve the store; the endpoints answer 503
without a store and 500 on a write failure, like the preset endpoints.
- /api/test/run takes a stored script_id (resolved when no inline script is
sent); the PWA sends the edited copy inline plus the id for the report,
and the run snapshot carries script_id.
- The PWA's Test script pill loads from the store, writes through on edits
(debounced name, immediate step/new/copy/delete), reports load/save/delete
failures inline, and exports the portable {name, steps} shape.
Tests: 808 frontend + 701 Python; sw cache simple-v379.
Three gaps blocked SCP80 applet testing from the PWA:
- testRunPreset() still marshalled the pre-v3.8 flat preset fields
(kic/kid/keys/counter/tar/spi1/spi2, all empty on a stored preset), so
every SCP80 run failed with "SCP80 preset is incomplete: no keyset is
defined". The PWA sends the matched preset's id now and the server
resolves it from the store (_test_run_preset_from_body; the inline
`preset` body stays for API callers), so a run always uses the stored
keysets, TARs and counters. Regression tests on both sides.
- testscript._normalise_params dropped the scp80 step's `kvn` (the editor
exposed it and the runner and validation consumed it, so scripts
silently used the preset's first keyset). kvn is validated (1-15) and
passed through; the client-side problem check bounds it too.
- The PoR delivered as a SEND SHORT MESSAGE (PoR-in-submit, SPI2 bit 0x20)
is decoded for the expect step that fetches it: the new `por` content
check asserts the response status / R-APDU SW / response data, decoded
with the preceding scp80 step's context (concatenated SMS accumulate
across expectations). The inline transport stays on the action
(check.por / check.data).
- The new `files` content check asserts the File List of a REFRESH
(TS 102 223 8.18, tag 12/92) - e.g. qualifier 00 = NAA initialization
with full file change notification - as an order-insensitive set of FID
paths.
The step editor exposes both checks; help EN/RU, docs/api.md and the new
authoring reference docs/test-scripts.md document the format. Tests: 803
frontend + 680 Python; sw cache simple-v378.
The ladder only advances on cntr_low; any other verdict stops the search.
A stop on a non-por_ok verdict after at least one cntr_low keeps the value
anyway - the earlier rejection proves it is above the card's counter - but
the response reports success: false with counter_saved, the verdict and the
saved counter ("something is likely wrong with the security settings");
the PWA shows it amber. Without a prior cntr_low nothing is saved, and a
missing PoR stays an error. actual_response_sms_submit/ussd count as
accepted.
Docs: docs/api.md, repo AGENTS. sw cache simple-v377.
Tests: 672 Python + 798 frontend green.
catarrh