DFU: String descriptors for DFU alt-interfaces

they are only shown in DFU mode for now, until we find a way to export
them over to the runtime.

.gitignore

@@ -7,7 +7,15 @@ cscope.out
 */__pycache__
 *.E
 *.pyc
-sam3s_example/mains/zwizwa_ccid.c
-Baselibc
-venv
 tags
+*.hobj
+*.o
+*.a
+*.lst
+*.map
+*.elf
+*.size
+*.bin
+*.p
+host/simtrace2-remsim
+host/simtrace2-remsim-usb2udp

firmware/Makefile

@@ -34,49 +34,34 @@
 
 # Chip & board used for compilation
 # (can be overriden by adding CHIP=chip and BOARD=board to the command-line)
-CHIP  = sam3s2
-BOARD = simtrace
+CHIP  ?= sam3s4
+BOARD ?= qmod
 
 # Defines which are the available memory targets for the SAM3S-EK board.
-MEMORIES = flash
-
-# Trace level used for compilation
-# (can be overriden by adding TRACE_LEVEL=#number to the command-line)
-# TRACE_LEVEL_DEBUG      5
-# TRACE_LEVEL_INFO       4
-# TRACE_LEVEL_WARNING    3
-# TRACE_LEVEL_ERROR      2
-# TRACE_LEVEL_FATAL      1
-# TRACE_LEVEL_NO_TRACE   0
-TRACE_LEVEL = 1
-#FIXME: Remove this variable
-NOAUTOCALLBACK=no
-
-DEBUG_PHONE_SNIFF=0
-
-#CFLAGS+=-DUSB_NO_DEBUG=1
-
-# Optimization level, put in comment for debugging
-OPTIMIZATION = -O0
+MEMORIES ?= flash dfu
 
 # Output file basename
-OUTPUT = project
+APP ?= dfu
 
 # Output directories
+OUTPUT = $(BOARD)-$(APP)
 BIN = bin
-OBJ = obj
+OBJ = obj/$(BOARD)
 
 #-------------------------------------------------------------------------------
 #		Tools
 #-------------------------------------------------------------------------------
 
-AT91LIB_USB_COMMON_CORE_PATH = atmel_softpack_libraries/usb/common/core
-AT91LIB_USB_CORE_PATH = atmel_softpack_libraries/usb/device/core
+AT91LIB = ./atmel_softpack_libraries
+
+AT91LIB_USB_COMMON_CORE_PATH = $(AT91LIB)/usb/common/core
+AT91LIB_USB_CORE_PATH = $(AT91LIB)/usb/device/core
+AT91LIB_USB_DFU_PATH = $(AT91LIB)/usb/device/dfu
 
 # Tool suffix when cross-compiling
 CROSS_COMPILE = arm-none-eabi-
 
-LIBS = -Wl,--start-group -lgcc -lc -Wl,--end-group
+LIBS = -Wl,--start-group -lgcc -Wl,--end-group -nostdlib
 
 # Compilation tools
 CC = $(CROSS_COMPILE)gcc
@@ -87,12 +72,73 @@ OBJCOPY = $(CROSS_COMPILE)objcopy
 GDB = $(CROSS_COMPILE)gdb
 NM = $(CROSS_COMPILE)nm
 
-# Flags
-INCLUDES_USB = -Iatmel_softpack_libraries/usb/include
+TOP=..
+GIT_VERSION=$(shell $(TOP)/git-version-gen $(TOP)/.tarvers)
 
-INCLUDES  = -Iinclude_board -Iinclude_sam3s -Iinclude -Isrc_simtrace
-INCLUDES += -Icmsis
-INCLUDES += $(INCLUDES_USB)
+#-------------------------------------------------------------------------------
+#		Files
+#-------------------------------------------------------------------------------
+
+# Directories where source files can be found
+
+USB_PATHS = $(AT91LIB_USB_CORE_PATH) $(AT91LIB_USB_DFU_PATH) $(AT91LIB_USB_COMMON_CORE_PATH)
+
+VPATH += $(USB_PATHS)
+VPATH += $(AT91LIB)/libchip_sam3s/source/ $(AT91LIB)/libchip_sam3s/cmsis
+VPATH += libboard/common/source libboard/$(BOARD)/source
+VPATH += libcommon/source
+VPATH += libosmocore/source 
+VPATH += apps/$(APP)
+
+# Objects built from C source files
+C_OSMOCORE = $(notdir $(wildcard libosmocore/source/*.c))
+C_LIBCHIP  = $(notdir $(wildcard $(AT91LIB)/libchip_sam3s/source/*.c) $(wildcard $(AT91LIB)/libchip_sam3s/cmsis/*.c))
+
+C_LIBUSB     = USBDescriptors.c USBRequests.c USBD.c USBDCallbacks.c USBDDriver.c USBDDriverCallbacks.c
+C_LIBUSB_RT  = dfu.c dfu_desc.c dfu_runtime.c
+C_LIBUSB_DFU = dfu.c dfu_desc.c dfu_driver.c
+C_LIBCOMMON  = string.c stdio.c fputs.c req_ctx.c ringbuffer.c
+
+C_BOARD      = $(notdir $(wildcard libboard/common/source/*.c))
+C_BOARD	    += $(notdir $(wildcard libboard/$(BOARD)/source/*.c))
+
+C_APPLEVEL = $(notdir $(wildcard apps/$(APP)/*.c))
+
+C_FILES  = $(C_OSMOCORE) $(C_LIBCHIP) $(C_LIBUSB) $(C_LIBCOMMON) $(C_BOARD) $(C_APPLEVEL)
+
+-include apps/$(APP)/Makefile
+
+C_OBJECTS  = $(C_FILES:%.c=%.o)
+
+# Trace level used for compilation
+# (can be overriden by adding TRACE_LEVEL=#number to the command-line)
+# TRACE_LEVEL_DEBUG      5
+# TRACE_LEVEL_INFO       4
+# TRACE_LEVEL_WARNING    3
+# TRACE_LEVEL_ERROR      2
+# TRACE_LEVEL_FATAL      1
+# TRACE_LEVEL_NO_TRACE   0
+TRACE_LEVEL ?= 4
+
+DEBUG_PHONE_SNIFF?=0
+
+#CFLAGS+=-DUSB_NO_DEBUG=1
+
+# Optimization level, put in comment for debugging
+OPTIMIZATION ?= -Os
+
+
+
+# Flags
+INCLUDES_USB = -I$(AT91LIB)/usb/include -I$(AT91LIB)
+
+INCLUDES = $(INCLUDES_USB)
+INCLUDES += -I$(AT91LIB)/libchip_sam3s -I$(AT91LIB)/libchip_sam3s/include
+INCLUDES += -I$(AT91LIB)/libchip_sam3s/cmsis
+INCLUDES += -Ilibboard/common/include -Ilibboard/$(BOARD)/include
+INCLUDES += -Ilibcommon/include
+INCLUDES += -Ilibosmocore/include
+INCLUDES += -Isrc_simtrace -Iinclude
 
 CFLAGS += -Wall -Wchar-subscripts -Wcomment -Wimplicit-int #-Wformat=2
 CFLAGS += -Werror-implicit-function-declaration -Wmain -Wparentheses
@@ -105,42 +151,26 @@ CFLAGS += -Wmissing-format-attribute -Wno-deprecated-declarations
 CFLAGS += #-Wpacked
 CFLAGS += -Wredundant-decls -Wnested-externs -Winline #-Wlong-long
 CFLAGS += -Wunreachable-code
-CFLAGS += -Wcast-align
-CFLAGS += -std=c11
+#CFLAGS += -Wcast-align
+#CFLAGS += -std=c11
 CFLAGS += -Wmissing-noreturn
 #CFLAGS += -Wconversion
 CFLAGS += -Wno-unused-but-set-variable -Wno-unused-variable
 CFLAGS += -Wno-suggest-attribute=noreturn
 
-# To reduce application size use only integer printf function.
-CFLAGS += -Dprintf=iprintf
-
 # -mlong-calls  -Wall
 #CFLAGS += -save-temps -fverbose-asm
 #CFLAGS += -Wa,-a,-ad
+CFLAGS += -D__ARM
 CFLAGS += --param max-inline-insns-single=500 -mcpu=cortex-m3 -mthumb # -mfix-cortex-m3-ldrd
 CFLAGS += -ffunction-sections -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -DTRACE_LEVEL=$(TRACE_LEVEL) -DDEBUG_PHONE_SNIFF=$(DEBUG_PHONE_SNIFF)
+CFLAGS += -DGIT_VERSION=\"$(GIT_VERSION)\"
+CFLAGS += -DBOARD=\"$(BOARD)\" -DBOARD_$(BOARD)
+CFLAGS += -DAPPLICATION=\"$(APP)\" -DAPPLICATION_$(APP)
 ASFLAGS = -mcpu=cortex-m3 -mthumb -Wall -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -D__ASSEMBLY__
 LDFLAGS = -mcpu=cortex-m3 -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=ResetException -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--warn-unresolved-symbols $(LIB)
 #LD_OPTIONAL=-Wl,--print-gc-sections -Wl,--stats
 
-#-------------------------------------------------------------------------------
-#		Files
-#-------------------------------------------------------------------------------
-
-# Directories where source files can be found
-
-USB_PATHS = $(AT91LIB_USB_CORE_PATH) $(AT91LIB_USB_COMMON_CORE_PATH)
-VPATH += src_board src_sam3s cmsis $(USB_PATHS) src_simtrace
-
-# Objects built from C source files
-C_CMSIS    = core_cm3.o
-C_LOWLEVEL = board_cstartup_gnu.o board_lowlevel.o syscalls.o exceptions.o
-C_LIBLEVEL = spi.o pio.o pmc.o usart.o pio_it.o pio_capture.o uart_console.o iso7816_4.o wdt.o led.o tc.o
-C_CCID = cciddriver.o USBD.o USBDDriver.o USBD_HAL.o USBRequests.o USBDCallbacks.o USBDescriptors.o USBDDriverCallbacks.o
-C_SIMTRACE = simtrace_iso7816.o usb.o ccid.o sniffer.o phone.o mitm.o ringbuffer.o host_communication.o #iso7816_uart.o
-C_APPLEVEL = main.o
-C_OBJECTS  = $(C_CMSIS) $(C_LOWLEVEL) $(C_LIBLEVEL) $(C_APPLEVEL) $(C_CCID) $(C_SIMTRACE)
 
 # Append OBJ and BIN directories to output filename
 OUTPUT := $(BIN)/$(OUTPUT)
@@ -159,18 +189,18 @@ C_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(C_OBJECTS))
 ASM_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(ASM_OBJECTS))
 
 $(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1))
-	@$(CC) $(LDFLAGS) $(LD_OPTIONAL) -T"$$@.ld" -Wl,-Map,$(OUTPUT)-$$@.map -o $(OUTPUT)-$$@.elf $$^ $(LIBS)
+	@$(CC) $(LDFLAGS) $(LD_OPTIONAL) -T"libboard/common/resources/$(CHIP)/$$@.ld" -Wl,-Map,$(OUTPUT)-$$@.map -o $(OUTPUT)-$$@.elf $$^ $(LIBS)
 	@$(NM) $(OUTPUT)-$$@.elf >$(OUTPUT)-$$@.elf.txt
 	@$(OBJCOPY) -O binary $(OUTPUT)-$$@.elf $(OUTPUT)-$$@.bin
 	@$(SIZE) $$^ $(OUTPUT)-$$@.elf
 
 $$(C_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.c Makefile $(OBJ) $(BIN)
 	@echo [COMPILING $$<]
-	@$(CC) $(CFLAGS) -D$(1) -Wa,-ahlms=$(BIN)/$$*.lst -c -o $$@ $$< 
+	@$(CC) $(CFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -Wa,-ahlms=$(BIN)/$$*.lst -c -o $$@ $$<
 
 $$(ASM_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.S Makefile $(OBJ) $(BIN)
 	@echo [ASSEMBLING $$@]
-	@$(CC) $(ASFLAGS) -D$(1) -c -o $$@ $$<
+	@$(CC) $(ASFLAGS) -DENVIRONMENT_$(1) -DENVIRONMENT=\"$(1)\" -c -o $$@ $$<
 
 debug_$(1): $(1)
 	$(GDB) -x "$(BOARD_LIB)/resources/gcc/$(BOARD)_$(1).gdb" -ex "reset" -readnow -se $(OUTPUT)-$(1).elf
@@ -188,6 +218,3 @@ log:
 
 clean:
 	-rm -fR $(OBJ)/*.o $(BIN)/*.bin $(BIN)/*.elf $(BIN)/*.elf.txt $(BIN)/*.map $(BIN)/*.lst
-
-rmbak: 
-	-rm *~ $(BIN)/*~

firmware/README.txt

@@ -0,0 +1,33 @@
+
+== BOARDS
+
+A board defines a given circuit board, i.e. SIMtrace, OWHW, QMOD
+
+It defines the given hardware model for which the program is to be
+compiled.
+
+Current boards supported are:
+* simtrace: The good old Osmocom SIMtrace PCB with SAM3 instead of
+  SAM7, open hardware.
+* qmod: A sysmocom-proprietary quad mPCIe carrier board, publicly available
+* owhw: An undisclosed sysmocom-internal board, not publicly available
+
+== APPLICATIONS
+
+An application is a specific piece of software with given
+functionality.
+
+== ENVIRONMENTS
+
+An environment is a runtime environment, typically defined by a linker
+script.  The current runtime environments include
+* flash: Run natively from start of flash memory
+* dfu: Run after a DFU bootloader from an offset after the first 16k
+  of flash (the first 16k are reserved for the bootloader)
+* ram: Run from within the RAM of the chip, downloaded via JTAG/SWD
+
+
+== Building
+
+A given software build is made for a specific combination of an APP
+running in a certain ENVIRONMENT on a given BOARD.

firmware/apps/cardem/Makefile

@@ -0,0 +1,3 @@
+C_FILES += $(C_LIBUSB_RT)
+
+C_FILES += card_emu.c ccid.c host_communication.c iso7816_4.c iso7816_fidi.c mitm.c mode_cardemu.c simtrace_iso7816.c sniffer.c tc_etu.c usb.c

firmware/apps/cardem/main.c

@@ -0,0 +1,207 @@
+// FIXME: Copyright license here
+/*------------------------------------------------------------------------------
+ *          Headers
+ *------------------------------------------------------------------------------*/
+
+#include "board.h"
+#include "simtrace.h"
+#include "utils.h"
+#include "req_ctx.h"
+#include "osmocom/core/timer.h"
+
+unsigned int g_unique_id[4];
+
+/*------------------------------------------------------------------------------
+ *         Internal variables
+ *------------------------------------------------------------------------------*/
+typedef struct {
+	/* static initialization, called whether or not the usb config is active */
+	void (*configure) (void);
+	/* initialization function after the config was selected */
+	void (*init) (void);
+	/* de-initialization before selecting new config */
+	void (*exit) (void);
+	/* main loop content for given configuration */
+	void (*run) (void);
+	/* Interrupt handler for USART1 */
+	void (*usart0_irq) (void);
+	/* Interrupt handler for USART1 */
+	void (*usart1_irq) (void);
+} conf_func;
+
+static const conf_func config_func_ptrs[] = {
+	/* array slot 0 is empty, usb configs start at 1 */
+#ifdef HAVE_SNIFFER
+	[CFG_NUM_SNIFF] = {
+		.configure = Sniffer_configure,
+		.init = Sniffer_init,
+		.exit = Sniffer_exit,
+		.run = Sniffer_run,
+	},
+#endif
+#ifdef HAVE_CCID
+	[CFG_NUM_CCID] = {
+		.configure = CCID_configure,
+		.init = CCID_init,
+		.exit = CCID_exit,
+		.run = CCID_run,
+	},
+#endif
+#ifdef HAVE_CARDEM
+	[CFG_NUM_PHONE] = {
+		.configure = mode_cardemu_configure,
+		.init = mode_cardemu_init,
+		.exit = mode_cardemu_exit,
+		.run = mode_cardemu_run,
+		.usart0_irq = mode_cardemu_usart0_irq,
+		.usart1_irq = mode_cardemu_usart1_irq,
+	},
+#endif
+#ifdef HAVE_MITM
+	[CFG_NUM_MITM] = {
+		.configure = MITM_configure,
+		.init = MITM_init,
+		.exit = MITM_exit,
+		.run = MITM_run,
+	},
+#endif
+};
+
+/*------------------------------------------------------------------------------
+ *         Internal variables
+ *------------------------------------------------------------------------------*/
+#if defined(HAVE_SNIFFER)
+static volatile enum confNum simtrace_config = CFG_NUM_SNIFF;
+#elif defined(HAVE_CARDEM)
+static volatile enum confNum simtrace_config = CFG_NUM_PHONE;
+#elif defined(HAVE_CCID)
+static volatile enum confNum simtrace_config = CFG_NUM_CCID;
+#endif
+
+/*----------------------------------------------------------------------------
+ *       Callbacks
+ *----------------------------------------------------------------------------*/
+
+void USBDDriverCallbacks_ConfigurationChanged(uint8_t cfgnum)
+{
+	TRACE_INFO_WP("cfgChanged%d ", cfgnum);
+	simtrace_config = cfgnum;
+}
+
+void USART1_IrqHandler(void)
+{
+	config_func_ptrs[simtrace_config].usart1_irq();
+}
+
+void USART0_IrqHandler(void)
+{
+	config_func_ptrs[simtrace_config].usart0_irq();
+}
+
+/* returns '1' in case we should break any endless loop */
+static void check_exec_dbg_cmd(void)
+{
+	int ch;
+
+	if (!UART_IsRxReady())
+		return;
+
+	ch = UART_GetChar();
+
+	board_exec_dbg_cmd(ch);
+}
+
+/*------------------------------------------------------------------------------
+ *        Main
+ *------------------------------------------------------------------------------*/
+#define MAX_USB_ITER BOARD_MCK/72	// This should be around a second
+extern int main(void)
+{
+	uint8_t isUsbConnected = 0;
+	enum confNum last_simtrace_config = simtrace_config;
+	unsigned int i = 0;
+
+	LED_Configure(LED_NUM_RED);
+	LED_Configure(LED_NUM_GREEN);
+	LED_Set(LED_NUM_RED);
+
+	/* Disable watchdog */
+	WDT_Disable(WDT);
+
+	req_ctx_init();
+
+	PIO_InitializeInterrupts(0);
+
+	EEFC_ReadUniqueID(g_unique_id);
+
+        printf("\r\n\r\n"
+		"=============================================================================\r\n"
+		"SIMtrace2 firmware " GIT_VERSION " (C) 2010-2016 by Harald Welte\r\n"
+		"=============================================================================\r\n");
+
+	TRACE_INFO("Serial Nr. %08x-%08x-%08x-%08x\r\n",
+		   g_unique_id[0], g_unique_id[1],
+		   g_unique_id[2], g_unique_id[3]);
+
+	board_main_top();
+
+	TRACE_INFO("USB init...\r\n");
+	SIMtrace_USB_Initialize();
+
+	while (USBD_GetState() < USBD_STATE_CONFIGURED) {
+		check_exec_dbg_cmd();
+#if 0
+		if (i >= MAX_USB_ITER * 3) {
+			TRACE_ERROR("Resetting board (USB could "
+				    "not be configured)\r\n");
+			NVIC_SystemReset();
+		}
+#endif
+		i++;
+	}
+
+	TRACE_INFO("calling configure of all configurations...\r\n");
+	for (i = 1; i < sizeof(config_func_ptrs) / sizeof(config_func_ptrs[0]);
+	     ++i) {
+		if (config_func_ptrs[i].configure)
+			config_func_ptrs[i].configure();
+	}
+
+	TRACE_INFO("calling init of config %u...\r\n", simtrace_config);
+	config_func_ptrs[simtrace_config].init();
+	last_simtrace_config = simtrace_config;
+
+	TRACE_INFO("entering main loop...\r\n");
+	while (1) {
+#if TRACE_LEVEL >= TRACE_LEVEL_DEBUG
+		const char rotor[] = { '-', '\\', '|', '/' };
+		putchar('\b');
+		putchar(rotor[i++ % ARRAY_SIZE(rotor)]);
+#endif
+		check_exec_dbg_cmd();
+		osmo_timers_prepare();
+		osmo_timers_update();
+
+		if (USBD_GetState() < USBD_STATE_CONFIGURED) {
+
+			if (isUsbConnected) {
+				isUsbConnected = 0;
+			}
+		} else if (isUsbConnected == 0) {
+			TRACE_INFO("USB is now configured\r\n");
+			LED_Set(LED_NUM_GREEN);
+			LED_Clear(LED_NUM_RED);
+
+			isUsbConnected = 1;
+		}
+		if (last_simtrace_config != simtrace_config) {
+			TRACE_INFO("USB config chg %u -> %u\r\n",
+				   last_simtrace_config, simtrace_config);
+			config_func_ptrs[last_simtrace_config].exit();
+			config_func_ptrs[simtrace_config].init();
+			last_simtrace_config = simtrace_config;
+		} else {
+			config_func_ptrs[simtrace_config].run();
+		}
+	}
+}

firmware/apps/dfu/Makefile

@@ -0,0 +1,12 @@
+
+C_FILES += $(C_LIBUSB_DFU)
+
+# Trace level used for compilation
+# (can be overriden by adding TRACE_LEVEL=#number to the command-line)
+# TRACE_LEVEL_DEBUG      5
+# TRACE_LEVEL_INFO       4
+# TRACE_LEVEL_WARNING    3
+# TRACE_LEVEL_ERROR      2
+# TRACE_LEVEL_FATAL      1
+# TRACE_LEVEL_NO_TRACE   0
+TRACE_LEVEL ?= 3

firmware/apps/dfu/main.c

@@ -0,0 +1,195 @@
+#include "board.h"
+#include "utils.h"
+#include "usb/device/dfu/dfu.h"
+#include "usb/common/dfu/usb_dfu.h"
+#include "manifest.h"
+
+#define ALTIF_RAM 0
+#define ALTIF_FLASH 1
+
+unsigned int g_unique_id[4];
+
+/*----------------------------------------------------------------------------
+ *       Callbacks
+ *----------------------------------------------------------------------------*/
+
+#define RAM_ADDR(offset) (IRAM_ADDR + BOARD_DFU_RAM_SIZE + offset)
+#define FLASH_ADDR(offset) (IFLASH_ADDR + BOARD_DFU_BOOT_SIZE + offset)
+
+#define IFLASH_END	((uint8_t *)IFLASH_ADDR + IFLASH_SIZE)
+#define IRAM_END	((uint8_t *)IRAM_ADDR + IRAM_SIZE)
+
+/* incoming call-back: Host has transfered 'len' bytes (stored at
+ * 'data'), which we shall write to 'offset' into the partition
+ * associated with 'altif'.  Guaranted to be les than
+ * BOARD_DFU_PAGE_SIZE */
+int USBDFU_handle_dnload(uint8_t altif, unsigned int offset,
+			 uint8_t *data, unsigned int len)
+{
+	uint32_t addr;
+	int rc;
+
+	printf("dnload(altif=%u, offset=%u, len=%u)\n\r", altif, offset, len);
+
+	switch (altif) {
+	case ALTIF_RAM:
+		addr = RAM_ADDR(offset);
+		if (addr > IRAM_ADDR + IRAM_SIZE) {
+			g_dfu->state = DFU_STATE_dfuERROR;
+			g_dfu->status = DFU_STATUS_errADDRESS;
+			return DFU_RET_STALL;
+		}
+		memcpy((void *)addr, data, len);
+		return DFU_RET_ZLP;
+	case ALTIF_FLASH:
+		addr = FLASH_ADDR(offset);
+		if (addr > IFLASH_ADDR + IFLASH_SIZE) {
+			g_dfu->state = DFU_STATE_dfuERROR;
+			g_dfu->status = DFU_STATUS_errADDRESS;
+			return DFU_RET_STALL;
+		}
+		rc = FLASHD_Write(addr, data, len);
+		if (rc != 0) {
+			/* FIXME: set error codes */
+			return DFU_RET_STALL;
+		}
+		return DFU_RET_ZLP;
+	default:
+		/* FIXME: set error codes */
+		TRACE_ERROR("DFU download for unknown AltIf %d\n\r", altif);
+		return DFU_RET_STALL;
+	}
+}
+
+/* incoming call-back: Host has requested to read back 'req_len' bytes
+ * starting from 'offset' of the firmware * associated with partition
+ * 'altif' */
+int USBDFU_handle_upload(uint8_t altif, unsigned int offset,
+			 uint8_t *data, unsigned int req_len)
+{
+	uint32_t addr;
+
+	printf("upload(altif=%u, offset=%u, len=%u)", altif, offset, req_len);
+
+	switch (altif) {
+	case ALTIF_RAM:
+		addr = RAM_ADDR(offset);
+		if (addr > IRAM_ADDR + IRAM_SIZE) {
+			g_dfu->state = DFU_STATE_dfuERROR;
+			g_dfu->status = DFU_STATUS_errADDRESS;
+			return -1;
+		}
+		if ((uint8_t *)addr + req_len > IRAM_END)
+			req_len = IRAM_END - (uint8_t *)addr;
+		memcpy(data, (void *)addr, req_len);
+		break;
+	case ALTIF_FLASH:
+		addr = FLASH_ADDR(offset);
+		if (addr > IFLASH_ADDR + IFLASH_SIZE) {
+			g_dfu->state = DFU_STATE_dfuERROR;
+			g_dfu->status = DFU_STATUS_errADDRESS;
+			return -1;
+		}
+		if ((uint8_t *)addr + req_len > IFLASH_END)
+			req_len = IFLASH_END - (uint8_t *)addr;
+		memcpy(data, (void *)addr, req_len);
+		break;
+	default:
+		TRACE_ERROR("DFU upload for unknown AltIf %d\n\r", altif);
+		/* FIXME: set error codes */
+		return -1;
+	}
+	printf("=%u\r\n", req_len);
+	return req_len;
+}
+
+
+/* returns '1' in case we should break any endless loop */
+static void check_exec_dbg_cmd(void)
+{
+	int ch;
+
+	if (!UART_IsRxReady())
+		return;
+
+	ch = UART_GetChar();
+
+	//board_exec_dbg_cmd(ch);
+}
+
+/*------------------------------------------------------------------------------
+ *        Main
+ *------------------------------------------------------------------------------*/
+#define MAX_USB_ITER BOARD_MCK/72	// This should be around a second
+extern int main(void)
+{
+	uint8_t isUsbConnected = 0;
+	unsigned int i = 0;
+
+	LED_Configure(LED_NUM_RED);
+	LED_Configure(LED_NUM_GREEN);
+	LED_Set(LED_NUM_RED);
+
+	/* Disable watchdog */
+	WDT_Disable(WDT);
+
+	//req_ctx_init();
+
+	PIO_InitializeInterrupts(0);
+
+	EEFC_ReadUniqueID(g_unique_id);
+
+        printf("\r\n\r\n"
+		"=============================================================================\r\n"
+		"DFU bootloader %s for board %s (C) 2010-2017 by Harald Welte\r\n"
+		"=============================================================================\r\n",
+		manifest_revision, manifest_board);
+
+	TRACE_INFO("Chip ID: 0x%08x (Ext 0x%08x)\r\n", CHIPID->CHIPID_CIDR, CHIPID->CHIPID_EXID);
+	TRACE_INFO("Serial Nr. %08x-%08x-%08x-%08x\r\n",
+		   g_unique_id[0], g_unique_id[1],
+		   g_unique_id[2], g_unique_id[3]);
+
+	//board_main_top();
+
+	TRACE_INFO("USB init...\r\n");
+	USBDFU_Initialize(&dfu_descriptors);
+
+	while (USBD_GetState() < USBD_STATE_CONFIGURED) {
+		check_exec_dbg_cmd();
+#if 1
+		if (i >= MAX_USB_ITER * 3) {
+			TRACE_ERROR("Resetting board (USB could "
+				    "not be configured)\r\n");
+			NVIC_SystemReset();
+		}
+#endif
+		i++;
+	}
+
+	FLASHD_Initialize(BOARD_MCK, 1);
+	TRACE_INFO("entering main loop...\r\n");
+	while (1) {
+#if TRACE_LEVEL >= TRACE_LEVEL_DEBUG
+		const char rotor[] = { '-', '\\', '|', '/' };
+		putchar('\b');
+		putchar(rotor[i++ % ARRAY_SIZE(rotor)]);
+#endif
+		check_exec_dbg_cmd();
+		//osmo_timers_prepare();
+		//osmo_timers_update();
+
+		if (USBD_GetState() < USBD_STATE_CONFIGURED) {
+
+			if (isUsbConnected) {
+				isUsbConnected = 0;
+			}
+		} else if (isUsbConnected == 0) {
+			TRACE_INFO("USB is now configured\r\n");
+			LED_Set(LED_NUM_GREEN);
+			LED_Clear(LED_NUM_RED);
+
+			isUsbConnected = 1;
+		}
+	}
+}

firmware/apps/triple_play/Makefile

@@ -0,0 +1,3 @@
+C_FILES += $(C_LIBUSB_RT)
+
+C_FILES += card_emu.c ccid.c host_communication.c iso7816_4.c iso7816_fidi.c mitm.c mode_cardemu.c simtrace_iso7816.c sniffer.c tc_etu.c usb.c

firmware/apps/triple_play/main.c

@@ -0,0 +1,207 @@
+// FIXME: Copyright license here
+/*------------------------------------------------------------------------------
+ *          Headers
+ *------------------------------------------------------------------------------*/
+
+#include "board.h"
+#include "simtrace.h"
+#include "utils.h"
+#include "req_ctx.h"
+#include "osmocom/core/timer.h"
+
+unsigned int g_unique_id[4];
+
+/*------------------------------------------------------------------------------
+ *         Internal variables
+ *------------------------------------------------------------------------------*/
+typedef struct {
+	/* static initialization, called whether or not the usb config is active */
+	void (*configure) (void);
+	/* initialization function after the config was selected */
+	void (*init) (void);
+	/* de-initialization before selecting new config */
+	void (*exit) (void);
+	/* main loop content for given configuration */
+	void (*run) (void);
+	/* Interrupt handler for USART1 */
+	void (*usart0_irq) (void);
+	/* Interrupt handler for USART1 */
+	void (*usart1_irq) (void);
+} conf_func;
+
+static const conf_func config_func_ptrs[] = {
+	/* array slot 0 is empty, usb configs start at 1 */
+#ifdef HAVE_SNIFFER
+	[CFG_NUM_SNIFF] = {
+		.configure = Sniffer_configure,
+		.init = Sniffer_init,
+		.exit = Sniffer_exit,
+		.run = Sniffer_run,
+	},
+#endif
+#ifdef HAVE_CCID
+	[CFG_NUM_CCID] = {
+		.configure = CCID_configure,
+		.init = CCID_init,
+		.exit = CCID_exit,
+		.run = CCID_run,
+	},
+#endif
+#ifdef HAVE_CARDEM
+	[CFG_NUM_PHONE] = {
+		.configure = mode_cardemu_configure,
+		.init = mode_cardemu_init,
+		.exit = mode_cardemu_exit,
+		.run = mode_cardemu_run,
+		.usart0_irq = mode_cardemu_usart0_irq,
+		.usart1_irq = mode_cardemu_usart1_irq,
+	},
+#endif
+#ifdef HAVE_MITM
+	[CFG_NUM_MITM] = {
+		.configure = MITM_configure,
+		.init = MITM_init,
+		.exit = MITM_exit,
+		.run = MITM_run,
+	},
+#endif
+};
+
+/*------------------------------------------------------------------------------
+ *         Internal variables
+ *------------------------------------------------------------------------------*/
+#if defined(HAVE_SNIFFER)
+static volatile enum confNum simtrace_config = CFG_NUM_SNIFF;
+#elif defined(HAVE_CARDEM)
+static volatile enum confNum simtrace_config = CFG_NUM_PHONE;
+#elif defined(HAVE_CCID)
+static volatile enum confNum simtrace_config = CFG_NUM_CCID;
+#endif
+
+/*----------------------------------------------------------------------------
+ *       Callbacks
+ *----------------------------------------------------------------------------*/
+
+void USBDDriverCallbacks_ConfigurationChanged(uint8_t cfgnum)
+{
+	TRACE_INFO_WP("cfgChanged%d ", cfgnum);
+	simtrace_config = cfgnum;
+}
+
+void USART1_IrqHandler(void)
+{
+	config_func_ptrs[simtrace_config].usart1_irq();
+}
+
+void USART0_IrqHandler(void)
+{
+	config_func_ptrs[simtrace_config].usart0_irq();
+}
+
+/* returns '1' in case we should break any endless loop */
+static void check_exec_dbg_cmd(void)
+{
+	int ch;
+
+	if (!UART_IsRxReady())
+		return;
+
+	ch = UART_GetChar();
+
+	board_exec_dbg_cmd(ch);
+}
+
+/*------------------------------------------------------------------------------
+ *        Main
+ *------------------------------------------------------------------------------*/
+#define MAX_USB_ITER BOARD_MCK/72	// This should be around a second
+extern int main(void)
+{
+	uint8_t isUsbConnected = 0;
+	enum confNum last_simtrace_config = simtrace_config;
+	unsigned int i = 0;
+
+	LED_Configure(LED_NUM_RED);
+	LED_Configure(LED_NUM_GREEN);
+	LED_Set(LED_NUM_RED);
+
+	/* Disable watchdog */
+	WDT_Disable(WDT);
+
+	req_ctx_init();
+
+	PIO_InitializeInterrupts(0);
+
+	EEFC_ReadUniqueID(g_unique_id);
+
+        printf("\r\n\r\n"
+		"=============================================================================\r\n"
+		"SIMtrace2 firmware " GIT_REVISION " (C) 2010-2017 by Harald Welte\r\n"
+		"=============================================================================\r\n");
+
+	TRACE_INFO("Serial Nr. %08x-%08x-%08x-%08x\r\n",
+		   g_unique_id[0], g_unique_id[1],
+		   g_unique_id[2], g_unique_id[3]);
+
+	board_main_top();
+
+	TRACE_INFO("USB init...\r\n");
+	SIMtrace_USB_Initialize();
+
+	while (USBD_GetState() < USBD_STATE_CONFIGURED) {
+		check_exec_dbg_cmd();
+#if 0
+		if (i >= MAX_USB_ITER * 3) {
+			TRACE_ERROR("Resetting board (USB could "
+				    "not be configured)\r\n");
+			NVIC_SystemReset();
+		}
+#endif
+		i++;
+	}
+
+	TRACE_INFO("calling configure of all configurations...\r\n");
+	for (i = 1; i < sizeof(config_func_ptrs) / sizeof(config_func_ptrs[0]);
+	     ++i) {
+		if (config_func_ptrs[i].configure)
+			config_func_ptrs[i].configure();
+	}
+
+	TRACE_INFO("calling init of config %u...\r\n", simtrace_config);
+	config_func_ptrs[simtrace_config].init();
+	last_simtrace_config = simtrace_config;
+
+	TRACE_INFO("entering main loop...\r\n");
+	while (1) {
+#if TRACE_LEVEL >= TRACE_LEVEL_DEBUG
+		const char rotor[] = { '-', '\\', '|', '/' };
+		putchar('\b');
+		putchar(rotor[i++ % ARRAY_SIZE(rotor)]);
+#endif
+		check_exec_dbg_cmd();
+		osmo_timers_prepare();
+		osmo_timers_update();
+
+		if (USBD_GetState() < USBD_STATE_CONFIGURED) {
+
+			if (isUsbConnected) {
+				isUsbConnected = 0;
+			}
+		} else if (isUsbConnected == 0) {
+			TRACE_INFO("USB is now configured\r\n");
+			LED_Set(LED_NUM_GREEN);
+			LED_Clear(LED_NUM_RED);
+
+			isUsbConnected = 1;
+		}
+		if (last_simtrace_config != simtrace_config) {
+			TRACE_INFO("USB config chg %u -> %u\r\n",
+				   last_simtrace_config, simtrace_config);
+			config_func_ptrs[last_simtrace_config].exit();
+			config_func_ptrs[simtrace_config].init();
+			last_simtrace_config = simtrace_config;
+		} else {
+			config_func_ptrs[simtrace_config].run();
+		}
+	}
+}

firmware/atmel_softpack_libraries/libchip_sam3s/chip.h

@@ -52,5 +52,8 @@
 
 #include "trace.h"
 #include "wdt.h"
+#include "unique_id.h"
+#include "efc.h"
+#include "flashd.h"
 
 #endif /* _LIB_SAM3S_ */

firmware/atmel_softpack_libraries/libchip_sam3s/include/efc.h

@@ -0,0 +1,113 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/**
+ * \file
+ *
+ * \section Purpose
+ *
+ * Interface for configuration the Enhanced Embedded Flash Controller (EEFC) peripheral.
+ *
+ * \section Usage
+ *
+ * -# Enable/disable %flash ready interrupt sources using EFC_EnableFrdyIt()
+ *    and EFC_DisableFrdyIt().
+ * -# Translates the given address into which EEFC, page and offset values
+ *    for difference density %flash memory using EFC_TranslateAddress().
+ * -# Computes the address of a %flash access given the EFC, page and offset
+ *    for difference density %flash memory using EFC_ComputeAddress().
+ * -# Start the executing command with EFC_StartCommand()
+ * -# Retrieve the current status of the EFC using EFC_GetStatus().
+ * -# Retrieve the result of the last executed command with EFC_GetResult().
+ */
+
+#ifndef _EEFC_
+#define _EEFC_
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+#include "chip.h"
+
+#include <stdint.h>
+
+/*----------------------------------------------------------------------------
+ *        Definitions
+ *----------------------------------------------------------------------------*/
+/* EFC command */
+#define EFC_FCMD_GETD    0x00
+#define EFC_FCMD_WP      0x01
+#define EFC_FCMD_WPL     0x02
+#define EFC_FCMD_EWP     0x03
+#define EFC_FCMD_EWPL    0x04
+#define EFC_FCMD_EA      0x05
+#define EFC_FCMD_SLB     0x08
+#define EFC_FCMD_CLB     0x09
+#define EFC_FCMD_GLB     0x0A
+#define EFC_FCMD_SFB     0x0B
+#define EFC_FCMD_CFB     0x0C
+#define EFC_FCMD_GFB     0x0D
+#define EFC_FCMD_STUI    0x0E /* Start unique ID */
+#define EFC_FCMD_SPUI    0x0F /* Stop unique ID */
+
+/* The IAP function entry addreass */
+#define CHIP_FLASH_IAP_ADDRESS  (0x00800008)
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Exported functions
+ *----------------------------------------------------------------------------*/
+
+extern void EFC_EnableFrdyIt( Efc* efc ) ;
+
+extern void EFC_DisableFrdyIt( Efc* efc ) ;
+
+extern void EFC_SetWaitState( Efc* efc, uint8_t cycles ) ;
+
+extern void EFC_TranslateAddress( Efc** pEfc, uint32_t dwAddress, uint16_t *pwPage, uint16_t *pwOffset ) ;
+
+extern void EFC_ComputeAddress( Efc* efc, uint16_t wPage, uint16_t wOffset, uint32_t *pdwAddress ) ;
+
+extern void EFC_StartCommand( Efc* efc, uint32_t dwCommand, uint32_t dwArgument ) ;
+
+extern uint32_t EFC_PerformCommand( Efc* efc, uint32_t dwCommand, uint32_t dwArgument, uint32_t dwUseIAP ) ;
+
+extern uint32_t EFC_GetStatus( Efc* efc ) ;
+
+extern uint32_t EFC_GetResult( Efc* efc ) ;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* #ifndef _EEFC_ */
+

firmware/atmel_softpack_libraries/libchip_sam3s/include/flashd.h

@@ -0,0 +1,79 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+*/
+
+/**
+ * \file
+ *
+ * The flash driver provides the unified interface for flash program operations.
+ *
+ */
+
+#ifndef _FLASHD_
+#define _FLASHD_
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Exported functions
+ *----------------------------------------------------------------------------*/
+
+extern void FLASHD_Initialize( uint32_t dwMCk, uint32_t dwUseIAP ) ;
+
+extern uint32_t FLASHD_Erase( uint32_t dwAddress ) ;
+
+extern uint32_t FLASHD_Write( uint32_t dwAddress, const void *pvBuffer, uint32_t dwSize ) ;
+
+extern uint32_t FLASHD_Lock( uint32_t dwStart, uint32_t dwEnd, uint32_t *pdwActualStart, uint32_t *pdwActualEnd ) ;
+
+extern uint32_t FLASHD_Unlock( uint32_t dwStart, uint32_t dwEnd, uint32_t *pdwActualStart, uint32_t *pdwActualEnd ) ;
+
+extern uint32_t FLASHD_IsLocked( uint32_t dwStart, uint32_t dwEnd ) ;
+
+extern uint32_t FLASHD_SetGPNVM( uint8_t gpnvm ) ;
+
+extern uint32_t FLASHD_ClearGPNVM( uint8_t gpnvm ) ;
+
+extern uint32_t FLASHD_IsGPNVMSet( uint8_t gpnvm ) ;
+
+#define FLASHD_IsSecurityBitSet() FLASHD_IsGPNVMSet( 0 )
+
+#define FLASHD_SetSecurityBit()   FLASHD_SetGPNVM( 0 )
+
+extern uint32_t FLASHD_ReadUniqueID( uint32_t* pdwUniqueID ) ;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* #ifndef _FLASHD_ */
+

firmware/atmel_softpack_libraries/libchip_sam3s/include/trace.h

@@ -176,7 +176,7 @@ extern void TRACE_CONFIGURE( uint32_t dwBaudRate, uint32_t dwMCk ) ;
 
 /* Trace compilation depends on TRACE_LEVEL value */
 #if (TRACE_LEVEL >= TRACE_LEVEL_DEBUG)
-#define TRACE_DEBUG(...)      { printf("-D- " __VA_ARGS__); printf("(%s func. %s)\n\r", __FILE__, __FUNCTION__); }
+#define TRACE_DEBUG(...)      { printf("-D- " __VA_ARGS__); }
 #define TRACE_DEBUG_WP(...)   { printf(__VA_ARGS__); }
 #else
 #define TRACE_DEBUG(...)      { }

firmware/atmel_softpack_libraries/libchip_sam3s/include/unique_id.h

@@ -0,0 +1,3 @@
+#pragma once
+
+void EEFC_ReadUniqueID(unsigned int *pdwUniqueID);

firmware/atmel_softpack_libraries/libchip_sam3s/source/USBD_HAL.c

@@ -45,8 +45,14 @@
  *      Headers
  *---------------------------------------------------------------------------*/
 
+#ifdef TRACE_LEVEL
+#undef TRACE_LEVEL
+#endif
+#define TRACE_LEVEL TRACE_LEVEL_WARNING
+
 #include "chip.h"
 #include "USBD_HAL.h"
+#include <usb/device/dfu/dfu.h>
 
 #include <stdbool.h>
 #include <stdint.h>
@@ -1156,6 +1162,22 @@ void USBD_IrqHandler(void)
     else if ((status & UDP_ISR_ENDBUSRES) != 0) {
 
         TRACE_INFO_WP("EoBRes ");
+
+#if defined(BOARD_USB_DFU)
+#if defined(APPLICATION_dfu)
+	/* if we are currently in the DFU bootloader, and we are beyond
+	 * the MANIFEST stage, we shall switch to the normal
+	 * application */
+	if (g_dfu->past_manifest)
+		USBDFU_SwitchToApp();
+#else
+	/* if we are currently in the main application, and we are in
+	 * appDETACH state, switch into the DFU bootloader */
+	if (g_dfu->state == DFU_STATE_appDETACH)
+		DFURT_SwitchToDFU();
+#endif /* APPLICATION_dfu */
+#endif /* BOARD_USB_DFU */
+
         /* Flush and enable the Suspend interrupt */
         UDP->UDP_ICR = UDP_ICR_WAKEUP | UDP_ICR_RXRSM | UDP_ICR_RXSUSP;
         UDP->UDP_IER = UDP_IER_RXSUSP;

firmware/atmel_softpack_libraries/libchip_sam3s/source/efc.c

@@ -0,0 +1,290 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/** \addtogroup efc_module Working with EEFC
+ * The EEFC driver provides the interface to configure and use the EEFC
+ * peripheral.
+ *
+ * The user needs to set the number of wait states depending on the frequency used.\n
+ * Configure number of cycles for flash read/write operations in the FWS field of EEFC_FMR.
+ *
+ * It offers a function to send flash command to EEFC and waits for the
+ * flash to be ready.
+ *
+ * To send flash command, the user could do in either of following way:
+ * <ul>
+ * <li>Write a correct key, command and argument in EEFC_FCR. </li>
+ * <li>Or, Use IAP (In Application Programming) function which is executed from
+ * ROM directly, this allows flash programming to be done by code running in flash.</li>
+ * <li>Once the command is achieved, it can be detected even by polling EEFC_FSR or interrupt.
+ * </ul>
+ *
+ * The command argument could be a page number,GPNVM number or nothing, it depends on
+ * the command itself. Some useful functions in this driver could help user tranlate physical
+ * flash address into a page number and vice verse.
+ *
+ * For more accurate information, please look at the EEFC section of the
+ * Datasheet.
+ *
+ * Related files :\n
+ * \ref efc.c\n
+ * \ref efc.h.\n
+*/
+/*@{*/
+/*@}*/
+
+
+/**
+ * \file
+ *
+ * Implementation of Enhanced Embedded Flash Controller (EEFC).
+ *
+ */
+
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+#include "chip.h"
+#include "efc.h"
+
+#include <assert.h>
+
+/*----------------------------------------------------------------------------
+ *        Exported functions
+ *----------------------------------------------------------------------------*/
+
+/**
+ * \brief Enables the flash ready interrupt source on the EEFC peripheral.
+ *
+ * \param efc  Pointer to a Efc instance
+ */
+extern void EFC_EnableFrdyIt( Efc* efc )
+{
+    efc->EEFC_FMR |= EEFC_FMR_FRDY ;
+}
+
+/**
+ * \brief Disables the flash ready interrupt source on the EEFC peripheral.
+ *
+ * \param efc  Pointer to a Efc instance
+ */
+
+extern void EFC_DisableFrdyIt( Efc* efc )
+{
+    efc->EEFC_FMR &= ~((uint32_t)EEFC_FMR_FRDY) ;
+}
+
+
+/**
+ * \brief Set read/write wait state on the EEFC perpherial.
+ *
+ * \param efc  Pointer to a Efc instance
+ * \param cycles  the number of wait states in cycle.
+ */
+
+extern void EFC_SetWaitState( Efc* efc, uint8_t ucCycles )
+{
+    uint32_t dwValue ;
+
+    dwValue = efc->EEFC_FMR ;
+    dwValue &= ~((uint32_t)EEFC_FMR_FWS_Msk) ;
+    dwValue |= EEFC_FMR_FWS(ucCycles);
+    efc->EEFC_FMR = dwValue ;
+}
+
+/**
+ * \brief Returns the current status of the EEFC.
+ *
+ * \note Keep in mind that this function clears the value of some status bits (LOCKE, PROGE).
+ *
+ * \param efc  Pointer to a Efc instance
+ */
+extern uint32_t EFC_GetStatus( Efc* efc )
+{
+    return efc->EEFC_FSR ;
+}
+
+/**
+ * \brief Returns the result of the last executed command.
+ *
+ * \param efc  Pointer to a Efc instance
+ */
+extern uint32_t EFC_GetResult( Efc* efc )
+{
+    return efc->EEFC_FRR ;
+}
+
+/**
+ * \brief Translates the given address page and offset values.
+ * \note The resulting values are stored in the provided variables if they are not null.
+ *
+ * \param efc  Pointer to a Efc instance
+ * \param address  Address to translate.
+ * \param pPage  First page accessed.
+ * \param pOffset  Byte offset in first page.
+ */
+extern void EFC_TranslateAddress( Efc** ppEfc, uint32_t dwAddress, uint16_t* pwPage, uint16_t* pwOffset )
+{
+    Efc *pEfc ;
+    uint16_t wPage ;
+    uint16_t wOffset ;
+
+    assert( dwAddress >= IFLASH_ADDR ) ;
+    assert( dwAddress <= (IFLASH_ADDR + IFLASH_SIZE) ) ;
+
+    pEfc = EFC ;
+    wPage = (dwAddress - IFLASH_ADDR) / IFLASH_PAGE_SIZE;
+    wOffset = (dwAddress - IFLASH_ADDR) % IFLASH_PAGE_SIZE;
+
+    TRACE_DEBUG( "Translated 0x%08X to page=%d and offset=%d\n\r", dwAddress, wPage, wOffset ) ;
+    /* Store values */
+    if ( pEfc )
+    {
+        *ppEfc = pEfc ;
+    }
+
+    if ( pwPage )
+    {
+        *pwPage = wPage ;
+    }
+
+    if ( pwOffset )
+    {
+        *pwOffset = wOffset ;
+    }
+}
+
+/**
+ * \brief Computes the address of a flash access given the page and offset.
+ *
+ * \param efc  Pointer to a Efc instance
+ * \param page  Page number.
+ * \param offset  Byte offset inside page.
+ * \param pAddress  Computed address (optional).
+ */
+extern void EFC_ComputeAddress( Efc *efc, uint16_t wPage, uint16_t wOffset, uint32_t *pdwAddress )
+{
+    uint32_t dwAddress ;
+	
+    assert( efc ) ;
+    assert( wPage <= IFLASH_NB_OF_PAGES ) ;
+    assert( wOffset < IFLASH_PAGE_SIZE ) ;
+	
+    /* Compute address */
+    dwAddress = IFLASH_ADDR + wPage * IFLASH_PAGE_SIZE + wOffset ;
+	
+    /* Store result */
+    if ( pdwAddress != NULL )
+	{
+        *pdwAddress = dwAddress ;
+    }
+}
+
+/**
+ * \brief Starts the executing the given command on the EEFC and returns as soon as the command is started.
+ *
+ * \note It does NOT set the FMCN field automatically.
+ * \param efc  Pointer to a Efc instance
+ * \param command  Command to execute.
+ * \param argument  Command argument (should be 0 if not used).
+ */
+extern void EFC_StartCommand( Efc* efc, uint32_t dwCommand, uint32_t dwArgument )
+{
+    /* Check command & argument */
+    switch ( dwCommand )
+    {
+        case EFC_FCMD_WP:
+        case EFC_FCMD_WPL:
+        case EFC_FCMD_EWP:
+        case EFC_FCMD_EWPL:
+        case EFC_FCMD_SLB:
+        case EFC_FCMD_CLB:
+            assert( dwArgument < IFLASH_NB_OF_PAGES ) ;
+        break ;
+
+        case EFC_FCMD_SFB:
+        case EFC_FCMD_CFB:
+            assert( dwArgument < 2 ) ;
+        break;
+
+        case EFC_FCMD_GETD:
+        case EFC_FCMD_EA:
+        case EFC_FCMD_GLB:
+        case EFC_FCMD_GFB:
+        case EFC_FCMD_STUI:
+            assert( dwArgument == 0 ) ;
+        break;
+
+        default: assert( 0 ) ;
+    }
+
+    /* Start command Embedded flash */
+    assert( (efc->EEFC_FSR & EEFC_FMR_FRDY) == EEFC_FMR_FRDY ) ;
+    efc->EEFC_FCR = EEFC_FCR_FKEY(0x5A) | EEFC_FCR_FARG(dwArgument) | EEFC_FCR_FCMD(dwCommand) ;
+}
+
+/**
+ * \brief Performs the given command and wait until its completion (or an error).
+ *
+ * \param efc  Pointer to a Efc instance
+ * \param command  Command to perform.
+ * \param argument  Optional command argument.
+ *
+ * \return 0 if successful, otherwise returns an error code.
+ */
+
+extern uint32_t EFC_PerformCommand( Efc* efc, uint32_t dwCommand, uint32_t dwArgument, uint32_t dwUseIAP )
+{
+    if ( dwUseIAP != 0 )
+    {
+        /* Pointer on IAP function in ROM */
+        static uint32_t (*IAP_PerformCommand)( uint32_t, uint32_t ) ;
+
+        IAP_PerformCommand = (uint32_t (*)( uint32_t, uint32_t )) *((uint32_t*)CHIP_FLASH_IAP_ADDRESS ) ;
+        IAP_PerformCommand( 0, EEFC_FCR_FKEY(0x5A) | EEFC_FCR_FARG(dwArgument) | EEFC_FCR_FCMD(dwCommand) ) ;
+
+        return (efc->EEFC_FSR & (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE)) ;
+    }
+    else
+    {
+        uint32_t dwStatus ;
+
+        efc->EEFC_FCR = EEFC_FCR_FKEY(0x5A) | EEFC_FCR_FARG(dwArgument) | EEFC_FCR_FCMD(dwCommand) ;
+        do
+        {
+            dwStatus = efc->EEFC_FSR ;
+        }
+        while ( (dwStatus & EEFC_FSR_FRDY) != EEFC_FSR_FRDY ) ;
+
+        return ( dwStatus & (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE) ) ;
+    }
+}
+
+

firmware/atmel_softpack_libraries/libchip_sam3s/source/exceptions.c

@@ -52,6 +52,7 @@
  */
 void IrqHandlerNotUsed( void )
 {
+    printf("NotUsed\r\n");
     while ( 1 ) ;
 }
 
@@ -60,15 +61,50 @@ void IrqHandlerNotUsed( void )
  */
 WEAK void NMI_Handler( void )
 {
+    printf("NMI\r\n");
     while ( 1 ) ;
 }
 
 /**
  * \brief Default HardFault interrupt handler.
  */
+struct hardfault_args {
+	unsigned long r0;
+	unsigned long r1;
+	unsigned long r2;
+	unsigned long r3;
+	unsigned long r12;
+	unsigned long lr;
+	unsigned long pc;
+	unsigned long psr;
+};
+
+void hard_fault_handler_c(struct hardfault_args *args)
+{
+    printf("HardFault\r\n");
+    printf("R0=%08x, R1=%08x, R2=%08x, R3=%08x, R12=%08x\r\n",
+	   args->r0, args->r1, args->r2, args->r3, args->r12);
+    printf("LR[R14]=%08x, PC[R15]=%08x, PSR=%08x\r\n",
+	   args->lr, args->pc, args->psr);
+    printf("BFAR=%08x, CFSR=%08x, HFSR=%08x\r\n",
+	   SCB->BFAR, SCB->CFSR, SCB->HFSR);
+    printf("DFSR=%08x, AFSR=%08x, SHCSR=%08x\r\n",
+	   SCB->DFSR, SCB->CFSR, SCB->SHCSR);
+    while ( 1 ) ;
+}
+
+__attribute__((naked))
 WEAK void HardFault_Handler( void )
 {
-    while ( 1 ) ;
+	__asm volatile(
+		".syntax unified	\n"
+		" tst lr, #4		\n"
+		" ite eq		\n"
+		" mrseq r0, msp		\n"
+		" mrsne r0, psp		\n"
+		//" ldr r1, [r0, #24] 	\n"
+		" b hard_fault_handler_c\n"
+		".syntax divided	\n");
 }
 
 /**
@@ -76,6 +112,7 @@ WEAK void HardFault_Handler( void )
  */
 WEAK void MemManage_Handler( void )
 {
+    printf("MemManage\r\n");
     while ( 1 ) ;
 }
 
@@ -84,6 +121,7 @@ WEAK void MemManage_Handler( void )
  */
 WEAK void BusFault_Handler( void )
 {
+    printf("BusFault\r\n");
     while ( 1 ) ;
 }
 
@@ -92,6 +130,7 @@ WEAK void BusFault_Handler( void )
  */
 WEAK void UsageFault_Handler( void )
 {
+    printf("UsageFault\r\n");
     while ( 1 ) ;
 }
 
@@ -100,6 +139,7 @@ WEAK void UsageFault_Handler( void )
  */
 WEAK void SVC_Handler( void )
 {
+    printf("SVC\r\n");
     while ( 1 ) ;
 }
 
@@ -108,6 +148,7 @@ WEAK void SVC_Handler( void )
  */
 WEAK void DebugMon_Handler( void )
 {
+    printf("DebugMon\r\n");
     while ( 1 ) ;
 }
 
@@ -116,6 +157,7 @@ WEAK void DebugMon_Handler( void )
  */
 WEAK void PendSV_Handler( void )
 {
+    printf("PendSV\r\n");
     while ( 1 ) ;
 }
 
@@ -124,6 +166,7 @@ WEAK void PendSV_Handler( void )
  */
 WEAK void SysTick_Handler( void )
 {
+    printf("SysTick\r\n");
     while ( 1 ) ;
 }
 
@@ -132,6 +175,7 @@ WEAK void SysTick_Handler( void )
  */
 WEAK void SUPC_IrqHandler( void )
 {
+    printf("SUPC\r\n");
     while ( 1 ) ;
 }
 
@@ -140,6 +184,7 @@ WEAK void SUPC_IrqHandler( void )
  */
 WEAK void RSTC_IrqHandler( void )
 {
+    printf("RSTC\r\n");
     while ( 1 ) ;
 }
 
@@ -148,6 +193,7 @@ WEAK void RSTC_IrqHandler( void )
  */
 WEAK void RTC_IrqHandler( void )
 {
+    printf("RTC\r\n");
     while ( 1 ) ;
 }
 
@@ -156,6 +202,7 @@ WEAK void RTC_IrqHandler( void )
  */
 WEAK void RTT_IrqHandler( void )
 {
+    printf("RTT\r\n");
     while ( 1 ) ;
 }
 
@@ -164,6 +211,7 @@ WEAK void RTT_IrqHandler( void )
  */
 WEAK void WDT_IrqHandler( void )
 {
+    printf("WDT\r\n");
     while ( 1 ) ;
 }
 
@@ -172,6 +220,7 @@ WEAK void WDT_IrqHandler( void )
  */
 WEAK void PMC_IrqHandler( void )
 {
+    printf("PMC\r\n");
     while ( 1 ) ;
 }
 
@@ -180,6 +229,7 @@ WEAK void PMC_IrqHandler( void )
  */
 WEAK void EEFC_IrqHandler( void )
 {
+    printf("EEFC\r\n");
     while ( 1 ) ;
 }
 
@@ -188,6 +238,7 @@ WEAK void EEFC_IrqHandler( void )
  */
 WEAK void UART0_IrqHandler( void )
 {
+    printf("UART0\r\n");
     while ( 1 ) ;
 }
 
@@ -196,6 +247,7 @@ WEAK void UART0_IrqHandler( void )
  */
 WEAK void UART1_IrqHandler( void )
 {
+    printf("UART1\r\n");
     while ( 1 ) ;
 }
 
@@ -204,6 +256,7 @@ WEAK void UART1_IrqHandler( void )
  */
 WEAK void SMC_IrqHandler( void )
 {
+    printf("SMC\r\n");
     while ( 1 ) ;
 }
 
@@ -212,6 +265,7 @@ WEAK void SMC_IrqHandler( void )
  */
 WEAK void PIOA_IrqHandler( void )
 {
+    printf("PIOA\r\n");
     while ( 1 ) ;
 }
 
@@ -220,6 +274,7 @@ WEAK void PIOA_IrqHandler( void )
  */
 WEAK void PIOB_IrqHandler( void )
 {
+    printf("PIOB\r\n");
     while ( 1 ) ;
 }
 
@@ -228,6 +283,7 @@ WEAK void PIOB_IrqHandler( void )
  */
 WEAK void PIOC_IrqHandler( void )
 {
+    printf("PIOC\r\n");
     while ( 1 ) ;
 }
 
@@ -236,6 +292,7 @@ WEAK void PIOC_IrqHandler( void )
  */
 WEAK void USART0_IrqHandler( void )
 {
+    printf("USART0\r\n");
     while ( 1 ) ;
 }
 
@@ -244,6 +301,7 @@ WEAK void USART0_IrqHandler( void )
  */
 WEAK void USART1_IrqHandler( void )
 {
+    printf("USART1\r\n");
     while ( 1 ) ;
 }
 
@@ -252,6 +310,7 @@ WEAK void USART1_IrqHandler( void )
  */
 WEAK void MCI_IrqHandler( void )
 {
+    printf("MCI\r\n");
     while ( 1 ) ;
 }
 
@@ -260,6 +319,7 @@ WEAK void MCI_IrqHandler( void )
  */
 WEAK void TWI0_IrqHandler( void )
 {
+    printf("TWI0\r\n");
     while ( 1 ) ;
 }
 
@@ -268,6 +328,7 @@ WEAK void TWI0_IrqHandler( void )
  */
 WEAK void TWI1_IrqHandler( void )
 {
+    printf("TWI1\r\n");
     while ( 1 ) ;
 }
 
@@ -276,6 +337,7 @@ WEAK void TWI1_IrqHandler( void )
  */
 WEAK void SPI_IrqHandler( void )
 {
+    printf("SPI\r\n");
     while ( 1 ) ;
 }
 
@@ -284,6 +346,7 @@ WEAK void SPI_IrqHandler( void )
  */
 WEAK void SSC_IrqHandler( void )
 {
+    printf("SSC\r\n");
     while ( 1 ) ;
 }
 
@@ -292,6 +355,7 @@ WEAK void SSC_IrqHandler( void )
  */
 WEAK void TC0_IrqHandler( void )
 {
+    printf("TC0\r\n");
     while ( 1 ) ;
 }
 
@@ -300,6 +364,7 @@ WEAK void TC0_IrqHandler( void )
  */
 WEAK void TC1_IrqHandler( void )
 {
+    printf("TC1\r\n");
     while ( 1 ) ;
 }
 
@@ -308,6 +373,7 @@ WEAK void TC1_IrqHandler( void )
  */
 WEAK void TC2_IrqHandler( void )
 {
+    printf("TC2\r\n");
     while ( 1 ) ;
 }
 
@@ -316,6 +382,7 @@ WEAK void TC2_IrqHandler( void )
  */
 WEAK void TC3_IrqHandler( void )
 {
+    printf("TC3\r\n");
     while ( 1 ) ;
 }
 
@@ -324,6 +391,7 @@ WEAK void TC3_IrqHandler( void )
  */
 WEAK void TC4_IrqHandler( void )
 {
+    printf("TC4\r\n");
     while ( 1 ) ;
 }
 
@@ -332,6 +400,7 @@ WEAK void TC4_IrqHandler( void )
  */
 WEAK void TC5_IrqHandler( void )
 {
+    printf("TC5\r\n");
     while ( 1 ) ;
 }
 
@@ -340,6 +409,7 @@ WEAK void TC5_IrqHandler( void )
  */
 WEAK void ADC_IrqHandler( void )
 {
+    printf("ADC\r\n");
     while ( 1 ) ;
 }
 
@@ -348,6 +418,7 @@ WEAK void ADC_IrqHandler( void )
  */
 WEAK void DAC_IrqHandler( void )
 {
+    printf("DAC\r\n");
     while ( 1 ) ;
 }
 
@@ -356,6 +427,7 @@ WEAK void DAC_IrqHandler( void )
  */
 WEAK void PWM_IrqHandler( void )
 {
+    printf("PWM\r\n");
     while ( 1 ) ;
 }
 
@@ -364,6 +436,7 @@ WEAK void PWM_IrqHandler( void )
  */
 WEAK void CRCCU_IrqHandler( void )
 {
+    printf("CRCCU\r\n");
     while ( 1 ) ;
 }
 
@@ -372,6 +445,7 @@ WEAK void CRCCU_IrqHandler( void )
  */
 WEAK void ACC_IrqHandler( void )
 {
+    printf("ACC\r\n");
     while ( 1 ) ;
 }
 
@@ -380,5 +454,6 @@ WEAK void ACC_IrqHandler( void )
  */
 WEAK void USBD_IrqHandler( void )
 {
+    printf("USBD\r\n");
     while ( 1 ) ;
 }

firmware/atmel_softpack_libraries/libchip_sam3s/source/flashd.c

@@ -0,0 +1,517 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/** \addtogroup flashd_module Flash Memory Interface
+ * The flash driver manages the programming, erasing, locking and unlocking sequences
+ * with dedicated commands.
+ *
+ * To implement flash programing operation, the user has to follow these few steps :
+ * <ul>
+ * <li>Configue flash wait states to initializes the flash. </li>
+ * <li>Checks whether a region to be programmed is locked. </li>
+ * <li>Unlocks the user region to be programmed if the region have locked before.</li>
+ * <li>Erases the user page before program (optional).</li>
+ * <li>Writes the user page from the page buffer.</li>
+ * <li>Locks the region of programmed area if any.</li>
+ * </ul>
+ *
+ * Writing 8-bit and 16-bit data is not allowed and may lead to unpredictable data corruption.
+ * A check of this validity and padding for 32-bit alignment should be done in write algorithm.
+
+ * Lock/unlock range associated with the user address range is automatically translated.
+ *
+ * This security bit can be enabled through the command "Set General Purpose NVM Bit 0".
+ *
+ * A 128-bit factory programmed unique ID could be read to serve several purposes.
+ *
+ * The driver accesses the flash memory by calling the lowlevel module provided in \ref efc_module.
+ * For more accurate information, please look at the EEFC section of the Datasheet.
+ *
+ * Related files :\n
+ * \ref flashd.c\n
+ * \ref flashd.h.\n
+ * \ref efc.c\n
+ * \ref efc.h.\n
+*/
+/*@{*/
+/*@}*/
+
+
+/**
+ * \file
+ *
+ * The flash driver provides the unified interface for flash program operations.
+ *
+ */
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+#include "chip.h"
+#include "flashd.h"
+#include "efc.h"
+
+#include <string.h>
+#include <assert.h>
+
+/*----------------------------------------------------------------------------
+ *        Local variables
+ *----------------------------------------------------------------------------*/
+
+//static NO_INIT uint8_t _aucPageBuffer[IFLASH_PAGE_SIZE] ;
+static NO_INIT uint32_t _adwPageBuffer[IFLASH_PAGE_SIZE/4] ;
+static uint8_t* _aucPageBuffer = (uint8_t*)_adwPageBuffer;
+static NO_INIT uint32_t _dwUseIAP ;
+
+/*----------------------------------------------------------------------------
+ *        Local macros
+ *----------------------------------------------------------------------------*/
+
+#define min( a, b ) (((a) < (b)) ? (a) : (b))
+
+/*----------------------------------------------------------------------------
+ *        Local functions
+ *----------------------------------------------------------------------------*/
+
+
+/**
+ * \brief Computes the lock range associated with the given address range.
+ *
+ * \param dwStart  Start address of lock range.
+ * \param dwEnd  End address of lock range.
+ * \param pdwActualStart  Actual start address of lock range.
+ * \param pdwActualEnd  Actual end address of lock range.
+ */
+static void ComputeLockRange( uint32_t dwStart, uint32_t dwEnd, uint32_t *pdwActualStart, uint32_t *pdwActualEnd )
+{
+    Efc* pStartEfc ;
+    Efc* pEndEfc ;
+    uint16_t wStartPage ;
+    uint16_t wEndPage ;
+    uint16_t wNumPagesInRegion ;
+    uint16_t wActualStartPage ;
+    uint16_t wActualEndPage ;
+
+    // Convert start and end address in page numbers
+    EFC_TranslateAddress( &pStartEfc, dwStart, &wStartPage, 0 ) ;
+    EFC_TranslateAddress( &pEndEfc, dwEnd, &wEndPage, 0 ) ;
+
+    // Find out the first page of the first region to lock
+    wNumPagesInRegion = IFLASH_LOCK_REGION_SIZE / IFLASH_PAGE_SIZE ;
+    wActualStartPage = wStartPage - (wStartPage % wNumPagesInRegion) ;
+    wActualEndPage = wEndPage ;
+
+    if ( (wEndPage % wNumPagesInRegion) != 0 )
+    {
+        wActualEndPage += wNumPagesInRegion - (wEndPage % wNumPagesInRegion) ;
+    }
+    // Store actual page numbers
+    EFC_ComputeAddress( pStartEfc, wActualStartPage, 0, pdwActualStart ) ;
+    EFC_ComputeAddress( pEndEfc, wActualEndPage, 0, pdwActualEnd ) ;
+    TRACE_DEBUG( "Actual lock range is 0x%06X - 0x%06X\n\r", *pdwActualStart, *pdwActualEnd ) ;
+}
+
+
+/*----------------------------------------------------------------------------
+ *        Exported functions
+ *----------------------------------------------------------------------------*/
+
+/**
+ * \brief Initializes the flash driver.
+ *
+ * \param mck  Master clock frequency in Hz.
+ */
+
+extern void FLASHD_Initialize( uint32_t dwMCk, uint32_t dwUseIAP )
+{
+    EFC_DisableFrdyIt( EFC ) ;
+#if 1
+    /* See Revision A errata 46.1.1.3 */
+    EFC_SetWaitState(EFC, 6);
+#else
+    if ( (dwMCk/1000000) >= 64 )
+	{
+        EFC_SetWaitState( EFC, 2 ) ;
+    }
+    else
+	{
+	    if ( (dwMCk/1000000) >= 50 )
+	    {
+            EFC_SetWaitState( EFC, 1 ) ;
+        }
+        else
+	    {
+            EFC_SetWaitState( EFC, 0 ) ;
+        }
+	}
+#endif
+    _dwUseIAP=dwUseIAP ;
+}
+
+/**
+ * \brief Erases the entire flash.
+ *
+ * \param address  Flash start address.
+ * \return 0 if successful; otherwise returns an error code.
+ */
+extern uint32_t FLASHD_Erase( uint32_t dwAddress )
+{
+    Efc* pEfc ;
+    uint16_t wPage ;
+    uint16_t wOffset ;
+    uint32_t dwError ;
+
+    assert( (dwAddress >=IFLASH_ADDR) || (dwAddress <= (IFLASH_ADDR + IFLASH_SIZE)) ) ;
+
+    // Translate write address
+    EFC_TranslateAddress( &pEfc, dwAddress, &wPage, &wOffset ) ;
+    dwError = EFC_PerformCommand( pEfc, EFC_FCMD_EA, 0, _dwUseIAP ) ;
+	
+    return dwError ;
+}
+
+/**
+ * \brief Writes a data buffer in the internal flash
+ *
+ * \note This function works in polling mode, and thus only returns when the
+ * data has been effectively written.
+ * \param address  Write address.
+ * \param pBuffer  Data buffer.
+ * \param size  Size of data buffer in bytes.
+ * \return 0 if successful, otherwise returns an error code.
+ */
+extern uint32_t FLASHD_Write( uint32_t dwAddress, const void *pvBuffer, uint32_t dwSize )
+{
+    Efc* pEfc ;
+    uint16_t page ;
+    uint16_t offset ;
+    uint32_t writeSize ;
+    uint32_t pageAddress ;
+    uint16_t padding ;
+    uint32_t dwError ;
+    uint32_t sizeTmp ;
+    uint32_t *pAlignedDestination ;
+    uint32_t *pAlignedSource ;
+
+    assert( pvBuffer ) ;
+    assert( dwAddress >=IFLASH_ADDR ) ;
+    assert( (dwAddress + dwSize) <= (IFLASH_ADDR + IFLASH_SIZE) ) ;
+
+    /* Translate write address */
+    EFC_TranslateAddress( &pEfc, dwAddress, &page, &offset ) ;
+
+    /* Write all pages */
+    while ( dwSize > 0 )
+    {
+        /* Copy data in temporary buffer to avoid alignment problems */
+        writeSize = min((uint32_t)IFLASH_PAGE_SIZE - offset, dwSize ) ;
+        EFC_ComputeAddress(pEfc, page, 0, &pageAddress ) ;
+        padding = IFLASH_PAGE_SIZE - offset - writeSize ;
+
+        /* Pre-buffer data */
+        memcpy( _aucPageBuffer, (void *) pageAddress, offset);
+
+        /* Buffer data */
+        memcpy( _aucPageBuffer + offset, pvBuffer, writeSize);
+
+        /* Post-buffer data */
+        memcpy( _aucPageBuffer + offset + writeSize, (void *) (pageAddress + offset + writeSize), padding);
+
+        /* Write page
+         * Writing 8-bit and 16-bit data is not allowed and may lead to unpredictable data corruption
+         */
+        pAlignedDestination = (uint32_t*)pageAddress ;
+        pAlignedSource = (uint32_t*)_adwPageBuffer ;
+        sizeTmp = IFLASH_PAGE_SIZE ;
+
+        while ( sizeTmp >= 4 )
+        {
+            *pAlignedDestination++ = *pAlignedSource++;
+            sizeTmp -= 4;
+        }
+
+        /* Send writing command */
+        dwError = EFC_PerformCommand( pEfc, EFC_FCMD_EWP, page, _dwUseIAP ) ;
+        if ( dwError )
+        {
+            return dwError ;
+        }
+
+        /* Progression */
+        dwAddress += IFLASH_PAGE_SIZE ;
+        pvBuffer = (void *)((uint32_t) pvBuffer + writeSize) ;
+        dwSize -= writeSize ;
+        page++;
+        offset = 0;
+    }
+
+    return 0 ;
+}
+/**
+ * \brief Locks all the regions in the given address range. The actual lock range is
+ * reported through two output parameters.
+ *
+ * \param start  Start address of lock range.
+ * \param end    End address of lock range.
+ * \param pActualStart  Start address of the actual lock range (optional).
+ * \param pActualEnd  End address of the actual lock range (optional).
+ * \return 0 if successful, otherwise returns an error code.
+ */
+extern uint32_t FLASHD_Lock( uint32_t start, uint32_t end, uint32_t *pActualStart, uint32_t *pActualEnd )
+{
+    Efc *pEfc ;
+    uint32_t actualStart, actualEnd ;
+    uint16_t startPage, endPage ;
+    uint32_t dwError ;
+    uint16_t numPagesInRegion = IFLASH_LOCK_REGION_SIZE / IFLASH_PAGE_SIZE;
+
+    /* Compute actual lock range and store it */
+    ComputeLockRange( start, end, &actualStart, &actualEnd ) ;
+    if ( pActualStart != NULL )
+    {
+        *pActualStart = actualStart ;
+    }
+    if ( pActualEnd != NULL )
+    {
+        *pActualEnd = actualEnd;
+    }
+
+    /* Compute page numbers */
+    EFC_TranslateAddress( &pEfc, actualStart, &startPage, 0 ) ;
+    EFC_TranslateAddress( 0, actualEnd, &endPage, 0 ) ;
+
+    /* Lock all pages */
+    while ( startPage < endPage )
+    {
+        dwError = EFC_PerformCommand( pEfc, EFC_FCMD_SLB, startPage, _dwUseIAP ) ;
+        if ( dwError )
+        {
+            return dwError ;
+        }
+        startPage += numPagesInRegion;
+    }
+
+    return 0 ;
+}
+
+/**
+ * \brief Unlocks all the regions in the given address range. The actual unlock range is
+ * reported through two output parameters.
+ * \param start  Start address of unlock range.
+ * \param end  End address of unlock range.
+ * \param pActualStart  Start address of the actual unlock range (optional).
+ * \param pActualEnd  End address of the actual unlock range (optional).
+ * \return 0 if successful, otherwise returns an error code.
+ */
+extern uint32_t FLASHD_Unlock( uint32_t start, uint32_t end, uint32_t *pActualStart, uint32_t *pActualEnd )
+{
+    Efc* pEfc ;
+    uint32_t actualStart, actualEnd ;
+    uint16_t startPage, endPage ;
+    uint32_t dwError ;
+    uint16_t numPagesInRegion = IFLASH_LOCK_REGION_SIZE / IFLASH_PAGE_SIZE;
+
+    // Compute actual unlock range and store it
+    ComputeLockRange(start, end, &actualStart, &actualEnd);
+    if ( pActualStart != NULL )
+    {
+        *pActualStart = actualStart ;
+    }
+    if ( pActualEnd != NULL )
+    {
+        *pActualEnd = actualEnd ;
+    }
+
+    // Compute page numbers
+    EFC_TranslateAddress( &pEfc, actualStart, &startPage, 0 ) ;
+    EFC_TranslateAddress( 0, actualEnd, &endPage, 0 ) ;
+
+    // Unlock all pages
+    while ( startPage < endPage )
+    {
+        dwError = EFC_PerformCommand( pEfc, EFC_FCMD_CLB, startPage, _dwUseIAP ) ;
+        if ( dwError )
+        {
+            return dwError ;
+        }
+        startPage += numPagesInRegion ;
+    }
+    return 0 ;
+}
+
+/**
+ * \brief Returns the number of locked regions inside the given address range.
+ *
+ * \param start  Start address of range
+ * \param end    End address of range.
+ */
+extern uint32_t FLASHD_IsLocked( uint32_t start, uint32_t end )
+{
+    Efc *pEfc ;
+    uint16_t startPage, endPage ;
+    uint8_t startRegion, endRegion ;
+    uint32_t numPagesInRegion ;
+    uint32_t status ;
+    uint32_t dwError ;
+    uint32_t numLockedRegions = 0 ;
+
+    assert( end >= start ) ;
+    assert( (start >=IFLASH_ADDR) && (end <= IFLASH_ADDR + IFLASH_SIZE) ) ;
+
+    // Compute page numbers
+    EFC_TranslateAddress( &pEfc, start, &startPage, 0 ) ;
+    EFC_TranslateAddress( 0, end, &endPage, 0 ) ;
+
+    // Compute region numbers
+    numPagesInRegion = IFLASH_LOCK_REGION_SIZE / IFLASH_PAGE_SIZE ;
+    startRegion = startPage / numPagesInRegion ;
+    endRegion = endPage / numPagesInRegion ;
+    if ((endPage % numPagesInRegion) != 0)
+    {
+        endRegion++ ;
+    }
+
+    // Retrieve lock status
+    dwError = EFC_PerformCommand( pEfc, EFC_FCMD_GLB, 0, _dwUseIAP ) ;
+    assert( !dwError ) ;
+    status = EFC_GetResult( pEfc ) ;
+
+    // Check status of each involved region
+    while ( startRegion < endRegion )
+    {
+        if ( (status & (1 << startRegion)) != 0 )
+        {
+            numLockedRegions++ ;
+        }
+        startRegion++ ;
+    }
+
+    return numLockedRegions ;
+}
+
+/**
+ * \brief Check if the given GPNVM bit is set or not.
+ *
+ * \param gpnvm  GPNVM bit index.
+ * \returns 1 if the given GPNVM bit is currently set; otherwise returns 0.
+ */
+extern uint32_t FLASHD_IsGPNVMSet( uint8_t ucGPNVM )
+{
+    uint32_t dwError ;
+    uint32_t dwStatus ;
+
+    assert( ucGPNVM < 2 ) ;
+
+    /* Get GPNVMs status */
+    dwError = EFC_PerformCommand( EFC, EFC_FCMD_GFB, 0, _dwUseIAP ) ;
+    assert( !dwError ) ;
+    dwStatus = EFC_GetResult( EFC ) ;
+
+    /* Check if GPNVM is set */
+    if ( (dwStatus & (1 << ucGPNVM)) != 0 )
+    {
+        return 1 ;
+    }
+    else
+    {
+        return 0 ;
+    }
+}
+
+/**
+ * \brief Sets the selected GPNVM bit.
+ *
+ * \param gpnvm  GPNVM bit index.
+ * \returns 0 if successful; otherwise returns an error code.
+ */
+extern uint32_t FLASHD_SetGPNVM( uint8_t ucGPNVM )
+{
+    assert( ucGPNVM < 2 ) ;
+
+    if ( !FLASHD_IsGPNVMSet( ucGPNVM ) )
+    {
+        return EFC_PerformCommand( EFC, EFC_FCMD_SFB, ucGPNVM, _dwUseIAP ) ;
+    }
+    else
+    {
+        return 0 ;
+    }
+}
+
+/**
+ * \brief Clears the selected GPNVM bit.
+ *
+ * \param gpnvm  GPNVM bit index.
+ * \returns 0 if successful; otherwise returns an error code.
+ */
+extern uint32_t FLASHD_ClearGPNVM( uint8_t ucGPNVM )
+{
+    assert( ucGPNVM < 2 ) ;
+
+    if ( FLASHD_IsGPNVMSet( ucGPNVM ) )
+    {
+        return EFC_PerformCommand( EFC, EFC_FCMD_CFB, ucGPNVM, _dwUseIAP ) ;
+    }
+    else
+    {
+        return 0 ;
+    }
+}
+/**
+ * \brief Read the unique ID.
+ *
+ * \param uniqueID pointer on a 4bytes char containing the unique ID value.
+ * \returns 0 if successful; otherwise returns an error code.
+ */
+extern uint32_t FLASHD_ReadUniqueID( uint32_t* pdwUniqueID )
+{
+    uint32_t dwError ;
+
+    assert( pdwUniqueID != NULL ) ;
+
+    pdwUniqueID[0] = 0 ;
+    pdwUniqueID[1] = 0 ;
+    pdwUniqueID[2] = 0 ;
+    pdwUniqueID[3] = 0 ;
+
+    EFC_StartCommand( EFC, EFC_FCMD_STUI, 0 ) ;
+
+    pdwUniqueID[0] = *(uint32_t*) IFLASH_ADDR;
+    pdwUniqueID[1] = *(uint32_t*)(IFLASH_ADDR + 4) ;
+    pdwUniqueID[2] = *(uint32_t*)(IFLASH_ADDR + 8) ;
+    pdwUniqueID[3] = *(uint32_t*)(IFLASH_ADDR + 12) ;
+
+    dwError = EFC_PerformCommand( EFC, EFC_FCMD_SPUI, 0, _dwUseIAP ) ;
+    if ( dwError )
+    {
+        return dwError ;
+    }
+
+    return 0 ;
+}

firmware/atmel_softpack_libraries/libchip_sam3s/source/pio_it.c

@@ -83,9 +83,9 @@ static uint32_t _dwNumSources = 0;
  * \brief Stub, to handling all PIO Capture interrupts, if not defined.
  */
 /*----------------------------------------------------------------------------*/
-//extern WEAK void PIO_CaptureHandler( void )
-//{
-//}
+extern WEAK void PIO_CaptureHandler( void )
+{
+}
 
 /**
  * \brief Handles all interrupts on the given PIO controller.

firmware/atmel_softpack_libraries/libchip_sam3s/source/unique_id.c

@@ -0,0 +1,43 @@
+#include "chip.h"
+
+#define EFC_FCMD_STUI	0x0E
+#define EFC_FCMD_SPUI	0x0F
+
+__attribute__ ((section(".ramfunc")))
+void EEFC_ReadUniqueID(unsigned int *pdwUniqueID)
+{
+	unsigned int status;
+
+	/* Errata / Workaround: Set bit 16 of EEFC Flash Mode Register
+	 * to 1 */
+	EFC->EEFC_FMR |= (1 << 16);
+
+	/* Send the Start Read unique Identifier command (STUI) by
+	 * writing the Flash Command Register with the STUI command. */
+	EFC->EEFC_FCR = (0x5A << 24) | EFC_FCMD_STUI;
+
+	/* Wait for the FRDY bit to fall */
+	do {
+		status = EFC->EEFC_FSR;
+	} while ((status & EEFC_FSR_FRDY) == EEFC_FSR_FRDY);
+
+	/* The Unique Identifier is located in the first 128 bits of the
+	 * Flash memory mapping. So, at the address 0x400000-0x400003.
+	 * */
+	pdwUniqueID[0] = *(uint32_t *) IFLASH_ADDR;
+	pdwUniqueID[1] = *(uint32_t *) (IFLASH_ADDR + 4);
+	pdwUniqueID[2] = *(uint32_t *) (IFLASH_ADDR + 8);
+	pdwUniqueID[3] = *(uint32_t *) (IFLASH_ADDR + 12);
+
+	/* To stop the Unique Identifier mode, the user needs to send
+	 * the Stop Read unique Identifier command (SPUI) by writing the
+	 * Flash Command Register with the SPUI command. */
+	EFC->EEFC_FCR = (0x5A << 24) | EFC_FCMD_SPUI;
+
+	/* When the Stop read Unique Unique Identifier command (SPUI)
+	 * has been performed, the FRDY bit in the Flash Programming
+	 * Status Register (EEFC_FSR) rises. */
+	do {
+		status = EFC->EEFC_FSR;
+	} while ((status & EEFC_FSR_FRDY) != EEFC_FSR_FRDY);
+}

firmware/atmel_softpack_libraries/usb/common/dfu/usb_dfu.h

@@ -0,0 +1,81 @@
+#ifndef _USB_DFU_H
+#define _USB_DFU_H
+/* USB Device Firmware Update Implementation for OpenPCD
+ * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de>
+ *
+ * Protocol definitions for USB DFU
+ *
+ * This ought to be compliant to the USB DFU Spec 1.0 as available from
+ * http://www.usb.org/developers/devclass_docs/usbdfu10.pdf
+ *
+ */
+
+#include <stdint.h>
+
+#include <usb/include/USBRequests.h>
+
+#define USB_DT_DFU			0x21
+
+struct usb_dfu_func_descriptor {
+	uint8_t		bLength;
+	uint8_t		bDescriptorType;
+	uint8_t		bmAttributes;
+#define USB_DFU_CAN_DOWNLOAD	(1 << 0)
+#define USB_DFU_CAN_UPLOAD	(1 << 1)
+#define USB_DFU_MANIFEST_TOL	(1 << 2)
+#define USB_DFU_WILL_DETACH	(1 << 3)
+	uint16_t		wDetachTimeOut;
+	uint16_t		wTransferSize;
+	uint16_t		bcdDFUVersion;
+} __attribute__ ((packed));
+
+#define USB_DT_DFU_SIZE			9
+
+/* DFU class-specific requests (Section 3, DFU Rev 1.1) */
+#define USB_REQ_DFU_DETACH	0x00
+#define USB_REQ_DFU_DNLOAD	0x01
+#define USB_REQ_DFU_UPLOAD	0x02
+#define USB_REQ_DFU_GETSTATUS	0x03
+#define USB_REQ_DFU_CLRSTATUS	0x04
+#define USB_REQ_DFU_GETSTATE	0x05
+#define USB_REQ_DFU_ABORT	0x06
+
+struct dfu_status {
+	uint8_t bStatus;
+	uint8_t bwPollTimeout[3];
+	uint8_t bState;
+	uint8_t iString;
+} __attribute__((packed));
+
+#define DFU_STATUS_OK			0x00
+#define DFU_STATUS_errTARGET		0x01
+#define DFU_STATUS_errFILE		0x02
+#define DFU_STATUS_errWRITE		0x03
+#define DFU_STATUS_errERASE		0x04
+#define DFU_STATUS_errCHECK_ERASED	0x05
+#define DFU_STATUS_errPROG		0x06
+#define DFU_STATUS_errVERIFY		0x07
+#define DFU_STATUS_errADDRESS		0x08
+#define DFU_STATUS_errNOTDONE		0x09
+#define DFU_STATUS_errFIRMWARE		0x0a
+#define DFU_STATUS_errVENDOR		0x0b
+#define DFU_STATUS_errUSBR		0x0c
+#define DFU_STATUS_errPOR		0x0d
+#define DFU_STATUS_errUNKNOWN		0x0e
+#define DFU_STATUS_errSTALLEDPKT	0x0f
+
+enum dfu_state {
+	DFU_STATE_appIDLE		= 0,
+	DFU_STATE_appDETACH		= 1,
+	DFU_STATE_dfuIDLE		= 2,
+	DFU_STATE_dfuDNLOAD_SYNC	= 3,
+	DFU_STATE_dfuDNBUSY		= 4,
+	DFU_STATE_dfuDNLOAD_IDLE	= 5,
+	DFU_STATE_dfuMANIFEST_SYNC	= 6,
+	DFU_STATE_dfuMANIFEST		= 7,
+	DFU_STATE_dfuMANIFEST_WAIT_RST	= 8,
+	DFU_STATE_dfuUPLOAD_IDLE	= 9,
+	DFU_STATE_dfuERROR		= 10,
+};
+
+#endif /* _USB_DFU_H */

firmware/atmel_softpack_libraries/usb/device/dfu/dfu.c

@@ -0,0 +1,49 @@
+
+#include <usb/include/USBDescriptors.h>
+#include <usb/device/dfu/dfu.h>
+
+
+/* String 1 "SimTrace DFU Interface - Application Partition" */
+const struct USBStringDescriptor USBDFU_string1 = {
+	.hdr = {
+		.bLength = sizeof(USBGenericDescriptor) + 46 * sizeof(unsigned short),
+		.bDescriptorType = USBGenericDescriptor_STRING,
+	},
+	.wData = {	0x0053, 0x0069, 0x006d, 0x0054, 0x0072, 0x0061,
+			0x0063, 0x0065, 0x0020, 0x0044, 0x0046, 0x0055,
+			0x0020, 0x0049, 0x006e, 0x0074, 0x0065, 0x0072,
+			0x0066, 0x0061, 0x0063, 0x0065, 0x0020, 0x002d,
+			0x0020, 0x0041, 0x0070, 0x0070, 0x006c, 0x0069,
+			0x0063, 0x0061, 0x0074, 0x0069, 0x006f, 0x006e,
+			0x0020, 0x0050, 0x0061, 0x0072, 0x0074, 0x0069,
+			0x0074, 0x0069, 0x006f, 0x006e, },
+};
+
+/* String 2 "SimTrace DFU Interface - Bootloader Partition" */
+const struct USBStringDescriptor USBDFU_string2 = {
+	.hdr = {
+		.bLength = sizeof(USBGenericDescriptor) + 45 * sizeof(unsigned short),
+		.bDescriptorType = USBGenericDescriptor_STRING,
+	},
+	.wData = {	0x0053, 0x0069, 0x006d, 0x0054, 0x0072, 0x0061,
+			0x0063, 0x0065, 0x0020, 0x0044, 0x0046, 0x0055,
+			0x0020, 0x0049, 0x006e, 0x0074, 0x0065, 0x0072,
+			0x0066, 0x0061, 0x0063, 0x0065, 0x0020, 0x002d,
+			0x0020, 0x0042, 0x006f, 0x006f, 0x0074, 0x006c,
+			0x006f, 0x0061, 0x0064, 0x0065, 0x0072, 0x0020,
+			0x0050, 0x0061, 0x0072, 0x0074, 0x0069, 0x0074,
+			0x0069, 0x006f, 0x006e, },
+};
+
+/* String 3 "SimTrace DFU Interface - RAM" */
+const struct USBStringDescriptor USBDFU_string3 = {
+	.hdr = {
+		.bLength = sizeof(USBGenericDescriptor) + 28 * sizeof(unsigned short),
+		.bDescriptorType = USBGenericDescriptor_STRING,
+	},
+	.wData = {	0x0053, 0x0069, 0x006d, 0x0054, 0x0072, 0x0061,
+			0x0063, 0x0065, 0x0020, 0x0044, 0x0046, 0x0055,
+			0x0020, 0x0049, 0x006e, 0x0074, 0x0065, 0x0072,
+			0x0066, 0x0061, 0x0063, 0x0065, 0x0020, 0x002d,
+			0x0020, 0x0052, 0x0041, 0x004d, },
+};

firmware/atmel_softpack_libraries/usb/device/dfu/dfu.h

@@ -0,0 +1,131 @@
+#ifndef _USB_DEV_DFU_H
+#define _USB_DEV_DFU_H
+
+#include <stdint.h>
+#include <board.h>
+#include <usb/include/USBDescriptors.h>
+#include <usb/include/USBDDriver.h>
+
+#if 0
+/* This is valid for CCID */
+#define CONFIG_DFU_NUM_APP_IF	1
+#define CONFIG_DFU_NUM_APP_STR	4
+#else
+/* This is valid for CDC-Serial */
+#define CONFIG_DFU_NUM_APP_IF	2
+#define CONFIG_DFU_NUM_APP_STR	2
+#endif
+
+struct USBStringDescriptor {
+	USBGenericDescriptor hdr;
+	unsigned short wData[];
+} __attribute__((packed));
+
+
+#ifdef BOARD_USB_DFU
+
+#include <usb/common/dfu/usb_dfu.h>
+
+/* for board-specific config */
+#include <board.h>
+
+struct dfu_desc {
+	USBConfigurationDescriptor ucfg;
+	USBInterfaceDescriptor uif[BOARD_DFU_NUM_IF];
+	struct usb_dfu_func_descriptor func_dfu;
+} __attribute__ ((packed));
+
+/* USB DFU functional descriptor */
+#define DFU_FUNC_DESC  {						\
+	.bLength		= USB_DT_DFU_SIZE,			\
+	.bDescriptorType	= USB_DT_DFU,				\
+	.bmAttributes		= USB_DFU_CAN_UPLOAD | USB_DFU_CAN_DOWNLOAD, \
+	.wDetachTimeOut		= 0xff00,				\
+	.wTransferSize		= BOARD_DFU_PAGE_SIZE,			\
+	.bcdDFUVersion		= 0x0100,				\
+}
+
+/* Number of DFU interface during runtime mode */
+#define DFURT_NUM_IF		1
+
+/* to be used by the runtime as part of its USB descriptor structure
+ * declaration */
+#define DFURT_IF_DESCRIPTOR_STRUCT		\
+	USBInterfaceDescriptor	dfu_rt;		\
+	struct usb_dfu_func_descriptor func_dfu;
+
+/* to be used by the runtime as part of its USB Dsecriptor structure
+ * definition */
+#define DFURT_IF_DESCRIPTOR(dfuIF, dfuSTR)					\
+	.dfu_rt = {								\
+		.bLength 		= sizeof(USBInterfaceDescriptor),	\
+		.bDescriptorType	= USBGenericDescriptor_INTERFACE,	\
+		.bInterfaceNumber	= dfuIF,				\
+		.bAlternateSetting	= 0,					\
+		.bNumEndpoints		= 0,					\
+		.bInterfaceClass	= 0xFE,					\
+		.bInterfaceSubClass	= 0x01,					\
+		.bInterfaceProtocol	= 0x01,					\
+		.iInterface		= dfuSTR,				\
+	},									\
+	.func_dfu = DFU_FUNC_DESC						\
+
+/* provided by dfu_desc.c */
+extern const struct dfu_desc dfu_cfg_descriptor;
+extern const USBDDriverDescriptors dfu_descriptors;
+
+#else /* BOARD_USB_DFU */
+
+/* no DFU bootloader is being used */
+#define DFURT_NUM_IF	0
+#define DFURT_IF_DESCRIPTOR_STRUCT(a, b)
+#define DFURT_IF_DESCRIPTOR
+
+#endif /* BOARD_USB_DFU */
+
+/* magic value we use during boot to detect if we should start in DFU
+ * mode or runtime mode */
+#define USB_DFU_MAGIC	0xDFDFDFDF
+
+/* The API between the core DFU handler and the board/soc specific code */
+
+struct dfudata {
+	uint32_t magic;
+	uint8_t status;
+	uint32_t state;
+	int past_manifest;
+	unsigned int total_bytes;
+};
+
+/* RAM address for this magic value above */
+extern struct dfudata _g_dfu;
+extern struct dfudata *g_dfu;
+
+void set_usb_serial_str(const uint8_t *serial_usbstr);
+
+void DFURT_SwitchToDFU(void);
+
+/* call-backs from DFU USB function driver to the board/SOC */
+extern int USBDFU_handle_dnload(uint8_t altif, unsigned int offset,
+				uint8_t *data, unsigned int len);
+extern int USBDFU_handle_upload(uint8_t altif, unsigned int offset,
+				uint8_t *data, unsigned int req_len);
+
+/* function to be called at end of EP0 handler during runtime */
+void USBDFU_Runtime_RequestHandler(const USBGenericRequest *request);
+
+/* function to be called at end of EP0 handler during DFU mode */
+void USBDFU_DFU_RequestHandler(const USBGenericRequest *request);
+
+/* initialization of USB DFU driver (in DFU mode */
+void USBDFU_Initialize(const USBDDriverDescriptors *pDescriptors);
+
+/* USBD tells us to switch from DFU mode to application mode */
+void USBDFU_SwitchToApp(void);
+
+/* Return values to be used by USBDFU_handle_{dn,up}load */
+#define DFU_RET_NOTHING	0
+#define DFU_RET_ZLP	1
+#define DFU_RET_STALL	2
+
+#endif

firmware/atmel_softpack_libraries/usb/device/dfu/dfu_desc.c

@@ -0,0 +1,214 @@
+/* DFU related USB Descriptors */
+/* (C) 2006-2017 Harald Welte <hwelte@hmw-consulting.de> */
+
+#include <unistd.h>
+
+#include "board.h"
+#include "utils.h"
+
+#include <usb/include/USBDescriptors.h>
+
+#include <usb/include/USBDDriver.h>
+
+#include <usb/common/dfu/usb_dfu.h>
+#include <usb/device/dfu/dfu.h>
+
+enum {
+	STR_MANUF	= 1,
+	STR_PROD,
+	STR_CONFIG,
+	_STR_FIRST_ALT,
+	STR_SERIAL	= (_STR_FIRST_ALT+BOARD_DFU_NUM_IF),
+};
+
+static const USBDeviceDescriptor fsDevice = {
+	.bLength = 		sizeof(USBDeviceDescriptor),
+	.bDescriptorType = 	USBGenericDescriptor_DEVICE,
+	.bcdUSB = 		USBDeviceDescriptor_USB2_00,
+	.bDeviceClass =		0,
+	.bDeviceSubClass = 	0,
+	.bDeviceProtocol = 	0,
+	.bMaxPacketSize0 =	BOARD_USB_ENDPOINTS_MAXPACKETSIZE(0),
+	.idVendor =		BOARD_USB_VENDOR,
+	.idProduct = 		BOARD_USB_PRODUCT,
+	.bcdDevice = 		BOARD_USB_RELEASE,
+	.iManufacturer =	STR_MANUF,
+	.iProduct =		STR_PROD,
+#ifdef BOARD_USB_SERIAL
+	.iSerialNumber =	STR_SERIAL,
+#else
+	.iSerialNumber =	0,
+#endif
+	.bNumConfigurations =	1,
+};
+
+/* Alternate Interface Descriptor, we use one per partition/memory type */
+#define DFU_IF(ALT)								\
+	{									\
+		.bLength =		sizeof(USBInterfaceDescriptor),		\
+		.bDescriptorType = 	USBGenericDescriptor_INTERFACE,		\
+		.bInterfaceNumber =	0,					\
+		.bAlternateSetting =	ALT,					\
+		.bNumEndpoints =	0,					\
+		.bInterfaceClass =	0xfe,					\
+		.bInterfaceSubClass =	1,					\
+		.iInterface =		(_STR_FIRST_ALT+ALT),			\
+		.bInterfaceProtocol =	2,					\
+	}
+
+/* overall descriptor for the DFU configuration, including all
+ * descriptors for alternate interfaces */
+const struct dfu_desc dfu_cfg_descriptor = {
+	.ucfg = {
+		.bLength =	   sizeof(USBConfigurationDescriptor),
+		.bDescriptorType = USBGenericDescriptor_CONFIGURATION,
+		.wTotalLength =	   sizeof(struct dfu_desc),
+		.bNumInterfaces =  1,
+		.bConfigurationValue = 1,
+		.iConfiguration =  STR_CONFIG,
+		.bmAttributes =	   BOARD_USB_BMATTRIBUTES,
+		.bMaxPower =	   100,
+	},
+	.uif[0] = DFU_IF(0),
+#if BOARD_DFU_NUM_IF > 1
+	.uif[1] = DFU_IF(1),
+#endif
+#if BOARD_DFU_NUM_IF > 2
+	.uif[2] = DFU_IF(2),
+#endif
+#if BOARD_DFU_NUM_IF > 3
+	.uif[3] = DFU_IF(3),
+#endif
+#if BOARD_DFU_NUM_IF > 4
+	.uif[4] = DFU_IF(4),
+#endif
+	.func_dfu = DFU_FUNC_DESC
+};
+
+#if 0
+#include "usb_strings.h"
+
+
+static const unsigned char *usb_strings[] = {
+	USB_STRINGS_GENERATED
+#ifdef BOARD_USB_SERIAL
+	NULL
+#endif
+};
+
+void set_usb_serial_str(const uint8_t *serial_usbstr)
+{
+	usb_strings[STR_SERIAL] = serial_usbstr;
+}
+#else
+static const unsigned char langDesc[] = {
+	USBStringDescriptor_LENGTH(1),
+	USBGenericDescriptor_STRING,
+	USBStringDescriptor_ENGLISH_US
+};
+
+static const unsigned char manufStringDescriptor[] = {
+	USBStringDescriptor_LENGTH(24),
+	USBGenericDescriptor_STRING,
+	USBStringDescriptor_UNICODE('s'),
+	USBStringDescriptor_UNICODE('y'),
+	USBStringDescriptor_UNICODE('s'),
+	USBStringDescriptor_UNICODE('m'),
+	USBStringDescriptor_UNICODE('o'),
+	USBStringDescriptor_UNICODE('c'),
+	USBStringDescriptor_UNICODE('o'),
+	USBStringDescriptor_UNICODE('m'),
+	USBStringDescriptor_UNICODE(' '),
+	USBStringDescriptor_UNICODE('-'),
+	USBStringDescriptor_UNICODE(' '),
+	USBStringDescriptor_UNICODE('s'),
+	USBStringDescriptor_UNICODE('.'),
+	USBStringDescriptor_UNICODE('f'),
+	USBStringDescriptor_UNICODE('.'),
+	USBStringDescriptor_UNICODE('m'),
+	USBStringDescriptor_UNICODE('.'),
+	USBStringDescriptor_UNICODE('c'),
+	USBStringDescriptor_UNICODE('.'),
+	USBStringDescriptor_UNICODE(' '),
+	USBStringDescriptor_UNICODE('G'),
+	USBStringDescriptor_UNICODE('m'),
+	USBStringDescriptor_UNICODE('b'),
+	USBStringDescriptor_UNICODE('H'),
+};
+
+static const unsigned char productStringDescriptor[] = {
+	USBStringDescriptor_LENGTH(10),
+	USBGenericDescriptor_STRING,
+	USBStringDescriptor_UNICODE('S'),
+	USBStringDescriptor_UNICODE('I'),
+	USBStringDescriptor_UNICODE('M'),
+	USBStringDescriptor_UNICODE('t'),
+	USBStringDescriptor_UNICODE('r'),
+	USBStringDescriptor_UNICODE('a'),
+	USBStringDescriptor_UNICODE('c'),
+	USBStringDescriptor_UNICODE('e'),
+	USBStringDescriptor_UNICODE(' '),
+	USBStringDescriptor_UNICODE('2'),
+};
+
+
+static const unsigned char configStringDescriptor[] = {
+	USBStringDescriptor_LENGTH(3),
+	USBGenericDescriptor_STRING,
+	USBStringDescriptor_UNICODE('D'),
+	USBStringDescriptor_UNICODE('F'),
+	USBStringDescriptor_UNICODE('U'),
+};
+
+static const unsigned char altRamStringDescriptor[] = {
+	USBStringDescriptor_LENGTH(3),
+	USBGenericDescriptor_STRING,
+	USBStringDescriptor_UNICODE('R'),
+	USBStringDescriptor_UNICODE('A'),
+	USBStringDescriptor_UNICODE('M'),
+};
+
+static const unsigned char altAppStringDescriptor[] = {
+	USBStringDescriptor_LENGTH(11),
+	USBGenericDescriptor_STRING,
+	USBStringDescriptor_UNICODE('F'),
+	USBStringDescriptor_UNICODE('l'),
+	USBStringDescriptor_UNICODE('a'),
+	USBStringDescriptor_UNICODE('s'),
+	USBStringDescriptor_UNICODE('h'),
+	USBStringDescriptor_UNICODE(' '),
+	USBStringDescriptor_UNICODE('('),
+	USBStringDescriptor_UNICODE('A'),
+	USBStringDescriptor_UNICODE('p'),
+	USBStringDescriptor_UNICODE('p'),
+	USBStringDescriptor_UNICODE(')'),
+};
+
+/** List of string descriptors used by the device */
+static const unsigned char *usb_strings[] = {
+	langDesc,
+	[STR_MANUF] = manufStringDescriptor,
+	[STR_PROD] = productStringDescriptor,
+	[STR_CONFIG] = configStringDescriptor,
+	[_STR_FIRST_ALT] = altRamStringDescriptor,
+	[_STR_FIRST_ALT+1] = altAppStringDescriptor,
+};
+#endif
+
+static const USBConfigurationDescriptor *conf_desc_arr[] = {
+	&dfu_cfg_descriptor.ucfg,
+};
+
+const USBDDriverDescriptors dfu_descriptors = {
+	.pFsDevice = &fsDevice,
+	.pFsConfiguration = (const USBConfigurationDescriptor **)&conf_desc_arr,
+	/* DFU only supports FS for now */
+	.pFsQualifier = NULL,
+	.pFsOtherSpeed = NULL,
+	.pHsDevice = NULL,
+	.pHsConfiguration = NULL,
+	.pHsQualifier = NULL,
+	.pHsOtherSpeed = NULL,
+	.pStrings = usb_strings,
+	.numStrings = ARRAY_SIZE(usb_strings),
+};

firmware/atmel_softpack_libraries/usb/device/dfu/dfu_driver.c

@@ -0,0 +1,478 @@
+/* USB Device Firmware Update Implementation for OpenPCD, OpenPICC SIMtrace
+ * (C) 2006-2017 by Harald Welte <hwelte@hmw-consulting.de>
+ *
+ * This ought to be compliant to the USB DFU Spec 1.0 as available from
+ * http://www.usb.org/developers/devclass_docs/usbdfu10.pdf
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by 
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <unistd.h>
+
+#include <board.h>
+#include <core_cm3.h>
+
+#include "trace.h"
+
+#include <usb/include/USBDescriptors.h>
+#include <usb/include/USBRequests.h>
+#include <usb/include/USBD.h>
+#include <usb/common/dfu/usb_dfu.h>
+#include <usb/device/dfu/dfu.h>
+
+/* FIXME: this was used for a special ELF section which then got called
+ * by DFU code and Application code, across flash partitions */
+#define __dfudata __attribute__ ((section (".dfudata")))
+#define __dfufunc
+
+/// Standard device driver instance.
+static USBDDriver usbdDriver;
+static unsigned char if_altsettings[1];
+
+__dfudata struct dfudata _g_dfu = {
+  	.state = DFU_STATE_appIDLE,
+	.past_manifest = 0,
+	.total_bytes = 0,
+};
+struct dfudata *g_dfu = &_g_dfu;
+
+WEAK void dfu_drv_updstatus(void)
+{
+	TRACE_INFO("DFU: updstatus()\n\r");
+
+	/* we transition immediately from MANIFEST_SYNC to MANIFEST,
+	 * as the flash-writing is not asynchronous in this
+	 * implementation */
+	if (g_dfu->state == DFU_STATE_dfuMANIFEST_SYNC)
+		g_dfu->state = DFU_STATE_dfuMANIFEST;
+}
+
+static __dfufunc void handle_getstatus(void)
+{
+	/* has to be static as USBD_Write is async ? */
+	static struct dfu_status dstat;
+	static const uint8_t poll_timeout_10ms[] = { 10, 0, 0 };
+
+	dfu_drv_updstatus();
+
+	/* send status response */
+	dstat.bStatus = g_dfu->status;
+	dstat.bState = g_dfu->state;
+	dstat.iString = 0;
+	memcpy(&dstat.bwPollTimeout, poll_timeout_10ms, sizeof(dstat.bwPollTimeout));
+
+	TRACE_DEBUG("handle_getstatus(%u, %u)\n\r", dstat.bStatus, dstat.bState);
+
+	USBD_Write(0, (char *)&dstat, sizeof(dstat), NULL, 0);
+}
+
+static void __dfufunc handle_getstate(void)
+{
+	uint8_t u8 = g_dfu->state;
+
+	TRACE_DEBUG("handle_getstate(%u)\n\r", g_dfu->state);
+
+	USBD_Write(0, (char *)&u8, sizeof(u8), NULL, 0);
+}
+
+static void TerminateCtrlInWithNull(void *pArg,
+                                    unsigned char status,
+                                    unsigned long int transferred,
+                                    unsigned long int remaining)
+{
+    USBD_Write(0, // Endpoint #0
+               0, // No data buffer
+               0, // No data buffer
+               (TransferCallback) 0,
+               (void *)  0);
+}
+
+static uint8_t dfu_buf[BOARD_DFU_PAGE_SIZE];
+
+/* download of a single page has completed */
+static void dnload_cb(void *arg, unsigned char status, unsigned long int transferred,
+		      unsigned long int remaining)
+{
+	int rc;
+
+	TRACE_DEBUG("COMPLETE\n\r");
+
+	if (status != USBD_STATUS_SUCCESS) {
+		TRACE_ERROR("USBD download callback status %d\n\r", status);
+		USBD_Stall(0);
+		return;
+	}
+
+	rc = USBDFU_handle_dnload(if_altsettings[0], g_dfu->total_bytes, dfu_buf, transferred);
+	switch (rc) {
+	case DFU_RET_ZLP:
+		g_dfu->total_bytes += transferred;
+		g_dfu->state = DFU_STATE_dfuDNLOAD_IDLE;
+		TerminateCtrlInWithNull(0,0,0,0);
+		break;
+	case DFU_RET_STALL:
+		g_dfu->state = DFU_STATE_dfuERROR;
+		USBD_Stall(0);
+		break;
+	case DFU_RET_NOTHING:
+		break;
+	}
+
+}
+
+static int handle_dnload(uint16_t val, uint16_t len, int first)
+{
+	int rc;
+
+	if (len > BOARD_DFU_PAGE_SIZE) {
+		TRACE_ERROR("DFU length exceeds flash page size\n\r");
+		g_dfu->state = DFU_STATE_dfuERROR;
+		g_dfu->status = DFU_STATUS_errADDRESS;
+		return DFU_RET_STALL;
+	}
+
+	if (len & 0x03) {
+		TRACE_ERROR("DFU length not four-byte-aligned\n\r");
+		g_dfu->state = DFU_STATE_dfuERROR;
+		g_dfu->status = DFU_STATUS_errADDRESS;
+		return DFU_RET_STALL;
+	}
+
+	if (first)
+		g_dfu->total_bytes = 0;
+
+	if (len == 0) {
+		TRACE_DEBUG("zero-size write -> MANIFEST_SYNC\n\r");
+		g_dfu->state = DFU_STATE_dfuMANIFEST_SYNC;
+		return DFU_RET_ZLP;
+	}
+
+	/* else: actually read data */
+	rc = USBD_Read(0, dfu_buf, len, &dnload_cb, 0);
+	if (rc == USBD_STATUS_SUCCESS)
+		return DFU_RET_NOTHING;
+	else
+		return DFU_RET_STALL;
+}
+
+/* upload of a single page has completed */
+static void upload_cb(void *arg, unsigned char status, unsigned long int transferred,
+		      unsigned long int remaining)
+{
+	int rc;
+
+	TRACE_DEBUG("COMPLETE\n\r");
+
+	if (status != USBD_STATUS_SUCCESS) {
+		TRACE_ERROR("USBD upload callback status %d\n\r", status);
+		USBD_Stall(0);
+		return;
+	}
+
+	g_dfu->total_bytes += transferred;
+}
+
+static int handle_upload(uint16_t val, uint16_t len, int first)
+{
+	int rc;
+
+	if (first)
+		g_dfu->total_bytes = 0;
+
+	if (len > BOARD_DFU_PAGE_SIZE) {
+		TRACE_ERROR("DFU length exceeds flash page size\n\r");
+		g_dfu->state = DFU_STATE_dfuERROR;
+		g_dfu->status = DFU_STATUS_errADDRESS;
+		return DFU_RET_STALL;
+	}
+
+	rc = USBDFU_handle_upload(if_altsettings[0], g_dfu->total_bytes, dfu_buf, len);
+	if (rc < 0) {
+		TRACE_ERROR("application handle_upload() returned %d\n\r", rc);
+		return DFU_RET_STALL;
+	}
+
+	if (USBD_Write(0, dfu_buf, rc, &upload_cb, 0) == USBD_STATUS_SUCCESS)
+		return rc;
+
+	return DFU_RET_STALL;
+}
+
+/* this function gets daisy-chained into processing EP0 requests */
+void USBDFU_DFU_RequestHandler(const USBGenericRequest *request)
+{
+	uint8_t req = USBGenericRequest_GetRequest(request);
+	uint16_t len = USBGenericRequest_GetLength(request);
+	uint16_t val = USBGenericRequest_GetValue(request);
+	int rc, ret;
+
+	TRACE_DEBUG("type=0x%x, recipient=0x%x val=0x%x len=%u\n\r",
+			USBGenericRequest_GetType(request),
+			USBGenericRequest_GetRecipient(request),
+			val, len);
+
+	/* check for GET_DESCRIPTOR on DFU */
+	if (USBGenericRequest_GetType(request) == USBGenericRequest_STANDARD &&
+	    USBGenericRequest_GetRecipient(request) == USBGenericRequest_DEVICE &&
+	    USBGenericRequest_GetRequest(request) == USBGenericRequest_GETDESCRIPTOR &&
+	    USBGetDescriptorRequest_GetDescriptorType(request) == USB_DT_DFU) {
+		uint16_t length = sizeof(struct usb_dfu_func_descriptor);
+		const USBDeviceDescriptor *pDevice;
+		int terminateWithNull;
+
+		if (USBD_IsHighSpeed())
+			pDevice = usbdDriver.pDescriptors->pHsDevice;
+		else
+			pDevice = usbdDriver.pDescriptors->pFsDevice;
+
+		terminateWithNull = ((length % pDevice->bMaxPacketSize0) == 0);
+		USBD_Write(0, &dfu_cfg_descriptor.func_dfu, length,
+			   terminateWithNull ? TerminateCtrlInWithNull : 0, 0);
+		return;
+	}
+
+	/* forward all non-DFU specific messages to core handler*/
+	if (USBGenericRequest_GetType(request) != USBGenericRequest_CLASS ||
+	    USBGenericRequest_GetRecipient(request) != USBGenericRequest_INTERFACE) {
+		TRACE_DEBUG("std_ho_usbd ");
+		USBDDriver_RequestHandler(&usbdDriver, request);
+		return;
+	}
+
+	switch (g_dfu->state) {
+	case DFU_STATE_appIDLE:
+	case DFU_STATE_appDETACH:
+		TRACE_ERROR("Invalid DFU State reached in DFU mode\r\n");
+		ret = DFU_RET_STALL;
+		break;
+	case DFU_STATE_dfuIDLE:
+		switch (req) {
+		case USB_REQ_DFU_DNLOAD:
+			if (len == 0) {
+				g_dfu->state = DFU_STATE_dfuERROR;
+				ret = DFU_RET_STALL;
+				goto out;
+			}
+			g_dfu->state = DFU_STATE_dfuDNLOAD_SYNC;
+			ret = handle_dnload(val, len, 1);
+			break;
+		case USB_REQ_DFU_UPLOAD:
+			g_dfu->state = DFU_STATE_dfuUPLOAD_IDLE;
+			handle_upload(val, len, 1);
+			break;
+		case USB_REQ_DFU_ABORT:
+			/* no zlp? */
+			ret = DFU_RET_ZLP;
+			break;
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		default:
+			g_dfu->state = DFU_STATE_dfuERROR;
+			ret = DFU_RET_STALL;
+			goto out;
+			break;
+		}
+		break;
+	case DFU_STATE_dfuDNLOAD_SYNC:
+		switch (req) {
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			/* FIXME: state transition depending on block completeness */
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		default:
+			g_dfu->state = DFU_STATE_dfuERROR;
+			ret = DFU_RET_STALL;
+			goto out;
+		}
+		break;
+	case DFU_STATE_dfuDNBUSY:
+		switch (req) {
+		case USB_REQ_DFU_GETSTATUS:
+			/* FIXME: only accept getstatus if bwPollTimeout
+			 * has elapsed */
+			handle_getstatus();
+			break;
+		default:
+			g_dfu->state = DFU_STATE_dfuERROR;
+			ret = DFU_RET_STALL;
+			goto out;
+		}
+		break;
+	case DFU_STATE_dfuDNLOAD_IDLE:
+		switch (req) {
+		case USB_REQ_DFU_DNLOAD:
+			g_dfu->state = DFU_STATE_dfuDNLOAD_SYNC;
+			ret = handle_dnload(val, len, 0);
+			break;
+		case USB_REQ_DFU_ABORT:
+			g_dfu->state = DFU_STATE_dfuIDLE;
+			ret = DFU_RET_ZLP;
+			break;
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		default:
+			g_dfu->state = DFU_STATE_dfuERROR;
+			ret = DFU_RET_STALL;
+			break;
+		}
+		break;
+	case DFU_STATE_dfuMANIFEST_SYNC:
+		switch (req) {
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		default:
+			g_dfu->state = DFU_STATE_dfuERROR;
+			ret = DFU_RET_STALL;
+			break;
+		}
+		break;
+	case DFU_STATE_dfuMANIFEST:
+		switch (req) {
+		case USB_REQ_DFU_GETSTATUS:
+			/* we don't want to change to WAIT_RST, as it
+			 * would mean that we can not support another
+			 * DFU transaction before doing the actual
+			 * reset.  Instead, we switch to idle and note
+			 * that we've already been through MANIFST in
+			 * the global variable 'past_manifest'.
+			 */
+			//g_dfu->state = DFU_STATE_dfuMANIFEST_WAIT_RST;
+			g_dfu->state = DFU_STATE_dfuIDLE;
+			g_dfu->past_manifest = 1;
+			handle_getstatus();
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		default:
+			g_dfu->state = DFU_STATE_dfuERROR;
+			ret = DFU_RET_STALL;
+			break;
+		}
+		break;
+	case DFU_STATE_dfuMANIFEST_WAIT_RST:
+		/* we should never go here */
+		break;
+	case DFU_STATE_dfuUPLOAD_IDLE:
+		switch (req) {
+		case USB_REQ_DFU_UPLOAD:
+			/* state transition if less data then requested */
+			rc = handle_upload(val, len, 0);
+			if (rc >= 0 && rc < len)
+				g_dfu->state = DFU_STATE_dfuIDLE;
+			break;
+		case USB_REQ_DFU_ABORT:
+			g_dfu->state = DFU_STATE_dfuIDLE;
+			/* no zlp? */
+			ret = DFU_RET_ZLP;
+			break;
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		default:
+			g_dfu->state = DFU_STATE_dfuERROR;
+			ret = DFU_RET_STALL;
+			break;
+		}
+		break;
+	case DFU_STATE_dfuERROR:
+		switch (req) {
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		case USB_REQ_DFU_CLRSTATUS:
+			g_dfu->state = DFU_STATE_dfuIDLE;
+			g_dfu->status = DFU_STATUS_OK;
+			/* no zlp? */
+			ret = DFU_RET_ZLP;
+			break;
+		default:
+			g_dfu->state = DFU_STATE_dfuERROR;
+			ret = DFU_RET_STALL;
+			break;
+		}
+		break;
+	}
+
+out:
+	switch (ret) {
+	case DFU_RET_NOTHING:
+		break;
+	case DFU_RET_ZLP:
+		USBD_Write(0, 0, 0, 0, 0);
+		break;
+	case DFU_RET_STALL:
+		USBD_Stall(0);
+		break;
+	}
+}
+
+/* we assume the caller has enabled the required clock/PLL for USB */
+void USBDFU_Initialize(const USBDDriverDescriptors *pDescriptors)
+{
+	/* We already start in DFU idle mode */
+	g_dfu->state = DFU_STATE_dfuIDLE;
+
+	USBDDriver_Initialize(&usbdDriver, pDescriptors, if_altsettings);
+	USBD_Init();
+	USBD_Connect();
+	//USBD_ConfigureSpeed(1);
+
+	NVIC_EnableIRQ(UDP_IRQn);
+}
+
+void USBDFU_SwitchToApp(void)
+{
+	/* make sure the MAGIC is not set to enter DFU again */
+	g_dfu->magic = 0;
+
+	printf("switching to app\r\n");
+
+	/* disconnect from USB to ensure re-enumeration */
+	USBD_Disconnect();
+
+	/* disable any interrupts during transition */
+	__disable_irq();
+
+	/* Tell the hybrid to execute FTL JUMP! */
+	NVIC_SystemReset();
+}
+
+void USBDCallbacks_RequestReceived(const USBGenericRequest *request)
+{
+	USBDFU_DFU_RequestHandler(request);
+}

firmware/atmel_softpack_libraries/usb/device/dfu/dfu_runtime.c

@@ -0,0 +1,200 @@
+/* DFU related functions that are active at runtime, i.e. during the
+ * normal operation of the device firmware, *not* during DFU update mode
+ * (C) 2006 Harald Welte <hwelte@hmw-consulting.de>
+ *
+ * This ought to be compliant to the USB DFU Spec 1.0 as available from
+ * http://www.usb.org/developers/devclass_docs/usbdfu10.pdf
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by 
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <board.h>
+#include <core_cm3.h>
+
+#include <usb/include/USBD.h>
+#include <usb/device/dfu/dfu.h>
+
+#include "trace.h"
+
+#include <usb/include/USBDescriptors.h>
+#include <usb/include/USBRequests.h>
+#include <usb/include/USBD.h>
+#include <usb/common/dfu/usb_dfu.h>
+#include <usb/device/dfu/dfu.h>
+
+struct dfudata *g_dfu = (struct dfudata *) IRAM_ADDR;
+
+/* FIXME: this was used for a special ELF section which then got called
+ * by DFU code and Application code, across flash partitions */
+#define __dfufunc
+
+static __dfufunc void handle_getstatus(void)
+{
+	/* has to be static as USBD_Write is async ? */
+	static struct dfu_status dstat;
+	static const uint8_t poll_timeout_10ms[] = { 10, 0, 0 };
+
+	/* send status response */
+	dstat.bStatus = g_dfu->status;
+	dstat.bState = g_dfu->state;
+	dstat.iString = 0;
+	memcpy(&dstat.bwPollTimeout, poll_timeout_10ms, sizeof(dstat.bwPollTimeout));
+
+	TRACE_DEBUG("handle_getstatus(%u, %u)\n\r", dstat.bStatus, dstat.bState);
+
+	USBD_Write(0, (char *)&dstat, sizeof(dstat), NULL, 0);
+}
+
+static void __dfufunc handle_getstate(void)
+{
+	uint8_t u8 = g_dfu->state;
+
+	TRACE_DEBUG("handle_getstate(%u)\n\r", g_dfu->state);
+
+	USBD_Write(0, (char *)&u8, sizeof(u8), NULL, 0);
+}
+
+static void TerminateCtrlInWithNull(void *pArg,
+                                    unsigned char status,
+                                    unsigned long int transferred,
+                                    unsigned long int remaining)
+{
+    USBD_Write(0, // Endpoint #0
+               0, // No data buffer
+               0, // No data buffer
+               (TransferCallback) 0,
+               (void *)  0);
+}
+
+/* this function gets daisy-chained into processing EP0 requests */
+void USBDFU_Runtime_RequestHandler(const USBGenericRequest *request)
+{
+	USBDDriver *usbdDriver = USBD_GetDriver();
+	uint8_t req = USBGenericRequest_GetRequest(request);
+	uint16_t len = USBGenericRequest_GetLength(request);
+	uint16_t val = USBGenericRequest_GetValue(request);
+	int rc, ret;
+
+	TRACE_DEBUG("type=0x%x, recipient=0x%x val=0x%x len=%u\n\r",
+			USBGenericRequest_GetType(request),
+			USBGenericRequest_GetRecipient(request),
+			val, len);
+
+	/* check for GET_DESCRIPTOR on DFU */
+	if (USBGenericRequest_GetType(request) == USBGenericRequest_STANDARD &&
+	    USBGenericRequest_GetRecipient(request) == USBGenericRequest_DEVICE &&
+	    USBGenericRequest_GetRequest(request) == USBGenericRequest_GETDESCRIPTOR &&
+	    USBGetDescriptorRequest_GetDescriptorType(request) == USB_DT_DFU) {
+		uint16_t length = sizeof(struct usb_dfu_func_descriptor);
+		const USBDeviceDescriptor *pDevice;
+		int terminateWithNull;
+
+		if (USBD_IsHighSpeed())
+			pDevice = usbdDriver->pDescriptors->pHsDevice;
+		else
+			pDevice = usbdDriver->pDescriptors->pFsDevice;
+
+		terminateWithNull = ((length % pDevice->bMaxPacketSize0) == 0);
+		USBD_Write(0, &dfu_cfg_descriptor.func_dfu, length,
+			   terminateWithNull ? TerminateCtrlInWithNull : 0, 0);
+		return;
+	}
+
+	/* forward all non-DFU specific messages to core handler*/
+	if (USBGenericRequest_GetType(request) != USBGenericRequest_CLASS ||
+	    USBGenericRequest_GetRecipient(request) != USBGenericRequest_INTERFACE) {
+		TRACE_DEBUG("std_ho_usbd ");
+		USBDDriver_RequestHandler(usbdDriver, request);
+		return;
+	}
+
+	switch (g_dfu->state) {
+	case DFU_STATE_appIDLE:
+		switch (req) {
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		case USB_REQ_DFU_DETACH:
+			/* we switch it DETACH state, send a ZLP and
+			 * return.  The next USB reset in this state
+			 * will then trigger DFURT_SwitchToDFU() below */
+			TRACE_DEBUG("\r\n====dfu_detach\n\r");
+			g_dfu->state = DFU_STATE_appDETACH;
+			ret = DFU_RET_ZLP;
+			goto out;
+			break;
+		default:
+			ret = DFU_RET_STALL;
+		}
+		break;
+	case DFU_STATE_appDETACH:
+		switch (req) {
+		case USB_REQ_DFU_GETSTATUS:
+			handle_getstatus();
+			break;
+		case USB_REQ_DFU_GETSTATE:
+			handle_getstate();
+			break;
+		default:
+			g_dfu->state = DFU_STATE_appIDLE;
+			ret = DFU_RET_STALL;
+			goto out;
+			break;
+		}
+		/* FIXME: implement timer to return to appIDLE */
+		break;
+	default:
+		TRACE_ERROR("Invalid DFU State reached in Runtime Mode\r\n");
+		ret = DFU_RET_STALL;
+		break;
+	}
+
+out:
+	switch (ret) {
+	case DFU_RET_NOTHING:
+		break;
+	case DFU_RET_ZLP:
+		USBD_Write(0, 0, 0, 0, 0);
+		break;
+	case DFU_RET_STALL:
+		USBD_Stall(0);
+		break;
+	}
+}
+
+void DFURT_SwitchToDFU(void)
+{
+	/* store the magic value that the DFU loader can detect and
+	 * activate itself, rather than boot into the application */
+	g_dfu->magic = USB_DFU_MAGIC;
+
+	/* Disconnect the USB by remoting the pull-up */
+	USBD_Disconnect();
+	__disable_irq();
+
+	/* reset the processor, we will start execution with the
+	 * ResetVector of the bootloader */
+	NVIC_SystemReset();
+}
+
+void USBDCallbacks_RequestReceived(const USBGenericRequest *request)
+{
+	/* FIXME: integration with CCID control point reqeusts */
+	USBDFU_Runtime_RequestHandler(request);
+}

firmware/libboard/common/include/board_common.h

@@ -0,0 +1,122 @@
+#ifndef _BOARD_
+#define _BOARD_
+
+/**     Headers     */
+#include "chip.h"
+/* We need this for a nop instruction in USB_HAL.c */
+#define __CC_ARM
+
+/**     Board       */
+#include "board_lowlevel.h"
+#include "uart_console.h"
+#include "iso7816_4.h"
+#include "led.h"
+#include "cciddriver.h"
+#include "usart.h"
+#include "USBD.h"
+
+#include "USBD_Config.h"
+#include "USBDDriver.h"
+
+/**     Highlevel   */
+#include "trace.h"
+#include "stdio.h"
+#include "stdlib.h"
+#include "string.h"
+#include "inttypes.h"
+#include "syscalls.h"
+
+#define MIN(a, b)       ((a < b) ? a : b)
+
+#ifdef __GNUC__ 
+#undef __GNUC__ 
+#endif
+
+/** Family definition (already defined) */
+#define sam3s
+/** Core definition */
+#define cortexm3
+
+#define BOARD_MCK     48000000
+
+#define LED_RED PIO_PA17
+#define LED_GREEN PIO_PA18
+
+#define PIN_LED_RED     {LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+#define PIN_LED_GREEN   {LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+#define PINS_LEDS       PIN_LED_RED, PIN_LED_GREEN 
+
+#define LED_NUM_RED     0
+#define LED_NUM_GREEN   1
+
+/** USART0 pin RX */
+#define PIN_USART0_RXD    {PIO_PA9A_URXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+/** USART0 pin TX */
+#define PIN_USART0_TXD    {PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+
+#define BOARD_PIN_USART_RXD     PIN_USART0_RXD
+#define BOARD_PIN_USART_TXD     PIN_USART0_TXD
+
+#define BOARD_ID_USART          ID_USART0
+#define BOARD_USART_BASE        USART0
+
+#define PINS_UART  { PIO_PA9A_URXD0|PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+
+/** UART0 */
+/** Console baudrate always using 115200. */
+#define CONSOLE_BAUDRATE    115200
+/** Usart Hw interface used by the console (UART0). */
+#define CONSOLE_USART       UART0
+/** Usart Hw ID used by the console (UART0). */
+#define CONSOLE_ID          ID_UART0
+/** Pins description corresponding to Rxd,Txd, (UART pins) */
+#define CONSOLE_PINS        {PINS_UART}
+
+/// Smartcard detection pin
+// FIXME: add connect pin as iso pin...should it be periph b or interrupt oder input?
+#define BOARD_ISO7816_BASE_USART    USART0
+#define BOARD_ISO7816_ID_USART      ID_USART0
+
+#define USART_SIM       USART0
+#define ID_USART_SIM    ID_USART0
+#define USART_PHONE       USART1
+#define ID_USART_PHONE    ID_USART1
+
+#define SIM_PWEN        PIO_PA5
+#define VCC_FWD         PIO_PA26
+
+
+//**     USB **/
+// USB pull-up control pin definition (PA16).
+// Default: 1 (USB Pullup deactivated) 
+#define PIN_USB_PULLUP  {1 << 16, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+
+// Board has UDP controller
+#define BOARD_USB_UDP
+// D+ has external pull-up
+#define BOARD_USB_PULLUP_EXTERNAL
+
+#define BOARD_USB_NUMENDPOINTS      8
+
+// FIXME: in all other cases return 0?
+#define BOARD_USB_ENDPOINTS_MAXPACKETSIZE(i)    (((i == 4) || (i == 5))? 512 : 64)
+#define BOARD_USB_ENDPOINTS_BANKS(i)            (((i == 0) || (i == 3)) ? 1 : 2)
+
+/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
+//#define BOARD_USB_BMATTRIBUTES                  USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
+#define BOARD_USB_BMATTRIBUTES                  USBConfigurationDescriptor_BUSPOWERED_NORWAKEUP
+//#define BOARD_USB_BMATTRIBUTES                  USBConfigurationDescriptor_SELFPOWERED_RWAKEUP
+
+#define BOARD_USB_VENDOR	SIMTRACE_VENDOR_ID
+#define BOARD_USB_PRODUCT	SIMTRACE_PRODUCT_ID
+#define BOARD_USB_RELEASE	0
+
+#define BOARD_USB_DFU
+#define BOARD_DFU_BOOT_SIZE	(16 * 1024)
+#define BOARD_DFU_RAM_SIZE	(2 * 1024)
+#define BOARD_DFU_PAGE_SIZE	512
+#define BOARD_DFU_NUM_IF	2
+
+extern void board_exec_dbg_cmd(int ch);
+extern void board_main_top(void);
+#endif

firmware/libboard/common/include/boardver_adc.h

@@ -0,0 +1,3 @@
+#pragma once
+
+int get_board_version_adc(void);

firmware/libboard/common/include/manifest.h

@@ -0,0 +1,10 @@
+
+#ifndef _MANIFEST_H
+#define _MANIFEST_H
+
+extern const char *manifest_application;
+extern const char *manifest_revision;
+extern const char *manifest_board;
+extern const char *manifest_environment;
+
+#endif /* !_MANIFEST_H */

firmware/libboard/common/resources/sam3s1/flash.ld

@@ -0,0 +1,142 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------
+ *      Linker script for running in internal FLASH on the ATSAM3S1
+ *----------------------------------------------------------------------------*/
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+SEARCH_DIR(.)
+
+/* Memory Spaces Definitions */
+MEMORY
+{
+	rom (rx)  : ORIGIN = 0x00400000, LENGTH = 0x00010000 /* Flash, 64K */
+	ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00004000 /* sram, 16K */
+}
+
+/* Section Definitions */ 
+SECTIONS 
+{ 
+    .text : 
+    { 
+        . = ALIGN(4);
+        _sfixed = .;
+        KEEP(*(.vectors .vectors.*))
+        *(.text .text.* .gnu.linkonce.t.*) 	      
+        *(.glue_7t) *(.glue_7)		                
+        *(.rodata .rodata* .gnu.linkonce.r.*)		    	                  
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+
+        /* Support C constructors, and C destructors in both user code
+           and the C library. This also provides support for C++ code. */
+        . = ALIGN(4);
+        KEEP(*(.init))
+        . = ALIGN(4);
+        __preinit_array_start = .;
+        KEEP (*(.preinit_array))
+        __preinit_array_end = .;
+
+        . = ALIGN(4);
+        __init_array_start = .;
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array))
+        __init_array_end = .;
+
+        . = ALIGN(0x4);
+        KEEP (*crtbegin.o(.ctors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+        KEEP (*(SORT(.ctors.*)))
+        KEEP (*crtend.o(.ctors))
+
+        . = ALIGN(4);
+        KEEP(*(.fini))
+
+        . = ALIGN(4);
+        __fini_array_start = .;
+        KEEP (*(.fini_array))
+        KEEP (*(SORT(.fini_array.*)))
+        __fini_array_end = .;
+
+        KEEP (*crtbegin.o(.dtors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+        KEEP (*(SORT(.dtors.*)))
+        KEEP (*crtend.o(.dtors))
+
+        . = ALIGN(4);
+        _efixed = .;            /* End of text section */
+    } > rom
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    PROVIDE_HIDDEN (__exidx_start = .);
+    .ARM.exidx :
+    {
+      *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > rom
+    PROVIDE_HIDDEN (__exidx_end = .);
+
+    . = ALIGN(4); 
+    _etext = .;
+
+    .relocate : AT (_etext)
+    {
+        . = ALIGN(4);
+        _srelocate = .;
+        /* we must make sure the .dfudata is linked to start of RAM */
+        *(.dfudata .dfudata.*);
+        *(.ramfunc .ramfunc.*);
+        *(.data .data.*);
+        . = ALIGN(4);
+        _erelocate = .;
+    } > ram
+
+    /* .bss section which is used for uninitialized data */ 
+    .bss (NOLOAD) :
+    { 
+        . = ALIGN(4);
+        _sbss = . ;
+        _szero = .;
+        *(.bss .bss.*)
+        *(COMMON)
+        . = ALIGN(4);
+        _ebss = . ;
+        _ezero = .;
+    } > ram
+
+    /* stack section */
+    .stack (NOLOAD):
+    {
+        . = ALIGN(8);
+        *(.stack .stack.*)
+    } > ram
+
+    . = ALIGN(4); 
+    _end = . ; 
+}

firmware/libboard/common/resources/sam3s1/sram.ld

@@ -0,0 +1,140 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------
+ *      Linker script for running in internal SRAM on the ATSAM3S1
+ *----------------------------------------------------------------------------*/
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+SEARCH_DIR(.)
+
+/* Memory Spaces Definitions */
+MEMORY
+{
+	rom (rx)  : ORIGIN = 0x00400000, LENGTH = 0x00010000 /* Flash, 64K */
+	ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00004000 /* sram, 16K */
+}
+
+/* Section Definitions */ 
+SECTIONS 
+{ 
+    .text : 
+    { 
+        . = ALIGN(4);
+        _sfixed = .;
+        KEEP(*(.vectors .vectors.*))
+        *(.text .text.* .gnu.linkonce.t.*) 	      
+        *(.glue_7t) *(.glue_7)		                
+        *(.rodata .rodata* .gnu.linkonce.r.*)		    	                  
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+
+        /* Support C constructors, and C destructors in both user code
+           and the C library. This also provides support for C++ code. */
+        . = ALIGN(4);
+        KEEP(*(.init))
+        . = ALIGN(4);
+        __preinit_array_start = .;
+        KEEP (*(.preinit_array))
+        __preinit_array_end = .;
+
+        . = ALIGN(4);
+        __init_array_start = .;
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array))
+        __init_array_end = .;
+
+        . = ALIGN(0x4);
+        KEEP (*crtbegin.o(.ctors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+        KEEP (*(SORT(.ctors.*)))
+        KEEP (*crtend.o(.ctors))
+
+        . = ALIGN(4);
+        KEEP(*(.fini))
+
+        . = ALIGN(4);
+        __fini_array_start = .;
+        KEEP (*(.fini_array))
+        KEEP (*(SORT(.fini_array.*)))
+        __fini_array_end = .;
+
+        KEEP (*crtbegin.o(.dtors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+        KEEP (*(SORT(.dtors.*)))
+        KEEP (*crtend.o(.dtors))
+
+        . = ALIGN(4);
+        _efixed = .;            /* End of text section */
+    } > ram
+
+    . = ALIGN(4); 
+    _etext = .;
+
+    .relocate : AT (_etext)
+    {
+        . = ALIGN(4);
+        _srelocate = .;
+        *(.ramfunc .ramfunc.*);
+        *(.data .data.*);
+        . = ALIGN(4);
+        _erelocate = .;
+    } > ram
+
+    /* .bss section which is used for uninitialized data */ 
+    .bss (NOLOAD) :
+    { 
+        . = ALIGN(4);
+        _sbss = . ;
+        _szero = .;
+        *(.bss .bss.*)
+        *(COMMON)
+        . = ALIGN(4);
+        _ebss = . ;
+        _ezero = .;
+    } > ram
+
+    /* stack section */
+    .stack (NOLOAD):
+    {
+        . = ALIGN(8);
+        *(.stack .stack.*)
+    } > ram
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    PROVIDE_HIDDEN (__exidx_start = .);
+    .ARM.exidx :
+    {
+      *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > ram
+    PROVIDE_HIDDEN (__exidx_end = .);
+
+    . = ALIGN(4); 
+    _end = . ; 
+}

firmware/libboard/common/resources/sam3s1/sram_samba.lds

@@ -0,0 +1,91 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------
+ *      Linker script for running in internal SRAM on the AT91SAM3S1
+ *----------------------------------------------------------------------------*/
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(entry)
+
+/* Memory Spaces Definitions */
+MEMORY
+{
+    romcodesram (W!RX) : ORIGIN = 0x20000000, LENGTH = 0x0800
+    sram (W!RX) : ORIGIN = 0x20000800, LENGTH = 0x00003800 /* sram, 16K - sizeof(romcodesram) */
+}
+
+/* Entry point */
+/*ENTRY (ResetException)*/
+
+SECTIONS
+{
+    /* startup code in the .isr_vector */
+    .text :
+    {
+        . = ALIGN(4);
+        _stext = .;
+        KEEP(*(.isr_vector .isr_vector.*))
+        *(.mailbox)
+        *(.text .text.*)
+        *(.rodata .rodata.*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gcc_except_table)
+        *(.rodata .rodata*)
+        *(.gnu.linkonce.r.*)
+        . = ALIGN(4);
+        _etext = .;
+    } > sram
+
+    /* data */
+    .data :
+    {
+        . = ALIGN(4);
+        _sidata = .;
+        _sdata = .;
+
+        *(.data)
+        *(.data.*)
+        . = ALIGN(4);
+        _edata = .;
+    } > sram
+
+    .bss (NOLOAD) : {
+        _szero = .;
+        *(.bss)
+        . = ALIGN(4);
+        _ezero = .;
+    } >sram
+
+    /* Stack in SRAM */
+    _sstack = 0x20003FFC;
+}
+end = .;

firmware/libboard/common/resources/sam3s2/flash.ld

@@ -0,0 +1,142 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------
+ *      Linker script for running in internal FLASH on the ATSAM3S2
+ *----------------------------------------------------------------------------*/
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+SEARCH_DIR(.)
+
+/* Memory Spaces Definitions */
+MEMORY
+{
+	rom (rx)  : ORIGIN = 0x00400000, LENGTH = 0x00020000 /* flash, 128K */
+	ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 /* sram, 32K */
+}
+
+/* Section Definitions */ 
+SECTIONS 
+{ 
+    .text : 
+    { 
+        . = ALIGN(4);
+        _sfixed = .;
+        KEEP(*(.vectors .vectors.*))
+        *(.text .text.* .gnu.linkonce.t.*) 	      
+        *(.glue_7t) *(.glue_7)		                
+        *(.rodata .rodata* .gnu.linkonce.r.*)		    	                  
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+
+        /* Support C constructors, and C destructors in both user code
+           and the C library. This also provides support for C++ code. */
+        . = ALIGN(4);
+        KEEP(*(.init))
+        . = ALIGN(4);
+        __preinit_array_start = .;
+        KEEP (*(.preinit_array))
+        __preinit_array_end = .;
+
+        . = ALIGN(4);
+        __init_array_start = .;
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array))
+        __init_array_end = .;
+
+        . = ALIGN(0x4);
+        KEEP (*crtbegin.o(.ctors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+        KEEP (*(SORT(.ctors.*)))
+        KEEP (*crtend.o(.ctors))
+
+        . = ALIGN(4);
+        KEEP(*(.fini))
+
+        . = ALIGN(4);
+        __fini_array_start = .;
+        KEEP (*(.fini_array))
+        KEEP (*(SORT(.fini_array.*)))
+        __fini_array_end = .;
+
+        KEEP (*crtbegin.o(.dtors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+        KEEP (*(SORT(.dtors.*)))
+        KEEP (*crtend.o(.dtors))
+
+        . = ALIGN(4);
+        _efixed = .;            /* End of text section */
+    } > rom
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    PROVIDE_HIDDEN (__exidx_start = .);
+    .ARM.exidx :
+    {
+      *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > rom
+    PROVIDE_HIDDEN (__exidx_end = .);
+
+    . = ALIGN(4); 
+    _etext = .;
+
+    .relocate : AT (_etext)
+    {
+        . = ALIGN(4);
+        _srelocate = .;
+        /* we must make sure the .dfudata is linked to start of RAM */
+        *(.dfudata .dfudata.*);
+        *(.ramfunc .ramfunc.*);
+        *(.data .data.*);
+        . = ALIGN(4);
+        _erelocate = .;
+    } > ram
+
+    /* .bss section which is used for uninitialized data */ 
+    .bss (NOLOAD) :
+    { 
+        . = ALIGN(4);
+        _sbss = . ;
+        _szero = .;
+        *(.bss .bss.*)
+        *(COMMON)
+        . = ALIGN(4);
+        _ebss = . ;
+        _ezero = .;
+    } > ram
+
+    /* stack section */
+    .stack (NOLOAD):
+    {
+        . = ALIGN(8);
+        *(.stack .stack.*)
+    } > ram
+
+    . = ALIGN(4); 
+    _end = . ; 
+}

firmware/libboard/common/resources/sam3s2/sram.ld

@@ -0,0 +1,140 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------
+ *      Linker script for running in internal SRAM on the ATSAM3S2
+ *----------------------------------------------------------------------------*/
+
+OUTPUT_FORMAT ("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+SEARCH_DIR(.)
+
+/* Memory Spaces Definitions */
+MEMORY
+{
+	rom (rx)  : ORIGIN = 0x00400000, LENGTH = 0x00020000 /* flash, 128K */
+	ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 /* sram, 32K */
+}
+
+/* Section Definitions */ 
+SECTIONS 
+{ 
+    .text : 
+    { 
+        . = ALIGN(4);
+        _sfixed = .;
+        KEEP(*(.vectors .vectors.*))
+        *(.text .text.* .gnu.linkonce.t.*) 	      
+        *(.glue_7t) *(.glue_7)		                
+        *(.rodata .rodata* .gnu.linkonce.r.*)		    	                  
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+
+        /* Support C constructors, and C destructors in both user code
+           and the C library. This also provides support for C++ code. */
+        . = ALIGN(4);
+        KEEP(*(.init))
+        . = ALIGN(4);
+        __preinit_array_start = .;
+        KEEP (*(.preinit_array))
+        __preinit_array_end = .;
+
+        . = ALIGN(4);
+        __init_array_start = .;
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array))
+        __init_array_end = .;
+
+        . = ALIGN(0x4);
+        KEEP (*crtbegin.o(.ctors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+        KEEP (*(SORT(.ctors.*)))
+        KEEP (*crtend.o(.ctors))
+
+        . = ALIGN(4);
+        KEEP(*(.fini))
+
+        . = ALIGN(4);
+        __fini_array_start = .;
+        KEEP (*(.fini_array))
+        KEEP (*(SORT(.fini_array.*)))
+        __fini_array_end = .;
+
+        KEEP (*crtbegin.o(.dtors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+        KEEP (*(SORT(.dtors.*)))
+        KEEP (*crtend.o(.dtors))
+
+        . = ALIGN(4);
+        _efixed = .;            /* End of text section */
+    } > ram
+
+    . = ALIGN(4); 
+    _etext = .;
+
+    .relocate : AT (_etext)
+    {
+        . = ALIGN(4);
+        _srelocate = .;
+        *(.ramfunc .ramfunc.*);
+        *(.data .data.*);
+        . = ALIGN(4);
+        _erelocate = .;
+    } > ram
+
+    /* .bss section which is used for uninitialized data */ 
+    .bss (NOLOAD) :
+    { 
+        . = ALIGN(4);
+        _sbss = . ;
+        _szero = .;
+        *(.bss .bss.*)
+        *(COMMON)
+        . = ALIGN(4);
+        _ebss = . ;
+        _ezero = .;
+    } > ram
+
+    /* stack section */
+    .stack (NOLOAD):
+    {
+        . = ALIGN(8);
+        *(.stack .stack.*)
+    } > ram
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    PROVIDE_HIDDEN (__exidx_start = .);
+    .ARM.exidx :
+    {
+      *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > ram
+    PROVIDE_HIDDEN (__exidx_end = .);
+
+    . = ALIGN(4); 
+    _end = . ; 
+}

firmware/libboard/common/resources/sam3s2/sram_samba.lds

@@ -0,0 +1,91 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------
+ *      Linker script for running in internal SRAM on the AT91SAM3S2
+ *----------------------------------------------------------------------------*/
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(entry)
+
+/* Memory Spaces Definitions */
+MEMORY
+{
+    romcodesram (W!RX) : ORIGIN = 0x20000000, LENGTH = 0x0800
+    sram (W!RX) : ORIGIN = 0x20000800, LENGTH = 0x00007800 /* sram, 32K - sizeof(romcodesram) */
+}
+
+/* Entry point */
+/*ENTRY (ResetException)*/
+
+SECTIONS
+{
+    /* startup code in the .isr_vector */
+    .text :
+    {
+        . = ALIGN(4);
+        _stext = .;
+        KEEP(*(.isr_vector .isr_vector.*))
+        *(.mailbox)
+        *(.text .text.*)
+        *(.rodata .rodata.*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gcc_except_table)
+        *(.rodata .rodata*)
+        *(.gnu.linkonce.r.*)
+        . = ALIGN(4);
+        _etext = .;
+    } > sram
+
+    /* data */
+    .data :
+    {
+        . = ALIGN(4);
+        _sidata = .;
+        _sdata = .;
+
+        *(.data)
+        *(.data.*)
+        . = ALIGN(4);
+        _edata = .;
+    } > sram
+
+    .bss (NOLOAD) : {
+        _szero = .;
+        *(.bss)
+        . = ALIGN(4);
+        _ezero = .;
+    } >sram
+
+    /* Stack in SRAM */
+    _sstack = 0x20007FFC;
+}
+end = .;

firmware/libboard/common/resources/sam3s4/dfu.ld

@@ -0,0 +1,142 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------
+ *      Linker script for running in internal FLASH on the ATSAM3S4
+ *----------------------------------------------------------------------------*/
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+SEARCH_DIR(.)
+
+/* Memory Spaces Definitions */
+MEMORY
+{
+	/* reserve the first 16k (= 0x4000) for the DFU bootloader */
+	rom (rx)  : ORIGIN = 0x00404000, LENGTH = 0x0003c000 /* flash, 256K */
+	/* reserve the first 32 (= 0x20) bytes for the _g_dfu struct */
+	ram (rwx) : ORIGIN = 0x20000020, LENGTH = 0x0000bfe0 /* sram, 48K */
+}
+
+/* Section Definitions */ 
+SECTIONS 
+{ 
+    .text : 
+    { 
+        . = ALIGN(4);
+        _sfixed = .;
+        KEEP(*(.vectors .vectors.*))
+        *(.text .text.* .gnu.linkonce.t.*) 	      
+        *(.glue_7t) *(.glue_7)		                
+        *(.rodata .rodata* .gnu.linkonce.r.*)		    	                  
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+
+        /* Support C constructors, and C destructors in both user code
+           and the C library. This also provides support for C++ code. */
+        . = ALIGN(4);
+        KEEP(*(.init))
+        . = ALIGN(4);
+        __preinit_array_start = .;
+        KEEP (*(.preinit_array))
+        __preinit_array_end = .;
+
+        . = ALIGN(4);
+        __init_array_start = .;
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array))
+        __init_array_end = .;
+
+        . = ALIGN(0x4);
+        KEEP (*crtbegin.o(.ctors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+        KEEP (*(SORT(.ctors.*)))
+        KEEP (*crtend.o(.ctors))
+
+        . = ALIGN(4);
+        KEEP(*(.fini))
+
+        . = ALIGN(4);
+        __fini_array_start = .;
+        KEEP (*(.fini_array))
+        KEEP (*(SORT(.fini_array.*)))
+        __fini_array_end = .;
+
+        KEEP (*crtbegin.o(.dtors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+        KEEP (*(SORT(.dtors.*)))
+        KEEP (*crtend.o(.dtors))
+
+        . = ALIGN(4);
+        _efixed = .;            /* End of text section */
+    } > rom
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    PROVIDE_HIDDEN (__exidx_start = .);
+    .ARM.exidx :
+    {
+      *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > rom
+    PROVIDE_HIDDEN (__exidx_end = .);
+
+    . = ALIGN(4); 
+    _etext = .;
+
+    .relocate : AT (_etext)
+    {
+        . = ALIGN(4);
+        _srelocate = .;
+        *(.ramfunc .ramfunc.*);
+        *(.data .data.*);
+        . = ALIGN(4);
+        _erelocate = .;
+    } > ram
+
+    /* .bss section which is used for uninitialized data */ 
+    .bss (NOLOAD) :
+    { 
+        . = ALIGN(4);
+        _sbss = . ;
+        _szero = .;
+        *(.bss .bss.*)
+        *(COMMON)
+        . = ALIGN(4);
+        _ebss = . ;
+        _ezero = .;
+    } > ram
+
+    /* stack section */
+    .stack (NOLOAD):
+    {
+        . = ALIGN(8);
+        *(.stack .stack.*)
+    } > ram
+
+    . = ALIGN(4); 
+    _end = . ; 
+}

firmware/libboard/common/resources/sam3s4/flash.ld

@@ -1,143 +1,142 @@
-/* ----------------------------------------------------------------------------
- *         ATMEL Microcontroller Software Support
- * ----------------------------------------------------------------------------
- * Copyright (c) 2009, Atmel Corporation
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * - Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the disclaimer below.
- *
- * Atmel's name may not be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
- * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- * ----------------------------------------------------------------------------
- */
-
-/*------------------------------------------------------------------------------
- *      Linker script for running in internal FLASH on the ATSAM3S4
- *----------------------------------------------------------------------------*/
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-SEARCH_DIR(.)
-ENTRY(main)
-
-/* Memory Spaces Definitions */
-MEMORY
-{
-        rom (rx)  : ORIGIN = 0x00400000, LENGTH = 0x00020000 /* flash, 256K */
-	ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 /* sram, 48K */
-       /* rom (rx)  : ORIGIN = 0x00400000, LENGTH = 0x00040000 /* flash, 256K */
-	/*ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x0000c000 /* sram, 48K */
-}
-
-/* Section Definitions */ 
-SECTIONS 
-{ 
-    .text : 
-    { 
-        . = ALIGN(4);
-        _sfixed = .;
-        KEEP(*(.vectors .vectors.*))
-        *(.text .text.* .gnu.linkonce.t.*) 	      
-        *(.glue_7t) *(.glue_7)		                
-        *(.rodata .rodata* .gnu.linkonce.r.*)		    	                  
-        *(.ARM.extab* .gnu.linkonce.armextab.*)
-
-        /* Support C constructors, and C destructors in both user code
-           and the C library. This also provides support for C++ code. */
-        . = ALIGN(4);
-        KEEP(*(.init))
-        . = ALIGN(4);
-        __preinit_array_start = .;
-        KEEP (*(.preinit_array))
-        __preinit_array_end = .;
-
-        . = ALIGN(4);
-        __init_array_start = .;
-        KEEP (*(SORT(.init_array.*)))
-        KEEP (*(.init_array))
-        __init_array_end = .;
-
-        . = ALIGN(0x4);
-        KEEP (*crtbegin.o(.ctors))
-        KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-        KEEP (*(SORT(.ctors.*)))
-        KEEP (*crtend.o(.ctors))
-
-        . = ALIGN(4);
-        KEEP(*(.fini))
-
-        . = ALIGN(4);
-        __fini_array_start = .;
-        KEEP (*(.fini_array))
-        KEEP (*(SORT(.fini_array.*)))
-        __fini_array_end = .;
-
-        KEEP (*crtbegin.o(.dtors))
-        KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-        KEEP (*(SORT(.dtors.*)))
-        KEEP (*crtend.o(.dtors))
-
-        . = ALIGN(4);
-        _efixed = .;            /* End of text section */
-    } > rom
-
-    /* .ARM.exidx is sorted, so has to go in its own output section.  */
-    PROVIDE_HIDDEN (__exidx_start = .);
-    .ARM.exidx :
-    {
-      *(.ARM.exidx* .gnu.linkonce.armexidx.*)
-    } > rom
-    PROVIDE_HIDDEN (__exidx_end = .);
-
-    . = ALIGN(4); 
-    _etext = .;
-
-    .relocate : AT (_etext)
-    {
-        . = ALIGN(4);
-        _srelocate = .;
-        *(.ramfunc .ramfunc.*);
-        *(.data .data.*);
-        . = ALIGN(4);
-        _erelocate = .;
-    } > ram
-
-    /* .bss section which is used for uninitialized data */ 
-    .bss (NOLOAD) :
-    { 
-        . = ALIGN(4);
-        _sbss = . ;
-        _szero = .;
-        *(.bss .bss.*)
-        *(COMMON)
-        . = ALIGN(4);
-        _ebss = . ;
-        _ezero = .;
-    } > ram
-
-    /* stack section */
-    .stack (NOLOAD):
-    {
-        . = ALIGN(8);
-        *(.stack .stack.*)
-    } > ram
-
-    . = ALIGN(4); 
-    _end = . ; 
-}
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------
+ *      Linker script for running in internal FLASH on the ATSAM3S4
+ *----------------------------------------------------------------------------*/
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+SEARCH_DIR(.)
+
+/* Memory Spaces Definitions */
+MEMORY
+{
+	rom (rx)  : ORIGIN = 0x00400000, LENGTH = 0x00040000 /* flash, 256K */
+	ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x0000c000 /* sram, 48K */
+}
+
+/* Section Definitions */ 
+SECTIONS 
+{ 
+    .text : 
+    { 
+        . = ALIGN(4);
+        _sfixed = .;
+        KEEP(*(.vectors .vectors.*))
+        *(.text .text.* .gnu.linkonce.t.*) 	      
+        *(.glue_7t) *(.glue_7)		                
+        *(.rodata .rodata* .gnu.linkonce.r.*)		    	                  
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+
+        /* Support C constructors, and C destructors in both user code
+           and the C library. This also provides support for C++ code. */
+        . = ALIGN(4);
+        KEEP(*(.init))
+        . = ALIGN(4);
+        __preinit_array_start = .;
+        KEEP (*(.preinit_array))
+        __preinit_array_end = .;
+
+        . = ALIGN(4);
+        __init_array_start = .;
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array))
+        __init_array_end = .;
+
+        . = ALIGN(0x4);
+        KEEP (*crtbegin.o(.ctors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+        KEEP (*(SORT(.ctors.*)))
+        KEEP (*crtend.o(.ctors))
+
+        . = ALIGN(4);
+        KEEP(*(.fini))
+
+        . = ALIGN(4);
+        __fini_array_start = .;
+        KEEP (*(.fini_array))
+        KEEP (*(SORT(.fini_array.*)))
+        __fini_array_end = .;
+
+        KEEP (*crtbegin.o(.dtors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+        KEEP (*(SORT(.dtors.*)))
+        KEEP (*crtend.o(.dtors))
+
+        . = ALIGN(4);
+        _efixed = .;            /* End of text section */
+    } > rom
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    PROVIDE_HIDDEN (__exidx_start = .);
+    .ARM.exidx :
+    {
+      *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > rom
+    PROVIDE_HIDDEN (__exidx_end = .);
+
+    . = ALIGN(4); 
+    _etext = .;
+
+    .relocate : AT (_etext)
+    {
+        . = ALIGN(4);
+        _srelocate = .;
+        /* we must make sure the .dfudata is linked to start of RAM */
+        *(.dfudata .dfudata.*);
+        *(.ramfunc .ramfunc.*);
+        *(.data .data.*);
+        . = ALIGN(4);
+        _erelocate = .;
+    } > ram
+
+    /* .bss section which is used for uninitialized data */ 
+    .bss (NOLOAD) :
+    { 
+        . = ALIGN(4);
+        _sbss = . ;
+        _szero = .;
+        *(.bss .bss.*)
+        *(COMMON)
+        . = ALIGN(4);
+        _ebss = . ;
+        _ezero = .;
+    } > ram
+
+    /* stack section */
+    .stack (NOLOAD):
+    {
+        . = ALIGN(8);
+        *(.stack .stack.*)
+    } > ram
+
+    . = ALIGN(4); 
+    _end = . ; 
+}

firmware/libboard/common/resources/sam3s4/sram.ld

@@ -0,0 +1,140 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------
+ *      Linker script for running in internal SRAM on the ATSAM3S4
+ *----------------------------------------------------------------------------*/
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+SEARCH_DIR(.)
+
+/* Memory Spaces Definitions */
+MEMORY
+{
+	rom (rx)  : ORIGIN = 0x00400000, LENGTH = 0x00040000 /* flash, 256K */
+	ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x0000c000 /* sram, 48K */
+}
+
+/* Section Definitions */ 
+SECTIONS 
+{ 
+    .text : 
+    { 
+        . = ALIGN(4);
+        _sfixed = .;
+        KEEP(*(.vectors .vectors.*))
+        *(.text .text.* .gnu.linkonce.t.*) 	      
+        *(.glue_7t) *(.glue_7)		                
+        *(.rodata .rodata* .gnu.linkonce.r.*)		    	                  
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+
+        /* Support C constructors, and C destructors in both user code
+           and the C library. This also provides support for C++ code. */
+        . = ALIGN(4);
+        KEEP(*(.init))
+        . = ALIGN(4);
+        __preinit_array_start = .;
+        KEEP (*(.preinit_array))
+        __preinit_array_end = .;
+
+        . = ALIGN(4);
+        __init_array_start = .;
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array))
+        __init_array_end = .;
+
+        . = ALIGN(0x4);
+        KEEP (*crtbegin.o(.ctors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+        KEEP (*(SORT(.ctors.*)))
+        KEEP (*crtend.o(.ctors))
+
+        . = ALIGN(4);
+        KEEP(*(.fini))
+
+        . = ALIGN(4);
+        __fini_array_start = .;
+        KEEP (*(.fini_array))
+        KEEP (*(SORT(.fini_array.*)))
+        __fini_array_end = .;
+
+        KEEP (*crtbegin.o(.dtors))
+        KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+        KEEP (*(SORT(.dtors.*)))
+        KEEP (*crtend.o(.dtors))
+
+        . = ALIGN(4);
+        _efixed = .;            /* End of text section */
+    } > ram
+
+    . = ALIGN(4); 
+    _etext = .;
+
+    .relocate : AT (_etext)
+    {
+        . = ALIGN(4);
+        _srelocate = .;
+        *(.ramfunc .ramfunc.*);
+        *(.data .data.*);
+        . = ALIGN(4);
+        _erelocate = .;
+    } > ram
+
+    /* .bss section which is used for uninitialized data */ 
+    .bss (NOLOAD) :
+    { 
+        . = ALIGN(4);
+        _sbss = . ;
+        _szero = .;
+        *(.bss .bss.*)
+        *(COMMON)
+        . = ALIGN(4);
+        _ebss = . ;
+        _ezero = .;
+    } > ram
+
+    /* stack section */
+    .stack (NOLOAD):
+    {
+        . = ALIGN(8);
+        *(.stack .stack.*)
+    } > ram
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    PROVIDE_HIDDEN (__exidx_start = .);
+    .ARM.exidx :
+    {
+      *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > ram
+    PROVIDE_HIDDEN (__exidx_end = .);
+
+    . = ALIGN(4); 
+    _end = . ; 
+}

firmware/libboard/common/resources/sam3s4/sram_samba.lds

@@ -0,0 +1,91 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------
+ *      Linker script for running in internal SRAM on the AT91SAM3S4
+ *----------------------------------------------------------------------------*/
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(entry)
+
+/* Memory Spaces Definitions */
+MEMORY
+{
+    romcodesram (W!RX) : ORIGIN = 0x20000000, LENGTH = 0x01000
+    sram (W!RX) : ORIGIN = 0x20001000, LENGTH = 0x0000B000 /* sram, 48K - sizeof(romcodesram) */
+}
+
+/* Entry point */
+/*ENTRY (ResetException)*/
+
+SECTIONS
+{
+    /* startup code in the .isr_vector */
+    .text :
+    {
+        . = ALIGN(4);
+        _stext = .;
+        KEEP(*(.isr_vector .isr_vector.*))
+        *(.mailbox)
+        *(.text .text.*)
+        *(.rodata .rodata.*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gcc_except_table)
+        *(.rodata .rodata*)
+        *(.gnu.linkonce.r.*)
+        . = ALIGN(4);
+        _etext = .;
+    } > sram
+
+    /* data */
+    .data :
+    {
+        . = ALIGN(4);
+        _sidata = .;
+        _sdata = .;
+
+        *(.data)
+        *(.data.*)
+        . = ALIGN(4);
+        _edata = .;
+    } > sram
+
+    .bss (NOLOAD) : {
+        _szero = .;
+        *(.bss)
+        . = ALIGN(4);
+        _ezero = .;
+    } >sram
+
+    /* Stack in SRAM */
+    _sstack = 0x2000BFFC;
+}
+end = .;

firmware/libboard/common/resources/sam3s_ek_flash.gdb

@@ -0,0 +1,31 @@
+#*******************************************************
+#
+#  Connect to J-Link and debug application in flash.
+#
+
+# define 'reset' command
+define reset
+
+# Connect to the J-Link gdb server
+target remote localhost:2331
+# Reset the chip to get to a known state
+monitor reset
+
+# Select flash device
+monitor flash device = AT91SAM3S4C
+# Enable flash download and flash breakpoints
+monitor flash download = 1
+# Load the program
+load
+
+# Reset peripheral  (RSTC_CR)
+set *0x400e1400 = 0xA5000004
+
+# Initializing PC and stack pointer
+mon reg sp=(0x400000)
+set *0x400004 = *0x400004 & 0xFFFFFFFE
+mon reg pc=(0x400004)
+info reg
+
+# end of 'reset' command
+end

firmware/libboard/common/resources/sam3s_ek_sram.gdb

@@ -0,0 +1,27 @@
+#*************************************************
+#
+#  Connect to J-Link and debug application in sram on SAM3S
+#
+# Note:
+#     First, users should modify Step1 and Step2 according to their project,
+#     then do Step3.
+
+# Step1: Connect to the J-Link gdb server
+define reset
+target remote localhost:2331
+monitor reset
+
+# Step2: Load file(eg. getting-started project)
+load
+
+# Step3: Reset peripheral  (RSTC_CR)
+set *0x400e1400 = 0xA5000004
+
+# Step4: Initializing PC and stack pointer
+# Modify pc value to even before writing pc register
+mon reg sp=(0x20000000)
+set *0x20000004 = *0x20000004 & 0xFFFFFFFE
+mon reg pc=(0x20000004)
+info reg
+
+end

firmware/libboard/common/resources/sam3s_vb_sram.gdb

@@ -0,0 +1,27 @@
+#*************************************************
+#
+#  Connect to J-Link and debug application in sram on SAM3S
+#
+# Note:
+#     First, users should modify Step1 and Step2 according to their project,
+#     then do Step3.
+
+# Step1: Connect to the J-Link gdb server
+define reset
+target remote localhost:2331
+monitor reset
+
+# Step2: Load file(eg. getting-started project)
+load
+
+# Step3: Reset peripheral  (RSTC_CR)
+set *0x400e1400 = 0xA5000004
+
+# Step4: Initializing PC and stack pointer
+# Modify pc value to even before writing pc register
+mon reg sp=(0x20000000)
+set *0x20000004 = *0x20000004 & 0xFFFFFFFE
+mon reg pc=(0x20000004)
+info reg
+
+end

firmware/libboard/common/source/board_cstartup_gnu.c

@@ -61,7 +61,6 @@ extern uint32_t _ezero;
 extern int main( void ) ;
 /** \endcond */
 void ResetException( void ) ;
-extern void __libc_init_array( void ) ;
 
 /*------------------------------------------------------------------------------
  *         Exception Table
@@ -125,6 +124,23 @@ IntFunc exception_table[] = {
     IrqHandlerNotUsed   /* 35 not used */
 };
 
+#if defined(BOARD_USB_DFU) && defined(APPLICATION_dfu)
+#include "usb/device/dfu/dfu.h"
+static void BootIntoApp(void)
+{
+	unsigned int *pSrc;
+	void (*appReset)(void);
+
+	pSrc = (unsigned int *) ((unsigned char *)IFLASH_ADDR + BOARD_DFU_BOOT_SIZE);
+	SCB->VTOR = ((unsigned int)(pSrc)) | (0x0 << 7);
+	appReset = pSrc[1];
+
+	g_dfu->state = DFU_STATE_appIDLE;
+
+	appReset();
+}
+#endif
+
 /**
  * \brief This is the code that gets called on processor reset.
  * To initialize the device, and call the main() routine.
@@ -136,6 +152,18 @@ void ResetException( void )
     /* Low level Initialize */
     LowLevelInit() ;
 
+
+#if defined(BOARD_USB_DFU) && defined(APPLICATION_dfu)
+    /* we are before the text segment has been relocated, so g_dfu is
+     * not initialized yet */
+    g_dfu = &_g_dfu;
+    if (g_dfu->magic != USB_DFU_MAGIC) {
+        BootIntoApp();
+        /* Infinite loop */
+        while ( 1 ) ;
+    }
+#endif
+
     /* Initialize the relocate segment */
     pSrc = &_etext ;
     pDest = &_srelocate ;
@@ -163,8 +191,8 @@ void ResetException( void )
 	    SCB->VTOR |= 1 << SCB_VTOR_TBLBASE_Pos ;
     }
 
-    /* Initialize the C library */
-    __libc_init_array() ;
+    /* App should have disabled interrupts during the transition */
+    __enable_irq();
 
     /* Branch to main function */
     main() ;

firmware/libboard/common/source/board_lowlevel.c

@@ -43,31 +43,69 @@
  *        Local definitions
  *----------------------------------------------------------------------------*/
 
-/* Clock settings at 48MHz  for 18 MHz crystal */
+#define BOARD_OSCOUNT   (CKGR_MOR_MOSCXTST(0x8))
+#define BOARD_MCKR      (PMC_MCKR_PRES_CLK | PMC_MCKR_CSS_PLLA_CLK)
+
 #if (BOARD_MCK == 48000000)
-#define BOARD_OSCOUNT   (CKGR_MOR_MOSCXTST(0x8))
+#if (BOARD_MAINOSC == 18432000)
+/* Clock settings at 48MHz  for 18 MHz crystal */
 #define BOARD_PLLAR     (CKGR_PLLAR_STUCKTO1 \
-                       | CKGR_PLLAR_MULA(0xc) \
+                       | CKGR_PLLAR_MULA(13-1) \
                        | CKGR_PLLAR_PLLACOUNT(0x1) \
-                       | CKGR_PLLAR_DIVA(0x5))
-#define BOARD_MCKR      (PMC_MCKR_PRES_CLK | PMC_MCKR_CSS_PLLA_CLK)
-
-/* Clock settings at 64MHz  for 18 MHz crystal */
-#elif (BOARD_MCK == 64000000)
-#define BOARD_OSCOUNT   (CKGR_MOR_MOSCXTST(0x8))
+                       | CKGR_PLLAR_DIVA(5))
+#elif (BOARD_MAINOSC == 12000000)
+/* QMod has 12 MHz clock, so multply by 8 (96 MHz) and divide by 2 */
 #define BOARD_PLLAR     (CKGR_PLLAR_STUCKTO1 \
-                       | CKGR_PLLAR_MULA(0x06) \
+                       | CKGR_PLLAR_MULA(8-1) \
                        | CKGR_PLLAR_PLLACOUNT(0x1) \
-                       | CKGR_PLLAR_DIVA(0x2))
-#define BOARD_MCKR      (PMC_MCKR_PRES_CLK | PMC_MCKR_CSS_PLLA_CLK)
-
+                       | CKGR_PLLAR_DIVA(2))
 #else
-    #error "No settings for current BOARD_MCK."
+#error "Please define PLLA config for your MAINOSC frequency"
+#endif /* MAINOSC */
+#elif (BOARD_MCK == 64000000)
+#if (BOARD_MAINOSC == 18432000)
+/* Clock settings at 64MHz  for 18 MHz crystal: 64.512 MHz */
+#define BOARD_PLLAR     (CKGR_PLLAR_STUCKTO1 \
+                       | CKGR_PLLAR_MULA(7-1) \
+                       | CKGR_PLLAR_PLLACOUNT(0x1) \
+                       | CKGR_PLLAR_DIVA(2))
+#elif (BOARD_MAINOSC == 12000000)
+/* QMod has 12 MHz clock, so multply by 10 / div by 2: 60 MHz */
+#define BOARD_PLLAR     (CKGR_PLLAR_STUCKTO1 \
+                       | CKGR_PLLAR_MULA(10-1) \
+                       | CKGR_PLLAR_PLLACOUNT(0x1) \
+                       | CKGR_PLLAR_DIVA(2))
+#error "Please define PLLA config for your MAINOSC frequency"
+#endif /* MAINOSC */
+#else
+    #error "No PLL settings for current BOARD_MCK."
+#endif
+
+#if (BOARD_MAINOSC == 12000000)
+#define PLLB_CFG (CKGR_PLLBR_DIVB(2)|CKGR_PLLBR_MULB(8-1)|CKGR_PLLBR_PLLBCOUNT_Msk)
+#elif (BOARD_MAINOSC == 18432000)
+#define PLLB_CFG (CKGR_PLLBR_DIVB(5)|CKGR_PLLBR_MULB(13-1)|CKGR_PLLBR_PLLBCOUNT_Msk)
+#else
+#error "Please configure PLLB for your MAINOSC freq"
 #endif
 
 /* Define clock timeout */
 #define CLOCK_TIMEOUT    0xFFFFFFFF
 
+/**
+ * \brief Configure 48MHz Clock for USB
+ */
+static void _ConfigureUsbClock(void)
+{
+	/* Enable PLLB for USB */
+	PMC->CKGR_PLLBR = PLLB_CFG;
+	while ((PMC->PMC_SR & PMC_SR_LOCKB) == 0) ;
+
+	/* USB Clock uses PLLB */
+	PMC->PMC_USB = PMC_USB_USBDIV(0)	/* /1 (no divider)  */
+			    | PMC_USB_USBS;	/* PLLB */
+}
+
 /*----------------------------------------------------------------------------
  *        Exported functions
  *----------------------------------------------------------------------------*/
@@ -81,6 +119,11 @@ extern WEAK void LowLevelInit( void )
 {
     uint32_t timeout = 0;
 
+    /* enable both LED and green LED */
+    PIOA->PIO_PER |= LED_RED | LED_GREEN;
+    PIOA->PIO_OER |= LED_RED | LED_GREEN;
+    PIOA->PIO_CODR |= LED_RED | LED_GREEN;
+
     /* Set 3 FWS for Embedded Flash Access */
     EFC->EEFC_FMR = EEFC_FMR_FWS(3);
 
@@ -93,30 +136,74 @@ extern WEAK void LowLevelInit( void )
     }
 */
 
+#ifndef qmod
     /* Initialize main oscillator */
-/*    if ( !(PMC->CKGR_MOR & CKGR_MOR_MOSCSEL) )
+    if ( !(PMC->CKGR_MOR & CKGR_MOR_MOSCSEL) )
     {
         PMC->CKGR_MOR = CKGR_MOR_KEY(0x37) | BOARD_OSCOUNT | CKGR_MOR_MOSCRCEN | CKGR_MOR_MOSCXTEN;
         timeout = 0;
         while (!(PMC->PMC_SR & PMC_SR_MOSCXTS) && (timeout++ < CLOCK_TIMEOUT));
-    }*/
+    }
 
     /* Switch to 3-20MHz Xtal oscillator */
+    PIOB->PIO_PDR = (1 << 8) | (1 << 9);
+    PIOB->PIO_PUDR = (1 << 8) | (1 << 9);
+    PIOB->PIO_PPDDR = (1 << 8) | (1 << 9);
     PMC->CKGR_MOR = CKGR_MOR_KEY(0x37) | BOARD_OSCOUNT | CKGR_MOR_MOSCRCEN | CKGR_MOR_MOSCXTEN | CKGR_MOR_MOSCSEL;
+    /* wait for Main XTAL oscillator stabilization */
     timeout = 0;
     while (!(PMC->PMC_SR & PMC_SR_MOSCSELS) && (timeout++ < CLOCK_TIMEOUT));
+#else
+    /* QMOD has external 12MHz clock source */
+    PIOB->PIO_PDR = (1 << 9);
+    PIOB->PIO_PUDR = (1 << 9);
+    PIOB->PIO_PPDDR = (1 << 9);
+    PMC->CKGR_MOR = CKGR_MOR_KEY(0x37) | CKGR_MOR_MOSCRCEN | CKGR_MOR_MOSCXTBY| CKGR_MOR_MOSCSEL;
+#endif
+
+    /* disable the red LED after main clock initialization */
+    PIOA->PIO_SODR = LED_RED;
+
+    /* "switch" to main clock as master clock source (should already be the case */
     PMC->PMC_MCKR = (PMC->PMC_MCKR & ~(uint32_t)PMC_MCKR_CSS_Msk) | PMC_MCKR_CSS_MAIN_CLK;
+    /* wait for master clock to be ready */
     for ( timeout = 0; !(PMC->PMC_SR & PMC_SR_MCKRDY) && (timeout++ < CLOCK_TIMEOUT) ; );
 
     /* Initialize PLLA */
     PMC->CKGR_PLLAR = BOARD_PLLAR;
+    /* Wait for PLLA to lock */
     timeout = 0;
     while (!(PMC->PMC_SR & PMC_SR_LOCKA) && (timeout++ < CLOCK_TIMEOUT));
 
-    /* Switch to main clock */
+    /* Switch to main clock (again ?!?) */
     PMC->PMC_MCKR = (BOARD_MCKR & ~PMC_MCKR_CSS_Msk) | PMC_MCKR_CSS_MAIN_CLK;
+    /* wait for master clock to be ready */
     for ( timeout = 0; !(PMC->PMC_SR & PMC_SR_MCKRDY) && (timeout++ < CLOCK_TIMEOUT) ; );
 
+    /* switch to PLLA as master clock source */
     PMC->PMC_MCKR = BOARD_MCKR ;
+    /* wait for master clock to be ready */
     for ( timeout = 0; !(PMC->PMC_SR & PMC_SR_MCKRDY) && (timeout++ < CLOCK_TIMEOUT) ; );
+
+    /* Configure SysTick for 1ms */
+    SysTick_Config(BOARD_MCK/1000);
+
+    _ConfigureUsbClock();
+}
+
+/* SysTick based delay function */
+
+volatile uint32_t jiffies;
+
+/* Interrupt handler for SysTick interrupt */
+void SysTick_Handler(void)
+{
+	jiffies++;
+}
+
+void mdelay(unsigned int msecs)
+{
+	uint32_t jiffies_start = jiffies;
+	do {
+	} while ((jiffies - jiffies_start) < msecs);
 }

firmware/libboard/common/source/boardver_adc.c

@@ -0,0 +1,83 @@
+#include "board.h"
+#include "boardver_adc.h"
+
+/* FIXME: share this with mode_cardemu.c */
+#define UV_PER_LSB	((3300 * 1000) / 4096)
+static uint32_t adc2uv(uint16_t adc)
+{
+	uint32_t uv = (uint32_t) adc * UV_PER_LSB;
+	return uv;
+}
+
+/***********************************************************************
+ * ADC for board version detection
+ ***********************************************************************/
+
+#ifdef PIN_VERSION_DET
+
+static int adc_sam3s_reva_errata = 0;
+
+static const Pin pin_version_det = PIN_VERSION_DET;
+
+/* Warning: Don't call this while other code (like the SIM VCC voltage
+ * reading) is running.  The idea is you call this once during board
+ * startup and cache the result in a (global) variable if you need it
+ * later throughout the code */
+int get_board_version_adc(void)
+{
+	uint32_t chip_arch = CHIPID->CHIPID_CIDR & CHIPID_CIDR_ARCH_Msk;
+	uint32_t chip_ver = CHIPID->CHIPID_CIDR & CHIPID_CIDR_VERSION_Msk;
+	uint16_t sample;
+	uint32_t uv;
+
+	PIO_Configure(&pin_version_det, 1);
+
+	PMC_EnablePeripheral(ID_ADC);
+
+	ADC->ADC_CR |= ADC_CR_SWRST;
+	if (chip_ver == 0 &&
+	    (chip_arch == CHIPID_CIDR_ARCH_SAM3SxA ||
+	     chip_arch == CHIPID_CIDR_ARCH_SAM3SxB ||
+	     chip_arch == CHIPID_CIDR_ARCH_SAM3SxC)) {
+		TRACE_INFO("Enabling Rev.A ADC Errata work-around\r\n");
+		adc_sam3s_reva_errata = 1;
+	}
+
+	if (adc_sam3s_reva_errata) {
+		/* Errata Work-Around to clear EOCx flags */
+		volatile uint32_t foo;
+		int i;
+		for (i = 0; i < 16; i++)
+			foo = ADC->ADC_CDR[i];
+	}
+
+	/* Initialize ADC for AD2, fADC=48/24=2MHz */
+	ADC->ADC_MR = ADC_MR_TRGEN_DIS | ADC_MR_LOWRES_BITS_12 |
+		      ADC_MR_SLEEP_NORMAL | ADC_MR_FWUP_OFF |
+		      ADC_MR_FREERUN_OFF | ADC_MR_PRESCAL(23) |
+		      ADC_MR_STARTUP_SUT8 | ADC_MR_SETTLING(3) |
+		      ADC_MR_ANACH_NONE | ADC_MR_TRACKTIM(4) |
+		      ADC_MR_TRANSFER(1) | ADC_MR_USEQ_NUM_ORDER;
+	/* enable AD2 channel only */
+	ADC->ADC_CHER = ADC_CHER_CH2;
+
+	/* Make sure we don't use interrupts as that's what the SIM card
+	 * VCC ADC code is using */
+	ADC->ADC_IER = 0;
+	NVIC_DisableIRQ(ADC_IRQn);
+
+	ADC->ADC_CR |= ADC_CR_START;
+
+	/* busy-wait, actually read the value */
+	do { } while (!(ADC->ADC_ISR & ADC_ISR_EOC2));
+	/* convert to voltage */
+	sample = ADC->ADC_CDR[2];
+	uv = adc2uv(sample);
+	TRACE_INFO("VERSION_DET ADC=%u => %u uV\r\n", sample, uv);
+
+	/* FIXME: convert to board version based on thresholds */
+
+	return 0;
+}
+
+#endif /* PIN_VERSION_DET */

firmware/libboard/common/source/manifest.c

@@ -0,0 +1,7 @@
+
+#include "manifest.h"
+
+const char *manifest_application = APPLICATION;
+const char *manifest_revision = GIT_VERSION;
+const char *manifest_board = BOARD;
+const char *manifest_environment = ENVIRONMENT;

firmware/libboard/common/source/uart_console.c

@@ -47,15 +47,6 @@
  *        Definitions
  *----------------------------------------------------------------------------*/
 
-/** Console baudrate always using 115200. */
-#define CONSOLE_BAUDRATE    115200
-/** Usart Hw interface used by the console (UART0). */
-#define CONSOLE_USART       UART0
-/** Usart Hw ID used by the console (UART0). */
-#define CONSOLE_ID          ID_UART0
-/** Pins description corresponding to Rxd,Txd, (UART pins) */
-#define CONSOLE_PINS        {PINS_UART}
-
 /*----------------------------------------------------------------------------
  *        Variables
  *----------------------------------------------------------------------------*/

firmware/libboard/owhw/include/board.h

@@ -0,0 +1,53 @@
+#pragma once
+#include "board_common.h"
+
+/** Name of the board */
+#define BOARD_NAME "OWHW"
+/** Board definition */
+#define owhw
+
+#define BOARD_MAINOSC 18432000
+
+/* USIM 2 interface (USART) */
+#define PIN_USIM2_CLK		{PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+#define PIN_USIM2_IO		{PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+#define PINS_ISO7816_USIM2	PIN_USIM2_CLK, PIN_USIM2_IO
+
+/* USIM 2 interface (TC) */
+#define PIN_USIM2_IO_TC		{PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+#define PIN_USIM2_CLK_TC	{PIO_PA4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+#define PINS_TC_USIM2		PIN_USIM2_IO_TC, PIN_USIM2_CLK_TC
+
+/* USIM 1 interface (USART) */
+#define PIN_USIM1_IO		{PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+#define PIN_USIM1_CLK		{PIO_PA23, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+#define PINS_ISO7816_USIM1	PIN_USIM1_CLK, PIN_USIM1_IO
+
+/* USIM 1 interface (TC) */
+#define PIN_USIM1_IO_TC		{PIO_PA27, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+#define PIN_USIM1_CLK_TC	{PIO_PA29, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+#define PINS_TC_USIM1		PIN_USIM1_IO_TC, PIN_USIM1_CLK_TC
+
+#define PIN_SET_USIM1_PRES	{PIO_PA12, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+#define PIN_USIM1_nRST		{PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
+#define PIN_USIM1_VCC		{PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
+
+#define PIN_SET_USIM2_PRES	{PIO_PA14, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+#define PIN_USIM2_nRST		{PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
+#define PIN_USIM2_VCC		{PIO_PB2, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
+
+#define PINS_USIM1		PINS_TC_USIM1, PINS_ISO7816_USIM1, PIN_USIM1_nRST, PIN_SET_USIM1_PRES
+#define PINS_USIM2		PINS_TC_USIM2, PINS_ISO7816_USIM2, PIN_USIM2_nRST, PIN_SET_USIM2_PRES
+
+#define PINS_CARDSIM		{ PIN_SET_USIM1_PRES, PIN_SET_USIM2_PRES }
+
+#define SIMTRACE_VENDOR_ID          0x1d50
+#define SIMTRACE_PRODUCT_ID         0x60e3	/* FIXME */
+#define USB_VENDOR_ID               SIMTRACE_VENDOR_ID
+#define USB_PRODUCT_ID              SIMTRACE_PRODUCT_ID
+
+#define CARDEMU_SECOND_UART
+/* Disable VCC/ADC detection, as OWHWv2 has no ADCVREF */
+//#define DETECT_VCC_BY_ADC
+
+#define HAVE_CARDEM

firmware/libboard/owhw/source/owhw.c

@@ -0,0 +1,40 @@
+/* Card simulator specific functions */
+/* (C) 2015 by Harald Welte <hwelte@hmw-consulting.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include "chip.h"
+#include "board.h"
+#include "utils.h"
+
+static const Pin pins_cardsim[] = PINS_CARDSIM;
+
+void cardsim_set_simpres(uint8_t slot, int present)
+{
+	if (slot > 1)
+		return;
+
+	if (present)
+		PIO_Set(&pins_cardsim[slot]);
+	else
+		PIO_Clear(&pins_cardsim[slot]);
+}
+
+void cardsim_gpio_init(void)
+{
+	PIO_Configure(&pins_cardsim, ARRAY_SIZE(pins_cardsim));
+}

firmware/libboard/qmod/include/board.h

@@ -0,0 +1,66 @@
+#pragma once
+#include "board_common.h"
+
+/** Name of the board */
+#define BOARD_NAME "QMOD"
+/** Board definition */
+#define qmod
+
+#define BOARD_MAINOSC 12000000
+
+/* USIM 2 interface (USART) */
+#define PIN_USIM2_CLK		{PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+#define PIN_USIM2_IO		{PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+#define PINS_ISO7816_USIM2	PIN_USIM2_CLK, PIN_USIM2_IO
+
+/* USIM 2 interface (TC) */
+#define PIN_USIM2_IO_TC		{PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+#define PIN_USIM2_CLK_TC	{PIO_PA4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+#define PINS_TC_USIM2		PIN_USIM2_IO_TC, PIN_USIM2_CLK_TC
+
+/* USIM 1 interface (USART) */
+#define PIN_USIM1_IO		{PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+#define PIN_USIM1_CLK		{PIO_PA23, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+#define PINS_ISO7816_USIM1	PIN_USIM1_CLK, PIN_USIM1_IO
+
+/* USIM 1 interface (TC) */
+#define PIN_USIM1_IO_TC		{PIO_PA27, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+#define PIN_USIM1_CLK_TC	{PIO_PA29, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
+#define PINS_TC_USIM1		PIN_USIM1_IO_TC, PIN_USIM1_CLK_TC
+
+#define PIN_SET_USIM1_PRES	{PIO_PA12, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+#define PIN_USIM1_nRST		{PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
+#define PIN_USIM1_VCC		{PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
+
+#define PIN_SET_USIM2_PRES	{PIO_PA14, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+#define PIN_USIM2_nRST		{PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
+#define PIN_USIM2_VCC		{PIO_PB2, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT}
+
+#define PINS_USIM1		PINS_TC_USIM1, PINS_ISO7816_USIM1, PIN_USIM1_nRST, PIN_SET_USIM1_PRES
+#define PINS_USIM2		PINS_TC_USIM2, PINS_ISO7816_USIM2, PIN_USIM2_nRST, PIN_SET_USIM2_PRES
+
+#define PINS_CARDSIM		{ PIN_SET_USIM1_PRES, PIN_SET_USIM2_PRES }
+
+#define PIN_PRTPWR_OVERRIDE	{PIO_PA8, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
+
+/* inputs reading the WWAN LED level */
+#define PIN_WWAN1		{PIO_PA15, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE}
+#define PIN_WWAN2		{PIO_PA16, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE}
+#define PINS_WWAN_IN		{ PIN_WWAN1, PIN_WWAN2 }
+
+/* outputs controlling RESET input of modems */
+#define PIN_PERST1		{PIO_PA25, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_PULLUP}
+#define PIN_PERST2		{PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_PULLUP}
+#define PINS_PERST		{ PIN_PERST1, PIN_PERST2 }
+
+#define PIN_VERSION_DET		{PIO_PA19, PIOA, ID_PIOA, PIO_PERIPH_D, PIO_DEFAULT}
+
+#define SIMTRACE_VENDOR_ID          0x1d50
+#define SIMTRACE_PRODUCT_ID         0x60e3	/* FIXME */
+#define USB_VENDOR_ID               SIMTRACE_VENDOR_ID
+#define USB_PRODUCT_ID              SIMTRACE_PRODUCT_ID
+
+#define CARDEMU_SECOND_UART
+#define DETECT_VCC_BY_ADC
+
+#define HAVE_CARDEM

firmware/libboard/qmod/include/i2c.h

@@ -0,0 +1,5 @@
+#pragma once
+
+void i2c_pin_init(void);
+int eeprom_write_byte(uint8_t slave, uint8_t addr, uint8_t byte);
+int eeprom_read_byte(uint8_t slave, uint8_t addr);

firmware/libboard/qmod/include/wwan_led.h

@@ -0,0 +1,4 @@
+#pragma once
+
+int wwan_led_active(int wwan);
+int wwan_led_init(void);

firmware/libboard/qmod/include/wwan_perst.h

@@ -0,0 +1,4 @@
+#pragma once
+
+int wwan_perst_do_reset(int modem_nr);
+int wwan_perst_init(void);

firmware/libboard/qmod/source/board_qmod.c

@@ -0,0 +1,201 @@
+/* Quad-modem speciic application code */
+/* (C) 2016-2016 by Harald Welte <laforge@gnumonks.org> */
+
+#include "board.h"
+#include "simtrace.h"
+#include "utils.h"
+#include "req_ctx.h"
+#include "wwan_led.h"
+#include "wwan_perst.h"
+#include "boardver_adc.h"
+#include "osmocom/core/timer.h"
+
+static const Pin pin_hubpwr_override = PIN_PRTPWR_OVERRIDE;
+static const Pin pin_hub_rst = {PIO_PA13, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT};
+static const Pin pin_1234_detect = {PIO_PA14, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP};
+static const Pin pin_peer_rst = {PIO_PA0, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT};
+static const Pin pin_peer_erase = {PIO_PA11, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT};
+
+
+static int qmod_sam3_is_12(void)
+{
+	if (PIO_Get(&pin_1234_detect) == 0)
+		return 1;
+	else
+		return 0;
+}
+
+const unsigned char __eeprom_bin[256] = {
+	0x23, 0x42, 0x17, 0x25, 0x00, 0x00, 0x9b, 0x20, 0x01, 0x00, 0x00, 0x00, 0x32, 0x32, 0x32, 0x32, /* 0x00 - 0x0f */
+	0x32, 0x04, 0x09, 0x18, 0x0d, 0x00, 0x73, 0x00, 0x79, 0x00, 0x73, 0x00, 0x6d, 0x00, 0x6f, 0x00, /* 0x10 - 0x1f */
+	0x63, 0x00, 0x6f, 0x00, 0x6d, 0x00, 0x20, 0x00, 0x2d, 0x00, 0x20, 0x00, 0x73, 0x00, 0x2e, 0x00, /* 0x20 - 0x2f */
+	0x66, 0x00, 0x2e, 0x00, 0x6d, 0x00, 0x2e, 0x00, 0x63, 0x00, 0x2e, 0x00, 0x20, 0x00, 0x47, 0x00, /* 0x30 - 0x3f */
+	0x6d, 0x00, 0x62, 0x00, 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x40 - 0x4f */
+	0x00, 0x00, 0x00, 0x00, 0x71, 0x00, 0x75, 0x00, 0x61, 0x00, 0x64, 0x00, 0x20, 0x00, 0x6d, 0x00, /* 0x50 - 0x5f */
+	0x6f, 0x00, 0x64, 0x00, 0x65, 0x00, 0x6d, 0x00, 0x20, 0x00, 0x76, 0x00, 0x32, 0x00, 0x00, 0x00, /* 0x60 - 0x6f */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x70 - 0x7f */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x80 - 0x8f */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x90 - 0x9f */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xa0 - 0xaf */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xb0 - 0xbf */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 - 0xcf */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xd0 - 0xdf */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xe0 - 0xef */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xA0, 0x56, 0x23, 0x71, 0x04, 0x00, /* 0xf0 - 0xff */
+};
+
+#include "i2c.h"
+static int write_hub_eeprom(void)
+{
+	const unsigned int __eeprom_bin_len = 256;
+
+	int i;
+
+	/* wait */
+	volatile int v;
+	/* 440ns per cycle here */
+	for (i = 0; i < 1000000; i++) {
+		v = 0;
+	}
+
+	TRACE_INFO("Writing EEPROM...\r\n");
+	/* write the EEPROM once */
+	for (i = 0; i < 256; i++) {
+		int rc = eeprom_write_byte(0x50, i, __eeprom_bin[i]);
+		/* if the result was negative, repeat that write */
+		if (rc < 0)
+			i--;
+	}
+
+	/* then pursue re-reading it again and again */
+	TRACE_INFO("Verifying EEPROM...\r\n");
+	for (i = 0; i < 256; i++) {
+		int byte = eeprom_read_byte(0x50, i);
+		TRACE_INFO("0x%02x: %02x\r\n", i, byte);
+		if (byte != __eeprom_bin[i])
+			TRACE_ERROR("Byte %u is wrong, expected 0x%02x, found 0x%02x\r\n",
+					i, __eeprom_bin[i], byte);
+	}
+
+	/* FIXME: Release PIN_PRTPWR_OVERRIDE after we know the hub is
+	 * again powering us up */
+
+	return 0;
+}
+
+/* returns '1' in case we should break any endless loop */
+void board_exec_dbg_cmd(int ch)
+{
+	uint32_t addr, val;
+
+	switch (ch) {
+	case '?':
+		printf("\t?\thelp\r\n");
+		printf("\tE\tprogram EEPROM\r\n");
+		printf("\tR\treset SAM3\r\n");
+		printf("\tO\tEnable PRTPWR_OVERRIDE\r\n");
+		printf("\to\tDisable PRTPWR_OVERRIDE\r\n");
+		printf("\tH\tRelease HUB RESET (high)\r\n");
+		printf("\th\tAssert HUB RESET (low)\r\n");
+		printf("\tw\tWrite single byte in EEPROM\r\n");
+		printf("\tr\tRead single byte from EEPROM\r\n");
+		printf("\tX\tRelease peer SAM3 from reset\r\n");
+		printf("\tx\tAssert peer SAM3 reset\r\n");
+		printf("\tY\tRelease peer SAM3 ERASE signal\r\n");
+		printf("\ty\tAssert peer SAM3 ERASE signal\r\n");
+		printf("\tU\tProceed to USB Initialization\r\n");
+		printf("\t1\tGenerate 1ms reset pulse on WWAN1\r\n");
+		printf("\t2\tGenerate 1ms reset pulse on WWAN2\r\n");
+		break;
+	case 'E':
+		write_hub_eeprom();
+		break;
+	case 'R':
+		printf("Asking NVIC to reset us\r\n");
+		NVIC_SystemReset();
+		break;
+	case 'O':
+		printf("Setting PRTPWR_OVERRIDE\r\n");
+		PIO_Set(&pin_hubpwr_override);
+		break;
+	case 'o':
+		printf("Clearing PRTPWR_OVERRIDE\r\n");
+		PIO_Clear(&pin_hubpwr_override);
+		break;
+	case 'H':
+		printf("Clearing _HUB_RESET -> HUB_RESET high (inactive)\r\n");
+		PIO_Clear(&pin_hub_rst);
+		break;
+	case 'h':
+		/* high level drives transistor -> HUB_RESET low */
+		printf("Asserting _HUB_RESET -> HUB_RESET low (active)\r\n");
+		PIO_Set(&pin_hub_rst);
+		break;
+	case 'w':
+		if (PIO_GetOutputDataStatus(&pin_hub_rst) == 0)
+			printf("WARNING: attempting EEPROM access while HUB not in reset\r\n");
+		printf("Please enter EEPROM offset:\r\n");
+		UART_GetIntegerMinMax(&addr, 0, 255);
+		printf("Please enter EEPROM value:\r\n");
+		UART_GetIntegerMinMax(&val, 0, 255);
+		printf("Writing value 0x%02x to EEPROM offset 0x%02x\r\n", val, addr);
+		eeprom_write_byte(0x50, addr, val);
+		break;
+	case 'r':
+		printf("Please enter EEPROM offset:\r\n");
+		UART_GetIntegerMinMax(&addr, 0, 255);
+		printf("EEPROM[0x%02x] = 0x%02x\r\n", addr, eeprom_read_byte(0x50, addr));
+		break;
+	case 'X':
+		printf("Clearing _SIMTRACExx_RST -> SIMTRACExx_RST high (inactive)\r\n");
+		PIO_Clear(&pin_peer_rst);
+		break;
+	case 'x':
+		printf("Setting _SIMTRACExx_RST -> SIMTRACExx_RST low (active)\r\n");
+		PIO_Set(&pin_peer_rst);
+		break;
+	case 'Y':
+		printf("Clearing SIMTRACExx_ERASE (inactive)\r\n");
+		PIO_Clear(&pin_peer_erase);
+		break;
+	case 'y':
+		printf("Seetting SIMTRACExx_ERASE (active)\r\n");
+		PIO_Set(&pin_peer_erase);
+		break;
+	case '1':
+		printf("Resetting Modem 1 (of this SAM3)\r\n");
+		wwan_perst_do_reset(1);
+		break;
+	case '2':
+		printf("Resetting Modem 2 (of this SAM3)\r\n");
+		wwan_perst_do_reset(2);
+		break;
+	default:
+		printf("Unknown command '%c'\r\n", ch);
+		break;
+	}
+}
+
+void board_main_top(void)
+{
+	wwan_led_init();
+	wwan_perst_init();
+
+	/* set PIN_PRTPWR_OVERRIDE to output-low to avoid the internal
+	 * pull-up on the input to keep SIMTRACE12 alive */
+	PIO_Configure(&pin_hubpwr_override, 1);
+	PIO_Configure(&pin_hub_rst, 1);
+	PIO_Configure(&pin_1234_detect, 1);
+	PIO_Configure(&pin_peer_rst, 1);
+	PIO_Configure(&pin_peer_erase, 1);
+	i2c_pin_init();
+
+	if (qmod_sam3_is_12()) {
+		TRACE_INFO("Detected Quad-Modem ST12\r\n");
+	} else {
+		TRACE_INFO("Detected Quad-Modem ST34\r\n");
+	}
+
+	/* Obtain the circuit board version (currently just prints voltage */
+	get_board_version_adc();
+}

firmware/libboard/qmod/source/i2c.c

@@ -0,0 +1,203 @@
+#include "board.h"
+#include <stdbool.h>
+
+/* Low-Level I2C Routines */
+
+static const Pin pin_sda = {PIO_PA30, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_OPENDRAIN };
+static const Pin pin_sda_in = {PIO_PA30, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT };
+static const Pin pin_scl = {PIO_PA31, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_OPENDRAIN };
+
+static void i2c_delay()
+{
+	volatile int v;
+	int i;
+
+	/* 100 cycles results in SCL peak length of 44us, so it's about
+	 * 440ns per cycle here */
+	for (i = 0; i < 14; i++) {
+		v = 0;
+	}
+}
+
+void i2c_pin_init(void)
+{
+	PIO_Configure(&pin_scl, PIO_LISTSIZE(pin_scl));
+	PIO_Configure(&pin_sda, PIO_LISTSIZE(pin_sda));
+}
+
+static void set_scl(void)
+{
+	PIO_Set(&pin_scl);
+	i2c_delay();
+}
+
+static void set_sda(void)
+{
+	PIO_Set(&pin_sda);
+	i2c_delay();
+}
+
+static void clear_scl(void)
+{
+	PIO_Clear(&pin_scl);
+	i2c_delay();
+}
+
+static void clear_sda(void)
+{
+	PIO_Clear(&pin_sda);
+	i2c_delay();
+}
+
+static bool read_sda(void)
+{
+	bool ret;
+
+	PIO_Configure(&pin_sda_in, PIO_LISTSIZE(pin_sda_in));
+	if (PIO_Get(&pin_sda_in))
+		ret = true;
+	else
+		ret = false;
+	PIO_Configure(&pin_sda, PIO_LISTSIZE(pin_sda));
+
+	return ret;
+}
+
+/* Core I2C Routines */
+
+static bool i2c_started = false;
+
+static void i2c_start_cond(void)
+{
+	if (i2c_started) {
+		set_sda();
+		set_scl();
+	}
+
+	clear_sda();
+	i2c_delay();
+	clear_scl();
+	i2c_started = true;
+}
+
+static void i2c_stop_cond(void)
+{
+	clear_sda();
+	set_scl();
+	set_sda();
+	i2c_delay();
+	i2c_started = false;
+}
+
+static void i2c_write_bit(bool bit)
+{
+	if (bit)
+		set_sda();
+	else
+		clear_sda();
+	i2c_delay(); // ?
+	set_scl();
+	clear_scl();
+}
+
+static bool i2c_read_bit(void)
+{
+	bool bit;
+
+	set_sda();
+	set_scl();
+	bit = read_sda();
+	clear_scl();
+
+	return bit;
+}
+
+bool i2c_write_byte(bool send_start, bool send_stop, uint8_t byte)
+{
+	uint8_t bit;
+	bool nack;
+
+	if (send_start)
+		i2c_start_cond();
+
+	for (bit = 0; bit < 8; bit++) {
+		i2c_write_bit((byte & 0x80) != 0);
+		byte <<= 1;
+	}
+
+	nack = i2c_read_bit();
+
+	if (send_stop)
+		i2c_stop_cond();
+
+	return nack;
+}
+
+uint8_t i2c_read_byte(bool nack, bool send_stop)
+{
+	uint8_t byte = 0;
+	uint8_t bit;
+
+	for (bit = 0; bit < 8; bit++) {
+		byte = (byte << 1) | i2c_read_bit();
+	}
+
+	i2c_write_bit(nack);
+
+	if (send_stop)
+		i2c_stop_cond();
+
+	return byte;
+}
+
+
+/* EEPROM related code */
+
+int eeprom_write_byte(uint8_t slave, uint8_t addr, uint8_t byte)
+{
+	bool nack;
+
+	/* Write slave address */
+	nack = i2c_write_byte(true, false, slave << 1);
+	if (nack)
+		goto out_stop;
+	nack = i2c_write_byte(false, false, addr);
+	if (nack)
+		goto out_stop;
+	nack = i2c_write_byte(false, true, byte);
+	if (nack)
+		goto out_stop;
+
+out_stop:
+	i2c_stop_cond();
+	if (nack)
+		return -1;
+	else
+		return 0;
+}
+
+int eeprom_read_byte(uint8_t slave, uint8_t addr)
+{
+	bool nack;
+
+	/* dummy write cycle */
+	nack = i2c_write_byte(true, false, slave << 1);
+	if (nack)
+		goto out_stop;
+	nack = i2c_write_byte(false, false, addr);
+	if (nack)
+		goto out_stop;
+	/* Re-start with read */
+	nack = i2c_write_byte(true, false, (slave << 1) | 1);
+	if (nack)
+		goto out_stop;
+
+	return i2c_read_byte(true, true);
+
+out_stop:
+	i2c_stop_cond();
+	if (nack)
+		return -1;
+	else
+		return 0;
+}

firmware/libboard/qmod/source/wwan_led.c

@@ -0,0 +1,80 @@
+/* Code to read/track the status of the WWAN LEDs of attached modems
+ *
+ * Depending on the board this is running on,  it might be possible
+ * for the controller to read the status of the WWAN LED output lines of
+ * the cellular modem.  If the board supports this, it sets the
+ * PIN_WWAN1 and/or PIN_WWAN2 defines in its board.h file.
+ */
+
+#include "board.h"
+#include "wwan_led.h"
+
+#ifdef PIN_WWAN1
+static const Pin pin_wwan1 = PIN_WWAN1;
+
+static void wwan1_irqhandler(const Pin *pPin)
+{
+	int active = wwan_led_active(1);
+
+	TRACE_INFO("WWAN1 LED %u\r\n", active);
+
+	/* TODO: notify host via USB */
+}
+#endif
+
+#ifdef PIN_WWAN2
+static const Pin pin_wwan2 = PIN_WWAN2;
+
+static void wwan2_irqhandler(const Pin *pPin)
+{
+	int active = wwan_led_active(2);
+	TRACE_INFO("WWAN2 LED %u\r\n", active);
+
+	/* TODO: notify host via USB */
+}
+#endif
+
+/* determine if a tiven WWAN led is currently active or not */
+int wwan_led_active(int wwan)
+{
+	const Pin *pin;
+	int active;
+
+	switch (wwan) {
+#ifdef PIN_WWAN1
+	case 1:
+		pin = &pin_wwan1;
+		break;
+#endif
+#ifdef PIN_WWAN2
+	case 2:
+		pin = &pin_wwan2;
+		break;
+#endif
+	default:
+		return -1;
+	}
+
+	active = PIO_Get(&pin_wwan1) ? 0 : 1;
+	return active;
+}
+
+int wwan_led_init(void)
+{
+	int num_leds = 0;
+
+#ifdef PIN_WWAN1
+	PIO_Configure(&pin_wwan1, 1);
+	PIO_ConfigureIt(&pin_wwan1, wwan1_irqhandler);
+	PIO_EnableIt(&pin_wwan1);
+	num_leds++;
+#endif
+
+#ifdef PIN_WWAN2
+	PIO_Configure(&pin_wwan2, 1);
+	PIO_ConfigureIt(&pin_wwan2, wwan2_irqhandler);
+	PIO_EnableIt(&pin_wwan2);
+	num_leds++;
+#endif
+	return num_leds;
+}

firmware/libboard/qmod/source/wwan_perst.c

@@ -0,0 +1,76 @@
+/* Code to control the PERST lines of attached modems
+ *
+ * Depending on the board this is running on,  it might be possible
+ * for the controller to set the status of the PERST input line of
+ * the cellular modem.  If the board supports this, it sets the
+ * PIN_PERST1 and/or PIN_PERST2 defines in its board.h file.
+ */
+
+#include "board.h"
+#include "wwan_perst.h"
+#include "osmocom/core/timer.h"
+
+#define PERST_DURATION_MS 300
+
+#ifdef PIN_PERST1
+static const Pin pin_perst1 = PIN_PERST1;
+static struct osmo_timer_list perst1_timer;
+#endif
+
+#ifdef PIN_PERST2
+static const Pin pin_perst2 = PIN_PERST2;
+static struct osmo_timer_list perst2_timer;
+#endif
+
+static void perst_tmr_cb(void *data)
+{
+	const Pin *pin = data;
+	/* release the (low-active) reset */
+	PIO_Clear(pin);
+}
+
+int wwan_perst_do_reset(int modem_nr)
+{
+	const Pin *pin;
+	struct osmo_timer_list *tmr;
+
+	switch (modem_nr) {
+#ifdef PIN_PERST1
+	case 1:
+		pin = &pin_perst1;
+		tmr = &perst1_timer;
+		break;
+#endif
+#ifdef PIN_PERST2
+	case 2:
+		pin = &pin_perst2;
+		tmr = &perst2_timer;
+		break;
+#endif
+	default:
+		return -1;
+	}
+	PIO_Set(pin);
+	osmo_timer_schedule(tmr, PERST_DURATION_MS/1000, (PERST_DURATION_MS%1000)*1000);
+
+	return 0;
+}
+
+int wwan_perst_init(void)
+{
+	int num_perst = 0;
+#ifdef PIN_PERST1
+	PIO_Configure(&pin_perst1, 1);
+	perst1_timer.cb = perst_tmr_cb;
+	perst1_timer.data = (void *) &pin_perst1;
+	num_perst++;
+#endif
+
+#ifdef PIN_PERST2
+	PIO_Configure(&pin_perst2, 1);
+	perst2_timer.cb = perst_tmr_cb;
+	perst2_timer.data = (void *) &pin_perst2;
+	num_perst++;
+#endif
+	return num_perst;
+}

firmware/libboard/simtrace/include/board.h

@@ -1,59 +1,12 @@
-#ifndef _BOARD_
-#define _BOARD_
-
-/**     Headers     */
-#include "chip.h"
-/* We need this for a nop instruction in USB_HAL.c */
-#define __CC_ARM
-
-/**     Board       */
-#include "board_lowlevel.h"
-#include "uart_console.h"
-#include "iso7816_4.h"
-#include "led.h"
-#include "cciddriver.h"
-#include "usart.h"
-#include "USBD.h"
-
-#include "USBD_Config.h"
-#include "USBDDriver.h"
-
-/**     Highlevel   */
-#include "trace.h"
-#include "stdio.h"
-#include "stdlib.h"
-#include "string.h"
-#include "inttypes.h"
-
-#include "simtrace.h"
-
-#define MIN(a, b)       ((a < b) ? a : b)
-
-#ifdef __GNUC__ 
-#undef __GNUC__ 
-#endif
+#pragma once
+#include "board_common.h"
 
 /** Name of the board */
 #define BOARD_NAME "SAM3S-SIMTRACE"
 /** Board definition */
 #define simtrace
-/** Family definition (already defined) */
-#define sam3s
-/** Core definition */
-#define cortexm3
 
-#define BOARD_MAINOSC 18432000 
-#define BOARD_MCK     48000000
-
-#define LED_RED PIO_PA17
-#define LED_GREEN PIO_PA18
-
-#define PIN_LED_RED     {LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define PIN_LED_GREEN   {LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-#define PINS_LEDS       PIN_LED_RED, PIN_LED_GREEN 
-
-#define LED_NUM_RED     0
-#define LED_NUM_GREEN   1
+#define BOARD_MAINOSC 18432000
 
 /** Phone (SIM card emulator)/CCID Reader/MITM configuration    **/
 /*  Normally the communication lines between phone and SIM card are disconnected    */
@@ -72,44 +25,6 @@
 
 #define PINS_SIM_SNIFF_SIM      PIN_PHONE_IO,  PIN_PHONE_CLK
 
-
-
-/** USART0 pin RX */
-#define PIN_USART0_RXD    {PIO_PA9A_URXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
-/** USART0 pin TX */
-#define PIN_USART0_TXD    {PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
-
-#define BOARD_PIN_USART_RXD     PIN_USART0_RXD
-#define BOARD_PIN_USART_TXD     PIN_USART0_TXD
-
-#define BOARD_ID_USART          ID_USART0
-#define BOARD_USART_BASE        USART0
-
-#define PINS_UART  { PIO_PA9A_URXD0|PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
-
-/** UART0 */
-/** Console baudrate always using 115200. */
-#define CONSOLE_BAUDRATE    115200
-/** Usart Hw interface used by the console (UART0). */
-#define CONSOLE_USART       UART0
-/** Usart Hw ID used by the console (UART0). */
-#define CONSOLE_ID          ID_UART0
-/** Pins description corresponding to Rxd,Txd, (UART pins) */
-#define CONSOLE_PINS        {PINS_UART}
-
-/// Smartcard detection pin
-// FIXME: add connect pin as iso pin...should it be periph b or interrupt oder input?
-#define BOARD_ISO7816_BASE_USART    USART0
-#define BOARD_ISO7816_ID_USART      ID_USART0
-
-#define USART_SIM       USART0
-#define ID_USART_SIM    ID_USART0
-#define USART_PHONE       USART1
-#define ID_USART_PHONE    ID_USART1
-
-#define SIM_PWEN        PIO_PA5
-#define VCC_FWD         PIO_PA26
-
 #define SIM_PWEN_PIN            {PIO_PA5, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
 
 #define PWR_PINS                                                         \
@@ -118,7 +33,6 @@
     /* Enable second power converter: VCC_PHONE to VCC_SIM; high: on */ \
     {VCC_FWD, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
 
-
 #define SW_SIM      PIO_PA8
 #define SMARTCARD_CONNECT_PIN {SW_SIM, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_DEGLITCH | PIO_IT_EDGE }
 //#define SMARTCARD_CONNECT_PIN {SW_SIM, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_EDGE}
@@ -160,31 +74,12 @@
 /// SPI chip select 0 pin definition (PA11).
 #define PIN_SPI_NPCS0  {1 << 11, PIOA, PIOA, PIO_PERIPH_A, PIO_DEFAULT}
 
-//**     USB **/
-// USB pull-up control pin definition (PA16).
-// Default: 1 (USB Pullup deactivated) 
-#define PIN_USB_PULLUP  {1 << 16, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
-
-// Board has UDP controller
-#define BOARD_USB_UDP
-// D+ has external pull-up
-#define BOARD_USB_PULLUP_EXTERNAL
-
-#define BOARD_USB_NUMENDPOINTS      8
-
-// FIXME: in all other cases return 0?
-#define BOARD_USB_ENDPOINTS_MAXPACKETSIZE(i)    (((i == 4) || (i == 5))? 512 : 64)
-#define BOARD_USB_ENDPOINTS_BANKS(i)            (((i == 0) || (i == 3)) ? 1 : 2)
-
-/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
-//#define BOARD_USB_BMATTRIBUTES                  USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
-#define BOARD_USB_BMATTRIBUTES                  USBConfigurationDescriptor_BUSPOWERED_NORWAKEUP
-//#define BOARD_USB_BMATTRIBUTES                  USBConfigurationDescriptor_SELFPOWERED_RWAKEUP
-
-#define SIMTRACE_VENDOR_ID          0x16c0
-#define SIMTRACE_PRODUCT_ID         0x0762
-#define USB_VENDOR_ID               OPENPCD_VENDOR_ID
+#define SIMTRACE_VENDOR_ID          0x1d50
+#define SIMTRACE_PRODUCT_ID         0x60e3
+#define USB_VENDOR_ID               SIMTRACE_VENDOR_ID
 #define USB_PRODUCT_ID              SIMTRACE_PRODUCT_ID
 
-
-#endif
+#define HAVE_SNIFFER
+#define HAVE_CCID
+#define HAVE_CARDEM
+#define HAVE_MITM

firmware/libcommon/include/assert.h

@@ -0,0 +1,115 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support 
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2008, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+//------------------------------------------------------------------------------
+/// \unit
+///
+/// !Purpose
+///
+/// Definition of the ASSERT() and SANITY_CHECK() macros, which are used for
+/// runtime condition & parameter verifying.
+///
+/// !Usage
+///
+/// -# Use ASSERT() in your code to check the value of function parameters,
+///    return values, etc. *Warning:* the ASSERT() condition must not have
+///    any side-effect; otherwise, the program may not work properly
+///    anymore when assertions are disabled.
+/// -# Use SANITY_CHECK() to perform checks with a default error message
+///    (outputs the file and line number where the error occured). This 
+///    reduces memory overhead caused by assertion error strings.
+/// -# Initialize the dbgu to see failed assertions at run-time.
+/// -# Assertions can be entirely disabled by defining the NOASSERT symbol
+///    at compilation time.
+//------------------------------------------------------------------------------
+
+#ifndef ASSERT_H
+#define ASSERT_H
+
+//------------------------------------------------------------------------------
+//         Headers
+//------------------------------------------------------------------------------
+
+#include <stdio.h>
+#include "trace.h"
+
+#define assert ASSERT
+
+//------------------------------------------------------------------------------
+//         Definitions
+//------------------------------------------------------------------------------
+#if defined(NOASSERT)
+    #define ASSERT(...)
+    #define SANITY_CHECK(...)
+#else
+
+    #if (TRACE_LEVEL == 0)
+        /// Checks that the given condition is true, 
+        /// otherwise stops the program execution.
+        /// \param condition  Condition to verify.
+        #define ASSERT(condition)  { \
+            if (!(condition)) { \
+                while (1); \
+            } \
+        }
+
+        /// Performs the same duty as the ASSERT() macro
+        /// \param condition  Condition to verify.
+        #define SANITY_CHECK(condition) ASSERT(condition, ...)
+
+    #else
+        /// Checks that the given condition is true, otherwise displays an error
+        /// message and stops the program execution.
+        /// \param condition  Condition to verify.
+        #define ASSERT(condition)  { \
+            if (!(condition)) { \
+                printf("-F- ASSERT: %s %s:%d\r\n", #condition, __BASE_FILE__, __LINE__); \
+                while (1); \
+            } \
+        }
+        #define SANITY_ERROR            "Sanity check failed at %s:%d\n\r"
+    
+        /// Performs the same duty as the ASSERT() macro, except a default error
+        /// message is output if the condition is false.
+        /// \param condition  Condition to verify.
+        #define SANITY_CHECK(condition) ASSERT(condition, SANITY_ERROR, __FILE__, __LINE__)
+    #endif
+#endif
+
+
+
+
+
+
+
+
+
+
+#endif //#ifndef ASSERT_H
+

firmware/libcommon/include/card_emu.h

@@ -0,0 +1,38 @@
+#pragma once
+
+#include <stdint.h>
+
+struct card_handle;
+
+enum card_io {
+	CARD_IO_VCC,
+	CARD_IO_RST,
+	CARD_IO_CLK,
+};
+
+struct card_handle *card_emu_init(uint8_t slot_num, uint8_t tc_chan, uint8_t uart_chan);
+
+/* process a single byte received from the reader */
+void card_emu_process_rx_byte(struct card_handle *ch, uint8_t byte);
+
+/* transmit a single byte to the reader */
+int card_emu_tx_byte(struct card_handle *ch);
+
+/* hardware driver informs us that a card I/O signal has changed */
+void card_emu_io_statechg(struct card_handle *ch, enum card_io io, int active);
+
+/* User sets a new ATR to be returned during next card reset */
+int card_emu_set_atr(struct card_handle *ch, const uint8_t *atr, uint8_t len);
+
+struct llist_head *card_emu_get_uart_tx_queue(struct card_handle *ch);
+struct llist_head *card_emu_get_usb_tx_queue(struct card_handle *ch);
+void card_emu_have_new_uart_tx(struct card_handle *ch);
+void card_emu_report_status(struct card_handle *ch);
+
+#define ENABLE_TX	0x01
+#define ENABLE_RX	0x02
+
+int card_emu_uart_update_fidi(uint8_t uart_chan, unsigned int fidi);
+int card_emu_uart_tx(uint8_t uart_chan, uint8_t byte);
+void card_emu_uart_enable(uint8_t uart_chan, uint8_t rxtx);
+void card_emu_uart_wait_tx_idle(uint8_t uart_chan);

firmware/libcommon/include/cardemu_prot.h

@@ -0,0 +1,135 @@
+#pragma once
+
+/* Smart Card Emulation USB protocol */
+
+/* (C) 2015 by Harald Welte <hwelte@hmw-consulting.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <stdint.h>
+
+/* DT = Device Terminated. DO = Device Originated */
+enum cardemu_usb_msg_type {
+	/* Bulk out pipe */
+	CEMU_USB_MSGT_DT_TX_DATA,	/* TPDU Date */
+	CEMU_USB_MSGT_DT_SET_ATR,	/* Set the ATR stored in simulator */
+	CEMU_USB_MSGT_DT_GET_STATS,	/* request DO_STATS */
+	CEMU_USB_MSGT_DT_GET_STATUS,	/* request DO_STATUS */
+	CEMU_USB_MSGT_DT_CARDINSERT,	/* insert/remove card */
+
+	/* Bulk in pipe */
+	CEMU_USB_MSGT_DO_RX_DATA,	/* TPDU data */
+	CEMU_USB_MSGT_DO_STATUS,	/* Status information */
+	CEMU_USB_MSGT_DO_STATS,		/* Statistics */
+	CEMU_USB_MSGT_DO_PTS,		/* Information about PTS */
+	CEMU_USB_MSGT_DO_ERROR,		/* Error message */
+};
+
+/* generic header, shared by all messages */
+struct cardemu_usb_msg_hdr {
+	uint8_t msg_type;	/* enum cardemu_usb_msg_type */
+	uint8_t seq_nr;		/* sequence number */
+	uint16_t msg_len;	/* length of message including hdr */
+	uint8_t data[0];
+} __attribute__ ((packed));
+
+/* indicates a TPDU header is present in this message */
+#define CEMU_DATA_F_TPDU_HDR	0x00000001
+/* indicates last part of transmission in this direction */
+#define CEMU_DATA_F_FINAL	0x00000002
+/* incdicates a PB is present and we should continue with TX */
+#define CEMU_DATA_F_PB_AND_TX	0x00000004
+/* incdicates a PB is present and we should continue with RX */
+#define CEMU_DATA_F_PB_AND_RX	0x00000008
+
+/* CEMU_USB_MSGT_DT_CARDINSERT */
+struct cardemu_usb_msg_cardinsert {
+	struct cardemu_usb_msg_hdr hdr;
+	uint8_t card_insert;
+} __attribute__ ((packed));
+
+/* CEMU_USB_MSGT_DT_SET_ATR */
+struct cardemu_usb_msg_set_atr {
+	struct cardemu_usb_msg_hdr hdr;
+	uint8_t atr_len;
+	/* variable-length ATR data */
+	uint8_t atr[0];
+} __attribute__ ((packed));
+
+/* CEMU_USB_MSGT_DT_TX_DATA */
+struct cardemu_usb_msg_tx_data {
+	struct cardemu_usb_msg_hdr hdr;
+	uint32_t flags;
+	uint16_t data_len;
+	/* variable-length TPDU data */
+	uint8_t data[0];
+} __attribute__ ((packed));
+
+/* CEMU_USB_MSGT_DO_RX_DATA */
+struct cardemu_usb_msg_rx_data {
+	struct cardemu_usb_msg_hdr hdr;
+	uint32_t flags;
+	uint16_t data_len;
+	/* variable-length TPDU data */
+	uint8_t data[0];
+} __attribute__ ((packed));
+
+#define CEMU_STATUS_F_VCC_PRESENT	0x00000001
+#define CEMU_STATUS_F_CLK_ACTIVE	0x00000002
+#define CEMU_STATUS_F_RCEMU_ACTIVE	0x00000004
+#define CEMU_STATUS_F_CARD_INSERT	0x00000008
+#define CEMU_STATUS_F_RESET_ACTIVE	0x00000010
+
+/* CEMU_USB_MSGT_DO_STATUS */
+struct cardemu_usb_msg_status {
+	struct cardemu_usb_msg_hdr hdr;
+	uint32_t flags;
+	/* phone-applied target voltage in mV */
+	uint16_t voltage_mv;
+	/* Fi/Di related information */
+	uint8_t fi;
+	uint8_t di;
+	uint8_t wi;
+	uint32_t waiting_time;
+} __attribute__ ((packed));
+
+/* CEMU_USB_MSGT_DO_PTS */
+struct cardemu_usb_msg_pts_info {
+	struct cardemu_usb_msg_hdr hdr;
+	uint8_t pts_len;
+	/* PTS request as sent from reader */
+	uint8_t req[6];
+	/* PTS response as sent by card */
+	uint8_t resp[6];
+} __attribute__ ((packed));
+
+/* CEMU_USB_MSGT_DO_ERROR */
+struct cardemu_usb_msg_error {
+	struct cardemu_usb_msg_hdr hdr;
+	uint8_t severity;
+	uint8_t subsystem;
+	uint16_t code;
+	uint8_t msg_len;
+	/* human-readable error message */
+	uint8_t msg[0];
+} __attribute__ ((packed));
+
+static inline void cardemu_hdr_set(struct cardemu_usb_msg_hdr *hdr, uint16_t msgt)
+{
+	memset(hdr, 0, sizeof(*hdr));
+	hdr->msg_type = msgt;
+}

firmware/libcommon/include/iso7816_fidi.h

@@ -0,0 +1,6 @@
+#pragma once
+
+#include <stdint.h>
+
+/* compute the F/D ratio based on Fi and Di values */
+int compute_fidi_ratio(uint8_t fi, uint8_t di);

firmware/libcommon/include/llist_irqsafe.h

@@ -0,0 +1,27 @@
+#pragma once
+
+#include "osmocom/core/linuxlist.h"
+
+static inline void llist_add_tail_irqsafe(struct llist_head *_new,
+					  struct llist_head *head)
+{
+	__disable_irq();
+	llist_add_tail(_new, head);
+	__enable_irq();
+}
+
+static inline struct llist_head *llist_head_dequeue_irqsafe(struct llist_head *head)
+{
+	struct llist_head *lh;
+
+	__disable_irq();
+	if (llist_empty(head)) {
+		lh = NULL;
+	} else {
+		lh = head->next;
+		llist_del(lh);
+	}
+	__enable_irq();
+
+	return lh;
+}

firmware/libcommon/include/req_ctx.h

@@ -0,0 +1,61 @@
+#pragma once
+
+#define RCTX_SIZE_LARGE	960
+#define RCTX_SIZE_SMALL	320
+#define MAX_HDRSIZE	sizeof(struct openpcd_hdr)
+
+#include <stdint.h>
+#include "osmocom/core/linuxlist.h"
+
+#define __ramfunc
+
+enum req_ctx_state {
+	/* free to be allocated */
+	RCTX_S_FREE,
+
+	/* USB -> UART */
+	/* In USB driver, waiting for data from host */
+	RCTX_S_USB_RX_BUSY,
+	/* somewhere in the main loop */
+	RCTX_S_MAIN_PROCESSING,
+	/* pending (in queue) for transmission on UART */
+	RCTX_S_UART_TX_PENDING,
+	/* currently in active transmission on UART */
+	RCTX_S_UART_TX_BUSY,
+
+	/* UART -> USB */
+	/* currently in active reception on UART */
+	RCTX_S_UART_RX_BUSY,
+	/* pending (in queue) for transmission over USB to host */
+	RCTX_S_USB_TX_PENDING,
+	/* currently in transmission over USB to host */
+	RCTX_S_USB_TX_BUSY,
+
+	/* number of states */
+	RCTX_STATE_COUNT
+};
+
+struct req_ctx {
+	/* if this req_ctx is on a queue... */
+	struct llist_head list;
+	uint32_t ep;
+
+	/* enum req_ctx_state */
+	volatile uint32_t state;
+	/* size of th 'data' buffer */
+	uint16_t size;
+	/* total number of used bytes in buffer */
+	uint16_t tot_len;
+	/* index into the buffer, user specific */
+	uint16_t idx;
+	/* actual data buffer */
+	uint8_t *data;
+};
+
+extern void req_ctx_init(void);
+extern struct req_ctx __ramfunc *req_ctx_find_get(int large, uint32_t old_state, uint32_t new_state);
+extern struct req_ctx *req_ctx_find_busy(void);
+extern void req_ctx_set_state(struct req_ctx *ctx, uint32_t new_state);
+extern void req_ctx_put(struct req_ctx *ctx);
+extern uint8_t req_ctx_num(struct req_ctx *ctx);
+unsigned int req_ctx_count(uint32_t state);

firmware/libcommon/include/ringbuffer.h

@@ -0,0 +1,23 @@
+#ifndef SIMTRACE_RINGBUF_H
+#define SIMTRACE_RINGBUF_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <sys/types.h>
+
+#define RING_BUFLEN 128
+
+typedef struct ringbuf {
+	uint8_t buf[RING_BUFLEN];
+	size_t ird;
+	size_t iwr;
+} ringbuf;
+
+void rbuf_reset(volatile ringbuf * rb);
+uint8_t rbuf_read(volatile ringbuf * rb);
+uint8_t rbuf_peek(volatile ringbuf * rb);
+void rbuf_write(volatile ringbuf * rb, uint8_t item);
+bool rbuf_is_empty(volatile ringbuf * rb);
+bool rbuf_is_full(volatile ringbuf * rb);
+
+#endif /* end of include guard: SIMTRACE_RINGBUF_H */

firmware/libcommon/include/simtrace.h

@@ -2,6 +2,7 @@
 #define SIMTRACE_H
 
 #include "ringbuffer.h"
+#include "board.h"
 
 /* Endpoint numbers */
 #define DATAOUT     1
@@ -14,6 +15,10 @@
 #define PHONE_DATAIN      5
 #define PHONE_INT         6
 
+#define CARDEM_USIM2_DATAOUT	DATAOUT
+#define CARDEM_USIM2_DATAIN	DATAIN
+#define CARDEM_USIM2_INT	INT
+
 #define CLK_MASTER      true
 #define CLK_SLAVE       false
 
@@ -29,12 +34,24 @@ extern volatile ringbuf sim_rcv_buf;
 
 extern volatile bool rcvdChar;
 extern volatile uint32_t char_stat;
-extern volatile enum confNum simtrace_config;
 
 extern const Pin pinPhoneRST;
 
 enum confNum {
-    CFG_NUM_SNIFF = 1, CFG_NUM_CCID, CFG_NUM_PHONE, CFG_NUM_MITM, NUM_CONF
+	CFG_NUM_NONE	= 0,
+#ifdef HAVE_SNIFFER
+	CFG_NUM_SNIFF,
+#endif
+#ifdef HAVE_CCID
+	CFG_NUM_CCID,
+#endif
+#ifdef HAVE_CARDEM
+	CFG_NUM_PHONE,
+#endif
+#ifdef HAVE_MITM
+	CFG_NUM_MITM,
+#endif
+	NUM_CONF
 };
 
 /// CCIDDriverConfiguration Descriptors
@@ -66,13 +83,13 @@ void ISR_PhoneRST( const Pin *pPin);
 /*  Configure functions   */
 extern void Sniffer_configure( void );
 extern void CCID_configure( void );
-extern void Phone_configure( void );
+extern void mode_cardemu_configure(void);
 extern void MITM_configure( void );
 
 /*  Init functions   */
 extern void Sniffer_init( void );
 extern void CCID_init( void );
-extern void Phone_init( void );
+extern void mode_cardemu_init(void);
 extern void MITM_init( void );
 
 extern void SIMtrace_USB_Initialize( void );
@@ -80,17 +97,24 @@ extern void SIMtrace_USB_Initialize( void );
 /*  Exit functions   */
 extern void Sniffer_exit( void );
 extern void CCID_exit( void );
-extern void Phone_exit( void );
+extern void mode_cardemu_exit(void);
 extern void MITM_exit( void );
 
 /*  Run functions   */
 extern void Sniffer_run( void );
 extern void CCID_run( void );
-extern void Phone_run( void );
+extern void mode_cardemu_run(void);
 extern void MITM_run( void );
 
+extern void mode_cardemu_usart0_irq(void);
+extern void mode_cardemu_usart1_irq(void);
+
 /*  Timer helper function */
 void Timer_Init( void );
 void TC0_Counter_Reset( void );
 
+struct llist_head;
+int usb_refill_to_host(struct llist_head *queue, uint32_t ep);
+int usb_refill_from_host(struct llist_head *queue, int ep);
+
 #endif  /*  SIMTRACE_H  */

firmware/libcommon/include/stdio.h

@@ -0,0 +1,32 @@
+#pragma once
+#include <stddef.h>
+#include <stdarg.h>
+
+
+#ifndef EOF
+#define EOF (-1)
+#endif
+
+struct File;
+typedef struct File FILE;
+
+extern FILE* const stdin;
+extern FILE* const stdout;
+extern FILE* const stderr;
+
+signed int vsnprintf(char *pStr, size_t length, const char *pFormat, va_list ap);
+signed int snprintf(char *pString, size_t length, const char *pFormat, ...);
+signed int vsprintf(char *pString, const char *pFormat, va_list ap);
+signed int vfprintf(FILE *pStream, const char *pFormat, va_list ap);
+signed int vprintf(const char *pFormat, va_list ap);
+signed int fprintf(FILE *pStream, const char *pFormat, ...);
+signed int printf(const char *pFormat, ...);
+signed int sprintf(char *pStr, const char *pFormat, ...);
+signed int puts(const char *pStr);
+
+
+int fputc(int c, FILE *stream);
+int fputs(const char *s, FILE *stream);
+
+#define putc(c, stream) fputc(c, stream)
+#define putchar(c) fputc(c, stdout)

firmware/libcommon/include/syscalls.h

@@ -50,8 +50,6 @@
 
 extern caddr_t _sbrk ( int incr ) ;
 
-extern int link( char *old, char *new ) ;
-
 extern int _close( int file ) ;
 
 extern int _fstat( int file, struct stat *st ) ;
@@ -63,3 +61,5 @@ extern int _lseek( int file, int ptr, int dir ) ;
 extern int _read(int file, char *ptr, int len) ;
 
 extern int _write( int file, char *ptr, int len ) ;
+
+extern void mdelay(unsigned int msecs);

firmware/libcommon/include/tc_etu.h

@@ -0,0 +1,11 @@
+#pragma once
+
+#include <stdint.h>
+void tc_etu_set_wtime(uint8_t chan_nr, uint16_t wtime);
+void tc_etu_set_etu(uint8_t chan_nr, uint16_t etu);
+void tc_etu_init(uint8_t chan_nr, void *handle);
+void tc_etu_enable(uint8_t chan_nr);
+void tc_etu_disable(uint8_t chan_nr);
+
+extern void tc_etu_wtime_half_expired(void *handle);
+extern void tc_etu_wtime_expired(void *handle);